/*
 * Copyright 2016 WebAssembly Community Group participants
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

//
// Removes module elements that are not needed: functions, globals, tags, etc.
// Basically "global dead code elimination" but not just for code.
//
// To do this optimally, we need to consider that an element may be in one of
// three states:
//
//  * No references at all. We can simply remove it.
//  * References, but no uses. We can't remove it, but we can change it (see
//    below).
//  * Uses (which imply references). We must keep it as it is, because it is
//    fully used (e.g. for a function, it is called and may execute).
//
// An example of something with a reference but *not* a use is a RefFunc to a
// function that has no corresponding CallRef to that type. We cannot just
// remove the function, since the RefFunc must refer to an actual entity in the
// IR, but we know it isn't actually used/called, so we can change it - we can
// empty out the body and put an unreachable there, for example. That is, a
// reference forces us to keep something in the IR to be referred to, but only
// a use actually makes us keep its contents as well.
//

#include <memory>
#include <vector>

#include "ir/element-utils.h"
#include "ir/find_all.h"
#include "ir/intrinsics.h"
#include "ir/module-utils.h"
#include "ir/struct-utils.h"
#include "ir/subtypes.h"
#include "ir/table-utils.h"
#include "ir/utils.h"
#include "pass.h"
#include "support/insert_ordered.h"
#include "support/stdckdint.h"
#include "support/utilities.h"
#include "wasm-builder.h"
#include "wasm-traversal.h"
#include "wasm.h"

namespace wasm {

// TODO: remove this alias
using ModuleElementKind = ModuleItemKind;

// An element in the module that we track: a kind (function, global, etc.) + the
// name of the particular element.
using ModuleElement = std::pair<ModuleElementKind, Name>;

// Information from an indirect call: the name of the table, and the heap type.
using IndirectCall = std::pair<Name, HeapType>;

// Visit or walk an expression to find important things. We note them on data
// structures that the caller can then process.
//
// We could in theory merge this class in with Analyzer, allowing us to
// directly apply our findings - that is, rather than add to a data structure,
// then the caller iterates on it and calls a method on them all, we could call
// that method as we go. However, separating the classes is simpler as we need
// different handling in different cases (when scanning for references vs when
// scanning normally, see below).
//
// In theory we could parallelize this class, processing all functions in
// advance, rather than as we go (single-threaded). However, this turns out not
// to be faster in practice (perhaps because the single-threaded approach uses
// less memory).
struct Noter : public PostWalker<Noter, UnifiedExpressionVisitor<Noter>> {
  // We mark both uses and references, and also note specific things that
  // require special handling, like refFuncs.
  std::vector<ModuleElement> used, referenced;
  std::vector<HeapType> callRefTypes;
  std::vector<Name> refFuncs;
  std::vector<StructField> structFields;
  std::vector<IndirectCall> indirectCalls;

  // Note an item on our output data structures.
  void use(ModuleElement element) { used.push_back(element); }
  void reference(ModuleElement element) { referenced.push_back(element); }
  void noteCallRef(HeapType type) { callRefTypes.push_back(type); }
  void noteRefFunc(Name refFunc) { refFuncs.push_back(refFunc); }
  void noteStructField(StructField structField) {
    structFields.push_back(structField);
  }
  void noteIndirectCall(Name table, HeapType type) {
    indirectCalls.push_back({table, type});
  }

  // Generic visitor: Use all the things referenced. This handles e.g. using the
  // table of a table.get. When we do not want such unconditional use, we
  // override (e.g. for call_indirect, we don't want to mark the entire table as
  // used, see below).
  void visitExpression(Expression* curr) {
#define DELEGATE_ID curr->_id

#define DELEGATE_START(id) [[maybe_unused]] auto* cast = curr->cast<id>();

#define DELEGATE_GET_FIELD(id, field) cast->field

#define DELEGATE_FIELD_TYPE(id, field)
#define DELEGATE_FIELD_HEAPTYPE(id, field)
#define DELEGATE_FIELD_CHILD(id, field)
#define DELEGATE_FIELD_OPTIONAL_CHILD(id, field)
#define DELEGATE_FIELD_INT(id, field)
#define DELEGATE_FIELD_LITERAL(id, field)
#define DELEGATE_FIELD_NAME(id, field)
#define DELEGATE_FIELD_SCOPE_NAME_DEF(id, field)
#define DELEGATE_FIELD_SCOPE_NAME_USE(id, field)
#define DELEGATE_FIELD_ADDRESS(id, field)

#define DELEGATE_FIELD_NAME_KIND(id, field, kind)                              \
  if (cast->field.is()) {                                                      \
    use({kind, cast->field});                                                  \
  }

#include "wasm-delegations-fields.def"
  }

  // Specific visitors

  void visitCall(Call* curr) {
    use({ModuleElementKind::Function, curr->target});

    Intrinsics intrinsics(*getModule());
    if (intrinsics.isCallWithoutEffects(curr)) {
      // A call-without-effects receives a function reference and calls it, the
      // same as a CallRef. When we have a flag for non-closed-world, we should
      // handle this automatically by the reference flowing out to an import,
      // which is what binaryen intrinsics look like. For now, to support use
      // cases of a closed world but that also use this intrinsic, handle the
      // intrinsic specifically here. (Without that, the closed world assumption
      // makes us ignore the function ref that flows to an import, so we are not
      // aware that it is actually called.)
      auto* target = curr->operands.back();
      if (auto* refFunc = target->dynCast<RefFunc>()) {
        // We can see exactly where this goes.
        Call call(getModule()->allocator);
        call.target = refFunc->func;
        visitCall(&call);
      } else {
        // All we can see is the type, so do a CallRef of that.
        CallRef callRef(getModule()->allocator);
        callRef.target = target;
        visitCallRef(&callRef);
      }
    } else if (intrinsics.isConfigureAll(curr)) {
      // Every function that configureAll refers to is signature-called. Mark
      // them all as called, as JS can call them.
      for (auto func : intrinsics.getConfigureAllFunctions(curr)) {
        use({ModuleElementKind::Function, func});
      }
    }
  }

  void visitCallIndirect(CallIndirect* curr) {
    // We refer to the table, but may not use all parts of it, that depends on
    // the heap type we call with.
    reference({ModuleElementKind::Table, curr->table});
    noteIndirectCall(curr->table, curr->heapType);
  }

  void visitCallRef(CallRef* curr) {
    // Ignore unreachable code.
    if (!curr->target->type.isRef()) {
      return;
    }

    noteCallRef(curr->target->type.getHeapType());
  }

  void visitRefFunc(RefFunc* curr) { noteRefFunc(curr->func); }

  void visitStructGet(StructGet* curr) {
    if (curr->ref->type == Type::unreachable || curr->ref->type.isNull()) {
      return;
    }
    auto type = curr->ref->type.getHeapType();
    noteStructField(StructField{type, curr->index});
  }

  void visitContNew(ContNew* curr) {
    // The function reference that is passed in here will be called, just as if
    // we were a call_ref, except at a potentially later time.
    if (!curr->func->type.isRef()) {
      return;
    }

    noteCallRef(curr->func->type.getHeapType());
  }
};

// Analyze a module to find what things are referenced and what things are used.
struct Analyzer {
  Module* module;
  const PassOptions& options;

  // The set of all used things we've seen used so far.
  std::unordered_set<ModuleElement> used;

  // Things for whom there is a reference, but may be unused. It is ok for a
  // thing to appear both in |used| and here; we will check |used| first anyhow.
  // (That is, we don't need to be careful to remove things from here if they
  // begin as referenced and later become used; and we don't need to add things
  // to here if they are both used and referenced.)
  std::unordered_set<ModuleElement> referenced;

  // A queue of used module elements that we need to process. These appear in
  // |used|, and the work we do when we pop them from the queue is to look at
  // the things they reach that might become referenced or used.
  std::vector<ModuleElement> moduleQueue;

  // A stack of used expressions to walk. We do *not* use the normal
  // walking mechanism because we need more control. Specifically, we may defer
  // certain walks, such as this:
  //
  //   (struct.new $Foo
  //     (global.get $bar)
  //   )
  //
  // If we walked the child immediately then we would make $bar used. But that
  // global is only used if we actually read that field from the struct. We
  // perform that analysis in readStructFields  unreadStructFieldExprMap, below.
  std::vector<Expression*> expressionQueue;

  // The signatures that we have seen a call_ref for. When we see a RefFunc of a
  // signature in here, we know it is used; otherwise it may only be referred
  // to.
  std::unordered_set<HeapType> calledSignatures;

  // All the RefFuncs we've seen, grouped by heap type. When we see a CallRef of
  // one of the types here, we know all the RefFuncs corresponding to it are
  // potentially used (and also those of subtypes). This is the reverse side of
  // calledSignatures: for a function to be used via a reference, we need the
  // combination of a RefFunc of it as well as a CallRef of that, and we may see
  // them in any order. (Or, if the RefFunc is in a table, we need a
  // CallIndirect, which is handled in the table logic.)
  //
  // After we see a call for a type, we can clear out the entry here for it, as
  // we'll have that type in calledSignatures, and so this contains only
  // RefFuncs that we have not seen a call for yet, hence "uncalledRefFuncMap."
  //
  // We can only do this when assuming a closed world. TODO: In an open world we
  // could carefully track which types actually escape out to exports or
  // imports.
  std::unordered_map<HeapType, std::unordered_set<Name>> uncalledRefFuncMap;

  // Similar to calledSignatures/uncalledRefFuncMap, we store the StructFields
  // we've seen reads from, and also expressions stored in such fields that
  // could be read if ever we see a read of that field in the future. That is,
  // for an expression stored into a struct field to be read, we need to both
  // see that expression written to the field, and see some other place read
  // that field (similar to with functions that we need to see the RefFunc and
  // also a CallRef that can actually call it).
  std::unordered_set<StructField> readStructFields;
  std::unordered_map<StructField, std::vector<Expression*>>
    unreadStructFieldExprMap;

  // Cached table data. Each time we see a new call_indirect form (a table and a
  // type), we must find all the functions that might be called, and their
  // element segments, as those are now reachable. We parse element segments
  // once at the start to build an efficient "flat" data structure for later
  // queries.
  struct FlatTableInfo {
    // Maps each heap type that is in this table to the items it can call: the
    // functions, and their segments. This takes into account subtyping, that
    // is, typeItemMap[foo] includes data for subtypes of foo, so that we just
    // need to read one place.
    std::unordered_map<HeapType, std::unordered_set<Name>> typeFuncs;
    std::unordered_map<HeapType, std::unordered_set<Name>> typeElems;
  };
  std::unordered_map<Name, FlatTableInfo> flatTableInfoMap;

  Analyzer(Module* module,
           const PassOptions& options,
           const std::vector<ModuleElement>& roots)
    : module(module), options(options) {

    prepare();

    // All roots are used.
    for (auto& element : roots) {
      use(element);
    }

    // Main loop on both the module and the expression queues.
    while (processExpressions() || processModule()) {
    }
  }

  void prepare() {
    for (auto& elem : module->elementSegments) {
      if (!elem->table) {
        continue;
      }
      auto& flatTableInfo = flatTableInfoMap[elem->table];
      for (auto* item : elem->data) {
        if (auto* refFunc = item->dynCast<RefFunc>()) {
          auto* func = module->getFunction(refFunc->func);
          std::optional<HeapType> type = func->type.getHeapType();
          // Add this function and element to all relevant types: each function
          // might be called by its type, or a supertype.
          while (type) {
            flatTableInfo.typeFuncs[*type].insert(func->name);
            flatTableInfo.typeElems[*type].insert(elem->name);
            type = type->getSuperType();
          }
        }
      }
    }
  }

  // Process expressions in the expression queue while we have any, visiting
  // them (using their contents) and adding children. Returns whether we did any
  // work.
  bool processExpressions() {
    bool worked = false;
    while (expressionQueue.size()) {
      worked = true;

      auto* curr = expressionQueue.back();
      expressionQueue.pop_back();

      // Find references in this expression, and apply them. Anything found here
      // is used.
      Noter noter;
      noter.setModule(module);
      noter.visit(curr);
      for (auto element : noter.used) {
        use(element);
      }
      for (auto element : noter.referenced) {
        reference(element);
      }
      for (auto type : noter.callRefTypes) {
        useCallRefType(type);
      }
      for (auto func : noter.refFuncs) {
        useRefFunc(func);
      }
      for (auto structField : noter.structFields) {
        useStructField(structField);
      }
      for (auto call : noter.indirectCalls) {
        useIndirectCall(call);
      }

      // Scan the children to continue our work.
      scanChildren(curr);
    }
    return worked;
  }

  // We'll compute SubTypes if we need them.
  std::optional<SubTypes> subTypes;

  void useCallRefType(HeapType type) {
    if (type.isBasic()) {
      // Nothing to do for something like a bottom type; attempts to call such a
      // type will trap at runtime.
      return;
    }

    if (!subTypes) {
      subTypes = SubTypes(*module);
    }

    // Call all the functions of that signature, and subtypes. We can then
    // forget about them, as those signatures will be marked as called.
    for (auto subType : subTypes->getSubTypes(type)) {
      auto iter = uncalledRefFuncMap.find(subType);
      if (iter != uncalledRefFuncMap.end()) {
        // We must not have a type in both calledSignatures and
        // uncalledRefFuncMap: once it is called, we do not track RefFuncs for
        // it any more.
        assert(calledSignatures.count(subType) == 0);

        for (Name target : iter->second) {
          use({ModuleElementKind::Function, target});
        }

        uncalledRefFuncMap.erase(iter);
      }

      calledSignatures.insert(subType);
    }
  }

  std::unordered_set<IndirectCall> usedIndirectCalls;

  std::optional<TableUtils::TableInfoMap> tableInfoMap;

  void useIndirectCall(IndirectCall call) {
    auto [_, inserted] = usedIndirectCalls.insert(call);
    if (!inserted) {
      return;
    }

    auto [table, type] = call;

    // Find callable functions and segments.
    for (auto& func : flatTableInfoMap[table].typeFuncs[type]) {
      use({ModuleElementKind::Function, func});
    }
    for (auto& elem : flatTableInfoMap[table].typeElems[type]) {
      reference({ModuleElementKind::ElementSegment, elem});
    }

    // Note a possible call of a function reference as well, if something else
    // might be written into the table during runtime.
    // TODO: Add an option for immutable initial content like Directize?
    if (!tableInfoMap) {
      tableInfoMap = TableUtils::computeTableInfo(*module);
    }
    if ((*tableInfoMap)[table].mayBeModified) {
      useCallRefType(type);
    }
  }

  void useRefFunc(Name func) {
    if (!options.closedWorld) {
      // The world is open, so assume the worst and something (inside or outside
      // of the module) can call this.
      use({ModuleElementKind::Function, func});
      return;
    }

    // Otherwise, we are in a closed world, and so we can try to optimize the
    // case where the target function is referenced but not used.
    auto element = ModuleElement{ModuleElementKind::Function, func};

    auto type = module->getFunction(func)->type.getHeapType();
    if (calledSignatures.count(type)) {
      // We must not have a type in both calledSignatures and
      // uncalledRefFuncMap: once it is called, we do not track RefFuncs for it
      // any more.
      assert(uncalledRefFuncMap.count(type) == 0);

      // We've seen a RefFunc for this, so it is used.
      use(element);
    } else {
      // We've never seen a CallRef for this, but might see one later.
      uncalledRefFuncMap[type].insert(func);

      reference(element);
    }
  }

  void useStructField(StructField structField) {
    if (!readStructFields.count(structField)) {
      // Avoid a structured binding as the C++ spec does not allow capturing
      // them in lambdas, which we need below.
      auto type = structField.first;
      auto index = structField.second;

      // This is the first time we see a read of this data. Note that it is
      // read, and also all subtypes since we might be reading from them as
      // well.
      if (!subTypes) {
        subTypes = SubTypes(*module);
      }
      subTypes->iterSubTypes(type, [&](HeapType subType, Index depth) {
        auto subStructField = StructField{subType, index};
        readStructFields.insert(subStructField);

        // Walk all the unread data we've queued: we queued it for the
        // possibility of it ever being read, which just happened.
        auto iter = unreadStructFieldExprMap.find(subStructField);
        if (iter != unreadStructFieldExprMap.end()) {
          for (auto* expr : iter->second) {
            use(expr);
          }
        }
        unreadStructFieldExprMap.erase(subStructField);
      });
    }
  }

  // As processExpressions, but for module elements.
  bool processModule() {
    bool worked = false;
    while (moduleQueue.size()) {
      worked = true;

      auto curr = moduleQueue.back();
      moduleQueue.pop_back();

      assert(used.count(curr));
      auto& [kind, value] = curr;
      switch (kind) {
        case ModuleElementKind::Function: {
          // if not an import, walk it
          auto* func = module->getFunction(value);
          if (!func->imported()) {
            use(func->body);
          }
          break;
        }
        case ModuleElementKind::Global: {
          // if not imported, it has an init expression we can walk
          auto* global = module->getGlobal(value);
          if (!global->imported()) {
            use(global->init);
          }
          break;
        }
        case ModuleElementKind::Tag:
          break;
        case ModuleElementKind::Memory:
          ModuleUtils::iterMemorySegments(
            *module, value, [&](DataSegment* segment) {
              if (!segment->data.empty()) {
                use({ModuleElementKind::DataSegment, segment->name});
              }
            });
          break;
        case ModuleElementKind::Table:
          ModuleUtils::iterTableSegments(
            *module, value, [&](ElementSegment* segment) {
              if (!segment->data.empty()) {
                use({ModuleElementKind::ElementSegment, segment->name});
              }
            });
          break;
        case ModuleElementKind::DataSegment: {
          auto* segment = module->getDataSegment(value);
          if (segment->offset) {
            use(segment->offset);
            use({ModuleElementKind::Memory, segment->memory});
          }
          break;
        }
        case ModuleElementKind::ElementSegment: {
          auto* segment = module->getElementSegment(value);
          if (segment->offset) {
            use(segment->offset);
            use({ModuleElementKind::Table, segment->table});
          }
          for (auto* expr : segment->data) {
            use(expr);
          }
          break;
        }
        default: {
          WASM_UNREACHABLE("invalid kind");
        }
      }
    }
    return worked;
  }

  // Mark something as used, if it hasn't already been, and if so add it to the
  // queue so we can process the things it can reach.
  void use(ModuleElement element) {
    auto [_, inserted] = used.emplace(element);
    if (inserted) {
      moduleQueue.emplace_back(element);
    }
  }
  void use(ModuleElementKind kind, Name value) {
    use(ModuleElement(kind, value));
  }

  void use(Expression* curr) {
    // For expressions we do not need to check if they have already been seen:
    // the tree structure guarantees that traversing children, recursively, will
    // only visit each expression once, since each expression has a single
    // parent.
    expressionQueue.emplace_back(curr);
  }

  // Add the children of a used expression to be walked, if we should do so.
  void scanChildren(Expression* curr) {
    // For now, the only special handling we have is fields of struct.new, which
    // we defer walking of to when we know there is a read that can actually
    // read them, see comments above on |expressionQueue|. We can only do that
    // optimization in closed world (as otherwise the field might be read
    // outside of the code we can see), and when it is reached (if it's
    // unreachable then we don't know the type, and can defer that to DCE to
    // remove).
    if (!options.closedWorld || curr->type == Type::unreachable ||
        !curr->is<StructNew>()) {
      for (auto* child : ChildIterator(curr)) {
        use(child);
      }
      return;
    }

    auto* new_ = curr->cast<StructNew>();

    // Use the descriptor right now, normally. We only have special
    // optimization for struct.new operands, below, because this is not needed
    // for descriptors: a descriptor must be a struct, and our "lazy reading"
    // optimization operates on it (if it could be a function, then we'd need to
    // do more here). In other words, descriptor reads always have a struct "in
    // the middle", that we can optimize, like here:
    //
    //  (struct.new $A
    //    (ref.func $c)
    //    (struct.new $A.desc
    //      (ref.func $d)
    //    )
    //  )
    //
    // The struct has a ref.func on it, and the descriptor as well. Say we never
    // read field 0 from $A, then we can avoid marking $c as reached; this is
    // the usual struct optimization we do, below. Now, say we never read the
    // descriptor, then we also never read field 0 from $A.desc, that is, the
    // usual struct optimization on the descriptor class is enough for us to
    // avoid marking $d as reached.
    if (new_->desc) {
      use(new_->desc);
    }

    auto type = new_->type.getHeapType();

    for (Index i = 0; i < new_->operands.size(); i++) {
      auto* operand = new_->operands[i];
      auto structField = StructField{type, i};

      // If this struct field has already been read, then we should use the
      // contents there now.
      auto useOperandNow = readStructFields.count(structField);

      // Side effects are tricky to reason about - the side effects must happen
      // even if we never read the struct field - so give up and consider it
      // used.
      if (!useOperandNow) {
        useOperandNow =
          EffectAnalyzer(options, *module, operand).hasSideEffects();
      }

      // We must handle the call.without.effects intrinsic here in a special
      // manner. That intrinsic is reported as having no side effects in
      // EffectAnalyzer, but even though for optimization purposes we can ignore
      // effects, the called code *is* actually reached, and it might have side
      // effects. In other words, the point of the intrinsic is to temporarily
      // ignore those effects during one phase of optimization. Or, put another
      // way, the intrinsic lets us ignore the effects of computing some value,
      // but we do still need to compute that value if it is received and used
      // (if it is not received and used, other passes will remove it).
      if (!useOperandNow) {
        // To detect this, look for any call. A non-intrinsic call would have
        // already been detected when we looked for side effects, so this will
        // only notice intrinsic calls.
        useOperandNow = !FindAll<Call>(operand).list.empty();
      }

      if (useOperandNow) {
        use(operand);
      } else {
        // This data does not need to be read now, but might be read later. Note
        // it as unread.
        unreadStructFieldExprMap[structField].push_back(operand);

        // We also must note that anything in this operand is referenced, even
        // if it never ends up used, so the IR remains valid.
        addReferences(operand);
      }
    }
  }

  // Add references to all things appearing in an expression. This is called
  // when we know an expression will appear in the output, which means it must
  // remain valid IR and not refer to nonexistent things.
  //
  // This is only called on things without side effects (if there are such
  // effects then we would have had to assume the worst earlier, and not get
  // here).
  void addReferences(Expression* curr) {
    // Find references anywhere in this expression so we can apply them.
    Noter noter;
    noter.setModule(module);
    noter.walk(curr);

    for (auto element : noter.used) {
      reference(element);
    }
    for (auto element : noter.referenced) {
      reference(element);
    }

    for (auto func : noter.refFuncs) {
      // If a function ends up referenced but not used then later down we will
      // empty it out by replacing its body with an unreachable, which always
      // validates. For that reason all we need to do here is mark the function
      // as referenced - we don't need to do anything with the body.
      //
      // Note that it is crucial that we do not call useRefFunc() here: we are
      // just adding a reference to the function, and not actually using the
      // RefFunc. (Only useRefFunc() + a CallRef of the proper type are enough
      // to make a function itself used.)
      reference({ModuleElementKind::Function, func});
    }

    // Note: nothing to do with |callRefTypes| and |structFields|, which only
    // involve types. This function only cares about references to module
    // elements like functions, globals, and tables. (References to types are
    // handled in an entirely different way in Binaryen IR, and we don't need to
    // worry about it.)
  }

  void reference(ModuleElement element) {
    // Avoid repeated work. Note that globals with multiple references to
    // previous globals can lead to exponential work, so this is important.
    // (If C refers twice to B, and B refers twice to A, then when we process
    // C we would, naively, scan B twice and A four times.)
    auto [_, inserted] = referenced.insert(element);
    if (!inserted) {
      return;
    }

    // Some references force references to their internals, just by being
    // referenced and present in the output.
    auto& [kind, value] = element;
    if (kind == ModuleElementKind::Global) {
      // Like functions, (non-imported) globals have contents. For functions,
      // things are simple: if a function ends up with references but no uses
      // then we can simply empty out the function (by setting its body to an
      // unreachable). We don't have a simple way to do the same for globals,
      // unfortunately. For now, scan the global's contents and add references
      // as needed.
      // TODO: We could try to empty the global out, for example, replace it
      //       with a null if it is nullable, or replace all gets of it with
      //       something else, but that is not trivial.
      auto* global = module->getGlobal(value);
      if (!global->imported()) {
        // Note that infinite recursion is not a danger here since a global
        // can only refer to previous globals.
        addReferences(global->init);
      }
    } else if (kind == ModuleElementKind::ElementSegment) {
      // TODO: We could empty out parts of the segment we don't need.
      auto* segment = module->getElementSegment(value);
      for (auto* item : segment->data) {
        addReferences(item);
      }
    }
  }
};

struct RemoveUnusedModuleElements : public Pass {
  // This pass only removes module elements, it never modifies function
  // contents (except to replace an entire body with unreachable, which does not
  // cause any need for local fixups).
  bool requiresNonNullableLocalFixups() override { return false; }

  bool rootAllFunctions;

  RemoveUnusedModuleElements(bool rootAllFunctions)
    : rootAllFunctions(rootAllFunctions) {}

  void run(Module* module) override {
    prepare(module);

    std::vector<ModuleElement> roots;
    // Module start is a root.
    if (module->start.is()) {
      auto startFunction = module->getFunction(module->start);
      // Can be skipped if the start function is empty.
      if (!startFunction->imported() && startFunction->body->is<Nop>()) {
        module->start = Name{};
      } else {
        roots.emplace_back(ModuleElementKind::Function, module->start);
      }
    }
    // If told to, root all the functions.
    if (rootAllFunctions) {
      ModuleUtils::iterDefinedFunctions(*module, [&](Function* func) {
        roots.emplace_back(ModuleElementKind::Function, func->name);
      });
    }
    // Exports are roots.
    for (auto& curr : module->exports) {
      if (curr->kind == ExternalKind::Function) {
        roots.emplace_back(ModuleElementKind::Function,
                           *curr->getInternalName());
      } else if (curr->kind == ExternalKind::Global) {
        roots.emplace_back(ModuleElementKind::Global, *curr->getInternalName());
      } else if (curr->kind == ExternalKind::Tag) {
        roots.emplace_back(ModuleElementKind::Tag, *curr->getInternalName());
      } else if (curr->kind == ExternalKind::Table) {
        roots.emplace_back(ModuleElementKind::Table, *curr->getInternalName());
      } else if (curr->kind == ExternalKind::Memory) {
        roots.emplace_back(ModuleElementKind::Memory, *curr->getInternalName());
      }
    }

    // Active segments that write to imported tables and memories are roots
    // because those writes are externally observable even if the module does
    // not otherwise use the tables or memories.
    //
    // Likewise, if traps are possible during startup then just trapping is an
    // effect (which can happen if the offset is out of bounds).
    auto maybeRootSegment = [&](ModuleElementKind kind,
                                Name segmentName,
                                Index segmentSize,
                                Expression* offset,
                                Importable* parent,
                                Index parentSize) {
      auto writesToVisible = parent->imported() && segmentSize;
      auto mayTrap = false;
      if (!getPassOptions().trapsNeverHappen) {
        // Check if this might trap. If it is obviously in bounds then it
        // cannot.
        auto* c = offset->dynCast<Const>();
        // Check for overflow in the largest possible space of addresses.
        using AddressType = Address::address64_t;
        AddressType maxWritten;
        // If there is no integer, or if there is and the addition overflows, or
        // if the addition leads to a too-large value, then we may trap.
        mayTrap = !c ||
                  std::ckd_add(&maxWritten,
                               (AddressType)segmentSize,
                               (AddressType)c->value.getInteger()) ||
                  maxWritten > parentSize;
      }
      if (writesToVisible || mayTrap) {
        roots.emplace_back(kind, segmentName);
      }
    };
    ModuleUtils::iterActiveDataSegments(*module, [&](DataSegment* segment) {
      if (segment->memory.is()) {
        auto* memory = module->getMemory(segment->memory);
        maybeRootSegment(ModuleElementKind::DataSegment,
                         segment->name,
                         segment->data.size(),
                         segment->offset,
                         memory,
                         memory->initial * Memory::kPageSize);
      }
    });
    ModuleUtils::iterActiveElementSegments(
      *module, [&](ElementSegment* segment) {
        if (segment->table.is()) {
          auto* table = module->getTable(segment->table);
          maybeRootSegment(ModuleElementKind::ElementSegment,
                           segment->name,
                           segment->data.size(),
                           segment->offset,
                           table,
                           table->initial * Table::kPageSize);
        }
      });

    // Just as out-of-bound segments may cause observable traps at instantiation
    // time, so can struct.new instructions with null descriptors cause traps in
    // global or element segment initializers.
    if (!getPassOptions().trapsNeverHappen) {
      for (auto& segment : module->elementSegments) {
        for (auto* init : segment->data) {
          if (isMaybeTrappingInit(*module, init)) {
            roots.emplace_back(ModuleElementKind::ElementSegment,
                               segment->name);
            break;
          }
        }
      }
      for (auto& global : module->globals) {
        if (auto* init = global->init;
            init && isMaybeTrappingInit(*module, init)) {
          roots.emplace_back(ModuleElementKind::Global, global->name);
        }
      }
    }

    // Analyze the module.
    auto& options = getPassOptions();
    Analyzer analyzer(module, options, roots);

    // Remove unneeded elements.
    auto needed = [&](ModuleElement element) {
      // We need to emit something in the output if it has either a reference or
      // a use. Situations where we can do better (for the case of a reference
      // without any use) are handled separately below.
      return analyzer.used.count(element) || analyzer.referenced.count(element);
    };

    module->removeFunctions([&](Function* curr) {
      auto element = ModuleElement{ModuleElementKind::Function, curr->name};
      if (analyzer.used.count(element)) {
        // This is used.
        return false;
      }

      if (analyzer.referenced.count(element)) {
        // This is not used, but has a reference. See comment above on
        // uncalledRefFuncs.
        if (!curr->imported()) {
          curr->body = Builder(*module).makeUnreachable();
        }
        return false;
      }

      // The function is not used or referenced; remove it entirely.
      return true;
    });
    module->removeGlobals([&](Global* curr) {
      // See TODO in addReferences - we may be able to do better here.
      return !needed({ModuleElementKind::Global, curr->name});
    });
    module->removeTags([&](Tag* curr) {
      return !needed({ModuleElementKind::Tag, curr->name});
    });
    module->removeMemories([&](Memory* curr) {
      return !needed(ModuleElement(ModuleElementKind::Memory, curr->name));
    });
    module->removeTables([&](Table* curr) {
      return !needed(ModuleElement(ModuleElementKind::Table, curr->name));
    });
    module->removeDataSegments([&](DataSegment* curr) {
      return !needed(ModuleElement(ModuleElementKind::DataSegment, curr->name));
    });
    module->removeElementSegments([&](ElementSegment* curr) {
      return !needed({ModuleElementKind::ElementSegment, curr->name});
    });
    // TODO: After removing elements, we may be able to remove more things, and
    //       should continue to work. (For example, after removing a reference
    //       to a function from an element segment, we may be able to remove
    //       that function, etc.)
  }

  // Do simple work that prepares the module to be efficiently optimized.
  void prepare(Module* module) {
    // FIXME Disable these optimizations for now, as they uncovered bugs in
    //       both LLVM and Binaryen,
    //       https://github.com/WebAssembly/binaryen/pull/6026#issuecomment-1775674882
    return;

    // If a function export is a function that just calls another function, we
    // can export that one directly. Doing so might make the function in the
    // middle unused:
    //
    //  (export "export" (func $middle))
    //  (func $middle
    //    (call $real)
    //  )
    //
    // =>
    //
    //  (export "export" (func $real))  ;; this changed
    //  (func $middle
    //    (call $real)
    //  )
    //
    // (Normally this is not needed, as inlining will end up removing such
    // silly trampoline functions, but the case of an import being exported does
    // not have any code for inlining to work with, so we need to handle it
    // directly.)
    for (auto& exp : module->exports) {
      if (exp->kind != ExternalKind::Function) {
        continue;
      }

      auto* name = exp->getInternalName();
      auto* func = module->getFunction(*name);
      if (!func->body) {
        continue;
      }

      auto* call = func->body->dynCast<Call>();
      if (!call) {
        continue;
      }

      // Don't do this if the type is different, as then we might be
      // changing the external interface to the module.
      auto* calledFunc = module->getFunction(call->target);
      if (calledFunc->type != func->type) {
        continue;
      }

      // Finally, all the params must simply be forwarded.
      auto ok = true;
      for (Index i = 0; i < call->operands.size(); i++) {
        auto* get = call->operands[i]->dynCast<LocalGet>();
        if (!get || get->index != i) {
          ok = false;
          break;
        }
      }
      if (ok) {
        *name = calledFunc->name;
      }
    }
  }

  bool isMaybeTrappingInit(Module& wasm, Expression* root) {
    // Traverse the expression, looking for nullable descriptors passed to
    // struct.new. The descriptors might be null, which is the only situations
    // (beyond exceeded implementation limits, which we don't model) that can
    // lead a constant expression to trap. We depend on other optimizations to
    // make the descriptors non-nullable if we can determine that they are not
    // null.
    struct NullDescFinder : PostWalker<NullDescFinder> {
      bool mayTrap = false;
      void visitStructNew(StructNew* curr) {
        if (curr->desc && curr->desc->type.isNullable()) {
          mayTrap = true;
        }
      }
    };

    NullDescFinder finder;
    finder.walk(root);
    return finder.mayTrap;
  }
};

Pass* createRemoveUnusedModuleElementsPass() {
  return new RemoveUnusedModuleElements(false);
}

Pass* createRemoveUnusedNonFunctionModuleElementsPass() {
  return new RemoveUnusedModuleElements(true);
}

} // namespace wasm