| #include <common.h> |
| #include <exports.h> |
| |
| #ifndef GCC_VERSION |
| #define GCC_VERSION (__GNUC__ * 1000 + __GNUC_MINOR__) |
| #endif /* GCC_VERSION */ |
| |
| #if defined(CONFIG_X86) |
| /* |
| * x86 does not have a dedicated register to store the pointer to |
| * the global_data. Thus the jump table address is stored in a |
| * global variable, but such approach does not allow for execution |
| * from flash memory. The global_data address is passed as argv[-1] |
| * to the application program. |
| */ |
| static void **jt; |
| gd_t *global_data; |
| |
| #define EXPORT_FUNC(x) \ |
| asm volatile ( \ |
| " .globl " #x "\n" \ |
| #x ":\n" \ |
| " movl %0, %%eax\n" \ |
| " movl jt, %%ecx\n" \ |
| " jmp *(%%ecx, %%eax)\n" \ |
| : : "i"(XF_ ## x * sizeof(void *)) : "eax", "ecx"); |
| #elif defined(CONFIG_PPC) |
| /* |
| * r2 holds the pointer to the global_data, r11 is a call-clobbered |
| * register |
| */ |
| #define EXPORT_FUNC(x) \ |
| asm volatile ( \ |
| " .globl " #x "\n" \ |
| #x ":\n" \ |
| " lwz %%r11, %0(%%r2)\n" \ |
| " lwz %%r11, %1(%%r11)\n" \ |
| " mtctr %%r11\n" \ |
| " bctr\n" \ |
| : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r11"); |
| #elif defined(CONFIG_ARM) |
| /* |
| * r8 holds the pointer to the global_data, ip is a call-clobbered |
| * register |
| */ |
| #define EXPORT_FUNC(x) \ |
| asm volatile ( \ |
| " .globl " #x "\n" \ |
| #x ":\n" \ |
| " ldr ip, [r8, %0]\n" \ |
| " ldr pc, [ip, %1]\n" \ |
| : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "ip"); |
| #elif defined(CONFIG_MIPS) |
| /* |
| * k0 ($26) holds the pointer to the global_data; t9 ($25) is a call- |
| * clobbered register that is also used to set gp ($26). Note that the |
| * jr instruction also executes the instruction immediately following |
| * it; however, GCC/mips generates an additional `nop' after each asm |
| * statement |
| */ |
| #define EXPORT_FUNC(x) \ |
| asm volatile ( \ |
| " .globl " #x "\n" \ |
| #x ":\n" \ |
| " lw $25, %0($26)\n" \ |
| " lw $25, %1($25)\n" \ |
| " jr $25\n" \ |
| : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "t9"); |
| #elif defined(CONFIG_NIOS2) |
| /* |
| * gp holds the pointer to the global_data, r8 is call-clobbered |
| */ |
| #define EXPORT_FUNC(x) \ |
| asm volatile ( \ |
| " .globl " #x "\n" \ |
| #x ":\n" \ |
| " movhi r8, %%hi(%0)\n" \ |
| " ori r8, r0, %%lo(%0)\n" \ |
| " add r8, r8, gp\n" \ |
| " ldw r8, 0(r8)\n" \ |
| " ldw r8, %1(r8)\n" \ |
| " jmp r8\n" \ |
| : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "gp"); |
| #elif defined(CONFIG_M68K) |
| /* |
| * d7 holds the pointer to the global_data, a0 is a call-clobbered |
| * register |
| */ |
| #define EXPORT_FUNC(x) \ |
| asm volatile ( \ |
| " .globl " #x "\n" \ |
| #x ":\n" \ |
| " move.l %%d7, %%a0\n" \ |
| " adda.l %0, %%a0\n" \ |
| " move.l (%%a0), %%a0\n" \ |
| " adda.l %1, %%a0\n" \ |
| " move.l (%%a0), %%a0\n" \ |
| " jmp (%%a0)\n" \ |
| : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "a0"); |
| #elif defined(CONFIG_MICROBLAZE) |
| /* |
| * r31 holds the pointer to the global_data. r5 is a call-clobbered. |
| */ |
| #define EXPORT_FUNC(x) \ |
| asm volatile ( \ |
| " .globl " #x "\n" \ |
| #x ":\n" \ |
| " lwi r5, r31, %0\n" \ |
| " lwi r5, r5, %1\n" \ |
| " bra r5\n" \ |
| : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r5"); |
| #elif defined(CONFIG_BLACKFIN) |
| /* |
| * P3 holds the pointer to the global_data, P0 is a call-clobbered |
| * register |
| */ |
| #define EXPORT_FUNC(x) \ |
| asm volatile ( \ |
| " .globl _" #x "\n_" \ |
| #x ":\n" \ |
| " P0 = [P3 + %0]\n" \ |
| " P0 = [P0 + %1]\n" \ |
| " JUMP (P0)\n" \ |
| : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "P0"); |
| #elif defined(CONFIG_AVR32) |
| /* |
| * r6 holds the pointer to the global_data. r8 is call clobbered. |
| */ |
| #define EXPORT_FUNC(x) \ |
| asm volatile( \ |
| " .globl\t" #x "\n" \ |
| #x ":\n" \ |
| " ld.w r8, r6[%0]\n" \ |
| " ld.w pc, r8[%1]\n" \ |
| : \ |
| : "i"(offsetof(gd_t, jt)), "i"(XF_ ##x) \ |
| : "r8"); |
| #elif defined(CONFIG_SH) |
| /* |
| * r13 holds the pointer to the global_data. r1 is a call clobbered. |
| */ |
| #define EXPORT_FUNC(x) \ |
| asm volatile ( \ |
| " .align 2\n" \ |
| " .globl " #x "\n" \ |
| #x ":\n" \ |
| " mov r13, r1\n" \ |
| " add %0, r1\n" \ |
| " mov.l @r1, r2\n" \ |
| " add %1, r2\n" \ |
| " mov.l @r2, r1\n" \ |
| " jmp @r1\n" \ |
| " nop\n" \ |
| " nop\n" \ |
| : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r1", "r2"); |
| #elif defined(CONFIG_SPARC) |
| /* |
| * g7 holds the pointer to the global_data. g1 is call clobbered. |
| */ |
| #define EXPORT_FUNC(x) \ |
| asm volatile( \ |
| " .globl\t" #x "\n" \ |
| #x ":\n" \ |
| " set %0, %%g1\n" \ |
| " or %%g1, %%g7, %%g1\n" \ |
| " ld [%%g1], %%g1\n" \ |
| " ld [%%g1 + %1], %%g1\n" \ |
| " jmp %%g1\n" \ |
| " nop\n" \ |
| : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "g1" ); |
| #elif defined(CONFIG_NDS32) |
| /* |
| * r16 holds the pointer to the global_data. gp is call clobbered. |
| * not support reduced register (16 GPR). |
| */ |
| #define EXPORT_FUNC(x) \ |
| asm volatile ( \ |
| " .globl " #x "\n" \ |
| #x ":\n" \ |
| " lwi $r16, [$gp + (%0)]\n" \ |
| " lwi $r16, [$r16 + (%1)]\n" \ |
| " jr $r16\n" \ |
| : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "$r16"); |
| #elif defined(CONFIG_OPENRISC) |
| /* |
| * r10 holds the pointer to the global_data, r13 is a call-clobbered |
| * register |
| */ |
| #define EXPORT_FUNC(x) \ |
| asm volatile ( \ |
| " .globl " #x "\n" \ |
| #x ":\n" \ |
| " l.lwz r13, %0(r10)\n" \ |
| " l.lwz r13, %1(r13)\n" \ |
| " l.jr r13\n" \ |
| " l.nop\n" \ |
| : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r13"); |
| #else |
| /*" addi $sp, $sp, -24\n" \ |
| " br $r16\n" \*/ |
| |
| #error stubs definition missing for this architecture |
| #endif |
| |
| /* This function is necessary to prevent the compiler from |
| * generating prologue/epilogue, preparing stack frame etc. |
| * The stub functions are special, they do not use the stack |
| * frame passed to them, but pass it intact to the actual |
| * implementation. On the other hand, asm() statements with |
| * arguments can be used only inside the functions (gcc limitation) |
| */ |
| #if GCC_VERSION < 3004 |
| static |
| #endif /* GCC_VERSION */ |
| void __attribute__((unused)) dummy(void) |
| { |
| #include <_exports.h> |
| } |
| |
| #include <asm-generic/sections.h> |
| |
| void app_startup(char * const *argv) |
| { |
| char *cp = __bss_start; |
| |
| /* Zero out BSS */ |
| while (cp < _end) |
| *cp++ = 0; |
| |
| #if defined(CONFIG_X86) |
| /* x86 does not have a dedicated register for passing global_data */ |
| global_data = (gd_t *)argv[-1]; |
| jt = global_data->jt; |
| #endif |
| } |
| |
| #undef EXPORT_FUNC |