// Copyright 2014 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#include "device/serial/serial_io_handler_posix.h"

#include <sys/ioctl.h>
#include <termios.h>

#include "base/posix/eintr_wrapper.h"
#include "build/build_config.h"

#if defined(OS_LINUX)
#include <linux/serial.h>

// The definition of struct termios2 is copied from asm-generic/termbits.h
// because including that header directly conflicts with termios.h.
extern "C" {
struct termios2 {
  tcflag_t c_iflag;  // input mode flags
  tcflag_t c_oflag;  // output mode flags
  tcflag_t c_cflag;  // control mode flags
  tcflag_t c_lflag;  // local mode flags
  cc_t c_line;       // line discipline
  cc_t c_cc[19];     // control characters
  speed_t c_ispeed;  // input speed
  speed_t c_ospeed;  // output speed
};
}

#endif  // defined(OS_LINUX)

#if defined(OS_MACOSX)
#include <IOKit/serial/ioss.h>
#endif

namespace {

// Convert an integral bit rate to a nominal one. Returns |true|
// if the conversion was successful and |false| otherwise.
bool BitrateToSpeedConstant(int bitrate, speed_t* speed) {
#define BITRATE_TO_SPEED_CASE(x) \
  case x:                        \
    *speed = B##x;               \
    return true;
  switch (bitrate) {
    BITRATE_TO_SPEED_CASE(0)
    BITRATE_TO_SPEED_CASE(50)
    BITRATE_TO_SPEED_CASE(75)
    BITRATE_TO_SPEED_CASE(110)
    BITRATE_TO_SPEED_CASE(134)
    BITRATE_TO_SPEED_CASE(150)
    BITRATE_TO_SPEED_CASE(200)
    BITRATE_TO_SPEED_CASE(300)
    BITRATE_TO_SPEED_CASE(600)
    BITRATE_TO_SPEED_CASE(1200)
    BITRATE_TO_SPEED_CASE(1800)
    BITRATE_TO_SPEED_CASE(2400)
    BITRATE_TO_SPEED_CASE(4800)
    BITRATE_TO_SPEED_CASE(9600)
    BITRATE_TO_SPEED_CASE(19200)
    BITRATE_TO_SPEED_CASE(38400)
#if !defined(OS_MACOSX)
    BITRATE_TO_SPEED_CASE(57600)
    BITRATE_TO_SPEED_CASE(115200)
    BITRATE_TO_SPEED_CASE(230400)
    BITRATE_TO_SPEED_CASE(460800)
    BITRATE_TO_SPEED_CASE(576000)
    BITRATE_TO_SPEED_CASE(921600)
#endif
    default:
      return false;
  }
#undef BITRATE_TO_SPEED_CASE
}

#if !defined(OS_LINUX)
// Convert a known nominal speed into an integral bitrate. Returns |true|
// if the conversion was successful and |false| otherwise.
bool SpeedConstantToBitrate(speed_t speed, int* bitrate) {
#define SPEED_TO_BITRATE_CASE(x) \
  case B##x:                     \
    *bitrate = x;                \
    return true;
  switch (speed) {
    SPEED_TO_BITRATE_CASE(0)
    SPEED_TO_BITRATE_CASE(50)
    SPEED_TO_BITRATE_CASE(75)
    SPEED_TO_BITRATE_CASE(110)
    SPEED_TO_BITRATE_CASE(134)
    SPEED_TO_BITRATE_CASE(150)
    SPEED_TO_BITRATE_CASE(200)
    SPEED_TO_BITRATE_CASE(300)
    SPEED_TO_BITRATE_CASE(600)
    SPEED_TO_BITRATE_CASE(1200)
    SPEED_TO_BITRATE_CASE(1800)
    SPEED_TO_BITRATE_CASE(2400)
    SPEED_TO_BITRATE_CASE(4800)
    SPEED_TO_BITRATE_CASE(9600)
    SPEED_TO_BITRATE_CASE(19200)
    SPEED_TO_BITRATE_CASE(38400)
    default:
      return false;
  }
#undef SPEED_TO_BITRATE_CASE
}
#endif

}  // namespace

namespace device {

// static
scoped_refptr<SerialIoHandler> SerialIoHandler::Create(
    scoped_refptr<base::SingleThreadTaskRunner> file_thread_task_runner,
    scoped_refptr<base::SingleThreadTaskRunner> ui_thread_task_runner) {
  return new SerialIoHandlerPosix(file_thread_task_runner,
                                  ui_thread_task_runner);
}

void SerialIoHandlerPosix::ReadImpl() {
  DCHECK(CalledOnValidThread());
  DCHECK(pending_read_buffer());
  DCHECK(file().IsValid());

  // Try to read immediately. This is needed because on some platforms
  // (e.g., OSX) there may not be a notification from the message loop
  // when the fd is ready to read immediately after it is opened. There
  // is no danger of blocking because the fd is opened with async flag.
  AttemptRead(true);
}

void SerialIoHandlerPosix::WriteImpl() {
  DCHECK(CalledOnValidThread());
  DCHECK(pending_write_buffer());
  DCHECK(file().IsValid());

  EnsureWatchingWrites();
}

void SerialIoHandlerPosix::CancelReadImpl() {
  DCHECK(CalledOnValidThread());
  is_watching_reads_ = false;
  file_read_watcher_.StopWatchingFileDescriptor();
  QueueReadCompleted(0, read_cancel_reason());
}

void SerialIoHandlerPosix::CancelWriteImpl() {
  DCHECK(CalledOnValidThread());
  is_watching_writes_ = false;
  file_write_watcher_.StopWatchingFileDescriptor();
  QueueWriteCompleted(0, write_cancel_reason());
}

bool SerialIoHandlerPosix::ConfigurePortImpl() {
#if defined(OS_LINUX)
  struct termios2 config;
  if (ioctl(file().GetPlatformFile(), TCGETS2, &config) < 0) {
#else
  struct termios config;
  if (tcgetattr(file().GetPlatformFile(), &config) != 0) {
#endif
    VPLOG(1) << "Failed to get port configuration";
    return false;
  }

  // Set flags for 'raw' operation
  config.c_lflag &= ~(ICANON | ECHO | ECHOE | ECHONL | ISIG);
  config.c_iflag &= ~(IGNBRK | BRKINT | ISTRIP | INLCR | IGNCR | ICRNL | IXON);
  config.c_iflag |= PARMRK;
  config.c_oflag &= ~OPOST;

  // CLOCAL causes the system to disregard the DCD signal state.
  // CREAD enables reading from the port.
  config.c_cflag |= (CLOCAL | CREAD);

  DCHECK(options().bitrate);
  speed_t bitrate_opt = B0;
#if defined(OS_MACOSX)
  bool need_iossiospeed = false;
#endif
  if (BitrateToSpeedConstant(options().bitrate, &bitrate_opt)) {
#if defined(OS_LINUX)
    config.c_cflag &= ~CBAUD;
    config.c_cflag |= bitrate_opt;
#else
    cfsetispeed(&config, bitrate_opt);
    cfsetospeed(&config, bitrate_opt);
#endif
  } else {
    // Attempt to set a custom speed.
#if defined(OS_LINUX)
    config.c_cflag &= ~CBAUD;
    config.c_cflag |= CBAUDEX;
    config.c_ispeed = config.c_ospeed = options().bitrate;
#elif defined(OS_MACOSX)
    // cfsetispeed and cfsetospeed sometimes work for custom baud rates on OS
    // X but the IOSSIOSPEED ioctl is more reliable but has to be done after
    // the rest of the port parameters are set or else it will be overwritten.
    need_iossiospeed = true;
#else
    return false;
#endif
  }

  DCHECK(options().data_bits != serial::DataBits::NONE);
  config.c_cflag &= ~CSIZE;
  switch (options().data_bits) {
    case serial::DataBits::SEVEN:
      config.c_cflag |= CS7;
      break;
    case serial::DataBits::EIGHT:
    default:
      config.c_cflag |= CS8;
      break;
  }

  DCHECK(options().parity_bit != serial::ParityBit::NONE);
  switch (options().parity_bit) {
    case serial::ParityBit::EVEN:
      config.c_cflag |= PARENB;
      config.c_cflag &= ~PARODD;
      break;
    case serial::ParityBit::ODD:
      config.c_cflag |= (PARODD | PARENB);
      break;
    case serial::ParityBit::NO:
    default:
      config.c_cflag &= ~(PARODD | PARENB);
      break;
  }

  error_detect_state_ = ErrorDetectState::NO_ERROR;
  num_chars_stashed_ = 0;

  if (config.c_cflag & PARENB) {
    config.c_iflag &= ~IGNPAR;
    config.c_iflag |= INPCK;
    parity_check_enabled_ = true;
  } else {
    config.c_iflag |= IGNPAR;
    config.c_iflag &= ~INPCK;
    parity_check_enabled_ = false;
  }

  DCHECK(options().stop_bits != serial::StopBits::NONE);
  switch (options().stop_bits) {
    case serial::StopBits::TWO:
      config.c_cflag |= CSTOPB;
      break;
    case serial::StopBits::ONE:
    default:
      config.c_cflag &= ~CSTOPB;
      break;
  }

  DCHECK(options().has_cts_flow_control);
  if (options().cts_flow_control) {
    config.c_cflag |= CRTSCTS;
  } else {
    config.c_cflag &= ~CRTSCTS;
  }

#if defined(OS_LINUX)
  if (ioctl(file().GetPlatformFile(), TCSETS2, &config) < 0) {
#else
  if (tcsetattr(file().GetPlatformFile(), TCSANOW, &config) != 0) {
#endif
    VPLOG(1) << "Failed to set port attributes";
    return false;
  }

#if defined(OS_MACOSX)
  if (need_iossiospeed) {
    speed_t bitrate = options().bitrate;
    if (ioctl(file().GetPlatformFile(), IOSSIOSPEED, &bitrate) == -1) {
      VPLOG(1) << "Failed to set custom baud rate";
      return false;
    }
  }
#endif

  return true;
}

SerialIoHandlerPosix::SerialIoHandlerPosix(
    scoped_refptr<base::SingleThreadTaskRunner> file_thread_task_runner,
    scoped_refptr<base::SingleThreadTaskRunner> ui_thread_task_runner)
    : SerialIoHandler(file_thread_task_runner, ui_thread_task_runner),
      is_watching_reads_(false),
      is_watching_writes_(false) {
}

SerialIoHandlerPosix::~SerialIoHandlerPosix() {
}

void SerialIoHandlerPosix::OnFileCanReadWithoutBlocking(int fd) {
  DCHECK(CalledOnValidThread());
  DCHECK_EQ(fd, file().GetPlatformFile());

  AttemptRead(false);
}

bool SerialIoHandlerPosix::AttemptRead(bool within_read) {
  if (pending_read_buffer()) {
    int bytes_read = HANDLE_EINTR(read(file().GetPlatformFile(),
                                       pending_read_buffer(),
                                       pending_read_buffer_len()));
    if (bytes_read < 0) {
      if (errno == EAGAIN) {
        // The fd does not have data to read yet so continue waiting.
        EnsureWatchingReads();
      } else if (errno == ENXIO) {
        RunReadCompleted(within_read, 0, serial::ReceiveError::DEVICE_LOST);
      } else {
        RunReadCompleted(within_read, 0, serial::ReceiveError::SYSTEM_ERROR);
      }
    } else if (bytes_read == 0) {
      RunReadCompleted(within_read, 0, serial::ReceiveError::DEVICE_LOST);
    } else {
      bool break_detected = false;
      bool parity_error_detected = false;
      int new_bytes_read =
          CheckReceiveError(pending_read_buffer(), pending_read_buffer_len(),
                            bytes_read, break_detected, parity_error_detected);

      if (break_detected) {
        RunReadCompleted(within_read, new_bytes_read,
                         serial::ReceiveError::BREAK);
      } else if (parity_error_detected) {
        RunReadCompleted(within_read, new_bytes_read,
                         serial::ReceiveError::PARITY_ERROR);
      } else {
        RunReadCompleted(within_read, new_bytes_read,
                         serial::ReceiveError::NONE);
      }
    }
  } else {
    // Stop watching the fd if we get notifications with no pending
    // reads or writes to avoid starving the message loop.
    is_watching_reads_ = false;
    file_read_watcher_.StopWatchingFileDescriptor();
  }

  return true;
}

void SerialIoHandlerPosix::RunReadCompleted(bool within_read,
                                            int bytes_read,
                                            serial::ReceiveError error) {
  if (within_read) {
    // Stop watching the fd to avoid more reads until the queued ReadCompleted()
    // completes and releases the pending_read_buffer.
    is_watching_reads_ = false;
    file_read_watcher_.StopWatchingFileDescriptor();

    QueueReadCompleted(bytes_read, error);
  } else {
    ReadCompleted(bytes_read, error);
  }
}

void SerialIoHandlerPosix::OnFileCanWriteWithoutBlocking(int fd) {
  DCHECK(CalledOnValidThread());
  DCHECK_EQ(fd, file().GetPlatformFile());

  if (pending_write_buffer()) {
    int bytes_written = HANDLE_EINTR(write(file().GetPlatformFile(),
                                           pending_write_buffer(),
                                           pending_write_buffer_len()));
    if (bytes_written < 0) {
      WriteCompleted(0, serial::SendError::SYSTEM_ERROR);
    } else {
      WriteCompleted(bytes_written, serial::SendError::NONE);
    }
  } else {
    // Stop watching the fd if we get notifications with no pending
    // writes to avoid starving the message loop.
    is_watching_writes_ = false;
    file_write_watcher_.StopWatchingFileDescriptor();
  }
}

void SerialIoHandlerPosix::EnsureWatchingReads() {
  DCHECK(CalledOnValidThread());
  DCHECK(file().IsValid());
  if (!is_watching_reads_) {
    is_watching_reads_ = base::MessageLoopForIO::current()->WatchFileDescriptor(
        file().GetPlatformFile(),
        true,
        base::MessageLoopForIO::WATCH_READ,
        &file_read_watcher_,
        this);
  }
}

void SerialIoHandlerPosix::EnsureWatchingWrites() {
  DCHECK(CalledOnValidThread());
  DCHECK(file().IsValid());
  if (!is_watching_writes_) {
    is_watching_writes_ =
        base::MessageLoopForIO::current()->WatchFileDescriptor(
            file().GetPlatformFile(),
            true,
            base::MessageLoopForIO::WATCH_WRITE,
            &file_write_watcher_,
            this);
  }
}

bool SerialIoHandlerPosix::Flush() const {
  if (tcflush(file().GetPlatformFile(), TCIOFLUSH) != 0) {
    VPLOG(1) << "Failed to flush port";
    return false;
  }
  return true;
}

serial::DeviceControlSignalsPtr SerialIoHandlerPosix::GetControlSignals()
    const {
  int status;
  if (ioctl(file().GetPlatformFile(), TIOCMGET, &status) == -1) {
    VPLOG(1) << "Failed to get port control signals";
    return serial::DeviceControlSignalsPtr();
  }

  serial::DeviceControlSignalsPtr signals(serial::DeviceControlSignals::New());
  signals->dcd = (status & TIOCM_CAR) != 0;
  signals->cts = (status & TIOCM_CTS) != 0;
  signals->dsr = (status & TIOCM_DSR) != 0;
  signals->ri = (status & TIOCM_RI) != 0;
  return signals;
}

bool SerialIoHandlerPosix::SetControlSignals(
    const serial::HostControlSignals& signals) {
  int status;

  if (ioctl(file().GetPlatformFile(), TIOCMGET, &status) == -1) {
    VPLOG(1) << "Failed to get port control signals";
    return false;
  }

  if (signals.has_dtr) {
    if (signals.dtr) {
      status |= TIOCM_DTR;
    } else {
      status &= ~TIOCM_DTR;
    }
  }

  if (signals.has_rts) {
    if (signals.rts) {
      status |= TIOCM_RTS;
    } else {
      status &= ~TIOCM_RTS;
    }
  }

  if (ioctl(file().GetPlatformFile(), TIOCMSET, &status) != 0) {
    VPLOG(1) << "Failed to set port control signals";
    return false;
  }
  return true;
}

serial::ConnectionInfoPtr SerialIoHandlerPosix::GetPortInfo() const {
#if defined(OS_LINUX)
  struct termios2 config;
  if (ioctl(file().GetPlatformFile(), TCGETS2, &config) < 0) {
#else
  struct termios config;
  if (tcgetattr(file().GetPlatformFile(), &config) == -1) {
#endif
    VPLOG(1) << "Failed to get port info";
    return serial::ConnectionInfoPtr();
  }

  serial::ConnectionInfoPtr info(serial::ConnectionInfo::New());
#if defined(OS_LINUX)
  // Linux forces c_ospeed to contain the correct value, which is nice.
  info->bitrate = config.c_ospeed;
#else
  speed_t ispeed = cfgetispeed(&config);
  speed_t ospeed = cfgetospeed(&config);
  if (ispeed == ospeed) {
    int bitrate = 0;
    if (SpeedConstantToBitrate(ispeed, &bitrate)) {
      info->bitrate = bitrate;
    } else if (ispeed > 0) {
      info->bitrate = static_cast<int>(ispeed);
    }
  }
#endif

  if ((config.c_cflag & CSIZE) == CS7) {
    info->data_bits = serial::DataBits::SEVEN;
  } else if ((config.c_cflag & CSIZE) == CS8) {
    info->data_bits = serial::DataBits::EIGHT;
  } else {
    info->data_bits = serial::DataBits::NONE;
  }
  if (config.c_cflag & PARENB) {
    info->parity_bit = (config.c_cflag & PARODD) ? serial::ParityBit::ODD
                                                 : serial::ParityBit::EVEN;
  } else {
    info->parity_bit = serial::ParityBit::NO;
  }
  info->stop_bits =
      (config.c_cflag & CSTOPB) ? serial::StopBits::TWO : serial::StopBits::ONE;
  info->cts_flow_control = (config.c_cflag & CRTSCTS) != 0;
  return info;
}

bool SerialIoHandlerPosix::SetBreak() {
  if (ioctl(file().GetPlatformFile(), TIOCSBRK, 0) != 0) {
    VPLOG(1) << "Failed to set break";
    return false;
  }

  return true;
}

bool SerialIoHandlerPosix::ClearBreak() {
  if (ioctl(file().GetPlatformFile(), TIOCCBRK, 0) != 0) {
    VPLOG(1) << "Failed to clear break";
    return false;
  }
  return true;
}

// break sequence:
// '\377'       -->        ErrorDetectState::MARK_377_SEEN
// '\0'         -->          ErrorDetectState::MARK_0_SEEN
// '\0'         -->                         break detected
//
// parity error sequence:
// '\377'       -->        ErrorDetectState::MARK_377_SEEN
// '\0'         -->          ErrorDetectState::MARK_0_SEEN
// character with parity error  -->  parity error detected
//
// break/parity error sequences are removed from the byte stream
// '\377' '\377' sequence is replaced with '\377'
int SerialIoHandlerPosix::CheckReceiveError(char* buffer,
                                            int buffer_len,
                                            int bytes_read,
                                            bool& break_detected,
                                            bool& parity_error_detected) {
  int new_bytes_read = num_chars_stashed_;
  DCHECK_LE(new_bytes_read, 2);

  for (int i = 0; i < bytes_read; ++i) {
    char ch = buffer[i];
    if (new_bytes_read == 0) {
      chars_stashed_[0] = ch;
    } else if (new_bytes_read == 1) {
      chars_stashed_[1] = ch;
    } else {
      buffer[new_bytes_read - 2] = ch;
    }
    ++new_bytes_read;
    switch (error_detect_state_) {
      case ErrorDetectState::NO_ERROR:
        if (ch == '\377') {
          error_detect_state_ = ErrorDetectState::MARK_377_SEEN;
        }
        break;
      case ErrorDetectState::MARK_377_SEEN:
        DCHECK_GE(new_bytes_read, 2);
        if (ch == '\0') {
          error_detect_state_ = ErrorDetectState::MARK_0_SEEN;
        } else {
          if (ch == '\377') {
            // receive two bytes '\377' '\377', since ISTRIP is not set and
            // PARMRK is set, a valid byte '\377' is passed to the program as
            // two bytes, '\377' '\377'. Replace these two bytes with one byte
            // of '\377', and set error_detect_state_ back to
            // ErrorDetectState::NO_ERROR.
            --new_bytes_read;
          }
          error_detect_state_ = ErrorDetectState::NO_ERROR;
        }
        break;
      case ErrorDetectState::MARK_0_SEEN:
        DCHECK_GE(new_bytes_read, 3);
        if (ch == '\0') {
          break_detected = true;
          new_bytes_read -= 3;
          error_detect_state_ = ErrorDetectState::NO_ERROR;
        } else {
          if (parity_check_enabled_) {
            parity_error_detected = true;
            new_bytes_read -= 3;
            error_detect_state_ = ErrorDetectState::NO_ERROR;
          } else if (ch == '\377') {
            error_detect_state_ = ErrorDetectState::MARK_377_SEEN;
          } else {
            error_detect_state_ = ErrorDetectState::NO_ERROR;
          }
        }
        break;
    }
  }
  // Now new_bytes_read bytes should be returned to the caller (including the
  // previously stashed characters that were stored at chars_stashed_[]) and are
  // now stored at: chars_stashed_[0], chars_stashed_[1], buffer[...].

  // Stash up to 2 characters that are potentially part of a break/parity error
  // sequence. The buffer may also not be large enough to store all the bytes.
  // tmp[] stores the characters that need to be stashed for this read.
  char tmp[2];
  num_chars_stashed_ = 0;
  if (error_detect_state_ == ErrorDetectState::MARK_0_SEEN ||
      new_bytes_read - buffer_len == 2) {
    // need to stash the last two characters
    if (new_bytes_read == 2) {
      memcpy(tmp, chars_stashed_, new_bytes_read);
    } else {
      if (new_bytes_read == 3) {
        tmp[0] = chars_stashed_[1];
      } else {
        tmp[0] = buffer[new_bytes_read - 4];
      }
      tmp[1] = buffer[new_bytes_read - 3];
    }
    num_chars_stashed_ = 2;
  } else if (error_detect_state_ == ErrorDetectState::MARK_377_SEEN ||
             new_bytes_read - buffer_len == 1) {
    // need to stash the last character
    if (new_bytes_read <= 2) {
      tmp[0] = chars_stashed_[new_bytes_read - 1];
    } else {
      tmp[0] = buffer[new_bytes_read - 3];
    }
    num_chars_stashed_ = 1;
  }

  new_bytes_read -= num_chars_stashed_;
  if (new_bytes_read > 2) {
    // right shift two bytes to store bytes from chars_stashed_[]
    memmove(buffer + 2, buffer, new_bytes_read - 2);
  }
  memcpy(buffer, chars_stashed_, std::min(new_bytes_read, 2));
  memcpy(chars_stashed_, tmp, num_chars_stashed_);
  return new_bytes_read;
}

std::string SerialIoHandler::MaybeFixUpPortName(const std::string& port_name) {
  return port_name;
}

}  // namespace device