| /* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ |
| /* |
| * mmcli -- Control modem status & access information from the command line |
| * |
| * This program is free software: you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation, either version 3 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| * Copyright (C) 2011 Aleksander Morgado <aleksander@gnu.org> |
| */ |
| |
| #include "config.h" |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <locale.h> |
| |
| #include <glib.h> |
| #include <gio/gio.h> |
| |
| #include <libmm-glib.h> |
| |
| #include "mmcli.h" |
| #include "mmcli-common.h" |
| |
| /* Context */ |
| typedef struct { |
| MMManager *manager; |
| GCancellable *cancellable; |
| MMObject *object; |
| MMModem *modem; |
| MMModem3gpp *modem_3gpp; |
| MMModemCdma *modem_cdma; |
| } Context; |
| static Context *ctx; |
| |
| /* Options */ |
| static gboolean info_flag; /* set when no action found */ |
| static gboolean monitor_state_flag; |
| static gboolean enable_flag; |
| static gboolean disable_flag; |
| static gboolean reset_flag; |
| static gchar *factory_reset_str; |
| static gchar *command_str; |
| static gint command_timeout; |
| static gboolean list_bearers_flag; |
| static gchar *create_bearer_str; |
| static gchar *delete_bearer_str; |
| static gchar *set_allowed_modes_str; |
| static gchar *set_preferred_mode_str; |
| static gchar *set_bands_str; |
| |
| static GOptionEntry entries[] = { |
| { "monitor-state", 'w', 0, G_OPTION_ARG_NONE, &monitor_state_flag, |
| "Monitor state of a given modem", |
| NULL |
| }, |
| { "enable", 'e', 0, G_OPTION_ARG_NONE, &enable_flag, |
| "Enable a given modem", |
| NULL |
| }, |
| { "disable", 'd', 0, G_OPTION_ARG_NONE, &disable_flag, |
| "Disable a given modem", |
| NULL |
| }, |
| { "reset", 'r', 0, G_OPTION_ARG_NONE, &reset_flag, |
| "Reset a given modem", |
| NULL |
| }, |
| { "factory-reset", 0, 0, G_OPTION_ARG_STRING, &factory_reset_str, |
| "Reset a given modem to its factory state", |
| "[CODE]" |
| }, |
| { "command", 0, 0, G_OPTION_ARG_STRING, &command_str, |
| "Send an AT command to the modem", |
| "[COMMAND]" |
| }, |
| { "command-timeout", 0, 0, G_OPTION_ARG_INT, &command_timeout, |
| "Timeout for AT command", |
| "[SECONDS]" |
| }, |
| { "list-bearers", 0, 0, G_OPTION_ARG_NONE, &list_bearers_flag, |
| "List packet data bearers available in a given modem", |
| NULL |
| }, |
| { "create-bearer", 0, 0, G_OPTION_ARG_STRING, &create_bearer_str, |
| "Create a new packet data bearer in a given modem", |
| "[\"key=value,...\"]" |
| }, |
| { "delete-bearer", 0, 0, G_OPTION_ARG_STRING, &delete_bearer_str, |
| "Delete a data bearer from a given modem", |
| "[PATH]" |
| }, |
| { "set-allowed-modes", 0, 0, G_OPTION_ARG_STRING, &set_allowed_modes_str, |
| "Set allowed modes in a given modem.", |
| "[MODE1|MODE2...]" |
| }, |
| { "set-bands", 0, 0, G_OPTION_ARG_STRING, &set_bands_str, |
| "Set bands to be used by a given modem.", |
| "[BAND1|BAND2...]" |
| }, |
| { "set-preferred-mode", 0, 0, G_OPTION_ARG_STRING, &set_preferred_mode_str, |
| "Set preferred mode in a given modem (Must give allowed modes with --set-allowed-modes)", |
| "[MODE]" |
| }, |
| { NULL } |
| }; |
| |
| GOptionGroup * |
| mmcli_modem_get_option_group (void) |
| { |
| GOptionGroup *group; |
| |
| /* Status options */ |
| group = g_option_group_new ("modem", |
| "Modem options", |
| "Show modem options", |
| NULL, |
| NULL); |
| g_option_group_add_entries (group, entries); |
| |
| return group; |
| } |
| |
| gboolean |
| mmcli_modem_options_enabled (void) |
| { |
| static guint n_actions = 0; |
| static gboolean checked = FALSE; |
| |
| if (checked) |
| return !!n_actions; |
| |
| n_actions = (monitor_state_flag + |
| enable_flag + |
| disable_flag + |
| reset_flag + |
| list_bearers_flag + |
| !!create_bearer_str + |
| !!delete_bearer_str + |
| !!factory_reset_str + |
| !!command_str + |
| !!set_allowed_modes_str + |
| !!set_preferred_mode_str + |
| !!set_bands_str); |
| |
| if (n_actions == 0 && mmcli_get_common_modem_string ()) { |
| /* default to info */ |
| info_flag = TRUE; |
| n_actions++; |
| } |
| |
| if (set_preferred_mode_str) { |
| if (!set_allowed_modes_str) { |
| g_printerr ("error: setting preferred mode requires list of allowed modes\n"); |
| exit (EXIT_FAILURE); |
| } |
| n_actions--; |
| } |
| |
| if (n_actions > 1) { |
| g_printerr ("error: too many modem actions requested\n"); |
| exit (EXIT_FAILURE); |
| } |
| |
| if (monitor_state_flag) |
| mmcli_force_async_operation (); |
| |
| if (info_flag) |
| mmcli_force_sync_operation (); |
| |
| checked = TRUE; |
| return !!n_actions; |
| } |
| |
| static void |
| context_free (Context *ctx) |
| { |
| if (!ctx) |
| return; |
| |
| if (ctx->cancellable) |
| g_object_unref (ctx->cancellable); |
| if (ctx->modem) |
| g_object_unref (ctx->modem); |
| if (ctx->modem_3gpp) |
| g_object_unref (ctx->modem_3gpp); |
| if (ctx->modem_cdma) |
| g_object_unref (ctx->modem_cdma); |
| if (ctx->object) |
| g_object_unref (ctx->object); |
| if (ctx->manager) |
| g_object_unref (ctx->manager); |
| g_free (ctx); |
| } |
| |
| void |
| mmcli_modem_shutdown (void) |
| { |
| context_free (ctx); |
| } |
| |
| static void |
| cancelled (GCancellable *cancellable) |
| { |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| print_bearer_short_info (MMBearer *bearer) |
| { |
| g_print ("\t%s\n", |
| mm_bearer_get_path (bearer)); |
| } |
| |
| static void |
| print_modem_info (void) |
| { |
| gchar *prefixed_revision; |
| gchar *capabilities_string; |
| gchar *access_technologies_string; |
| gchar *supported_modes_string; |
| gchar *allowed_modes_string; |
| gchar *preferred_mode_string; |
| gchar *supported_bands_string; |
| gchar *bands_string; |
| gchar *unlock_retries_string; |
| gchar *own_numbers_string; |
| MMModemBand *bands = NULL; |
| MMUnlockRetries *unlock_retries; |
| guint n_bands = 0; |
| |
| /* Not the best thing to do, as we may be doing _get() calls twice, but |
| * easiest to maintain */ |
| #undef VALIDATE_UNKNOWN |
| #define VALIDATE_UNKNOWN(str) (str ? str : "unknown") |
| #undef VALIDATE_PATH |
| #define VALIDATE_PATH(str) ((str && !g_str_equal (str, "/")) ? str : "none") |
| |
| /* Strings in heap */ |
| capabilities_string = mm_modem_capability_build_string_from_mask ( |
| mm_modem_get_modem_capabilities (ctx->modem)); |
| access_technologies_string = mm_modem_access_technology_build_string_from_mask ( |
| mm_modem_get_access_technologies (ctx->modem)); |
| mm_modem_get_bands (ctx->modem, &bands, &n_bands); |
| bands_string = mm_common_build_bands_string (bands, n_bands); |
| g_free (bands); |
| mm_modem_get_supported_bands (ctx->modem, &bands, &n_bands); |
| supported_bands_string = mm_common_build_bands_string (bands, n_bands); |
| g_free (bands); |
| allowed_modes_string = mm_modem_mode_build_string_from_mask ( |
| mm_modem_get_allowed_modes (ctx->modem)); |
| preferred_mode_string = mm_modem_mode_build_string_from_mask ( |
| mm_modem_get_preferred_mode (ctx->modem)); |
| supported_modes_string = mm_modem_mode_build_string_from_mask ( |
| mm_modem_get_supported_modes (ctx->modem)); |
| |
| unlock_retries = mm_modem_get_unlock_retries (ctx->modem); |
| unlock_retries_string = mm_unlock_retries_build_string (unlock_retries); |
| g_object_unref (unlock_retries); |
| |
| if (mm_modem_get_own_numbers (ctx->modem)) { |
| own_numbers_string = g_strjoinv (", ", (gchar **)mm_modem_get_own_numbers (ctx->modem)); |
| if (!own_numbers_string[0]) { |
| g_free (own_numbers_string); |
| own_numbers_string = NULL; |
| } |
| } else |
| own_numbers_string = NULL; |
| |
| /* Rework possible multiline strings */ |
| prefixed_revision = mmcli_prefix_newlines (" | ", |
| mm_modem_get_revision (ctx->modem)); |
| |
| /* Global IDs */ |
| g_print ("\n" |
| "%s (device id '%s')\n", |
| VALIDATE_UNKNOWN (mm_modem_get_path (ctx->modem)), |
| VALIDATE_UNKNOWN (mm_modem_get_device_identifier (ctx->modem))); |
| |
| /* Hardware related stuff */ |
| g_print (" -------------------------\n" |
| " Hardware | manufacturer: '%s'\n" |
| " | model: '%s'\n" |
| " | revision: '%s'\n" |
| " | capabilities: '%s'\n" |
| " | equipment id: '%s'\n", |
| VALIDATE_UNKNOWN (mm_modem_get_manufacturer (ctx->modem)), |
| VALIDATE_UNKNOWN (mm_modem_get_model (ctx->modem)), |
| VALIDATE_UNKNOWN (prefixed_revision), |
| VALIDATE_UNKNOWN (capabilities_string), |
| VALIDATE_UNKNOWN (mm_modem_get_equipment_identifier (ctx->modem))); |
| |
| /* System related stuff */ |
| g_print (" -------------------------\n" |
| " System | device: '%s'\n" |
| " | driver: '%s'\n" |
| " | plugin: '%s'\n", |
| VALIDATE_UNKNOWN (mm_modem_get_device (ctx->modem)), |
| VALIDATE_UNKNOWN (mm_modem_get_driver (ctx->modem)), |
| VALIDATE_UNKNOWN (mm_modem_get_plugin (ctx->modem))); |
| |
| /* Numbers related stuff */ |
| g_print (" -------------------------\n" |
| " Numbers | own : '%s'\n", |
| VALIDATE_UNKNOWN (own_numbers_string)); |
| |
| /* Status related stuff */ |
| g_print (" -------------------------\n" |
| " Status | lock: '%s'\n" |
| " | unlock retries: '%s'\n" |
| " | state: '%s'\n" |
| " | access tech: '%s'\n", |
| mm_modem_lock_get_string (mm_modem_get_unlock_required (ctx->modem)), |
| VALIDATE_UNKNOWN (unlock_retries_string), |
| VALIDATE_UNKNOWN (mm_modem_state_get_string (mm_modem_get_state (ctx->modem))), |
| VALIDATE_UNKNOWN (access_technologies_string)); |
| |
| /* Modes */ |
| g_print (" -------------------------\n" |
| " Modes | supported: '%s'\n" |
| " | allowed: '%s'\n" |
| " | preferred: '%s'\n", |
| VALIDATE_UNKNOWN (supported_modes_string), |
| VALIDATE_UNKNOWN (allowed_modes_string), |
| VALIDATE_UNKNOWN (preferred_mode_string)); |
| |
| /* Band related stuff */ |
| g_print (" -------------------------\n" |
| " Bands | supported: '%s'\n" |
| " | current: '%s'\n", |
| VALIDATE_UNKNOWN (supported_bands_string), |
| VALIDATE_UNKNOWN (bands_string)); |
| |
| /* If available, 3GPP related stuff */ |
| if (ctx->modem_3gpp) { |
| gchar *facility_locks; |
| |
| facility_locks = (mm_modem_3gpp_facility_build_string_from_mask ( |
| mm_modem_3gpp_get_enabled_facility_locks (ctx->modem_3gpp))); |
| g_print (" -------------------------\n" |
| " 3GPP | imei: '%s'\n" |
| " | enabled locks: '%s'\n" |
| " | operator id: '%s'\n" |
| " | operator name: '%s'\n" |
| " | registration: '%s'\n", |
| VALIDATE_UNKNOWN (mm_modem_3gpp_get_imei (ctx->modem_3gpp)), |
| facility_locks, |
| VALIDATE_UNKNOWN (mm_modem_3gpp_get_operator_code (ctx->modem_3gpp)), |
| VALIDATE_UNKNOWN (mm_modem_3gpp_get_operator_name (ctx->modem_3gpp)), |
| mm_modem_3gpp_registration_state_get_string ( |
| mm_modem_3gpp_get_registration_state ((ctx->modem_3gpp)))); |
| |
| g_free (facility_locks); |
| } |
| |
| /* If available, CDMA related stuff */ |
| if (ctx->modem_cdma) { |
| guint sid; |
| guint nid; |
| gchar *sid_str; |
| gchar *nid_str; |
| |
| sid = mm_modem_cdma_get_sid (ctx->modem_cdma); |
| sid_str = (sid != MM_MODEM_CDMA_SID_UNKNOWN ? |
| g_strdup_printf ("%u", sid) : |
| NULL); |
| nid = mm_modem_cdma_get_nid (ctx->modem_cdma); |
| nid_str = (nid != MM_MODEM_CDMA_NID_UNKNOWN ? |
| g_strdup_printf ("%u", nid) : |
| NULL); |
| |
| g_print (" -------------------------\n" |
| " CDMA | meid: '%s'\n" |
| " | esn: '%s'\n" |
| " | sid: '%s'\n" |
| " | nid: '%s'\n" |
| " | registration: CDMA1x '%s'\n" |
| " | EV-DO '%s'\n", |
| VALIDATE_UNKNOWN (mm_modem_cdma_get_meid (ctx->modem_cdma)), |
| VALIDATE_UNKNOWN (mm_modem_cdma_get_esn (ctx->modem_cdma)), |
| VALIDATE_UNKNOWN (sid_str), |
| VALIDATE_UNKNOWN (nid_str), |
| mm_modem_cdma_registration_state_get_string ( |
| mm_modem_cdma_get_cdma1x_registration_state ((ctx->modem_cdma))), |
| mm_modem_cdma_registration_state_get_string ( |
| mm_modem_cdma_get_evdo_registration_state ((ctx->modem_cdma)))); |
| |
| g_free (sid_str); |
| g_free (nid_str); |
| } |
| |
| /* SIM */ |
| g_print (" -------------------------\n" |
| " SIM | path: '%s'\n", |
| VALIDATE_PATH (mm_modem_get_sim_path (ctx->modem))); |
| g_print ("\n"); |
| |
| g_free (bands_string); |
| g_free (supported_bands_string); |
| g_free (access_technologies_string); |
| g_free (capabilities_string); |
| g_free (prefixed_revision); |
| g_free (allowed_modes_string); |
| g_free (preferred_mode_string); |
| g_free (supported_modes_string); |
| g_free (unlock_retries_string); |
| g_free (own_numbers_string); |
| } |
| |
| static void |
| enable_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't enable the modem: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully enabled the modem\n"); |
| } |
| |
| static void |
| enable_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_enable_finish (modem, result, &error); |
| enable_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| disable_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't disable the modem: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully disabled the modem\n"); |
| } |
| |
| static void |
| disable_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_disable_finish (modem, result, &error); |
| disable_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| reset_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't reset the modem: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully reseted the modem\n"); |
| } |
| |
| static void |
| reset_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_reset_finish (modem, result, &error); |
| reset_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| factory_reset_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't reset the modem to factory state: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully reseted the modem to factory state\n"); |
| } |
| |
| static void |
| factory_reset_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_factory_reset_finish (modem, result, &error); |
| factory_reset_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| |
| static void |
| command_process_reply (gchar *result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: command failed: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("response: '%s'\n", result); |
| g_free (result); |
| } |
| |
| static void |
| command_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gchar * operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_command_finish (modem, result, &error); |
| command_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| list_bearers_process_reply (GList *result, |
| const GError *error) |
| { |
| if (error) { |
| g_printerr ("error: couldn't list bearers: '%s'\n", |
| error->message); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("\n"); |
| if (!result) { |
| g_print ("No bearers were found\n"); |
| } else { |
| GList *l; |
| |
| g_print ("Found %u bearers:\n", g_list_length (result)); |
| for (l = result; l; l = g_list_next (l)) { |
| MMBearer *bearer = MM_BEARER (l->data); |
| |
| g_print ("\n"); |
| print_bearer_short_info (bearer); |
| g_object_unref (bearer); |
| } |
| g_list_free (result); |
| } |
| } |
| |
| static void |
| list_bearers_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| GList *operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_list_bearers_finish (modem, result, &error); |
| list_bearers_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| create_bearer_process_reply (MMBearer *bearer, |
| const GError *error) |
| { |
| if (!bearer) { |
| g_printerr ("error: couldn't create new bearer: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("Successfully created new bearer in modem:\n"); |
| print_bearer_short_info (bearer); |
| g_object_unref (bearer); |
| } |
| |
| static void |
| create_bearer_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| MMBearer *bearer; |
| GError *error = NULL; |
| |
| bearer = mm_modem_create_bearer_finish (modem, result, &error); |
| create_bearer_process_reply (bearer, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| delete_bearer_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't delete bearer: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully deleted bearer from modem\n"); |
| } |
| |
| static void |
| delete_bearer_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_delete_bearer_finish (modem, result, &error); |
| delete_bearer_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| set_allowed_modes_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't set allowed modes: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully set allowed modes in the modem\n"); |
| } |
| |
| static void |
| set_allowed_modes_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_set_allowed_modes_finish (modem, result, &error); |
| set_allowed_modes_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| parse_modes (MMModemMode *allowed, |
| MMModemMode *preferred) |
| { |
| GError *error = NULL; |
| |
| *allowed = mm_common_get_modes_from_string (set_allowed_modes_str, &error); |
| if (error) { |
| g_printerr ("error: couldn't parse list of allowed modes: '%s'\n", |
| error->message); |
| exit (EXIT_FAILURE); |
| } |
| |
| *preferred = (set_preferred_mode_str ? |
| mm_common_get_modes_from_string (set_preferred_mode_str, &error) : |
| MM_MODEM_MODE_NONE); |
| if (error) { |
| g_printerr ("error: couldn't parse preferred mode: '%s'\n", |
| error->message); |
| exit (EXIT_FAILURE); |
| } |
| } |
| |
| static void |
| set_bands_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't set bands: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully set bands in the modem\n"); |
| } |
| |
| static void |
| set_bands_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_set_bands_finish (modem, result, &error); |
| set_bands_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| parse_bands (MMModemBand **bands, |
| guint *n_bands) |
| { |
| GError *error = NULL; |
| |
| mm_common_get_bands_from_string (set_bands_str, |
| bands, |
| n_bands, |
| &error); |
| if (error) { |
| g_printerr ("error: couldn't parse list of bands: '%s'\n", |
| error->message); |
| exit (EXIT_FAILURE); |
| } |
| } |
| |
| |
| static void |
| state_changed (MMModem *modem, |
| MMModemState old_state, |
| MMModemState new_state, |
| MMModemStateChangeReason reason) |
| { |
| g_print ("\t%s: State changed, '%s' --> '%s' (Reason: %s)\n", |
| mm_modem_get_path (modem), |
| mm_modem_state_get_string (old_state), |
| mm_modem_state_get_string (new_state), |
| mmcli_get_state_reason_string (reason)); |
| fflush (stdout); |
| } |
| |
| static void |
| get_modem_ready (GObject *source, |
| GAsyncResult *result, |
| gpointer none) |
| { |
| ctx->object = mmcli_get_modem_finish (result, &ctx->manager); |
| ctx->modem = mm_object_get_modem (ctx->object); |
| ctx->modem_3gpp = mm_object_get_modem_3gpp (ctx->object); |
| ctx->modem_cdma = mm_object_get_modem_cdma (ctx->object); |
| |
| if (info_flag) |
| g_assert_not_reached (); |
| |
| /* Request to monitor modems? */ |
| if (monitor_state_flag) { |
| MMModemState current; |
| |
| g_signal_connect (ctx->modem, |
| "state-changed", |
| G_CALLBACK (state_changed), |
| NULL); |
| |
| current = mm_modem_get_state (ctx->modem); |
| g_print ("\t%s: Initial state, '%s'\n", |
| mm_object_get_path (ctx->object), |
| mm_modem_state_get_string (current)); |
| |
| /* If we get cancelled, operation done */ |
| g_cancellable_connect (ctx->cancellable, |
| G_CALLBACK (cancelled), |
| NULL, |
| NULL); |
| return; |
| } |
| |
| /* Request to enable the modem? */ |
| if (enable_flag) { |
| g_debug ("Asynchronously enabling modem..."); |
| mm_modem_enable (ctx->modem, |
| ctx->cancellable, |
| (GAsyncReadyCallback)enable_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to disable the modem? */ |
| if (disable_flag) { |
| g_debug ("Asynchronously disabling modem..."); |
| mm_modem_disable (ctx->modem, |
| ctx->cancellable, |
| (GAsyncReadyCallback)disable_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to reset the modem? */ |
| if (reset_flag) { |
| g_debug ("Asynchronously reseting modem..."); |
| mm_modem_reset (ctx->modem, |
| ctx->cancellable, |
| (GAsyncReadyCallback)reset_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to reset the modem to factory state? */ |
| if (factory_reset_str) { |
| g_debug ("Asynchronously factory-reseting modem..."); |
| mm_modem_factory_reset (ctx->modem, |
| factory_reset_str, |
| ctx->cancellable, |
| (GAsyncReadyCallback)factory_reset_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to send a command to the modem? */ |
| if (command_str) { |
| g_debug ("Asynchronously sending a command to the modem..."); |
| mm_modem_command (ctx->modem, |
| command_str, |
| command_timeout ? command_timeout : 30, |
| ctx->cancellable, |
| (GAsyncReadyCallback)command_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to list bearers? */ |
| if (list_bearers_flag) { |
| g_debug ("Asynchronously listing bearers in modem..."); |
| mm_modem_list_bearers (ctx->modem, |
| ctx->cancellable, |
| (GAsyncReadyCallback)list_bearers_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to create a new bearer? */ |
| if (create_bearer_str) { |
| GError *error = NULL; |
| MMBearerProperties *properties; |
| |
| properties = mm_bearer_properties_new_from_string (create_bearer_str, &error); |
| if (!properties) { |
| g_printerr ("Error parsing properties string: '%s'\n", error->message); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_debug ("Asynchronously creating new bearer in modem..."); |
| mm_modem_create_bearer (ctx->modem, |
| properties, |
| ctx->cancellable, |
| (GAsyncReadyCallback)create_bearer_ready, |
| NULL); |
| g_object_unref (properties); |
| return; |
| } |
| |
| /* Request to delete a given bearer? */ |
| if (delete_bearer_str) { |
| mm_modem_delete_bearer (ctx->modem, |
| delete_bearer_str, |
| ctx->cancellable, |
| (GAsyncReadyCallback)delete_bearer_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to set allowed modes in a given modem? */ |
| if (set_allowed_modes_str) { |
| MMModemMode allowed; |
| MMModemMode preferred; |
| |
| parse_modes (&allowed, &preferred); |
| mm_modem_set_allowed_modes (ctx->modem, |
| allowed, |
| preferred, |
| ctx->cancellable, |
| (GAsyncReadyCallback)set_allowed_modes_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to set allowed bands in a given modem? */ |
| if (set_bands_str) { |
| MMModemBand *bands; |
| guint n_bands; |
| |
| parse_bands (&bands, &n_bands); |
| mm_modem_set_bands (ctx->modem, |
| bands, |
| n_bands, |
| ctx->cancellable, |
| (GAsyncReadyCallback)set_bands_ready, |
| NULL); |
| g_free (bands); |
| return; |
| } |
| |
| g_warn_if_reached (); |
| } |
| |
| void |
| mmcli_modem_run_asynchronous (GDBusConnection *connection, |
| GCancellable *cancellable) |
| { |
| /* Initialize context */ |
| ctx = g_new0 (Context, 1); |
| if (cancellable) |
| ctx->cancellable = g_object_ref (cancellable); |
| |
| /* Get proper modem */ |
| mmcli_get_modem (connection, |
| mmcli_get_common_modem_string (), |
| cancellable, |
| (GAsyncReadyCallback)get_modem_ready, |
| NULL); |
| } |
| |
| void |
| mmcli_modem_run_synchronous (GDBusConnection *connection) |
| { |
| GError *error = NULL; |
| |
| if (monitor_state_flag) |
| g_assert_not_reached (); |
| |
| /* Initialize context */ |
| ctx = g_new0 (Context, 1); |
| ctx->object = mmcli_get_modem_sync (connection, |
| mmcli_get_common_modem_string (), |
| &ctx->manager); |
| ctx->modem = mm_object_get_modem (ctx->object); |
| ctx->modem_3gpp = mm_object_get_modem_3gpp (ctx->object); |
| |
| /* Request to get info from modem? */ |
| if (info_flag) { |
| g_debug ("Printing modem info..."); |
| print_modem_info (); |
| return; |
| } |
| |
| /* Request to enable the modem? */ |
| if (enable_flag) { |
| gboolean result; |
| |
| g_debug ("Synchronously enabling modem..."); |
| result = mm_modem_enable_sync (ctx->modem, NULL, &error); |
| enable_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to disable the modem? */ |
| if (disable_flag) { |
| gboolean result; |
| |
| g_debug ("Synchronously disabling modem..."); |
| result = mm_modem_disable_sync (ctx->modem, NULL, &error); |
| disable_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to reset the modem? */ |
| if (reset_flag) { |
| gboolean result; |
| |
| g_debug ("Synchronously reseting modem..."); |
| result = mm_modem_reset_sync (ctx->modem, NULL, &error); |
| reset_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to reset the modem to factory state? */ |
| if (factory_reset_str) { |
| gboolean result; |
| |
| g_debug ("Synchronously factory-reseting modem..."); |
| result = mm_modem_factory_reset_sync (ctx->modem, |
| factory_reset_str, |
| NULL, |
| &error); |
| factory_reset_process_reply (result, error); |
| return; |
| } |
| |
| |
| /* Request to send a command to the modem? */ |
| if (command_str) { |
| gchar *result; |
| |
| g_debug ("Synchronously sending command to modem..."); |
| result = mm_modem_command_sync (ctx->modem, |
| command_str, |
| command_timeout ? command_timeout : 30, |
| NULL, |
| &error); |
| command_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to list the bearers? */ |
| if (list_bearers_flag) { |
| GList *result; |
| |
| g_debug ("Synchronously listing bearers..."); |
| result = mm_modem_list_bearers_sync (ctx->modem, NULL, &error); |
| list_bearers_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to create a new bearer? */ |
| if (create_bearer_str) { |
| MMBearer *bearer; |
| GError *error = NULL; |
| MMBearerProperties *properties; |
| |
| properties = mm_bearer_properties_new_from_string (create_bearer_str, &error); |
| if (!properties) { |
| g_printerr ("Error parsing properties string: '%s'\n", error->message); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_debug ("Synchronously creating new bearer in modem..."); |
| bearer = mm_modem_create_bearer_sync (ctx->modem, |
| properties, |
| NULL, |
| &error); |
| g_object_unref (properties); |
| |
| create_bearer_process_reply (bearer, error); |
| return; |
| } |
| |
| /* Request to delete a given bearer? */ |
| if (delete_bearer_str) { |
| gboolean result; |
| |
| result = mm_modem_delete_bearer_sync (ctx->modem, |
| delete_bearer_str, |
| NULL, |
| &error); |
| |
| delete_bearer_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to set allowed modes in a given modem? */ |
| if (set_allowed_modes_str) { |
| MMModemMode allowed; |
| MMModemMode preferred; |
| gboolean result; |
| |
| parse_modes (&allowed, &preferred); |
| result = mm_modem_set_allowed_modes_sync (ctx->modem, |
| allowed, |
| preferred, |
| NULL, |
| &error); |
| |
| set_allowed_modes_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to set allowed bands in a given modem? */ |
| if (set_bands_str) { |
| gboolean result; |
| MMModemBand *bands; |
| guint n_bands; |
| |
| parse_bands (&bands, &n_bands); |
| result = mm_modem_set_bands_sync (ctx->modem, |
| bands, |
| n_bands, |
| NULL, |
| &error); |
| g_free (bands); |
| set_bands_process_reply (result, error); |
| return; |
| } |
| |
| g_warn_if_reached (); |
| } |
