common/dump

##/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Copyright (c) 2000-2002,2005 Silicon Graphics, Inc.  All Rights Reserved.
#
# Functions useful for xfsdump/xfsrestore tests

# --- initializations ---
rm -f $seqres.full

if [ -n "$DEBUGDUMP" ]; then
	_dump_debug=-v4
	_restore_debug=-v4
	_invutil_debug=-d

	# Use dump/restore in qa directory (copy them here) for debugging
	export PATH="$here:$PATH"
	export __XFSDUMP_PROG=$(type -P xfsdump)
	export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
	export XFSRESTORE_PROG=$(type -P xfsrestore)
	export XFSINVUTIL_PROG=$(type -P xfsinvutil)
	[ -x $here/xfsdump ]    && echo "Using xfstests' xfsdump for debug"
	[ -x $here/xfsrestore ] && echo "Using xfstests' xfsrestore for debug"
	[ -x $here/xfsinvutil ] && echo "Using xfstests' xfsinvutil for debug"
fi

[ "$XFSDUMP_PROG" = "" ]    && _notrun "xfsdump not found"
[ "$XFSRESTORE_PROG" = "" ] && _notrun "xfsrestore not found"
[ "$XFSINVUTIL_PROG" = "" ] && _notrun "xfsinvutil not found"

_require_user_exists daemon
_require_user_exists bin
_require_group bin
_require_group sys

# status returned for not run tests
NOTRUNSTS=2

# name those directories
dump_file=$tmp.dumpfile
# dump_file=$here/dumpfile #TEMP OVERRIDE DUMP FILE
dump_sdir=dumpdir
dump_dir=$SCRATCH_MNT/$dump_sdir
restore_sdir=restoredir
restore_dir=$SCRATCH_MNT/$restore_sdir
multi=3
dumptape=$TAPE_DEV
media_label="stress_tape_media"
session_label="stress_$seq"

nobody=4 # define this uid/gid as a number
do_quota_check=true # do quota check if quotas enabled

# start inventory from a known base - move it aside for test
for dir in /var/xfsdump/inventory /var/lib/xfsdump/inventory; do
    if [ -d $dir ]; then
	[ -d $dir.$seq ] && rm -rf $dir.$seq
	mv $dir $dir.$seq
    fi
done

have_mtvariable=false
[ `uname` = "Linux" ] && have_mtvariable=true


_require_multi_stream()
{
    $XFSDUMP_PROG -JF -f /dev/null -f /dev/null 2> /dev/null |
    grep -q "too many -f arguments" &&
    _notrun "xfsdump multi-stream support required"
}

_require_legacy_v2_format()
{
    $XFSDUMP_PROG 2>&1 |
    grep -q "generate format 2 dump" ||
    _notrun "xfsdump -K option required"

    $XFSRESTORE_PROG 2>&1 |
    grep -q "force use of format 2 generation" ||
    _notrun "xfsrestore -K option required"
}

#
# do a remote/local mt
#
_mt()
{
    op=$1
    if _isrmt; then
	# REMOTE
	_rmtdev=`echo $dumptape | $AWK_PROG -F: '{print $2}'`

        if echo $dumptape | grep '@' >/dev/null; then
	    _spec=`echo $dumptape | $AWK_PROG -F: '{print $1}'`
	    _rmtuser=`echo $_spec | $AWK_PROG -F@ '{print $1}'`
	    _rmthost=`echo $_spec | $AWK_PROG -F@ '{print $2}'`
	    rsh -n -l $_rmtuser $_rmthost "mt -t $_rmtdev $op"
	else
	    _rmthost=`echo $dumptape | $AWK_PROG -F: '{print $1}'`
	    rsh -n $_rmthost "mt -t $_rmtdev $op"
	fi
    else
	#LOCAL
	mt -t $dumptape $op
    fi
}

_check_onl()
{
    _limit=10
    i=0
    while [ $i -lt $_limit ]; do
        echo "Checking online..." >>$seqres.full
	if _mt status >$tmp.status 2>&1; then
	    break;
	else
	    sleep 1
	fi
	let i=$i+1
    done


    if [ $i -eq $_limit ]; then
	echo "ERROR: mt -f $dumptape failed"
	cat $tmp.status

	_notrun "mt -f $dumptape failed"
    fi


    if grep -Ei 'onl|ready' $tmp.status | grep -iv 'not ready' >/dev/null; then
	:
    else
	echo "ERROR: $dumptape is not online"
	cat $tmp.status

	_notrun "dumptape, $dumptape, is not online"
    fi
}

_wait_tape()
{
    echo "Wait for tape, $dumptape, ..." >>$seqres.full

    i=0
    while [ $i -lt 20 ]; do
        echo "Checking status..." >>$seqres.full
	if _mt status 2>&1 | tee -a $seqres.full | grep -Ei "onl|ready" >/dev/null; then
	    break;
	else
	    sleep 1
	fi
	let i=$i+1
    done
}

#
# Keep trying so we know we really have rewound
#
_rewind()
{
    echo "Initiate rewind..." >>$seqres.full
    _wait_tape
    _mt rewind >/dev/null
    _wait_tape
}

#
# Do a custom erase because:
# (i) some machines don't support it
# (ii) some machines take forever to do it
#
_erase_soft()
{
    echo "Erasing tape" | tee -a $seqres.full
    _rewind
    _mt weof 3
    _rewind
}

_erase_hard()
{
    echo "Erasing tape" | tee -a $seqres.full
    _mt erase
}

_isrmt()
{
    echo $dumptape | grep ':' >/dev/null
}

#
# Get tape ready
#
_set_variable()
{
    $have_mtvariable || return

    if _isrmt; then
	:
    else
	# LOCAL
	echo "Put scsi tape driver into variable block size mode"
	mt -f $dumptape setblk 0
    fi
}

_require_tape()
{
    dumptape=$1

    if [ -z "$dumptape" -o "@" == "$dumptape" ]; then
	_notrun "No dump tape specified"
    fi

    _check_onl
    _set_variable
}

#
# Cleanup created dirs and files
# Called by trap
#
_cleanup_dump()
{
    # Some tests include this before checking _supported_fs xfs
    # and the sleeps & checks here get annoying
    if [ "$FSTYP" != "xfs" ]; then
       return
    fi

    cd $here

    if [ -n "$DEBUGDUMP" ]; then
	# save it for inspection
	for dir in /var/xfsdump/inventory /var/lib/xfsdump/inventory; do
	    [ -d $dir ] || continue
	    tar -cvf $seqres.inventory.tar $dir
	    ls -nR $dir >$seqres.inventory.ls
	done
    fi

    # put inventory dir back
    for dir in /var/xfsdump/inventory /var/lib/xfsdump/inventory; do
	[ -d $dir.$seq ] || continue
	rm -rf $dir		# get rid of new one
	mv $dir.$seq $dir
    done

    if [ -f ${RESULT_DIR}/require_scratch ] && [ $status -ne $NOTRUNSTS ]; then
	# Sleep added to stop _check_scratch_fs from complaining that the
	# scratch_dev is still busy
	sleep 10

	_check_scratch_fs
    fi
}

#
# ensure that bulkstat data will
# match with incore data
# by forcing disk data to be written out
#
_stable_fs()
{
    _saveddir=`pwd`; cd /
    _scratch_unmount >>$seqres.full || _fail "unmount failed"
    _scratch_mount >>$seqres.full
    cd $_saveddir
}

#
# Run fsstress to create a mixture of
# files,dirs,links,symlinks
#
# Pinched from test 013.
# Takes one argument, the number of ops to perform
#
_create_dumpdir_stress_num()
{
    echo "Creating directory system to dump using fsstress."

    _count=$1

    _param="-f link=10 -f creat=10 -f mkdir=10 -f truncate=5 -f symlink=10"
    rm -rf $dump_dir
    if ! mkdir $dump_dir; then
        echo "    failed to mkdir $dump_dir"
        status=1
        exit
    fi

    # Remove fsstress commands that aren't supported on all xfs configs so that
    # we always execute exactly the same sequence of operations no matter how
    # the filesystem is configured
    if $FSSTRESS_PROG | grep -q clonerange; then
        FSSTRESS_AVOID="-f clonerange=0 $FSSTRESS_AVOID"
    fi
    if $FSSTRESS_PROG | grep -q deduperange; then
        FSSTRESS_AVOID="-f deduperange=0 $FSSTRESS_AVOID"
    fi
    if $FSSTRESS_PROG | grep -q copyrange; then
        FSSTRESS_AVOID="-f copyrange=0 $FSSTRESS_AVOID"
    fi
    if $FSSTRESS_PROG | grep -q splice; then
        FSSTRESS_AVOID="-f splice=0 $FSSTRESS_AVOID"
    fi

    echo ""
    echo "-----------------------------------------------"
    echo "fsstress : $_param"
    echo "-----------------------------------------------"
    if ! $here/ltp/fsstress $_param -s 1 $FSSTRESS_AVOID -n $_count -d $dump_dir >$tmp.out 2>&1
    then
        echo "    fsstress (count=$_count) returned $? - see $seqres.full"

        echo "--------------------------------------"       >>$seqres.full
        echo "output from fsstress:"                        >>$seqres.full
        echo "--------------------------------------"       >>$seqres.full
        cat $tmp.out                                        >>$seqres.full
        status=1
    fi

    _stable_fs
}

_create_dumpdir_stress() {
	_create_dumpdir_stress_num 240
}

_mk_fillconfig1()
{
    cat <<End-of-File >$tmp.config
# pathname	size in bytes	owner	group
#
small		10	$nobody	$nobody
big		102400	daemon	sys
sub/small	10	bin	bin
sub/big		102400	$nobody	sys
#
sub/a		1	$nobody	$nobody
sub/b		2	$nobody	$nobody
sub/c		4	$nobody	$nobody
sub/d		8	$nobody	$nobody
sub/e		16	$nobody	$nobody
sub/f		32	$nobody	$nobody
sub/g		64	$nobody	$nobody
sub/h		128	$nobody	$nobody
sub/i		256	$nobody	$nobody
sub/j		512	$nobody	$nobody
sub/k		1024	$nobody	$nobody
sub/l		2048	$nobody	$nobody
sub/m		4096	$nobody	$nobody
sub/n		8192	$nobody	$nobody
#
sub/a00		100	$nobody	$nobody
sub/b00		200	$nobody	$nobody
sub/c00		400	$nobody	$nobody
sub/d00		800	$nobody	$nobody
sub/e00		1600	$nobody	$nobody
sub/f00		3200	$nobody	$nobody
sub/g00		6400	$nobody	$nobody
sub/h00		12800	$nobody	$nobody
sub/i00		25600	$nobody	$nobody
sub/j00		51200	$nobody	$nobody
sub/k00		102400	$nobody	$nobody
sub/l00		204800	$nobody	$nobody
sub/m00		409600	$nobody	$nobody
sub/n00		819200	$nobody	$nobody
#
sub/a000	1000	$nobody	$nobody
sub/e000	16000	$nobody	$nobody
sub/h000	128000	$nobody	$nobody
sub/k000	1024000	$nobody	$nobody
End-of-File
}

_mk_fillconfig2()
{
    cat <<End-of-File >$tmp.config
# pathname	size in bytes
#
smalll		10	$nobody	$nobody
biggg		102400	$nobody	$nobody
sub/smalll	10	$nobody	$nobody
sub/biggg	102400	$nobody	$nobody
End-of-File
}

_mk_fillconfig_perm()
{
    cat <<End-of-File >$tmp.config
# pathname	size/dir  user group mode
#
file_suid	10	$nobody	$nobody	04777
file_guid	10	$nobody	$nobody	02777
file_sticky	10	$nobody	$nobody	01777
file_mix1	10	$nobody	$nobody	761
file_mix2	10	$nobody	$nobody	642
dir_suid	d	$nobody	$nobody	04777
dir_guid	d	$nobody	$nobody	02777
dir_sticky	d	$nobody	$nobody	01777
dir_mix1	d	$nobody	$nobody	761
dir_mix2	d	$nobody	$nobody	642
End-of-File
}

_mk_fillconfig_ea()
{
    cat <<End-of-File >$tmp.config
# pathname	size    user    group    perm   name value namespace
#
smalll		10	$nobody	$nobody  777    attr1 some_text   user
biggg		102400	$nobody	$nobody  777    attr2 some_text2  root
sub/smalll	10	$nobody	$nobody  777    attr3 some_text3  user
sub/biggg	102400	$nobody	$nobody  777    attr4 some_text4  root
dir		d	$nobody $nobody  777    attr5 dir_text    user
#
# Add more files so that there are more than the number
# of streams.
# There are bugs in dump/restore for # non-dir files < # streams
# It can be tested in another configuration.
# It is a pathalogical case.
#
sub/a		1	$nobody	$nobody
sub/b		2	$nobody	$nobody
sub/c		4	$nobody	$nobody
sub/d		8	$nobody	$nobody
sub/e		16	$nobody	$nobody
sub/f		32	$nobody	$nobody
sub/g		64	$nobody	$nobody
sub/h		128	$nobody	$nobody
sub/i		256	$nobody	$nobody
sub/j		512	$nobody	$nobody
sub/k		1024	$nobody	$nobody
sub/l		2048	$nobody	$nobody
sub/m		4096	$nobody	$nobody
sub/n		8192	$nobody	$nobody
End-of-File
}

#
# extended file attribute flags
#
_mk_fillconfig_xattr()
{
    cat <<End-of-File >$tmp.config
# pathname	size    user    group    perm   name
#
xflag_realtime	10	$nobody $nobody  777    XFS_XFLAG_REALTIME
xflag_prealloc	10	$nobody $nobody  777    XFS_XFLAG_PREALLOC
xflag_immutable 10	$nobody $nobody  777    XFS_XFLAG_IMMUTABLE
xflag_append	10	$nobody $nobody  777    XFS_XFLAG_APPEND
xflag_sync	10	$nobody $nobody  777    XFS_XFLAG_SYNC
xflag_noatime	10	$nobody $nobody  777    XFS_XFLAG_NOATIME
xflag_nodump	10	$nobody $nobody  777    XFS_XFLAG_NODUMP
xflag_hasattr	10	$nobody $nobody  777    XFS_XFLAG_HASATTR
End-of-File
}

#
# Create a bunch of directories/files of different sizes
# filled with data.
#
# Pinched from test 001.
#
_do_create_dumpdir_fill()
{
    echo "Creating directory system to dump using src/fill."

    mkdir -p $dump_dir || _fail "cannot mkdir \"$dump_dir\""
    cd $dump_dir

    $verbose && echo -n "Setup "
    sed -e '/^#/d' $tmp.config \
    | while read file nbytes owner group perms ea_name ea_value namespace
    do
	if [ $nbytes = "d" ]; then
	    # create a directory
	    dir=$file
	    if [ ! -d $dir ]
	    then
		if mkdir $dir
		then
		    :
		else
		    $verbose && echo
		    echo "Error: cannot mkdir \"$dir\""
		    exit 1
		fi
	    fi
	else
	    # create a directory/file
	    dir=`dirname $file`
	    if [ "$dir" != "." ]
	    then
		if [ ! -d $dir ]
		then
		    if mkdir $dir
		    then
			:
		    else
			$verbose && echo
			echo "Error: cannot mkdir \"$dir\""
			exit 1
		    fi
		fi
	    fi
	    rm -f $file
	    if $here/src/fill $file $file $nbytes
	    then
		:
	    else
		$verbose && echo
		echo "Error: cannot create \"$file\""
		exit 1
	    fi
	fi
	if [ -n "$owner" -a -n "$group" ]; then
	    chown $owner:$group $file
	fi
	if [ -n "$perms" ]; then
	    chmod $perms $file
	fi

	# extended attributes (EA)
	if [ -n "$ea_name" -a -n "$ea_value" ]; then
	    if [ "X$namespace" = "Xroot" ]; then
		attr -R -s $ea_name -V $ea_value $file
	    else
		attr -s $ea_name -V $ea_value $file
	    fi
	# extended file attribute flags - no value - NOT EAs
	elif [ -n "$ea_name" -a -z "$ea_value" ]; then
	    # set the flag
	    # TODO XXX
            # use xfs_io to send the ioctl
	    :
	fi
	$verbose && echo -n "."
    done
    $verbose && echo

    cd $here
}

_mk_fillconfig_multi()
{
    _mk_fillconfig1
    cat <<End-of-File >>$tmp.config
# pathname	size in bytes
#
large000	8874368	$nobody	$nobody
large111	2582912	$nobody	$nobody
large222	7825792	$nobody	$nobody
End-of-File
}

_create_dumpdir_largefile()
{
    mkdir -p $dump_dir || _fail "cannot mkdir \"$dump_dir\""
    _largesize=4294967297
    _largefile=$dump_dir/largefile
    echo "dd a largefile at offset $_largesize"
    POSIXLY_CORRECT=yes \
    dd if=/dev/zero of=$_largefile bs=1 seek=$_largesize count=10 2>&1
    _stable_fs
}

_create_dumpdir_fill()
{
    _mk_fillconfig1
    _do_create_dumpdir_fill
    _stable_fs
}

_create_dumpdir_fill2()
{
    _mk_fillconfig2
    _do_create_dumpdir_fill
    _stable_fs
}

_create_dumpdir_fill_perm()
{
    _mk_fillconfig_perm
    _do_create_dumpdir_fill
    _stable_fs
}

_create_dumpdir_fill_ea()
{
    _mk_fillconfig_ea
    _do_create_dumpdir_fill
    _stable_fs
}

#
# Create enough files, and a few large enough files, so that
# some files are likely to be split across streams.
#
_create_dumpdir_fill_multi()
{
    _mk_fillconfig_multi
    _do_create_dumpdir_fill
    _stable_fs
}

#
# Append a subset of the fill'ed files
# So we can see if just these get dumped on an incremental
#
_append_dumpdir_fill()
{
    cd $dump_dir
    cat <<End-of-File >$tmp.config
# pathname
#
small
sub/big
#
sub/a
sub/c
sub/e
End-of-File
    sed -e '/^#/d' $tmp.config \
    | while read file
    do
        echo 'Extra text' >>$file
    done

    cd $here
    _stable_fs
}

_do_create_dump_symlinks()
{
    echo "Creating directory system of symlinks to dump."

    mkdir -p $dump_dir || _fail "cannot mkdir \"$dump_dir\""
    cd $dump_dir

    $verbose && echo -n "Setup "
    sed -e '/^#/d' $tmp.config \
    | while read file nbytes owner group owner2 group2 perms perms2
    do
	dir=`dirname $file`
	if [ "$dir" != "." ]
	then
	    if [ ! -d $dir ]
	    then
		if mkdir $dir
		then
		    :
		else
		    $verbose && echo
		    echo "Error: cannot mkdir \"$dir\""
		    exit 1
		fi
	    fi
	fi
	rm -f $file
	touch $file

	# Do chmod on symlink using umask.
	# This won't do the right thing as it subtracts permissions.
	# However, I don't care, as long as I get some different perms
	# for testing.
	if [ -n "$perms2" ]; then
	    omask=`umask`
	    umask $perms2
	fi
	ln -s $file $file-link
	if [ -n "$perms2" ]; then
	    umask $omask
	fi

	if [ -n "$owner" -a -n "$group" ]; then
	    chown $owner:$group $file
	fi
	if [ -n "$owner" -a -n "$group" ]; then
	    chown -h $owner:$group $file-link
	fi
	if [ -n "$perms" ]; then
	    chmod $perms $file
	fi
	$verbose && echo -n "."
    done
    $verbose && echo

    cd $here
}

_mk_symlink_config()
{
    cat <<End-of-File >$tmp.config
# path	size	owner1	group1	owner2	group2	perm1	perm2
#
a	0	$nobody	$nobody	daemon	sys	124	421
b	0	daemon	sys	bin	bin	347	743
sub/a	0	bin	bin	$nobody	sys	777	777
sub/b	0	$nobody	sys	$nobody	$nobody	367	763
End-of-File
}

_create_dumpdir_symlinks()
{
    _mk_symlink_config
    _do_create_dump_symlinks
    _stable_fs
}

#
# create hardlinks of form $_fname, $_fname_h1 $_fname_h2 ...
#
_create_hardlinks()
{
    _fname=$1
    _numlinks=$2

    touch $_fname
    _j=1
    while [ $_j -le $_numlinks ]; do
        _suffix=_h$_j
	_hardlink=$_fname$_suffix
	echo "creating hardlink $_hardlink to $_fname"
	ln $_fname $_hardlink
	let _j=$_j+1
    done
}

#
# create a set of hardlinks
# create hardlinks of form file1, file1_h1 file1_h2 ...
# create hardlinks of form file2, file2_h1 file2_h2 ...
# create hardlinks of form file3, file3_h1 file3_h2 ...
#
_create_hardset()
{
    _numsets=$1
    _i=1
    while [ $_i -le $_numsets ]; do
	_create_hardlinks file$_i 5
	let _i=$_i+1
    done
}


_modify_level()
{
    _level=$1
    echo "mod level $_level" >$dump_dir/file$_level
}

_create_dumpdir_hardlinks()
{
    _numsets=$1
    echo "Creating directory system of hardlinks to incrementally dump."

    mkdir -p $dump_dir || _fail "cannot mkdir \"$dump_dir\""
    cd $dump_dir

    _create_hardset $_numsets

    cd $here
    _stable_fs
}

#
# Filter for ls
# Filter out times and dates on symlinks and char devices.
# Filter out size on directories because this can differ
# when transitioning to long inode numbers (ie. 64 bits).
#
_ls_filter()
{
  $AWK_PROG '
        /^l/ { date = $8; time = $7; sub(date,"DATE"); sub(time,"TIME"); print}
        /^c/ { date = $9; time = $7; sub(date,"DATE"); sub(time,"TIME"); print}
        /^d/ { size = $5; sub(size,"SIZE"); print}
        {print}' \
  | sed -e 's/total [0-9][0-9]*/total TOTAL/'
}

#
# Filtering of Irix character hwgraph device names
# e.g.
# chardev: /hw/node/xtalk/15/pci/0/scsi_ctlr/0/target/1/lun/0/disk/partition/4/char
# blkdev:  /dev/dsk/dks0d1s4
#
_filter_devchar()
{
    $AWK_PROG '
	/\/hw\/node/ {
	    sub(/\/hw.*scsi_ctlr\//,"/dev/dsk/dks")  # blah blah /dev/dsk/dks0/target/1/....
	    sub(/\/target\//,"d")                    # blah blah /dev/dsk/dks0d1/lun/0/disk.....
	    sub(/\/lun.*partition\//,"s")            # blah blah /dev/dsk/dks0d1s4/char
	    sub(/\/char/,"")			     # blah blah /dev/dsk/dks0d1s4
	}
	{ print }
    '
}


#
# Filter out the non-deterministic dump msgs from
# xfsdump and xfsrestore
#
_dump_filter_main()
{
  _filter_devchar |\
  sed \
      -e "s#$__XFSDUMP_PROG#xfsdump#"			\
      -e "s#$XFSRESTORE_PROG#xfsrestore#"		\
      -e "s#$XFSINVUTIL_PROG#xfsinvutil#"		\
      -e "s/`hostname`/HOSTNAME/"			\
      -e "s#$SCRATCH_DEV#SCRATCH_DEV#"			\
      -e "s#$SCRATCH_RAWDEV#SCRATCH_DEV#"		\
      -e "s#$dumptape#TAPE_DEV#"			\
      -e "s#$SCRATCH_MNT#SCRATCH_MNT#"			\
      -e "s#$dump_file#DUMP_FILE#"			\
      -e 's#/var/lib/xfsdump#/var/xfsdump#'		\
      -e 's/session id:[ 	]*[0-9a-f-]*/session id: ID/'  \
      -e '/filesystem id:[ 	]*[0-9a-f-]*/d'		\
      -e 's/time:[ 	].*/time: TIME/'		\
      -e 's/date:[ 	].*/date: DATE/'		\
      -e 's/dump begun .*/dump begun DATE/'		\
      -e 's/previously begun .*/previously begun DATE/'	\
      -e 's/[0-9][0-9]* seconds/SECS seconds/'		\
      -e 's/restore.[0-9][0-9]*/restore.PID/'		\
      -e 's/ino [0-9][0-9]*/ino INO/g'			\
      -e '/stream [0-9]:/s/offset [0-9][0-9]*/offset NUM/g'	\
      -e '/: dump size/s/[0-9][0-9]*/NUM/'		\
      -e '/dump size:/s/[0-9][0-9]*/NUM/'		\
      -e '/dump size per stream:/s/[0-9][0-9]*/NUM/'	\
      -e 's/\(media file size[	 ]*\)[0-9][0-9]*/\1NUM/' \
      -e 's/\(mfile size:[	 ]*\)[0-9][0-9]*/\1NUM/' \
      -e '/drive[	 ]*[0-9][0-9]*:/d'		\
      -e '/\/dev\/tty/d'				\
      -e '/inventory session uuid/d'			\
      -e '/ - Running single-threaded/d'		\
      -e '/Mount point match/d'				\
      -e '/^.*I\/O metrics: .*$/d'			\
      -e 's/1048576/BLOCKSZ/'				\
      -e 's/2097152/BLOCKSZ/'				\
      -e 's/(pid[	 ]*[1-9][0-9]*)/\(pid PID\)/'	\
      -e '/version [3-9]\.[0-9]/d'			\
      -e 's/\/hw\/module.*$/SCRATCH_DEV/'		\
      -e 's/xfsdump: ino map phase 1: .*/xfsdump: ino map <PHASES>/' \
      -e '/xfsdump: ino map phase [2]/,1d'		\
      -e '/xfsdump: ino map phase [3]/,1d'		\
      -e '/xfsdump: ino map phase [4]/,1d'		\
      -e '/xfsdump: ino map phase [5]/,1d'		\
      -e 's/id:[[:space:]]*[0-9a-f]\{8\}-[0-9a-f]\{4\}-[0-9a-f]\{4\}-[0-9a-f]\{4\}-[0-9a-f]\{12\}/ID: ID/'						\
      -e 's/\[y\/n\][- ]----------------------*/\[y\/n\]/'		\
      -e '/skip attribute set/d'				\
      -e '/xfsrestore: NOTE: attempt to reserve [0-9]* bytes for.*Operation not supported/d' \
  | perl -ne '
	# filter out all the output between the lines "Dump Summary:"
	# and "Dump Status:"
	if ($_ =~ /(?:Dump|Restore) Summary/) {
		$skip = 1;
	} elsif ($_ =~ /(?:Dump|Restore) Status/) {
		$skip = 0;
	}
	print if (! $skip);' \
  | perl -ne '
	# correct the file count if large scratch devices are being used
	$skip = 0;
	if ($_ =~ /(\S+) directories and (\S+) entries/) {
		$foo = $2;
		if ($ENV{'LARGE_SCRATCH_DEV'} && $foo > 0) {
			$foo -= 1;
		}
		printf("xfsrestore: %u directories and %u entries processed\n",
						$1, $foo);
		$skip = 1;
	}
	print if (! $skip);'
}

_dump_filter()
{
   if $do_quota_check
   then
       _dump_filter_main | _check_quota_dumprestore | _check_quota_entries
   else
       _dump_filter_main
   fi
}

_invutil_filter()
{
  _dump_filter_main \
  | sed \
	-e 's/UUID[ 	]*:[ 	][0-9a-f-]*/UUID		:	ID/' \
	-e 's/TIME OF DUMP[ 	]*:.*/TIME OF DUMP	:	TIME/' \
        -e 's/HOSTNAME:SCRATCH_MNT.*/HOSTNAME:SCRATCH_MNT/' \
        -e 's#inventory/[0-9a-f-]*#inventory/UUID#' \

}


_dir_filter()
{
  sed \
    -e "s#$dump_file#DUMP_FILE#g"      \
    -e "s#$SCRATCH_DEV#SCRATCH_DEV#"        \
    -e "s#$SCRATCH_RAWDEV#SCRATCH_DEV#"    \
    -e "s#$dumptape#TAPE_DEV#"         \
    -e "s#$dump_dir#DUMP_DIR#g"       \
    -e "s#$restore_dir#RESTORE_DIR#g" \
    -e "s#$SCRATCH_MNT#SCRATCH_MNT#g"       \
    -e "s#$dump_sdir#DUMP_SUBDIR#g"   \
    -e "s#$restore_sdir#RESTORE_SUBDIR#g" \
    -e "s#$$#PID#g" \
    -e "/Only in SCRATCH_MNT: .use_space/d" \
    -e "s#$RESULT_DIR/##g" \

}

#
# Parse xfsdump arguments.
# Note: requires a space between option letter and argument
#
_parse_dump_args()
{
    OPTIND=0
    dump_args=""
    while [ $# -gt 0 ]
    do
        case $1
        in
        -f)
            [ -z "$2" ] && _fail "missing argument for -f"
	    dumptape=$2
	    dump_file=$2
	    shift
            ;;
        -L)
            [ -z "$2" ] && _fail "missing argument for -L"
	    session_label=$2
	    shift
            ;;
	--multi)
            [ -z "$2" ] && _fail "missing argument for --multi"
	    multi=$2
	    shift
	    ;;
        --check-quota)
            do_quota_check=true
            ;;
        --no-check-quota)
            do_quota_check=false
            ;;
	-o|-D|-F|-K)
	    dump_args="$dump_args $1"
            ;;
        -l|-d)
            [ -z "$2" ] && _fail "missing argument for $1"
	    dump_args="$dump_args $1$2"
	    shift
            ;;
	*)
            _fail "invalid argument to common/dump function: $1"
            ;;
        esac
	shift
    done
}

#
# Parse xfsrestore arguments.
# Note: requires a space between option letter and argument
#
_parse_restore_args()
{
    OPTIND=0
    restore_args=""
    while [ $# -gt 0 ]
    do
        case $1
        in
        -f)
            [ -z "$2" ] && _fail "missing argument for -f"
	    dumptape=$2
	    dump_file=$2
	    shift
            ;;
        -L)
            [ -z "$2" ] && _fail "missing argument for -L"
	    session_label=$2
	    shift
            ;;
	--multi)
            [ -z "$2" ] && _fail "missing argument for --multi"
	    multi=$2
	    shift
	    ;;
        --check-quota)
            do_quota_check=true
            ;;
        --no-check-quota)
            do_quota_check=false
            ;;
	-K|-R|-x)
	    restore_args="$restore_args $1"
            ;;
	*)
            _fail "invalid argument to common/dump function: $1"
            ;;
        esac
	shift
    done
}


#
# Dump a subdir
#
_do_dump_sub()
{
    _parse_dump_args $*

    echo "Dumping to tape..."
    opts="$_dump_debug$dump_args -s $dump_sdir -f $dumptape -M $media_label -L $session_label $SCRATCH_MNT"
    echo "xfsdump $opts" | _dir_filter
    $XFSDUMP_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}

#
# Do dump to tape
#
_do_dump()
{
    _parse_dump_args $*

    echo "Dumping to tape..."
    opts="$_dump_debug$dump_args -f $dumptape -M $media_label -L $session_label $SCRATCH_MNT"
    echo "xfsdump $opts" | _dir_filter
    $XFSDUMP_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}


#
# Do full dump with -m
#
_do_dump_min()
{
    _parse_dump_args $*

    echo "Dumping to tape..."
    onemeg=1048576
    opts="$_dump_debug$dump_args -m -b $onemeg -l0 -f $dumptape -M $media_label -L $session_label $SCRATCH_MNT"
    echo "xfsdump $opts" | _dir_filter
    $XFSDUMP_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}


#
# Do full dump to file
#
_do_dump_file()
{
    _parse_dump_args $*

    echo "Dumping to file..."
    opts="$_dump_debug$dump_args -f $dump_file -M $media_label -L $session_label $SCRATCH_MNT"
    echo "xfsdump $opts" | _dir_filter
    $XFSDUMP_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}

#
# Do full dump to multiple files
#
_do_dump_multi_file()
{
    _parse_dump_args $*

    multi_args=""

    i=0
    while [ $i -lt $multi ]
    do
	multi_args="$multi_args -f $dump_file.$i -M $media_label.$i"
	let i=$i+1
    done

    echo "Dumping to files..."
    opts="$_dump_debug$dump_args $multi_args -L $session_label $SCRATCH_MNT"
    echo "xfsdump $opts" | _dir_filter
    $XFSDUMP_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}


_prepare_restore_dir()
{
    rm -rf $restore_dir
    mkdir $restore_dir || _fail "failed to mkdir $restore_dir"
}


#
# Get tape ready and restore dir
#
_prepare_restore()
{
    _prepare_restore_dir

    echo "Rewinding tape"
    _rewind
}

#
# Restore the tape into $restore_dir
#
_do_restore()
{
    _parse_restore_args $*
    _prepare_restore

    echo "Restoring from tape..."
    opts="$_restore_debug$restore_args -f $dumptape  -L $session_label $restore_dir"
    echo "xfsrestore $opts" | _dir_filter
    $XFSRESTORE_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}

#
# Restore the tape into $restore_dir using -m
#
_do_restore_min()
{
    _parse_restore_args $*
    _prepare_restore

    echo "Restoring from tape..."
    onemeg=1048576
    opts="$_restore_debug$restore_args -m -b $onemeg -f $dumptape  -L $session_label $restore_dir"
    echo "xfsrestore $opts" | _dir_filter
    $XFSRESTORE_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}

#
# Restore the tape from a dump file
#
_do_restore_file()
{
    _parse_restore_args $*
    _prepare_restore_dir

    echo "Restoring from file..."
    opts="$_restore_debug$restore_args -f $dump_file  -L $session_label $restore_dir"
    echo "xfsrestore $opts" | _dir_filter
    $XFSRESTORE_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}

#
# Cumulative restore from a file
# Must call _prepare_restore_dir before the first
# (and only the first) call to this function.
#
_do_restore_file_cum()
{
    _parse_restore_args $*

    echo "Restoring cumumlative from file..."
    opts="$_restore_debug$restore_args -f $dump_file -r $restore_dir"
    echo "xfsrestore $opts" | _dir_filter
    $XFSRESTORE_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}

_do_restore_toc()
{
    _parse_restore_args $*

    echo "Contents of dump ..."
    opts="$_restore_debug$restore_args -f $dump_file -t"
    echo "xfsrestore $opts" | _dir_filter
    cd $SCRATCH_MNT
    $XFSRESTORE_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter_main |\
    _check_quota_file |\
    _check_quota_entries |\
    $AWK_PROG 'NF != 1 { print; next }
	       {files = sprintf("%s\n%s", files, $1)}
		END { print files | "sort" } '
    # the above awk code is to alpha sort only the output
    # of files (and not the verbose restore msgs)
    cd $here # put back
}

#
# Restore the tape from multiple dump files
#
_do_restore_multi_file()
{
    _parse_restore_args $*
    _prepare_restore_dir

    multi_args=""

    i=0
    while [ $i -lt $multi ]
    do
	multi_args="$multi_args -f $dump_file.$i"
	let i=$i+1
    done

    echo "Restoring from file..."
    opts="$_restore_debug$restore_args $multi_args -L $session_label $restore_dir"
    echo "xfsrestore $opts" | _dir_filter
    $XFSRESTORE_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter
}

#
# Do xfsdump piped into xfsrestore - xfsdump | xfsrestore
# Pass dump options in $1 and restore options in $2, if required. e.g.:
#     _do_dump_restore "-o -F" "-R"
#     _do_dump_restore "" "-R"
#
# Use -s as we want to dump and restore to the same xfs partition
#
_do_dump_restore()
{
    _parse_dump_args $1
    _parse_restore_args $2
    _prepare_restore_dir
    echo "xfsdump|xfsrestore ..."
    restore_opts="$_restore_debug$restore_args - $restore_dir"
    dump_opts="$_dump_debug$dump_args -s $dump_sdir - $SCRATCH_MNT"
    echo "xfsdump $dump_opts | xfsrestore $restore_opts" | _dir_filter
    $XFSDUMP_PROG $dump_opts 2>$tmp.dump.mlog | $XFSRESTORE_PROG $restore_opts 2>&1 | tee -a $seqres.full | _dump_filter
    _dump_filter <$tmp.dump.mlog
}

#
# Compare dumped subdirectory with restored dir
# using ls -nR.
# Thus no contents are compared but permissions, sizes,
# owners, etc... are.
#
_ls_compare_sub()
{
    #
    # verify we got back what we dumped
    #
    echo "Comparing listing of dump directory with restore directory"
    ls -nR $dump_dir | tee -a $seqres.full | _ls_filter >$tmp.dump_dir
    ls -nR $restore_dir/$dump_sdir | tee -a $seqres.full | _ls_filter \
    | sed -e "s#$restore_sdir\/##" >$tmp.restore_dir

    diff -bcs $tmp.dump_dir $tmp.restore_dir | sed -e "s#$tmp#TMP#g"
}

#
# filter out the date fields
#
_ls_nodate_filter()
{
    $AWK_PROG 'NF == 9 { print $1, $2, $3, $4, $9 }'
}

#
# _ls_compare_sub but don't compare dates
_ls_nodate_compare_sub()
{
    #
    # verify we got back what we dumped
    #
    echo "Comparing listing of dump directory with restore directory"
    ls -nR $dump_dir | tee -a $seqres.full | _ls_filter | _ls_nodate_filter >$tmp.dump_dir
    ls -nR $restore_dir/$dump_sdir | tee -a $seqres.full | _ls_filter \
    | _ls_nodate_filter | sed -e "s#$restore_sdir\/##" >$tmp.restore_dir

    diff -bcs $tmp.dump_dir $tmp.restore_dir | sed -e "s#$tmp#TMP#g"
}

#
# Compare using recursive diff the files of the dumped
# subdirectory.
# This one will compare the contents.
#
_diff_compare_sub()
{
    echo "Comparing dump directory with restore directory"
    diff -rs $dump_dir $restore_dir/$dump_sdir | _dir_filter
}

_get_eas_on_path()
{
    _path=$1

# Tim - this is the IRIX way...
    # find $_path -exec attr -l {} \; |\
    # awk '{print $9, $2}' |\
    # sed 's/["]//g' |\
    # sort |\
# and this is now the Linux way...
    echo "User names"
    getfattr --absolute-names -Rh -m user $_path |\
    perl -wn -e '
	if (m/^# file: (\S+)/) { $file = $1 }
	elsif (m/^user\.(\w+)/) { print $file, " ",$1,"\n" }' |\
    sort |\
    while read file ea_name; do
	attr -g $ea_name $file
    done

    if [ "$USE_ATTR_SECURE" = yes ]; then
	echo "Security names"
	getfattr --absolute-names -Rh -m security $_path |\
	perl -wn -e '
	    if (m/^# file: (\S+)/) { $file = $1 }
	    elsif (m/^security\.(\w+)/) { print $file, " ",$1,"\n" }' |\
	sort |\
	while read file ea_name; do
	    attr -g $ea_name $file
	done
    fi

    echo "Root names"
    getfattr --absolute-names -Rh -m trusted $_path |\
    perl -wn -e '
	if (m/^# file: (\S+)/) { $file = $1 }
	elsif (m/^trusted\.(\w+)/) { print $file, " ",$1,"\n" }' |\
    sort |\
    while read file ea_name; do
	attr -R -g $ea_name $file
    done
}

#
# Compare the extended attributes of the files/dirs
# b/w the dumped and restore dirs.
#
#
# Attribute "attr5" had a 8 byte value for /spare1/dump.5460/dir:
# Attribute "attr5" had a 8 byte value for /spare1/restore.5460/dump.5460/dir:
#
_diff_compare_eas()
{
    echo "Comparing dump directory with restore directory"
    echo "Looking at the extended attributes (EAs)"
    echo "EAs on dump"
    _get_eas_on_path $dump_dir | tee $seqres.ea1 | _dir_filter
    echo "EAs on restore"
    _get_eas_on_path $restore_dir/$dump_sdir \
    | sed -e "s#$restore_sdir\/##" \
    | tee $seqres.ea2 \
    | _dir_filter
    diff -s $seqres.ea1 $seqres.ea2 | _dir_filter
}


#
# Compare using recursive diff the files of the dumped
# filesystem
#
_diff_compare()
{
    echo "Comparing dump directory with restore directory"
    diff -rs $SCRATCH_MNT $restore_dir | _dir_filter | _check_quota_diff
}

#
# Check out the dump inventory
#
_dump_inventory()
{
    $XFSDUMP_PROG $_dump_debug -I | tee -a $seqres.full | _dump_filter_main
}

#
# Do the xfsinvutil cmd with debug and filters
# Need to set variable: "$middate" to the invutil date
#
_do_invutil()
{
    host=`hostname`
    echo "xfsinvutil $_invutil_debug -M $host:$SCRATCH_MNT \"$middate\" $*" >$seqres.full
    $XFSINVUTIL_PROG $_invutil_debug $* -M $host:$SCRATCH_MNT "$middate" \
    | tee -a $seqres.full | _invutil_filter
}

#
# ensure we can find the user quota msg if user quotas are on
# ensure we can find the group quota msg if group quotas are on
#
_check_quota()
{
    usermsg=$1
    groupmsg=$2
    projectmsg=$3
    uquota=0
    gquota=0
    pquota=0
    $here/src/feature -U $SCRATCH_DEV && uquota=1
    $here/src/feature -G $SCRATCH_DEV && gquota=1
    $here/src/feature -P $SCRATCH_DEV && pquota=1

    $AWK_PROG -v uquota=$uquota -v gquota=$gquota -v pquota=$pquota \
	      -v full=$seqres.full -v usermsg="$usermsg" \
	      -v groupmsg="$groupmsg" -v projectmsg="$projectmsg" '
	$0 ~ projectmsg {
			print "Found project quota:", $0 >>full
			found_pquota = 1
			if (!pquota) {
			    print "Found extra:", $0
			}
			next
	}
	$0 ~ groupmsg {
			print "Found group quota:", $0 >>full
			found_gquota = 1
			if (!gquota) {
			    print "Found extra:", $0
			}
			next
	}
	$0 ~ usermsg {
			print "Found user quota:", $0 >>full
			found_uquota = 1
			if (!uquota) {
			    print "Found extra:", $0
			}
			next
	}
	$0 ~ "Restore Status: INCOMPLETE" {
			incomplete = 1
	}
			{ print }
	END {
		if (uquota && !found_uquota && !incomplete) {
		    print "Missing user quota msg:", usermsg
		}
		if (gquota && !found_gquota && !incomplete) {
		    print "Missing group quota msg:", groupmsg
		}
		if (pquota && !found_pquota && !incomplete) {
		    print "Missing project quota msg:", projectmsg
		}
	}
    '
}

#
# xfsrestore: 3 directories and 40 entries processed
#   $5 = 40
#   num entries needs to be reduced by num quota file(s)
#
_check_quota_entries()
{
    uquota=0
    gquota=0
    pquota=0
    $here/src/feature -U $SCRATCH_DEV && uquota=1
    $here/src/feature -G $SCRATCH_DEV && gquota=1
    $here/src/feature -P $SCRATCH_DEV && pquota=1
    $AWK_PROG -v uquota=$uquota -v gquota=$gquota -v pquota=$pquota '
	/entries processed/ {
		if (uquota) $5--
		if (gquota) $5--
		if (pquota) $5--
	}
	{print}'
}

#
# Look for:
# xfsdump: saving user quota information for: SCRATCH_MNT
# xfsdump: saving group quota information for: SCRATCH_MNT
# xfsdump: saving project quota information for: SCRATCH_MNT
# xfsrestore: user quota information written to ...'
# xfsrestore: group quota information written to ...'
# xfsrestore: project quota information written to ...'
# xfsrestore: use 'xfs_quota' to restore quotas
#
_check_quota_dumprestore()
{
	_check_quota 'user quota information' \
		     'group quota information' \
		     'project quota information' | \
		sed "/xfsrestore:.*use 'xfs_quota' to restore quotas/d"
}

#
# Look for:
# Only in RESTORE_DIR: xfsdump_quotas
# Only in RESTORE_DIR: xfsdump_quotas_group
# Only in RESTORE_DIR: xfsdump_quotas_project
#
_check_quota_diff()
{
   _check_quota 'Only in RESTORE_DIR: xfsdump_quotas' \
	'Only in RESTORE_DIR: xfsdump_quotas_group' \
	'Only in RESTORE_DIR: xfsdump_quotas_proj'
}

#
# Look for the quota file in the output
# Ensure that it is there if it should be
# Filter it out so that the output is always the same
# even with no quotas
#
_check_quota_file()
{
   _check_quota 'xfsdump_quotas' 'xfsdump_quotas_group' 'xfsdump_quotas_proj'
}

_count_dir_files()
{
	local dir=$1

	local ndirs=$(find $dir -type d | wc -l)
	local nents=$(find $dir | wc -l)

	echo "$ndirs directories and $nents entries"
}

_count_dumpdir_files()
{
	_count_dir_files $dump_dir
}

_count_restoredir_files()
{
	_count_dir_files $restore_dir/$dump_sdir
}


# make sure this script returns success
/bin/true