// -*- Mode: C++; c-basic-offset: 2; indent-tabs-mode: nil -*-
/* Copyright (c) 2005-2008, Google Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 *
 *     * Redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above
 * copyright notice, this list of conditions and the following disclaimer
 * in the documentation and/or other materials provided with the
 * distribution.
 *     * Neither the name of Google Inc. nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * ---
 * Author: Markus Gutschke, Carl Crous
 */

#ifndef _ELFCORE_H
#define _ELFCORE_H
#ifdef __cplusplus
extern "C" {
#endif

/* We currently only support x86-32, x86-64, ARM, MIPS, PPC on Linux.
 * Porting to other related platforms should not be difficult.
 */
#if (defined(__i386__) || defined(__x86_64__) || defined(__arm__) || \
     defined(__mips__) || defined(__PPC__)) && defined(__linux)

#include <stdarg.h>
#include <stdint.h>
#include <sys/types.h>
#include <config.h>


/* Define the DUMPER symbol to make sure that there is exactly one
 * core dumper built into the library.
 */
#define DUMPER "ELF"

/* By the time that we get a chance to read CPU registers in the
 * calling thread, they are already in a not particularly useful
 * state. Besides, there will be multiple frames on the stack that are
 * just making the core file confusing. To fix this problem, we take a
 * snapshot of the frame pointer, stack pointer, and instruction
 * pointer at an earlier time, and then insert these values into the
 * core file.
 */

#if defined(__i386__) || defined(__x86_64__)
  typedef struct i386_regs {    /* Normal (non-FPU) CPU registers            */
  #ifdef __x86_64__
    #define BP rbp
    #define SP rsp
    #define IP rip
    uint64_t  r15,r14,r13,r12,rbp,rbx,r11,r10;
    uint64_t  r9,r8,rax,rcx,rdx,rsi,rdi,orig_rax;
    uint64_t  rip,cs,eflags;
    uint64_t  rsp,ss;
    uint64_t  fs_base, gs_base;
    uint64_t  ds,es,fs,gs;
  #else
    #define BP ebp
    #define SP esp
    #define IP eip
    uint32_t  ebx, ecx, edx, esi, edi, ebp, eax;
    uint16_t  ds, __ds, es, __es;
    uint16_t  fs, __fs, gs, __gs;
    uint32_t  orig_eax, eip;
    uint16_t  cs, __cs;
    uint32_t  eflags, esp;
    uint16_t  ss, __ss;
  #endif
  } i386_regs;
#elif defined(__arm__)
  typedef struct arm_regs {     /* General purpose registers                 */
    #define BP uregs[11]        /* Frame pointer                             */
    #define SP uregs[13]        /* Stack pointer                             */
    #define IP uregs[15]        /* Program counter                           */
    #define LR uregs[14]        /* Link register                             */
    long uregs[18];
  } arm_regs;
#elif defined(__mips__)
  typedef struct mips_regs {
    unsigned long pad[6];       /* Unused padding to match kernel structures */
    unsigned long uregs[32];    /* General purpose registers.                */
    unsigned long hi;           /* Used for multiplication and division.     */
    unsigned long lo;
    unsigned long cp0_epc;      /* Program counter.                          */
    unsigned long cp0_badvaddr;
    unsigned long cp0_status;
    unsigned long cp0_cause;
    unsigned long unused;
  } mips_regs;
#elif defined (__PPC__)
  typedef struct ppc_regs {
    #define SP uregs[1]         /* Stack pointer                             */
    #define IP rip              /* Program counter                           */
    #define LR lr               /* Link register                             */
    unsigned long uregs[32];	/* General Purpose Registers - r0-r31.       */
    double        fpr[32];	/* Floating-Point Registers - f0-f31.        */
    unsigned long rip;		/* Program counter.                          */
    unsigned long msr;
    unsigned long ccr;
    unsigned long lr;
    unsigned long ctr;
    unsigned long xeq;
    unsigned long mq;
  } ppc_regs;
#endif

#if defined(__i386__) && defined(__GNUC__)
  /* On x86 we provide an optimized version of the FRAME() macro, if the
   * compiler supports a GCC-style asm() directive. This results in somewhat
   * more accurate values for CPU registers.
   */
  typedef struct Frame {
    struct i386_regs uregs;
    int              errno_;
    pid_t            tid;
  } Frame;
  #define FRAME(f) Frame f;                                           \
                   do {                                               \
                     f.errno_ = errno;                                \
                     f.tid    = sys_gettid();                         \
                     __asm__ volatile (                               \
                       "push %%ebp\n"                                 \
                       "push %%ebx\n"                                 \
                       "mov  %%ebx,0(%%eax)\n"                        \
                       "mov  %%ecx,4(%%eax)\n"                        \
                       "mov  %%edx,8(%%eax)\n"                        \
                       "mov  %%esi,12(%%eax)\n"                       \
                       "mov  %%edi,16(%%eax)\n"                       \
                       "mov  %%ebp,20(%%eax)\n"                       \
                       "mov  %%eax,24(%%eax)\n"                       \
                       "mov  %%ds,%%ebx\n"                            \
                       "mov  %%ebx,28(%%eax)\n"                       \
                       "mov  %%es,%%ebx\n"                            \
                       "mov  %%ebx,32(%%eax)\n"                       \
                       "mov  %%fs,%%ebx\n"                            \
                       "mov  %%ebx,36(%%eax)\n"                       \
                       "mov  %%gs,%%ebx\n"                            \
                       "mov  %%ebx, 40(%%eax)\n"                      \
                       "call 0f\n"                                    \
                     "0:pop %%ebx\n"                                  \
                       "add  $1f-0b,%%ebx\n"                          \
                       "mov  %%ebx,48(%%eax)\n"                       \
                       "mov  %%cs,%%ebx\n"                            \
                       "mov  %%ebx,52(%%eax)\n"                       \
                       "pushf\n"                                      \
                       "pop  %%ebx\n"                                 \
                       "mov  %%ebx,56(%%eax)\n"                       \
                       "mov  %%esp,%%ebx\n"                           \
                       "add  $8,%%ebx\n"                              \
                       "mov  %%ebx,60(%%eax)\n"                       \
                       "mov  %%ss,%%ebx\n"                            \
                       "mov  %%ebx,64(%%eax)\n"                       \
                       "pop  %%ebx\n"                                 \
                       "pop  %%ebp\n"                                 \
                     "1:"                                             \
                       : : "a" (&f) : "memory");                      \
                     } while (0)
  #define SET_FRAME(f,r)                                              \
                     do {                                             \
                       errno = (f).errno_;                            \
                       (r)   = (f).uregs;                             \
                     } while (0)
#elif defined(__x86_64__) && defined(__GNUC__)
  /* The FRAME and SET_FRAME macros for x86_64.  */
  typedef struct Frame {
    struct i386_regs uregs;
    int              errno_;
    pid_t            tid;
  } Frame;
  #define FRAME(f) Frame f;                                           \
                   do {                                               \
                     f.errno_ = errno;                                \
                     f.tid    = sys_gettid();                         \
                     __asm__ volatile (                               \
                       "push %%rbp\n"                                 \
                       "push %%rbx\n"                                 \
                       "mov  %%r15,0(%%rax)\n"                        \
                       "mov  %%r14,8(%%rax)\n"                        \
                       "mov  %%r13,16(%%rax)\n"                       \
                       "mov  %%r12,24(%%rax)\n"                       \
                       "mov  %%rbp,32(%%rax)\n"                       \
                       "mov  %%rbx,40(%%rax)\n"                       \
                       "mov  %%r11,48(%%rax)\n"                       \
                       "mov  %%r10,56(%%rax)\n"                       \
                       "mov  %%r9,64(%%rax)\n"                        \
                       "mov  %%r8,72(%%rax)\n"                        \
                       "mov  %%rax,80(%%rax)\n"                       \
                       "mov  %%rcx,88(%%rax)\n"                       \
                       "mov  %%rdx,96(%%rax)\n"                       \
                       "mov  %%rsi,104(%%rax)\n"                      \
                       "mov  %%rdi,112(%%rax)\n"                      \
                       "mov  %%ds,%%rbx\n"                            \
                       "mov  %%rbx,184(%%rax)\n"                      \
                       "mov  %%es,%%rbx\n"                            \
                       "mov  %%rbx,192(%%rax)\n"                      \
                       "mov  %%fs,%%rbx\n"                            \
                       "mov  %%rbx,200(%%rax)\n"                      \
                       "mov  %%gs,%%rbx\n"                            \
                       "mov  %%rbx,208(%%rax)\n"                      \
                       "call 0f\n"                                    \
                     "0:pop %%rbx\n"                                  \
                       "add  $1f-0b,%%rbx\n"                          \
                       "mov  %%rbx,128(%%rax)\n"                      \
                       "mov  %%cs,%%rbx\n"                            \
                       "mov  %%rbx,136(%%rax)\n"                      \
                       "pushf\n"                                      \
                       "pop  %%rbx\n"                                 \
                       "mov  %%rbx,144(%%rax)\n"                      \
                       "mov  %%rsp,%%rbx\n"                           \
                       "add  $16,%%ebx\n"                             \
                       "mov  %%rbx,152(%%rax)\n"                      \
                       "mov  %%ss,%%rbx\n"                            \
                       "mov  %%rbx,160(%%rax)\n"                      \
                       "pop  %%rbx\n"                                 \
                       "pop  %%rbp\n"                                 \
                     "1:"                                             \
                       : : "a" (&f) : "memory");                      \
                     } while (0)
  #define SET_FRAME(f,r)                                              \
                     do {                                             \
                       errno = (f).errno_;                            \
                       (f).uregs.fs_base = (r).fs_base;               \
                       (f).uregs.gs_base = (r).gs_base;               \
                       (r)   = (f).uregs;                             \
                     } while (0)
#elif defined(__arm__) && defined(__GNUC__)
  /* ARM calling conventions are a little more tricky. A little assembly
   * helps in obtaining an accurate snapshot of all registers.
   */
  typedef struct Frame {
    struct arm_regs arm;
    int             errno_;
    pid_t           tid;
  } Frame;
  #define FRAME(f) Frame f;                                           \
                   do {                                               \
                     long cpsr;                                       \
                     f.errno_ = errno;                                \
                     f.tid    = sys_gettid();                         \
                     __asm__ volatile(                                \
                       "stmia %0, {r0-r15}\n" /* All integer regs   */\
                       : : "r"(&f.arm) : "memory");                   \
                     f.arm.uregs[16] = 0;                             \
                     __asm__ volatile(                                \
                       "mrs %0, cpsr\n"       /* Condition code reg */\
                       : "=r"(cpsr));                                 \
                     f.arm.uregs[17] = cpsr;                          \
                   } while (0)
  #define SET_FRAME(f,r)                                              \
                     do {                                             \
                       /* Don't override the FPU status register.   */\
                       /* Use the value obtained from ptrace(). This*/\
                       /* works, because our code does not perform  */\
                       /* any FPU operations, itself.               */\
                       long fps      = (f).arm.uregs[16];             \
                       errno         = (f).errno_;                    \
                       (r)           = (f).arm;                       \
                       (r).uregs[16] = fps;                           \
                     } while (0)
#elif defined(__mips__) && defined(__GNUC__)
  typedef struct Frame {
    struct mips_regs mips_regs;
    int              errno_;
    pid_t            tid;
  } Frame;
  #define MIPSREG(n) ({ register unsigned long r __asm__("$"#n); r; })
  #define FRAME(f) Frame f = { 0 };                                   \
                   do {                                               \
                     unsigned long hi, lo;                            \
                     register unsigned long pc __asm__("$31");        \
                     f.mips_regs.uregs[ 0] = MIPSREG( 0);             \
                     f.mips_regs.uregs[ 1] = MIPSREG( 1);             \
                     f.mips_regs.uregs[ 2] = MIPSREG( 2);             \
                     f.mips_regs.uregs[ 3] = MIPSREG( 3);             \
                     f.mips_regs.uregs[ 4] = MIPSREG( 4);             \
                     f.mips_regs.uregs[ 5] = MIPSREG( 5);             \
                     f.mips_regs.uregs[ 6] = MIPSREG( 6);             \
                     f.mips_regs.uregs[ 7] = MIPSREG( 7);             \
                     f.mips_regs.uregs[ 8] = MIPSREG( 8);             \
                     f.mips_regs.uregs[ 9] = MIPSREG( 9);             \
                     f.mips_regs.uregs[10] = MIPSREG(10);             \
                     f.mips_regs.uregs[11] = MIPSREG(11);             \
                     f.mips_regs.uregs[12] = MIPSREG(12);             \
                     f.mips_regs.uregs[13] = MIPSREG(13);             \
                     f.mips_regs.uregs[14] = MIPSREG(14);             \
                     f.mips_regs.uregs[15] = MIPSREG(15);             \
                     f.mips_regs.uregs[16] = MIPSREG(16);             \
                     f.mips_regs.uregs[17] = MIPSREG(17);             \
                     f.mips_regs.uregs[18] = MIPSREG(18);             \
                     f.mips_regs.uregs[19] = MIPSREG(19);             \
                     f.mips_regs.uregs[20] = MIPSREG(20);             \
                     f.mips_regs.uregs[21] = MIPSREG(21);             \
                     f.mips_regs.uregs[22] = MIPSREG(22);             \
                     f.mips_regs.uregs[23] = MIPSREG(23);             \
                     f.mips_regs.uregs[24] = MIPSREG(24);             \
                     f.mips_regs.uregs[25] = MIPSREG(25);             \
                     f.mips_regs.uregs[26] = MIPSREG(26);             \
                     f.mips_regs.uregs[27] = MIPSREG(27);             \
                     f.mips_regs.uregs[28] = MIPSREG(28);             \
                     f.mips_regs.uregs[29] = MIPSREG(29);             \
                     f.mips_regs.uregs[30] = MIPSREG(30);             \
                     f.mips_regs.uregs[31] = MIPSREG(31);             \
                     __asm__ volatile ("mfhi %0" : "=r"(hi));         \
                     __asm__ volatile ("mflo %0" : "=r"(lo));         \
                     __asm__ volatile ("jal 1f; 1:nop" : "=r"(pc));   \
                     f.mips_regs.hi       = hi;                       \
                     f.mips_regs.lo       = lo;                       \
                     f.mips_regs.cp0_epc  = pc;                       \
                     f.errno_             = errno;                    \
                     f.tid                = sys_gettid();             \
                   } while (0)
  #define SET_FRAME(f,r)                                              \
                   do {                                               \
                     errno       = (f).errno_;                        \
                     memcpy((r).uregs, (f).mips_regs.uregs,           \
                            32*sizeof(unsigned long));                \
                     (r).hi      = (f).mips_regs.hi;                  \
                     (r).lo      = (f).mips_regs.lo;                  \
                     (r).cp0_epc = (f).mips_regs.cp0_epc;             \
                   } while (0)
#else
  /* If we do not have a hand-optimized assembly version of the FRAME()
   * macro, we cannot reliably unroll the stack. So, we show a few additional
   * stack frames for the coredumper.
   */
  typedef struct Frame {
    pid_t tid;
  } Frame;
  #define FRAME(f) Frame f; do { f.tid = sys_gettid(); } while (0)
  #define SET_FRAME(f,r) do { } while (0)
#endif


/* Internal function for generating a core file. This API can change without
 * notice and is only supposed to be used internally by the core dumper.
 *
 * This function works for both single- and multi-threaded core
 * dumps. If called as
 *
 *   FRAME(frame);
 *   InternalGetCoreDump(&frame, 0, NULL, ap);
 *
 * it creates a core file that only contains information about the
 * calling thread.
 *
 * Optionally, the caller can provide information about other threads
 * by passing their process ids in "thread_pids". The process id of
 * the caller should not be included in this array. All of the threads
 * must have been attached to with ptrace(), prior to calling this
 * function. They will be detached when "InternalGetCoreDump()" returns.
 *
 * This function either returns a file handle that can be read for obtaining
 * a core dump, or "-1" in case of an error. In the latter case, "errno"
 * will be set appropriately.
 *
 * While "InternalGetCoreDump()" is not technically async signal safe, you
 * might be tempted to invoke it from a signal handler. The code goes to
 * great lengths to make a best effort that this will actually work. But in
 * any case, you must make sure that you preserve the value of "errno"
 * yourself. It is guaranteed to be clobbered otherwise.
 *
 * Also, "InternalGetCoreDump" is not strictly speaking re-entrant. Again,
 * it makes a best effort to behave reasonably when called in a multi-
 * threaded environment, but it is ultimately the caller's responsibility
 * to provide locking.
 */
int InternalGetCoreDump(void *frame, int num_threads, pid_t *thread_pids,
                        va_list ap
                     /* const struct CoreDumpParameters *params,
                        const char *file_name,
                        const char *PATH
                      */);

#endif

#ifdef __cplusplus
}
#endif
#endif /* _ELFCORE_H */