#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Copyright (c) 2000-2002,2006 Silicon Graphics, Inc.  All Rights Reserved.
#
# Control script for QA
#
tmp=/tmp/$$
status=0
needwrap=true
needsum=true
n_try=0
try=""
n_bad=0
sum_bad=0
bad=""
n_notrun=0
notrun=""
interrupt=true
diff="diff -u"
showme=false
have_test_arg=false
randomize=false
exact_order=false
export here=`pwd`
xfile=""
subdir_xfile=""
brief_test_summary=false
do_report=false
DUMP_OUTPUT=false
iterations=1
istop=false

# This is a global variable used to pass test failure text to reporting gunk
_err_msg=""

# start the initialisation work now
iam=check

export MSGVERB="text:action"
export QA_CHECK_FS=${QA_CHECK_FS:=true}

# number of diff lines from a failed test, 0 for whole output
export DIFF_LENGTH=${DIFF_LENGTH:=10}

# by default don't output timestamps
timestamp=${TIMESTAMP:=false}

rm -f $tmp.list $tmp.tmp $tmp.grep $here/$iam.out $tmp.xlist $tmp.report.*

SRC_GROUPS="generic shared"
export SRC_DIR="tests"

usage()
{
    echo "Usage: $0 [options] [testlist]"'

check options
    -nfs		test NFS
    -glusterfs		test GlusterFS
    -cifs		test CIFS
    -9p			test 9p
    -virtiofs		test virtiofs
    -overlay		test overlay
    -pvfs2		test PVFS2
    -tmpfs		test TMPFS
    -ubifs		test ubifs
    -l			line mode diff
    -udiff		show unified diff (default)
    -n			show me, do not run tests
    -T			output timestamps
    -r			randomize test order
    --exact-order	run tests in the exact order specified
    -i <n>		iterate the test list <n> times
    -I <n>		iterate the test list <n> times, but stops iterating further in case of any test failure
    -d			dump test output to stdout
    -b			brief test summary
    -R fmt[,fmt]	generate report in formats specified. Supported format: [xunit]
    --large-fs		optimise scratch device for large filesystems
    -s section		run only specified section from config file
    -S section		exclude the specified section from the config file

testlist options
    -g group[,group...]	include tests from these groups
    -x group[,group...]	exclude tests from these groups
    -X exclude_file	exclude individual tests
    -e testlist         exclude a specific list of tests
    -E external_file	exclude individual tests
    [testlist]		include tests matching names in testlist

testlist argument is a list of tests in the form of <test dir>/<test name>.

<test dir> is a directory under tests that contains a group file,
with a list of the names of the tests in that directory.

<test name> may be either a specific test file name (e.g. xfs/001) or
a test file name match pattern (e.g. xfs/*).

group argument is either a name of a tests group to collect from all
the test dirs (e.g. quick) or a name of a tests group to collect from
a specific tests dir in the form of <test dir>/<group name> (e.g. xfs/quick).
If you want to run all the tests in the test suite, use "-g all" to specify all
groups.

exclude_file argument refers to a name of a file inside each test directory.
for every test dir where this file is found, the listed test names are
excluded from the list of tests to run from that test dir.

external_file argument is a path to a single file containing a list of tests
to exclude in the form of <test dir>/<test name>.

examples:
 check xfs/001
 check -g quick
 check -g xfs/quick
 check -x stress xfs/*
 check -X .exclude -g auto
 check -E ~/.xfstests.exclude
'
	    exit 1
}

get_sub_group_list()
{
	local d=$1
	local grp=$2

	test -s "$SRC_DIR/$d/group.list" || return 1

	local grpl=$(sed -n < $SRC_DIR/$d/group.list \
		-e 's/#.*//' \
		-e 's/$/ /' \
		-e "s;^\($VALID_TEST_NAME\).* $grp .*;$SRC_DIR/$d/\1;p")
	echo $grpl
}

get_group_list()
{
	local grp=$1
	local grpl=""
	local sub=$(dirname $grp)
	local fsgroup="$FSTYP"

	if [ -n "$sub" -a "$sub" != "." -a -d "$SRC_DIR/$sub" ]; then
		# group is given as <subdir>/<group> (e.g. xfs/quick)
		grp=$(basename $grp)
		get_sub_group_list $sub $grp
		return
	fi

	if [ "$FSTYP" = ext2 -o "$FSTYP" = ext3 ]; then
	    fsgroup=ext4
	fi
	for d in $SRC_GROUPS $fsgroup; do
		if ! test -d "$SRC_DIR/$d" ; then
			continue
		fi
		grpl="$grpl $(get_sub_group_list $d $grp)"
	done
	echo $grpl
}

# Find all tests, excluding files that are test metadata such as group files.
# It matches test names against $VALID_TEST_NAME defined in common/rc
get_all_tests()
{
	touch $tmp.list
	for d in $SRC_GROUPS $FSTYP; do
		if ! test -d "$SRC_DIR/$d" ; then
			continue
		fi
		ls $SRC_DIR/$d/* | \
			grep -v "\..*" | \
			grep "^$SRC_DIR/$d/$VALID_TEST_NAME"| \
			grep -v "group\|Makefile" >> $tmp.list 2>/dev/null
	done
}

# takes the list of tests to run in $tmp.list, and removes the tests passed to
# the function from that list.
trim_test_list()
{
	test_list="$*"

	rm -f $tmp.grep
	numsed=0
	for t in $test_list
	do
	    if [ $numsed -gt 100 ]; then
		grep -v -f $tmp.grep <$tmp.list >$tmp.tmp
		mv $tmp.tmp $tmp.list
		numsed=0
		rm -f $tmp.grep
	    fi
	    echo "^$t\$" >>$tmp.grep
	    numsed=`expr $numsed + 1`
	done
	grep -v -f $tmp.grep <$tmp.list >$tmp.tmp
	mv $tmp.tmp $tmp.list
	rm -f $tmp.grep
}


_wallclock()
{
    date "+%s"
}

_timestamp()
{
    now=`date "+%T"`
    echo -n " [$now]"
}

_prepare_test_list()
{
	unset list
	# Tests specified on the command line
	if [ -s $tmp.arglist ]; then
		cat $tmp.arglist > $tmp.list
	else
		touch $tmp.list
	fi

	# Specified groups to include
	# Note that the CLI processing adds a leading space to the first group
	# parameter, so we have to catch that here checking for "all"
	if ! $have_test_arg && [ "$GROUP_LIST" == " all" ]; then
		# no test numbers, do everything
		get_all_tests
	else
		for group in $GROUP_LIST; do
			list=$(get_group_list $group)
			if [ -z "$list" ]; then
				echo "Group \"$group\" is empty or not defined?"
				exit 1
			fi

			for t in $list; do
				grep -s "^$t\$" $tmp.list >/dev/null || \
							echo "$t" >>$tmp.list
			done
		done
	fi

	# Specified groups to exclude
	for xgroup in $XGROUP_LIST; do
		list=$(get_group_list $xgroup)
		if [ -z "$list" ]; then
			echo "Group \"$xgroup\" is empty or not defined?"
			continue
		fi

		trim_test_list $list
	done

	# sort the list of tests into numeric order unless we're running tests
	# in the exact order specified
	if ! $exact_order; then
		if $randomize; then
			if type shuf >& /dev/null; then
				sorter="shuf"
			else
				sorter="awk -v seed=$RANDOM -f randomize.awk"
			fi
		else
			sorter="cat"
		fi
		list=`sort -n $tmp.list | uniq | $sorter`
	else
		list=`cat $tmp.list`
	fi
	rm -f $tmp.list
}

# Process command arguments first.
while [ $# -gt 0 ]; do
	case "$1" in
	-\? | -h | --help) usage ;;

	-nfs)		FSTYP=nfs ;;
	-glusterfs)	FSTYP=glusterfs ;;
	-cifs)		FSTYP=cifs ;;
	-9p)		FSTYP=9p ;;
	-virtiofs)	FSTYP=virtiofs ;;
	-overlay)	FSTYP=overlay; export OVERLAY=true ;;
	-pvfs2)		FSTYP=pvfs2 ;;
	-tmpfs)		FSTYP=tmpfs ;;
	-ubifs)		FSTYP=ubifs ;;

	-g)	group=$2 ; shift ;
		GROUP_LIST="$GROUP_LIST ${group//,/ }"
		;;

	-x)	xgroup=$2 ; shift ;
		XGROUP_LIST="$XGROUP_LIST ${xgroup//,/ }"
		;;

	-X)	subdir_xfile=$2; shift ;
		;;
	-e)
		xfile=$2; shift ;
		echo "$xfile" | tr ', ' '\n\n' >> $tmp.xlist
		;;

	-E)	xfile=$2; shift ;
		if [ -f $xfile ]; then
			sed "s/#.*$//" "$xfile" >> $tmp.xlist
	        fi
		;;
	-s)	RUN_SECTION="$RUN_SECTION $2"; shift ;;
	-S)	EXCLUDE_SECTION="$EXCLUDE_SECTION $2"; shift ;;
	-l)	diff="diff" ;;
	-udiff)	diff="$diff -u" ;;

	-n)	showme=true ;;
	-r)
		if $exact_order; then
			echo "Cannot specify -r and --exact-order."
			exit 1
		fi
		randomize=true
		;;
	--exact-order)
		if $randomize; then
			echo "Cannnot specify --exact-order and -r."
			exit 1
		fi
		exact_order=true
		;;
	-i)	iterations=$2; shift ;;
	-I) 	iterations=$2; istop=true; shift ;;
	-T)	timestamp=true ;;
	-d)	DUMP_OUTPUT=true ;;
	-b)	brief_test_summary=true;;
	-R)	report_fmt=$2 ; shift ;
		REPORT_LIST="$REPORT_LIST ${report_fmt//,/ }"
		do_report=true
		;;
	--large-fs) export LARGE_SCRATCH_DEV=yes ;;
	--extra-space=*) export SCRATCH_DEV_EMPTY_SPACE=${r#*=} ;;

	-*)	usage ;;
	*)	# not an argument, we've got tests now.
		have_test_arg=true ;;
	esac

	# if we've found a test specification, the break out of the processing
	# loop before we shift the arguments so that this is the first argument
	# that we process in the test arg loop below.
	if $have_test_arg; then
		break;
	fi

	shift
done

# we need common/rc, that also sources common/config. We need to source it
# after processing args, overlay needs FSTYP set before sourcing common/config
if ! . ./common/rc; then
	echo "check: failed to source common/rc"
	exit 1
fi

if [ -n "$subdir_xfile" ]; then
	for d in $SRC_GROUPS $FSTYP; do
		[ -f $SRC_DIR/$d/$subdir_xfile ] || continue
		for f in `sed "s/#.*$//" $SRC_DIR/$d/$subdir_xfile`; do
			echo $d/$f >> $tmp.xlist
		done
	done
fi

# Process tests from command line now.
if $have_test_arg; then
	while [ $# -gt 0 ]; do
		case "$1" in
		-*)	echo "Arguments before tests, please!"
			status=1
			exit $status
			;;
		*)	# Expand test pattern (e.g. xfs/???, *fs/001)
			list=$(cd $SRC_DIR; echo $1)
			for t in $list; do
				test_dir=`dirname $t`
				test_dir=${test_dir#$SRC_DIR/*}
				test_name=`basename $t`
				group_file=$SRC_DIR/$test_dir/group.list

				if egrep -q "^$test_name" $group_file; then
					# in group file ... OK
					echo $SRC_DIR/$test_dir/$test_name \
						>>$tmp.arglist
				else
					# oops
					echo "$t - unknown test, ignored"
				fi
			done
			;;
		esac

		shift
	done
elif [ -z "$GROUP_LIST" ]; then
	# default group list is the auto group. If any other group or test is
	# specified, we use that instead.
	GROUP_LIST="auto"
fi

if [ `id -u` -ne 0 ]
then
    echo "check: QA must be run as root"
    exit 1
fi

_wipe_counters()
{
	n_try="0"
	n_bad="0"
	n_notrun="0"
	unset try notrun bad
}

_global_log() {
	echo "$1" >> $check.log
	if $OPTIONS_HAVE_SECTIONS; then
		echo "$1" >> ${REPORT_DIR}/check.log
	fi
}

_wrapup()
{
	seq="check"
	check="$RESULT_BASE/check"

	if $showme; then
		if $needwrap; then
			if $do_report; then
				_make_section_report
			fi
			needwrap=false
		fi
	elif $needwrap; then
		if [ -f $check.time -a -f $tmp.time ]; then
			cat $check.time $tmp.time  \
				| $AWK_PROG '
				{ t[$1] = $2 }
				END {
					if (NR > 0) {
						for (i in t) print i " " t[i]
					}
				}' \
				| sort -n >$tmp.out
			mv $tmp.out $check.time
			if $OPTIONS_HAVE_SECTIONS; then
				cp $check.time ${REPORT_DIR}/check.time
			fi
		fi

		_global_log ""
		_global_log "$(date)"

		echo "SECTION       -- $section" >>$tmp.summary
		echo "=========================" >>$tmp.summary
		if [ ! -z "$n_try" -a $n_try != 0 ]; then
			if [ $brief_test_summary == "false" ]; then
				echo "Ran:$try"
				echo "Ran:$try" >>$tmp.summary
			fi
			_global_log "Ran:$try"
		fi

		$interrupt && echo "Interrupted!" | tee -a $check.log
		if $OPTIONS_HAVE_SECTIONS; then
			$interrupt && echo "Interrupted!" | tee -a \
				${REPORT_DIR}/check.log
		fi

		if [ ! -z "$notrun" ]; then
			if [ $brief_test_summary == "false" ]; then
				echo "Not run:$notrun"
				echo "Not run:$notrun" >>$tmp.summary
			fi
			_global_log "Not run:$notrun"
		fi

		if [ ! -z "$n_bad" -a $n_bad != 0 ]; then
			echo "Failures:$bad"
			echo "Failed $n_bad of $n_try tests"
			_global_log "Failures:$bad"
			_global_log "Failed $n_bad of $n_try tests"
			echo "Failures:$bad" >>$tmp.summary
			echo "Failed $n_bad of $n_try tests" >>$tmp.summary
		else
			echo "Passed all $n_try tests"
			_global_log "Passed all $n_try tests"
			echo "Passed all $n_try tests" >>$tmp.summary
		fi
		echo "" >>$tmp.summary
		if $do_report; then
			_make_section_report
		fi
		needwrap=false
	fi

	sum_bad=`expr $sum_bad + $n_bad`
	_wipe_counters
	rm -f /tmp/*.rawout /tmp/*.out /tmp/*.err /tmp/*.time
	if ! $OPTIONS_HAVE_SECTIONS; then
		rm -f $tmp.*
	fi
}

_summary()
{
	_wrapup
	if $showme; then
		:
	elif $needsum; then
		count=`wc -L $tmp.summary | cut -f1 -d" "`
		cat $tmp.summary
		needsum=false
	fi
	rm -f $tmp.*
}

_check_filesystems()
{
	local ret=0

	if [ -f ${RESULT_DIR}/require_test ]; then
		_check_test_fs || ret=1
		rm -f ${RESULT_DIR}/require_test*
	else
		_test_unmount 2> /dev/null
	fi
	if [ -f ${RESULT_DIR}/require_scratch ]; then
		_check_scratch_fs || ret=1
		rm -f ${RESULT_DIR}/require_scratch*
	fi
	_scratch_unmount 2> /dev/null
	return $ret
}

_expunge_test()
{
	local TEST_ID="$1"
	if [ -s $tmp.xlist ]; then
		if grep -q $TEST_ID $tmp.xlist; then
			echo "       [expunged]"
			return 1
		fi
	fi
	return 0
}

# Can we run systemd scopes?
HAVE_SYSTEMD_SCOPES=
systemctl reset-failed "fstests-check" &>/dev/null
systemd-run --quiet --unit "fstests-check" --scope bash -c "exit 77" &> /dev/null
test $? -eq 77 && HAVE_SYSTEMD_SCOPES=yes

# Make the check script unattractive to the OOM killer...
OOM_SCORE_ADJ="/proc/self/oom_score_adj"
function _adjust_oom_score() {
	test -w "${OOM_SCORE_ADJ}" && echo "$1" > "${OOM_SCORE_ADJ}"
}
_adjust_oom_score -500

# ...and make the tests themselves somewhat more attractive to it, so that if
# the system runs out of memory it'll be the test that gets killed and not the
# test framework.  The test is run in a separate process without any of our
# functions, so we open-code adjusting the OOM score.
#
# If systemd is available, run the entire test script in a scope so that we can
# kill all subprocesses of the test if it fails to clean up after itself.  This
# is essential for ensuring that the post-test unmount succeeds.  Note that
# systemd doesn't automatically remove transient scopes that fail to terminate
# when systemd tells them to terminate (e.g. programs stuck in D state when
# systemd sends SIGKILL), so we use reset-failed to tear down the scope.
_run_seq() {
	local cmd=(bash -c "test -w ${OOM_SCORE_ADJ} && echo 250 > ${OOM_SCORE_ADJ}; exec ./$seq")

	if [ -n "${HAVE_SYSTEMD_SCOPES}" ]; then
		local unit="$(systemd-escape "fs$seq").scope"
		systemctl reset-failed "${unit}" &> /dev/null
		systemd-run --quiet --unit "${unit}" --scope "${cmd[@]}"
		res=$?
		systemctl stop "${unit}" &> /dev/null
		return "${res}"
	else
		"${cmd[@]}"
	fi
}

_detect_kmemleak
_prepare_test_list

if $OPTIONS_HAVE_SECTIONS; then
	trap "_summary; exit \$status" 0 1 2 3 15
else
	trap "_wrapup; exit \$status" 0 1 2 3 15
fi

function run_section()
{
	local section=$1

	OLD_FSTYP=$FSTYP
	OLD_TEST_FS_MOUNT_OPTS=$TEST_FS_MOUNT_OPTS
	get_next_config $section

	# Do we need to run only some sections ?
	if [ ! -z "$RUN_SECTION" ]; then
		skip=true
		for s in $RUN_SECTION; do
			if [ $section == $s ]; then
				skip=false
				break;
			fi
		done
		if $skip; then
			return
		fi
	fi

	# Did this section get excluded?
	if [ ! -z "$EXCLUDE_SECTION" ]; then
		skip=false
		for s in $EXCLUDE_SECTION; do
			if [ $section == $s ]; then
				skip=true
				break;
			fi
		done
		if $skip; then
			return
		fi
	fi

	mkdir -p $RESULT_BASE
	if [ ! -d $RESULT_BASE ]; then
		echo "failed to create results directory $RESULT_BASE"
		status=1
		exit
	fi

	if $OPTIONS_HAVE_SECTIONS; then
		echo "SECTION       -- $section"
	fi

	sect_start=`_wallclock`
	if $RECREATE_TEST_DEV || [ "$OLD_FSTYP" != "$FSTYP" ]; then
		echo "RECREATING    -- $FSTYP on $TEST_DEV"
		_test_unmount 2> /dev/null
		if ! _test_mkfs >$tmp.err 2>&1
		then
			echo "our local _test_mkfs routine ..."
			cat $tmp.err
			echo "check: failed to mkfs \$TEST_DEV using specified options"
			status=1
			exit
		fi
		if ! _test_mount
		then
			echo "check: failed to mount $TEST_DEV on $TEST_DIR"
			status=1
			exit
		fi
		# TEST_DEV has been recreated, previous FSTYP derived from
		# TEST_DEV could be changed, source common/rc again with
		# correct FSTYP to get FSTYP specific configs, e.g. common/xfs
		. common/rc
		_prepare_test_list
	elif [ "$OLD_TEST_FS_MOUNT_OPTS" != "$TEST_FS_MOUNT_OPTS" ]; then
		_test_unmount 2> /dev/null
		if ! _test_mount
		then
			echo "check: failed to mount $TEST_DEV on $TEST_DIR"
			status=1
			exit
		fi
	fi

	init_rc

	seq="check"
	check="$RESULT_BASE/check"

	# don't leave old full output behind on a clean run
	rm -f $check.full

	[ -f $check.time ] || touch $check.time

	# print out our test configuration
	echo "FSTYP         -- `_full_fstyp_details`"
	echo "PLATFORM      -- `_full_platform_details`"
	if [ ! -z "$SCRATCH_DEV" ]; then
	  echo "MKFS_OPTIONS  -- `_scratch_mkfs_options`"
	  echo "MOUNT_OPTIONS -- `_scratch_mount_options`"
	fi
	echo
	needwrap=true

	if [ ! -z "$SCRATCH_DEV" ]; then
	  _scratch_unmount 2> /dev/null
	  # call the overridden mkfs - make sure the FS is built
	  # the same as we'll create it later.

	  if ! _scratch_mkfs >$tmp.err 2>&1
	  then
	      echo "our local _scratch_mkfs routine ..."
	      cat $tmp.err
	      echo "check: failed to mkfs \$SCRATCH_DEV using specified options"
	      status=1
	      exit
	  fi

	  # call the overridden mount - make sure the FS mounts with
	  # the same options that we'll mount with later.
	  if ! _try_scratch_mount >$tmp.err 2>&1
	  then
	      echo "our local mount routine ..."
	      cat $tmp.err
	      echo "check: failed to mount \$SCRATCH_DEV using specified options"
	      status=1
	      exit
	  else
	      _scratch_unmount
	  fi
	fi

	seqres="$check"
	_check_test_fs

	err=false
	first_test=true
	prev_seq=""
	for seq in $list ; do
		# Run report for previous test!
		if $err ; then
			bad="$bad $seqnum"
			n_bad=`expr $n_bad + 1`
			tc_status="fail"
		fi
		if $do_report && ! $first_test ; then
			if [ $tc_status != "expunge" ] ; then
				_make_testcase_report "$prev_seq" "$tc_status"
			fi
		fi
		first_test=false

		err=false
		prev_seq="$seq"
		if [ ! -f $seq ]; then
			# Try to get full name in case the user supplied only
			# seq id and the test has a name. A bit of hassle to
			# find really the test and not its sample output or
			# helping files.
			bname=$(basename $seq)
			full_seq=$(find $(dirname $seq) -name $bname* -executable |
				awk '(NR == 1 || length < length(shortest)) { shortest = $0 }\
				     END { print shortest }')
			if [ -f $full_seq ] && \
			   [ x$(echo $bname | grep -o "^$VALID_TEST_ID") != x ]; then
				seq=$full_seq
			fi
		fi

		# the filename for the test and the name output are different.
		# we don't include the tests/ directory in the name output.
		export seqnum=`echo $seq | sed -e "s;$SRC_DIR/;;"`

		# Similarly, the result directory needs to replace the tests/
		# part of the test location.
		group=`dirname $seq`
		if $OPTIONS_HAVE_SECTIONS; then
			export RESULT_DIR=`echo $group | sed -e "s;$SRC_DIR;${RESULT_BASE}/$section;"`
			REPORT_DIR="$RESULT_BASE/$section"
		else
			export RESULT_DIR=`echo $group | sed -e "s;$SRC_DIR;$RESULT_BASE;"`
			REPORT_DIR="$RESULT_BASE"
		fi
		seqres="$REPORT_DIR/$seqnum"

		mkdir -p $RESULT_DIR
		rm -f ${RESULT_DIR}/require_scratch*
		rm -f ${RESULT_DIR}/require_test*
		echo -n "$seqnum"

		if $showme; then
			_expunge_test $seqnum
			if [ $? -eq 1 ]; then
			    tc_status="expunge"
			    continue
			fi
			echo
			start=0
			stop=0
			tc_status="list"
			n_notrun=`expr $n_notrun + 1`
			continue
		fi

		tc_status="pass"
		if [ ! -f $seq ]; then
			echo " - no such test?"
			continue
		fi

		# really going to try and run this one
		rm -f $seqres.out.bad $seqres.hints

		# check if we really should run it
		_expunge_test $seqnum
		if [ $? -eq 1 ]; then
			tc_status="expunge"
			continue
		fi

		# record that we really tried to run this test.
		try="$try $seqnum"
		n_try=`expr $n_try + 1`

		# slashes now in names, sed barfs on them so use grep
		lasttime=`grep -w ^$seqnum $check.time | awk '// {print $2}'`
		if [ "X$lasttime" != X ]; then
			echo -n " ${lasttime}s ... "
		else
			echo -n "	" # prettier output with timestamps.
		fi
		rm -f core $seqres.notrun

		start=`_wallclock`
		$timestamp && echo -n "	["`date "+%T"`"]"
		[ ! -x $seq ] && chmod u+x $seq # ensure we can run it
		$LOGGER_PROG "run xfstest $seqnum"
		if [ -w /dev/kmsg ]; then
			export date_time=`date +"%F %T"`
			echo "run fstests $seqnum at $date_time" > /dev/kmsg
			# _check_dmesg depends on this log in dmesg
			touch ${RESULT_DIR}/check_dmesg
		fi
		_try_wipe_scratch_devs > /dev/null 2>&1

		# clear the WARN_ONCE state to allow a potential problem
		# to be reported for each test
		(echo 1 > $DEBUGFS_MNT/clear_warn_once) > /dev/null 2>&1

		if [ "$DUMP_OUTPUT" = true ]; then
			_run_seq 2>&1 | tee $tmp.out
			# Because $? would get tee's return code
			sts=${PIPESTATUS[0]}
		else
			_run_seq >$tmp.out 2>&1
			sts=$?
		fi

		if [ -f core ]; then
			_dump_err_cont "[dumped core]"
			mv core $RESULT_BASE/$seqnum.core
			err=true
		fi

		if [ -f $seqres.notrun ]; then
			$timestamp && _timestamp
			stop=`_wallclock`
			$timestamp || echo -n "[not run] "
			$timestamp && echo " [not run]" && \
				      echo -n "	$seqnum -- "
			cat $seqres.notrun
			notrun="$notrun $seqnum"
			n_notrun=`expr $n_notrun + 1`
			tc_status="notrun"

			# Unmount the scratch fs so that we can wipe the scratch
			# dev state prior to the next test run.
			_scratch_unmount 2> /dev/null
			continue;
		fi

		if [ $sts -ne 0 ]; then
			_dump_err_cont "[failed, exit status $sts]"
			_test_unmount 2> /dev/null
			_scratch_unmount 2> /dev/null
			rm -f ${RESULT_DIR}/require_test*
			rm -f ${RESULT_DIR}/require_scratch*
			err=true
		else
			# The test apparently passed, so check for corruption
			# and log messages that shouldn't be there.  Run the
			# checking tools from a subshell with adjusted OOM
			# score so that the OOM killer will target them instead
			# of the check script itself.
			(_adjust_oom_score 250; _check_filesystems) || err=true
			_check_dmesg || err=true
		fi

		# Reload the module after each test to check for leaks or
		# other problems.
		if [ -n "${TEST_FS_MODULE_RELOAD}" ]; then
			_test_unmount 2> /dev/null
			_scratch_unmount 2> /dev/null
			modprobe -r fs-$FSTYP
			modprobe fs-$FSTYP
		fi

		# Scan for memory leaks after every test so that associating
		# a leak to a particular test will be as accurate as possible.
		_check_kmemleak || err=true

		# test ends after all checks are done.
		$timestamp && _timestamp
		stop=`_wallclock`

		if [ ! -f $seq.out ]; then
			_dump_err "no qualified output"
			err=true
			continue;
		fi

		# coreutils 8.16+ changed quote formats in error messages
		# from `foo' to 'foo'. Filter old versions to match the new
		# version.
		sed -i "s/\`/\'/g" $tmp.out
		if diff $seq.out $tmp.out >/dev/null 2>&1 ; then
			if ! $err ; then
				echo "$seqnum `expr $stop - $start`" >>$tmp.time
				echo -n " `expr $stop - $start`s"
			fi
			echo ""
		else
			_dump_err "- output mismatch (see $seqres.out.bad)"
			mv $tmp.out $seqres.out.bad
			$diff $seq.out $seqres.out.bad | {
			if test "$DIFF_LENGTH" -le 0; then
				cat
			else
				head -n "$DIFF_LENGTH"
				echo "..."
				echo "(Run '$diff $here/$seq.out $seqres.out.bad'" \
					" to see the entire diff)"
			fi; } | sed -e 's/^\(.\)/    \1/'
			err=true
		fi
		if [ -f $seqres.hints ]; then
			if $err; then
				echo
				cat $seqres.hints
			else
				rm -f $seqres.hints
			fi
		fi
	done

	# make sure we record the status of the last test we ran.
	if $err ; then
		bad="$bad $seqnum"
		n_bad=`expr $n_bad + 1`
		tc_status="fail"
	fi
	if $do_report && ! $first_test ; then
		if [ $tc_status != "expunge" ] ; then
			_make_testcase_report "$prev_seq" "$tc_status"
		fi
	fi

	sect_stop=`_wallclock`
	interrupt=false
	_wrapup
	interrupt=true
	echo

	_test_unmount 2> /dev/null
	_scratch_unmount 2> /dev/null
}

for ((iters = 0; iters < $iterations; iters++)) do
	for section in $HOST_OPTIONS_SECTIONS; do
		run_section $section
		if [ "$sum_bad" != 0 ] && [ "$istop" = true ]; then
			interrupt=false
			status=`expr $sum_bad != 0`
			exit
		fi
	done
done

interrupt=false
status=`expr $sum_bad != 0`
exit