Nanopb: Migration from older versions

This document details all the breaking changes that have been made to nanopb since its initial release. For each change, the rationale and required modifications of user applications are explained. Also any error indications are included, in order to make it easier to find this document.

Nanopb-0.4.4 (2020-11-25)

Remove outdated generator/nanopb/options.proto

Changes: Back in 2018, it was considered in pull request #241 to move nanopb generator options to a separate namespace. For this reason, a transitional file was added. It was later abandoned and is now removed to avoid confusion.

Required actions: Most nanopb users probably never used that transitional file at all. If your .proto files import it, change to using generator/proto/nanopb.proto.

Error indications: Errors about missing file options.proto when running the generator.

Nanopb-0.4.3 (2020-09-21)

pb_msgdesc_t struct has new fields

Changes: New fields required_field_count and largest_tag were added to pb_msgdesc_t and existing fields were reordered.

Required actions: All .pb.c files must be recompiled. Regeneration is not needed.

Error indications: Messages may fail to encode or decode, or the code can crash inside load_descriptor_values() in pb_common.c.

Nanopb-0.4.2 (2020-06-23)

Generator now uses Python 3 by default

Rationale: Previously had hashbang of #!/usr/bin/env python, which would execute with Python 2 on most systems. Python 2 is now deprecated and many libraries are dropping support for it, which makes installing dependencies difficult. While has worked with Python 3 for years now, and overriding the python version was possible with virtualenv, that was an extra complication.

Changes: Hashbang now uses #!/usr/bin/env python3. New file nanopb_generator.py2 can be used to run with Python 2, if necessary.

Required actions: If possible, just verify Python 3 is installed and necessary dependencies are installed for it. For example pip3 install protobuf grpcio-tools should take care of it. If this is not possible, call nanopb_generator.py2 from your build scripts instead.

Error indications: python3: command not found if Python 3 is not installed. Could not import the Google protobuf Python libraries if dependencies are only installed for Python 2.

Nanopb-0.4.0 (2019-12-20)

New field descriptor format

Rationale: Previously information about struct fields was stored as an array of pb_field_t structures. This was a straightforward method, but required allocating space for e.g. submessage type and array size for all fields, even though most fields are not submessages nor arrays.

Changes: Now field information is encoded more efficiently in uint32_t array in a variable-length format. Old pb_field_t structure has been removed and it is now a typedef for pb_field_iter_t. This retains compatibility with most old callback definitions. The field definitions in .pb.h files are now of type pb_msgdesc_t.

Required actions: If your own code accesses the low-level field information in pb_field_t, it must be modified to do so only through the functions declared in pb_common.h.

Error indications: incompatible pointer type errors relating to pb_field_t

Changes to generator default options

Rationale: Previously nanopb_generator added a timestamp header to generated files and used only basename of files in #include directives. This is different than what the protoc C++ backend does.

Changes: Now default options are --no-timestamp and --no-strip-path.

Required actions: If old behaviour is desired, add --timestamp and --strip-path options to or on protoc command line as --nanopb_out=--timestamp,--strip-path:outdir.

Error indications: Compiler error: cannot find include file mymessage.pb.h when compiling mymessage.pb.c.

Removal of bundled plugin.proto

Rationale: Google's Python protobuf library, which is used in nanopb generator, has included plugin_pb2 with it since version 3.1.0. It is not necessary to bundle it with nanopb anymore.

Required actions: Update python-protobuf to version 3.1.0 or newer.

Error indications: ImportError: No module named compiler.plugin_pb2

.options file is now always case-sensitive

Rationale: Previously field names in .options file were case-sensitive on Linux and case-insensitive on Windows. This was by accident. Because .proto files are case-sensitive, .options files should be too.

Changes: Now field names in .options are always case-sensitive, and matched by fnmatchcase() instead of fnmatch().

Required actions: If field names in .options are not capitalized the same as in .proto, they must be updated.

CHAR_BIT define is now needed

Rationale: To check whether the platform has 8-bit or larger chars, the C standard CHAR_BIT macro is needed.

Changes: pb.h now includes limits.h for this macro.

Required actions: If your platform doesn't have limits.h available, you can define the macro in pb_syshdr.h. There is an example in extra directory.

Error indications: "Cannot find include file <limits.h>." or "Undefined identifier: CHAR_BIT."

Strings must now always be null-terminated

Rationale: Previously pb_encode() would accept non-terminated strings and assume that they are the full length of the defined array. However, pb_decode() would reject such messages because null terminator wouldn't fit in the array.

Changes: pb_encode() will now return an error if null terminator is missing. Maximum encoded message size calculation is changed accordingly so that at most max_size-1 strings are assumed. New field option max_length can be used to define the maximum string length, instead of the array size.

Required actions: If your strings were previously filling the whole allocated array, increase the size of the field by 1.

Error indications: pb_encode() returns error unterminated string.

Removal of per-field default value constants

Rationale: Previously nanopb declared a fieldname_default constant variable for each field with a default value, and used these internally to initialize messages. This however used unnecessarily large amount of storage for the values. The variables were mostly for internal usage, but were available in the header file.

Changes: Default values are now stored as an encoded protobuf message.

Required actions: If your code previously used default constants, it will have to be adapted to take the default value in some other way, such as by defining static const MyMessage msg_default = MyMessage_init_default; and accessing msg_default.fieldname.

Error indications: Compiler error about fieldname_default being undeclared.

Zero tag in message now raises error by default

Rationale: Previously nanopb has allowed messages to be terminated by a null byte, which is read as zero tag value. Most other protobuf implementations don't support this, so it is not very useful feature. It has also been noted that this can complicate debugging issues with corrupted messages.

Changes: pb_decode() now gives error when it encounters zero tag value. A new function pb_decode_ex() supports flag PB_DECODE_NULLTERMINATED that supports decoding null terminated messages.

Required actions: If application uses null termination for messages, switch it to use pb_decode_ex() and pb_encode_ex(). If compatibility with 0.3.9.x is needed, there are also pb_decode_nullterminated() and pb_encode_nullterminated() macros, which work both in 0.4.0 and 0.3.9.

Error indications: Error message from pb_decode(): zero_tag.

Submessages now have has_field in proto3 mode

Rationale: Previously nanopb considered proto3 submessages as present only when their contents was non-zero. Most other protobuf libraries allow explicit null state for submessages.

Changes: Submessages now have separate has_field in proto3 mode also.

Required actions: When using submessages in proto3 mode, user code must now set mymsg.has_submsg = true for each submessage that is present. Alternatively, the field option proto3_singular_msgs can be used to restore the old behavior.

Error indications: Submessages do not get encoded.

PB_OLD_CALLBACK_STYLE option has been removed

Rationale: Back in 2013, function signature for callbacks was changed. The PB_OLD_CALLBACK_STYLE option allowed compatibility with old code, but complicated code and testing because of the different options.

Changes: PB_OLD_CALLBACK_STYLE option no-longer has any effect.

Required actions: If PB_OLD_CALLBACK_STYLE option was in use previously, function signatures must be updated to use double pointers (void** and void * const *).

Error indications: Assignment from incompatible pointer type.

protoc insertion points are no longer included by default

Rationale: Protoc allows including comments in form @@protoc_insertion_point to identify locations for other plugins to insert their own extra content. Previously these were included by default, but they clutter the generated files and are rarely used.

Changes: Insertion points are now included only when --protoc-insertion-points option is passed to the generator.

Nanopb-, 0.4.0 (2019-10-13)

Fix generation of min/max defines for enum types

Rationale: Nanopb generator makes #defines for enum minimum and maximum value. Previously these defines incorrectly had the first and last enum value, instead of the actual minimum and maximum. (issue #405)

Changes: Minimum define now always has the smallest value, and maximum define always has the largest value.

Required actions: If these defines are used and enum values in .proto file are not defined in ascending order, user code behaviour may change. Check that user code doesn't expect the old, incorrect first/last behaviour.

Fix undefined behavior related to bool fields

Rationale: In C99, bool variables are not allowed to have other values than true and false. Compilers use this fact in optimization, and constructs like int foo = msg.has_field ? 100 : 0; will give unexpected results otherwise. Previously nanopb didn't enforce that decoded bool fields had valid values.

Changes: Bool fields are now handled separately as PB_LTYPE_BOOL. The LTYPE descriptor numbers for other field types were renumbered.

Required actions: Source code files must be recompiled, but regenerating .pb.h/.pb.c files from .proto is not required. If user code directly uses the nanopb internal field representation (search for PB_LTYPE_VARINT in source), it may need updating.

Nanopb-, 0.4.0 (2018-04-14)

Fix handling of string and bytes default values

Rationale: Previously nanopb didn't properly decode special character escapes like \200 emitted by protoc. This caused these escapes to end up verbatim in the default values in .pb.c file.

Changes: Escapes are now decoded, and e.g. \200 or \x80 results in {0x80} for bytes field and "\x80" for string field.

Required actions: If code has previously relied on \ in default value being passed through verbatim, it must now be changed to \\.

Nanopb-0.3.8 (2017-03-05)

Fully drain substreams before closing

Rationale: If the substream functions were called directly and the caller did not completely empty the substring before closing it, the parent stream would be put into an incorrect state.

Changes: pb_close_string_substream can now error and returns a boolean.

Required actions: Add error checking onto any call to pb_close_string_substream.

Change oneof format in .pb.c files

Rationale: Previously two oneofs in a single message would be erroneously handled as part of the same union.

Changes: Oneofs fields now use special PB_DATAOFFSET_UNION offset type in generated .pb.c files to distinguish whether they are the first or following field inside an union.

Required actions: Regenerate .pb.c/.pb.h files with new nanopb version if oneofs are used.

Nanopb-0.3.5 (2016-02-13)

Add support for platforms without uint8_t

Rationale: Some platforms cannot access 8-bit sized values directly, and do not define uint8_t. Nanopb previously didn't support these platforms.

Changes: References to uint8_t were replaced with several alternatives, one of them being a new pb_byte_t typedef. This in turn uses uint_least8_t which means the smallest available type.

Required actions: If your platform does not have a standards-compliant stdint.h, it may lack the definition for [u]int_least8_t. This must be added manually, example can be found in extra/pb_syshdr.h.

Error indications: Compiler error: "unknown type name 'uint_least8_t'".

Nanopb-0.3.2 (2015-01-24)

Add support for OneOfs

Rationale: Previously nanopb did not support the oneof construct in .proto files. Those fields were generated as regular optional fields.

Changes: OneOfs are now generated as C unions. Callback fields are not supported inside oneof and generator gives an error.

Required actions: The generator option no_unions can be used to restore old behaviour and to allow callbacks to be used. To use unions, one change is needed: use which_xxxx field to detect which field is present, instead of has_xxxx. Compare the value against MyStruct_myfield_tag.

Error indications: Generator error: "Callback fields inside of oneof are not supported". Compiler error: "Message" has no member named "has_xxxx".

Nanopb-0.3.0 (2014-08-26)

Separate field iterator logic to pb_common.c

Rationale: Originally, the field iteration logic was simple enough to be duplicated in pb_decode.c and pb_encode.c. New field types have made the logic more complex, which required the creation of a new file to contain the common functionality.

Changes: There is a new file, pb_common.c, which must be included in builds.

Required actions: Add pb_common.c to build rules. This file is always required. Either pb_decode.c or pb_encode.c can still be left out if some functionality is not needed.

Error indications: Linker error: undefined reference to pb_field_iter_begin, pb_field_iter_next or similar.

Change data type of field counts to pb_size_t

Rationale: Often nanopb is used with small arrays, such as 255 items or less. Using a full size_t field to store the array count wastes memory if there are many arrays. There already exists parameters PB_FIELD_16BIT and PB_FIELD_32BIT which tell nanopb what is the maximum size of arrays in use.

Changes: Generator will now use pb_size_t for the array _count fields. The size of the type will be controlled by the PB_FIELD_16BIT and PB_FIELD_32BIT compilation time options.

Required actions: Regenerate all .pb.h files. In some cases casts to the pb_size_t type may need to be added in the user code when accessing the _count fields.

Error indications: Incorrect data at runtime, crashes. But note that other changes in the same version already require regenerating the files and have better indications of errors, so this is only an issue for development versions.

Renamed some macros and identifiers

Rationale: Some names in nanopb core were badly chosen and conflicted with ISO C99 reserved names or lacked a prefix. While they haven't caused trouble so far, it is reasonable to switch to non-conflicting names as these are rarely used from user code.

Changes: The following identifier names have changed:

  • Macros:
    • UNUSED(x) -> PB_UNUSED(x)
  • Include guards:
    • PB_filename -> PB_filename_INCLUDED
  • Structure forward declaration tags:
    • _pb_field_t -> pb_field_s
    • _pb_bytes_array_t -> pb_bytes_array_s
    • _pb_callback_t -> pb_callback_s
    • _pb_extension_type_t -> pb_extension_type_s
    • _pb_extension_t -> pb_extension_s
    • _pb_istream_t -> pb_istream_s
    • _pb_ostream_t -> pb_ostream_s

Required actions: Regenerate all .pb.c files. If you use any of the above identifiers in your application code, perform search-replace to the new name.

Error indications: Compiler errors on lines with the macro/type names.

Nanopb-0.2.9 (2014-08-09)

Change semantics of generator -e option

Rationale: Some compilers do not accept filenames with two dots (like in default extension .pb.c). The -e option to the generator allowed changing the extension, but not skipping the extra dot.

Changes: The -e option in generator will no longer add the prepending dot. The default value has been adjusted accordingly to .pb.c to keep the default behaviour the same as before.

Required actions: Only if using the generator -e option. Add dot before the parameter value on the command line.

Error indications: File not found when trying to compile generated files.

Nanopb-0.2.7 (2014-04-07)

Changed pointer-type bytes field datatype

Rationale: In the initial pointer encoding support since nanopb-0.2.5, the bytes type used a separate pb_bytes_ptr_t type to represent bytes fields. This made it easy to encode data from a separate, user-allocated buffer. However, it made the internal logic more complex and was inconsistent with the other types.

Changes: Dynamically allocated bytes fields now have the pb_bytes_array_t type, just like statically allocated ones.

Required actions: Only if using pointer-type fields with the bytes datatype. Change any access to msg->field.size to msg->field->size. Change any allocation to reserve space of amount PB_BYTES_ARRAY_T_ALLOCSIZE(n). If the data pointer was begin assigned from external source, implement the field using a callback function instead.

Error indications: Compiler error: unknown type name pb_bytes_ptr_t.

Nanopb-0.2.4 (2013-11-07)

Remove the NANOPB_INTERNALS compilation option

Rationale: Having the option in the headers required the functions to be non-static, even if the option is not used. This caused errors on some static analysis tools.

Changes: The \#ifdef and associated functions were removed from the header.

Required actions: Only if the NANOPB_INTERNALS option was previously used. Actions are as listed under nanopb-0.1.3 and nanopb-0.1.6.

Error indications: Compiler warning: implicit declaration of function pb_dec_string, pb_enc_string, or similar.

Nanopb-0.2.1 (2013-04-14)

Callback function signature

Rationale: Previously the auxilary data to field callbacks was passed as void*. This allowed passing of any data, but made it unnecessarily complex to return a pointer from callback.

Changes: The callback function parameter was changed to void**.

Required actions: You can continue using the old callback style by defining PB_OLD_CALLBACK_STYLE. Recommended action is to:

  • Change the callback signatures to contain void** for decoders and void * const * for encoders.
  • Change the callback function body to use **arginstead ofarg`.

Error indications: Compiler warning: assignment from incompatible pointer type, when initializing funcs.encode or funcs.decode.

Nanopb-0.2.0 (2013-03-02)

Reformatted generated .pb.c file using macros

Rationale: Previously the generator made a list of C pb_field_t initializers in the .pb.c file. This led to a need to regenerate all .pb.c files after even small changes to the pb_field_t definition.

Changes: Macros were added to pb.h which allow for cleaner definition of the .pb.c contents. By changing the macro definitions, changes to the field structure are possible without breaking compatibility with old .pb.c files.

Required actions: Regenerate all .pb.c files from the .proto sources.

Error indications: Compiler warning: implicit declaration of function pb_delta_end.

Changed pb_type_t definitions

Rationale: The pb_type_t was previously an enumeration type. This caused warnings on some compilers when using bitwise operations to set flags inside the values.

Changes: The pb_type_t was changed to typedef uint8_t. The values were changed to #define. Some value names were changed for consistency.

Required actions: Only if you directly access the pb_field_t contents in your own code, something which is not usually done. Needed changes:


Error indications: Compiler error: PB_HTYPE_ARRAY or PB_HTYPE_CALLBACK undeclared.

Nanopb-0.1.6 (2012-09-02)

Refactored field decoder interface

Rationale: Similarly to field encoders in nanopb-0.1.3.

Changes: New functions with names pb_decode_* were added.

Required actions: By defining NANOPB_INTERNALS, you can still keep using the old functions. Recommended action is to replace any calls with the newer pb_decode_* equivalents.

Error indications: Compiler warning: implicit declaration of function pb_dec_string, pb_dec_varint, pb_dec_submessage or similar.

Nanopb-0.1.3 (2012-06-12)

Refactored field encoder interface

Rationale: The old pb_enc_* functions were designed mostly for the internal use by the core. Because they are internally accessed through function pointers, their signatures had to be common. This led to a confusing interface for external users.

Changes: New functions with names pb_encode_* were added. These have easier to use interfaces. The old functions are now only thin wrappers for the new interface.

Required actions: By defining NANOPB_INTERNALS, you can still keep using the old functions. Recommended action is to replace any calls with the newer pb_encode_* equivalents.

Error indications: Compiler warning: implicit declaration of function pb_enc_string, *pb_enc_varint,pb_enc_submessage\ or similar.