| /* |
| * xtensa/config/system.h -- HAL definitions that are dependent on SYSTEM configuration |
| * |
| * NOTE: The location and contents of this file are highly subject to change. |
| * |
| * Source for configuration-independent binaries (which link in a |
| * configuration-specific HAL library) must NEVER include this file. |
| * The HAL itself has historically included this file in some instances, |
| * but this is not appropriate either, because the HAL is meant to be |
| * core-specific but system independent. |
| */ |
| |
| /* Customer ID=4313; Build=0x5483b; Copyright (c) 2000-2010 Tensilica Inc. |
| |
| Permission is hereby granted, free of charge, to any person obtaining |
| a copy of this software and associated documentation files (the |
| "Software"), to deal in the Software without restriction, including |
| without limitation the rights to use, copy, modify, merge, publish, |
| distribute, sublicense, and/or sell copies of the Software, and to |
| permit persons to whom the Software is furnished to do so, subject to |
| the following conditions: |
| |
| The above copyright notice and this permission notice shall be included |
| in all copies or substantial portions of the Software. |
| |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. |
| IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY |
| CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ |
| |
| |
| #ifndef XTENSA_CONFIG_SYSTEM_H |
| #define XTENSA_CONFIG_SYSTEM_H |
| |
| /*#include <xtensa/hal.h>*/ |
| |
| |
| |
| /*---------------------------------------------------------------------- |
| CONFIGURED SOFTWARE OPTIONS |
| ----------------------------------------------------------------------*/ |
| |
| #define XSHAL_USE_ABSOLUTE_LITERALS 0 /* (sw-only option, whether software uses absolute literals) */ |
| #define XSHAL_HAVE_TEXT_SECTION_LITERALS 1 /* Set if there is some memory that allows both code and literals. */ |
| |
| #define XSHAL_ABI XTHAL_ABI_CALL0 /* (sw-only option, selected ABI) */ |
| /* The above maps to one of the following constants: */ |
| #define XTHAL_ABI_WINDOWED 0 |
| #define XTHAL_ABI_CALL0 1 |
| /* Alternatives: */ |
| /*#define XSHAL_WINDOWED_ABI 1*/ /* set if windowed ABI selected */ |
| /*#define XSHAL_CALL0_ABI 0*/ /* set if call0 ABI selected */ |
| |
| #define XSHAL_CLIB XTHAL_CLIB_NEWLIB /* (sw-only option, selected C library) */ |
| /* The above maps to one of the following constants: */ |
| #define XTHAL_CLIB_NEWLIB 0 |
| #define XTHAL_CLIB_UCLIBC 1 |
| #define XTHAL_CLIB_XCLIB 2 |
| /* Alternatives: */ |
| /*#define XSHAL_NEWLIB 1*/ /* set if newlib C library selected */ |
| /*#define XSHAL_UCLIBC 0*/ /* set if uCLibC C library selected */ |
| /*#define XSHAL_XCLIB 0*/ /* set if Xtensa C library selected */ |
| |
| #define XSHAL_USE_FLOATING_POINT 1 |
| |
| #define XSHAL_FLOATING_POINT_ABI 0 |
| |
| /*---------------------------------------------------------------------- |
| DEVICE ADDRESSES |
| ----------------------------------------------------------------------*/ |
| |
| /* |
| * Strange place to find these, but the configuration GUI |
| * allows moving these around to account for various core |
| * configurations. Specific boards (and their BSP software) |
| * will have specific meanings for these components. |
| */ |
| |
| /* I/O Block areas: */ |
| #define XSHAL_IOBLOCK_CACHED_VADDR 0x70000000 |
| #define XSHAL_IOBLOCK_CACHED_PADDR 0x70000000 |
| #define XSHAL_IOBLOCK_CACHED_SIZE 0x0E000000 |
| |
| #define XSHAL_IOBLOCK_BYPASS_VADDR 0x90000000 |
| #define XSHAL_IOBLOCK_BYPASS_PADDR 0x90000000 |
| #define XSHAL_IOBLOCK_BYPASS_SIZE 0x0E000000 |
| |
| /* System ROM: */ |
| #define XSHAL_ROM_VADDR 0x50000000 |
| #define XSHAL_ROM_PADDR 0x50000000 |
| #define XSHAL_ROM_SIZE 0x01000000 |
| /* Largest available area (free of vectors): */ |
| #define XSHAL_ROM_AVAIL_VADDR 0x50000300 |
| #define XSHAL_ROM_AVAIL_VSIZE 0x00FFFD00 |
| |
| /* System RAM: */ |
| #define XSHAL_RAM_VADDR 0x60000000 |
| #define XSHAL_RAM_PADDR 0x60000000 |
| #define XSHAL_RAM_VSIZE 0x04000000 |
| #define XSHAL_RAM_PSIZE 0x04000000 |
| #define XSHAL_RAM_SIZE XSHAL_RAM_PSIZE |
| /* Largest available area (free of vectors): */ |
| #define XSHAL_RAM_AVAIL_VADDR 0x60000400 |
| #define XSHAL_RAM_AVAIL_VSIZE 0x03FFFC00 |
| |
| /* |
| * Shadow system RAM (same device as system RAM, at different address). |
| * (Emulation boards need this for the SONIC Ethernet driver |
| * when data caches are configured for writeback mode.) |
| * NOTE: on full MMU configs, this points to the BYPASS virtual address |
| * of system RAM, ie. is the same as XSHAL_RAM_* except that virtual |
| * addresses are viewed through the BYPASS static map rather than |
| * the CACHED static map. |
| */ |
| #define XSHAL_RAM_BYPASS_VADDR 0xA0000000 |
| #define XSHAL_RAM_BYPASS_PADDR 0xA0000000 |
| #define XSHAL_RAM_BYPASS_PSIZE 0x04000000 |
| |
| /* Alternate system RAM (different device than system RAM): */ |
| /*#define XSHAL_ALTRAM_[VP]ADDR ...not configured...*/ |
| /*#define XSHAL_ALTRAM_SIZE ...not configured...*/ |
| |
| /* Some available location in which to place devices in a simulation (eg. XTMP): */ |
| #define XSHAL_SIMIO_CACHED_VADDR 0xC0000000 |
| #define XSHAL_SIMIO_BYPASS_VADDR 0xC0000000 |
| #define XSHAL_SIMIO_PADDR 0xC0000000 |
| #define XSHAL_SIMIO_SIZE 0x20000000 |
| |
| |
| /*---------------------------------------------------------------------- |
| * For use by reference testbench exit and diagnostic routines. |
| */ |
| #define XSHAL_MAGIC_EXIT 0x0 |
| |
| /*---------------------------------------------------------------------- |
| * DEVICE-ADDRESS DEPENDENT... |
| * |
| * Values written to CACHEATTR special register (or its equivalent) |
| * to enable and disable caches in various modes. |
| *----------------------------------------------------------------------*/ |
| |
| /*---------------------------------------------------------------------- |
| BACKWARD COMPATIBILITY ... |
| ----------------------------------------------------------------------*/ |
| |
| /* |
| * NOTE: the following two macros are DEPRECATED. Use the latter |
| * board-specific macros instead, which are specially tuned for the |
| * particular target environments' memory maps. |
| */ |
| #define XSHAL_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS /* disable caches in bypass mode */ |
| #define XSHAL_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT /* default setting to enable caches (no writeback!) */ |
| |
| /*---------------------------------------------------------------------- |
| GENERIC |
| ----------------------------------------------------------------------*/ |
| |
| /* For the following, a 512MB region is used if it contains a system (PIF) RAM, |
| * system (PIF) ROM, local memory, or XLMI. */ |
| |
| /* These set any unused 512MB region to cache-BYPASS attribute: */ |
| #define XSHAL_ALLVALID_CACHEATTR_WRITEBACK 0x22224442 /* enable caches in write-back mode */ |
| #define XSHAL_ALLVALID_CACHEATTR_WRITEALLOC 0x22221112 /* enable caches in write-allocate mode */ |
| #define XSHAL_ALLVALID_CACHEATTR_WRITETHRU 0x22221112 /* enable caches in write-through mode */ |
| #define XSHAL_ALLVALID_CACHEATTR_BYPASS 0x22222222 /* disable caches in bypass mode */ |
| #define XSHAL_ALLVALID_CACHEATTR_DEFAULT XSHAL_ALLVALID_CACHEATTR_WRITEBACK /* default setting to enable caches */ |
| |
| /* These set any unused 512MB region to ILLEGAL attribute: */ |
| #define XSHAL_STRICT_CACHEATTR_WRITEBACK 0xFFFF444F /* enable caches in write-back mode */ |
| #define XSHAL_STRICT_CACHEATTR_WRITEALLOC 0xFFFF111F /* enable caches in write-allocate mode */ |
| #define XSHAL_STRICT_CACHEATTR_WRITETHRU 0xFFFF111F /* enable caches in write-through mode */ |
| #define XSHAL_STRICT_CACHEATTR_BYPASS 0xFFFF222F /* disable caches in bypass mode */ |
| #define XSHAL_STRICT_CACHEATTR_DEFAULT XSHAL_STRICT_CACHEATTR_WRITEBACK /* default setting to enable caches */ |
| |
| /* These set the first 512MB, if unused, to ILLEGAL attribute to help catch |
| * NULL-pointer dereference bugs; all other unused 512MB regions are set |
| * to cache-BYPASS attribute: */ |
| #define XSHAL_TRAPNULL_CACHEATTR_WRITEBACK 0x2222444F /* enable caches in write-back mode */ |
| #define XSHAL_TRAPNULL_CACHEATTR_WRITEALLOC 0x2222111F /* enable caches in write-allocate mode */ |
| #define XSHAL_TRAPNULL_CACHEATTR_WRITETHRU 0x2222111F /* enable caches in write-through mode */ |
| #define XSHAL_TRAPNULL_CACHEATTR_BYPASS 0x2222222F /* disable caches in bypass mode */ |
| #define XSHAL_TRAPNULL_CACHEATTR_DEFAULT XSHAL_TRAPNULL_CACHEATTR_WRITEBACK /* default setting to enable caches */ |
| |
| /*---------------------------------------------------------------------- |
| ISS (Instruction Set Simulator) SPECIFIC ... |
| ----------------------------------------------------------------------*/ |
| |
| /* For now, ISS defaults to the TRAPNULL settings: */ |
| #define XSHAL_ISS_CACHEATTR_WRITEBACK XSHAL_TRAPNULL_CACHEATTR_WRITEBACK |
| #define XSHAL_ISS_CACHEATTR_WRITEALLOC XSHAL_TRAPNULL_CACHEATTR_WRITEALLOC |
| #define XSHAL_ISS_CACHEATTR_WRITETHRU XSHAL_TRAPNULL_CACHEATTR_WRITETHRU |
| #define XSHAL_ISS_CACHEATTR_BYPASS XSHAL_TRAPNULL_CACHEATTR_BYPASS |
| #define XSHAL_ISS_CACHEATTR_DEFAULT XSHAL_TRAPNULL_CACHEATTR_WRITEBACK |
| |
| #define XSHAL_ISS_PIPE_REGIONS 0 |
| #define XSHAL_ISS_SDRAM_REGIONS 0 |
| |
| |
| /*---------------------------------------------------------------------- |
| XT2000 BOARD SPECIFIC ... |
| ----------------------------------------------------------------------*/ |
| |
| /* For the following, a 512MB region is used if it contains any system RAM, |
| * system ROM, local memory, XLMI, or other XT2000 board device or memory. |
| * Regions containing devices are forced to cache-BYPASS mode regardless |
| * of whether the macro is _WRITEBACK vs. _BYPASS etc. */ |
| |
| /* These set any 512MB region unused on the XT2000 to ILLEGAL attribute: */ |
| #define XSHAL_XT2000_CACHEATTR_WRITEBACK 0xFF22444F /* enable caches in write-back mode */ |
| #define XSHAL_XT2000_CACHEATTR_WRITEALLOC 0xFF22111F /* enable caches in write-allocate mode */ |
| #define XSHAL_XT2000_CACHEATTR_WRITETHRU 0xFF22111F /* enable caches in write-through mode */ |
| #define XSHAL_XT2000_CACHEATTR_BYPASS 0xFF22222F /* disable caches in bypass mode */ |
| #define XSHAL_XT2000_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_WRITEBACK /* default setting to enable caches */ |
| |
| #define XSHAL_XT2000_PIPE_REGIONS 0x00000000 /* BusInt pipeline regions */ |
| #define XSHAL_XT2000_SDRAM_REGIONS 0x00000440 /* BusInt SDRAM regions */ |
| |
| |
| /*---------------------------------------------------------------------- |
| VECTOR INFO AND SIZES |
| ----------------------------------------------------------------------*/ |
| |
| #define XSHAL_VECTORS_PACKED 0 |
| #define XSHAL_STATIC_VECTOR_SELECT 0 |
| #define XSHAL_RESET_VECTOR_VADDR 0x50000000 |
| #define XSHAL_RESET_VECTOR_PADDR 0x50000000 |
| |
| /* |
| * Sizes allocated to vectors by the system (memory map) configuration. |
| * These sizes are constrained by core configuration (eg. one vector's |
| * code cannot overflow into another vector) but are dependent on the |
| * system or board (or LSP) memory map configuration. |
| * |
| * Whether or not each vector happens to be in a system ROM is also |
| * a system configuration matter, sometimes useful, included here also: |
| */ |
| #define XSHAL_RESET_VECTOR_SIZE 0x00000300 |
| #define XSHAL_RESET_VECTOR_ISROM 1 |
| #define XSHAL_USER_VECTOR_SIZE 0x00000038 |
| #define XSHAL_USER_VECTOR_ISROM 0 |
| #define XSHAL_PROGRAMEXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ |
| #define XSHAL_USEREXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ |
| #define XSHAL_KERNEL_VECTOR_SIZE 0x00000038 |
| #define XSHAL_KERNEL_VECTOR_ISROM 0 |
| #define XSHAL_STACKEDEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ |
| #define XSHAL_KERNELEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ |
| #define XSHAL_DOUBLEEXC_VECTOR_SIZE 0x00000040 |
| #define XSHAL_DOUBLEEXC_VECTOR_ISROM 0 |
| #define XSHAL_WINDOW_VECTORS_SIZE 0x00000178 |
| #define XSHAL_WINDOW_VECTORS_ISROM 0 |
| #define XSHAL_INTLEVEL2_VECTOR_SIZE 0x00000038 |
| #define XSHAL_INTLEVEL2_VECTOR_ISROM 0 |
| #define XSHAL_INTLEVEL3_VECTOR_SIZE 0x00000038 |
| #define XSHAL_INTLEVEL3_VECTOR_ISROM 0 |
| #define XSHAL_INTLEVEL4_VECTOR_SIZE 0x00000038 |
| #define XSHAL_INTLEVEL4_VECTOR_ISROM 0 |
| #define XSHAL_INTLEVEL5_VECTOR_SIZE 0x00000038 |
| #define XSHAL_INTLEVEL5_VECTOR_ISROM 0 |
| #define XSHAL_INTLEVEL6_VECTOR_SIZE 0x00000038 |
| #define XSHAL_INTLEVEL6_VECTOR_ISROM 0 |
| #define XSHAL_DEBUG_VECTOR_SIZE XSHAL_INTLEVEL6_VECTOR_SIZE |
| #define XSHAL_DEBUG_VECTOR_ISROM XSHAL_INTLEVEL6_VECTOR_ISROM |
| #define XSHAL_NMI_VECTOR_SIZE 0x00000038 |
| #define XSHAL_NMI_VECTOR_ISROM 0 |
| #define XSHAL_INTLEVEL7_VECTOR_SIZE XSHAL_NMI_VECTOR_SIZE |
| |
| |
| #endif /*XTENSA_CONFIG_SYSTEM_H*/ |
| |
