libwebp2: Upstream sync

Squashed commits:
d3f1ee14fd224fbd8e9c03bd6040bc0c02b58b21 Merge "Extend the bottom left context for angle predictors > 180°."
7c3bb5c9bcb28fb097dc75e9124aa29078e2419f Cleanup: Remove QuantStats + AOMContext
c2316eed92c63f70185b6e06d3a244cccd30adfa Merge "Cleanup: remove unused SourceStats, ..."
fc23f1af98b54a88562fb9731a1797ef8abcb5be Extend the bottom left context for angle predictors > 180°.
78ff01c3ff8ad2d7272c640b2fe94a8335f84a34 StringWriter: add some simple coverage
a42365951903b79a6f3dfe9f5e1d0652e8f27abf Cleanup: remove unused SourceStats, ...
aca76aae7001ae65166c997708cd65eec1317af8 Merge "BufferAdd: add SSE version"
0078cdc07971454db233966f89fb5eb4c5509905 BufferAdd: add SSE version
c0b434db03e5a898fa21030c72c457d0b31814c9 wp2: Add AnglePredictors around 225 degrees
f1299ad4c674d740d2685cdc66bfe262581adde9 PNGDec: raise malloc limit reasonably if needed

Change-Id: Icb9d10d40b3712f77546c6a4e2a76ee73650e8c3
Reviewed-by: Yannis Guyon <>
Tested-by: Yannis Guyon <>
Verified-Ubuntu: Yannis Guyon <>
44 files changed
tree: d728d23762099469e2fce3f4784d7919916a3bc9
  1. cmake/
  2. doc/
  3. examples/
  4. extras/
  5. imageio/
  6. kokoro/
  7. man/
  8. src/
  9. swig/
  10. tests/
  11. wp2_js/
  12. API.txt
  14. CMakeLists.txt
  15. codereview.settings
  18. Makefile
  20. README.wp2_js

WebP 2

WebP 2 is the successor of the WebP image format, currently in development. It is not ready for general use, and the format is not finalized so changes to the library can break compatibility with images encoded with previous versions. USE AT YOU OWN RISK!

This package contains the library that can be used in other programs to encode or decode Webp 2 images, as well as command line tools.

See for the first version of WebP .

What to expect?

The WebP 2 experimental codec is mostly pushing the features of WebP further in terms of compression efficiency. The new features (like 10b HDR support) are kept minimal. The axis of experimentation are:

  • more efficient lossy compression (~30% better than WebP, as close to AVIF as possible)
  • better visual degradation at very low bitrate
  • improved lossless compression
  • improved transparency compression
  • animation support
  • ultra-light previews
  • lightweight incremental decoding
  • small container overhead, tailored specifically for image compression
  • full 10bit architecture (HDR10)
  • strong focus on software implementation, fully multi-threaded

The use cases remain mostly the same as WebP: transfer over the wire, faster web, smaller apps, better user experience... WebP 2 is primarily tuned for the typical content available on the Web and Mobile apps: medium-range dimensions, transparency, short animations, thumbnails.

WebP2 is currently only partially optimized and, roughly speaking 5x slower than WebP for lossy compression. It still compresses 2x faster than AVIF, but takes 3x more time to decompress. The goal is to reach decompression speed parity.



A compiler (e.g., gcc 6+, clang 7+ or Microsoft Visual Studio 2017+ are recommended) and CMake.

On a Debian-like system the following should install everything you need for a minimal build:

$ sudo apt-get install build-essential cmake


$ mkdir build && cd build
$ cmake ..
$ make -j

Configuration options:

  • WP2_ENABLE_SIMD: enable any SIMD optimization.
  • WP2_ENABLE_BITTRACE: enable tracing.

For additional options see:

$ cmake .. -LH



cwp2 is a tool to encode images in webp2.


$ cwp2 in_file [options] [-o out_file]

Example for a single image:

$ cwp2 -q 70 input.png -o output.wp2

Example for an animation, with list of frames and durations in ms:

$ cwp2 -q 70 -f frame1.png 10 frame2.png 20 frame3.png 5 -o output.wp2

Important options:

FlagDefault valueDescription
-o <string>output file path
-q <float>75image quality factor [0=lossy : 100=lossless]*
-alpha_q <float>100alpha quality factor [0=lossy : 100=lossless]*
-effort <int>5compression effort [0=fast : 9=slower/better]
-f [<str> <int>]create an animation (alternate image, duration)

* The quality factor range corresponds to:

Quality factorMeaning
0Lossy compression, smallest file size and worst quality
...Lossy compression
95Lossy compression, biggest file size and best quality
96Near-lossless compression (maximum preprocessing)
...Near-lossless compression
99Near-lossless compression (minimum preprocessing)
100Lossless compression

Use cwp2 -h to see a full list of available options.


dwp2 is a tool to decode webp2 images.


$ dwp2 in_file [options] [-o out_file]

Use dwp2 -h to see a full list of available options.


vwp2 is a visual inspection and debugging tool. You need OpenGL and GLUT to build it.

Screenshot of vwp2

To open any image (jpeg, png, etc.) then compress it in WebP 2 and view the result:

$ vwp2 in_file...

vwp2 takes most of the same flags as cwp2, e.g. -q for quality. Encoding parameters can also be changed dynamically in the tool using key bindings.

Press h to a list of key bindings.

Use the top left menu or press v and shift+v to cycle between views.

Press i to show or hide info (note this hides the menu).

To view an already compressed file, use:

$ vwp2 -d path/to/image.wp2


rd_curve is a command-line tool for compressing images at multiple quality levels using different codecs (webp2, webp, jpeg, av1) to create rate-distortion curves (rd curves). An rd curve is a plot of distortion (difference between source and encoded image) vs bits per pixel, for different quality settings.

$ rd_curve [options] input_file

rd_curve takes most of the same flags as cwp2, e.g. -q for quality, -effort, and so on.

By default, only the webp2 codec is used. Use -webp, -jpeg or -av1 flags to add other codecs.

By default, results are printed as plain text on standard output.

With the -html flag, rd_curve outputs an html file. It also saves compressed images (turns on the -save option). Use the -save_folder option to set the directory where images are saved.

$ rd_curve input.png -webp -jpeg -av1 -html -save_folder $(pwd) > myfile.html


get_disto computes the difference between two images (typically the compressed file and the original file)

$ get_disto [options] compressed_file orig_file

get_disto outputs in order:

  • compressed file size
  • overall PSNR (or other metric, if specified through flags)
  • PSNR (or other metric) for A, R, G and B channels, in order
  • compressed file bits per pixel


Encoding API

Encoding functions are available in the header src/wp2/encode.h.

Encoding an image

#include "imageio/image_dec.h"
#include "src/wp2/base.h"
#include "src/wp2/encode.h"

WP2::ArgbBuffer input_buffer;
WP2Status status = WP2::ReadImage("path/to/image.png", &input_buffer);
if (status != WP2_STATUS_OK) { /* handle error */ }
WP2::EncoderConfig config;
config.quality = 70;
WP2::MemoryWriter writer;
status = WP2::Encode(input_buffer, &writer, config);
if (status != WP2_STATUS_OK) { /* handle error */ }
// do something with writer.mem_

Encoding an animation

#include "imageio/image_dec.h"
#include "src/wp2/base.h"
#include "src/wp2/encode.h"

WP2::ArgbBuffer frame1, frame2;
WP2Status status = WP2::ReadImage("path/to/frame1.png", &frame1);
if (status != WP2_STATUS_OK) { /* handle error */ }
status = WP2::ReadImage("path/to/frame2.png", &frame2);
if (status != WP2_STATUS_OK) { /* handle error */ }

WP2::AnimationEncoder encoder;
status = encoder.AddFrame(frame1, /*duration_ms=*/100);
if (status != WP2_STATUS_OK) { /* handle error */ }
status = encoder.AddFrame(frame2, /*duration_ms=*/50);
if (status != WP2_STATUS_OK) { /* handle error */ }

WP2::EncoderConfig config;
config.quality = 70;
WP2::MemoryWriter writer;
status = encoder.Encode(&writer, config, /*loop_count=*/1);
if (status != WP2_STATUS_OK) { /* handle error */ }
// do something with writer.mem_

Decoding API

Decoding functions are available in the header src/wp2/decode.h.

Simple decoding

This is mainly just one function to call:

#include "src/wp2/base.h"
#include "src/wp2/decode.h"

const std::string data = ...
WP2::ArgbBuffer output_buffer;
WP2Status status = WP2::Decode(data, &output_buffer);

If the file is a WebP 2 animation, output_buffer will contain the first frame.

Please have a look at the file src/wp2/decode.h for further details.

Animation decoding

To decode all the frames of an animation, the more advanced Decoder API can be used. See tests/ for common use cases.

WP2::ArrayDecoder decoder(data, data_size);
uint32_t duration_ms;
while (decoder.ReadFrame(&duration_ms))  {
  // A frame is ready. Use or copy its 'duration_ms' and 'decoder.GetPixels()'.
if (decoder.GetStatus() != WP2_STATUS_OK) { /* error */ }

Incremental decoding

If you want to start decoding before all the data is available, you can use the Decoder API. Use an WP2::ArrayDecoder if the data is stored in an array that progressively gets larger, with old bytes still available as new bytes come in. Use a WP2::StreamDecoder if data is streamed, with old bytes no longer available as new bytes come in. You can also subclass WP2::CustomDecoder to fit your needs. See tests/ for common use cases.

Below is an example with WP2::StreamDecoder.

WP2::StreamDecoder decoder;
while (/*additional data is available in some 'new_data[]' buffer*/) {
  decoder.AppendInput(new_data, new_data_size);
  while (decoder.ReadFrame()) {
    // ReadFrame() returns true when an entire frame is available
    // (a still image is considered as a single-frame animation).
    // The canvas is stored in GetPixels() till the next call to ReadFrame().

    // Use the whole GetPixels().
  if (decoder.Failed()) break;
  if (!decoder.GetDecodedArea().IsEmpty()) {
    // Use the partially GetDecodedArea() of GetPixels().
if (decoder.GetStatus() != WP2_STATUS_OK) { /* error */ }



Please report all bugs to the issue tracker:


See for details on how to submit patches.

One of the easiest ways to contribute is to report cases with compression artifacts or surprising output size. These ‘bad cases’ are very useful to help improve the compression library!

Please use the tracker to report such issues, making sure to include:

  • the version or revision used (using “git rev-parse HEAD” for instance)

  • the version of the compiler used (if you compiled your own version)

  • the problematic source image (will only be used for debugging and discarded afterward!)

  • the exact command line to use to reproduce the issue

  • the output file, if applicable.

Coding conventions and style

  • Code must follow the Google C++ style guide unless local style differs.

  • const is used for variables everywhere possible, including for pointers in function declarations. Input parameters use const references.

    void DoSomething(const Type1& const input, Type2* const out)
  • Do not use C++ exceptions.

  • Do not use std containers in the main library, e.g. no std::vector/set/map (but they can be used in tests). For vectors, use WP2::Vector instead.

  • Use uint32_t for sizes, width, height, loop indices, etc.

  • Most functions should return a WP2Status

Google Test Integration

A part of testing support is built using Google Test. To enable it the WP2_ENABLE_TESTS cmake variable must be turned on at cmake generation time (ON by default), and the GTEST_SOURCE_DIR cmake variable must be set to the path of the Google Test source directory (../googletest by default):

$ git clone path/to/googletest
$ cmake path/to/wp2 -DWP2_ENABLE_TESTS=ON -DGTEST_SOURCE_DIR=path/to/googletest

To run the tests you can use ctest after the build:

$ make
$ ctest