| // -*- Mode: C++; c-basic-offset: 2; indent-tabs-mode: nil -*- |
| // Copyright (c) 2005, Google Inc. |
| // All rights reserved. |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: |
| // |
| // * Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // * Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following disclaimer |
| // in the documentation and/or other materials provided with the |
| // distribution. |
| // * Neither the name of Google Inc. nor the names of its |
| // contributors may be used to endorse or promote products derived from |
| // this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| // --- |
| // Unittest for the TCMalloc implementation. |
| // |
| // * The test consists of a set of threads. |
| // * Each thread maintains a set of allocated objects, with |
| // a bound on the total amount of data in the set. |
| // * Each allocated object's contents are generated by |
| // hashing the object pointer, and a generation count |
| // in the object. This allows us to easily check for |
| // data corruption. |
| // * At any given step, the thread can do any of the following: |
| // a. Allocate an object |
| // b. Increment an object's generation count and update |
| // its contents. |
| // c. Pass the object to another thread |
| // d. Free an object |
| // Also, at the end of every step, object(s) are freed to maintain |
| // the memory upper-bound. |
| // |
| // If this test is compiled with -DDEBUGALLOCATION, then we don't |
| // run some tests that test the inner workings of tcmalloc and |
| // break on debugallocation: that certain allocations are aligned |
| // in a certain way (even though no standard requires it), and that |
| // realloc() tries to minimize copying (which debug allocators don't |
| // care about). |
| |
| #include "config_for_unittests.h" |
| // Complicated ordering requirements. tcmalloc.h defines (indirectly) |
| // _POSIX_C_SOURCE, which it needs so stdlib.h defines posix_memalign. |
| // unistd.h, on the other hand, requires _POSIX_C_SOURCE to be unset, |
| // at least on FreeBSD, in order to define sbrk. The solution |
| // is to #include unistd.h first. This is safe because unistd.h |
| // doesn't sub-include stdlib.h, so we'll still get posix_memalign |
| // when we #include stdlib.h. Blah. |
| #ifdef HAVE_UNISTD_H |
| #include <unistd.h> // for testing sbrk hooks |
| #endif |
| #include "tcmalloc.h" // must come early, to pick up posix_memalign |
| #include <stdlib.h> |
| #include <string.h> |
| #include <stdio.h> |
| #include <stdint.h> // for intptr_t |
| #include <sys/types.h> // for size_t |
| #ifdef HAVE_FCNTL_H |
| #include <fcntl.h> // for open; used with mmap-hook test |
| #endif |
| #ifdef HAVE_MALLOC_H |
| #include <malloc.h> // defines pvalloc/etc on cygwin |
| #endif |
| #include <assert.h> |
| #include <vector> |
| #include <algorithm> |
| #include <string> |
| #include <new> |
| #include "base/logging.h" |
| #include "base/simple_mutex.h" |
| #include "gperftools/malloc_hook.h" |
| #include "gperftools/malloc_extension.h" |
| #include "gperftools/nallocx.h" |
| #include "gperftools/tcmalloc.h" |
| #include "thread_cache.h" |
| #include "system-alloc.h" |
| #include "tests/testutil.h" |
| |
| // Windows doesn't define pvalloc and a few other obsolete unix |
| // functions; nor does it define posix_memalign (which is not obsolete). |
| #if defined(_WIN32) |
| # define cfree free // don't bother to try to test these obsolete fns |
| # define valloc malloc |
| # define pvalloc malloc |
| // I'd like to map posix_memalign to _aligned_malloc, but _aligned_malloc |
| // must be paired with _aligned_free (not normal free), which is too |
| // invasive a change to how we allocate memory here. So just bail |
| static bool kOSSupportsMemalign = false; |
| static inline void* Memalign(size_t align, size_t size) { |
| //LOG(FATAL) << "memalign not supported on windows"; |
| exit(1); |
| return NULL; |
| } |
| static inline int PosixMemalign(void** ptr, size_t align, size_t size) { |
| //LOG(FATAL) << "posix_memalign not supported on windows"; |
| exit(1); |
| return -1; |
| } |
| |
| // OS X defines posix_memalign in some OS versions but not others; |
| // it's confusing enough to check that it's easiest to just not to test. |
| #elif defined(__APPLE__) |
| static bool kOSSupportsMemalign = false; |
| static inline void* Memalign(size_t align, size_t size) { |
| //LOG(FATAL) << "memalign not supported on OS X"; |
| exit(1); |
| return NULL; |
| } |
| static inline int PosixMemalign(void** ptr, size_t align, size_t size) { |
| //LOG(FATAL) << "posix_memalign not supported on OS X"; |
| exit(1); |
| return -1; |
| } |
| |
| #else |
| static bool kOSSupportsMemalign = true; |
| static inline void* Memalign(size_t align, size_t size) { |
| return noopt(memalign(align, noopt(size))); |
| } |
| static inline int PosixMemalign(void** ptr, size_t align, size_t size) { |
| return noopt(posix_memalign(ptr, align, noopt(size))); |
| } |
| |
| #endif |
| |
| #if defined(ENABLE_ALIGNED_NEW_DELETE) |
| |
| #define OVERALIGNMENT 64 |
| |
| struct overaligned_type |
| { |
| #if defined(__GNUC__) |
| __attribute__((__aligned__(OVERALIGNMENT))) |
| #elif defined(_MSC_VER) |
| __declspec(align(OVERALIGNMENT)) |
| #else |
| alignas(OVERALIGNMENT) |
| #endif |
| unsigned char data[OVERALIGNMENT * 2]; // make the object size different from |
| // alignment to make sure the correct |
| // values are passed to the new/delete |
| // implementation functions |
| }; |
| |
| #endif // defined(ENABLE_ALIGNED_NEW_DELETE) |
| |
| // On systems (like freebsd) that don't define MAP_ANONYMOUS, use the old |
| // form of the name instead. |
| #ifndef MAP_ANONYMOUS |
| # define MAP_ANONYMOUS MAP_ANON |
| #endif |
| |
| #define LOGSTREAM stdout |
| |
| using std::vector; |
| using std::string; |
| |
| DECLARE_double(tcmalloc_release_rate); |
| DECLARE_int32(max_free_queue_size); // in debugallocation.cc |
| DECLARE_int64(tcmalloc_sample_parameter); |
| |
| struct OOMAbleSysAlloc : public SysAllocator { |
| SysAllocator *child; |
| int simulate_oom; |
| |
| void* Alloc(size_t size, size_t* actual_size, size_t alignment) { |
| if (simulate_oom) { |
| return NULL; |
| } |
| return child->Alloc(size, actual_size, alignment); |
| } |
| }; |
| |
| static union { |
| char buf[sizeof(OOMAbleSysAlloc)]; |
| void *ptr; |
| } test_sys_alloc_space; |
| |
| static OOMAbleSysAlloc* get_test_sys_alloc() { |
| return reinterpret_cast<OOMAbleSysAlloc*>(&test_sys_alloc_space); |
| } |
| |
| void setup_oomable_sys_alloc() { |
| SysAllocator *def = MallocExtension::instance()->GetSystemAllocator(); |
| |
| OOMAbleSysAlloc *alloc = get_test_sys_alloc(); |
| new (alloc) OOMAbleSysAlloc; |
| alloc->child = def; |
| |
| MallocExtension::instance()->SetSystemAllocator(alloc); |
| } |
| |
| namespace testing { |
| |
| static const int FLAGS_numtests = 50000; |
| static const int FLAGS_log_every_n_tests = 50000; // log exactly once |
| |
| // Testing parameters |
| static const int FLAGS_lgmaxsize = 16; // lg() of the max size object to alloc |
| static const int FLAGS_numthreads = 10; // Number of threads |
| static const int FLAGS_threadmb = 4; // Max memory size allocated by thread |
| static const int FLAGS_lg_max_memalign = 18; // lg of max alignment for memalign |
| |
| static const double FLAGS_memalign_min_fraction = 0; // min expected% |
| static const double FLAGS_memalign_max_fraction = 0.4; // max expected% |
| static const double FLAGS_memalign_max_alignment_ratio = 6; // alignment/size |
| |
| // Weights of different operations |
| static const int FLAGS_allocweight = 50; // Weight for picking allocation |
| static const int FLAGS_freeweight = 50; // Weight for picking free |
| static const int FLAGS_updateweight = 10; // Weight for picking update |
| static const int FLAGS_passweight = 1; // Weight for passing object |
| |
| static const int kSizeBits = 8 * sizeof(size_t); |
| static const size_t kMaxSize = ~static_cast<size_t>(0); |
| static const size_t kMaxSignedSize = ((size_t(1) << (kSizeBits-1)) - 1); |
| |
| static const size_t kNotTooBig = 100000; |
| // We want an allocation that is definitely more than main memory. OS |
| // X has special logic to discard very big allocs before even passing |
| // the request along to the user-defined memory allocator; we're not |
| // interested in testing their logic, so we have to make sure we're |
| // not *too* big. |
| static const size_t kTooBig = kMaxSize - 100000; |
| |
| static int news_handled = 0; |
| |
| // Global array of threads |
| class TesterThread; |
| static TesterThread** threads; |
| |
| // To help with generating random numbers |
| class TestHarness { |
| private: |
| // Information kept per type |
| struct Type { |
| string name; |
| int type; |
| int weight; |
| }; |
| |
| public: |
| TestHarness(int seed) |
| : types_(new vector<Type>), total_weight_(0), num_tests_(0) { |
| srandom(seed); |
| } |
| ~TestHarness() { |
| delete types_; |
| } |
| |
| // Add operation type with specified weight. When starting a new |
| // iteration, an operation type is picked with probability |
| // proportional to its weight. |
| // |
| // "type" must be non-negative. |
| // "weight" must be non-negative. |
| void AddType(int type, int weight, const char* name); |
| |
| // Call this to get the type of operation for the next iteration. |
| // It returns a random operation type from the set of registered |
| // operations. Returns -1 if tests should finish. |
| int PickType(); |
| |
| // If n == 0, returns the next pseudo-random number in the range [0 .. 0] |
| // If n != 0, returns the next pseudo-random number in the range [0 .. n) |
| int Uniform(int n) { |
| if (n == 0) { |
| return random() * 0; |
| } else { |
| return random() % n; |
| } |
| } |
| // Pick "base" uniformly from range [0,max_log] and then return |
| // "base" random bits. The effect is to pick a number in the range |
| // [0,2^max_log-1] with bias towards smaller numbers. |
| int Skewed(int max_log) { |
| const int base = random() % (max_log+1); |
| return random() % (1 << base); |
| } |
| |
| private: |
| vector<Type>* types_; // Registered types |
| int total_weight_; // Total weight of all types |
| int num_tests_; // Num tests run so far |
| }; |
| |
| void TestHarness::AddType(int type, int weight, const char* name) { |
| Type t; |
| t.name = name; |
| t.type = type; |
| t.weight = weight; |
| types_->push_back(t); |
| total_weight_ += weight; |
| } |
| |
| int TestHarness::PickType() { |
| if (num_tests_ >= FLAGS_numtests) return -1; |
| num_tests_++; |
| |
| assert(total_weight_ > 0); |
| // This is a little skewed if total_weight_ doesn't divide 2^31, but it's close |
| int v = Uniform(total_weight_); |
| int i; |
| for (i = 0; i < types_->size(); i++) { |
| v -= (*types_)[i].weight; |
| if (v < 0) { |
| break; |
| } |
| } |
| |
| assert(i < types_->size()); |
| if ((num_tests_ % FLAGS_log_every_n_tests) == 0) { |
| fprintf(LOGSTREAM, " Test %d out of %d: %s\n", |
| num_tests_, FLAGS_numtests, (*types_)[i].name.c_str()); |
| } |
| return (*types_)[i].type; |
| } |
| |
| class AllocatorState : public TestHarness { |
| public: |
| explicit AllocatorState(int seed) : TestHarness(seed), memalign_fraction_(0) { |
| if (kOSSupportsMemalign) { |
| CHECK_GE(FLAGS_memalign_max_fraction, 0); |
| CHECK_LE(FLAGS_memalign_max_fraction, 1); |
| CHECK_GE(FLAGS_memalign_min_fraction, 0); |
| CHECK_LE(FLAGS_memalign_min_fraction, 1); |
| double delta = FLAGS_memalign_max_fraction - FLAGS_memalign_min_fraction; |
| CHECK_GE(delta, 0); |
| memalign_fraction_ = (Uniform(10000)/10000.0 * delta + |
| FLAGS_memalign_min_fraction); |
| //fprintf(LOGSTREAM, "memalign fraction: %f\n", memalign_fraction_); |
| } |
| } |
| virtual ~AllocatorState() {} |
| |
| // Allocate memory. Randomly choose between malloc() or posix_memalign(). |
| void* alloc(size_t size) { |
| if (Uniform(100) < memalign_fraction_ * 100) { |
| // Try a few times to find a reasonable alignment, or fall back on malloc. |
| for (int i = 0; i < 5; i++) { |
| size_t alignment = 1 << Uniform(FLAGS_lg_max_memalign); |
| if (alignment >= sizeof(intptr_t) && |
| (size < sizeof(intptr_t) || |
| alignment < FLAGS_memalign_max_alignment_ratio * size)) { |
| void *result = reinterpret_cast<void*>(static_cast<intptr_t>(0x1234)); |
| int err = PosixMemalign(&result, alignment, size); |
| if (err != 0) { |
| CHECK_EQ(err, ENOMEM); |
| } |
| return err == 0 ? result : NULL; |
| } |
| } |
| } |
| return noopt(malloc(size)); |
| } |
| |
| private: |
| double memalign_fraction_; |
| }; |
| |
| |
| // Info kept per thread |
| class TesterThread { |
| private: |
| // Info kept per allocated object |
| struct Object { |
| char* ptr; // Allocated pointer |
| int size; // Allocated size |
| int generation; // Generation counter of object contents |
| }; |
| |
| Mutex lock_; // For passing in another thread's obj |
| int id_; // My thread id |
| AllocatorState rnd_; // For generating random numbers |
| vector<Object> heap_; // This thread's heap |
| vector<Object> passed_; // Pending objects passed from others |
| size_t heap_size_; // Current heap size |
| |
| // Type of operations |
| enum Type { ALLOC, FREE, UPDATE, PASS }; |
| |
| // ACM minimal standard random number generator. (re-entrant.) |
| class ACMRandom { |
| int32 seed_; |
| public: |
| explicit ACMRandom(int32 seed) { seed_ = seed; } |
| int32 Next() { |
| const int32 M = 2147483647L; // 2^31-1 |
| const int32 A = 16807; |
| // In effect, we are computing seed_ = (seed_ * A) % M, where M = 2^31-1 |
| uint32 lo = A * (int32)(seed_ & 0xFFFF); |
| uint32 hi = A * (int32)((uint32)seed_ >> 16); |
| lo += (hi & 0x7FFF) << 16; |
| if (lo > M) { |
| lo &= M; |
| ++lo; |
| } |
| lo += hi >> 15; |
| if (lo > M) { |
| lo &= M; |
| ++lo; |
| } |
| return (seed_ = (int32) lo); |
| } |
| }; |
| |
| public: |
| TesterThread(int id) |
| : id_(id), |
| rnd_(id+1), |
| heap_size_(0) { |
| } |
| |
| virtual ~TesterThread() { |
| } |
| |
| virtual void Run() { |
| rnd_.AddType(ALLOC, FLAGS_allocweight, "allocate"); |
| rnd_.AddType(FREE, FLAGS_freeweight, "free"); |
| rnd_.AddType(UPDATE, FLAGS_updateweight, "update"); |
| rnd_.AddType(PASS, FLAGS_passweight, "pass"); |
| |
| while (true) { |
| AcquirePassedObjects(); |
| |
| switch (rnd_.PickType()) { |
| case ALLOC: AllocateObject(); break; |
| case FREE: FreeObject(); break; |
| case UPDATE: UpdateObject(); break; |
| case PASS: PassObject(); break; |
| case -1: goto done; |
| default: assert(NULL == "Unknown type"); |
| } |
| |
| ShrinkHeap(); |
| } |
| |
| done: |
| DeleteHeap(); |
| } |
| |
| // Allocate a new object |
| void AllocateObject() { |
| Object object; |
| object.size = rnd_.Skewed(FLAGS_lgmaxsize); |
| object.ptr = static_cast<char*>(rnd_.alloc(object.size)); |
| CHECK(object.ptr); |
| object.generation = 0; |
| FillContents(&object); |
| heap_.push_back(object); |
| heap_size_ += object.size; |
| } |
| |
| // Mutate a random object |
| void UpdateObject() { |
| if (heap_.empty()) return; |
| const int index = rnd_.Uniform(heap_.size()); |
| CheckContents(heap_[index]); |
| heap_[index].generation++; |
| FillContents(&heap_[index]); |
| } |
| |
| // Free a random object |
| void FreeObject() { |
| if (heap_.empty()) return; |
| const int index = rnd_.Uniform(heap_.size()); |
| Object object = heap_[index]; |
| CheckContents(object); |
| free(object.ptr); |
| heap_size_ -= object.size; |
| heap_[index] = heap_[heap_.size()-1]; |
| heap_.pop_back(); |
| } |
| |
| // Delete all objects in the heap |
| void DeleteHeap() { |
| while (!heap_.empty()) { |
| FreeObject(); |
| } |
| } |
| |
| // Free objects until our heap is small enough |
| void ShrinkHeap() { |
| while (heap_size_ > FLAGS_threadmb << 20) { |
| assert(!heap_.empty()); |
| FreeObject(); |
| } |
| } |
| |
| // Pass a random object to another thread |
| void PassObject() { |
| // Pick object to pass |
| if (heap_.empty()) return; |
| const int index = rnd_.Uniform(heap_.size()); |
| Object object = heap_[index]; |
| CheckContents(object); |
| |
| // Pick thread to pass |
| const int tid = rnd_.Uniform(FLAGS_numthreads); |
| TesterThread* thread = threads[tid]; |
| |
| if (thread->lock_.TryLock()) { |
| // Pass the object |
| thread->passed_.push_back(object); |
| thread->lock_.Unlock(); |
| heap_size_ -= object.size; |
| heap_[index] = heap_[heap_.size()-1]; |
| heap_.pop_back(); |
| } |
| } |
| |
| // Grab any objects passed to this thread by another thread |
| void AcquirePassedObjects() { |
| // We do not create unnecessary contention by always using |
| // TryLock(). Plus we unlock immediately after swapping passed |
| // objects into a local vector. |
| vector<Object> copy; |
| { // Locking scope |
| if (!lock_.TryLock()) { |
| return; |
| } |
| swap(copy, passed_); |
| lock_.Unlock(); |
| } |
| |
| for (int i = 0; i < copy.size(); ++i) { |
| const Object& object = copy[i]; |
| CheckContents(object); |
| heap_.push_back(object); |
| heap_size_ += object.size; |
| } |
| } |
| |
| // Fill object contents according to ptr/generation |
| void FillContents(Object* object) { |
| ACMRandom r(reinterpret_cast<intptr_t>(object->ptr) & 0x7fffffff); |
| for (int i = 0; i < object->generation; ++i) { |
| r.Next(); |
| } |
| const char c = static_cast<char>(r.Next()); |
| memset(object->ptr, c, object->size); |
| } |
| |
| // Check object contents |
| void CheckContents(const Object& object) { |
| ACMRandom r(reinterpret_cast<intptr_t>(object.ptr) & 0x7fffffff); |
| for (int i = 0; i < object.generation; ++i) { |
| r.Next(); |
| } |
| |
| // For large objects, we just check a prefix/suffix |
| const char expected = static_cast<char>(r.Next()); |
| const int limit1 = object.size < 32 ? object.size : 32; |
| const int start2 = limit1 > object.size - 32 ? limit1 : object.size - 32; |
| for (int i = 0; i < limit1; ++i) { |
| CHECK_EQ(object.ptr[i], expected); |
| } |
| for (int i = start2; i < object.size; ++i) { |
| CHECK_EQ(object.ptr[i], expected); |
| } |
| } |
| }; |
| |
| static void RunThread(int thread_id) { |
| threads[thread_id]->Run(); |
| } |
| |
| static void TryHugeAllocation(size_t s, AllocatorState* rnd) { |
| void* p = rnd->alloc(noopt(s)); |
| CHECK(p == NULL); // huge allocation s should fail! |
| } |
| |
| static void TestHugeAllocations(AllocatorState* rnd) { |
| // Check that asking for stuff tiny bit smaller than largest possible |
| // size returns NULL. |
| for (size_t i = 0; i < 70000; i += rnd->Uniform(20)) { |
| TryHugeAllocation(kMaxSize - i, rnd); |
| } |
| // Asking for memory sizes near signed/unsigned boundary (kMaxSignedSize) |
| // might work or not, depending on the amount of virtual memory. |
| #ifndef DEBUGALLOCATION // debug allocation takes forever for huge allocs |
| for (size_t i = 0; i < 100; i++) { |
| void* p = NULL; |
| p = rnd->alloc(kMaxSignedSize + i); |
| if (p) free(p); // if: free(NULL) is not necessarily defined |
| p = rnd->alloc(kMaxSignedSize - i); |
| if (p) free(p); |
| } |
| #endif |
| |
| // Check that ReleaseFreeMemory has no visible effect (aka, does not |
| // crash the test): |
| MallocExtension* inst = MallocExtension::instance(); |
| CHECK(inst); |
| inst->ReleaseFreeMemory(); |
| } |
| |
| static void TestCalloc(size_t n, size_t s, bool ok) { |
| char* p = reinterpret_cast<char*>(calloc(n, s)); |
| if (FLAGS_verbose) |
| fprintf(LOGSTREAM, "calloc(%zx, %zx): %p\n", n, s, p); |
| if (!ok) { |
| CHECK(p == NULL); // calloc(n, s) should not succeed |
| } else { |
| CHECK(p != NULL); // calloc(n, s) should succeed |
| for (int i = 0; i < n*s; i++) { |
| CHECK(p[i] == '\0'); |
| } |
| free(p); |
| } |
| } |
| |
| // This makes sure that reallocing a small number of bytes in either |
| // direction doesn't cause us to allocate new memory. |
| static void TestRealloc() { |
| #ifndef DEBUGALLOCATION // debug alloc doesn't try to minimize reallocs |
| // When sampling, we always allocate in units of page-size, which |
| // makes reallocs of small sizes do extra work (thus, failing these |
| // checks). Since sampling is random, we turn off sampling to make |
| // sure that doesn't happen to us here. |
| const int64 old_sample_parameter = FLAGS_tcmalloc_sample_parameter; |
| FLAGS_tcmalloc_sample_parameter = 0; // turn off sampling |
| |
| int start_sizes[] = { 100, 1000, 10000, 100000 }; |
| int deltas[] = { 1, -2, 4, -8, 16, -32, 64, -128 }; |
| |
| for (int s = 0; s < sizeof(start_sizes)/sizeof(*start_sizes); ++s) { |
| void* p = noopt(malloc(start_sizes[s])); |
| CHECK(p); |
| // The larger the start-size, the larger the non-reallocing delta. |
| for (int d = 0; d < (s+1) * 2; ++d) { |
| void* new_p = noopt(realloc)(p, start_sizes[s] + deltas[d]); |
| CHECK(p == new_p); // realloc should not allocate new memory |
| } |
| // Test again, but this time reallocing smaller first. |
| for (int d = 0; d < s*2; ++d) { |
| void* new_p = noopt(realloc)(p, start_sizes[s] - deltas[d]); |
| CHECK(p == new_p); // realloc should not allocate new memory |
| } |
| free(p); |
| } |
| FLAGS_tcmalloc_sample_parameter = old_sample_parameter; |
| #endif |
| } |
| |
| static void TestNewHandler() { |
| ++news_handled; |
| throw std::bad_alloc(); |
| } |
| |
| static void TestOneNew(void* (*func)(size_t)) { |
| func = noopt(func); |
| // success test |
| try { |
| void* ptr = (*func)(kNotTooBig); |
| if (0 == ptr) { |
| fprintf(LOGSTREAM, "allocation should not have failed.\n"); |
| abort(); |
| } |
| } catch (...) { |
| fprintf(LOGSTREAM, "allocation threw unexpected exception.\n"); |
| abort(); |
| } |
| |
| // failure test |
| // we should always receive a bad_alloc exception |
| try { |
| (*func)(kTooBig); |
| fprintf(LOGSTREAM, "allocation should have failed.\n"); |
| abort(); |
| } catch (const std::bad_alloc&) { |
| // correct |
| } catch (...) { |
| fprintf(LOGSTREAM, "allocation threw unexpected exception.\n"); |
| abort(); |
| } |
| } |
| |
| static void TestNew(void* (*func)(size_t)) { |
| news_handled = 0; |
| |
| // test without new_handler: |
| std::new_handler saved_handler = std::set_new_handler(0); |
| TestOneNew(func); |
| |
| // test with new_handler: |
| std::set_new_handler(TestNewHandler); |
| TestOneNew(func); |
| if (news_handled != 1) { |
| fprintf(LOGSTREAM, "new_handler was not called.\n"); |
| abort(); |
| } |
| std::set_new_handler(saved_handler); |
| } |
| |
| static void TestOneNothrowNew(void* (*func)(size_t, const std::nothrow_t&)) { |
| func = noopt(func); |
| // success test |
| try { |
| void* ptr = (*func)(kNotTooBig, std::nothrow); |
| if (0 == ptr) { |
| fprintf(LOGSTREAM, "allocation should not have failed.\n"); |
| abort(); |
| } |
| } catch (...) { |
| fprintf(LOGSTREAM, "allocation threw unexpected exception.\n"); |
| abort(); |
| } |
| |
| // failure test |
| // we should always receive a bad_alloc exception |
| try { |
| if ((*func)(kTooBig, std::nothrow) != 0) { |
| fprintf(LOGSTREAM, "allocation should have failed.\n"); |
| abort(); |
| } |
| } catch (...) { |
| fprintf(LOGSTREAM, "nothrow allocation threw unexpected exception.\n"); |
| abort(); |
| } |
| } |
| |
| static void TestNothrowNew(void* (*func)(size_t, const std::nothrow_t&)) { |
| news_handled = 0; |
| |
| // test without new_handler: |
| std::new_handler saved_handler = std::set_new_handler(0); |
| TestOneNothrowNew(func); |
| |
| // test with new_handler: |
| std::set_new_handler(TestNewHandler); |
| TestOneNothrowNew(func); |
| if (news_handled != 1) { |
| fprintf(LOGSTREAM, "nothrow new_handler was not called.\n"); |
| abort(); |
| } |
| std::set_new_handler(saved_handler); |
| } |
| |
| |
| // These are used as callbacks by the sanity-check. Set* and Reset* |
| // register the hook that counts how many times the associated memory |
| // function is called. After each such call, call Verify* to verify |
| // that we used the tcmalloc version of the call, and not the libc. |
| // Note the ... in the hook signature: we don't care what arguments |
| // the hook takes. |
| #define MAKE_HOOK_CALLBACK(hook_type, ...) \ |
| static volatile int g_##hook_type##_calls = 0; \ |
| static void IncrementCallsTo##hook_type(__VA_ARGS__) { \ |
| g_##hook_type##_calls++; \ |
| } \ |
| static void Verify##hook_type##WasCalled() { \ |
| CHECK_GT(g_##hook_type##_calls, 0); \ |
| g_##hook_type##_calls = 0; /* reset for next call */ \ |
| } \ |
| static void Set##hook_type() { \ |
| CHECK(MallocHook::Add##hook_type( \ |
| (MallocHook::hook_type)&IncrementCallsTo##hook_type)); \ |
| } \ |
| static void Reset##hook_type() { \ |
| CHECK(MallocHook::Remove##hook_type( \ |
| (MallocHook::hook_type)&IncrementCallsTo##hook_type)); \ |
| } |
| |
| // We do one for each hook typedef in malloc_hook.h |
| MAKE_HOOK_CALLBACK(NewHook, const void*, size_t); |
| MAKE_HOOK_CALLBACK(DeleteHook, const void*); |
| |
| static void TestAlignmentForSize(int size) { |
| fprintf(LOGSTREAM, "Testing alignment of malloc(%d)\n", size); |
| static const int kNum = 100; |
| void* ptrs[kNum]; |
| for (int i = 0; i < kNum; i++) { |
| ptrs[i] = malloc(size); |
| uintptr_t p = reinterpret_cast<uintptr_t>(ptrs[i]); |
| CHECK((p % sizeof(void*)) == 0); |
| CHECK((p % sizeof(double)) == 0); |
| |
| // Must have 16-byte (or 8-byte in case of -DTCMALLOC_ALIGN_8BYTES) |
| // alignment for large enough objects |
| if (size >= kMinAlign) { |
| CHECK((p % kMinAlign) == 0); |
| } |
| } |
| for (int i = 0; i < kNum; i++) { |
| free(ptrs[i]); |
| } |
| } |
| |
| static void TestMallocAlignment() { |
| for (int lg = 0; lg < 16; lg++) { |
| TestAlignmentForSize((1<<lg) - 1); |
| TestAlignmentForSize((1<<lg) + 0); |
| TestAlignmentForSize((1<<lg) + 1); |
| } |
| } |
| |
| static void TestHugeThreadCache() { |
| fprintf(LOGSTREAM, "==== Testing huge thread cache\n"); |
| // More than 2^16 to cause integer overflow of 16 bit counters. |
| static const int kNum = 70000; |
| char** array = new char*[kNum]; |
| for (int i = 0; i < kNum; ++i) { |
| array[i] = new char[10]; |
| } |
| for (int i = 0; i < kNum; ++i) { |
| delete[] array[i]; |
| } |
| delete[] array; |
| } |
| |
| namespace { |
| |
| struct RangeCallbackState { |
| uintptr_t ptr; |
| base::MallocRange::Type expected_type; |
| size_t min_size; |
| bool matched; |
| }; |
| |
| static void RangeCallback(void* arg, const base::MallocRange* r) { |
| RangeCallbackState* state = reinterpret_cast<RangeCallbackState*>(arg); |
| if (state->ptr >= r->address && |
| state->ptr < r->address + r->length) { |
| if (state->expected_type == base::MallocRange::FREE) { |
| // We are expecting r->type == FREE, but ReleaseMemory |
| // may have already moved us to UNMAPPED state instead (this happens in |
| // approximately 0.1% of executions). Accept either state. |
| CHECK(r->type == base::MallocRange::FREE || |
| r->type == base::MallocRange::UNMAPPED); |
| } else { |
| CHECK_EQ(r->type, state->expected_type); |
| } |
| CHECK_GE(r->length, state->min_size); |
| state->matched = true; |
| } |
| } |
| |
| // Check that at least one of the callbacks from Ranges() contains |
| // the specified address with the specified type, and has size |
| // >= min_size. |
| static void CheckRangeCallback(void* ptr, base::MallocRange::Type type, |
| size_t min_size) { |
| RangeCallbackState state; |
| state.ptr = reinterpret_cast<uintptr_t>(ptr); |
| state.expected_type = type; |
| state.min_size = min_size; |
| state.matched = false; |
| MallocExtension::instance()->Ranges(&state, RangeCallback); |
| CHECK(state.matched); |
| } |
| |
| } |
| |
| static bool HaveSystemRelease() { |
| static bool retval = ([] () { |
| size_t actual; |
| auto ptr = TCMalloc_SystemAlloc(kPageSize, &actual, 0); |
| return TCMalloc_SystemRelease(ptr, actual); |
| }()); |
| return retval; |
| } |
| |
| static void TestRanges() { |
| static const int MB = 1048576; |
| void* a = malloc(MB); |
| void* b = malloc(MB); |
| base::MallocRange::Type releasedType = |
| HaveSystemRelease() ? base::MallocRange::UNMAPPED : base::MallocRange::FREE; |
| |
| CheckRangeCallback(a, base::MallocRange::INUSE, MB); |
| CheckRangeCallback(b, base::MallocRange::INUSE, MB); |
| (noopt(free))(a); |
| CheckRangeCallback(a, base::MallocRange::FREE, MB); |
| CheckRangeCallback(b, base::MallocRange::INUSE, MB); |
| MallocExtension::instance()->ReleaseFreeMemory(); |
| CheckRangeCallback(a, releasedType, MB); |
| CheckRangeCallback(b, base::MallocRange::INUSE, MB); |
| (noopt(free))(b); |
| CheckRangeCallback(a, releasedType, MB); |
| CheckRangeCallback(b, base::MallocRange::FREE, MB); |
| } |
| |
| #ifndef DEBUGALLOCATION |
| static size_t GetUnmappedBytes() { |
| size_t bytes; |
| CHECK(MallocExtension::instance()->GetNumericProperty( |
| "tcmalloc.pageheap_unmapped_bytes", &bytes)); |
| return bytes; |
| } |
| #endif |
| |
| class AggressiveDecommitChanger { |
| size_t old_value_; |
| public: |
| AggressiveDecommitChanger(size_t new_value) { |
| MallocExtension *inst = MallocExtension::instance(); |
| bool rv = inst->GetNumericProperty("tcmalloc.aggressive_memory_decommit", &old_value_); |
| CHECK_CONDITION(rv); |
| rv = inst->SetNumericProperty("tcmalloc.aggressive_memory_decommit", new_value); |
| CHECK_CONDITION(rv); |
| } |
| ~AggressiveDecommitChanger() { |
| MallocExtension *inst = MallocExtension::instance(); |
| bool rv = inst->SetNumericProperty("tcmalloc.aggressive_memory_decommit", old_value_); |
| CHECK_CONDITION(rv); |
| } |
| }; |
| |
| static void TestReleaseToSystem() { |
| // Debug allocation mode adds overhead to each allocation which |
| // messes up all the equality tests here. I just disable the |
| // teset in this mode. TODO(csilvers): get it to work for debugalloc? |
| #ifndef DEBUGALLOCATION |
| |
| if(!HaveSystemRelease()) return; |
| |
| const double old_tcmalloc_release_rate = FLAGS_tcmalloc_release_rate; |
| FLAGS_tcmalloc_release_rate = 0; |
| |
| AggressiveDecommitChanger disabler(0); |
| |
| static const int MB = 1048576; |
| void* a = noopt(malloc(MB)); |
| void* b = noopt(malloc(MB)); |
| MallocExtension::instance()->ReleaseFreeMemory(); |
| size_t starting_bytes = GetUnmappedBytes(); |
| |
| // Calling ReleaseFreeMemory() a second time shouldn't do anything. |
| MallocExtension::instance()->ReleaseFreeMemory(); |
| EXPECT_EQ(starting_bytes, GetUnmappedBytes()); |
| |
| // ReleaseToSystem shouldn't do anything either. |
| MallocExtension::instance()->ReleaseToSystem(MB); |
| EXPECT_EQ(starting_bytes, GetUnmappedBytes()); |
| |
| free(a); |
| |
| // The span to release should be 1MB. |
| MallocExtension::instance()->ReleaseToSystem(MB/2); |
| EXPECT_EQ(starting_bytes + MB, GetUnmappedBytes()); |
| |
| // Should do nothing since the previous call released too much. |
| MallocExtension::instance()->ReleaseToSystem(MB/4); |
| EXPECT_EQ(starting_bytes + MB, GetUnmappedBytes()); |
| |
| free(b); |
| |
| // Use up the extra MB/4 bytes from 'a' and also release 'b'. |
| MallocExtension::instance()->ReleaseToSystem(MB/2); |
| EXPECT_EQ(starting_bytes + 2*MB, GetUnmappedBytes()); |
| |
| // Should do nothing since the previous call released too much. |
| MallocExtension::instance()->ReleaseToSystem(MB/2); |
| EXPECT_EQ(starting_bytes + 2*MB, GetUnmappedBytes()); |
| |
| // Nothing else to release. |
| MallocExtension::instance()->ReleaseFreeMemory(); |
| EXPECT_EQ(starting_bytes + 2*MB, GetUnmappedBytes()); |
| |
| a = noopt(malloc(MB)); |
| free(a); |
| EXPECT_EQ(starting_bytes + MB, GetUnmappedBytes()); |
| |
| // Releasing less than a page should still trigger a release. |
| MallocExtension::instance()->ReleaseToSystem(1); |
| EXPECT_EQ(starting_bytes + 2*MB, GetUnmappedBytes()); |
| |
| FLAGS_tcmalloc_release_rate = old_tcmalloc_release_rate; |
| #endif // #ifndef DEBUGALLOCATION |
| } |
| |
| static void TestAggressiveDecommit() { |
| // Debug allocation mode adds overhead to each allocation which |
| // messes up all the equality tests here. I just disable the |
| // teset in this mode. |
| #ifndef DEBUGALLOCATION |
| |
| if(!HaveSystemRelease()) return; |
| |
| fprintf(LOGSTREAM, "Testing aggressive de-commit\n"); |
| |
| AggressiveDecommitChanger enabler(1); |
| |
| static const int MB = 1048576; |
| void* a = noopt(malloc(MB)); |
| void* b = noopt(malloc(MB)); |
| |
| size_t starting_bytes = GetUnmappedBytes(); |
| |
| // ReleaseToSystem shouldn't do anything either. |
| MallocExtension::instance()->ReleaseToSystem(MB); |
| EXPECT_EQ(starting_bytes, GetUnmappedBytes()); |
| |
| free(a); |
| |
| // The span to release should be 1MB. |
| EXPECT_EQ(starting_bytes + MB, GetUnmappedBytes()); |
| |
| free(b); |
| |
| EXPECT_EQ(starting_bytes + 2*MB, GetUnmappedBytes()); |
| |
| // Nothing else to release. |
| MallocExtension::instance()->ReleaseFreeMemory(); |
| EXPECT_EQ(starting_bytes + 2*MB, GetUnmappedBytes()); |
| |
| a = noopt(malloc(MB)); |
| free(a); |
| |
| EXPECT_EQ(starting_bytes + 2*MB, GetUnmappedBytes()); |
| |
| fprintf(LOGSTREAM, "Done testing aggressive de-commit\n"); |
| |
| #endif // #ifndef DEBUGALLOCATION |
| } |
| |
| // On MSVC10, in release mode, the optimizer convinces itself |
| // g_no_memory is never changed (I guess it doesn't realize OnNoMemory |
| // might be called). Work around this by setting the var volatile. |
| volatile bool g_no_memory = false; |
| std::new_handler g_old_handler = NULL; |
| static void OnNoMemory() { |
| g_no_memory = true; |
| std::set_new_handler(g_old_handler); |
| } |
| |
| static void TestSetNewMode() { |
| int old_mode = tc_set_new_mode(1); |
| |
| g_old_handler = std::set_new_handler(&OnNoMemory); |
| g_no_memory = false; |
| void* ret = noopt(malloc(noopt(kTooBig))); |
| EXPECT_EQ(NULL, ret); |
| EXPECT_TRUE(g_no_memory); |
| |
| g_old_handler = std::set_new_handler(&OnNoMemory); |
| g_no_memory = false; |
| ret = noopt(calloc(1, noopt(kTooBig))); |
| EXPECT_EQ(NULL, ret); |
| EXPECT_TRUE(g_no_memory); |
| |
| g_old_handler = std::set_new_handler(&OnNoMemory); |
| g_no_memory = false; |
| ret = noopt(realloc(nullptr, noopt(kTooBig))); |
| EXPECT_EQ(NULL, ret); |
| EXPECT_TRUE(g_no_memory); |
| |
| if (kOSSupportsMemalign) { |
| // Not really important, but must be small enough such that |
| // kAlignment + kTooBig does not overflow. |
| const int kAlignment = 1 << 5; |
| |
| g_old_handler = std::set_new_handler(&OnNoMemory); |
| g_no_memory = false; |
| ret = Memalign(kAlignment, kTooBig); |
| EXPECT_EQ(NULL, ret); |
| EXPECT_TRUE(g_no_memory); |
| |
| g_old_handler = std::set_new_handler(&OnNoMemory); |
| g_no_memory = false; |
| EXPECT_EQ(ENOMEM, |
| PosixMemalign(&ret, kAlignment, kTooBig)); |
| EXPECT_EQ(NULL, ret); |
| EXPECT_TRUE(g_no_memory); |
| } |
| |
| tc_set_new_mode(old_mode); |
| } |
| |
| static void TestErrno(void) { |
| void* ret; |
| if (kOSSupportsMemalign) { |
| errno = 0; |
| ret = Memalign(128, kTooBig); |
| EXPECT_EQ(NULL, ret); |
| EXPECT_EQ(ENOMEM, errno); |
| } |
| |
| errno = 0; |
| ret = noopt(malloc(noopt(kTooBig))); |
| EXPECT_EQ(NULL, ret); |
| EXPECT_EQ(ENOMEM, errno); |
| |
| errno = 0; |
| ret = tc_malloc_skip_new_handler(kTooBig); |
| EXPECT_EQ(NULL, ret); |
| EXPECT_EQ(ENOMEM, errno); |
| } |
| |
| |
| #ifndef DEBUGALLOCATION |
| // Ensure that nallocx works before main. |
| struct GlobalNallocx { |
| GlobalNallocx() { CHECK_GT(nallocx(99, 0), 99); } |
| } global_nallocx; |
| |
| #if defined(__GNUC__) |
| |
| static void check_global_nallocx() __attribute__((constructor)); |
| static void check_global_nallocx() { CHECK_GT(nallocx(99, 0), 99); } |
| |
| #endif // __GNUC__ |
| |
| static size_t GrowNallocxTestSize(size_t sz) { |
| if (sz < 1024) { |
| return sz + 7; |
| } |
| |
| size_t divided = sz >> 7; |
| divided |= (divided >> 1); |
| divided |= (divided >> 2); |
| divided |= (divided >> 4); |
| divided |= (divided >> 8); |
| divided |= (divided >> 16); |
| divided += 1; |
| return sz + divided; |
| } |
| |
| static void TestNAllocX() { |
| for (size_t size = 0; size <= (1 << 20); size = GrowNallocxTestSize(size)) { |
| size_t rounded = nallocx(size, 0); |
| ASSERT_GE(rounded, size); |
| void* ptr = malloc(size); |
| ASSERT_EQ(rounded, MallocExtension::instance()->GetAllocatedSize(ptr)); |
| free(ptr); |
| } |
| } |
| |
| static void TestNAllocXAlignment() { |
| for (size_t size = 0; size <= (1 << 20); size = GrowNallocxTestSize(size)) { |
| for (size_t align = 0; align < 10; align++) { |
| size_t rounded = nallocx(size, MALLOCX_LG_ALIGN(align)); |
| ASSERT_GE(rounded, size); |
| ASSERT_EQ(rounded % (1 << align), 0); |
| void* ptr = tc_memalign(1 << align, size); |
| ASSERT_EQ(rounded, MallocExtension::instance()->GetAllocatedSize(ptr)); |
| free(ptr); |
| } |
| } |
| } |
| |
| static int saw_new_handler_runs; |
| static void* volatile oom_test_last_ptr; |
| |
| static void test_new_handler() { |
| get_test_sys_alloc()->simulate_oom = false; |
| void *ptr = oom_test_last_ptr; |
| oom_test_last_ptr = NULL; |
| ::operator delete[](ptr); |
| saw_new_handler_runs++; |
| } |
| |
| static ATTRIBUTE_NOINLINE void TestNewOOMHandling() { |
| // debug allocator does internal allocations and crashes when such |
| // internal allocation fails. So don't test it. |
| setup_oomable_sys_alloc(); |
| |
| std::new_handler old = std::set_new_handler(test_new_handler); |
| get_test_sys_alloc()->simulate_oom = true; |
| |
| ASSERT_EQ(saw_new_handler_runs, 0); |
| |
| for (int i = 0; i < 10240; i++) { |
| oom_test_last_ptr = noopt(new char [512]); |
| ASSERT_NE(oom_test_last_ptr, NULL); |
| if (saw_new_handler_runs) { |
| break; |
| } |
| } |
| |
| ASSERT_GE(saw_new_handler_runs, 1); |
| |
| get_test_sys_alloc()->simulate_oom = false; |
| std::set_new_handler(old); |
| } |
| #endif // !DEBUGALLOCATION |
| |
| static int RunAllTests(int argc, char** argv) { |
| // Optional argv[1] is the seed |
| AllocatorState rnd(argc > 1 ? atoi(argv[1]) : 100); |
| |
| SetTestResourceLimit(); |
| |
| #ifndef DEBUGALLOCATION |
| TestNewOOMHandling(); |
| #endif |
| |
| // TODO(odo): This test has been disabled because it is only by luck that it |
| // does not result in fragmentation. When tcmalloc makes an allocation which |
| // spans previously unused leaves of the pagemap it will allocate and fill in |
| // the leaves to cover the new allocation. The leaves happen to be 256MiB in |
| // the 64-bit build, and with the sbrk allocator these allocations just |
| // happen to fit in one leaf by luck. With other allocators (mmap, |
| // memfs_malloc when used with small pages) the allocations generally span |
| // two leaves and this results in a very bad fragmentation pattern with this |
| // code. The same failure can be forced with the sbrk allocator just by |
| // allocating something on the order of 128MiB prior to starting this test so |
| // that the test allocations straddle a 256MiB boundary. |
| |
| // TODO(csilvers): port MemoryUsage() over so the test can use that |
| #if 0 |
| # include <unistd.h> // for getpid() |
| // Allocate and deallocate blocks of increasing sizes to check if the alloc |
| // metadata fragments the memory. (Do not put other allocations/deallocations |
| // before this test, it may break). |
| { |
| size_t memory_usage = MemoryUsage(getpid()); |
| fprintf(LOGSTREAM, "Testing fragmentation\n"); |
| for ( int i = 200; i < 240; ++i ) { |
| int size = i << 20; |
| void *test1 = rnd.alloc(size); |
| CHECK(test1); |
| for ( int j = 0; j < size; j += (1 << 12) ) { |
| static_cast<char*>(test1)[j] = 1; |
| } |
| free(test1); |
| } |
| // There may still be a bit of fragmentation at the beginning, until we |
| // reach kPageMapBigAllocationThreshold bytes so we check for |
| // 200 + 240 + margin. |
| CHECK_LT(MemoryUsage(getpid()), memory_usage + (450 << 20) ); |
| } |
| #endif |
| |
| // Check that empty allocation works |
| fprintf(LOGSTREAM, "Testing empty allocation\n"); |
| { |
| void* p1 = rnd.alloc(0); |
| CHECK(p1 != NULL); |
| void* p2 = rnd.alloc(0); |
| CHECK(p2 != NULL); |
| CHECK(p1 != p2); |
| free(p1); |
| free(p2); |
| } |
| |
| // This code stresses some of the memory allocation via STL. |
| // It may call operator delete(void*, nothrow_t). |
| fprintf(LOGSTREAM, "Testing STL use\n"); |
| { |
| std::vector<int> v; |
| v.push_back(1); |
| v.push_back(2); |
| v.push_back(3); |
| v.push_back(0); |
| std::stable_sort(v.begin(), v.end()); |
| } |
| |
| #ifdef ENABLE_SIZED_DELETE |
| { |
| fprintf(LOGSTREAM, "Testing large sized delete is not crashing\n"); |
| // Large sized delete |
| // case. https://github.com/gperftools/gperftools/issues/1254 |
| std::vector<char*> addresses; |
| constexpr int kSizedDepth = 1024; |
| addresses.reserve(kSizedDepth); |
| for (int i = 0; i < kSizedDepth; i++) { |
| addresses.push_back(noopt(new char[12686])); |
| } |
| for (int i = 0; i < kSizedDepth; i++) { |
| ::operator delete[](addresses[i], 12686); |
| } |
| } |
| #endif |
| |
| // Test each of the memory-allocation functions once, just as a sanity-check |
| fprintf(LOGSTREAM, "Sanity-testing all the memory allocation functions\n"); |
| { |
| // We use new-hook and delete-hook to verify we actually called the |
| // tcmalloc version of these routines, and not the libc version. |
| SetNewHook(); // defined as part of MAKE_HOOK_CALLBACK, above |
| SetDeleteHook(); // ditto |
| |
| void* p1 = noopt(malloc)(10); |
| CHECK(p1 != NULL); // force use of this variable |
| VerifyNewHookWasCalled(); |
| // Also test the non-standard tc_malloc_size |
| size_t actual_p1_size = tc_malloc_size(p1); |
| CHECK_GE(actual_p1_size, 10); |
| CHECK_LT(actual_p1_size, 100000); // a reasonable upper-bound, I think |
| free(p1); |
| VerifyDeleteHookWasCalled(); |
| |
| p1 = tc_malloc_skip_new_handler(10); |
| CHECK(p1 != NULL); |
| VerifyNewHookWasCalled(); |
| free(p1); |
| VerifyDeleteHookWasCalled(); |
| |
| p1 = noopt(calloc)(10, 2); |
| CHECK(p1 != NULL); |
| VerifyNewHookWasCalled(); |
| // We make sure we realloc to a big size, since some systems (OS |
| // X) will notice if the realloced size continues to fit into the |
| // malloc-block and make this a noop if so. |
| p1 = noopt(realloc)(p1, 30000); |
| CHECK(p1 != NULL); |
| VerifyNewHookWasCalled(); |
| VerifyDeleteHookWasCalled(); |
| cfree(p1); // synonym for free |
| VerifyDeleteHookWasCalled(); |
| |
| if (kOSSupportsMemalign) { |
| CHECK_EQ(noopt(PosixMemalign)(&p1, sizeof(p1), 40), 0); |
| CHECK(p1 != NULL); |
| VerifyNewHookWasCalled(); |
| free(p1); |
| VerifyDeleteHookWasCalled(); |
| |
| p1 = noopt(Memalign)(sizeof(p1) * 2, 50); |
| CHECK(p1 != NULL); |
| VerifyNewHookWasCalled(); |
| free(p1); |
| VerifyDeleteHookWasCalled(); |
| } |
| |
| // Windows has _aligned_malloc. Let's test that that's captured too. |
| #if (defined(_MSC_VER) || defined(__MINGW32__)) && !defined(PERFTOOLS_NO_ALIGNED_MALLOC) |
| p1 = noopt(_aligned_malloc)(sizeof(p1) * 2, 64); |
| CHECK(p1 != NULL); |
| VerifyNewHookWasCalled(); |
| _aligned_free(p1); |
| VerifyDeleteHookWasCalled(); |
| #endif |
| |
| p1 = noopt(valloc(60)); |
| CHECK(p1 != NULL); |
| VerifyNewHookWasCalled(); |
| free(p1); |
| VerifyDeleteHookWasCalled(); |
| |
| p1 = noopt(pvalloc(70)); |
| CHECK(p1 != NULL); |
| VerifyNewHookWasCalled(); |
| free(p1); |
| VerifyDeleteHookWasCalled(); |
| |
| char* p2 = noopt(new char); |
| CHECK(p2 != NULL); |
| VerifyNewHookWasCalled(); |
| delete p2; |
| VerifyDeleteHookWasCalled(); |
| |
| p2 = noopt(new char[100]); |
| CHECK(p2 != NULL); |
| VerifyNewHookWasCalled(); |
| delete[] p2; |
| VerifyDeleteHookWasCalled(); |
| |
| p2 = noopt(new (std::nothrow) char); |
| CHECK(p2 != NULL); |
| VerifyNewHookWasCalled(); |
| delete p2; |
| VerifyDeleteHookWasCalled(); |
| |
| p2 = noopt(new (std::nothrow) char[100]); |
| CHECK(p2 != NULL); |
| VerifyNewHookWasCalled(); |
| delete[] p2; |
| VerifyDeleteHookWasCalled(); |
| |
| // Another way of calling operator new |
| p2 = noopt(static_cast<char*>(::operator new(100))); |
| CHECK(p2 != NULL); |
| VerifyNewHookWasCalled(); |
| ::operator delete(p2); |
| VerifyDeleteHookWasCalled(); |
| |
| // Try to call nothrow's delete too. Compilers use this. |
| p2 = noopt(static_cast<char*>(::operator new(100, std::nothrow))); |
| CHECK(p2 != NULL); |
| VerifyNewHookWasCalled(); |
| ::operator delete(p2, std::nothrow); |
| VerifyDeleteHookWasCalled(); |
| |
| #ifdef ENABLE_SIZED_DELETE |
| p2 = noopt(new char); |
| CHECK(p2 != NULL); |
| VerifyNewHookWasCalled(); |
| ::operator delete(p2, sizeof(char)); |
| VerifyDeleteHookWasCalled(); |
| |
| p2 = noopt(new char[100]); |
| CHECK(p2 != NULL); |
| VerifyNewHookWasCalled(); |
| ::operator delete[](p2, sizeof(char) * 100); |
| VerifyDeleteHookWasCalled(); |
| #endif |
| |
| #if defined(ENABLE_ALIGNED_NEW_DELETE) |
| |
| overaligned_type* poveraligned = noopt(new overaligned_type); |
| CHECK(poveraligned != NULL); |
| CHECK((((size_t)poveraligned) % OVERALIGNMENT) == 0u); |
| VerifyNewHookWasCalled(); |
| delete poveraligned; |
| VerifyDeleteHookWasCalled(); |
| |
| poveraligned = noopt(new overaligned_type[10]); |
| CHECK(poveraligned != NULL); |
| CHECK((((size_t)poveraligned) % OVERALIGNMENT) == 0u); |
| VerifyNewHookWasCalled(); |
| delete[] poveraligned; |
| VerifyDeleteHookWasCalled(); |
| |
| poveraligned = noopt(new(std::nothrow) overaligned_type); |
| CHECK(poveraligned != NULL); |
| CHECK((((size_t)poveraligned) % OVERALIGNMENT) == 0u); |
| VerifyNewHookWasCalled(); |
| delete poveraligned; |
| VerifyDeleteHookWasCalled(); |
| |
| poveraligned = noopt(new(std::nothrow) overaligned_type[10]); |
| CHECK(poveraligned != NULL); |
| CHECK((((size_t)poveraligned) % OVERALIGNMENT) == 0u); |
| VerifyNewHookWasCalled(); |
| delete[] poveraligned; |
| VerifyDeleteHookWasCalled(); |
| |
| // Another way of calling operator new |
| p2 = noopt(static_cast<char*>(::operator new(100, std::align_val_t(OVERALIGNMENT)))); |
| CHECK(p2 != NULL); |
| CHECK((((size_t)p2) % OVERALIGNMENT) == 0u); |
| VerifyNewHookWasCalled(); |
| ::operator delete(p2, std::align_val_t(OVERALIGNMENT)); |
| VerifyDeleteHookWasCalled(); |
| |
| p2 = noopt(static_cast<char*>(::operator new(100, std::align_val_t(OVERALIGNMENT), std::nothrow))); |
| CHECK(p2 != NULL); |
| CHECK((((size_t)p2) % OVERALIGNMENT) == 0u); |
| VerifyNewHookWasCalled(); |
| ::operator delete(p2, std::align_val_t(OVERALIGNMENT), std::nothrow); |
| VerifyDeleteHookWasCalled(); |
| |
| #ifdef ENABLE_SIZED_DELETE |
| poveraligned = noopt(new overaligned_type); |
| CHECK(poveraligned != NULL); |
| CHECK((((size_t)poveraligned) % OVERALIGNMENT) == 0u); |
| VerifyNewHookWasCalled(); |
| ::operator delete(poveraligned, sizeof(overaligned_type), std::align_val_t(OVERALIGNMENT)); |
| VerifyDeleteHookWasCalled(); |
| |
| poveraligned = noopt(new overaligned_type[10]); |
| CHECK(poveraligned != NULL); |
| CHECK((((size_t)poveraligned) % OVERALIGNMENT) == 0u); |
| VerifyNewHookWasCalled(); |
| ::operator delete[](poveraligned, sizeof(overaligned_type) * 10, std::align_val_t(OVERALIGNMENT)); |
| VerifyDeleteHookWasCalled(); |
| #endif |
| |
| #endif // defined(ENABLE_ALIGNED_NEW_DELETE) |
| |
| // On AIX user defined malloc replacement of libc routines |
| // cannot be done at link time must be done a runtime via |
| // environment variable MALLOCTYPE |
| #if !defined(_AIX) |
| // Try strdup(), which the system allocates but we must free. If |
| // all goes well, libc will use our malloc! |
| p2 = noopt(strdup("in memory of James Golick")); |
| CHECK(p2 != NULL); |
| VerifyNewHookWasCalled(); |
| free(p2); |
| VerifyDeleteHookWasCalled(); |
| #endif |
| |
| // Reset the hooks to what they used to be. These are all |
| // defined as part of MAKE_HOOK_CALLBACK, above. |
| ResetNewHook(); |
| ResetDeleteHook(); |
| |
| } |
| |
| // Check that "lots" of memory can be allocated |
| fprintf(LOGSTREAM, "Testing large allocation\n"); |
| { |
| const int mb_to_allocate = 100; |
| void* p = rnd.alloc(mb_to_allocate << 20); |
| CHECK(p != NULL); // could not allocate |
| free(p); |
| } |
| |
| TestMallocAlignment(); |
| |
| // Check calloc() with various arguments |
| fprintf(LOGSTREAM, "Testing calloc\n"); |
| TestCalloc(0, 0, true); |
| TestCalloc(0, 1, true); |
| TestCalloc(1, 1, true); |
| TestCalloc(1<<10, 0, true); |
| TestCalloc(1<<20, 0, true); |
| TestCalloc(0, 1<<10, true); |
| TestCalloc(0, 1<<20, true); |
| TestCalloc(1<<20, 2, true); |
| TestCalloc(2, 1<<20, true); |
| TestCalloc(1000, 1000, true); |
| |
| TestCalloc(kMaxSize, 2, false); |
| TestCalloc(2, kMaxSize, false); |
| TestCalloc(kMaxSize, kMaxSize, false); |
| |
| TestCalloc(kMaxSignedSize, 3, false); |
| TestCalloc(3, kMaxSignedSize, false); |
| TestCalloc(kMaxSignedSize, kMaxSignedSize, false); |
| |
| // Test that realloc doesn't always reallocate and copy memory. |
| fprintf(LOGSTREAM, "Testing realloc\n"); |
| TestRealloc(); |
| |
| fprintf(LOGSTREAM, "Testing operator new(nothrow).\n"); |
| TestNothrowNew(&::operator new); |
| fprintf(LOGSTREAM, "Testing operator new[](nothrow).\n"); |
| TestNothrowNew(&::operator new[]); |
| fprintf(LOGSTREAM, "Testing operator new.\n"); |
| TestNew(&::operator new); |
| fprintf(LOGSTREAM, "Testing operator new[].\n"); |
| TestNew(&::operator new[]); |
| |
| // Create threads |
| fprintf(LOGSTREAM, "Testing threaded allocation/deallocation (%d threads)\n", |
| FLAGS_numthreads); |
| threads = new TesterThread*[FLAGS_numthreads]; |
| for (int i = 0; i < FLAGS_numthreads; ++i) { |
| threads[i] = new TesterThread(i); |
| } |
| |
| // This runs all the tests at the same time, with a 1M stack size each |
| RunManyThreadsWithId(RunThread, FLAGS_numthreads, 1<<20); |
| |
| for (int i = 0; i < FLAGS_numthreads; ++i) delete threads[i]; // Cleanup |
| |
| // Do the memory intensive tests after threads are done, since exhausting |
| // the available address space can make pthread_create to fail. |
| |
| // Check that huge allocations fail with NULL instead of crashing |
| fprintf(LOGSTREAM, "Testing huge allocations\n"); |
| TestHugeAllocations(&rnd); |
| |
| // Check that large allocations fail with NULL instead of crashing |
| #ifndef DEBUGALLOCATION // debug allocation takes forever for huge allocs |
| fprintf(LOGSTREAM, "Testing out of memory\n"); |
| size_t old_limit; |
| CHECK(MallocExtension::instance()->GetNumericProperty("tcmalloc.heap_limit_mb", &old_limit)); |
| // Don't exercise more than 1 gig, no need to. |
| CHECK(MallocExtension::instance()->SetNumericProperty("tcmalloc.heap_limit_mb", 1 << 10)); |
| for (int s = 0; ; s += (10<<20)) { |
| void* large_object = rnd.alloc(s); |
| if (large_object == NULL) break; |
| free(large_object); |
| } |
| CHECK(MallocExtension::instance()->SetNumericProperty("tcmalloc.heap_limit_mb", old_limit)); |
| #endif |
| |
| TestHugeThreadCache(); |
| TestRanges(); |
| TestReleaseToSystem(); |
| TestAggressiveDecommit(); |
| TestSetNewMode(); |
| TestErrno(); |
| |
| // GetAllocatedSize under DEBUGALLOCATION returns the size that we asked for. |
| #ifndef DEBUGALLOCATION |
| TestNAllocX(); |
| TestNAllocXAlignment(); |
| #endif |
| |
| return 0; |
| } |
| |
| } // namespace testing |
| |
| using testing::RunAllTests; |
| |
| int main(int argc, char** argv) { |
| #ifdef DEBUGALLOCATION // debug allocation takes forever for huge allocs |
| FLAGS_max_free_queue_size = 0; // return freed blocks to tcmalloc immediately |
| #endif |
| |
| #if defined(__linux) || defined(_WIN32) |
| // We know that Linux and Windows have functional memory releasing |
| // support. So don't let us degrade on that. |
| if (!getenv("DONT_TEST_SYSTEM_RELEASE")) { |
| CHECK_CONDITION(testing::HaveSystemRelease()); |
| } |
| #endif |
| |
| RunAllTests(argc, argv); |
| |
| // Test tc_version() |
| fprintf(LOGSTREAM, "Testing tc_version()\n"); |
| int major; |
| int minor; |
| const char* patch; |
| char mmp[64]; |
| const char* human_version = tc_version(&major, &minor, &patch); |
| snprintf(mmp, sizeof(mmp), "%d.%d%s", major, minor, patch); |
| CHECK(!strcmp(PACKAGE_STRING, human_version)); |
| CHECK(!strcmp(PACKAGE_VERSION, mmp)); |
| |
| fprintf(LOGSTREAM, "PASS\n"); |
| } |