blob: 98a6b0ffb5731034be51158bba0ebdd04ddb07bd [file] [log] [blame]
Virtio devices and migration
============================
Copyright 2015 IBM Corp.
This work is licensed under the terms of the GNU GPL, version 2 or later. See
the COPYING file in the top-level directory.
Saving and restoring the state of virtio devices is a bit of a twisty maze,
for several reasons:
- state is distributed between several parts:
- virtio core, for common fields like features, number of queues, ...
- virtio transport (pci, ccw, ...), for the different proxy devices and
transport specific state (msix vectors, indicators, ...)
- virtio device (net, blk, ...), for the different device types and their
state (mac address, request queue, ...)
- most fields are saved via the stream interface; subsequently, subsections
have been added to make cross-version migration possible
This file attempts to document the current procedure and point out some
caveats.
Save state procedure
====================
virtio core virtio transport virtio device
----------- ---------------- -------------
save() function registered
via VMState wrapper on
device class
virtio_save() <----------
------> save_config()
- save proxy device
- save transport-specific
device fields
- save common device
fields
- save common virtqueue
fields
------> save_queue()
- save transport-specific
virtqueue fields
------> save_device()
- save device-specific
fields
- save subsections
- device endianness,
if changed from
default endianness
- 64 bit features, if
any high feature bit
is set
- virtio-1 virtqueue
fields, if VERSION_1
is set
Load state procedure
====================
virtio core virtio transport virtio device
----------- ---------------- -------------
load() function registered
via VMState wrapper on
device class
virtio_load() <----------
------> load_config()
- load proxy device
- load transport-specific
device fields
- load common device
fields
- load common virtqueue
fields
------> load_queue()
- load transport-specific
virtqueue fields
- notify guest
------> load_device()
- load device-specific
fields
- load subsections
- device endianness
- 64 bit features
- virtio-1 virtqueue
fields
- sanitize endianness
- sanitize features
- virtqueue index sanity
check
- feature-dependent setup
Implications of this setup
==========================
Devices need to be careful in their state processing during load: The
load_device() procedure is invoked by the core before subsections have
been loaded. Any code that depends on information transmitted in subsections
therefore has to be invoked in the device's load() function _after_
virtio_load() returned (like e.g. code depending on features).
Any extension of the state being migrated should be done in subsections
added to the core for compatibility reasons. If transport or device specific
state is added, core needs to invoke a callback from the new subsection.