| cmake_minimum_required(VERSION 3.12) |
| |
| # Please note that cmake support is very preliminary. Autotools-based |
| # build is the only fully supported build for now. |
| |
| # Based on configure.ac |
| |
| project(gperftools VERSION 2.14 LANGUAGES C CXX |
| DESCRIPTION "Performance tools for C++" |
| HOMEPAGE_URL https://github.com/gperftools/gperftools) |
| |
| # Update this value for every release! |
| set(TCMALLOC_SO_VERSION 9.15.5) |
| set(PROFILER_SO_VERSION 5.10.5) |
| set(TCMALLOC_AND_PROFILER_SO_VERSION 10.10.6) |
| |
| # The user can choose not to compile in the heap-profiler, the |
| # heap-checker, or the cpu-profiler. There's also the possibility |
| # for a 'fully minimal' compile, which leaves out the stacktrace |
| # code as well. By default, we include all of these that the |
| # target system supports. |
| set(DEFAULT_BUILD_CPU_PROFILER ON) |
| set(DEFAULT_BUILD_HEAP_PROFILER ON) |
| set(DEFAULT_BUILD_HEAP_CHECKER OFF) |
| set(DEFAULT_BUILD_DEBUGALLOC ON) |
| set(DEFAULT_BUILD_MINIMAL OFF) |
| |
| set(DEFAULT_TCMALLOC_ALIGNMENT 16) |
| set(NEED_NANOSLEEP ON) # Used later, to decide if to run ACX_NANOSLEEP |
| |
| set(HOST string(TOLOWER "${CMAKE_SYSTEM_NAME}")) |
| |
| if(MINGW OR MSVC) |
| set(DEFAULT_BUILD_MINIMAL ON) |
| set(DEFAULT_BUILD_DEBUGALLOC OFF) |
| set(NEED_NANOSLEEP OFF) |
| elseif(CYGWIN) |
| set(DEFAULT_BUILD_CPU_PROFILER OFF) |
| endif() |
| |
| # Heap checker is Linux-only (and deprecated). |
| if(CMAKE_SYSTEM MATCHES Linux) |
| set(DEFAULT_BUILD_HEAP_CHECKER ON) |
| endif() |
| |
| include(CheckCCompilerFlag) |
| include(CheckCXXCompilerFlag) |
| include(CheckCSourceCompiles) |
| include(CheckCXXSourceCompiles) |
| include(CheckFunctionExists) |
| include(CheckIncludeFile) |
| include(CheckLibraryExists) |
| include(CheckSymbolExists) |
| include(CheckTypeSize) |
| include(CheckVariableExists) |
| include(CMakeDependentOption) |
| include(CTest) |
| include(CPack) |
| include(GNUInstallDirs) |
| |
| list(APPEND CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/cmake) |
| include(DefineTargetVariables) |
| |
| define_target_variables() |
| |
| # Currently only backtrace works on s390. |
| if(s390 OR OSX) |
| set(default_enable_libunwind OFF) |
| set(default_enable_backtrace ON) |
| else() |
| set(default_enable_libunwind ON) |
| set(default_enable_backtrace OFF) |
| endif() |
| |
| # Disable libunwind linking on ppc64 by default. |
| if(PPC64) |
| set(default_enable_libunwind OFF) |
| set(default_tcmalloc_pagesize 64) |
| else() |
| if(PPC) |
| set(default_enable_libunwind OFF) |
| else() |
| set(default_enable_libunwind ON) |
| endif() |
| set(default_tcmalloc_pagesize 8) |
| endif() |
| |
| cmake_dependent_option( |
| GPERFTOOLS_BUILD_CPU_PROFILER "Build cpu-profiler" ${DEFAULT_BUILD_CPU_PROFILER} |
| "NOT gperftools_build_minimal" OFF) |
| cmake_dependent_option( |
| GPERFTOOLS_BUILD_HEAP_PROFILER "Build heap-profiler" ${DEFAULT_BUILD_HEAP_PROFILER} |
| "NOT gperftools_build_minimal" OFF) |
| cmake_dependent_option( |
| GPERFTOOLS_BUILD_HEAP_CHECKER "Build heap-checker" ${DEFAULT_BUILD_HEAP_CHECKER} |
| "NOT gperftools_build_minimal" OFF) |
| cmake_dependent_option( |
| GPERFTOOLS_BUILD_DEBUGALLOC "Build debugalloc" ${DEFAULT_BUILD_DEBUGALLOC} |
| "NOT gperftools_build_minimal" OFF) |
| option( |
| gperftools_build_minimal |
| "Build only tcmalloc-minimal (and maybe tcmalloc-minimal-debug)" |
| ${DEFAULT_BUILD_MINIMAL}) |
| if(gperftools_build_minimal) |
| set(GPERFTOOLS_BUILD_CPU_PROFILER OFF) |
| set(GPERFTOOLS_BUILD_HEAP_PROFILER OFF) |
| set(GPERFTOOLS_BUILD_HEAP_CHECKER OFF) |
| endif() |
| |
| cmake_dependent_option( |
| gperftools_build_benchmark "Build benchmark" ON "NOT MINGW AND NOT MSVC" OFF) |
| |
| option(gperftools_enable_stacktrace_via_backtrace |
| "Enable use of backtrace() for stacktrace capturing (may deadlock)" |
| ${default_enable_backtrace}) |
| option(gperftools_enable_libunwind |
| "Enable libunwind linking" |
| ${default_enable_libunwind}) |
| |
| set(enable_backtrace ${gperftools_enable_stacktrace_via_backtrace}) |
| set(enable_libunwind ${gperftools_enable_libunwind}) |
| |
| option(gperftools_enable_libgcc_unwinder_by_default |
| "Prefer libgcc's _Unwind_Backtrace as default stacktrace capturing method" |
| OFF) |
| set(PREFER_LIBGCC_UNWINDER ${gperftools_enable_libgcc_unwinder_by_default}) |
| |
| set(gperftools_tcmalloc_pagesize ${default_tcmalloc_pagesize} |
| CACHE STRING "Set the tcmalloc internal page size") |
| set(allowed_page_sizes LIST "4;8;16;32;64;128;256") |
| set_property(CACHE gperftools_tcmalloc_pagesize PROPERTY STRINGS ${allowed_page_sizes}) |
| if(NOT gperftools_tcmalloc_pagesize IN_LIST allowed_page_sizes) |
| message(WARNING |
| "Invalid gperftools_tcmalloc_pagesize (${gperftools_tcmalloc_pagesize}), " |
| "setting to default value (${default_tcmalloc_pagesize})") |
| set(gperftools_tcmalloc_pagesize ${default_tcmalloc_pagesize}) |
| endif() |
| if (gperftools_tcmalloc_pagesize EQUAL 4) |
| set(TCMALLOC_PAGE_SIZE_SHIFT 12) |
| elseif(gperftools_tcmalloc_pagesize EQUAL 8) |
| # default page size |
| elseif(gperftools_tcmalloc_pagesize EQUAL 16) |
| set(TCMALLOC_PAGE_SIZE_SHIFT 14) |
| elseif(gperftools_tcmalloc_pagesize EQUAL 32) |
| set(TCMALLOC_PAGE_SIZE_SHIFT 15) |
| elseif(gperftools_tcmalloc_pagesize EQUAL 64) |
| set(TCMALLOC_PAGE_SIZE_SHIFT 16) |
| elseif(gperftools_tcmalloc_pagesize EQUAL 128) |
| set(TCMALLOC_PAGE_SIZE_SHIFT 17) |
| elseif(gperftools_tcmalloc_pagesize EQUAL 256) |
| set(TCMALLOC_PAGE_SIZE_SHIFT 18) |
| else() |
| message(WARNING |
| "${gperftools_tcmalloc_pagesize}K size not supported, using default tcmalloc page size.") |
| endif() |
| |
| set(gperftools_tcmalloc_alignment ${DEFAULT_TCMALLOC_ALIGNMENT} |
| CACHE STRING "Set the tcmalloc allocation alignment") |
| set_property(CACHE gperftools_tcmalloc_alignment PROPERTY STRINGS "8" "16") |
| if(NOT gperftools_tcmalloc_alignment STREQUAL "8" AND |
| NOT gperftools_tcmalloc_alignment STREQUAL "16") |
| message(WARNING |
| "Invalid gperftools_tcmalloc_alignment (${gperftools_tcmalloc_alignment}), " |
| "setting to default value (${DEFAULT_TCMALLOC_ALIGNMENT})") |
| set(gperftools_tcmalloc_alignment ${DEFAULT_TCMALLOC_ALIGNMENT}) |
| endif() |
| if(gperftools_tcmalloc_alignment STREQUAL "8") |
| set(TCMALLOC_ALIGN_8BYTES ON) |
| endif() |
| |
| # AX_CXX_COMPILE_STDCXX(11, ext, mandatory) |
| if(cxx_std_17 IN_LIST CMAKE_CXX_COMPILE_FEATURES) |
| set(CMAKE_CXX_STANDARD 17) # std::align_val_t |
| else() |
| set(CMAKE_CXX_STANDARD 11) |
| endif() |
| set(CMAKE_CXX_STANDARD_REQUIRED ON) |
| set(CMAKE_CXX_EXTENSIONS ON) |
| |
| # AX_C___ATTRIBUTE__ |
| check_c_source_compiles("#include <stdlib.h> |
| static void foo(void) __attribute__ ((unused)); |
| void foo(void) { exit(1); } |
| int main() { return 0; }" |
| HAVE___ATTRIBUTE__) |
| |
| check_c_source_compiles("#include <stdlib.h> |
| void foo(void) __attribute__((aligned(128))); |
| void foo(void) { exit(1); } |
| int main() { return 0; }" |
| HAVE___ATTRIBUTE__ALIGNED_FN) |
| |
| set(CMAKE_EXTRA_INCLUDE_FILES "malloc.h") |
| check_type_size("struct mallinfo" STRUCT_MALLINFO LANGUAGE CXX) |
| check_type_size("struct mallinfo2" STRUCT_MALLINFO2 LANGUAGE CXX) |
| set(CMAKE_EXTRA_INCLUDE_FILES "elf.h") |
| check_type_size("Elf32_Versym" ELF32_VERSYM LANGUAGE CXX) # for vdso_support.h |
| set(CMAKE_EXTRA_INCLUDE_FILES) |
| check_function_exists("sbrk" HAVE_SBRK) # for tcmalloc to get memory |
| check_function_exists("__sbrk" HAVE___SBRK) # for tcmalloc to get memory |
| check_function_exists("geteuid" HAVE_GETEUID) # for turning off services when run as root |
| check_function_exists("fork" HAVE_FORK) # for the pthread_atfork setup |
| check_include_file("features.h" HAVE_FEATURES_H) # for vdso_support.h, Where __GLIBC__ is defined |
| check_include_file("malloc.h" HAVE_MALLOC_H) # some systems define stuff there, others not |
| check_include_file("glob.h" HAVE_GLOB_H) # for heap-profile-table (cleaning up profiles) |
| check_include_file("execinfo.h" HAVE_EXECINFO_H) # for stacktrace? and heapchecker_unittest |
| check_include_file("unwind.h" HAVE_UNWIND_H) # for stacktrace |
| check_include_file("sched.h" HAVE_SCHED_H) # for being nice in our spinlock code |
| check_include_file("sys/syscall.h" HAVE_SYS_SYSCALL_H) |
| check_include_file("sys/socket.h" HAVE_SYS_SOCKET_H) # optional; for forking out to symbolizer |
| check_include_file("sys/wait.h" HAVE_SYS_WAIT_H) # optional; for forking out to symbolizer |
| check_include_file("poll.h" HAVE_POLL_H) # optional; for forking out to symbolizer |
| check_include_file("fcntl.h" HAVE_FCNTL_H) # for tcmalloc_unittest |
| check_include_file("grp.h" HAVE_GRP_H) # for heapchecker_unittest |
| check_include_file("pwd.h" HAVE_PWD_H) # for heapchecker_unittest |
| check_include_file("sys/resource.h" HAVE_SYS_RESOURCE_H) # for memalign_unittest.cc |
| check_include_file("sys/cdefs.h" HAVE_SYS_CDEFS_H) # Where glibc defines __THROW |
| |
| check_include_file("sys/ucontext.h" HAVE_SYS_UCONTEXT_H) |
| check_include_file("ucontext.h" HAVE_UCONTEXT_H) |
| check_include_file("cygwin/signal.h" HAVE_CYGWIN_SIGNAL_H) # ucontext on cywgin |
| check_include_file("asm/ptrace.h" HAVE_ASM_PTRACE_H) # get ptrace macros, e.g. PT_NIP |
| |
| check_include_file("unistd.h" HAVE_UNISTD_H) |
| # We also need <ucontext.h>/<sys/ucontext.h>, but we get those from |
| # AC_PC_FROM_UCONTEXT, below. |
| |
| # We override a lot of memory allocation routines, not all of which are |
| # standard. For those the system doesn't declare, we'll declare ourselves. |
| set(CMAKE_REQUIRED_DEFINITIONS -D_XOPEN_SOURCE=600) |
| check_symbol_exists("cfree" "stdlib.h;malloc.h" HAVE_DECL_CFREE) |
| check_symbol_exists("posix_memalign" "stdlib.h;malloc.h" HAVE_DECL_POSIX_MEMALIGN) |
| check_symbol_exists("memalign" "stdlib.h;malloc.h" HAVE_DECL_MEMALIGN) |
| check_symbol_exists("valloc" "stdlib.h;malloc.h" HAVE_DECL_VALLOC) |
| check_symbol_exists("pvalloc" "stdlib.h;malloc.h" HAVE_DECL_PVALLOC) |
| set(CMAKE_REQUIRED_DEFINITIONS) |
| |
| if(HAVE_STRUCT_MALLINFO) |
| set(HAVE_STRUCT_MALLINFO 1) |
| else() |
| set(HAVE_STRUCT_MALLINFO 0) |
| endif() |
| |
| if(HAVE_STRUCT_MALLINFO2) |
| set(HAVE_STRUCT_MALLINFO2 1) |
| else() |
| set(HAVE_STRUCT_MALLINFO2 0) |
| endif() |
| |
| # We hardcode HAVE_MMAP to 1. There are no interesting systems anymore |
| # without functional mmap. And our windows (except mingw) builds |
| # aren't using autoconf. So we keep HAVE_MMAP define, but only to |
| # distingush windows and rest. |
| if(NOT WIN32) |
| set(HAVE_MMAP 1) |
| endif() |
| |
| # Some tests test the behavior of .so files, and only make sense for dynamic. |
| option(GPERFTOOLS_BUILD_STATIC "Enable Static" ON) |
| |
| if(gperftools_enable_libunwind) |
| check_include_file("libunwind.h" HAVE_LIBUNWIND_H) |
| if(HAVE_LIBUNWIND_H) |
| find_library(libunwind_location NAMES unwind) |
| if(libunwind_location) |
| check_library_exists( |
| unwind backtrace ${libunwind_location} have_libunwind) |
| endif() |
| if(have_libunwind) |
| set(unwind_libs ${libunwind_location}) |
| set(will_use_libunwind ON) |
| set(USE_LIBUNWIND 1) |
| endif() |
| endif() |
| endif() |
| |
| # See if the compiler supports -Wno-unused-result. |
| # Newer ubuntu's turn on -D_FORTIFY_SOURCE=2, enabling |
| # __attribute__((warn_unused_result)) for things like write(), |
| # which we don't care about. |
| check_c_compiler_flag("-Wno-unused-result" have_w_no_unused_result) |
| |
| check_c_compiler_flag("-fno-omit-frame-pointer -momit-leaf-frame-pointer" have_omit_leaf_fp) |
| check_c_source_compiles(" |
| #if !(__i386__ || __x86_64__ || __riscv || __aarch64__) |
| #error unsupported arch |
| #endif |
| int main() { return 0; } |
| " |
| use_omit_leaf_fp) |
| |
| if (use_omit_leaf_fp) |
| add_compile_options(-fno-omit-frame-pointer -momit-leaf-frame-pointer) |
| endif() |
| |
| option(gperftools_dynamic_sized_delete_support |
| "Try to build run-time switch for sized delete operator" |
| OFF) |
| if(gperftools_dynamic_sized_delete_support) |
| set(ENABLE_DYNAMIC_SIZED_DELETE 1) |
| endif() |
| |
| option(gperftools_sized_delete "Build sized delete operator" OFF) |
| if(gperftools_sized_delete) |
| set(ENABLE_SIZED_DELETE 1) |
| endif() |
| |
| if(NOT MSVC) |
| set(CMAKE_REQUIRED_FLAGS -fsized-deallocation) |
| check_cxx_source_compiles(" |
| #include <new> |
| int main() { (::operator delete)(0, 256); return 0; }" |
| have_sized_deallocation) |
| set(CMAKE_REQUIRED_FLAGS) |
| endif() |
| |
| check_cxx_source_compiles(" |
| #include <new> |
| int main() { (::operator delete)((::operator new)(256, std::align_val_t(16)), std::align_val_t(16)); return 0; }" |
| HAVE_STD_ALIGN_VAL_T) |
| if(HAVE_STD_ALIGN_VAL_T) |
| set(HAVE_STD_ALIGN_VAL_T 1) |
| set(ENABLE_ALIGNED_NEW_DELETE 1) |
| else() |
| set(HAVE_STD_ALIGN_VAL_T 0) |
| endif() |
| |
| check_cxx_compiler_flag("-faligned-new" have_f_aligned_new) |
| |
| check_c_source_compiles(" |
| #include <unwind.h> |
| int main() |
| { |
| #if __APPLE__ || __FreeBSD__ |
| #error OSX _Unwind_Backtrace recurses back to malloc |
| #endif |
| &_Unwind_Backtrace; |
| return 0; |
| }" |
| HAVE_UNWIND_BACKTRACE) |
| |
| if(enable_backtrace) |
| set(default_emergency_malloc ON) |
| else() |
| set(default_emergency_malloc OFF) |
| endif() |
| |
| if(will_use_libunwind AND ARM) |
| set(default_emergency_malloc ON) |
| endif() |
| |
| option(gperftools_emergency_malloc |
| "Build emergency malloc" |
| ${default_emergency_malloc}) |
| |
| check_c_source_compiles( |
| "int main() { return __builtin_expect(main != 0, 1); }" |
| HAVE_BUILTIN_EXPECT) |
| |
| check_c_source_compiles(" |
| #include <unistd.h> |
| int main() |
| { |
| char** env = __environ; |
| return 0; |
| }" |
| HAVE___ENVIRON) |
| |
| # If we support __thread, that can speed up tcmalloc a bit. |
| # Note, however, that our code tickles a bug in gcc < 4.1.2 |
| # involving TLS and -fPIC (which our libraries will use) on x86: |
| # http://gcc.gnu.org/ml/gcc-bugs/2006-09/msg02275.html |
| # |
| # And mingw also does compile __thread but resultant code actually |
| # fails to work correctly at least in some not so ancient version: |
| # http://mingw-users.1079350.n2.nabble.com/gcc-4-4-multi-threaded-exception-handling-amp-thread-specifier-not-working-td3440749.html |
| # |
| # Also it was reported that earlier gcc versions for mips compile |
| # __thread but it doesn't really work |
| if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU" AND |
| CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.1.2") |
| message(WARNING "gcc has this bug: http://gcc.gnu.org/ml/gcc-bugs/2006-09/msg02275.html") |
| elseif(APPLE) |
| message(WARNING "OSX __thread support is known to call malloc which makes " |
| "it unsafe to use from malloc replacement") |
| elseif(MINGW) |
| message(WARNING "mingw doesn't really support tls") |
| elseif(MSVC) |
| check_c_source_compiles("static __declspec(thread) int p = 0; int main() {}" HAVE_TLS) |
| else() |
| check_c_source_compiles("static __thread int p = 0; int main() {}" HAVE_TLS) |
| endif() |
| |
| if(NEED_NANOSLEEP) |
| check_c_source_compiles( |
| "#include <time.h> |
| int main() |
| { static struct timespec ts; nanosleep(&ts, NULL); return 0; }" |
| nanosleep_ok) |
| if(NOT nanosleep_ok) |
| set(CMAKE_REQUIRED_LIBRARIES rt) |
| check_c_source_compiles( |
| "#include <time.h> |
| int main() |
| { static struct timespec ts; nanosleep(&ts, NULL); return 0; }" |
| nanosleep_ok) |
| if(nanosleep_ok) |
| set(nanosleep_libs rt) |
| else() |
| message(FATAL_ERROR "cannot find the nanosleep function") |
| endif() |
| set(CMAKE_REQUIRED_LIBRARIES) |
| endif() |
| endif() |
| |
| # Nanosleep requires extra libraries on some architectures (solaris). |
| # This sets NANOSLEEP_LIBS. nanosleep doesn't exist on mingw, which |
| # is fine for us because we don't compile libspinlock, which uses it. |
| if(enable_backtrace) |
| check_symbol_exists("backtrace" "execinfo.h" HAVE_DECL_BACKTRACE) |
| check_function_exists("backtrace" backtrace_exists) |
| if(NOT backtrace_exists) |
| set(CMAKE_REQUIRED_LIBRARIES execinfo) |
| check_function_exists("backtrace" backtrace_exists) |
| set(CMAKE_REQUIRED_LIBRARIES) |
| if(backtrace_exists) |
| list(INSERT unwind_libs 0 execinfo) |
| endif() |
| endif() |
| endif() |
| |
| find_package(Threads REQUIRED) |
| set(HAVE_PTHREAD ${CMAKE_USE_PTHREADS_INIT}) |
| |
| if(FreeBSD) |
| set(PTHREADS_CRASHES_IF_RUN_TOO_EARLY ON) |
| endif() |
| |
| set(libstdcxx_la_linker_flag) |
| if(EXISTS /usr/sfw/lib/libstdc++.la) |
| file(READ /usr/sfw/lib/libstdc++.la _ch LIMIT 1) |
| if(string(LENGTH _ch) EQUAL 0) |
| set(libstdcxx_la_linker_flag "-L${CMAKE_CURRENT_SOURCE_DIR}/src/solaris") |
| endif() |
| endif() |
| |
| check_variable_exists("program_invocation_name" HAVE_PROGRAM_INVOCATION_NAME) |
| |
| if(MINGW) |
| check_symbol_exists("sleep" "unistd.h" HAVE_DECL_SLEEP) |
| check_symbol_exists("nanosleep" "time.h" HAVE_DECL_NANOSLEEP) |
| endif() |
| |
| if(LINUX) |
| check_c_source_compiles(" |
| #include <signal.h> |
| #include <time.h> |
| int main() { return SIGEV_THREAD_ID || CLOCK_THREAD_CPUTIME_ID; }" |
| HAVE_LINUX_SIGEV_THREAD_ID) |
| endif() |
| |
| # Disable large allocation report by default. |
| option(gperftools_enable_large_alloc_report |
| "Report very large allocations to stderr" |
| OFF) |
| set(ENABLE_LARGE_ALLOC_REPORT ${gperftools_enable_large_alloc_report}) |
| |
| # Enable aggressive decommit by default |
| option(gperftools_enable_aggressive_decommit_by_default |
| "Enable aggressive decommit by default" |
| OFF) |
| set(ENABLE_AGGRESSIVE_DECOMMIT_BY_DEFAULT ${gperftools_enable_aggressive_decommit_by_default}) |
| |
| |
| configure_file(cmake/config.h.in ${CMAKE_CURRENT_BINARY_DIR}/config.h @ONLY) |
| configure_file(cmake/tcmalloc.h.in |
| ${CMAKE_CURRENT_BINARY_DIR}/gperftools/tcmalloc.h |
| @ONLY) |
| |
| if(GPERFTOOLS_BUILD_CPU_PROFILER OR |
| GPERFTOOLS_BUILD_HEAP_PROFILER OR |
| GPERFTOOLS_BUILD_HEAP_CHECKER) |
| set(WITH_STACK_TRACE ON) |
| endif() |
| |
| # Based on Makefile.am |
| |
| set(CMAKE_POSITION_INDEPENDENT_CODE ON) |
| set(CMAKE_INCLUDE_CURRENT_DIR ON) |
| # This is so we can #include <gperftools/foo> |
| include_directories($<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/src>) |
| |
| if(NOT WITH_STACK_TRACE) |
| add_compile_definitions(NO_TCMALLOC_SAMPLES) |
| endif() |
| |
| # These are good warnings to turn on by default. |
| if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU") |
| set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -Wwrite-strings -Woverloaded-virtual -Wno-sign-compare") |
| endif() |
| |
| if(have_w_no_unused_result) |
| add_compile_options(-Wno-unused-result) |
| endif() |
| |
| if(have_sized_deallocation) |
| set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fsized-deallocation") |
| endif() |
| |
| if(have_f_aligned_new) |
| add_compile_options(-faligned-new) |
| endif() |
| |
| # LIBSTDCXX_LA_LINKER_FLAG is used to fix a Solaris bug. |
| add_link_options(${libstdcxx_la_linker_flag}) |
| |
| option( |
| gperftools_enable_frame_pointers |
| "Compile with -fno-omit-frame-pointer (see INSTALL)" |
| OFF) |
| |
| if(gperftools_enable_frame_pointers) |
| add_compile_options(-fno-omit-frame-pointer -DFORCED_FRAME_POINTERS) |
| endif() |
| |
| # For windows systems (at least, mingw), we need to tell all our |
| # tests to link in libtcmalloc using -u. This is because libtcmalloc |
| # accomplishes its tasks via patching, leaving no work for the linker |
| # to identify, so the linker will ignore libtcmalloc by default unless |
| # we explicitly create a dependency via -u. |
| set(TCMALLOC_FLAGS) |
| if(MINGW) |
| list(APPEND TCMALLOC_FLAGS "-Wl,-u__tcmalloc") |
| endif() |
| |
| set(googleinclude_HEADERS |
| src/google/heap-checker.h |
| src/google/heap-profiler.h |
| src/google/malloc_extension.h |
| src/google/malloc_extension_c.h |
| src/google/malloc_hook.h |
| src/google/malloc_hook_c.h |
| src/google/profiler.h |
| src/google/stacktrace.h |
| src/google/tcmalloc.h |
| ) |
| install(FILES ${googleinclude_HEADERS} |
| DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}/google |
| ) |
| |
| # This is a 'convenience library' -- it's not actually installed or anything |
| set(LOGGING_INCLUDES |
| src/base/logging.h |
| src/base/commandlineflags.h |
| src/base/basictypes.h |
| src/base/dynamic_annotations.h) |
| set(liblogging_la_SOURCES src/base/logging.cc |
| src/base/dynamic_annotations.cc |
| ${LOGGING_INCLUDES}) |
| add_library(logging STATIC ${liblogging_la_SOURCES}) |
| |
| set(SYSINFO_INCLUDES |
| src/base/sysinfo.h |
| src/getenv_safe.h |
| src/base/logging.h |
| src/base/commandlineflags.h |
| src/base/basictypes.h) |
| set(libsysinfo_la_SOURCES src/base/sysinfo.cc |
| ${SYSINFO_INCLUDES}) |
| set(libsysinfo_la_LIBADD ${NANOSLEEP_LIBS}) |
| add_library(sysinfo STATIC ${libsysinfo_la_SOURCES}) |
| target_link_libraries(sysinfo ${libsysinfo_la_LIBADD}) |
| |
| # For MinGW, we use also have to use libwindows Luckily, we need the |
| # windows.a library in exactly the same place we need spinlock.a |
| # (pretty much everywhere), so we can use the same variable name for |
| # each. We can also optimize the MinGW rule a bit by leaving out |
| # files we know aren't used on windows. libwindows also obsoletes the |
| # need for other files like system_alloc.cc. |
| if(MINGW OR MSVC) |
| set(WINDOWS_INCLUDES |
| src/windows/port.h |
| src/windows/mingw.h |
| src/windows/mini_disassembler.h |
| src/windows/mini_disassembler_types.h |
| src/windows/preamble_patcher.h) |
| set(libwindows_la_SOURCES ${WINDOWS_INCLUDES} |
| src/windows/port.cc |
| src/windows/system-alloc.cc |
| src/windows/ia32_modrm_map.cc |
| src/windows/ia32_opcode_map.cc |
| src/windows/mini_disassembler.cc |
| src/windows/patch_functions.cc |
| src/windows/preamble_patcher.cc |
| src/windows/preamble_patcher_with_stub.cc) |
| add_library(windows_object OBJECT ${libwindows_la_SOURCES}) |
| add_library(windows INTERFACE) |
| target_sources(windows INTERFACE $<TARGET_OBJECTS:windows_object>) |
| # patch_functions.cc uses Psapi.lib. MSVC has a #pragma for that, but not us. |
| target_link_libraries(windows INTERFACE psapi) |
| |
| set(SPINLOCK_INCLUDES src/base/spinlock.h |
| src/base/spinlock_internal.h |
| src/base/spinlock_win32-inl.h |
| src/base/spinlock_linux-inl.h |
| src/base/spinlock_posix-inl.h) |
| set(libspinlock_la_SOURCES src/base/spinlock.cc |
| src/base/spinlock_internal.cc |
| ${SPINLOCK_INCLUDES}) |
| add_library(spinlock STATIC ${libspinlock_la_SOURCES}) |
| set(LIBSPINLOCK windows spinlock sysinfo logging) |
| # We also need to tell mingw that sysinfo.cc needs shlwapi.lib. |
| # (We do this via a #pragma for msvc, but need to do it here for mingw). |
| target_link_libraries(sysinfo shlwapi) |
| # spinlock uses WaitOnAddress et al. We need to link to synchronization.lib |
| # (We also do this via a #pragma for msvc, but need to do it here for mingw). |
| target_link_libraries(spinlock synchronization) |
| |
| else() |
| set(SPINLOCK_INCLUDES src/base/spinlock.h |
| src/base/spinlock_internal.h) |
| set(libspinlock_la_SOURCES src/base/spinlock.cc |
| src/base/spinlock_internal.cc |
| ${SPINLOCK_INCLUDES}) |
| add_library(spinlock STATIC ${libspinlock_la_SOURCES}) |
| target_link_libraries(spinlock ${nanosleep_libs}) |
| set(LIBSPINLOCK spinlock sysinfo logging) |
| set(TCMALLOC_CC "src/tcmalloc.cc") |
| set(SYSTEM_ALLOC_CC "src/system-alloc.cc") |
| |
| endif() |
| |
| if(BUILD_TESTING) |
| set(LOW_LEVEL_ALLOC_UNITTEST_INCLUDES |
| src/base/low_level_alloc.h |
| src/base/basictypes.h |
| src/gperftools/malloc_hook.h |
| src/gperftools/malloc_hook_c.h |
| src/malloc_hook-inl.h |
| ${SPINLOCK_INCLUDES} |
| ${LOGGING_INCLUDES}) |
| set(low_level_alloc_unittest_SOURCES src/base/low_level_alloc.cc |
| src/malloc_hook.cc |
| src/mmap_hook.cc |
| src/tests/low_level_alloc_unittest.cc |
| ${LOW_LEVEL_ALLOC_UNITTEST_INCLUDES}) |
| if(MSVC OR MINGW) |
| list(APPEND low_level_alloc_unittest_SOURCES src/windows/port.cc) |
| endif() |
| add_executable(low_level_alloc_unittest ${low_level_alloc_unittest_SOURCES}) |
| # By default, MallocHook takes stack traces for use by the heap-checker. |
| # We don't need that functionality here, so we turn it off to reduce deps. |
| target_compile_definitions(low_level_alloc_unittest PRIVATE NO_TCMALLOC_SAMPLES) |
| target_link_libraries(low_level_alloc_unittest spinlock sysinfo logging) |
| add_test(low_level_alloc_unittest low_level_alloc_unittest) |
| endif() |
| |
| ### ------- stack trace |
| |
| if(WITH_STACK_TRACE) |
| |
| set(S_STACKTRACE_INCLUDES src/stacktrace_impl_setup-inl.h |
| src/stacktrace_generic-inl.h |
| src/stacktrace_libgcc-inl.h |
| src/stacktrace_libunwind-inl.h |
| src/stacktrace_arm-inl.h |
| src/stacktrace_powerpc-inl.h |
| src/stacktrace_powerpc-darwin-inl.h |
| src/stacktrace_powerpc-linux-inl.h |
| src/stacktrace_win32-inl.h |
| src/stacktrace_instrument-inl.h |
| src/base/elf_mem_image.h |
| src/base/vdso_support.h) |
| |
| set(SG_STACKTRACE_INCLUDES src/gperftools/stacktrace.h) |
| set(STACKTRACE_INCLUDES ${S_STACKTRACE_INCLUDES} ${SG_STACKTRACE_INCLUDES}) |
| list(APPEND perftoolsinclude_HEADERS ${SG_STACKTRACE_INCLUDES}) |
| |
| ### Making the library |
| set(libstacktrace_la_SOURCES src/stacktrace.cc |
| src/base/elf_mem_image.cc |
| src/base/vdso_support.cc |
| ${STACKTRACE_INCLUDES}) |
| add_library(stacktrace INTERFACE) |
| add_library(stacktrace_object OBJECT ${libstacktrace_la_SOURCES}) |
| target_link_libraries(stacktrace INTERFACE ${unwind_libs} ${LIBSPINLOCK}) |
| target_sources(stacktrace INTERFACE $<TARGET_OBJECTS:stacktrace_object>) |
| |
| set(libfake_stacktrace_scope_la_SOURCES src/fake_stacktrace_scope.cc) |
| add_library(fake_stacktrace_scope ${libfake_stacktrace_scope_la_SOURCES}) |
| |
| if(BUILD_TESTING) |
| set(STACKTRACE_UNITTEST_INCLUDES src/config_for_unittests.h |
| src/base/commandlineflags.h |
| ${STACKTRACE_INCLUDES} |
| ${LOGGING_INCLUDES}) |
| |
| add_executable(stacktrace_unittest src/tests/stacktrace_unittest.cc ${libstacktrace_la_SOURCES}) |
| target_link_libraries(stacktrace_unittest logging fake_stacktrace_scope ${LIBSPINLOCK} ${unwind_libs}) |
| target_compile_definitions(stacktrace_unittest PRIVATE STACKTRACE_IS_TESTED) |
| add_test(stacktrace_unittest stacktrace_unittest) |
| |
| add_executable(check_address_unittest src/tests/check_address_test.cc) |
| target_link_libraries(check_address_unittest spinlock sysinfo logging) |
| add_test(check_address_unittest check_address_unittest) |
| endif() |
| |
| endif() |
| |
| ### ------- pprof |
| |
| # If we are not compiling with stacktrace support, pprof is worthless |
| if(WITH_STACK_TRACE) |
| install(FILES src/pprof DESTINATION ${CMAKE_INSTALL_BINDIR} RENAME pprof-symbolize) |
| |
| if(BUILD_TESTING) |
| add_test(NAME pprof_unittest |
| COMMAND "${CMAKE_CURRENT_SOURCE_DIR}/src/pprof" -test |
| VERBATIM) |
| list(APPEND TESTS_ENVIRONMENT "PPROF_PATH=${CMAKE_CURRENT_SOURCE_DIR}/src/pprof") |
| endif() |
| if(INSTALL_PPROF) |
| install(FILES src/pprof DESTINATION ${CMAKE_INSTALL_BINDIR}) |
| endif() |
| endif() |
| |
| ### ------- tcmalloc_minimal (thread-caching malloc) |
| |
| ### The header files we use. We divide into categories based on directory |
| set(S_TCMALLOC_MINIMAL_INCLUDES src/common.h |
| src/internal_logging.h |
| src/system-alloc.h |
| src/packed-cache-inl.h |
| ${SPINLOCK_INCLUDES} |
| src/tcmalloc_guard.h |
| src/base/commandlineflags.h |
| src/base/basictypes.h |
| src/safe_strerror.h |
| src/pagemap.h |
| src/sampler.h |
| src/central_freelist.h |
| src/linked_list.h |
| src/libc_override.h |
| src/libc_override_gcc_and_weak.h |
| src/libc_override_glibc.h |
| src/libc_override_osx.h |
| src/libc_override_redefine.h |
| src/page_heap.h |
| src/page_heap_allocator.h |
| src/span.h |
| src/static_vars.h |
| src/symbolize.h |
| src/thread_cache.h |
| src/stack_trace_table.h |
| src/base/thread_annotations.h |
| src/malloc_hook-inl.h) |
| set(SG_TCMALLOC_MINIMAL_INCLUDES src/gperftools/malloc_hook.h |
| src/gperftools/malloc_hook_c.h |
| src/gperftools/malloc_extension.h |
| src/gperftools/malloc_extension_c.h |
| src/gperftools/nallocx.h) |
| set(TCMALLOC_MINIMAL_INCLUDES ${S_TCMALLOC_MINIMAL_INCLUDES} ${SG_TCMALLOC_MINIMAL_INCLUDES} ${SG_STACKTRACE_INCLUDES}) |
| list(APPEND perftoolsinclude_HEADERS ${SG_TCMALLOC_MINIMAL_INCLUDES}) |
| |
| ### Making the library |
| |
| set(libtcmalloc_minimal_internal_la_SOURCES src/common.cc |
| src/internal_logging.cc |
| ${SYSTEM_ALLOC_CC} |
| src/memfs_malloc.cc |
| src/safe_strerror.cc |
| src/central_freelist.cc |
| src/page_heap.cc |
| src/sampler.cc |
| src/span.cc |
| src/stack_trace_table.cc |
| src/static_vars.cc |
| src/symbolize.cc |
| src/thread_cache.cc |
| src/malloc_hook.cc |
| src/malloc_extension.cc |
| ${TCMALLOC_MINIMAL_INCLUDES}) |
| add_library(tcmalloc_minimal_internal_object OBJECT ${libtcmalloc_minimal_internal_la_SOURCES}) |
| # We #define NO_TCMALLOC_SAMPLES, since sampling is turned off for _minimal. |
| target_compile_definitions(tcmalloc_minimal_internal_object PRIVATE NO_TCMALLOC_SAMPLES NO_HEAP_CHECK NDEBUG) |
| add_library(tcmalloc_minimal_internal INTERFACE) |
| target_link_libraries(tcmalloc_minimal_internal INTERFACE ${LIBSPINLOCK}) |
| target_sources(tcmalloc_minimal_internal INTERFACE $<TARGET_OBJECTS:tcmalloc_minimal_internal_object>) |
| |
| set(libtcmalloc_minimal_la_SOURCES ${TCMALLOC_CC} ${TCMALLOC_MINIMAL_INCLUDES}) |
| set(libtcmalloc_minimal_la_DEFINES NO_TCMALLOC_SAMPLES NDEBUG) |
| add_library(tcmalloc_minimal SHARED ${libtcmalloc_minimal_la_SOURCES}) |
| target_compile_definitions(tcmalloc_minimal PRIVATE ${libtcmalloc_minimal_la_DEFINES}) |
| set(libtcmalloc_minimal_la_LIBADD tcmalloc_minimal_internal) |
| target_link_libraries(tcmalloc_minimal PRIVATE tcmalloc_minimal_internal Threads::Threads) |
| if(MINGW) |
| target_link_libraries(tcmalloc_minimal PRIVATE stacktrace) |
| endif() |
| set_target_properties(tcmalloc_minimal PROPERTIES |
| VERSION ${TCMALLOC_SO_VERSION} |
| SOVERSION ${TCMALLOC_SO_VERSION}) |
| install(TARGETS tcmalloc_minimal) |
| if(GPERFTOOLS_BUILD_STATIC) |
| add_library(tcmalloc_minimal_static STATIC ${libtcmalloc_minimal_internal_la_SOURCES}) |
| target_compile_definitions(tcmalloc_minimal_static PRIVATE NO_TCMALLOC_SAMPLES NDEBUG) |
| target_link_libraries(tcmalloc_minimal_static PRIVATE tcmalloc_minimal_internal Threads::Threads) |
| if(MINGW) |
| target_link_libraries(tcmalloc_minimal_static PRIVATE stacktrace) |
| endif() |
| if(NOT MSVC) |
| set_target_properties(tcmalloc_minimal_static PROPERTIES |
| OUTPUT_NAME tcmalloc_minimal) |
| endif() |
| install(TARGETS tcmalloc_minimal_static) |
| endif() |
| |
| if(BUILD_TESTING) |
| set(tcmalloc_minimal_unittest_SOURCES |
| src/tests/tcmalloc_unittest.cc |
| src/tests/testutil.h src/tests/testutil.cc |
| ${TCMALLOC_UNITTEST_INCLUDES}) |
| set(tcmalloc_minimal_unittest_LDADD |
| ${TCMALLOC_FLAGS} Threads::Threads logging) |
| # We want libtcmalloc last on the link line, but due to a bug in |
| # libtool involving convenience libs, they need to come last on the |
| # link line in order to get dependency ordering right. This is ok: |
| # convenience libraries are .a's, so tcmalloc is still the last .so. |
| # We also put pthreads after tcmalloc, because some pthread |
| # implementations define their own malloc, and we need to go on the |
| # first linkline to make sure our malloc 'wins'. |
| add_executable(tcmalloc_minimal_unittest ${tcmalloc_minimal_unittest_SOURCES}) |
| target_link_libraries(tcmalloc_minimal_unittest tcmalloc_minimal ${tcmalloc_minimal_unittest_LDADD}) |
| add_test(tcmalloc_minimal_unittest tcmalloc_minimal_unittest) |
| |
| if(NOT MSVC) |
| add_executable(tcm_min_asserts_unittest |
| src/tests/tcmalloc_unittest.cc |
| src/tests/testutil.cc) |
| target_compile_definitions(tcm_min_asserts_unittest PUBLIC NO_TCMALLOC_SAMPLES NO_HEAP_CHECK) |
| target_link_libraries(tcm_min_asserts_unittest tcmalloc_minimal Threads::Threads) |
| add_test(tcm_min_asserts_unittest tcm_min_asserts_unittest) |
| endif() |
| |
| add_executable(tcmalloc_minimal_large_unittest |
| src/tests/tcmalloc_large_unittest.cc |
| src/tests/testutil.cc |
| src/tests/testutil.h) |
| target_link_libraries(tcmalloc_minimal_large_unittest tcmalloc_minimal Threads::Threads) |
| add_test(tcmalloc_minimal_large_unittest tcmalloc_minimal_large_unittest) |
| |
| add_executable(tcmalloc_minimal_large_heap_fragmentation_unittest |
| src/tests/large_heap_fragmentation_unittest.cc) |
| target_link_libraries( |
| tcmalloc_minimal_large_heap_fragmentation_unittest PUBLIC tcmalloc_minimal) |
| add_test(tcmalloc_minimal_large_heap_fragmentation_unittest tcmalloc_minimal_large_heap_fragmentation_unittest) |
| |
| if(MINGW OR MSVC) |
| set(port_src src/windows/port.cc) |
| endif() |
| add_executable(addressmap_unittest |
| src/tests/addressmap_unittest.cc |
| src/addressmap-inl.h |
| ${port_src}) |
| target_link_libraries(addressmap_unittest logging) |
| add_test(addressmap_unittest addressmap_unittest) |
| |
| if(NOT MINGW AND NOT MSVC) |
| add_executable(system_alloc_unittest src/tests/system-alloc_unittest.cc) |
| target_link_libraries(system_alloc_unittest PUBLIC tcmalloc_minimal) |
| add_test(system_alloc_unittest system_alloc_unittest) |
| |
| add_executable(unique_path_unittest src/tests/unique_path_unittest.cc) |
| target_link_libraries(unique_path_unittest PRIVATE sysinfo logging) |
| add_test(unique_path_unittest unique_path_unittest) |
| endif() |
| |
| add_executable(packed_cache_test src/tests/packed-cache_test.cc) |
| target_link_libraries(packed_cache_test PUBLIC tcmalloc_minimal) |
| add_test(packed_cache_test packed_cache_test) |
| |
| add_executable(frag_unittest src/tests/frag_unittest.cc) |
| target_link_libraries(frag_unittest PUBLIC tcmalloc_minimal) |
| add_test(frag_unittest frag_unittest) |
| |
| add_executable(markidle_unittest |
| src/tests/markidle_unittest.cc |
| src/tests/testutil.cc) |
| target_link_libraries(markidle_unittest tcmalloc_minimal Threads::Threads) |
| add_test(markidle_unittest markidle_unittest) |
| |
| add_executable(current_allocated_bytes_test |
| src/tests/current_allocated_bytes_test.cc) |
| target_link_libraries(current_allocated_bytes_test PUBLIC tcmalloc_minimal) |
| add_test(current_allocated_bytes_test current_allocated_bytes_test) |
| |
| add_executable(malloc_hook_test |
| src/tests/malloc_hook_test.cc |
| src/tests/testutil.cc) |
| target_link_libraries(malloc_hook_test tcmalloc_minimal Threads::Threads) |
| add_test(malloc_hook_test malloc_hook_test) |
| |
| add_executable(mmap_hook_test |
| src/tests/mmap_hook_test.cc |
| src/mmap_hook.cc) |
| if(MSVC) |
| # Work around unresolved symbol from src/windows by linking against the entire library |
| target_link_libraries(mmap_hook_test tcmalloc_minimal Threads::Threads) |
| else() |
| target_link_libraries(mmap_hook_test spinlock sysinfo logging) |
| endif() |
| add_test(mmap_hook_test mmap_hook_test) |
| |
| set(malloc_extension_test_SOURCES src/tests/malloc_extension_test.cc |
| src/config_for_unittests.h |
| src/base/logging.h |
| src/gperftools/malloc_extension.h |
| src/gperftools/malloc_extension_c.h) |
| set(malloc_extension_test_LIBADD Threads::Threads ${TCMALLOC_FLAGS}) |
| add_executable(malloc_extension_test ${malloc_extension_test_SOURCES}) |
| target_link_libraries(malloc_extension_test tcmalloc_minimal ${malloc_extension_test_LIBADD}) |
| add_test(malloc_extension_test malloc_extension_test) |
| |
| if(NOT MSVC) |
| add_executable(malloc_extension_c_test src/tests/malloc_extension_c_test.cc) |
| target_link_libraries(malloc_extension_c_test PUBLIC |
| tcmalloc_minimal stdc++ m) |
| if(CMAKE_C_COMPILER_ID STREQUAL "GNU") |
| target_compile_options(malloc_extension_c_test PUBLIC "-ansi") |
| endif() |
| add_test(malloc_extension_c_test malloc_extension_c_test) |
| endif() |
| |
| if(NOT MINGW AND NOT MSVC AND NOT APPLE) |
| set(memalign_unittest_SOURCES src/tests/memalign_unittest.cc |
| src/tcmalloc.h |
| src/config_for_unittests.h |
| src/tests/testutil.h src/tests/testutil.cc) |
| add_executable(memalign_unittest ${memalign_unittest_SOURCES}) |
| target_link_libraries(memalign_unittest tcmalloc_minimal Threads::Threads) |
| add_test(memalign_unittest memalign_unittest) |
| endif() |
| |
| add_executable(page_heap_test src/tests/page_heap_test.cc) |
| if(MSVC) |
| # page_heap_test was changed such that it now refers to an unexported symbol. |
| # Temporary workaround by linking to the .obj files instead of tcmalloc_minimal. |
| # Also see commit e521472 for the VSProj changes. |
| target_link_libraries(page_heap_test PRIVATE tcmalloc_minimal_internal Threads::Threads) |
| else() |
| target_link_libraries(page_heap_test tcmalloc_minimal) |
| endif() |
| add_test(page_heap_test page_heap_test) |
| |
| add_executable(pagemap_unittest src/tests/pagemap_unittest.cc) |
| target_link_libraries(pagemap_unittest PUBLIC tcmalloc_minimal) |
| add_test(pagemap_unittest pagemap_unittest) |
| |
| add_executable(safe_strerror_test src/tests/safe_strerror_test.cc src/safe_strerror.cc) |
| target_link_libraries(safe_strerror_test logging) |
| add_test(safe_strerror_test safe_strerror_test) |
| |
| set(realloc_unittest_SOURCES src/tests/realloc_unittest.cc |
| src/config_for_unittests.h |
| src/base/logging.h) |
| set(realloc_unittest_LDFLAGS Threads::Threads ${TCMALLOC_FLAGS}) |
| add_executable(realloc_unittest ${realloc_unittest_SOURCES}) |
| target_link_libraries(realloc_unittest PUBLIC tcmalloc_minimal ${realloc_unittest_LDFLAGS}) |
| add_test(realloc_unittest realloc_unittest) |
| |
| add_executable(stack_trace_table_test src/tests/stack_trace_table_test.cc) |
| target_link_libraries(stack_trace_table_test PUBLIC tcmalloc_minimal) |
| add_test(stack_trace_table_test stack_trace_table_test) |
| |
| add_executable(thread_dealloc_unittest |
| src/tests/thread_dealloc_unittest.cc |
| src/tests/testutil.cc) |
| target_link_libraries(thread_dealloc_unittest tcmalloc_minimal Threads::Threads) |
| add_test(thread_dealloc_unittest thread_dealloc_unittest) |
| endif() |
| |
| ### ------- tcmalloc_minimal_debug (thread-caching malloc with debugallocation) |
| |
| if(GPERFTOOLS_BUILD_DEBUGALLOC) |
| set(libtcmalloc_minimal_debug_la_SOURCES src/debugallocation.cc |
| ${TCMALLOC_MINIMAL_INCLUDES}) |
| add_library(tcmalloc_minimal_debug SHARED ${libtcmalloc_minimal_debug_la_SOURCES}) |
| target_compile_definitions(tcmalloc_minimal_debug PRIVATE ${libtcmalloc_minimal_la_DEFINES} |
| TCMALLOC_FOR_DEBUGALLOCATION) |
| target_link_libraries(tcmalloc_minimal_debug PRIVATE ${libtcmalloc_minimal_la_LIBADD}) |
| target_link_libraries(tcmalloc_minimal_debug PRIVATE Threads::Threads) |
| install(TARGETS tcmalloc_minimal_debug) |
| set_target_properties(tcmalloc_minimal_debug PROPERTIES |
| VERSION ${TCMALLOC_SO_VERSION} |
| SOVERSION ${TCMALLOC_SO_VERSION}) |
| if(GPERFTOOLS_BUILD_STATIC) |
| add_library(tcmalloc_minimal_debug_static STATIC ${libtcmalloc_minimal_debug_la_SOURCES}) |
| target_compile_definitions(tcmalloc_minimal_debug_static PRIVATE ${libtcmalloc_minimal_la_DEFINES} |
| TCMALLOC_FOR_DEBUGALLOCATION) |
| if(NOT MSVC) |
| set_target_properties(tcmalloc_minimal_debug_static PROPERTIES |
| OUTPUT_NAME tcmalloc_minimal_debug) |
| endif() |
| target_link_libraries(tcmalloc_minimal_debug_static PRIVATE ${libtcmalloc_minimal_la_LIBADD}) |
| install(TARGETS tcmalloc_minimal_debug_static) |
| endif() |
| |
| ### Unittests |
| |
| if(BUILD_TESTING) |
| add_executable(tcmalloc_minimal_debug_unittest ${tcmalloc_minimal_unittest_SOURCES}) |
| target_compile_definitions(tcmalloc_minimal_debug_unittest PRIVATE DEBUGALLOCATION) |
| target_link_libraries(tcmalloc_minimal_debug_unittest tcmalloc_minimal_debug ${tcmalloc_minimal_unittest_LDADD}) |
| add_test(tcmalloc_minimal_debug_unittest tcmalloc_minimal_debug_unittest) |
| |
| add_executable(malloc_extension_debug_test ${malloc_extension_test_SOURCES}) |
| target_link_libraries(malloc_extension_debug_test tcmalloc_minimal_debug ${malloc_extension_test_LIBADD}) |
| add_test(malloc_extension_debug_test malloc_extension_debug_test) |
| |
| if(NOT MINGW AND NOT APPLE) |
| add_executable(memalign_debug_unittest ${memalign_unittest_SOURCES}) |
| target_link_libraries(memalign_debug_unittest |
| tcmalloc_minimal_debug Threads::Threads) |
| add_test(memalign_debug_unittest memalign_debug_unittest) |
| endif() |
| |
| add_executable(realloc_debug_unittest ${realloc_unittest_SOURCES}) |
| target_link_libraries(realloc_debug_unittest PUBLIC tcmalloc_minimal_debug) |
| add_test(realloc_debug_unittest realloc_debug_unittest) |
| |
| if(WITH_STACK_TRACE) |
| add_executable(debugallocation_test src/tests/debugallocation_test.cc) |
| target_link_libraries(debugallocation_test PUBLIC tcmalloc_minimal_debug Threads::Threads) |
| |
| add_test(NAME debugallocation_test |
| COMMAND ${CMAKE_CURRENT_SOURCE_DIR}/src/tests/debugallocation_test.sh) |
| endif() |
| endif() |
| endif() |
| |
| if(NOT MINGW AND NOT MSVC) |
| if(gperftools_build_benchmark) |
| add_library(run_benchmark benchmark/run_benchmark.cc) |
| |
| add_executable(malloc_bench benchmark/malloc_bench.cc) |
| target_link_libraries(malloc_bench run_benchmark ${TCMALLOC_FLAGS}) |
| if(GPERFTOOLS_BUILD_STATIC) |
| target_link_libraries(malloc_bench tcmalloc_minimal_static) |
| else() |
| target_link_libraries(malloc_bench tcmalloc_minimal) |
| endif() |
| add_executable(malloc_bench_shared benchmark/malloc_bench.cc) |
| target_link_libraries(malloc_bench_shared run_benchmark tcmalloc_minimal ${TCMALLOC_FLAGS} Threads::Threads) |
| |
| if(GPERFTOOLS_BUILD_HEAP_CHECKER OR GPERFTOOLS_BUILD_HEAP_PROFILER) |
| add_executable(malloc_bench_shared_full benchmark/malloc_bench.cc) |
| target_link_libraries(malloc_bench_shared_full run_benchmark tcmalloc ${TCMALLOC_FLAGS} Threads::Threads) |
| endif() |
| |
| add_executable(binary_trees benchmark/binary_trees.cc) |
| target_link_libraries(binary_trees Threads::Threads ${TCMALLOC_FLAGS}) |
| if(GPERFTOOLS_BUILD_STATIC) |
| target_link_libraries(binary_trees tcmalloc_minimal_static) |
| else() |
| target_link_libraries(binary_trees tcmalloc_minimal) |
| endif() |
| add_executable(binary_trees_shared benchmark/binary_trees.cc) |
| target_link_libraries(binary_trees_shared tcmalloc_minimal Threads::Threads ${TCMALLOC_FLAGS}) |
| endif() |
| endif() |
| |
| ### ------- tcmalloc (thread-caching malloc + heap profiler + heap checker) |
| |
| if(GPERFTOOLS_BUILD_HEAP_CHECKER OR GPERFTOOLS_BUILD_HEAP_PROFILER) |
| ### The header files we use. We divide into categories based on directory |
| set(S_TCMALLOC_INCLUDES ${S_TCMALLOC_MINIMAL_INCLUDES} |
| ${LOGGING_INCLUDES} |
| src/addressmap-inl.h |
| src/raw_printer.h |
| src/base/googleinit.h |
| src/base/linuxthreads.h |
| src/base/stl_allocator.h |
| src/base/sysinfo.h |
| src/heap-profile-table.h |
| src/heap-profile-stats.h |
| src/maybe_emergency_malloc.h |
| src/mmap_hook.h |
| src/emergency_malloc.h) |
| |
| set(SG_TCMALLOC_INCLUDES src/gperftools/heap-profiler.h |
| src/gperftools/heap-checker.h) |
| set(TCMALLOC_INCLUDES ${S_TCMALLOC_INCLUDES} ${SG_TCMALLOC_MINIMAL_INCLUDES} |
| ${SG_TCMALLOC_INCLUDES} ${SG_STACKTRACE_INCLUDES}) |
| list(APPEND perftoolsinclude_HEADERS ${SG_TCMALLOC_INCLUDES}) |
| |
| if(gperftools_emergency_malloc) |
| set(EMERGENCY_MALLOC_CC |
| src/emergency_malloc.cc |
| src/emergency_malloc_for_stacktrace.cc) |
| set(EMERGENCY_MALLOC_DEFINE ENABLE_EMERGENCY_MALLOC) |
| else() |
| set(EMERGENCY_MALLOC_CC src/fake_stacktrace_scope.cc) |
| endif() |
| |
| ### Making the library |
| |
| set(libtcmalloc_internal_la_SOURCES ${libtcmalloc_minimal_internal_la_SOURCES} |
| ${TCMALLOC_INCLUDES} |
| src/base/low_level_alloc.cc |
| src/mmap_hook.cc |
| src/heap-profile-table.cc |
| src/heap-profiler.cc |
| src/raw_printer.cc |
| ${EMERGENCY_MALLOC_CC} |
| src/memory_region_map.cc) |
| set(libtcmalloc_internal_la_DEFINE NDEBUG ${EMERGENCY_MALLOC_DEFINE}) |
| set(libtcmalloc_internal_la_LIBADD stacktrace Threads::Threads) |
| |
| set(libtcmalloc_la_SOURCES ${TCMALLOC_CC} ${TCMALLOC_INCLUDES}) |
| set(libtcmalloc_la_DEFINE NDEBUG ${EMERGENCY_MALLOC_DEFINE}) |
| set(libtcmalloc_la_LIBADD tcmalloc_internal Threads::Threads) |
| if(GPERFTOOLS_BUILD_HEAP_CHECKER) |
| # heap-checker-bcad is last, in hopes its global ctor will run first. |
| # (Note this is added to libtcmalloc.la, not libtcmalloc_internal.la, |
| # but that's ok; the internal/external distinction is only useful for |
| # cygwin, and cygwin doesn't use HEAP_CHECKER anyway.) |
| set(HEAP_CHECKER_SOURCES src/base/linuxthreads.cc |
| src/heap-checker.cc |
| src/heap-checker-bcad.cc) |
| list(APPEND libtcmalloc_la_SOURCES ${HEAP_CHECKER_SOURCES}) |
| else() |
| list(APPEND libtcmalloc_internal_la_DEFINE NO_HEAP_CHECK) |
| list(APPEND libtcmalloc_la_DEFINE NO_HEAP_CHECK) |
| endif() |
| |
| add_library(tcmalloc_internal_object OBJECT ${libtcmalloc_internal_la_SOURCES}) |
| target_compile_definitions(tcmalloc_internal_object PRIVATE ${libtcmalloc_internal_la_DEFINE}) |
| add_library(tcmalloc_internal INTERFACE) |
| target_sources(tcmalloc_internal INTERFACE $<TARGET_OBJECTS:tcmalloc_internal_object>) |
| target_link_libraries(tcmalloc_internal INTERFACE ${libtcmalloc_internal_la_LIBADD}) |
| |
| add_library(tcmalloc SHARED ${libtcmalloc_la_SOURCES}) |
| target_compile_definitions(tcmalloc PRIVATE ${libtcmalloc_la_DEFINE}) |
| target_link_libraries(tcmalloc ${libtcmalloc_la_LIBADD}) |
| set_target_properties(tcmalloc PROPERTIES |
| VERSION ${TCMALLOC_SO_VERSION} |
| SOVERSION ${TCMALLOC_SO_VERSION}) |
| install(TARGETS tcmalloc) |
| if(GPERFTOOLS_BUILD_STATIC) |
| add_library(tcmalloc_static STATIC ${libtcmalloc_la_SOURCES}) |
| target_compile_definitions(tcmalloc_static PRIVATE ${libtcmalloc_la_DEFINE}) |
| if(NOT MSVC) |
| set_target_properties(tcmalloc_static PROPERTIES OUTPUT_NAME tcmalloc) |
| endif() |
| target_link_libraries(tcmalloc_static PRIVATE ${libtcmalloc_la_LIBADD}) |
| install(TARGETS tcmalloc_static) |
| endif() |
| |
| ### Unittests |
| if(BUILD_TESTING) |
| set(TCMALLOC_UNITTEST_INCLUDES src/config_for_unittests.h |
| src/gperftools/malloc_extension.h) |
| set(tcmalloc_unittest_SOURCES src/tests/tcmalloc_unittest.cc |
| src/tcmalloc.h |
| src/tests/testutil.h src/tests/testutil.cc |
| ${TCMALLOC_UNITTEST_INCLUDES}) |
| set(tcmalloc_unittest_LIBADD ${TCMALLOC_FLAGS} logging Threads::Threads) |
| add_executable(tcmalloc_unittest ${tcmalloc_unittest_SOURCES}) |
| target_link_libraries(tcmalloc_unittest tcmalloc ${tcmalloc_unittest_LIBADD}) |
| add_test(NAME tcmalloc_unittest |
| COMMAND "${CMAKE_CURRENT_SOURCE_DIR}/src/tests/tcmalloc_unittest.sh") |
| |
| # This makes sure it's safe to link in both tcmalloc and |
| # tcmalloc_minimal. (One would never do this on purpose, but perhaps |
| # by accident...) When we can compile libprofiler, we also link it in |
| # to make sure that works too. NOTE: On OS X, it's *not* safe to |
| # link both in (we end up with two copies of every global var, and |
| # the code tends to pick one arbitrarily), so don't run the test there. |
| set(tcmalloc_both_unittest_srcs src/tests/tcmalloc_unittest.cc |
| src/tests/testutil.h src/tests/testutil.cc |
| ${TCMALLOC_UNITTEST_INCLUDES}) |
| if(GPERFTOOLS_BUILD_CPU_PROFILER) |
| set(tcmalloc_both_unittest_ladd tcmalloc tcmalloc_minimal profiler logging Threads::Threads) |
| else() |
| set(tcmalloc_both_unittest_ladd tcmalloc tcmalloc_minimal logging Threads::Threads) |
| endif() |
| if(NOT APPLE) |
| add_executable(tcmalloc_both_unittest ${tcmalloc_both_unittest_srcs}) |
| target_link_libraries(tcmalloc_both_unittest ${TCMALLOC_FLAGS} ${tcmalloc_both_unittest_ladd}) |
| add_test(tcmalloc_both_unittest tcmalloc_both_unittest) |
| endif() |
| |
| add_executable(tcmalloc_large_unittest src/tests/tcmalloc_large_unittest.cc) |
| target_link_libraries(tcmalloc_large_unittest tcmalloc Threads::Threads) |
| add_test(tcmalloc_large_unittest tcmalloc_large_unittest) |
| |
| add_executable(tcmalloc_large_heap_fragmentation_unittest src/tests/large_heap_fragmentation_unittest.cc) |
| target_link_libraries(tcmalloc_large_heap_fragmentation_unittest tcmalloc Threads::Threads) |
| add_test(tcmalloc_large_heap_fragmentation_unittest tcmalloc_large_heap_fragmentation_unittest) |
| |
| add_executable(raw_printer_test src/tests/raw_printer_test.cc) |
| target_link_libraries(raw_printer_test tcmalloc Threads::Threads) |
| add_test(raw_printer_test raw_printer_test) |
| |
| # sampler_test and sampling_test both require sampling to be turned |
| # on, which it's not by default. Use the "standard" value of 2^19. |
| list(APPEND TESTS_ENVIRONMENT TCMALLOC_SAMPLE_PARAMETER=524288) |
| |
| set(sampler_test_SOURCES src/tests/sampler_test.cc |
| src/config_for_unittests.h) |
| set(sampler_test_LIBADD ${TCMALLOC_FLAGS} Threads::Threads m) |
| add_executable(sampler_test ${sampler_test_SOURCES}) |
| target_link_libraries(sampler_test tcmalloc ${sampler_test_LIBADD}) |
| add_test(sampler_test sampler_test) |
| |
| # These unittests often need to run binaries. They're in the current dir |
| list(APPEND TESTS_ENVIRONMENT BINDIR=. TMPDIR=/tmp/perftools) |
| set(SAMPLING_TEST_INCLUDES src/config_for_unittests.h |
| src/base/logging.h |
| src/gperftools/malloc_extension.h) |
| set(sampling_test_SOURCES src/tests/sampling_test.cc |
| ${SAMPLING_TEST_INCLUDES}) |
| add_executable(sampling_test ${sampling_test_SOURCES}) |
| target_link_libraries(sampling_test ${TCMALLOC_FLAGS} tcmalloc Threads::Threads) |
| add_test(NAME sampling_test.sh |
| COMMAND "${CMAKE_CURRENT_SOURCE_DIR}/src/tests/sampling_test.sh" sampling_test) |
| if(GPERFTOOLS_BUILD_HEAP_PROFILER) |
| set(HEAP_PROFILER_UNITTEST_INCLUDES src/config_for_unittests.h |
| src/gperftools/heap-profiler.h) |
| set(heap_profiler_unittest_SOURCES src/tests/heap-profiler_unittest.cc |
| ${HEAP_PROFILER_UNITTEST_INCLUDES}) |
| add_executable(heap_profiler_unittest ${heap_profiler_unittest_SOURCES}) |
| target_link_libraries(heap_profiler_unittest ${TCMALLOC_FLAGS} tcmalloc Threads::Threads) |
| add_test(NAME heap-profiler_unittest.sh |
| COMMAND "${CMAKE_CURRENT_SOURCE_DIR}/src/tests/heap-profiler_unittest.sh" heap-profiler_unittest) |
| |
| # Tests the compatibility include-headers in google/. Requires a function |
| # defined in the heap-profiler, which is why the test lives here. |
| add_executable(simple_compat_test src/tests/simple_compat_test.cc |
| ${googleinclude_HEADERS}) |
| target_link_libraries(simple_compat_test ${TCMALLOC_FLAGS} tcmalloc) |
| add_test(simple_compat_test simple_compat_test) |
| endif() |
| if(GPERFTOOLS_BUILD_HEAP_CHECKER) |
| set(HEAP_CHECKER_UNITTEST_INCLUDES src/config_for_unittests.h |
| src/memory_region_map.h |
| src/base/commandlineflags.h |
| src/base/googleinit.h |
| src/gperftools/heap-checker.h |
| ${LOGGING_INCLUDES}) |
| set(heap_checker_unittest_SOURCES src/tests/heap-checker_unittest.cc |
| ${HEAP_CHECKER_UNITTEST_INCLUDES}) |
| add_executable(heap_checker_unittest ${heap_checker_unittest_SOURCES}) |
| target_link_libraries(heap_checker_unittest ${TCMALLOC_FLAGS} tcmalloc logging Threads::Threads) |
| add_test(heap-checker_unittest heap_checker_unittest) |
| add_test(NAME heap-checker-death_unittest.sh |
| COMMAND "${CMAKE_CURRENT_SOURCE_DIR}/src/tests/heap-checker-death_unittest.sh") |
| endif() |
| endif() |
| |
| endif() |
| |
| ### ------- tcmalloc with debugallocation |
| if(GPERFTOOLS_BUILD_DEBUGALLOC) |
| if(GPERFTOOLS_BUILD_HEAP_CHECKER OR GPERFTOOLS_BUILD_HEAP_PROFILER) |
| add_library(tcmalloc_debug SHARED src/debugallocation.cc ${HEAP_CHECKER_SOURCES} ${TCMALLOC_INCLUDES}) |
| target_compile_definitions(tcmalloc_debug PRIVATE ${libtcmalloc_la_DEFINE} |
| TCMALLOC_FOR_DEBUGALLOCATION) |
| target_link_libraries(tcmalloc_debug PRIVATE ${libtcmalloc_la_LIBADD}) |
| set_target_properties(tcmalloc_debug PROPERTIES |
| VERSION ${TCMALLOC_SO_VERSION} |
| SOVERSION ${TCMALLOC_SO_VERSION}) |
| install(TARGETS tcmalloc_debug) |
| if(GPERFTOOLS_BUILD_STATIC) |
| add_library(tcmalloc_debug_static STATIC src/debugallocation.cc ${HEAP_CHECKER_SOURCES} ${TCMALLOC_INCLUDES}) |
| target_compile_definitions(tcmalloc_debug_static PRIVATE ${libtcmalloc_la_DEFINE} |
| TCMALLOC_FOR_DEBUGALLOCATION) |
| target_link_libraries(tcmalloc_debug_static PRIVATE ${libtcmalloc_la_LIBADD}) |
| if(NOT MSVC) |
| set_target_properties(tcmalloc_debug_static PROPERTIES |
| OUTPUT_NAME tcmalloc_debug) |
| endif() |
| install(TARGETS tcmalloc_debug_static) |
| endif() |
| |
| ### Unittests |
| if(BUILD_TESTING) |
| add_executable(tcmalloc_debug_unittest ${tcmalloc_unittest_SOURCES}) |
| target_compile_definitions(tcmalloc_debug_unittest PRIVATE DEBUGALLOCATION ${tcmalloc_unittest}) |
| target_link_libraries(tcmalloc_debug_unittest tcmalloc_debug ${tcmalloc_unittest_LIBADD}) |
| add_test(tcmalloc_debug_unittest tcmalloc_debug_unittest) |
| |
| add_executable(sampler_debug_test ${sampler_test_SOURCES}) |
| target_link_libraries(sampler_debug_test tcmalloc_debug ${tcmalloc_unittest_LIBADD}) |
| add_test(sampler_debug_test sampler_debug_test) |
| |
| add_executable(sampling_debug_test ${sampling_test_SOURCES}) |
| target_link_libraries(sampling_debug_test ${TCMALLOC_FLAGS} tcmalloc_debug Threads::Threads) |
| add_test(sampling_debug_test.sh "${CMAKE_CURRENT_SOURCE_DIR}/src/tests/sampling_test.sh" sampling_debug_test) |
| |
| if(GPERFTOOLS_BUILD_HEAP_PROFILER) |
| add_executable(heap_profiler_debug_unittest ${heap_profiler_unittest_SOURCES}) |
| target_link_libraries(heap_profiler_debug_unittest ${TCMALLOC_FLAGS} tcmalloc_debug Threads::Threads) |
| add_test(heap-profiler_debug_unittest.sh "${CMAKE_CURRENT_SOURCE_DIR}/src/tests/heap-profiler_unittest.sh" heap-profiler_debug_unittest) |
| endif() |
| if(GPERFTOOLS_BUILD_HEAP_CHECKER) |
| add_executable(heap_checker_debug_unittest ${heap_checker_unittest_SOURCES}) |
| target_link_libraries(heap_checker_debug_unittest ${TCMALLOC_FLAGS} tcmalloc_debug logging Threads::Threads) |
| add_test(heap_checker_debug_unittest heap_checker_debug_unittest) |
| endif() |
| endif() |
| endif() |
| endif() |
| |
| ### ------- CPU profiler |
| if(GPERFTOOLS_BUILD_CPU_PROFILER) |
| ### The header files we use. We divide into categories based on directory |
| set(S_CPU_PROFILER_INCLUDES src/profiledata.h |
| src/profile-handler.h |
| src/getpc.h |
| src/base/basictypes.h |
| src/base/commandlineflags.h |
| src/base/googleinit.h |
| src/base/logging.h |
| src/base/simple_mutex.h |
| src/base/sysinfo.h |
| ${SPINLOCK_INCLUDES} |
| ${LOGGING_INCLUDES}) |
| set(SG_CPU_PROFILER_INCLUDES src/gperftools/profiler.h) |
| set(CPU_PROFILER_INCLUDES ${S_CPU_PROFILER_INCLUDES} ${SG_CPU_PROFILER_INCLUDES} |
| ${SG_STACKTRACE_INCLUDES}) |
| list(APPEND perftoolsinclude_HEADERS ${SG_CPU_PROFILER_INCLUDES}) |
| |
| ### Making the library |
| set(libprofiler_la_SOURCES src/profiler.cc |
| src/profile-handler.cc |
| src/profiledata.cc |
| ${CPU_PROFILER_INCLUDES}) |
| set(libprofiler_la_LIBADD stacktrace fake_stacktrace_scope) |
| add_library(profiler SHARED ${libprofiler_la_SOURCES}) |
| target_link_libraries(profiler PRIVATE ${libprofiler_la_LIBADD}) |
| target_link_libraries(profiler PRIVATE Threads::Threads) |
| set_target_properties(profiler PROPERTIES |
| VERSION ${PROFILER_SO_VERSION} |
| SOVERSION ${PROFILER_SO_VERSION}) |
| install(TARGETS profiler) |
| if(GPERFTOOLS_BUILD_STATIC) |
| add_library(profiler_static STATIC ${libprofiler_la_SOURCES}) |
| target_link_libraries(profiler_static PRIVATE ${libprofiler_la_LIBADD}) |
| if(NOT MSVC) |
| set_target_properties(profiler_static PROPERTIES OUTPUT_NAME profiler) |
| endif() |
| install(TARGETS profiler_static) |
| endif() |
| |
| # See discussion above (under LIBTCMALLOC_MINIMAL) for why we do this. |
| # Basically it's to work around systems where --rpath doesn't work right. |
| set(LIBPROFILER stacktrace profiler) |
| |
| if(BUILD_TESTING) |
| add_executable(getpc_test src/tests/getpc_test.cc src/getpc.h) |
| add_test(getpc_test getpc_test) |
| |
| add_executable(profiledata_unittest src/tests/profiledata_unittest.cc |
| src/profiledata.h |
| src/base/commandlineflags.h |
| src/base/logging.h |
| src/base/basictypes.h) |
| target_link_libraries(profiledata_unittest ${LIBPROFILER}) |
| add_test(profiledata_unittest profiledata_unittest) |
| |
| add_executable(profile_handler_unittest src/tests/profile-handler_unittest.cc |
| src/profile-handler.h) |
| target_link_libraries(profile_handler_unittest ${LIBPROFILER} Threads::Threads) |
| add_test(profile_handler_unittest profile_handler_unittest) |
| |
| add_test(NAME profiler_unittest.sh |
| COMMAND "${CMAKE_CURRENT_SOURCE_DIR}/src/tests/profiler_unittest.sh") |
| set(PROFILER_UNITTEST_INCLUDES src/config_for_unittests.h |
| src/gperftools/profiler.h) |
| set(PROFILER_UNITTEST_SRCS src/tests/profiler_unittest.cc |
| src/tests/testutil.h src/tests/testutil.cc |
| ${PROFILER_UNITTEST_INCLUDES}) |
| add_executable(profiler1_unittest ${PROFILER_UNITTEST_SRCS}) |
| target_compile_definitions(profiler1_unittest PRIVATE NO_THREADS) |
| target_link_libraries(profiler1_unittest ${LIBPROFILER}) |
| add_executable(profiler2_unittest ${PROFILER_UNITTEST_SRCS}) |
| target_compile_definitions(profiler2_unittest PRIVATE NO_THREADS) |
| target_link_libraries(profiler2_unittest stacktrace profiler) |
| add_executable(profiler3_unittest ${PROFILER_UNITTEST_SRCS}) |
| target_link_libraries(profiler3_unittest ${LIBPROFILER} Threads::Threads) |
| add_executable(profiler4_unittest ${PROFILER_UNITTEST_SRCS}) |
| target_link_libraries(profiler4_unittest stacktrace profiler Threads::Threads) |
| endif() |
| endif() |
| |
| install(FILES |
| ${CMAKE_CURRENT_BINARY_DIR}/gperftools/tcmalloc.h |
| ${perftoolsinclude_HEADERS} |
| DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}/gperftools) |
| |
| ### ------- CPU profiler and heap checker, in one! |
| |
| # Ideally, folks who wanted to use both tcmalloc and libprofiler, |
| # could just link them both into their application. But while this |
| # works fine for .so files, it does not for .a files. The easiest way |
| # around this -- and I've tried a bunch of the hard ways -- is to just |
| # to create another set of libraries that has both functionality in it. |
| |
| if(GPERFTOOLS_BUILD_HEAP_PROFILER OR GPERFTOOLS_BUILD_HEAP_CHECKER) |
| if(GPERFTOOLS_BUILD_CPU_PROFILER) |
| add_library(tcmalloc_and_profiler SHARED ${libtcmalloc_la_SOURCES} ${libprofiler_la_SOURCES}) |
| target_compile_definitions(tcmalloc_and_profiler PRIVATE ${libtcmalloc_la_DEFINE}) |
| set_target_properties(tcmalloc_and_profiler PROPERTIES |
| VERSION ${TCMALLOC_AND_PROFILER_SO_VERSION} |
| SOVERSION ${TCMALLOC_AND_PROFILER_SO_VERSION}) |
| # We don't include libprofiler_la_LIBADD here because all it adds is |
| # libstacktrace.la, which we already get via libtcmalloc. Trying to |
| # specify it twice causes link-time duplicate-definition errors. :-( |
| target_link_libraries(tcmalloc_and_profiler PRIVATE ${libtcmalloc_la_LIBADD}) |
| install(TARGETS tcmalloc_and_profiler) |
| if(GPERFTOOLS_BUILD_STATIC) |
| add_library(tcmalloc_and_profiler_static STATIC ${libtcmalloc_la_SOURCES} ${libprofiler_la_SOURCES}) |
| target_compile_definitions(tcmalloc_and_profiler_static PRIVATE ${libtcmalloc_la_DEFINE}) |
| target_link_libraries(tcmalloc_and_profiler_static PRIVATE ${libtcmalloc_la_LIBADD}) |
| if(NOT MSVC) |
| set_target_properties(tcmalloc_and_profiler_static PROPERTIES |
| OUTPUT_NAME tcmalloc_and_profiler) |
| endif() |
| install(TARGETS tcmalloc_and_profiler_static) |
| endif() |
| |
| if(BUILD_TESTING) |
| add_executable(tcmalloc_and_profiler_unittest ${tcmalloc_both_unittest_srcs}) |
| target_link_libraries(tcmalloc_and_profiler_unittest tcmalloc_and_profiler Threads::Threads) |
| add_test(tcmalloc_and_profiler_unittest tcmalloc_and_profiler_unittest) |
| endif() |
| endif() |
| endif() |
| |
| if(BUILD_TESTING) |
| get_directory_property(tests TESTS) |
| message("TESTS_ENVIRONMENT:${TESTS_ENVIRONMENT}") |
| if(TESTS_ENVIRONMENT) |
| foreach(test IN LISTS tests) |
| set_tests_properties(${test} PROPERTIES ENVIRONMENT "${TESTS_ENVIRONMENT}") |
| endforeach() |
| endif() |
| endif() |
| |
| if(MSVC) |
| add_subdirectory(src/windows) |
| endif() |
| |
| ## ^^^^ END OF RULES TO MAKE YOUR LIBRARIES, BINARIES, AND UNITTESTS |
| #TODO rpm deb |
| |
| # http://linux.die.net/man/1/pkg-config, http://pkg-config.freedesktop.org/wiki |
| # I get the description and URL lines from the rpm spec. I use sed to |
| # try to rewrite exec_prefix, libdir, and includedir in terms of |
| # prefix, if possible. |
| set(PTHREAD_FLAGS) |
| foreach(flag IN ITEMS INTERFACE_LINK_LIBRARIES INTERFACE_LINK_OPTIONS INTERFACE_INCLUDE_DIRECTORIES INTERFACE_COMPILE_OPTIONS INTERFACE_COMPILE_DEFINITIONS INTERFACE_SOURCES) |
| get_target_property(T Threads::Threads ${flag}) |
| if(T) |
| set(PTHREAD_FLAGS "${PTHREAD_FLAGS} ${T}") |
| endif() |
| endforeach() |
| set(NAME tcmalloc) |
| configure_file(cmake/pkgconfig.pc libtcmalloc.pc @ONLY) |
| set(NAME tcmalloc_debug) |
| configure_file(cmake/pkgconfig.pc libtcmalloc_debug.pc @ONLY) |
| set(NAME tcmalloc_minimal) |
| configure_file(cmake/pkgconfig.pc libtcmalloc_minimal.pc @ONLY) |
| set(NAME tcmalloc_minimal_debug) |
| configure_file(cmake/pkgconfig.pc libtcmalloc_minimal_debug.pc @ONLY) |
| set(NAME profiler) |
| configure_file(cmake/pkgconfig.pc libprofiler.pc @ONLY) |
| install(FILES |
| ${CMAKE_CURRENT_BINARY_DIR}/libtcmalloc.pc |
| ${CMAKE_CURRENT_BINARY_DIR}/libtcmalloc_minimal.pc |
| ${CMAKE_CURRENT_BINARY_DIR}/libtcmalloc_debug.pc |
| ${CMAKE_CURRENT_BINARY_DIR}/libtcmalloc_minimal_debug.pc |
| ${CMAKE_CURRENT_BINARY_DIR}/libprofiler.pc |
| DESTINATION "${CMAKE_INSTALL_LIBDIR}/pkgconfig") |
| |
| message(WARNING "note: gperftools' cmake support is incomplete and is best-effort only") |
| |
| #TODO @GENERATE_CHANGELOG_RULES@ |
| #TODO dist |