| /* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ |
| /* |
| * libmm -- Access modem status & information from glib applications |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, write to the |
| * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, |
| * Boston, MA 02110-1301 USA. |
| * |
| * Copyright (C) 2011 Aleksander Morgado <aleksander@gnu.org> |
| */ |
| |
| #include <gio/gio.h> |
| |
| #include <mm-common-helpers.h> |
| |
| #include "mm-helpers.h" |
| #include "mm-modem.h" |
| |
| /** |
| * mm_modem_get_path: |
| * @self: A #MMModem. |
| * |
| * Gets the DBus path of the #MMObject which implements this interface. |
| * |
| * Returns: (transfer none): The DBus path of the #MMObject object. |
| */ |
| const gchar * |
| mm_modem_get_path (MMModem *self) |
| { |
| g_return_val_if_fail (G_IS_DBUS_PROXY (self), NULL); |
| |
| RETURN_NON_EMPTY_CONSTANT_STRING ( |
| g_dbus_proxy_get_object_path (G_DBUS_PROXY (self))); |
| } |
| |
| /** |
| * mm_modem_dup_path: |
| * @self: A #MMModem. |
| * |
| * Gets a copy of the DBus path of the #MMObject object which implements this interface. |
| * |
| * Returns: (transfer full): The DBus path of the #MMObject. The returned value should be freed with g_free(). |
| */ |
| gchar * |
| mm_modem_dup_path (MMModem *self) |
| { |
| gchar *value; |
| |
| g_return_val_if_fail (G_IS_DBUS_PROXY (self), NULL); |
| |
| g_object_get (G_OBJECT (self), |
| "g-object-path", &value, |
| NULL); |
| |
| RETURN_NON_EMPTY_STRING (value); |
| } |
| |
| /** |
| * mm_modem_get_sim_path: |
| * @self: A #MMModem. |
| * |
| * Gets the DBus path of the #MMSim handled in this #MMModem. |
| * |
| * <warning>It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_sim_path() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The DBus path of the #MMSim handled in this #MMModem, or %NULL if none available. |
| */ |
| const gchar * |
| mm_modem_get_sim_path (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_CONSTANT_STRING (mm_gdbus_modem_get_sim (self)); |
| } |
| |
| /** |
| * mm_modem_dup_sim_path: |
| * @self: A #MMModem. |
| * |
| * Gets a copy of the DBus path of the #MMSim handled in this #MMModem. |
| * |
| * Returns: (transfer full): The DBus path of the #MMSim handled in this #MMModem, or %NULL if none available. The returned value should be freed with g_free(). |
| */ |
| gchar * |
| mm_modem_dup_sim_path (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_STRING ( |
| mm_gdbus_modem_dup_sim (self)); |
| } |
| |
| /** |
| * mm_modem_get_modem_capabilities: |
| * @self: A #MMModem. |
| * |
| * Gets the list of generic families of access technologies supported by this #MMModem. |
| * |
| * Not all capabilities are available at the same time however; some |
| * modems require a firmware reload or other reinitialization to switch |
| * between e.g. CDMA/EVDO and GSM/UMTS. |
| * |
| * Returns: A bitmask of #MMModemCapability flags. |
| */ |
| MMModemCapability |
| mm_modem_get_modem_capabilities (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_CAPABILITY_NONE); |
| |
| return (MMModemCapability) mm_gdbus_modem_get_modem_capabilities (self); |
| } |
| |
| /** |
| * mm_modem_get_current_capabilities: |
| * @self: A #MMModem. |
| * |
| * Gets the list of generic families of access technologies supported by this #MMModem |
| * without a firmware reload or reinitialization. |
| * |
| * Returns: A bitmask of #MMModemCapability flags. |
| */ |
| MMModemCapability |
| mm_modem_get_current_capabilities (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_CAPABILITY_NONE); |
| |
| return mm_gdbus_modem_get_current_capabilities (self); |
| } |
| |
| /** |
| * mm_modem_get_max_bearers: |
| * @self: a #MMModem. |
| * |
| * Gets the maximum number of defined packet data bearers this #MMModem supports. |
| * |
| * This is not the number of active/connected bearers the modem supports, |
| * but simply the number of bearers that may be defined at any given time. |
| * For example, POTS and CDMA2000-only devices support only one bearer, |
| * while GSM/UMTS devices typically support three or more, and any |
| * LTE-capable device (whether LTE-only, GSM/UMTS-capable, and/or |
| * CDMA2000-capable) also typically support three or more. |
| * |
| * Returns: the maximum number of defined packet data bearers. |
| */ |
| guint |
| mm_modem_get_max_bearers (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), 0); |
| |
| return mm_gdbus_modem_get_max_bearers (self); |
| } |
| |
| /** |
| * mm_modem_get_max_bearers: |
| * @self: a #MMModem. |
| * |
| * Gets the maximum number of active packet data bearers this #MMModem supports. |
| * |
| * POTS and CDMA2000-only devices support one active bearer, while GSM/UMTS |
| * and LTE-capable devices (including LTE/CDMA devices) typically support |
| * at least two active bearers. |
| * |
| * Returns: the maximum number of defined packet data bearers. |
| */ |
| guint |
| mm_modem_get_max_active_bearers (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), 0); |
| |
| return mm_gdbus_modem_get_max_active_bearers (self); |
| } |
| |
| /** |
| * mm_modem_get_manufacturer: |
| * @self: A #MMModem. |
| * |
| * Gets the equipment manufacturer, as reported by this #MMModem. |
| * |
| * <warning>It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_manufacturer() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The equipment manufacturer, or %NULL if none available. |
| */ |
| const gchar * |
| mm_modem_get_manufacturer (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_CONSTANT_STRING ( |
| mm_gdbus_modem_get_manufacturer (self)); |
| } |
| |
| /** |
| * mm_modem_dup_manufacturer: |
| * @self: A #MMModem. |
| * |
| * Gets a copy of the equipment manufacturer, as reported by this #MMModem. |
| * |
| * Returns: (transfer full): The equipment manufacturer, or %NULL if none available. The returned value should be freed with g_free(). |
| */ |
| gchar * |
| mm_modem_dup_manufacturer (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_STRING ( |
| mm_gdbus_modem_dup_manufacturer (self)); |
| } |
| |
| /** |
| * mm_modem_get_model: |
| * @self: A #MMModem. |
| * |
| * Gets the equipment model, as reported by this #MMModem. |
| * |
| * <warning>It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_model() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The equipment model, or %NULL if none available. |
| */ |
| const gchar * |
| mm_modem_get_model (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_CONSTANT_STRING ( |
| mm_gdbus_modem_get_model (self)); |
| } |
| |
| /** |
| * mm_modem_dup_model: |
| * @self: A #MMModem. |
| * |
| * Gets a copy of the equipment model, as reported by this #MMModem. |
| * |
| * Returns: (transfer full): The equipment model, or %NULL if none available. The returned value should be freed with g_free(). |
| */ |
| gchar * |
| mm_modem_dup_model (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_STRING ( |
| mm_gdbus_modem_dup_model (self)); |
| } |
| |
| /** |
| * mm_modem_get_revision: |
| * @self: A #MMModem. |
| * |
| * Gets the equipment revision, as reported by this #MMModem. |
| * |
| * <warning>It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_revision() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The equipment revision, or %NULL if none available. |
| */ |
| const gchar * |
| mm_modem_get_revision (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_CONSTANT_STRING ( |
| mm_gdbus_modem_get_revision (self)); |
| } |
| |
| /** |
| * mm_modem_dup_revision: |
| * @self: A #MMModem. |
| * |
| * Gets a copy of the equipment revision, as reported by this #MMModem. |
| * |
| * Returns: (transfer full): The equipment revision, or %NULL if none available. The returned value should be freed with g_free(). |
| */ |
| gchar * |
| mm_modem_dup_revision (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_STRING ( |
| mm_gdbus_modem_dup_revision (self)); |
| } |
| |
| /** |
| * mm_modem_get_device_identifier: |
| * @self: A #MMModem. |
| * |
| * Gets a best-effort device identifier based on various device information like |
| * model name, firmware revision, USB/PCI/PCMCIA IDs, and other properties. |
| * |
| * This ID is not guaranteed to be unique and may be shared between |
| * identical devices with the same firmware, but is intended to be "unique |
| * enough" for use as a casual device identifier for various user |
| * experience operations. |
| * |
| * This is not the device's IMEI or ESN since those may not be available |
| * before unlocking the device via a PIN. |
| * |
| * <warning>It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_device_identifier() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The device identifier, or %NULL if none available. |
| */ |
| const gchar * |
| mm_modem_get_device_identifier (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_CONSTANT_STRING ( |
| mm_gdbus_modem_get_device_identifier (self)); |
| } |
| |
| /** |
| * mm_modem_dup_device_identifier: |
| * @self: A #MMModem. |
| * |
| * Gets a copy of a best-effort device identifier based on various device information |
| * like model name, firmware revision, USB/PCI/PCMCIA IDs, and other properties. |
| * |
| * This ID is not guaranteed to be unique and may be shared between |
| * identical devices with the same firmware, but is intended to be "unique |
| * enough" for use as a casual device identifier for various user |
| * experience operations. |
| * |
| * This is not the device's IMEI or ESN since those may not be available |
| * before unlocking the device via a PIN. |
| * |
| * Returns: (transfer full): The device identifier, or %NULL if none available. The returned value should be freed with g_free(). |
| */ |
| gchar * |
| mm_modem_dup_device_identifier (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_STRING ( |
| mm_gdbus_modem_dup_device_identifier (self)); |
| } |
| |
| /** |
| * mm_modem_get_device: |
| * @self: A #MMModem. |
| * |
| * Gets the physical modem device reference (ie, USB, PCI, PCMCIA device), which |
| * may be dependent upon the operating system. |
| * |
| * <warning>It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_device() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The device, or %NULL if none available. |
| */ |
| const gchar * |
| mm_modem_get_device (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_CONSTANT_STRING ( |
| mm_gdbus_modem_get_device (self)); |
| } |
| |
| /** |
| * mm_modem_dup_device: |
| * @self: A #MMModem. |
| * |
| * Gets a copy of the physical modem device reference (ie, USB, PCI, PCMCIA device), which |
| * may be dependent upon the operating system. |
| * |
| * Returns: (transfer full): The device, or %NULL if none available. The returned value should be freed with g_free(). |
| */ |
| gchar * |
| mm_modem_dup_device (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_STRING ( |
| mm_gdbus_modem_dup_device (self)); |
| } |
| |
| /** |
| * mm_modem_get_driver: |
| * @self: A #MMModem. |
| * |
| * Gets the Operating System device driver handling communication with the modem |
| * hardware. |
| * |
| * <warning>It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_driver() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The driver, or %NULL if none available. |
| */ |
| const gchar * |
| mm_modem_get_driver (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_CONSTANT_STRING ( |
| mm_gdbus_modem_get_driver (self)); |
| } |
| |
| /** |
| * mm_modem_dup_driver: |
| * @self: A #MMModem. |
| * |
| * Gets a copy of the Operating System device driver handling communication with the modem |
| * hardware. |
| * |
| * Returns: (transfer full): The driver, or %NULL if none available. The returned value should be freed with g_free(). |
| */ |
| gchar * |
| mm_modem_dup_driver (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_STRING ( |
| mm_gdbus_modem_dup_driver (self)); |
| } |
| |
| /** |
| * mm_modem_get_plugin: |
| * @self: A #MMModem. |
| * |
| * Gets the name of the plugin handling this #MMModem. |
| * |
| * <warning>It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_plugin() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The name of the plugin, or %NULL if none available. |
| */ |
| const gchar * |
| mm_modem_get_plugin (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_CONSTANT_STRING ( |
| mm_gdbus_modem_get_plugin (self)); |
| } |
| |
| /** |
| * mm_modem_dup_plugin: |
| * @self: A #MMModem. |
| * |
| * Gets a copy of the name of the plugin handling this #MMModem. |
| * |
| * Returns: (transfer full): The name of the plugin, or %NULL if none available. The returned value should be freed with g_free(). |
| */ |
| gchar * |
| mm_modem_dup_plugin (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_STRING ( |
| mm_gdbus_modem_dup_plugin (self)); |
| } |
| |
| /** |
| * mm_modem_get_equipment_identifier: |
| * @self: A #MMModem. |
| * |
| * Gets the identity of the #MMModem. |
| * |
| * This will be the IMEI number for GSM devices and the hex-format ESN/MEID |
| * for CDMA devices. |
| * |
| * <warning>It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_equipment_identifier() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The equipment identifier, or %NULL if none available. |
| */ |
| const gchar * |
| mm_modem_get_equipment_identifier (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_CONSTANT_STRING ( |
| mm_gdbus_modem_get_equipment_identifier (self)); |
| } |
| |
| /** |
| * mm_modem_dup_equipment_identifier: |
| * @self: A #MMModem. |
| * |
| * Gets a copy of the identity of the #MMModem. |
| * |
| * This will be the IMEI number for GSM devices and the hex-format ESN/MEID |
| * for CDMA devices. |
| * |
| * Returns: (transfer full): The equipment identifier, or %NULL if none available. The returned value should be freed with g_free(). |
| */ |
| gchar * |
| mm_modem_dup_equipment_identifier (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| RETURN_NON_EMPTY_STRING ( |
| mm_gdbus_modem_dup_equipment_identifier (self)); |
| } |
| |
| const gchar *const * |
| mm_modem_get_own_numbers (MMModem *self) |
| { |
| const gchar *const *own; |
| |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| own = mm_gdbus_modem_get_own_numbers (self); |
| |
| return (own && own[0] ? own : NULL); |
| } |
| |
| gchar ** |
| mm_modem_dup_own_numbers (MMModem *self) |
| { |
| gchar **own; |
| |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| own = mm_gdbus_modem_dup_own_numbers (self); |
| if (own && own[0]) |
| return own; |
| |
| g_strfreev (own); |
| return NULL; |
| } |
| |
| /** |
| * mm_modem_get_unlock_required: |
| * @self: A #MMModem. |
| * |
| * Gets current lock state of the #MMModemm. |
| * |
| * Returns: A #MMModemLock value, specifying the current lock state. |
| */ |
| MMModemLock |
| mm_modem_get_unlock_required (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_LOCK_UNKNOWN); |
| |
| return (MMModemLock) mm_gdbus_modem_get_unlock_required (self); |
| } |
| |
| /** |
| * mm_modem_get_unlock_retries: |
| * @self: A #MMModem. |
| * |
| * TODO |
| * |
| * Returns: a new reference to a #MMUnlockRetries object. |
| */ |
| MMUnlockRetries * |
| mm_modem_get_unlock_retries (MMModem *self) |
| { |
| MMUnlockRetries *unlock_retries; |
| GVariant *dictionary; |
| |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| dictionary = mm_gdbus_modem_get_unlock_retries (self); |
| unlock_retries = mm_unlock_retries_new_from_dictionary (dictionary); |
| |
| return unlock_retries; |
| } |
| |
| /** |
| * mm_modem_get_state: |
| * @self: A #MMModem. |
| * |
| * Gets the overall state of the #MMModem. |
| * |
| * Returns: A #MMModemState value. |
| */ |
| MMModemState |
| mm_modem_get_state (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_STATE_UNKNOWN); |
| |
| return (MMModemState) mm_gdbus_modem_get_state (self); |
| } |
| |
| /** |
| * mm_modem_get_access_technology: |
| * @self: A #MMModem. |
| * |
| * Gets the current network access technology used by the #MMModem to communicate |
| * with the network. |
| * |
| * Returns: A ##MMModemAccessTechnology value. |
| */ |
| MMModemAccessTechnology |
| mm_modem_get_access_technologies (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_ACCESS_TECHNOLOGY_UNKNOWN); |
| |
| return (MMModemAccessTechnology) mm_gdbus_modem_get_access_technologies (self); |
| } |
| |
| /** |
| * mm_modem_get_signal_quality: |
| * @self: A #MMModem. |
| * @recent: (out): Return location for the flag specifying if the signal quality value was recent or not. |
| * |
| * Gets the signal quality value in percent (0 - 100) of the dominant access technology |
| * the #MMModem is using to communicate with the network. |
| * |
| * Always 0 for POTS devices. |
| * |
| * Returns: The signal quality. |
| */ |
| guint |
| mm_modem_get_signal_quality (MMModem *self, |
| gboolean *recent) |
| { |
| GVariant *variant; |
| gboolean is_recent = FALSE; |
| guint quality = 0; |
| |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), 0); |
| |
| variant = mm_gdbus_modem_get_signal_quality (self); |
| if (variant) { |
| g_variant_get (variant, |
| "(ub)", |
| &quality, |
| &is_recent); |
| } |
| |
| if (recent) |
| *recent = is_recent; |
| return quality; |
| } |
| |
| /** |
| * mm_modem_get_supported_modes: |
| * @self: A #MMModem. |
| * |
| * Gets the list of modes specifying the access technologies supported by the #MMModem. |
| * |
| * For POTS devices, only #MM_MODEM_MODE_ANY will be returned. |
| * |
| * Returns: A bitmask of #MMModemMode values. |
| */ |
| MMModemMode |
| mm_modem_get_supported_modes (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_MODE_NONE); |
| |
| return (MMModemMode) mm_gdbus_modem_get_supported_modes (self); |
| } |
| |
| /** |
| * mm_modem_get_allowed_modes: |
| * @self: A #MMModem. |
| * |
| * Gets the list of modes specifying the access technologies (eg 2G/3G/4G preference) |
| * the #MMModem is currently allowed to use when connecting to a network. |
| * |
| * For POTS devices, only the #MM_MODEM_MODE_ANY is supported. |
| * |
| * Returns: A bitmask of #MMModemMode values. |
| */ |
| MMModemMode |
| mm_modem_get_allowed_modes (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_MODE_NONE); |
| |
| return (MMModemMode) mm_gdbus_modem_get_allowed_modes (self); |
| } |
| |
| /** |
| * mm_modem_get_preferred_mode: |
| * @self: A #MMModem. |
| * |
| * Get the preferred access technology (eg 2G/3G/4G preference), among |
| * the ones defined in the allowed modes. |
| * |
| * Returns: A single #MMModemMode value. |
| */ |
| MMModemMode |
| mm_modem_get_preferred_mode (MMModem *self) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_MODE_NONE); |
| |
| return (MMModemMode) mm_gdbus_modem_get_preferred_mode (self); |
| } |
| |
| /** |
| * mm_modem_get_supported_bands: |
| * @self: A #MMModem. |
| * @bands: (out): Return location for the array of #MMModemBand values. |
| * @n_bands: (out): Return location for the number of values in @bands. |
| * |
| * Gets the list of radio frequency and technology bands supported by the #MMModem. |
| * |
| * For POTS devices, only #MM_MODEM_BAND_ANY will be returned in @bands. |
| */ |
| void |
| mm_modem_get_supported_bands (MMModem *self, |
| MMModemBand **bands, |
| guint *n_bands) |
| { |
| GArray *array; |
| |
| g_return_if_fail (MM_GDBUS_IS_MODEM (self)); |
| g_return_if_fail (bands != NULL); |
| g_return_if_fail (n_bands != NULL); |
| |
| array = mm_common_bands_variant_to_garray (mm_gdbus_modem_get_supported_bands (self)); |
| *n_bands = array->len; |
| *bands = (MMModemBand *)g_array_free (array, FALSE); |
| } |
| |
| /** |
| * mm_modem_get_bands: |
| * @self: A #MMModem. |
| * @bands: (out): Return location for the array of #MMModemBand values. |
| * @n_bands: (out): Return location for the number of values in @bands. |
| * |
| * Gets the list of radio frequency and technology bands the #MMModem is currently |
| * using when connecting to a network. |
| * |
| * For POTS devices, only the #MM_MODEM_BAND_ANY band is supported. |
| */ |
| void |
| mm_modem_get_bands (MMModem *self, |
| MMModemBand **bands, |
| guint *n_bands) |
| { |
| GArray *array; |
| |
| g_return_if_fail (MM_GDBUS_IS_MODEM (self)); |
| g_return_if_fail (bands != NULL); |
| g_return_if_fail (n_bands != NULL); |
| |
| array = mm_common_bands_variant_to_garray (mm_gdbus_modem_get_bands (self)); |
| *n_bands = array->len; |
| *bands = (MMModemBand *)g_array_free (array, FALSE); |
| } |
| |
| /** |
| * mm_modem_enable: |
| * @self: A #MMModem. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously tries to enable the #MMModem. When enabled, the modem's radio is |
| * powered on and data sessions, voice calls, location services, and Short Message |
| * Service may be available. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call mm_modem_enable_finish() to get the result of the operation. |
| * |
| * See mm_modem_enable_sync() for the synchronous, blocking version of this method. |
| */ |
| void |
| mm_modem_enable (MMModem *self, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_return_if_fail (MM_GDBUS_IS_MODEM (self)); |
| |
| mm_gdbus_modem_call_enable (self, |
| TRUE, |
| cancellable, |
| callback, |
| user_data); |
| } |
| |
| /** |
| * mm_modem_enable_finish: |
| * @self: A #MMModem. |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_enable(). |
| * @error: Return location for error or %NULL. |
| * |
| * Finishes an operation started with mm_modem_enable(). |
| * |
| * Returns: (skip): %TRUE if the modem was properly enabled, %FALSE if @error is set. |
| */ |
| gboolean |
| mm_modem_enable_finish (MMModem *self, |
| GAsyncResult *res, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| return mm_gdbus_modem_call_enable_finish (self, res, error); |
| } |
| |
| /** |
| * mm_modem_enable_sync: |
| * @self: A #MMModem. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL. |
| * |
| * Synchronously tries to enable the #MMModem. When enabled, the modem's radio is |
| * powered on and data sessions, voice calls, location services, and Short Message |
| * Service may be available. |
| * |
| * The calling thread is blocked until a reply is received. See mm_modem_enable() |
| * for the asynchronous version of this method. |
| * |
| * Returns: (skip): %TRUE if the modem was properly enabled, %FALSE if @error is set. |
| */ |
| gboolean |
| mm_modem_enable_sync (MMModem *self, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| return mm_gdbus_modem_call_enable_sync (self, |
| TRUE, |
| cancellable, |
| error); |
| } |
| |
| /** |
| * mm_modem_disable: |
| * @self: A #MMModem. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously tries to disable the #MMModem. When disabled, the modem enters |
| * low-power state and no network-related operations are available. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call mm_modem_disable_finish() to get the result of the operation. |
| * |
| * See mm_modem_disable_sync() for the synchronous, blocking version of this method. |
| */ |
| void |
| mm_modem_disable (MMModem *self, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_return_if_fail (MM_GDBUS_IS_MODEM (self)); |
| |
| mm_gdbus_modem_call_enable (self, |
| FALSE, |
| cancellable, |
| callback, |
| user_data); |
| } |
| |
| /** |
| * mm_modem_disable_finish: |
| * @self: A #MMModem. |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_disable(). |
| * @error: Return location for error or %NULL. |
| * |
| * Finishes an operation started with mm_modem_disable(). |
| * |
| * Returns: (skip): %TRUE if the modem was properly disabled, %FALSE if @error is set. |
| */ |
| gboolean |
| mm_modem_disable_finish (MMModem *self, |
| GAsyncResult *res, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| return mm_gdbus_modem_call_enable_finish (self, res, error); |
| } |
| |
| /** |
| * mm_modem_disable_sync: |
| * @self: A #MMModem. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL. |
| * |
| * Synchronously tries to disable the #MMModem. When disabled, the modem enters |
| * low-power state and no network-related operations are available. |
| * |
| * The calling thread is blocked until a reply is received. See mm_modem_disable() |
| * for the asynchronous version of this method. |
| * |
| * Returns: (skip): %TRUE if the modem was properly disabled, %FALSE if @error is set. |
| */ |
| gboolean |
| mm_modem_disable_sync (MMModem *self, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| return mm_gdbus_modem_call_enable_sync (self, |
| FALSE, |
| cancellable, |
| error); |
| } |
| |
| typedef struct { |
| MMModem *self; |
| GSimpleAsyncResult *result; |
| GCancellable *cancellable; |
| gchar **bearer_paths; |
| GList *bearer_objects; |
| guint i; |
| } ListBearersContext; |
| |
| static void |
| bearer_object_list_free (GList *list) |
| { |
| g_list_free_full (list, (GDestroyNotify) g_object_unref); |
| } |
| |
| static void |
| list_bearers_context_complete_and_free (ListBearersContext *ctx) |
| { |
| g_simple_async_result_complete (ctx->result); |
| |
| g_strfreev (ctx->bearer_paths); |
| bearer_object_list_free (ctx->bearer_objects); |
| g_object_unref (ctx->result); |
| if (ctx->cancellable) |
| g_object_unref (ctx->cancellable); |
| g_object_ref (ctx->self); |
| g_slice_free (ListBearersContext, ctx); |
| } |
| |
| /** |
| * mm_modem_list_bearers_finish: |
| * @self: A #MMModem. |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_list_bearers(). |
| * @error: Return location for error or %NULL. |
| * |
| * Finishes an operation started with mm_modem_list_bearers(). |
| * |
| * Returns: (transfer-full): The list of #MMBearer objects, or %NULL if either none found or if @error is set. |
| */ |
| GList * |
| mm_modem_list_bearers_finish (MMModem *self, |
| GAsyncResult *res, |
| GError **error) |
| { |
| GList *list; |
| |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| if (g_simple_async_result_propagate_error (G_SIMPLE_ASYNC_RESULT (res), error)) |
| return NULL; |
| |
| list = g_simple_async_result_get_op_res_gpointer (G_SIMPLE_ASYNC_RESULT (res)); |
| |
| /* The list we got, including the objects within, is owned by the async result; |
| * so we'll make sure we return a new list */ |
| g_list_foreach (list, (GFunc)g_object_ref, NULL); |
| return g_list_copy (list); |
| } |
| |
| static void |
| modem_list_bearers_build_object_ready (GDBusConnection *connection, |
| GAsyncResult *res, |
| ListBearersContext *ctx) |
| { |
| MMBearer *bearer; |
| GError *error = NULL; |
| |
| bearer = mm_gdbus_bearer_proxy_new_finish (res, &error); |
| if (error) { |
| g_simple_async_result_take_error (ctx->result, error); |
| list_bearers_context_complete_and_free (ctx); |
| return; |
| } |
| |
| /* Keep the object */ |
| ctx->bearer_objects = g_list_prepend (ctx->bearer_objects, bearer); |
| |
| /* If no more bearers, just end here. */ |
| if (!ctx->bearer_paths[++ctx->i]) { |
| g_simple_async_result_set_op_res_gpointer (ctx->result, |
| ctx->bearer_objects, |
| (GDestroyNotify)bearer_object_list_free); |
| ctx->bearer_objects = NULL; |
| list_bearers_context_complete_and_free (ctx); |
| return; |
| } |
| |
| /* Keep on creating next object */ |
| mm_gdbus_bearer_proxy_new ( |
| g_dbus_proxy_get_connection ( |
| G_DBUS_PROXY (ctx->self)), |
| G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START, |
| MM_DBUS_SERVICE, |
| ctx->bearer_paths[ctx->i], |
| ctx->cancellable, |
| (GAsyncReadyCallback)modem_list_bearers_build_object_ready, |
| ctx); |
| } |
| |
| static void |
| modem_list_bearers_ready (MMModem *self, |
| GAsyncResult *res, |
| ListBearersContext *ctx) |
| { |
| GError *error = NULL; |
| |
| mm_gdbus_modem_call_list_bearers_finish (self, &ctx->bearer_paths, res, &error); |
| if (error) { |
| g_simple_async_result_take_error (ctx->result, error); |
| list_bearers_context_complete_and_free (ctx); |
| return; |
| } |
| |
| /* If no bearers, just end here. */ |
| if (!ctx->bearer_paths || !ctx->bearer_paths[0]) { |
| g_simple_async_result_set_op_res_gpointer (ctx->result, NULL, NULL); |
| list_bearers_context_complete_and_free (ctx); |
| return; |
| } |
| |
| /* Got list of paths. If at least one found, start creating objects for each */ |
| ctx->i = 0; |
| mm_gdbus_bearer_proxy_new ( |
| g_dbus_proxy_get_connection ( |
| G_DBUS_PROXY (self)), |
| G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START, |
| MM_DBUS_SERVICE, |
| ctx->bearer_paths[ctx->i], |
| ctx->cancellable, |
| (GAsyncReadyCallback)modem_list_bearers_build_object_ready, |
| ctx); |
| } |
| |
| /** |
| * mm_modem_list_bearers: |
| * @self: A #MMModem. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously lists the packet data bearers in the #MMModem. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call mm_modem_list_bearers_finish() to get the result of the operation. |
| * |
| * See mm_modem_list_bearers_sync() for the synchronous, blocking version of this method. |
| */ |
| void |
| mm_modem_list_bearers (MMModem *self, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| ListBearersContext *ctx; |
| |
| g_return_if_fail (MM_GDBUS_IS_MODEM (self)); |
| |
| ctx = g_slice_new0 (ListBearersContext); |
| ctx->self = g_object_ref (self); |
| ctx->result = g_simple_async_result_new (G_OBJECT (self), |
| callback, |
| user_data, |
| mm_modem_list_bearers); |
| if (cancellable) |
| ctx->cancellable = g_object_ref (cancellable); |
| |
| mm_gdbus_modem_call_list_bearers (self, |
| cancellable, |
| (GAsyncReadyCallback)modem_list_bearers_ready, |
| ctx); |
| } |
| |
| /** |
| * mm_modem_list_bearers_sync: |
| * @self: A #MMModem. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL. |
| * |
| * Synchronously lists the packet data bearers in the #MMModem. |
| * |
| * The calling thread is blocked until a reply is received. See mm_modem_list_bearers() |
| * for the asynchronous version of this method. |
| * |
| * Returns: (transfer-full): The list of #MMBearer objects, or %NULL if either none found or if @error is set. |
| */ |
| GList * |
| mm_modem_list_bearers_sync (MMModem *self, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GList *bearer_objects = NULL; |
| gchar **bearer_paths = NULL; |
| guint i; |
| |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| if (!mm_gdbus_modem_call_list_bearers_sync (self, |
| &bearer_paths, |
| cancellable, |
| error)) |
| return NULL; |
| |
| /* Only non-empty lists are returned */ |
| if (!bearer_paths) |
| return NULL; |
| |
| for (i = 0; bearer_paths[i]; i++) { |
| MMBearer *bearer; |
| |
| bearer = mm_gdbus_bearer_proxy_new_sync ( |
| g_dbus_proxy_get_connection ( |
| G_DBUS_PROXY (self)), |
| G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START, |
| MM_DBUS_SERVICE, |
| bearer_paths[i], |
| cancellable, |
| error); |
| |
| if (!bearer) { |
| bearer_object_list_free (bearer_objects); |
| g_strfreev (bearer_paths); |
| return NULL; |
| } |
| |
| /* Keep the object */ |
| bearer_objects = g_list_prepend (bearer_objects, bearer); |
| } |
| |
| g_strfreev (bearer_paths); |
| return bearer_objects; |
| } |
| |
| typedef struct { |
| GSimpleAsyncResult *result; |
| GCancellable *cancellable; |
| } CreateBearerContext; |
| |
| static void |
| create_bearer_context_complete_and_free (CreateBearerContext *ctx) |
| { |
| g_simple_async_result_complete (ctx->result); |
| g_object_unref (ctx->result); |
| if (ctx->cancellable) |
| g_object_unref (ctx->cancellable); |
| g_slice_free (CreateBearerContext, ctx); |
| } |
| |
| /** |
| * mm_modem_create_bearer_finish: |
| * @self: A #MMModem. |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_create_bearer(). |
| * @error: Return location for error or %NULL. |
| * |
| * Finishes an operation started with mm_modem_create_bearer(). |
| * |
| * Returns: (transfer-full): A newly created #MMBearer, or %NULL if @error is set. |
| */ |
| MMBearer * |
| mm_modem_create_bearer_finish (MMModem *self, |
| GAsyncResult *res, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| if (g_simple_async_result_propagate_error (G_SIMPLE_ASYNC_RESULT (res), error)) |
| return NULL; |
| |
| return g_object_ref (g_simple_async_result_get_op_res_gpointer (G_SIMPLE_ASYNC_RESULT (res))); |
| } |
| |
| static void |
| modem_new_bearer_ready (GDBusConnection *connection, |
| GAsyncResult *res, |
| CreateBearerContext *ctx) |
| { |
| GError *error = NULL; |
| MMBearer *bearer; |
| |
| bearer = mm_gdbus_bearer_proxy_new_finish (res, &error); |
| if (error) |
| g_simple_async_result_take_error (ctx->result, error); |
| else |
| g_simple_async_result_set_op_res_gpointer (ctx->result, |
| bearer, |
| (GDestroyNotify)g_object_unref); |
| |
| create_bearer_context_complete_and_free (ctx); |
| } |
| |
| static void |
| modem_create_bearer_ready (MMModem *self, |
| GAsyncResult *res, |
| CreateBearerContext *ctx) |
| { |
| GError *error = NULL; |
| gchar *bearer_path = NULL; |
| |
| if (!mm_gdbus_modem_call_create_bearer_finish (self, |
| &bearer_path, |
| res, |
| &error)) { |
| g_simple_async_result_take_error (ctx->result, error); |
| create_bearer_context_complete_and_free (ctx); |
| g_free (bearer_path); |
| return; |
| } |
| |
| mm_gdbus_bearer_proxy_new ( |
| g_dbus_proxy_get_connection ( |
| G_DBUS_PROXY (self)), |
| G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START, |
| MM_DBUS_SERVICE, |
| bearer_path, |
| ctx->cancellable, |
| (GAsyncReadyCallback)modem_new_bearer_ready, |
| ctx); |
| g_free (bearer_path); |
| } |
| |
| /** |
| * mm_modem_create_bearer: |
| * @self: A #MMModem. |
| * @properties: A ##MMBearerProperties object with the properties to use. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously creates a new packet data bearer in the #MMModem. |
| * |
| * This request may fail if the modem does not support additional bearers, |
| * if too many bearers are already defined, or if @properties are invalid. |
| * |
| * See <link linkend="gdbus-method-org-freedesktop-ModemManager1-Modem.CreateBearer">CreateBearer</link> to check which properties may be passed. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call mm_modem_create_bearer_finish() to get the result of the operation. |
| * |
| * See mm_modem_create_bearer_sync() for the synchronous, blocking version of this method. |
| */ |
| void |
| mm_modem_create_bearer (MMModem *self, |
| MMBearerProperties *properties, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| CreateBearerContext *ctx; |
| GVariant *dictionary; |
| |
| g_return_if_fail (MM_GDBUS_IS_MODEM (self)); |
| |
| ctx = g_slice_new0 (CreateBearerContext); |
| ctx->result = g_simple_async_result_new (G_OBJECT (self), |
| callback, |
| user_data, |
| mm_modem_create_bearer); |
| if (cancellable) |
| ctx->cancellable = g_object_ref (cancellable); |
| |
| dictionary = mm_bearer_properties_get_dictionary (properties); |
| mm_gdbus_modem_call_create_bearer ( |
| self, |
| dictionary, |
| cancellable, |
| (GAsyncReadyCallback)modem_create_bearer_ready, |
| ctx); |
| |
| g_variant_unref (dictionary); |
| } |
| |
| /** |
| * mm_modem_create_bearer_sync: |
| * @self: A #MMModem. |
| * @properties: A ##MMBearerProperties object with the properties to use. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL. |
| * |
| * Synchronously creates a new packet data bearer in the #MMModem. |
| * |
| * This request may fail if the modem does not support additional bearers, |
| * if too many bearers are already defined, or if @properties are invalid. |
| * |
| * See <link linkend="gdbus-method-org-freedesktop-ModemManager1-Modem.CreateBearer">CreateBearer</link> to check which properties may be passed. |
| * |
| * The calling thread is blocked until a reply is received. See mm_modem_create_bearer() |
| * for the asynchronous version of this method. |
| * |
| * Returns: (transfer-full): A newly created #MMBearer, or %NULL if @error is set. |
| */ |
| MMBearer * |
| mm_modem_create_bearer_sync (MMModem *self, |
| MMBearerProperties *properties, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| MMBearer *bearer = NULL; |
| gchar *bearer_path = NULL; |
| GVariant *dictionary; |
| |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| dictionary = mm_bearer_properties_get_dictionary (properties); |
| mm_gdbus_modem_call_create_bearer_sync (self, |
| dictionary, |
| &bearer_path, |
| cancellable, |
| error); |
| if (bearer_path) { |
| bearer = mm_gdbus_bearer_proxy_new_sync ( |
| g_dbus_proxy_get_connection ( |
| G_DBUS_PROXY (self)), |
| G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START, |
| MM_DBUS_SERVICE, |
| bearer_path, |
| cancellable, |
| error); |
| g_free (bearer_path); |
| } |
| |
| g_variant_unref (dictionary); |
| |
| return bearer; |
| } |
| |
| /** |
| * mm_modem_delete_bearer: |
| * @self: A #MMModem. |
| * @bearer: Path of the bearer to delete. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously deletes a given bearer from the #MMModem. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call mm_modem_delete_bearer_finish() to get the result of the operation. |
| * |
| * See mm_modem_delete_bearer_sync() for the synchronous, blocking version of this method. |
| */ |
| void |
| mm_modem_delete_bearer (MMModem *self, |
| const gchar *bearer, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_return_if_fail (MM_GDBUS_IS_MODEM (self)); |
| |
| mm_gdbus_modem_call_delete_bearer (self, |
| bearer, |
| cancellable, |
| callback, |
| user_data); |
| } |
| |
| /** |
| * mm_modem_delete_bearer_finish: |
| * @self: A #MMModem. |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_delete_bearer(). |
| * @error: Return location for error or %NULL. |
| * |
| * Finishes an operation started with mm_modem_delete_bearer(). |
| * |
| * Returns: (skip): %TRUE if the bearer was deleted, %FALSE if @error is set. |
| */ |
| gboolean |
| mm_modem_delete_bearer_finish (MMModem *self, |
| GAsyncResult *res, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| return mm_gdbus_modem_call_delete_bearer_finish (self, |
| res, |
| error); |
| } |
| |
| /** |
| * mm_modem_delete_bearer_sync: |
| * @self: A #MMModem. |
| * @bearer: Path of the bearer to delete. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL. |
| |
| * Synchronously deletes a given bearer from the #MMModem. |
| * |
| * The calling thread is blocked until a reply is received. See mm_modem_delete_bearer() |
| * for the asynchronous version of this method. |
| * |
| * Returns: (skip): %TRUE if the bearer was deleted, %FALSE if @error is set. |
| */ |
| gboolean |
| mm_modem_delete_bearer_sync (MMModem *self, |
| const gchar *bearer, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| return mm_gdbus_modem_call_delete_bearer_sync (self, |
| bearer, |
| cancellable, |
| error); |
| } |
| |
| void |
| mm_modem_reset (MMModem *self, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_return_if_fail (MM_GDBUS_IS_MODEM (self)); |
| |
| mm_gdbus_modem_call_reset (self, |
| cancellable, |
| callback, |
| user_data); |
| } |
| |
| gboolean |
| mm_modem_reset_finish (MMModem *self, |
| GAsyncResult *res, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| return mm_gdbus_modem_call_reset_finish (self, |
| res, |
| error); |
| } |
| |
| gboolean |
| mm_modem_reset_sync (MMModem *self, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| return mm_gdbus_modem_call_reset_sync (self, |
| cancellable, |
| error); |
| } |
| |
| void |
| mm_modem_factory_reset (MMModem *self, |
| const gchar *code, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_return_if_fail (MM_GDBUS_IS_MODEM (self)); |
| |
| mm_gdbus_modem_call_factory_reset (self, |
| code, |
| cancellable, |
| callback, |
| user_data); |
| } |
| |
| gboolean |
| mm_modem_factory_reset_finish (MMModem *self, |
| GAsyncResult *res, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| return mm_gdbus_modem_call_factory_reset_finish (self, |
| res, |
| error); |
| } |
| |
| gboolean |
| mm_modem_factory_reset_sync (MMModem *self, |
| const gchar *code, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| return mm_gdbus_modem_call_factory_reset_sync (self, |
| code, |
| cancellable, |
| error); |
| } |
| |
| |
| void |
| mm_modem_command (MMModem *self, |
| const gchar *cmd, |
| guint timeout, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| gint old_timeout; |
| |
| g_return_if_fail (MM_GDBUS_IS_MODEM (self)); |
| |
| old_timeout = g_dbus_proxy_get_default_timeout (G_DBUS_PROXY (self)); |
| g_dbus_proxy_set_default_timeout (G_DBUS_PROXY (self), (timeout + 1) * 1000); |
| mm_gdbus_modem_call_command (self, |
| cmd, |
| timeout, |
| cancellable, |
| callback, |
| user_data); |
| g_dbus_proxy_set_default_timeout (G_DBUS_PROXY (self), old_timeout); |
| } |
| |
| gchar * |
| mm_modem_command_finish (MMModem *self, |
| GAsyncResult *res, |
| GError **error) |
| { |
| gchar *result; |
| |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| if (!mm_gdbus_modem_call_command_finish (self, |
| &result, |
| res, |
| error)) |
| return NULL; |
| |
| return result; |
| } |
| |
| gchar * |
| mm_modem_command_sync (MMModem *self, |
| const gchar *cmd, |
| guint timeout, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| gchar *result; |
| gboolean success; |
| gint old_timeout; |
| |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| old_timeout = g_dbus_proxy_get_default_timeout (G_DBUS_PROXY (self)); |
| g_dbus_proxy_set_default_timeout (G_DBUS_PROXY (self), (timeout + 1) * 1000); |
| success = mm_gdbus_modem_call_command_sync (self, |
| cmd, |
| timeout, |
| &result, |
| cancellable, |
| error); |
| g_dbus_proxy_set_default_timeout (G_DBUS_PROXY (self), old_timeout); |
| |
| if (!success) |
| return NULL; |
| |
| return result; |
| } |
| |
| gboolean |
| mm_modem_set_allowed_modes_finish (MMModem *self, |
| GAsyncResult *res, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| return mm_gdbus_modem_call_set_allowed_modes_finish (self, |
| res, |
| error); |
| } |
| |
| void |
| mm_modem_set_allowed_modes (MMModem *self, |
| MMModemMode modes, |
| MMModemMode preferred, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_return_if_fail (MM_GDBUS_IS_MODEM (self)); |
| |
| mm_gdbus_modem_call_set_allowed_modes (self, |
| modes, |
| preferred, |
| cancellable, |
| callback, |
| user_data); |
| } |
| |
| gboolean |
| mm_modem_set_allowed_modes_sync (MMModem *self, |
| MMModemMode modes, |
| MMModemMode preferred, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| return mm_gdbus_modem_call_set_allowed_modes_sync (self, |
| modes, |
| preferred, |
| cancellable, |
| error); |
| } |
| |
| gboolean |
| mm_modem_set_bands_finish (MMModem *self, |
| GAsyncResult *res, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| return mm_gdbus_modem_call_set_bands_finish (self, |
| res, |
| error); |
| } |
| |
| void |
| mm_modem_set_bands (MMModem *self, |
| const MMModemBand *bands, |
| guint n_bands, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_return_if_fail (MM_GDBUS_IS_MODEM (self)); |
| |
| mm_gdbus_modem_call_set_bands (self, |
| mm_common_bands_array_to_variant (bands, n_bands), |
| cancellable, |
| callback, |
| user_data); |
| } |
| |
| gboolean |
| mm_modem_set_bands_sync (MMModem *self, |
| const MMModemBand *bands, |
| guint n_bands, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); |
| |
| return (mm_gdbus_modem_call_set_bands_sync ( |
| self, |
| mm_common_bands_array_to_variant (bands, n_bands), |
| cancellable, |
| error)); |
| } |
| |
| static void |
| modem_get_sim_ready (GDBusConnection *connection, |
| GAsyncResult *res, |
| GSimpleAsyncResult *simple) |
| { |
| GError *error = NULL; |
| MMSim *sim; |
| |
| sim = mm_gdbus_sim_proxy_new_finish (res, &error); |
| if (error) |
| g_simple_async_result_take_error (simple, error); |
| else |
| g_simple_async_result_set_op_res_gpointer (simple, |
| sim, |
| (GDestroyNotify)g_object_unref); |
| |
| g_simple_async_result_complete (simple); |
| g_object_unref (simple); |
| } |
| |
| void |
| mm_modem_get_sim (MMModem *self, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| GSimpleAsyncResult *result; |
| const gchar *sim_path; |
| |
| g_return_if_fail (MM_GDBUS_IS_MODEM (self)); |
| |
| result = g_simple_async_result_new (G_OBJECT (self), |
| callback, |
| user_data, |
| mm_modem_get_sim); |
| |
| sim_path = mm_modem_get_sim_path (self); |
| if (!sim_path) { |
| g_simple_async_result_set_op_res_gpointer (result, NULL, NULL); |
| g_simple_async_result_complete_in_idle (result); |
| g_object_unref (result); |
| return; |
| } |
| |
| mm_gdbus_sim_proxy_new ( |
| g_dbus_proxy_get_connection ( |
| G_DBUS_PROXY (self)), |
| G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START, |
| MM_DBUS_SERVICE, |
| sim_path, |
| cancellable, |
| (GAsyncReadyCallback)modem_get_sim_ready, |
| result); |
| } |
| |
| MMSim * |
| mm_modem_get_sim_finish (MMModem *self, |
| GAsyncResult *res, |
| GError **error) |
| { |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| if (g_simple_async_result_propagate_error (G_SIMPLE_ASYNC_RESULT (res), error)) |
| return NULL; |
| |
| return g_object_ref (g_simple_async_result_get_op_res_gpointer (G_SIMPLE_ASYNC_RESULT (res))); |
| } |
| |
| MMSim * |
| mm_modem_get_sim_sync (MMModem *self, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| const gchar *sim_path; |
| |
| g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); |
| |
| sim_path = mm_modem_get_sim_path (self); |
| if (!sim_path) |
| return NULL; |
| |
| return (mm_gdbus_sim_proxy_new_sync ( |
| g_dbus_proxy_get_connection ( |
| G_DBUS_PROXY (self)), |
| G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START, |
| MM_DBUS_SERVICE, |
| sim_path, |
| cancellable, |
| error)); |
| } |
