| # do not edit this file, it will be overwritten on update |
| |
| # Tag any devices that MM might be interested in; if ModemManager is started |
| # up right after udev, when MM explicitly requests devices on startup it may |
| # get devices that haven't had all rules run yet. Thus, we tag devices we're |
| # interested in and when handling devices during MM startup we ignore any |
| # that don't have this tag. MM will still get the udev 'add' event for the |
| # device a short while later and then process it as normal. |
| |
| ACTION!="add|change|move|bind", GOTO="mm_candidate_end" |
| |
| # Opening bound but disconnected Bluetooth RFCOMM ttys would initiate the |
| # connection. Don't do that. |
| KERNEL=="rfcomm*", DEVPATH=="*/virtual/*", GOTO="mm_candidate_end" |
| |
| # All Qualcomm-based USB devices may switch to a recovery layout with a single |
| # serial port in QDL mode if they fail to boot correctly too many times. |
| SUBSYSTEMS=="usb", ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9008", ENV{ID_MM_DEVICE_IGNORE}="1" |
| |
| # Generic candidate rules for tty/usbmisc/net subsystems |
| SUBSYSTEM=="tty", ENV{ID_MM_CANDIDATE}="1" |
| SUBSYSTEM=="net", ENV{ID_MM_CANDIDATE}="1" |
| KERNEL=="cdc-wdm*", SUBSYSTEM=="usbmisc", ENV{ID_MM_CANDIDATE}="1" |
| |
| # WWAN subsystem candidate rules |
| # - All USB devices ignored for now, only PCI devices expected |
| # - Only "wwan_port" device types processed (single ports); we fully ignore |
| # the "wwan_dev" device type (full device, not just one port) |
| SUBSYSTEMS=="usb", GOTO="mm_candidate_end" |
| SUBSYSTEM=="wwan", ENV{DEVTYPE}=="wwan_dev", GOTO="mm_candidate_end" |
| SUBSYSTEM=="wwan", ENV{ID_MM_CANDIDATE}="1" |
| |
| LABEL="mm_candidate_end" |
