| # ********************************************************** |
| # Copyright (c) 2008 VMware, Inc. All rights reserved. |
| # ********************************************************** |
| |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are met: |
| # |
| # * Redistributions of source code must retain the above copyright notice, |
| # this list of conditions and the following disclaimer. |
| # |
| # * Redistributions in binary form must reproduce the above copyright notice, |
| # this list of conditions and the following disclaimer in the documentation |
| # and/or other materials provided with the distribution. |
| # |
| # * Neither the name of VMware, Inc. nor the names of its contributors may be |
| # used to endorse or promote products derived from this software without |
| # specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| # ARE DISCLAIMED. IN NO EVENT SHALL VMWARE, INC. OR CONTRIBUTORS BE LIABLE |
| # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| # SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| # CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH |
| # DAMAGE. |
| |
| |
| ### os-specific cases that are appended to the long run |
| @windows_cases = ( |
| # PR 234665: 64-bit debug build |
| "BUILD::ARCH=x64", |
| ### Following two runs don't build on windows (though we continue to build them on linux) |
| ### FIXME : if we get these working again move them from the os_specific cases to the |
| ### common cases |
| ##"BUILD::ADD_DEFINES=\"${D}CHECK_RETURNS_SSE2\"", |
| ### strace, no run |
| "BUILD::DEBUG=1 INTERNAL=1 STRACE_CLIENT=1", |
| ### no longer actively supported |
| ### test building linked to libc |
| ## "BUILD::DEBUG=1 INTERNAL=1 NOLIBC=0", |
| ## "ONLY::spec::DYNAMORIO_OPTIONS=\\\"-loglevel 1 -protect_mask 0\\\" RUNALL_SLEEP=5s", |
| ); |
| |
| @linux_cases = ( |
| ### the following run doesn't build on windows, move back to common once they are fixed up |
| "BUILD::ADD_DEFINES=\"${D}CHECK_RETURNS_SSE2\"", |
| ### FIXME: Move this to common_cases below once the client interface tests |
| ### are working with Linux. xref case 5412. |
| "BUILD::CLIENT_INTERFACE=1", |
| "DYNAMORIO_OPTIONS=\\\"\\\"", |
| ); |
| |
| ### These will be run with both release and debug builds |
| ### and on both Linux and Windows |
| @common_product_runs = ( |
| "DYNAMORIO_OPTIONS=\\\"-code_api\\\"", |
| "ONLY::runnointerface::DYNAMORIO_OPTIONS=\\\"\\\"", |
| "ONLY::runnointerface::DYNAMORIO_OPTIONS=\\\"-security -liveshields\\\"", |
| # options exposed to users |
| "DYNAMORIO_OPTIONS=\\\"-thread_private\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-disable_traces\\\"", |
| # put disabled-from-short test runs here to keep early in email |
| "ONLY::runall/earlythread.runrunall security-win32/selfmod-threads.runinjector::DYNAMORIO_OPTIONS=\\\"\\\"", |
| # security option tests: |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -no_executable_if_alloc\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -no_executable_if_trampoline\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -no_executable_if_hook\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -no_executable_if_rx_text -no_coarse_merge_iat\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -executable_if_text\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -executable_if_x\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -X\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -no_ret_after_call\\\"", |
| # or its synonym |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -C\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -no_seh_rct\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -pushregret_rct\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -xdata_rct\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -executable_heap\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -executable_stack\\\"", |
| # RCT policies |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -rct_ind_call 11 -rct_ind_jump 11\\\"", |
| # don't block, just OPTION_ENABLED|OPTION_REPORT |
| # or don't report, just block, just OPTION_ENABLED|OPTION_BLOCK |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -rct_ind_call 9 -rct_ind_jump 3\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -rct_ind_call 3 -rct_ind_jump 9\\\"", |
| # disabled using the alias to -rct_ind_call 0 -rct_ind_jump 0 |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -E -F\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -rct_cache_exempt 0\\\"", # default 1 |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -rct_section_type 0xe0\\\"", # default 0x20 |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -detect_mode -rct_cache_exempt 2\\\"", |
| # coarse units |
| "DYNAMORIO_OPTIONS=\\\"-no_shared_traces\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-no_coarse_units\\\"", |
| # make sure we continue to support both shared and non-shared cache |
| "DYNAMORIO_OPTIONS=\\\"-no_coarse_units -no_shared_traces\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-no_coarse_units -no_shared_bbs\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-no_coarse_units -no_shared_traces -no_shared_bbs\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-no_coarse_units -shared_bbs_only\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-inline_trace_ibl\\\"", |
| # attack handling tests |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -kill_thread\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -throw_exception\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -throw_exception -kill_thread\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -throw_exception -throw_exception_max 1\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -kill_thread -kill_thread_max 1\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -kill_thread -kill_thread_max 1 -throw_exception -throw_exception_max 1\\\"", |
| # adaptive working set is part of default build now |
| # We specify "runsecurity" to get our weirder tests, some w/ multiple threads |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-cache_bb_regen 1\\\"", |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-cache_trace_regen 1\\\"", |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-finite_shared_bb_cache -cache_shared_bb_regen 80\\\"", |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-finite_shared_trace_cache -cache_shared_trace_regen 80\\\"", |
| # reverse of the default options |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-no_guard_pages\\\"", |
| # see case 7813 for why nativeterminate test is problematic with |
| # -native_exec (default) and -no_native_exec_syscalls |
| # FIXME - we should have an ADD_DISABLED or something like that so |
| # that we can have default disabled tests as well |
| # on win2k -native_exec_syscalls is required for on by default |
| # -early_inject when the process itself wasn't early_injected into |
| "ONLY::DISABLED_WIN32=\"| grep -v nativeterminate\" all::DYNAMORIO_OPTIONS=\\\"-no_native_exec_syscalls -no_early_inject\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-native_exec\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-hot_patching\\\"", |
| # shared IBT tables |
| "DYNAMORIO_OPTIONS=\\\"-shared_trace_ibt_tables\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-disable_traces -shared_bb_ibt_tables\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-shared_trace_ibt_tables -no_ref_count_shared_ibt_tables\\\"", |
| # IAT conversion |
| "DYNAMORIO_OPTIONS=\\\"-IAT_convert\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-no_coarse_units -IAT_convert -IAT_elide\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-no_coarse_units -IAT_convert -IAT_elide -max_elide_jmp 1 -max_elide_call 1\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-max_elide_jmp 1 -max_elide_call 1\\\"", |
| # patch proof - prevent hooking of targeted victim modules |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-patch_proof_default_list secur32.dll -patch_proof_list 'kernel32.dll'\\\"", |
| # patch proof - blanket protect policy |
| # FIXME: case 6635 0) 'kernel32.dll;advapi32.dll' |
| # FIXME: case 6635 2) gen_expect should use subst to match * here |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-patch_proof_list '*=ALL'\\\"", |
| # case 6640 |
| "DYNAMORIO_OPTIONS=\\\"-remove_trace_components\\\"", |
| # case 147 - BB2BB IBL w/trace building |
| "DYNAMORIO_OPTIONS=\\\"-no_coarse_units -bb_ibl_targets\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-no_coarse_units -bb_ibl_targets -shared_trace_ibt_tables\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-no_coarse_units -bb_ibl_targets -bb_single_restore_prefix\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-no_coarse_units -bb_ibl_targets -bb_ibt_table_includes_traces\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-no_coarse_units -bb_ibl_targets -bb_ibt_table_includes_traces -bb_single_restore_prefix -trace_single_restore_prefix\\\"", |
| # Test smaller prefixes on traces |
| "DYNAMORIO_OPTIONS=\\\"-trace_single_restore_prefix\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-ro2sandbox_threshold 1\\\"", |
| # -sandbox2ro_threshold 1 isn't allowed, 2 is lowest |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-sandbox2ro_threshold 2\\\"", |
| # stress the pad_jmps code |
| "DYNAMORIO_OPTIONS=\\\"-pad_jmps_set_alignment 8 -enable_traces -no_coarse_units\\\"", |
| ); |
| |
| @release_runs = ( |
| "SHORT::ONLY::runinterface::DYNAMORIO_OPTIONS=\\\"-code_api -probe_api\\\"", |
| "SHORT::ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -detect_mode -report_max 0 -no_diagnostics\\\"", |
| "SHORT::ONLY::runrunall::DYNAMORIO_OPTIONS=\\\"-probe_api -hotp_only\\\"", |
| # test running out of our memory reservation |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-vm_size 2M -reset_at_vmm_percent_free_limit 0\\\"", |
| ); |
| |
| ### These will be run with debug builds on both Linux and Windows |
| @common_debug_runs = ( |
| # runallbuthotp is to handle PR 234043 |
| "SHORT::ONLY::spec runallbuthotp::DYNAMORIO_OPTIONS=\\\"-code_api -probe_api\\\"", |
| "SHORT::ONLY::runos runsecurity runrunall::DYNAMORIO_OPTIONS=\\\"-security\\\"", |
| "SHORT::ONLY::runrunall::DYNAMORIO_OPTIONS=\\\"-desktop\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-loglevel 1\\\" RUNALL_SLEEP=5s", |
| # test running out of our memory reservation |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-vm_size 2M -reset_at_vmm_percent_free_limit 0 -skip_out_of_vm_reserve_curiosity\\\"", |
| #IBLs |
| # no traces, or lots of traces |
| # FIXME Re-activate the test below using -no_link_ibl instead |
| # of -no_ibl_shared_bb after the former option has been |
| # implemented (case 5182). |
| # "DYNAMORIO_OPTIONS=\\\"-shared_bbs -disable_traces -no_ibl_table_per_type -no_ibl_shared_bb\\\" TEST_MINS=15", |
| "DYNAMORIO_OPTIONS=\\\"-no_coarse_units -no_shared_bbs -disable_traces\\\" TEST_MINS=15", |
| "ONLY::runcommon::DYNAMORIO_OPTIONS=\\\"-disable_traces -no_bb_ibl_targets\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-trace_threshold 1\\\"", |
| # no inlining, or inline both bbs and traces |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-atomic_inlined_linking -no_shared_traces\\\"", |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-no_inline_trace_ibl -no_shared_traces\\\"", |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-no_coarse_units -inline_bb_ibl -atomic_inlined_linking\\\"", |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-no_coarse_units -inline_bb_ibl -atomic_inlined_linking -no_shared_bbs\\\"", |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-no_coarse_units -inline_trace_ibl -inline_bb_ibl -atomic_inlined_linking\\\"", |
| # for max cache sizes, here are max usage for test runs of spec: |
| # bb (KB) trace (KB) |
| # -------- ---------- |
| # crafty 521 356 |
| # eon 642-649 200-216 |
| # gcc 2967 2149 |
| # perlbmk 290-635 19-146 |
| # mcf 115 43 |
| # 64KB bb max ends up taking 10 minutes for single gcc run! |
| # Min cache max of 4 takes A LONG TIME -> disabled for default run |
| # Instead of min of 4 we do something intermediate. |
| # We specify "runsecurity" to get our weirder tests, some w/ multiple threads |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-cache_bb_max 128\\\" TEST_MINS=30", |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-cache_trace_max 128\\\" TEST_MINS=30", |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-no_elide_back_jmps\\\"", |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-no_elide_back_calls\\\"", |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-no_free_private_stubs\\\"", |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-no_separate_private_stubs -no_free_private_stubs\\\"", |
| "ONLY::spec runsecurity::DYNAMORIO_OPTIONS=\\\"-no_separate_shared_stubs\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-no_hashtable_ibl_stats\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-unsafe_ignore_overflow\\\"", |
| # common/{ops,conflict,eflags} are all expected to fail |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-unsafe_ignore_eflags\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-unsafe_ignore_eflags_trace\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-unsafe_ignore_eflags_prefix\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-unsafe_ignore_eflags_ibl -unsafe_ignore_eflags_prefix\\\"", |
| # debugging aids |
| "DYNAMORIO_OPTIONS=\\\"-detect_dangling_fcache\\\"", |
| # cache alignment: debug-only since -no_pad_jmps_shift_trace is an internal op |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-cache_trace_align 1 -no_pad_jmps_shift_trace\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-cache_trace_align 16 -no_pad_jmps_shift_trace\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-cache_bb_align 16\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-no_pad_jmps_shift_trace\\\"", |
| # internal-only options (for now) |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-safe_translate_flushed\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-no_coarse_units -store_translations\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-no_coarse_units -no_indirect_stubs -C -E -F\\\"", |
| # we're now using tracedump for perf analysis independently of -prof_counts |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-prof_pcs -gendump -tracedump_binary\\\" TEST_MINS=20 RUNALL_SLEEP=15s", |
| ); |
| |
| if ($on_linux) { |
| @product_runs = ( @common_product_runs, |
| #no linux specific product runs right now |
| ); |
| @debug_runs = ( @common_debug_runs, |
| # prof_pcs is an internal option on linux right now |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-prof_pcs\\\"", |
| ); |
| } else { |
| # WIN32 specific runs |
| @product_runs = ( @common_product_runs, |
| # all product configurations that may prevent a succesful boot should be run in SHORT |
| "ONLY::runnointerface::DYNAMORIO_OPTIONS=\\\"-probe_api -hotp_only\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-desktop\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -detect_mode -report_max 0 -no_diagnostics\\\"", |
| "ONLY::runnointerface::DYNAMORIO_OPTIONS=\\\"-client\\\"",# explorer.exe and desktop apps |
| "ONLY::runnointerface::DYNAMORIO_OPTIONS=\\\"-client -aslr_cache 0\\\"", # winlogon, spoolsv run in this |
| "ONLY::runnointerface::DYNAMORIO_OPTIONS=\\\"-thin_client\\\"", |
| # pcache tests: per-user so each app will merge w/ previous, plus merge |
| # w/ at-unload persists from earlier -desktop run |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-desktop -coarse_freeze_at_exit\\\"", |
| # run again so each must use the merged pcaches |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-desktop -coarse_freeze_at_exit\\\"", |
| # Test with -use_moduledb relaxations, (is on by default, but tests Makefile |
| # adds -staged which turns it off, we re-enable by turning the option back on). |
| # The tests Makefile adds different version resource information to different |
| # tests in runall/ and security-{common,win32}/ to fully exercise this. |
| "DYNAMORIO_OPTIONS=\\\"-security -use_moduledb\\\"", |
| "ONLY::runnointerface::DYNAMORIO_OPTIONS=\\\"-security -client\\\"", |
| "ONLY::runnointerface::DYNAMORIO_OPTIONS=\\\"-security -client -medium\\\"", |
| "ONLY::runnointerface::DYNAMORIO_OPTIONS=\\\"-security -low\\\"", # not a default config |
| |
| # FIXME - next 2 runs temporary for new 4.2 features |
| "ONLY::runos::DYNAMORIO_OPTIONS=\\\"-suspend_on_synch_failure_for_app_suspend -synch_thread_sleep_MP -synch_thread_max_loops 1500 -synch_all_threads_max_loops 3000\\\"", |
| "ONLY::runos::DYNAMORIO_OPTIONS=\\\"-synch_thread_max_loops 0xffffffff\\\"", |
| # self-protection: FIXME: once case 8023 re-enables on linux, move to |
| # common_product_runs list |
| "DYNAMORIO_OPTIONS=\\\"-security -protect_mask 0\\\"", # no options |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-security -protect_mask 2\\\" TEST_MINS=8", # .fspdata only |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-security -protect_mask 0x103\\\" TEST_MINS=8", # .data, .fspdata, gencode |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-security -protect_mask 0x107\\\" TEST_MINS=8", # .data, .fspdata, .cspdata, gencode |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-security -protect_mask 8\\\" TEST_MINS=8", # global heap |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-security -protect_mask 0x10f\\\" TEST_MINS=8", # global heap, all data sections, gencode |
| "DYNAMORIO_OPTIONS=\\\"-no_shared_syscalls\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-security -no_pad_jmps\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -no_executable_if_flush\\\"", |
| # there is an overlap, so combination should be tested |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -executable_after_load -no_executable_if_rx_text -no_coarse_merge_iat\\\"", |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -no_executable_if_hook -executable_if_text\\\"", |
| # reverse of the default options |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-ignore_syscalls\\\"", |
| # test internal detach, mainly looking for asserts or |
| # exceptions/hangs as we don't verify that we really |
| # detach, FIXME verify somehow |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -internal_detach_mask 0x1\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-no_hide\\\"", |
| # test sygate compatibility |
| "DYNAMORIO_OPTIONS=\\\"-security -sygate\\\"", |
| # reset |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-no_enable_reset\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-reset_at_nth_thread 2\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-reset_every_nth_pending 2\\\"", |
| # we have to target LCD here -- gcc gets pretty slow if go lower |
| # than these, but most apps won't reset at all, so we only run spec |
| "ONLY::spec::DYNAMORIO_OPTIONS=\\\"-reset_at_nth_bb_unit 22\\\"", |
| "ONLY::spec::DYNAMORIO_OPTIONS=\\\"-reset_at_nth_trace_unit 15\\\"", |
| # profiling |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-prof_pcs\\\"", |
| # ASLR - DLLs |
| "ONLY::runnointerface::DYNAMORIO_OPTIONS=\\\"-security -aslr 0x7 -hotp_only\\\"", # non-shared |
| "DYNAMORIO_OPTIONS=\\\"-security -aslr 0x7\\\"", # DLL + heap + stack |
| "DYNAMORIO_OPTIONS=\\\"-security -aslr 0x1\\\"", # only DLL |
| "DYNAMORIO_OPTIONS=\\\"-security -aslr 0x4\\\"", # only heap pad |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -aslr 0x3\\\"", # DLL + parent stack |
| "DYNAMORIO_OPTIONS=\\\"-security -aslr 0x47\\\"",# DLL + heap + stack + heap fill |
| "DYNAMORIO_OPTIONS=\\\"-security -aslr 0x1 -aslr_action 0x1\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-security -aslr 0x1 -aslr_dll_base 0x50000000 -aslr_dll_top 0x70000000 -aslr_dll_offset 0x01000000 -aslr_dll_pad 0x01000000\\\"", |
| # ASLR - shared cache |
| "ONLY::runnointerface::DYNAMORIO_OPTIONS=\\\"-security -client -aslr_cache 0x3170\\\"", # hotp+ASLR+SHARED demo |
| "ONLY::runos::DYNAMORIO_OPTIONS=\\\"-security -client -aslr_cache_list 0\\\"", |
| "ONLY::runos::DYNAMORIO_OPTIONS=\\\"-security -client -aslr_cache_list 2\\\"", |
| "ONLY::runos::DYNAMORIO_OPTIONS=\\\"-security -aslr 0x7 -aslr_cache 0x3170\\\"", # full DR+ASLR+SHARED demo |
| |
| # stress testing exemptions |
| "DYNAMORIO_OPTIONS=\\\"-security -aslr 0x1 -exempt_aslr_list '*'\\\"", |
| # GBOP exclusion test |
| "ONLY::runsecurity::DYNAMORIO_OPTIONS=\\\"-security -low -gbop_exclude_list 'kernel32.dll!LoadLibraryA'\\\"", |
| # Don't use TLS slots for IBL table addresses & masks |
| "DYNAMORIO_OPTIONS=\\\"-no_ibl_table_in_tls\\\"", |
| ); |
| # note all product runs are shared between release and debug runs |
| @debug_runs = ( @common_debug_runs, |
| "SHORT::ONLY::runos runsecurity runrunall::DYNAMORIO_OPTIONS=\\\"-probe_api -hotp_only\\\"", |
| "SHORT::ONLY::runrunall::DYNAMORIO_OPTIONS=\\\"-thin_client\\\"", |
| # to save time in short we only do debug version of -low |
| "ONLY::runnointerface::DYNAMORIO_OPTIONS=\\\"-security -low\\\"", |
| "DYNAMORIO_OPTIONS=\\\"-reset_at_fragment_count 1000\\\"", |
| # ASLR internal stress testing only |
| "DYNAMORIO_OPTIONS=\\\"-security -aslr 1 -aslr_internal 0x1000\\\"", |
| ); |
| } |
| |
| #FIXME: options that need product runs |
| # dynamic_options |
| |
| #FIXME: internal options to be added to internal runs |
| # nolink |
| # tracedump_threshold |
| # thread_stats global_stats |
| # thread_stats_interval 1000 |
| # global_stats_interval 1000 |
| # hashtable_ibl_stats |
| # deadlock_avoidance |
| # heap_accounting_assert |
| # prof_pcs_* with non-default shifts should have a run |
| # ... |
| |
| # this is used in common_cases and to determine whether to run the |
| # share tests in the short run. |
| $release_build = "BUILD::DEBUG=0 INTERNAL=0"; |
| $external_debug_build = "BUILD::DEBUG=1 INTERNAL=0"; |
| |
| #### The long run contains pretty much all configurations we would like to maintain |
| #### lines marked #l were taken out to make it shorter |
| #### Add here runs that are not to be run in release builds, otherwise use common_product_runs |
| @common_cases = ( |
| ### we do NOT prepend short cases since we want more runs of each |
| ### debug internal version |
| "BUILD::DEBUG=1 INTERNAL=1", |
| # shared runs with release build |
| @product_runs, |
| # debug build or internal only options |
| @debug_runs, |
| ### default product build |
| $release_build, |
| # shared runs with debug build |
| @product_runs, |
| # release only runs |
| @release_runs, |
| ### debug external version, maybe part of product |
| $external_debug_build, |
| "DYNAMORIO_OPTIONS=\\\"\\\"", |
| ### non-debug internal version |
| "BUILD::DEBUG=0 INTERNAL=1", |
| "DYNAMORIO_OPTIONS=\\\"\\\"", |
| ### non-product configurations that we want to not only build but also run |
| # turn off everything |
| "BUILD::CLIENT_INTERFACE=0 PROGRAM_SHEPHERDING=0 GBOP=0 HOT_PATCHING_INTERFACE=0 PROCESS_CONTROL=0", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"\\\"", |
| ### profiling |
| ### FIXME: add tests of client interface routines, including app start/stop interface? |
| ### (i.e., re-activate api/startstop test and add new tests) |
| # |
| ### would only want to run for this build |
| "BUILD::ADD_DEFINES=\"${D}PROFILE_LINKCOUNT ${D}LINKCOUNT_64_BITS\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-no_inline_trace_ibl\\\"", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-no_shared_traces -prof_counts -tracedump_binary -no_inline_trace_ibl\\\" TEST_MINS=20 RUNALL_SLEEP=15s", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-prof_counts -tracedump_binary -no_inline_trace_ibl\\\" TEST_MINS=20 RUNALL_SLEEP=15s", |
| "ONLY::runcommon::DYNAMORIO_OPTIONS=\\\"-prof_counts -tracedump_text -no_inline_trace_ibl\\\" TEST_MINS=20 RUNALL_SLEEP=15s", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"-tracedump_binary -tracedump_origins -no_inline_trace_ibl\\\" TEST_MINS=20", |
| "ONLY::runcommon::DYNAMORIO_OPTIONS=\\\"-tracedump_text -tracedump_origins -no_inline_trace_ibl\\\" TEST_MINS=20 RUNALL_SLEEP=15s", |
| ### client interface |
| # We have some client interface tests working for Windows only, so the following |
| # build is currently placed in the os-specific sections above. Once these |
| # tests are verified to work with Linux, we should move all client interface |
| # entries to here. |
| # "BUILD::CLIENT_INTERFACE=1", |
| # "DYNAMORIO_OPTIONS=\\\"\\\"", |
| ## we won't bother to keep explicitly supporting this combination |
| ## "BUILD::CLIENT_INTERFACE=1 ADD_DEFINES=\"${D}PROFILE_LINKCOUNT ${D}LINKCOUNT_64_BITS\"", |
| # "DYNAMORIO_OPTIONS=\\\"-no_inline_trace_ibl\\\"", |
| ### sideline no longer supported |
| ## "BUILD::CLIENT_INTERFACE=1 ADD_DEFINES=\"${D}CLIENT_SIDELINE\"", |
| ### release-build kstats and callprof |
| "BUILD::DEBUG=0 INTERNAL=0 KSTATS=1 CALLPROF=1", |
| "ONLY::all::DYNAMORIO_OPTIONS=\\\"\\\"", |
| ### defines we don't want to break -- no runs though |
| ### no longer supported |
| ## "BUILD::STATIC=1", |
| "BUILD::ADD_DEFINES=\"${D}DYNAMORIO_APP_EXPORTS ${D}DGC_DIAGNOSTICS\"", |
| ### no longer supported |
| ## "BUILD::ADD_DEFINES=\"${D}SIMULATE_ATTACK\"", |
| ### no longer supported |
| ## "BUILD::ADD_DEFINES=\"${D}SIDELINE\"", |
| ### not worth supporting by itself |
| ## "BUILD::ADD_DEFINES=\"${D}RCT_IND_BRANCH\"", |
| ### may want to add in future -- don't build right now though |
| ## "BUILD::ADD_DEFINES=\"${D}NATIVE_RETURN ${D}ASSUME_NORMAL_EFLAGS ${D}CUSTOM_EXIT_STUBS\"", |
| ## "BUILD::ADD_DEFINES=\"${D}RETURN_STACK\"", |
| ### os-specific cases will be inserted here |
| ); |
