introspection/org.freedesktop.ModemManager1.Modem.Modem3gpp.xml - chromiumos/third_party/modemmanager-next - Git at Google

 <?xml version="1.0" encoding="UTF-8" ?>

 <!--
  ModemManager 1.0 Interface Specification

    Copyright (C) 2008 Novell, Inc.
    Copyright (C) 2008-2013 Red Hat, Inc.
    Copyright (C) 2011-2013 Google, Inc.
    Copyright (C) 2011-2013 Lanedo GmbH
 -->

 <node name="/" xmlns:doc="http://www.freedesktop.org/dbus/1.0/doc.dtd">

   <!--
       org.freedesktop.ModemManager1.Modem.Modem3gpp:
       @short_description: The ModemManager 3GPP interface.

       This interface provides access to specific actions that may be performed
       in modems with 3GPP capabilities.

       This interface will only be available once the modem is ready to be
       registered in the cellular network. 3GPP devices will require a valid
       unlocked SIM card before any of the features in the interface can be
       used.
   -->
   <interface name="org.freedesktop.ModemManager1.Modem.Modem3gpp">

     <!--
         Register:
         @operator_id: The operator ID (ie, <literal>"MCCMNC"</literal>, like <literal>"310260"</literal>) to register. An empty string can be used to register to the home network.

         Request registration with a given mobile network.

         Since: 1.0
     -->
     <method name="Register">
       <arg name="operator_id" type="s" direction="in" />
     </method>

     <!--
         Scan:
         @results: Array of dictionaries with the found networks.

         Scan for available networks.

         @results is an array of dictionaries with each array element describing
         a mobile network found in the scan. Each dictionary may include one or
         more of the following keys:
         <variablelist>
           <varlistentry><term><literal>"status"</literal></term>
             <listitem>
               A <link linkend="MMModem3gppNetworkAvailability">MMModem3gppNetworkAvailability</link>
               value representing network availability status, given as an
               unsigned integer (signature <literal>"u"</literal>). This key will
               always be present.
             </listitem>
           </varlistentry>
           <varlistentry><term><literal>"operator-long"</literal></term>
             <listitem>
               Long-format name of operator, given as a string value (signature
               <literal>"s"</literal>). If the name is unknown, this field
               should not be present.
             </listitem>
           </varlistentry>
           <varlistentry><term><literal>"operator-short"</literal></term>
             <listitem>
               Short-format name of operator, given as a string value (signature
               <literal>"s"</literal>). If the name is unknown, this field
               should not be present.
             </listitem>
           </varlistentry>
           <varlistentry><term><literal>"operator-code"</literal></term>
             <listitem>
               Mobile code of the operator, given as a string value (signature
               <literal>"s"</literal>). Returned in the format
               <literal>"MCCMNC"</literal>, where <literal>MCC</literal> is the
               three-digit ITU E.212 Mobile Country Code and <literal>MNC</literal>
               is the two- or three-digit GSM Mobile Network Code. e.g.
               <literal>"31026"</literal> or <literal>"310260"</literal>.
             </listitem>
           </varlistentry>
           <varlistentry><term><literal>"access-technology"</literal></term>
             <listitem>
               A <link linkend="MMModemAccessTechnology">MMModemAccessTechnology</link> value
               representing the generic access technology used by this mobile network,
               given as an unsigned integer (signature <literal>"u"</literal>).
             </listitem>
           </varlistentry>
         </variablelist>

         Since: 1.0
     -->
     <method name="Scan">
       <arg name="results" type="aa{sv}" direction="out" />
     </method>

     <!--
         SetEpsUeModeOperation:
         @mode: a <link linkend="MMModem3gppEpsUeModeOperation">MMModem3gppEpsUeModeOperation</link>.

         Sets the UE mode of operation for EPS.

         Since: 1.10
     -->
     <method name="SetEpsUeModeOperation">
       <arg name="mode" type="u" direction="in" />
     </method>

     <!--
         SetInitialEpsBearerSettings:
         @settings: List of properties to use when requesting the LTE attach procedure.

         Updates the default settings to be used in the initial default EPS bearer when registering to the LTE network.

         The allowed properties in this method are all the 3GPP-specific ones specified
         in the <link linkend="gdbus-property-org-freedesktop-ModemManager1-Bearer.Properties">bearer properties</link>;
         i.e.: <literal>"apn"</literal>, <literal>"ip-type"</literal>,
         <literal>"allowed-auth"</literal>, <literal>"user"</literal>, and
         <literal>"password"</literal>.

         Since: 1.10
     -->
     <method name="SetInitialEpsBearerSettings">
       <arg name="settings" type="a{sv}" direction="in" />
     </method>

     <!--
         SetNr5gRegistrationSettings:
         @properties: List of 5G specific registration settings.

         Updates the 5G specific registration settings configured in the device.

         The allowed properties in this method are all the ones specified in the
         <link linkend="gdbus-property-org-freedesktop-ModemManager1-Modem-Modem3gpp.Nr5gRegistrationSettings">Nr5gRegistrationSettings</link>;
         i.e.: <literal>"mico-mode"</literal> and <literal>"drx-cycle"</literal>.

         Since: 1.20
     -->
     <method name="SetNr5gRegistrationSettings">
       <arg name="properties" type="a{sv}" direction="in" />
     </method>

     <!--
         Imei:

         The <ulink url="http://en.wikipedia.org/wiki/Imei">IMEI</ulink> of the device.

         Since: 1.0
     -->
     <property name="Imei" type="s" access="read" />

     <!--
         RegistrationState:

         A <link linkend="MMModem3gppRegistrationState">MMModem3gppRegistrationState</link>
         value specifying the mobile registration status as defined in 3GPP TS 27.007
         section 10.1.19.

         Since: 1.0
     -->
     <property name="RegistrationState" type="u" access="read" />

     <!--
         NetworkRejection:

         This property holds the latest network rejection information received from the
         network during registration failure, and it will be cleared whenever the modem
         successfully registers.
         Network errors are defined in 3GPP TS 24.008 in sections 10.5.3.6 and
         10.5.5.14 (detailed in annex G) and in 3GPP TS 24.301 in section 9.9.3.9.

         Mandatory items include:
         <variablelist>
           <varlistentry><term><literal>"error"</literal></term>
             <listitem>
               A <link linkend="MMNetworkError">MMNetworkError</link>,
               specifying the reason why a request from the mobile station
               is rejected by the network, given as an unsigned integer value
               (signature <literal>"u"</literal>).
             </listitem>
           </varlistentry>
         </variablelist>

         Optionally following items could be included if reported by modem along
         with network error.
         <variablelist>
           <varlistentry><term><literal>"operator-id"</literal></term>
             <listitem>
               Operator id reported along with network error, given as a string value (signature <literal>"s"</literal>).
             </listitem>
           </varlistentry>
           <varlistentry><term><literal>"operator-name"</literal></term>
             <listitem>
               Operator name reported along with network error, given as a string value (signature <literal>"s"</literal>).
             </listitem>
           </varlistentry>
           <varlistentry><term><literal>"access-technology"</literal></term>
             <listitem>
               A <link linkend="MMModemAccessTechnology">MMModemAccessTechnology</link>,
               specifying the available data class reported along with network error,
               given as an unsigned integer value (signature <literal>"u"</literal>).
             </listitem>
           </varlistentry>
         </variablelist>

         Since: 1.24
     -->
     <property name="NetworkRejection" type="a{sv}" access="read" />

     <!--
         OperatorCode:

         Code of the operator to which the mobile is currently registered.

         Returned in the format <literal>"MCCMNC"</literal>, where
         <literal>MCC</literal> is the three-digit ITU E.212 Mobile Country Code
         and <literal>MNC</literal> is the two- or three-digit GSM Mobile Network
         Code. e.g. e<literal>"31026"</literal> or <literal>"310260"</literal>.

         If the <literal>MCC</literal> and <literal>MNC</literal> are not known
         or the mobile is not registered to a mobile network, this property will
         be a zero-length (blank) string.

         Since: 1.0
     -->
     <property name="OperatorCode" type="s" access="read" />

     <!--
         OperatorName:

         Name of the operator to which the mobile is currently registered.

         If the operator name is not known or the mobile is not
         registered to a mobile network, this property will be a zero-length
         (blank) string.

         Since: 1.0
     -->
     <property name="OperatorName" type="s" access="read" />

     <!--
         EnabledFacilityLocks:

         Bitmask of <link linkend="MMModem3gppFacility">MMModem3gppFacility</link> values
         for which PIN locking is enabled.

         Since: 1.0
     -->
     <property name="EnabledFacilityLocks" type="u" access="read" />

     <!--
         DisableFacilityLock:
         @properties: A tuple of facility type and control key.

         Sends control key to modem to disable selected facility lock

         <variablelist>
         <varlistentry><term>"facility"</term>
           <listitem>
             <para>
               A <link linkend="MMModem3gppFacility">MMModem3gppFacility</link> value
               representing the type of the facility lock to disable.
             </para>
           </listitem>
         </varlistentry>
         <varlistentry><term>"control key"</term>
           <listitem>
             <para>
               Alphanumeric key required to unlock facility.
             </para>
           </listitem>
         </varlistentry>
         </variablelist>
     -->
     <method name="DisableFacilityLock">
         <arg name="properties" type="(us)" direction="in" />
     </method>

     <!--
         SetCarrierLock:
         @data: The list of carrier network information to be sent to be configured.

         Command to send the list of carrier network information to the modem.

         Since: 1.22
     -->
     <method name="SetCarrierLock">
       <arg name="data" type="ay" direction="in">
         <annotation name="org.gtk.GDBus.C.ForceGVariant" value="true"/>
       </arg>
     </method>

     <!--
         SetPacketServiceState:
         @state: a <link linkend="MMModem3gppPacketServiceState">MMModem3gppPacketServiceState</link>.

         Explicitly attach or detach packet service on the current registered network.

         Since: 1.20
     -->
     <method name="SetPacketServiceState">
       <arg name="state" type="u" direction="in" />
     </method>

     <!--
         SubscriptionState:

         A <link linkend="MMModem3gppSubscriptionState">MMModem3gppSubscriptionState</link>
         value representing the subscription status of the account and whether there
         is any data remaining, given as an unsigned integer (signature <literal>"u"</literal>).

         Since: 1.2

         Deprecated: 1.10.0. The value of this property can only be obtained with operator
         specific logic (e.g. processing specific PCO info), and therefore it doesn't make sense
         to expose it in the ModemManager interface.
     -->
     <property name="SubscriptionState" type="u" access="read" />

     <!--
         EpsUeModeOperation:

         A <link linkend="MMModem3gppEpsUeModeOperation">MMModem3gppEpsUeModeOperation</link>
         value representing the UE mode of operation for EPS, given as an unsigned integer
         (signature <literal>"u"</literal>).

         Since: 1.10
     -->
     <property name="EpsUeModeOperation" type="u" access="read" />

     <!--
         Pco:

         The raw PCOs received from the network, given as array of PCO
         elements (signature <literal>"a(ubay)"</literal>).

         Each PCO is defined as a sequence of 3 fields:
         <orderedlist>
           <listitem>
             The session ID associated with the PCO, given as an
             unsigned integer value (signature <literal>"u"</literal>).
           </listitem>
           <listitem>
             The flag that indicates whether the PCO data contains the
             complete PCO structure received from the network, given as
             a boolean value (signature <literal>"b"</literal>).
           </listitem>
           <listitem>
             The raw  PCO data, given as an array of bytes (signature
             <literal>"ay"</literal>).
           </listitem>
         </orderedlist>

         Since: 1.10
     -->
     <property name="Pco" type="a(ubay)" access="read" />

     <!--
         InitialEpsBearer:

         The object path for the initial default EPS bearer.

         Since: 1.10
     -->
     <property name="InitialEpsBearer" type="o" access="read" />

     <!--
         InitialEpsBearerSettings:

         List of properties requested by the device for the initial EPS bearer during
         LTE network attach procedure.

         The network may decide to use different settings during the actual device attach
         procedure, e.g. if the device is roaming or no explicit settings were requested,
         so the values shown in the
         #org.freedesktop.ModemManager1.Modem.Modem3gpp:InitialEpsBearer
         bearer object may be totally different.

         This is a read-only property, updating these settings should be done using the
         <link linkend="gdbus-method-org-freedesktop-ModemManager1-Modem-Modem3gpp.SetInitialEpsBearerSettings">SetInitialEpsBearerSettings()</link>
         method.

         Since: 1.10
     -->
     <property name="InitialEpsBearerSettings" type="a{sv}" access="read" />

     <!--
         PacketServiceState:

         A <link linkend="MMModem3gppPacketServiceState">MMModem3gppPacketServiceState</link>
         value specifying the packet domain service state.

         Since: 1.20
     -->
     <property name="PacketServiceState" type="u" access="read" />

     <!--
         Nr5gRegistrationSettings:

         5G specific registration settings.

         This is a read-only property, updating these settings should be done using the
         <link linkend="gdbus-method-org-freedesktop-ModemManager1-Modem-Modem3gpp.SetNr5gRegistrationSettings">Set5gNrRegistrationSettings()</link>
         method.

         <variablelist>
         <varlistentry><term>"mico-mode"</term>
           <listitem>
             <para>
               A <link linkend="MMModem3gppMicoMode">MMModem3gppMicoMode</link> value
               representing the Mobile Initiated Connection (MICO) mode requested by the host,
               given as an unsigned integer (signature <literal>"u"</literal>).
             </para>
           </listitem>
         </varlistentry>
         <varlistentry><term>"drx-cycle"</term>
           <listitem>
             <para>
               A <link linkend="MMModem3gppDrxCycle">MMModem3gppDrxCycle</link> value,
               representing the DRX settings requested by the host, given as an
               unsigned integer (signature <literal>"u"</literal>).
             </para>
           </listitem>
         </varlistentry>
         </variablelist>

         Since: 1.20
     -->
     <property name="Nr5gRegistrationSettings" type="a{sv}" access="read" />

   </interface>
 </node>
	<?xml version="1.0" encoding="UTF-8" ?>

	<!--
	ModemManager 1.0 Interface Specification

	Copyright (C) 2008 Novell, Inc.
	Copyright (C) 2008-2013 Red Hat, Inc.
	Copyright (C) 2011-2013 Google, Inc.
	Copyright (C) 2011-2013 Lanedo GmbH
	-->

	<node name="/" xmlns:doc="http://www.freedesktop.org/dbus/1.0/doc.dtd">

	<!--
	org.freedesktop.ModemManager1.Modem.Modem3gpp:
	@short_description: The ModemManager 3GPP interface.

	This interface provides access to specific actions that may be performed
	in modems with 3GPP capabilities.

	This interface will only be available once the modem is ready to be
	registered in the cellular network. 3GPP devices will require a valid
	unlocked SIM card before any of the features in the interface can be
	used.
	-->
	<interface name="org.freedesktop.ModemManager1.Modem.Modem3gpp">

	<!--
	Register:
	@operator_id: The operator ID (ie, <literal>"MCCMNC"</literal>, like <literal>"310260"</literal>) to register. An empty string can be used to register to the home network.

	Request registration with a given mobile network.

	Since: 1.0
	-->
	<method name="Register">
	<arg name="operator_id" type="s" direction="in" />
	</method>

	<!--
	Scan:
	@results: Array of dictionaries with the found networks.

	Scan for available networks.

	@results is an array of dictionaries with each array element describing
	a mobile network found in the scan. Each dictionary may include one or
	more of the following keys:
	<variablelist>
	<varlistentry><term><literal>"status"</literal></term>
	<listitem>
	A <link linkend="MMModem3gppNetworkAvailability">MMModem3gppNetworkAvailability</link>
	value representing network availability status, given as an
	unsigned integer (signature <literal>"u"</literal>). This key will
	always be present.
	</listitem>
	</varlistentry>
	<varlistentry><term><literal>"operator-long"</literal></term>
	<listitem>
	Long-format name of operator, given as a string value (signature
	<literal>"s"</literal>). If the name is unknown, this field
	should not be present.
	</listitem>
	</varlistentry>
	<varlistentry><term><literal>"operator-short"</literal></term>
	<listitem>
	Short-format name of operator, given as a string value (signature
	<literal>"s"</literal>). If the name is unknown, this field
	should not be present.
	</listitem>
	</varlistentry>
	<varlistentry><term><literal>"operator-code"</literal></term>
	<listitem>
	Mobile code of the operator, given as a string value (signature
	<literal>"s"</literal>). Returned in the format
	<literal>"MCCMNC"</literal>, where <literal>MCC</literal> is the
	three-digit ITU E.212 Mobile Country Code and <literal>MNC</literal>
	is the two- or three-digit GSM Mobile Network Code. e.g.
	<literal>"31026"</literal> or <literal>"310260"</literal>.
	</listitem>
	</varlistentry>
	<varlistentry><term><literal>"access-technology"</literal></term>
	<listitem>
	A <link linkend="MMModemAccessTechnology">MMModemAccessTechnology</link> value
	representing the generic access technology used by this mobile network,
	given as an unsigned integer (signature <literal>"u"</literal>).
	</listitem>
	</varlistentry>
	</variablelist>

	Since: 1.0
	-->
	<method name="Scan">
	<arg name="results" type="aa{sv}" direction="out" />
	</method>

	<!--
	SetEpsUeModeOperation:
	@mode: a <link linkend="MMModem3gppEpsUeModeOperation">MMModem3gppEpsUeModeOperation</link>.

	Sets the UE mode of operation for EPS.

	Since: 1.10
	-->
	<method name="SetEpsUeModeOperation">
	<arg name="mode" type="u" direction="in" />
	</method>

	<!--
	SetInitialEpsBearerSettings:
	@settings: List of properties to use when requesting the LTE attach procedure.

	Updates the default settings to be used in the initial default EPS bearer when registering to the LTE network.

	The allowed properties in this method are all the 3GPP-specific ones specified
	in the <link linkend="gdbus-property-org-freedesktop-ModemManager1-Bearer.Properties">bearer properties</link>;
	i.e.: <literal>"apn"</literal>, <literal>"ip-type"</literal>,
	<literal>"allowed-auth"</literal>, <literal>"user"</literal>, and
	<literal>"password"</literal>.

	Since: 1.10
	-->
	<method name="SetInitialEpsBearerSettings">
	<arg name="settings" type="a{sv}" direction="in" />
	</method>

	<!--
	SetNr5gRegistrationSettings:
	@properties: List of 5G specific registration settings.

	Updates the 5G specific registration settings configured in the device.

	The allowed properties in this method are all the ones specified in the
	<link linkend="gdbus-property-org-freedesktop-ModemManager1-Modem-Modem3gpp.Nr5gRegistrationSettings">Nr5gRegistrationSettings</link>;
	i.e.: <literal>"mico-mode"</literal> and <literal>"drx-cycle"</literal>.

	Since: 1.20
	-->
	<method name="SetNr5gRegistrationSettings">
	<arg name="properties" type="a{sv}" direction="in" />
	</method>

	<!--
	Imei:

	The <ulink url="http://en.wikipedia.org/wiki/Imei">IMEI</ulink> of the device.

	Since: 1.0
	-->
	<property name="Imei" type="s" access="read" />

	<!--
	RegistrationState:

	A <link linkend="MMModem3gppRegistrationState">MMModem3gppRegistrationState</link>
	value specifying the mobile registration status as defined in 3GPP TS 27.007
	section 10.1.19.

	Since: 1.0
	-->
	<property name="RegistrationState" type="u" access="read" />

	<!--
	NetworkRejection:

	This property holds the latest network rejection information received from the
	network during registration failure, and it will be cleared whenever the modem
	successfully registers.
	Network errors are defined in 3GPP TS 24.008 in sections 10.5.3.6 and
	10.5.5.14 (detailed in annex G) and in 3GPP TS 24.301 in section 9.9.3.9.

	Mandatory items include:
	<variablelist>
	<varlistentry><term><literal>"error"</literal></term>
	<listitem>
	A <link linkend="MMNetworkError">MMNetworkError</link>,
	specifying the reason why a request from the mobile station
	is rejected by the network, given as an unsigned integer value
	(signature <literal>"u"</literal>).
	</listitem>
	</varlistentry>
	</variablelist>

	Optionally following items could be included if reported by modem along
	with network error.
	<variablelist>
	<varlistentry><term><literal>"operator-id"</literal></term>
	<listitem>
	Operator id reported along with network error, given as a string value (signature <literal>"s"</literal>).
	</listitem>
	</varlistentry>
	<varlistentry><term><literal>"operator-name"</literal></term>
	<listitem>
	Operator name reported along with network error, given as a string value (signature <literal>"s"</literal>).
	</listitem>
	</varlistentry>
	<varlistentry><term><literal>"access-technology"</literal></term>
	<listitem>
	A <link linkend="MMModemAccessTechnology">MMModemAccessTechnology</link>,
	specifying the available data class reported along with network error,
	given as an unsigned integer value (signature <literal>"u"</literal>).
	</listitem>
	</varlistentry>
	</variablelist>

	Since: 1.24
	-->
	<property name="NetworkRejection" type="a{sv}" access="read" />

	<!--
	OperatorCode:

	Code of the operator to which the mobile is currently registered.

	Returned in the format <literal>"MCCMNC"</literal>, where
	<literal>MCC</literal> is the three-digit ITU E.212 Mobile Country Code
	and <literal>MNC</literal> is the two- or three-digit GSM Mobile Network
	Code. e.g. e<literal>"31026"</literal> or <literal>"310260"</literal>.

	If the <literal>MCC</literal> and <literal>MNC</literal> are not known
	or the mobile is not registered to a mobile network, this property will
	be a zero-length (blank) string.

	Since: 1.0
	-->
	<property name="OperatorCode" type="s" access="read" />

	<!--
	OperatorName:

	Name of the operator to which the mobile is currently registered.

	If the operator name is not known or the mobile is not
	registered to a mobile network, this property will be a zero-length
	(blank) string.

	Since: 1.0
	-->
	<property name="OperatorName" type="s" access="read" />

	<!--
	EnabledFacilityLocks:

	Bitmask of <link linkend="MMModem3gppFacility">MMModem3gppFacility</link> values
	for which PIN locking is enabled.

	Since: 1.0
	-->
	<property name="EnabledFacilityLocks" type="u" access="read" />

	<!--
	DisableFacilityLock:
	@properties: A tuple of facility type and control key.

	Sends control key to modem to disable selected facility lock

	<variablelist>
	<varlistentry><term>"facility"</term>
	<listitem>
	<para>
	A <link linkend="MMModem3gppFacility">MMModem3gppFacility</link> value
	representing the type of the facility lock to disable.
	</para>
	</listitem>
	</varlistentry>
	<varlistentry><term>"control key"</term>
	<listitem>
	<para>
	Alphanumeric key required to unlock facility.
	</para>
	</listitem>
	</varlistentry>
	</variablelist>
	-->
	<method name="DisableFacilityLock">
	<arg name="properties" type="(us)" direction="in" />
	</method>

	<!--
	SetCarrierLock:
	@data: The list of carrier network information to be sent to be configured.

	Command to send the list of carrier network information to the modem.

	Since: 1.22
	-->
	<method name="SetCarrierLock">
	<arg name="data" type="ay" direction="in">
	<annotation name="org.gtk.GDBus.C.ForceGVariant" value="true"/>
	</arg>
	</method>

	<!--
	SetPacketServiceState:
	@state: a <link linkend="MMModem3gppPacketServiceState">MMModem3gppPacketServiceState</link>.

	Explicitly attach or detach packet service on the current registered network.

	Since: 1.20
	-->
	<method name="SetPacketServiceState">
	<arg name="state" type="u" direction="in" />
	</method>

	<!--
	SubscriptionState:

	A <link linkend="MMModem3gppSubscriptionState">MMModem3gppSubscriptionState</link>
	value representing the subscription status of the account and whether there
	is any data remaining, given as an unsigned integer (signature <literal>"u"</literal>).

	Since: 1.2

	Deprecated: 1.10.0. The value of this property can only be obtained with operator
	specific logic (e.g. processing specific PCO info), and therefore it doesn't make sense
	to expose it in the ModemManager interface.
	-->
	<property name="SubscriptionState" type="u" access="read" />

	<!--
	EpsUeModeOperation:

	A <link linkend="MMModem3gppEpsUeModeOperation">MMModem3gppEpsUeModeOperation</link>
	value representing the UE mode of operation for EPS, given as an unsigned integer
	(signature <literal>"u"</literal>).

	Since: 1.10
	-->
	<property name="EpsUeModeOperation" type="u" access="read" />

	<!--
	Pco:

	The raw PCOs received from the network, given as array of PCO
	elements (signature <literal>"a(ubay)"</literal>).

	Each PCO is defined as a sequence of 3 fields:
	<orderedlist>
	<listitem>
	The session ID associated with the PCO, given as an
	unsigned integer value (signature <literal>"u"</literal>).
	</listitem>
	<listitem>
	The flag that indicates whether the PCO data contains the
	complete PCO structure received from the network, given as
	a boolean value (signature <literal>"b"</literal>).
	</listitem>
	<listitem>
	The raw PCO data, given as an array of bytes (signature
	<literal>"ay"</literal>).
	</listitem>
	</orderedlist>

	Since: 1.10
	-->
	<property name="Pco" type="a(ubay)" access="read" />

	<!--
	InitialEpsBearer:

	The object path for the initial default EPS bearer.

	Since: 1.10
	-->
	<property name="InitialEpsBearer" type="o" access="read" />

	<!--
	InitialEpsBearerSettings:

	List of properties requested by the device for the initial EPS bearer during
	LTE network attach procedure.

	The network may decide to use different settings during the actual device attach
	procedure, e.g. if the device is roaming or no explicit settings were requested,
	so the values shown in the
	#org.freedesktop.ModemManager1.Modem.Modem3gpp:InitialEpsBearer
	bearer object may be totally different.

	This is a read-only property, updating these settings should be done using the
	<link linkend="gdbus-method-org-freedesktop-ModemManager1-Modem-Modem3gpp.SetInitialEpsBearerSettings">SetInitialEpsBearerSettings()</link>
	method.

	Since: 1.10
	-->
	<property name="InitialEpsBearerSettings" type="a{sv}" access="read" />

	<!--
	PacketServiceState:

	A <link linkend="MMModem3gppPacketServiceState">MMModem3gppPacketServiceState</link>
	value specifying the packet domain service state.

	Since: 1.20
	-->
	<property name="PacketServiceState" type="u" access="read" />

	<!--
	Nr5gRegistrationSettings:

	5G specific registration settings.

	This is a read-only property, updating these settings should be done using the
	<link linkend="gdbus-method-org-freedesktop-ModemManager1-Modem-Modem3gpp.SetNr5gRegistrationSettings">Set5gNrRegistrationSettings()</link>
	method.

	<variablelist>
	<varlistentry><term>"mico-mode"</term>
	<listitem>
	<para>
	A <link linkend="MMModem3gppMicoMode">MMModem3gppMicoMode</link> value
	representing the Mobile Initiated Connection (MICO) mode requested by the host,
	given as an unsigned integer (signature <literal>"u"</literal>).
	</para>
	</listitem>
	</varlistentry>
	<varlistentry><term>"drx-cycle"</term>
	<listitem>
	<para>
	A <link linkend="MMModem3gppDrxCycle">MMModem3gppDrxCycle</link> value,
	representing the DRX settings requested by the host, given as an
	unsigned integer (signature <literal>"u"</literal>).
	</para>
	</listitem>
	</varlistentry>
	</variablelist>

	Since: 1.20
	-->
	<property name="Nr5gRegistrationSettings" type="a{sv}" access="read" />

	</interface>
	</node>