blob: 9f2e8a4b583ec2ab4b8bf1553c6f75e71e947ded [file] [log] [blame]
; RUN: opt -passes='loop(unswitch<nontrivial>),verify<loops>' -S < %s | FileCheck %s
; RUN: opt -simple-loop-unswitch -enable-nontrivial-unswitch -S < %s | FileCheck %s
; RUN: opt -simple-loop-unswitch -enable-nontrivial-unswitch -enable-mssa-loop-dependency=true -verify-memoryssa -S < %s | FileCheck %s
declare i32 @a()
declare i32 @b()
declare i32 @c()
declare i32 @d()
declare void @sink1(i32)
declare void @sink2(i32)
declare i1 @cond()
declare i32 @cond.i32()
; Negative test: we cannot unswitch convergent calls.
define void @test_no_unswitch_convergent(i1* %ptr, i1 %cond) {
; CHECK-LABEL: @test_no_unswitch_convergent(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %loop_begin
;
; We shouldn't have unswitched into any other block either.
; CHECK-NOT: br i1 %cond
loop_begin:
br i1 %cond, label %loop_a, label %loop_b
; CHECK: loop_begin:
; CHECK-NEXT: br i1 %cond, label %loop_a, label %loop_b
loop_a:
call i32 @a() convergent
br label %loop_latch
loop_b:
call i32 @b()
br label %loop_latch
loop_latch:
%v = load i1, i1* %ptr
br i1 %v, label %loop_begin, label %loop_exit
loop_exit:
ret void
}
; Negative test: we cannot unswitch noduplicate calls.
define void @test_no_unswitch_noduplicate(i1* %ptr, i1 %cond) {
; CHECK-LABEL: @test_no_unswitch_noduplicate(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %loop_begin
;
; We shouldn't have unswitched into any other block either.
; CHECK-NOT: br i1 %cond
loop_begin:
br i1 %cond, label %loop_a, label %loop_b
; CHECK: loop_begin:
; CHECK-NEXT: br i1 %cond, label %loop_a, label %loop_b
loop_a:
call i32 @a() noduplicate
br label %loop_latch
loop_b:
call i32 @b()
br label %loop_latch
loop_latch:
%v = load i1, i1* %ptr
br i1 %v, label %loop_begin, label %loop_exit
loop_exit:
ret void
}
declare i32 @__CxxFrameHandler3(...)
; Negative test: we cannot unswitch when tokens are used across blocks as we
; might introduce PHIs.
define void @test_no_unswitch_cross_block_token(i1* %ptr, i1 %cond) nounwind personality i32 (...)* @__CxxFrameHandler3 {
; CHECK-LABEL: @test_no_unswitch_cross_block_token(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %loop_begin
;
; We shouldn't have unswitched into any other block either.
; CHECK-NOT: br i1 %cond
loop_begin:
br i1 %cond, label %loop_a, label %loop_b
; CHECK: loop_begin:
; CHECK-NEXT: br i1 %cond, label %loop_a, label %loop_b
loop_a:
call i32 @a()
br label %loop_cont
loop_b:
call i32 @b()
br label %loop_cont
loop_cont:
invoke i32 @a()
to label %loop_latch unwind label %loop_catch
loop_latch:
br label %loop_begin
loop_catch:
%catch = catchswitch within none [label %loop_catch_latch, label %loop_exit] unwind to caller
loop_catch_latch:
%catchpad_latch = catchpad within %catch []
catchret from %catchpad_latch to label %loop_begin
loop_exit:
%catchpad_exit = catchpad within %catch []
catchret from %catchpad_exit to label %exit
exit:
ret void
}
; Non-trivial loop unswitching where there are two distinct trivial conditions
; to unswitch within the loop.
define i32 @test1(i1* %ptr, i1 %cond1, i1 %cond2) {
; CHECK-LABEL: @test1(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond1, label %entry.split.us, label %entry.split
loop_begin:
br i1 %cond1, label %loop_a, label %loop_b
loop_a:
call i32 @a()
br label %latch
; The 'loop_a' unswitched loop.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: br label %loop_a.us
;
; CHECK: loop_a.us:
; CHECK-NEXT: call i32 @a()
; CHECK-NEXT: br label %latch.us
;
; CHECK: latch.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin.us, label %loop_exit.split.us
;
; CHECK: loop_exit.split.us:
; CHECK-NEXT: br label %loop_exit
loop_b:
br i1 %cond2, label %loop_b_a, label %loop_b_b
; The second unswitched condition.
;
; CHECK: entry.split:
; CHECK-NEXT: br i1 %cond2, label %entry.split.split.us, label %entry.split.split
loop_b_a:
call i32 @b()
br label %latch
; The 'loop_b_a' unswitched loop.
;
; CHECK: entry.split.split.us:
; CHECK-NEXT: br label %loop_begin.us1
;
; CHECK: loop_begin.us1:
; CHECK-NEXT: br label %loop_b.us
;
; CHECK: loop_b.us:
; CHECK-NEXT: br label %loop_b_a.us
;
; CHECK: loop_b_a.us:
; CHECK-NEXT: call i32 @b()
; CHECK-NEXT: br label %latch.us2
;
; CHECK: latch.us2:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin.us1, label %loop_exit.split.split.us
;
; CHECK: loop_exit.split.split.us:
; CHECK-NEXT: br label %loop_exit.split
loop_b_b:
call i32 @c()
br label %latch
; The 'loop_b_b' unswitched loop.
;
; CHECK: entry.split.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: br label %loop_b
;
; CHECK: loop_b:
; CHECK-NEXT: br label %loop_b_b
;
; CHECK: loop_b_b:
; CHECK-NEXT: call i32 @c()
; CHECK-NEXT: br label %latch
;
; CHECK: latch:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin, label %loop_exit.split.split
;
; CHECK: loop_exit.split.split:
; CHECK-NEXT: br label %loop_exit.split
latch:
%v = load i1, i1* %ptr
br i1 %v, label %loop_begin, label %loop_exit
loop_exit:
ret i32 0
; CHECK: loop_exit.split:
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit:
; CHECK-NEXT: ret
}
define i32 @test2(i1* %ptr, i1 %cond1, i32* %a.ptr, i32* %b.ptr, i32* %c.ptr) {
; CHECK-LABEL: @test2(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond1, label %entry.split.us, label %entry.split
loop_begin:
%v = load i1, i1* %ptr
br i1 %cond1, label %loop_a, label %loop_b
loop_a:
%a = load i32, i32* %a.ptr
%ac = load i32, i32* %c.ptr
br i1 %v, label %loop_begin, label %loop_exit
; The 'loop_a' unswitched loop.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br label %loop_a.us
;
; CHECK: loop_a.us:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: %[[AC:.*]] = load i32, i32* %c.ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin.backedge.us, label %loop_exit.split.us
;
; CHECK: loop_exit.split.us:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A]], %loop_a.us ]
; CHECK-NEXT: %[[AC_LCSSA:.*]] = phi i32 [ %[[AC]], %loop_a.us ]
; CHECK-NEXT: br label %loop_exit
loop_b:
%b = load i32, i32* %b.ptr
%bc = load i32, i32* %c.ptr
br i1 %v, label %loop_begin, label %loop_exit
; The 'loop_b' unswitched loop.
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br label %loop_b
;
; CHECK: loop_b:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: %[[BC:.*]] = load i32, i32* %c.ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin.backedge, label %loop_exit.split
;
; CHECK: loop_exit.split:
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B]], %loop_b ]
; CHECK-NEXT: %[[BC_LCSSA:.*]] = phi i32 [ %[[BC]], %loop_b ]
; CHECK-NEXT: br label %loop_exit
loop_exit:
%ab.phi = phi i32 [ %a, %loop_a ], [ %b, %loop_b ]
%c.phi = phi i32 [ %ac, %loop_a ], [ %bc, %loop_b ]
%result = add i32 %ab.phi, %c.phi
ret i32 %result
; CHECK: loop_exit:
; CHECK-NEXT: %[[AB_PHI:.*]] = phi i32 [ %[[B_LCSSA]], %loop_exit.split ], [ %[[A_LCSSA]], %loop_exit.split.us ]
; CHECK-NEXT: %[[C_PHI:.*]] = phi i32 [ %[[BC_LCSSA]], %loop_exit.split ], [ %[[AC_LCSSA]], %loop_exit.split.us ]
; CHECK-NEXT: %[[RESULT:.*]] = add i32 %[[AB_PHI]], %[[C_PHI]]
; CHECK-NEXT: ret i32 %[[RESULT]]
}
; Test a non-trivial unswitch of an exiting edge to an exit block with other
; in-loop predecessors.
define i32 @test3a(i1* %ptr, i1 %cond1, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test3a(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond1, label %entry.split.us, label %entry.split
loop_begin:
%v = load i1, i1* %ptr
%a = load i32, i32* %a.ptr
br i1 %cond1, label %loop_exit, label %loop_b
; The 'loop_exit' clone.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %loop_exit.split.us
;
; CHECK: loop_exit.split.us:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A]], %loop_begin.us ]
; CHECK-NEXT: br label %loop_exit
loop_b:
%b = load i32, i32* %b.ptr
br i1 %v, label %loop_begin, label %loop_exit
; The 'loop_b' unswitched loop.
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %loop_b
;
; CHECK: loop_b:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin, label %loop_exit.split
;
; CHECK: loop_exit.split:
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B]], %loop_b ]
; CHECK-NEXT: br label %loop_exit
loop_exit:
%ab.phi = phi i32 [ %a, %loop_begin ], [ %b, %loop_b ]
ret i32 %ab.phi
; CHECK: loop_exit:
; CHECK-NEXT: %[[AB_PHI:.*]] = phi i32 [ %[[B_LCSSA]], %loop_exit.split ], [ %[[A_LCSSA]], %loop_exit.split.us ]
; CHECK-NEXT: ret i32 %[[AB_PHI]]
}
; Test a non-trivial unswitch of an exiting edge to an exit block with other
; in-loop predecessors. This is the same as @test3a but with the reversed order
; of successors so that the exiting edge is *not* the cloned edge.
define i32 @test3b(i1* %ptr, i1 %cond1, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test3b(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond1, label %entry.split.us, label %entry.split
loop_begin:
%v = load i1, i1* %ptr
%a = load i32, i32* %a.ptr
br i1 %cond1, label %loop_b, label %loop_exit
; The 'loop_b' unswitched loop.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %loop_b.us
;
; CHECK: loop_b.us:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin.us, label %loop_exit.split.us
;
; CHECK: loop_exit.split.us:
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B]], %loop_b.us ]
; CHECK-NEXT: br label %loop_exit
loop_b:
%b = load i32, i32* %b.ptr
br i1 %v, label %loop_begin, label %loop_exit
; The original loop, now non-looping due to unswitching..
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %loop_exit.split
;
; CHECK: loop_exit.split:
; CHECK-NEXT: br label %loop_exit
loop_exit:
%ab.phi = phi i32 [ %b, %loop_b ], [ %a, %loop_begin ]
ret i32 %ab.phi
; CHECK: loop_exit:
; CHECK-NEXT: %[[AB_PHI:.*]] = phi i32 [ %[[A]], %loop_exit.split ], [ %[[B_LCSSA]], %loop_exit.split.us ]
; CHECK-NEXT: ret i32 %[[AB_PHI]]
}
; Test a non-trivial unswitch of an exiting edge to an exit block with no other
; in-loop predecessors.
define void @test4a(i1* %ptr, i1 %cond1, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test4a(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond1, label %entry.split.us, label %entry.split
loop_begin:
%v = load i1, i1* %ptr
%a = load i32, i32* %a.ptr
br i1 %cond1, label %loop_exit1, label %loop_b
; The 'loop_exit' clone.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %loop_exit1.split.us
;
; CHECK: loop_exit1.split.us:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A]], %loop_begin.us ]
; CHECK-NEXT: br label %loop_exit1
loop_b:
%b = load i32, i32* %b.ptr
br i1 %v, label %loop_begin, label %loop_exit2
; The 'loop_b' unswitched loop.
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %loop_b
;
; CHECK: loop_b:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin, label %loop_exit2
loop_exit1:
%a.phi = phi i32 [ %a, %loop_begin ]
call void @sink1(i32 %a.phi)
ret void
; CHECK: loop_exit1:
; CHECK-NEXT: call void @sink1(i32 %[[A_LCSSA]])
; CHECK-NEXT: ret void
loop_exit2:
%b.phi = phi i32 [ %b, %loop_b ]
call void @sink2(i32 %b.phi)
ret void
; CHECK: loop_exit2:
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B]], %loop_b ]
; CHECK-NEXT: call void @sink2(i32 %[[B_LCSSA]])
; CHECK-NEXT: ret void
}
; Test a non-trivial unswitch of an exiting edge to an exit block with no other
; in-loop predecessors. This is the same as @test4a but with the edges reversed
; so that the exiting edge is *not* the cloned edge.
define void @test4b(i1* %ptr, i1 %cond1, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test4b(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond1, label %entry.split.us, label %entry.split
loop_begin:
%v = load i1, i1* %ptr
%a = load i32, i32* %a.ptr
br i1 %cond1, label %loop_b, label %loop_exit1
; The 'loop_b' clone.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %loop_b.us
;
; CHECK: loop_b.us:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin.us, label %loop_exit2.split.us
;
; CHECK: loop_exit2.split.us:
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B]], %loop_b.us ]
; CHECK-NEXT: br label %loop_exit2
loop_b:
%b = load i32, i32* %b.ptr
br i1 %v, label %loop_begin, label %loop_exit2
; The 'loop_exit' unswitched path.
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %loop_exit1
loop_exit1:
%a.phi = phi i32 [ %a, %loop_begin ]
call void @sink1(i32 %a.phi)
ret void
; CHECK: loop_exit1:
; CHECK-NEXT: %[[A_PHI:.*]] = phi i32 [ %[[A]], %loop_begin ]
; CHECK-NEXT: call void @sink1(i32 %[[A_PHI]])
; CHECK-NEXT: ret void
loop_exit2:
%b.phi = phi i32 [ %b, %loop_b ]
call void @sink2(i32 %b.phi)
ret void
; CHECK: loop_exit2:
; CHECK-NEXT: call void @sink2(i32 %[[B_LCSSA]])
; CHECK-NEXT: ret void
}
; Test a non-trivial unswitch of an exiting edge to an exit block with no other
; in-loop predecessors. This is the same as @test4a but with a common merge
; block after the independent loop exits. This requires a different structural
; update to the dominator tree.
define void @test4c(i1* %ptr, i1 %cond1, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test4c(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond1, label %entry.split.us, label %entry.split
loop_begin:
%v = load i1, i1* %ptr
%a = load i32, i32* %a.ptr
br i1 %cond1, label %loop_exit1, label %loop_b
; The 'loop_exit' clone.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %loop_exit1.split.us
;
; CHECK: loop_exit1.split.us:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A]], %loop_begin.us ]
; CHECK-NEXT: br label %loop_exit1
loop_b:
%b = load i32, i32* %b.ptr
br i1 %v, label %loop_begin, label %loop_exit2
; The 'loop_b' unswitched loop.
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %loop_b
;
; CHECK: loop_b:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin, label %loop_exit2
loop_exit1:
%a.phi = phi i32 [ %a, %loop_begin ]
call void @sink1(i32 %a.phi)
br label %exit
; CHECK: loop_exit1:
; CHECK-NEXT: call void @sink1(i32 %[[A_LCSSA]])
; CHECK-NEXT: br label %exit
loop_exit2:
%b.phi = phi i32 [ %b, %loop_b ]
call void @sink2(i32 %b.phi)
br label %exit
; CHECK: loop_exit2:
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B]], %loop_b ]
; CHECK-NEXT: call void @sink2(i32 %[[B_LCSSA]])
; CHECK-NEXT: br label %exit
exit:
ret void
; CHECK: exit:
; CHECK-NEXT: ret void
}
; Test that we can unswitch a condition out of multiple layers of a loop nest.
define i32 @test5(i1* %ptr, i1 %cond1, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test5(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond1, label %loop_begin.split.us, label %entry.split
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: br label %loop_begin.split
loop_begin:
br label %inner_loop_begin
inner_loop_begin:
%v = load i1, i1* %ptr
%a = load i32, i32* %a.ptr
br i1 %cond1, label %loop_exit, label %inner_loop_b
; The 'loop_exit' clone.
;
; CHECK: loop_begin.split.us:
; CHECK-NEXT: br label %inner_loop_begin.us
;
; CHECK: inner_loop_begin.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %loop_exit.loopexit.split.us
;
; CHECK: loop_exit.loopexit.split.us:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A]], %inner_loop_begin.us ]
; CHECK-NEXT: br label %loop_exit
inner_loop_b:
%b = load i32, i32* %b.ptr
br i1 %v, label %inner_loop_begin, label %loop_latch
; The 'inner_loop_b' unswitched loop.
;
; CHECK: loop_begin.split:
; CHECK-NEXT: br label %inner_loop_begin
;
; CHECK: inner_loop_begin:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_loop_b
;
; CHECK: inner_loop_b:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_begin, label %loop_latch
loop_latch:
%b.phi = phi i32 [ %b, %inner_loop_b ]
%v2 = load i1, i1* %ptr
br i1 %v2, label %loop_begin, label %loop_exit
; CHECK: loop_latch:
; CHECK-NEXT: %[[B_INNER_LCSSA:.*]] = phi i32 [ %[[B]], %inner_loop_b ]
; CHECK-NEXT: %[[V2:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V2]], label %loop_begin, label %loop_exit.loopexit1
loop_exit:
%ab.phi = phi i32 [ %a, %inner_loop_begin ], [ %b.phi, %loop_latch ]
ret i32 %ab.phi
; CHECK: loop_exit.loopexit:
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit.loopexit1:
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B_INNER_LCSSA]], %loop_latch ]
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit:
; CHECK-NEXT: %[[AB_PHI:.*]] = phi i32 [ %[[A_LCSSA]], %loop_exit.loopexit ], [ %[[B_LCSSA]], %loop_exit.loopexit1 ]
; CHECK-NEXT: ret i32 %[[AB_PHI]]
}
; Test that we can unswitch a condition where we end up only cloning some of
; the nested loops and needing to delete some of the nested loops.
define i32 @test6(i1* %ptr, i1 %cond1, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test6(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond1, label %entry.split.us, label %entry.split
loop_begin:
%v = load i1, i1* %ptr
br i1 %cond1, label %loop_a, label %loop_b
loop_a:
br label %loop_a_inner
loop_a_inner:
%va = load i1, i1* %ptr
%a = load i32, i32* %a.ptr
br i1 %va, label %loop_a_inner, label %loop_a_inner_exit
loop_a_inner_exit:
%a.lcssa = phi i32 [ %a, %loop_a_inner ]
br label %latch
; The 'loop_a' cloned loop.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br label %loop_a.us
;
; CHECK: loop_a.us:
; CHECK-NEXT: br label %loop_a_inner.us
;
; CHECK: loop_a_inner.us
; CHECK-NEXT: %[[VA:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br i1 %[[VA]], label %loop_a_inner.us, label %loop_a_inner_exit.us
;
; CHECK: loop_a_inner_exit.us:
; CHECK-NEXT: %[[A_INNER_LCSSA:.*]] = phi i32 [ %[[A]], %loop_a_inner.us ]
; CHECK-NEXT: br label %latch.us
;
; CHECK: latch.us:
; CHECK-NEXT: %[[A_PHI:.*]] = phi i32 [ %[[A_INNER_LCSSA]], %loop_a_inner_exit.us ]
; CHECK-NEXT: br i1 %[[V]], label %loop_begin.us, label %loop_exit.split.us
;
; CHECK: loop_exit.split.us:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A_PHI]], %latch.us ]
; CHECK-NEXT: br label %loop_exit
loop_b:
br label %loop_b_inner
loop_b_inner:
%vb = load i1, i1* %ptr
%b = load i32, i32* %b.ptr
br i1 %vb, label %loop_b_inner, label %loop_b_inner_exit
loop_b_inner_exit:
%b.lcssa = phi i32 [ %b, %loop_b_inner ]
br label %latch
latch:
%ab.phi = phi i32 [ %a.lcssa, %loop_a_inner_exit ], [ %b.lcssa, %loop_b_inner_exit ]
br i1 %v, label %loop_begin, label %loop_exit
; The 'loop_b' unswitched loop.
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br label %loop_b
;
; CHECK: loop_b:
; CHECK-NEXT: br label %loop_b_inner
;
; CHECK: loop_b_inner
; CHECK-NEXT: %[[VB:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br i1 %[[VB]], label %loop_b_inner, label %loop_b_inner_exit
;
; CHECK: loop_b_inner_exit:
; CHECK-NEXT: %[[B_INNER_LCSSA:.*]] = phi i32 [ %[[B]], %loop_b_inner ]
; CHECK-NEXT: br label %latch
;
; CHECK: latch:
; CHECK-NEXT: br i1 %[[V]], label %loop_begin, label %loop_exit.split
;
; CHECK: loop_exit.split:
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B_INNER_LCSSA]], %latch ]
; CHECK-NEXT: br label %loop_exit
loop_exit:
%ab.lcssa = phi i32 [ %ab.phi, %latch ]
ret i32 %ab.lcssa
; CHECK: loop_exit:
; CHECK-NEXT: %[[AB_PHI:.*]] = phi i32 [ %[[B_LCSSA]], %loop_exit.split ], [ %[[A_LCSSA]], %loop_exit.split.us ]
; CHECK-NEXT: ret i32 %[[AB_PHI]]
}
; Test that when unswitching a deeply nested loop condition in a way that
; produces a non-loop clone that can reach multiple exit blocks which are part
; of different outer loops we correctly divide the cloned loop blocks between
; the outer loops based on reachability.
define i32 @test7a(i1* %ptr, i1* %cond.ptr, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test7a(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %loop_begin
loop_begin:
%a = load i32, i32* %a.ptr
br label %inner_loop_begin
; CHECK: loop_begin:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_loop_begin
inner_loop_begin:
%a.phi = phi i32 [ %a, %loop_begin ], [ %a2, %inner_inner_loop_exit ]
%cond = load i1, i1* %cond.ptr
%b = load i32, i32* %b.ptr
br label %inner_inner_loop_begin
; CHECK: inner_loop_begin:
; CHECK-NEXT: %[[A_INNER_PHI:.*]] = phi i32 [ %[[A]], %loop_begin ], [ %[[A2:.*]], %inner_inner_loop_exit ]
; CHECK-NEXT: %[[COND:.*]] = load i1, i1* %cond.ptr
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br i1 %[[COND]], label %inner_loop_begin.split.us, label %inner_loop_begin.split
inner_inner_loop_begin:
%v1 = load i1, i1* %ptr
br i1 %v1, label %inner_inner_loop_a, label %inner_inner_loop_b
inner_inner_loop_a:
%v2 = load i1, i1* %ptr
br i1 %v2, label %loop_exit, label %inner_inner_loop_c
inner_inner_loop_b:
%v3 = load i1, i1* %ptr
br i1 %v3, label %inner_inner_loop_exit, label %inner_inner_loop_c
inner_inner_loop_c:
%v4 = load i1, i1* %ptr
br i1 %v4, label %inner_loop_exit, label %inner_inner_loop_d
inner_inner_loop_d:
br i1 %cond, label %inner_loop_exit, label %inner_inner_loop_begin
; The cloned copy that always exits with the adjustments required to fix up
; loop exits.
;
; CHECK: inner_loop_begin.split.us:
; CHECK-NEXT: br label %inner_inner_loop_begin.us
;
; CHECK: inner_inner_loop_begin.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_a.us, label %inner_inner_loop_b.us
;
; CHECK: inner_inner_loop_b.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_exit.split.us, label %inner_inner_loop_c.us.loopexit
;
; CHECK: inner_inner_loop_a.us:
; CHECK-NEXT: %[[A_NEW_LCSSA:.*]] = phi i32 [ %[[A_INNER_PHI]], %inner_inner_loop_begin.us ]
; CHECK-NEXT: %[[B_NEW_LCSSA:.*]] = phi i32 [ %[[B]], %inner_inner_loop_begin.us ]
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_exit.split.us, label %inner_inner_loop_c.us
;
; CHECK: inner_inner_loop_c.us.loopexit:
; CHECK-NEXT: br label %inner_inner_loop_c.us
;
; CHECK: inner_inner_loop_c.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_exit.loopexit.split.us, label %inner_inner_loop_d.us
;
; CHECK: inner_inner_loop_d.us:
; CHECK-NEXT: br label %inner_loop_exit.loopexit.split
;
; CHECK: inner_inner_loop_exit.split.us:
; CHECK-NEXT: br label %inner_inner_loop_exit
;
; CHECK: loop_exit.split.us:
; CHECK-NEXT: %[[A_LCSSA_US:.*]] = phi i32 [ %[[A_NEW_LCSSA]], %inner_inner_loop_a.us ]
; CHECK-NEXT: %[[B_LCSSA_US:.*]] = phi i32 [ %[[B_NEW_LCSSA]], %inner_inner_loop_a.us ]
; CHECK-NEXT: br label %loop_exit
;
; CHECK: inner_loop_exit.loopexit.split.us:
; CHECK-NEXT: br label %inner_loop_exit.loopexit
;
; The original copy that continues to loop.
;
; CHECK: inner_loop_begin.split:
; CHECK-NEXT: br label %inner_inner_loop_begin
;
; CHECK: inner_inner_loop_begin:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_a, label %inner_inner_loop_b
;
; CHECK: inner_inner_loop_a:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_exit.split, label %inner_inner_loop_c
;
; CHECK: inner_inner_loop_b:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_exit.split, label %inner_inner_loop_c
;
; CHECK: inner_inner_loop_c:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_exit.loopexit.split, label %inner_inner_loop_d
;
; CHECK: inner_inner_loop_d:
; CHECK-NEXT: br label %inner_inner_loop_begin
;
; CHECK: inner_inner_loop_exit.split:
; CHECK-NEXT: br label %inner_inner_loop_exit
inner_inner_loop_exit:
%a2 = load i32, i32* %a.ptr
%v5 = load i1, i1* %ptr
br i1 %v5, label %inner_loop_exit, label %inner_loop_begin
; CHECK: inner_inner_loop_exit:
; CHECK-NEXT: %[[A2]] = load i32, i32* %a.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_exit.loopexit1, label %inner_loop_begin
inner_loop_exit:
br label %loop_begin
; CHECK: inner_loop_exit.loopexit.split:
; CHECK-NEXT: br label %inner_loop_exit.loopexit
;
; CHECK: inner_loop_exit.loopexit:
; CHECK-NEXT: br label %inner_loop_exit
;
; CHECK: inner_loop_exit.loopexit1:
; CHECK-NEXT: br label %inner_loop_exit
;
; CHECK: inner_loop_exit:
; CHECK-NEXT: br label %loop_begin
loop_exit:
%a.lcssa = phi i32 [ %a.phi, %inner_inner_loop_a ]
%b.lcssa = phi i32 [ %b, %inner_inner_loop_a ]
%result = add i32 %a.lcssa, %b.lcssa
ret i32 %result
; CHECK: loop_exit.split:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A_INNER_PHI]], %inner_inner_loop_a ]
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B]], %inner_inner_loop_a ]
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit:
; CHECK-NEXT: %[[A_PHI:.*]] = phi i32 [ %[[A_LCSSA]], %loop_exit.split ], [ %[[A_LCSSA_US]], %loop_exit.split.us ]
; CHECK-NEXT: %[[B_PHI:.*]] = phi i32 [ %[[B_LCSSA]], %loop_exit.split ], [ %[[B_LCSSA_US]], %loop_exit.split.us ]
; CHECK-NEXT: %[[RESULT:.*]] = add i32 %[[A_PHI]], %[[B_PHI]]
; CHECK-NEXT: ret i32 %[[RESULT]]
}
; Same pattern as @test7a but here the original loop becomes a non-loop that
; can reach multiple exit blocks which are part of different outer loops.
define i32 @test7b(i1* %ptr, i1* %cond.ptr, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test7b(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %loop_begin
loop_begin:
%a = load i32, i32* %a.ptr
br label %inner_loop_begin
; CHECK: loop_begin:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_loop_begin
inner_loop_begin:
%a.phi = phi i32 [ %a, %loop_begin ], [ %a2, %inner_inner_loop_exit ]
%cond = load i1, i1* %cond.ptr
%b = load i32, i32* %b.ptr
br label %inner_inner_loop_begin
; CHECK: inner_loop_begin:
; CHECK-NEXT: %[[A_INNER_PHI:.*]] = phi i32 [ %[[A]], %loop_begin ], [ %[[A2:.*]], %inner_inner_loop_exit ]
; CHECK-NEXT: %[[COND:.*]] = load i1, i1* %cond.ptr
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br i1 %[[COND]], label %inner_loop_begin.split.us, label %inner_loop_begin.split
inner_inner_loop_begin:
%v1 = load i1, i1* %ptr
br i1 %v1, label %inner_inner_loop_a, label %inner_inner_loop_b
inner_inner_loop_a:
%v2 = load i1, i1* %ptr
br i1 %v2, label %loop_exit, label %inner_inner_loop_c
inner_inner_loop_b:
%v3 = load i1, i1* %ptr
br i1 %v3, label %inner_inner_loop_exit, label %inner_inner_loop_c
inner_inner_loop_c:
%v4 = load i1, i1* %ptr
br i1 %v4, label %inner_loop_exit, label %inner_inner_loop_d
inner_inner_loop_d:
br i1 %cond, label %inner_inner_loop_begin, label %inner_loop_exit
; The cloned copy that continues looping.
;
; CHECK: inner_loop_begin.split.us:
; CHECK-NEXT: br label %inner_inner_loop_begin.us
;
; CHECK: inner_inner_loop_begin.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_a.us, label %inner_inner_loop_b.us
;
; CHECK: inner_inner_loop_b.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_exit.split.us, label %inner_inner_loop_c.us
;
; CHECK: inner_inner_loop_a.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_exit.split.us, label %inner_inner_loop_c.us
;
; CHECK: inner_inner_loop_c.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_exit.loopexit.split.us, label %inner_inner_loop_d.us
;
; CHECK: inner_inner_loop_d.us:
; CHECK-NEXT: br label %inner_inner_loop_begin.us
;
; CHECK: inner_inner_loop_exit.split.us:
; CHECK-NEXT: br label %inner_inner_loop_exit
;
; CHECK: loop_exit.split.us:
; CHECK-NEXT: %[[A_LCSSA_US:.*]] = phi i32 [ %[[A_INNER_PHI]], %inner_inner_loop_a.us ]
; CHECK-NEXT: %[[B_LCSSA_US:.*]] = phi i32 [ %[[B]], %inner_inner_loop_a.us ]
; CHECK-NEXT: br label %loop_exit
;
; CHECK: inner_loop_exit.loopexit.split.us:
; CHECK-NEXT: br label %inner_loop_exit.loopexit
;
; The original copy that now always exits and needs adjustments for exit
; blocks.
;
; CHECK: inner_loop_begin.split:
; CHECK-NEXT: br label %inner_inner_loop_begin
;
; CHECK: inner_inner_loop_begin:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_a, label %inner_inner_loop_b
;
; CHECK: inner_inner_loop_a:
; CHECK-NEXT: %[[A_NEW_LCSSA:.*]] = phi i32 [ %[[A_INNER_PHI]], %inner_inner_loop_begin ]
; CHECK-NEXT: %[[B_NEW_LCSSA:.*]] = phi i32 [ %[[B]], %inner_inner_loop_begin ]
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_exit.split, label %inner_inner_loop_c
;
; CHECK: inner_inner_loop_b:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_exit.split, label %inner_inner_loop_c.loopexit
;
; CHECK: inner_inner_loop_c.loopexit:
; CHECK-NEXT: br label %inner_inner_loop_c
;
; CHECK: inner_inner_loop_c:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_exit.loopexit.split, label %inner_inner_loop_d
;
; CHECK: inner_inner_loop_d:
; CHECK-NEXT: br label %inner_loop_exit.loopexit.split
;
; CHECK: inner_inner_loop_exit.split:
; CHECK-NEXT: br label %inner_inner_loop_exit
inner_inner_loop_exit:
%a2 = load i32, i32* %a.ptr
%v5 = load i1, i1* %ptr
br i1 %v5, label %inner_loop_exit, label %inner_loop_begin
; CHECK: inner_inner_loop_exit:
; CHECK-NEXT: %[[A2]] = load i32, i32* %a.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_exit.loopexit1, label %inner_loop_begin
inner_loop_exit:
br label %loop_begin
; CHECK: inner_loop_exit.loopexit.split:
; CHECK-NEXT: br label %inner_loop_exit.loopexit
;
; CHECK: inner_loop_exit.loopexit:
; CHECK-NEXT: br label %inner_loop_exit
;
; CHECK: inner_loop_exit.loopexit1:
; CHECK-NEXT: br label %inner_loop_exit
;
; CHECK: inner_loop_exit:
; CHECK-NEXT: br label %loop_begin
loop_exit:
%a.lcssa = phi i32 [ %a.phi, %inner_inner_loop_a ]
%b.lcssa = phi i32 [ %b, %inner_inner_loop_a ]
%result = add i32 %a.lcssa, %b.lcssa
ret i32 %result
; CHECK: loop_exit.split:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A_NEW_LCSSA]], %inner_inner_loop_a ]
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B_NEW_LCSSA]], %inner_inner_loop_a ]
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit:
; CHECK-NEXT: %[[A_PHI:.*]] = phi i32 [ %[[A_LCSSA]], %loop_exit.split ], [ %[[A_LCSSA_US]], %loop_exit.split.us ]
; CHECK-NEXT: %[[B_PHI:.*]] = phi i32 [ %[[B_LCSSA]], %loop_exit.split ], [ %[[B_LCSSA_US]], %loop_exit.split.us ]
; CHECK-NEXT: %[[RESULT:.*]] = add i32 %[[A_PHI]], %[[B_PHI]]
; CHECK-NEXT: ret i32 %[[RESULT]]
}
; Test that when the exit block set of an inner loop changes to start at a less
; high level of the loop nest we correctly hoist the loop up the nest.
define i32 @test8a(i1* %ptr, i1* %cond.ptr, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test8a(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %loop_begin
loop_begin:
%a = load i32, i32* %a.ptr
br label %inner_loop_begin
; CHECK: loop_begin:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_loop_begin
inner_loop_begin:
%a.phi = phi i32 [ %a, %loop_begin ], [ %a2, %inner_inner_loop_exit ]
%cond = load i1, i1* %cond.ptr
%b = load i32, i32* %b.ptr
br label %inner_inner_loop_begin
; CHECK: inner_loop_begin:
; CHECK-NEXT: %[[A_INNER_PHI:.*]] = phi i32 [ %[[A]], %loop_begin ], [ %[[A2:.*]], %inner_inner_loop_exit ]
; CHECK-NEXT: %[[COND:.*]] = load i1, i1* %cond.ptr
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br i1 %[[COND]], label %inner_loop_begin.split.us, label %inner_loop_begin.split
inner_inner_loop_begin:
%v1 = load i1, i1* %ptr
br i1 %v1, label %inner_inner_loop_a, label %inner_inner_loop_b
inner_inner_loop_a:
%v2 = load i1, i1* %ptr
br i1 %v2, label %inner_inner_loop_latch, label %inner_loop_exit
inner_inner_loop_b:
br i1 %cond, label %inner_inner_loop_latch, label %inner_inner_loop_exit
inner_inner_loop_latch:
br label %inner_inner_loop_begin
; The cloned region is now an exit from the inner loop.
;
; CHECK: inner_loop_begin.split.us:
; CHECK-NEXT: %[[A_INNER_INNER_LCSSA:.*]] = phi i32 [ %[[A_INNER_PHI]], %inner_loop_begin ]
; CHECK-NEXT: br label %inner_inner_loop_begin.us
;
; CHECK: inner_inner_loop_begin.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_a.us, label %inner_inner_loop_b.us
;
; CHECK: inner_inner_loop_b.us:
; CHECK-NEXT: br label %inner_inner_loop_latch.us
;
; CHECK: inner_inner_loop_a.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_latch.us, label %inner_loop_exit.loopexit.split.us
;
; CHECK: inner_inner_loop_latch.us:
; CHECK-NEXT: br label %inner_inner_loop_begin.us
;
; CHECK: inner_loop_exit.loopexit.split.us:
; CHECK-NEXT: %[[A_INNER_LCSSA_US:.*]] = phi i32 [ %[[A_INNER_INNER_LCSSA]], %inner_inner_loop_a.us ]
; CHECK-NEXT: br label %inner_loop_exit.loopexit
;
; The original region exits the loop earlier.
;
; CHECK: inner_loop_begin.split:
; CHECK-NEXT: br label %inner_inner_loop_begin
;
; CHECK: inner_inner_loop_begin:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_a, label %inner_inner_loop_b
;
; CHECK: inner_inner_loop_a:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_latch, label %inner_loop_exit.loopexit.split
;
; CHECK: inner_inner_loop_b:
; CHECK-NEXT: br label %inner_inner_loop_exit
;
; CHECK: inner_inner_loop_latch:
; CHECK-NEXT: br label %inner_inner_loop_begin
inner_inner_loop_exit:
%a2 = load i32, i32* %a.ptr
%v4 = load i1, i1* %ptr
br i1 %v4, label %inner_loop_exit, label %inner_loop_begin
; CHECK: inner_inner_loop_exit:
; CHECK-NEXT: %[[A2]] = load i32, i32* %a.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_exit.loopexit1, label %inner_loop_begin
inner_loop_exit:
%v5 = load i1, i1* %ptr
br i1 %v5, label %loop_exit, label %loop_begin
; CHECK: inner_loop_exit.loopexit.split:
; CHECK-NEXT: %[[A_INNER_LCSSA:.*]] = phi i32 [ %[[A_INNER_PHI]], %inner_inner_loop_a ]
; CHECK-NEXT: br label %inner_loop_exit.loopexit
;
; CHECK: inner_loop_exit.loopexit:
; CHECK-NEXT: %[[A_INNER_US_PHI:.*]] = phi i32 [ %[[A_INNER_LCSSA]], %inner_loop_exit.loopexit.split ], [ %[[A_INNER_LCSSA_US]], %inner_loop_exit.loopexit.split.us ]
; CHECK-NEXT: br label %inner_loop_exit
;
; CHECK: inner_loop_exit.loopexit1:
; CHECK-NEXT: %[[A_INNER_LCSSA2:.*]] = phi i32 [ %[[A_INNER_PHI]], %inner_inner_loop_exit ]
; CHECK-NEXT: br label %inner_loop_exit
;
; CHECK: inner_loop_exit:
; CHECK-NEXT: %[[A_INNER_PHI:.*]] = phi i32 [ %[[A_INNER_LCSSA2]], %inner_loop_exit.loopexit1 ], [ %[[A_INNER_US_PHI]], %inner_loop_exit.loopexit ]
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_exit, label %loop_begin
loop_exit:
%a.lcssa = phi i32 [ %a.phi, %inner_loop_exit ]
ret i32 %a.lcssa
; CHECK: loop_exit:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A_INNER_PHI]], %inner_loop_exit ]
; CHECK-NEXT: ret i32 %[[A_LCSSA]]
}
; Same pattern as @test8a but where the original loop looses an exit block and
; needs to be hoisted up the nest.
define i32 @test8b(i1* %ptr, i1* %cond.ptr, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test8b(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %loop_begin
loop_begin:
%a = load i32, i32* %a.ptr
br label %inner_loop_begin
; CHECK: loop_begin:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_loop_begin
inner_loop_begin:
%a.phi = phi i32 [ %a, %loop_begin ], [ %a2, %inner_inner_loop_exit ]
%cond = load i1, i1* %cond.ptr
%b = load i32, i32* %b.ptr
br label %inner_inner_loop_begin
; CHECK: inner_loop_begin:
; CHECK-NEXT: %[[A_INNER_PHI:.*]] = phi i32 [ %[[A]], %loop_begin ], [ %[[A2:.*]], %inner_inner_loop_exit ]
; CHECK-NEXT: %[[COND:.*]] = load i1, i1* %cond.ptr
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br i1 %[[COND]], label %inner_loop_begin.split.us, label %inner_loop_begin.split
inner_inner_loop_begin:
%v1 = load i1, i1* %ptr
br i1 %v1, label %inner_inner_loop_a, label %inner_inner_loop_b
inner_inner_loop_a:
%v2 = load i1, i1* %ptr
br i1 %v2, label %inner_inner_loop_latch, label %inner_loop_exit
inner_inner_loop_b:
br i1 %cond, label %inner_inner_loop_exit, label %inner_inner_loop_latch
inner_inner_loop_latch:
br label %inner_inner_loop_begin
; The cloned region is similar to before but with one earlier exit.
;
; CHECK: inner_loop_begin.split.us:
; CHECK-NEXT: br label %inner_inner_loop_begin.us
;
; CHECK: inner_inner_loop_begin.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_a.us, label %inner_inner_loop_b.us
;
; CHECK: inner_inner_loop_b.us:
; CHECK-NEXT: br label %inner_inner_loop_exit.split.us
;
; CHECK: inner_inner_loop_a.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_latch.us, label %inner_loop_exit.loopexit.split.us
;
; CHECK: inner_inner_loop_latch.us:
; CHECK-NEXT: br label %inner_inner_loop_begin.us
;
; CHECK: inner_inner_loop_exit.split.us:
; CHECK-NEXT: br label %inner_inner_loop_exit
;
; CHECK: inner_loop_exit.loopexit.split.us:
; CHECK-NEXT: %[[A_INNER_LCSSA_US:.*]] = phi i32 [ %[[A_INNER_PHI]], %inner_inner_loop_a.us ]
; CHECK-NEXT: br label %inner_loop_exit.loopexit
;
; The original region is now an exit in the preheader.
;
; CHECK: inner_loop_begin.split:
; CHECK-NEXT: %[[A_INNER_INNER_LCSSA:.*]] = phi i32 [ %[[A_INNER_PHI]], %inner_loop_begin ]
; CHECK-NEXT: br label %inner_inner_loop_begin
;
; CHECK: inner_inner_loop_begin:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_a, label %inner_inner_loop_b
;
; CHECK: inner_inner_loop_a:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_latch, label %inner_loop_exit.loopexit.split
;
; CHECK: inner_inner_loop_b:
; CHECK-NEXT: br label %inner_inner_loop_latch
;
; CHECK: inner_inner_loop_latch:
; CHECK-NEXT: br label %inner_inner_loop_begin
inner_inner_loop_exit:
%a2 = load i32, i32* %a.ptr
%v4 = load i1, i1* %ptr
br i1 %v4, label %inner_loop_exit, label %inner_loop_begin
; CHECK: inner_inner_loop_exit:
; CHECK-NEXT: %[[A2]] = load i32, i32* %a.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_exit.loopexit1, label %inner_loop_begin
inner_loop_exit:
%v5 = load i1, i1* %ptr
br i1 %v5, label %loop_exit, label %loop_begin
; CHECK: inner_loop_exit.loopexit.split:
; CHECK-NEXT: %[[A_INNER_LCSSA:.*]] = phi i32 [ %[[A_INNER_INNER_LCSSA]], %inner_inner_loop_a ]
; CHECK-NEXT: br label %inner_loop_exit.loopexit
;
; CHECK: inner_loop_exit.loopexit:
; CHECK-NEXT: %[[A_INNER_US_PHI:.*]] = phi i32 [ %[[A_INNER_LCSSA]], %inner_loop_exit.loopexit.split ], [ %[[A_INNER_LCSSA_US]], %inner_loop_exit.loopexit.split.us ]
; CHECK-NEXT: br label %inner_loop_exit
;
; CHECK: inner_loop_exit.loopexit1:
; CHECK-NEXT: %[[A_INNER_LCSSA2:.*]] = phi i32 [ %[[A_INNER_PHI]], %inner_inner_loop_exit ]
; CHECK-NEXT: br label %inner_loop_exit
;
; CHECK: inner_loop_exit:
; CHECK-NEXT: %[[A_INNER_PHI:.*]] = phi i32 [ %[[A_INNER_LCSSA2]], %inner_loop_exit.loopexit1 ], [ %[[A_INNER_US_PHI]], %inner_loop_exit.loopexit ]
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_exit, label %loop_begin
loop_exit:
%a.lcssa = phi i32 [ %a.phi, %inner_loop_exit ]
ret i32 %a.lcssa
; CHECK: loop_exit:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A_INNER_PHI]], %inner_loop_exit ]
; CHECK-NEXT: ret i32 %[[A_LCSSA]]
}
; Test for when unswitching produces a clone of an inner loop but
; the clone no longer has an exiting edge *at all* and loops infinitely.
; Because it doesn't ever exit to the outer loop it is no longer an inner loop
; but needs to be hoisted up the nest to be a top-level loop.
define i32 @test9a(i1* %ptr, i1* %cond.ptr, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test9a(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %loop_begin
loop_begin:
%b = load i32, i32* %b.ptr
%cond = load i1, i1* %cond.ptr
br label %inner_loop_begin
; CHECK: loop_begin:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: %[[COND:.*]] = load i1, i1* %cond.ptr
; CHECK-NEXT: br i1 %[[COND]], label %loop_begin.split.us, label %loop_begin.split
inner_loop_begin:
%a = load i32, i32* %a.ptr
br i1 %cond, label %inner_loop_latch, label %inner_loop_exit
inner_loop_latch:
call void @sink1(i32 %b)
br label %inner_loop_begin
; The cloned inner loop ends up as an infinite loop and thus being a top-level
; loop with the preheader as an exit block of the outer loop.
;
; CHECK: loop_begin.split.us
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B]], %loop_begin ]
; CHECK-NEXT: br label %inner_loop_begin.us
;
; CHECK: inner_loop_begin.us:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_loop_latch.us
;
; CHECK: inner_loop_latch.us:
; CHECK-NEXT: call void @sink1(i32 %[[B_LCSSA]])
; CHECK-NEXT: br label %inner_loop_begin.us
;
; The original loop becomes boring non-loop code.
;
; CHECK: loop_begin.split
; CHECK-NEXT: br label %inner_loop_begin
;
; CHECK: inner_loop_begin:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_loop_exit
inner_loop_exit:
%a.inner_lcssa = phi i32 [ %a, %inner_loop_begin ]
%v = load i1, i1* %ptr
br i1 %v, label %loop_begin, label %loop_exit
; CHECK: inner_loop_exit:
; CHECK-NEXT: %[[A_INNER_LCSSA:.*]] = phi i32 [ %[[A]], %inner_loop_begin ]
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin, label %loop_exit
loop_exit:
%a.lcssa = phi i32 [ %a.inner_lcssa, %inner_loop_exit ]
ret i32 %a.lcssa
; CHECK: loop_exit:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A_INNER_LCSSA]], %inner_loop_exit ]
; CHECK-NEXT: ret i32 %[[A_LCSSA]]
}
; The same core pattern as @test9a, but instead of the cloned loop becoming an
; infinite loop, the original loop has its only exit unswitched and the
; original loop becomes infinite and must be hoisted out of the loop nest.
define i32 @test9b(i1* %ptr, i1* %cond.ptr, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test9b(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %loop_begin
loop_begin:
%b = load i32, i32* %b.ptr
%cond = load i1, i1* %cond.ptr
br label %inner_loop_begin
; CHECK: loop_begin:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: %[[COND:.*]] = load i1, i1* %cond.ptr
; CHECK-NEXT: br i1 %[[COND]], label %loop_begin.split.us, label %loop_begin.split
inner_loop_begin:
%a = load i32, i32* %a.ptr
br i1 %cond, label %inner_loop_exit, label %inner_loop_latch
inner_loop_latch:
call void @sink1(i32 %b)
br label %inner_loop_begin
; The cloned inner loop becomes a boring non-loop.
;
; CHECK: loop_begin.split.us
; CHECK-NEXT: br label %inner_loop_begin.us
;
; CHECK: inner_loop_begin.us:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_loop_exit.split.us
;
; CHECK: inner_loop_exit.split.us
; CHECK-NEXT: %[[A_INNER_LCSSA_US:.*]] = phi i32 [ %[[A]], %inner_loop_begin.us ]
; CHECK-NEXT: br label %inner_loop_exit
;
; The original loop becomes an infinite loop and thus a top-level loop with the
; preheader as an exit block for the outer loop.
;
; CHECK: loop_begin.split
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B]], %loop_begin ]
; CHECK-NEXT: br label %inner_loop_begin
;
; CHECK: inner_loop_begin:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_loop_latch
;
; CHECK: inner_loop_latch:
; CHECK-NEXT: call void @sink1(i32 %[[B_LCSSA]])
; CHECK-NEXT: br label %inner_loop_begin
inner_loop_exit:
%a.inner_lcssa = phi i32 [ %a, %inner_loop_begin ]
%v = load i1, i1* %ptr
br i1 %v, label %loop_begin, label %loop_exit
; CHECK: inner_loop_exit:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin, label %loop_exit
loop_exit:
%a.lcssa = phi i32 [ %a.inner_lcssa, %inner_loop_exit ]
ret i32 %a.lcssa
; CHECK: loop_exit:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A_INNER_LCSSA_US]], %inner_loop_exit ]
; CHECK-NEXT: ret i32 %[[A_LCSSA]]
}
; Test that requires re-forming dedicated exits for the cloned loop.
define i32 @test10a(i1* %ptr, i1 %cond, i32* %a.ptr) {
; CHECK-LABEL: @test10a(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond, label %entry.split.us, label %entry.split
loop_begin:
%a = load i32, i32* %a.ptr
%v1 = load i1, i1* %ptr
br i1 %v1, label %loop_a, label %loop_b
loop_a:
%v2 = load i1, i1* %ptr
br i1 %v2, label %loop_exit, label %loop_begin
loop_b:
br i1 %cond, label %loop_exit, label %loop_begin
; The cloned loop with one edge as a direct exit.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_a.us, label %loop_b.us
;
; CHECK: loop_b.us:
; CHECK-NEXT: %[[A_LCSSA_B:.*]] = phi i32 [ %[[A]], %loop_begin.us ]
; CHECK-NEXT: br label %loop_exit.split.us
;
; CHECK: loop_a.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_exit.split.us.loopexit, label %loop_begin.backedge.us
;
; CHECK: loop_begin.backedge.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_exit.split.us.loopexit:
; CHECK-NEXT: %[[A_LCSSA_A:.*]] = phi i32 [ %[[A]], %loop_a.us ]
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit.split.us:
; CHECK-NEXT: %[[A_PHI_US:.*]] = phi i32 [ %[[A_LCSSA_B]], %loop_b.us ], [ %[[A_LCSSA_A]], %loop_exit.split.us.loopexit ]
; CHECK-NEXT: br label %loop_exit
; The original loop without one 'loop_exit' edge.
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_a, label %loop_b
;
; CHECK: loop_a:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_exit.split, label %loop_begin.backedge
;
; CHECK: loop_begin.backedge:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_b:
; CHECK-NEXT: br label %loop_begin.backedge
;
; CHECK: loop_exit.split:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A]], %loop_a ]
; CHECK-NEXT: br label %loop_exit
loop_exit:
%a.lcssa = phi i32 [ %a, %loop_a ], [ %a, %loop_b ]
ret i32 %a.lcssa
; CHECK: loop_exit:
; CHECK-NEXT: %[[A_PHI:.*]] = phi i32 [ %[[A_LCSSA]], %loop_exit.split ], [ %[[A_PHI_US]], %loop_exit.split.us ]
; CHECK-NEXT: ret i32 %[[A_PHI]]
}
; Test that requires re-forming dedicated exits for the original loop.
define i32 @test10b(i1* %ptr, i1 %cond, i32* %a.ptr) {
; CHECK-LABEL: @test10b(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond, label %entry.split.us, label %entry.split
loop_begin:
%a = load i32, i32* %a.ptr
%v1 = load i1, i1* %ptr
br i1 %v1, label %loop_a, label %loop_b
loop_a:
%v2 = load i1, i1* %ptr
br i1 %v2, label %loop_begin, label %loop_exit
loop_b:
br i1 %cond, label %loop_begin, label %loop_exit
; The cloned loop without one of the exits.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_a.us, label %loop_b.us
;
; CHECK: loop_b.us:
; CHECK-NEXT: br label %loop_begin.backedge.us
;
; CHECK: loop_a.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin.backedge.us, label %loop_exit.split.us
;
; CHECK: loop_begin.backedge.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_exit.split.us:
; CHECK-NEXT: %[[A_LCSSA_US:.*]] = phi i32 [ %[[A]], %loop_a.us ]
; CHECK-NEXT: br label %loop_exit
; The original loop without one 'loop_exit' edge.
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_a, label %loop_b
;
; CHECK: loop_a:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin.backedge, label %loop_exit.split.loopexit
;
; CHECK: loop_begin.backedge:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_b:
; CHECK-NEXT: %[[A_LCSSA_B:.*]] = phi i32 [ %[[A]], %loop_begin ]
; CHECK-NEXT: br label %loop_exit.split
;
; CHECK: loop_exit.split.loopexit:
; CHECK-NEXT: %[[A_LCSSA_A:.*]] = phi i32 [ %[[A]], %loop_a ]
; CHECK-NEXT: br label %loop_exit.split
;
; CHECK: loop_exit.split:
; CHECK-NEXT: %[[A_PHI_SPLIT:.*]] = phi i32 [ %[[A_LCSSA_B]], %loop_b ], [ %[[A_LCSSA_A]], %loop_exit.split.loopexit ]
; CHECK-NEXT: br label %loop_exit
loop_exit:
%a.lcssa = phi i32 [ %a, %loop_a ], [ %a, %loop_b ]
ret i32 %a.lcssa
; CHECK: loop_exit:
; CHECK-NEXT: %[[A_PHI:.*]] = phi i32 [ %[[A_PHI_SPLIT]], %loop_exit.split ], [ %[[A_LCSSA_US]], %loop_exit.split.us ]
; CHECK-NEXT: ret i32 %[[A_PHI]]
}
; Check that if a cloned inner loop after unswitching doesn't loop and directly
; exits even an outer loop, we don't add the cloned preheader to the outer
; loop and do add the needed LCSSA phi nodes for the new exit block from the
; outer loop.
define i32 @test11a(i1* %ptr, i1* %cond.ptr, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test11a(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %loop_begin
loop_begin:
%b = load i32, i32* %b.ptr
%v1 = load i1, i1* %ptr
br i1 %v1, label %loop_latch, label %inner_loop_ph
; CHECK: loop_begin:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_latch, label %inner_loop_ph
inner_loop_ph:
%cond = load i1, i1* %cond.ptr
br label %inner_loop_begin
; CHECK: inner_loop_ph:
; CHECK-NEXT: %[[COND:.*]] = load i1, i1* %cond.ptr
; CHECK-NEXT: br i1 %[[COND]], label %inner_loop_ph.split.us, label %inner_loop_ph.split
inner_loop_begin:
call void @sink1(i32 %b)
%a = load i32, i32* %a.ptr
br i1 %cond, label %loop_exit, label %inner_loop_a
inner_loop_a:
%v2 = load i1, i1* %ptr
br i1 %v2, label %inner_loop_exit, label %inner_loop_begin
; The cloned path doesn't actually loop and is an exit from the outer loop as
; well.
;
; CHECK: inner_loop_ph.split.us:
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B]], %inner_loop_ph ]
; CHECK-NEXT: br label %inner_loop_begin.us
;
; CHECK: inner_loop_begin.us:
; CHECK-NEXT: call void @sink1(i32 %[[B_LCSSA]])
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %loop_exit.loopexit.split.us
;
; CHECK: loop_exit.loopexit.split.us:
; CHECK-NEXT: %[[A_INNER_LCSSA_US:.*]] = phi i32 [ %[[A]], %inner_loop_begin.us ]
; CHECK-NEXT: br label %loop_exit.loopexit
;
; The original remains a loop losing the exit edge.
;
; CHECK: inner_loop_ph.split:
; CHECK-NEXT: br label %inner_loop_begin
;
; CHECK: inner_loop_begin:
; CHECK-NEXT: call void @sink1(i32 %[[B]])
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_loop_a
;
; CHECK: inner_loop_a:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_exit, label %inner_loop_begin
inner_loop_exit:
%a.inner_lcssa = phi i32 [ %a, %inner_loop_a ]
%v3 = load i1, i1* %ptr
br i1 %v3, label %loop_latch, label %loop_exit
; CHECK: inner_loop_exit:
; CHECK-NEXT: %[[A_INNER_LCSSA:.*]] = phi i32 [ %[[A]], %inner_loop_a ]
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_latch, label %loop_exit.loopexit1
loop_latch:
br label %loop_begin
; CHECK: loop_latch:
; CHECK-NEXT: br label %loop_begin
loop_exit:
%a.lcssa = phi i32 [ %a, %inner_loop_begin ], [ %a.inner_lcssa, %inner_loop_exit ]
ret i32 %a.lcssa
; CHECK: loop_exit.loopexit:
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit.loopexit1:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A_INNER_LCSSA]], %inner_loop_exit ]
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit:
; CHECK-NEXT: %[[A_PHI:.*]] = phi i32 [ %[[A_INNER_LCSSA_US]], %loop_exit.loopexit ], [ %[[A_LCSSA]], %loop_exit.loopexit1 ]
; CHECK-NEXT: ret i32 %[[A_PHI]]
}
; Check that if the original inner loop after unswitching doesn't loop and
; directly exits even an outer loop, we remove the original preheader from the
; outer loop and add needed LCSSA phi nodes for the new exit block from the
; outer loop.
define i32 @test11b(i1* %ptr, i1* %cond.ptr, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test11b(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %loop_begin
loop_begin:
%b = load i32, i32* %b.ptr
%v1 = load i1, i1* %ptr
br i1 %v1, label %loop_latch, label %inner_loop_ph
; CHECK: loop_begin:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_latch, label %inner_loop_ph
inner_loop_ph:
%cond = load i1, i1* %cond.ptr
br label %inner_loop_begin
; CHECK: inner_loop_ph:
; CHECK-NEXT: %[[COND:.*]] = load i1, i1* %cond.ptr
; CHECK-NEXT: br i1 %[[COND]], label %inner_loop_ph.split.us, label %inner_loop_ph.split
inner_loop_begin:
call void @sink1(i32 %b)
%a = load i32, i32* %a.ptr
br i1 %cond, label %inner_loop_a, label %loop_exit
inner_loop_a:
%v2 = load i1, i1* %ptr
br i1 %v2, label %inner_loop_exit, label %inner_loop_begin
; The cloned path continues to loop without the exit out of the entire nest.
;
; CHECK: inner_loop_ph.split.us:
; CHECK-NEXT: br label %inner_loop_begin.us
;
; CHECK: inner_loop_begin.us:
; CHECK-NEXT: call void @sink1(i32 %[[B]])
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_loop_a.us
;
; CHECK: inner_loop_a.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_exit.split.us, label %inner_loop_begin.us
;
; CHECK: inner_loop_exit.split.us:
; CHECK-NEXT: %[[A_INNER_LCSSA_US:.*]] = phi i32 [ %[[A]], %inner_loop_a.us ]
; CHECK-NEXT: br label %inner_loop_exit
;
; The original remains a loop losing the exit edge.
;
; CHECK: inner_loop_ph.split:
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B]], %inner_loop_ph ]
; CHECK-NEXT: br label %inner_loop_begin
;
; CHECK: inner_loop_begin:
; CHECK-NEXT: call void @sink1(i32 %[[B_LCSSA]])
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %loop_exit.loopexit
inner_loop_exit:
%a.inner_lcssa = phi i32 [ %a, %inner_loop_a ]
%v3 = load i1, i1* %ptr
br i1 %v3, label %loop_latch, label %loop_exit
; CHECK: inner_loop_exit:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_latch, label %loop_exit.loopexit1
loop_latch:
br label %loop_begin
; CHECK: loop_latch:
; CHECK-NEXT: br label %loop_begin
loop_exit:
%a.lcssa = phi i32 [ %a, %inner_loop_begin ], [ %a.inner_lcssa, %inner_loop_exit ]
ret i32 %a.lcssa
; CHECK: loop_exit.loopexit:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A]], %inner_loop_begin ]
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit.loopexit1:
; CHECK-NEXT: %[[A_LCSSA_US:.*]] = phi i32 [ %[[A_INNER_LCSSA_US]], %inner_loop_exit ]
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit:
; CHECK-NEXT: %[[A_PHI:.*]] = phi i32 [ %[[A_LCSSA]], %loop_exit.loopexit ], [ %[[A_LCSSA_US]], %loop_exit.loopexit1 ]
; CHECK-NEXT: ret i32 %[[A_PHI]]
}
; Like test11a, but checking that when the whole thing is wrapped in yet
; another loop, we correctly attribute the cloned preheader to that outermost
; loop rather than only handling the case where the preheader is not in any loop
; at all.
define i32 @test12a(i1* %ptr, i1* %cond.ptr, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test12a(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %loop_begin
loop_begin:
br label %inner_loop_begin
; CHECK: loop_begin:
; CHECK-NEXT: br label %inner_loop_begin
inner_loop_begin:
%b = load i32, i32* %b.ptr
%v1 = load i1, i1* %ptr
br i1 %v1, label %inner_loop_latch, label %inner_inner_loop_ph
; CHECK: inner_loop_begin:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_latch, label %inner_inner_loop_ph
inner_inner_loop_ph:
%cond = load i1, i1* %cond.ptr
br label %inner_inner_loop_begin
; CHECK: inner_inner_loop_ph:
; CHECK-NEXT: %[[COND:.*]] = load i1, i1* %cond.ptr
; CHECK-NEXT: br i1 %[[COND]], label %inner_inner_loop_ph.split.us, label %inner_inner_loop_ph.split
inner_inner_loop_begin:
call void @sink1(i32 %b)
%a = load i32, i32* %a.ptr
br i1 %cond, label %inner_loop_exit, label %inner_inner_loop_a
inner_inner_loop_a:
%v2 = load i1, i1* %ptr
br i1 %v2, label %inner_inner_loop_exit, label %inner_inner_loop_begin
; The cloned path doesn't actually loop and is an exit from the outer loop as
; well.
;
; CHECK: inner_inner_loop_ph.split.us:
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B]], %inner_inner_loop_ph ]
; CHECK-NEXT: br label %inner_inner_loop_begin.us
;
; CHECK: inner_inner_loop_begin.us:
; CHECK-NEXT: call void @sink1(i32 %[[B_LCSSA]])
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_loop_exit.loopexit.split.us
;
; CHECK: inner_loop_exit.loopexit.split.us:
; CHECK-NEXT: %[[A_INNER_INNER_LCSSA_US:.*]] = phi i32 [ %[[A]], %inner_inner_loop_begin.us ]
; CHECK-NEXT: br label %inner_loop_exit.loopexit
;
; The original remains a loop losing the exit edge.
;
; CHECK: inner_inner_loop_ph.split:
; CHECK-NEXT: br label %inner_inner_loop_begin
;
; CHECK: inner_inner_loop_begin:
; CHECK-NEXT: call void @sink1(i32 %[[B]])
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_inner_loop_a
;
; CHECK: inner_inner_loop_a:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_exit, label %inner_inner_loop_begin
inner_inner_loop_exit:
%a.inner_inner_lcssa = phi i32 [ %a, %inner_inner_loop_a ]
%v3 = load i1, i1* %ptr
br i1 %v3, label %inner_loop_latch, label %inner_loop_exit
; CHECK: inner_inner_loop_exit:
; CHECK-NEXT: %[[A_INNER_INNER_LCSSA:.*]] = phi i32 [ %[[A]], %inner_inner_loop_a ]
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_latch, label %inner_loop_exit.loopexit1
inner_loop_latch:
br label %inner_loop_begin
; CHECK: inner_loop_latch:
; CHECK-NEXT: br label %inner_loop_begin
inner_loop_exit:
%a.inner_lcssa = phi i32 [ %a, %inner_inner_loop_begin ], [ %a.inner_inner_lcssa, %inner_inner_loop_exit ]
%v4 = load i1, i1* %ptr
br i1 %v4, label %loop_begin, label %loop_exit
; CHECK: inner_loop_exit.loopexit:
; CHECK-NEXT: br label %inner_loop_exit
;
; CHECK: inner_loop_exit.loopexit1:
; CHECK-NEXT: %[[A_INNER_LCSSA:.*]] = phi i32 [ %[[A_INNER_INNER_LCSSA]], %inner_inner_loop_exit ]
; CHECK-NEXT: br label %inner_loop_exit
;
; CHECK: inner_loop_exit:
; CHECK-NEXT: %[[A_INNER_PHI:.*]] = phi i32 [ %[[A_INNER_INNER_LCSSA_US]], %inner_loop_exit.loopexit ], [ %[[A_INNER_LCSSA]], %inner_loop_exit.loopexit1 ]
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin, label %loop_exit
loop_exit:
%a.lcssa = phi i32 [ %a.inner_lcssa, %inner_loop_exit ]
ret i32 %a.lcssa
; CHECK: loop_exit:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A_INNER_PHI]], %inner_loop_exit ]
; CHECK-NEXT: ret i32 %[[A_LCSSA]]
}
; Like test11b, but checking that when the whole thing is wrapped in yet
; another loop, we correctly sink the preheader to the outermost loop rather
; than only handling the case where the preheader is completely removed from
; a loop.
define i32 @test12b(i1* %ptr, i1* %cond.ptr, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test12b(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %loop_begin
loop_begin:
br label %inner_loop_begin
; CHECK: loop_begin:
; CHECK-NEXT: br label %inner_loop_begin
inner_loop_begin:
%b = load i32, i32* %b.ptr
%v1 = load i1, i1* %ptr
br i1 %v1, label %inner_loop_latch, label %inner_inner_loop_ph
; CHECK: inner_loop_begin:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_latch, label %inner_inner_loop_ph
inner_inner_loop_ph:
%cond = load i1, i1* %cond.ptr
br label %inner_inner_loop_begin
; CHECK: inner_inner_loop_ph:
; CHECK-NEXT: %[[COND:.*]] = load i1, i1* %cond.ptr
; CHECK-NEXT: br i1 %[[COND]], label %inner_inner_loop_ph.split.us, label %inner_inner_loop_ph.split
inner_inner_loop_begin:
call void @sink1(i32 %b)
%a = load i32, i32* %a.ptr
br i1 %cond, label %inner_inner_loop_a, label %inner_loop_exit
inner_inner_loop_a:
%v2 = load i1, i1* %ptr
br i1 %v2, label %inner_inner_loop_exit, label %inner_inner_loop_begin
; The cloned path continues to loop without the exit out of the entire nest.
;
; CHECK: inner_inner_loop_ph.split.us:
; CHECK-NEXT: br label %inner_inner_loop_begin.us
;
; CHECK: inner_inner_loop_begin.us:
; CHECK-NEXT: call void @sink1(i32 %[[B]])
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_inner_loop_a.us
;
; CHECK: inner_inner_loop_a.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_inner_loop_exit.split.us, label %inner_inner_loop_begin.us
;
; CHECK: inner_inner_loop_exit.split.us:
; CHECK-NEXT: %[[A_INNER_INNER_LCSSA_US:.*]] = phi i32 [ %[[A]], %inner_inner_loop_a.us ]
; CHECK-NEXT: br label %inner_inner_loop_exit
;
; The original remains a loop losing the exit edge.
;
; CHECK: inner_inner_loop_ph.split:
; CHECK-NEXT: %[[B_LCSSA:.*]] = phi i32 [ %[[B]], %inner_inner_loop_ph ]
; CHECK-NEXT: br label %inner_inner_loop_begin
;
; CHECK: inner_inner_loop_begin:
; CHECK-NEXT: call void @sink1(i32 %[[B_LCSSA]])
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: br label %inner_loop_exit.loopexit
inner_inner_loop_exit:
%a.inner_inner_lcssa = phi i32 [ %a, %inner_inner_loop_a ]
%v3 = load i1, i1* %ptr
br i1 %v3, label %inner_loop_latch, label %inner_loop_exit
; CHECK: inner_inner_loop_exit:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %inner_loop_latch, label %inner_loop_exit.loopexit1
inner_loop_latch:
br label %inner_loop_begin
; CHECK: inner_loop_latch:
; CHECK-NEXT: br label %inner_loop_begin
inner_loop_exit:
%a.inner_lcssa = phi i32 [ %a, %inner_inner_loop_begin ], [ %a.inner_inner_lcssa, %inner_inner_loop_exit ]
%v4 = load i1, i1* %ptr
br i1 %v4, label %loop_begin, label %loop_exit
; CHECK: inner_loop_exit.loopexit:
; CHECK-NEXT: %[[A_INNER_LCSSA:.*]] = phi i32 [ %[[A]], %inner_inner_loop_begin ]
; CHECK-NEXT: br label %inner_loop_exit
;
; CHECK: inner_loop_exit.loopexit1:
; CHECK-NEXT: %[[A_INNER_LCSSA_US:.*]] = phi i32 [ %[[A_INNER_INNER_LCSSA_US]], %inner_inner_loop_exit ]
; CHECK-NEXT: br label %inner_loop_exit
;
; CHECK: inner_loop_exit:
; CHECK-NEXT: %[[A_INNER_PHI:.*]] = phi i32 [ %[[A_INNER_LCSSA]], %inner_loop_exit.loopexit ], [ %[[A_INNER_LCSSA_US]], %inner_loop_exit.loopexit1 ]
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin, label %loop_exit
loop_exit:
%a.lcssa = phi i32 [ %a.inner_lcssa, %inner_loop_exit ]
ret i32 %a.lcssa
; CHECK: loop_exit:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A_INNER_PHI]], %inner_loop_exit ]
; CHECK-NEXT: ret i32 %[[A_LCSSA]]
}
; Test where the cloned loop has an inner loop that has to be traversed to form
; the cloned loop, and where this inner loop has multiple blocks, and where the
; exiting block that connects the inner loop to the cloned loop is not the header
; block. This ensures that we correctly handle interesting corner cases of
; traversing back to the header when establishing the cloned loop.
define i32 @test13a(i1* %ptr, i1 %cond, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test13a(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond, label %entry.split.us, label %entry.split
loop_begin:
%a = load i32, i32* %a.ptr
%v1 = load i1, i1* %ptr
br i1 %v1, label %loop_a, label %loop_b
loop_a:
%v2 = load i1, i1* %ptr
br i1 %v2, label %loop_exit, label %loop_latch
loop_b:
%b = load i32, i32* %b.ptr
br i1 %cond, label %loop_b_inner_ph, label %loop_exit
loop_b_inner_ph:
br label %loop_b_inner_header
loop_b_inner_header:
%v3 = load i1, i1* %ptr
br i1 %v3, label %loop_b_inner_latch, label %loop_b_inner_body
loop_b_inner_body:
%v4 = load i1, i1* %ptr
br i1 %v4, label %loop_b_inner_latch, label %loop_b_inner_exit
loop_b_inner_latch:
br label %loop_b_inner_header
loop_b_inner_exit:
br label %loop_latch
loop_latch:
br label %loop_begin
; The cloned loop contains an inner loop within it.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_a.us, label %loop_b.us
;
; CHECK: loop_b.us:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br label %loop_b_inner_ph.us
;
; CHECK: loop_b_inner_ph.us:
; CHECK-NEXT: br label %loop_b_inner_header.us
;
; CHECK: loop_b_inner_header.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_b_inner_latch.us, label %loop_b_inner_body.us
;
; CHECK: loop_b_inner_body.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_b_inner_latch.us, label %loop_b_inner_exit.us
;
; CHECK: loop_b_inner_exit.us:
; CHECK-NEXT: br label %loop_latch.us
;
; CHECK: loop_b_inner_latch.us:
; CHECK-NEXT: br label %loop_b_inner_header.us
;
; CHECK: loop_a.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_exit.split.us, label %loop_latch.us
;
; CHECK: loop_latch.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_exit.split.us:
; CHECK-NEXT: %[[A_LCSSA_US:.*]] = phi i32 [ %[[A]], %loop_a.us ]
; CHECK-NEXT: br label %loop_exit
;
; And the original loop no longer contains an inner loop.
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_a, label %loop_b
;
; CHECK: loop_a:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_exit.split.loopexit, label %loop_latch
;
; CHECK: loop_b:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br label %loop_exit.split
;
; CHECK: loop_latch:
; CHECK-NEXT: br label %loop_begin
loop_exit:
%lcssa = phi i32 [ %a, %loop_a ], [ %b, %loop_b ]
ret i32 %lcssa
; CHECK: loop_exit.split.loopexit:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A]], %loop_a ]
; CHECK-NEXT: br label %loop_exit.split
;
; CHECK: loop_exit.split:
; CHECK-NEXT: %[[AB_PHI:.*]] = phi i32 [ %[[B]], %loop_b ], [ %[[A_LCSSA]], %loop_exit.split.loopexit ]
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit:
; CHECK-NEXT: %[[AB_PHI_US:.*]] = phi i32 [ %[[AB_PHI]], %loop_exit.split ], [ %[[A_LCSSA_US]], %loop_exit.split.us ]
; CHECK-NEXT: ret i32 %[[AB_PHI_US]]
}
; Test where the original loop has an inner loop that has to be traversed to
; rebuild the loop, and where this inner loop has multiple blocks, and where
; the exiting block that connects the inner loop to the original loop is not
; the header block. This ensures that we correctly handle interesting corner
; cases of traversing back to the header when re-establishing the original loop
; still exists after unswitching.
define i32 @test13b(i1* %ptr, i1 %cond, i32* %a.ptr, i32* %b.ptr) {
; CHECK-LABEL: @test13b(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond, label %entry.split.us, label %entry.split
loop_begin:
%a = load i32, i32* %a.ptr
%v1 = load i1, i1* %ptr
br i1 %v1, label %loop_a, label %loop_b
loop_a:
%v2 = load i1, i1* %ptr
br i1 %v2, label %loop_exit, label %loop_latch
loop_b:
%b = load i32, i32* %b.ptr
br i1 %cond, label %loop_exit, label %loop_b_inner_ph
loop_b_inner_ph:
br label %loop_b_inner_header
loop_b_inner_header:
%v3 = load i1, i1* %ptr
br i1 %v3, label %loop_b_inner_latch, label %loop_b_inner_body
loop_b_inner_body:
%v4 = load i1, i1* %ptr
br i1 %v4, label %loop_b_inner_latch, label %loop_b_inner_exit
loop_b_inner_latch:
br label %loop_b_inner_header
loop_b_inner_exit:
br label %loop_latch
loop_latch:
br label %loop_begin
; The cloned loop doesn't contain an inner loop.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_a.us, label %loop_b.us
;
; CHECK: loop_b.us:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br label %loop_exit.split.us
;
; CHECK: loop_a.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_exit.split.us.loopexit, label %loop_latch.us
;
; CHECK: loop_latch.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_exit.split.us.loopexit:
; CHECK-NEXT: %[[A_LCSSA_US:.*]] = phi i32 [ %[[A]], %loop_a.us ]
; CHECK-NEXT: br label %loop_exit.split.us
;
; CHECK: loop_exit.split.us:
; CHECK-NEXT: %[[AB_PHI_US:.*]] = phi i32 [ %[[B]], %loop_b.us ], [ %[[A_LCSSA_US]], %loop_exit.split.us.loopexit ]
; CHECK-NEXT: br label %loop_exit
;
; But the original loop contains an inner loop that must be traversed.;
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[A:.*]] = load i32, i32* %a.ptr
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_a, label %loop_b
;
; CHECK: loop_a:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_exit.split, label %loop_latch
;
; CHECK: loop_b:
; CHECK-NEXT: %[[B:.*]] = load i32, i32* %b.ptr
; CHECK-NEXT: br label %loop_b_inner_ph
;
; CHECK: loop_b_inner_ph:
; CHECK-NEXT: br label %loop_b_inner_header
;
; CHECK: loop_b_inner_header:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_b_inner_latch, label %loop_b_inner_body
;
; CHECK: loop_b_inner_body:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_b_inner_latch, label %loop_b_inner_exit
;
; CHECK: loop_b_inner_latch:
; CHECK-NEXT: br label %loop_b_inner_header
;
; CHECK: loop_b_inner_exit:
; CHECK-NEXT: br label %loop_latch
;
; CHECK: loop_latch:
; CHECK-NEXT: br label %loop_begin
loop_exit:
%lcssa = phi i32 [ %a, %loop_a ], [ %b, %loop_b ]
ret i32 %lcssa
; CHECK: loop_exit.split:
; CHECK-NEXT: %[[A_LCSSA:.*]] = phi i32 [ %[[A]], %loop_a ]
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit:
; CHECK-NEXT: %[[AB_PHI:.*]] = phi i32 [ %[[A_LCSSA]], %loop_exit.split ], [ %[[AB_PHI_US]], %loop_exit.split.us ]
; CHECK-NEXT: ret i32 %[[AB_PHI]]
}
define i32 @test20(i32* %var, i32 %cond1, i32 %cond2) {
; CHECK-LABEL: @test20(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: switch i32 %cond2, label %[[ENTRY_SPLIT_EXIT:.*]] [
; CHECK-NEXT: i32 0, label %[[ENTRY_SPLIT_A:.*]]
; CHECK-NEXT: i32 1, label %[[ENTRY_SPLIT_A]]
; CHECK-NEXT: i32 13, label %[[ENTRY_SPLIT_B:.*]]
; CHECK-NEXT: i32 2, label %[[ENTRY_SPLIT_A]]
; CHECK-NEXT: i32 42, label %[[ENTRY_SPLIT_C:.*]]
; CHECK-NEXT: ]
loop_begin:
%var_val = load i32, i32* %var
switch i32 %cond2, label %loop_exit [
i32 0, label %loop_a
i32 1, label %loop_a
i32 13, label %loop_b
i32 2, label %loop_a
i32 42, label %loop_c
]
loop_a:
call i32 @a()
br label %loop_latch
; Unswitched 'a' loop.
;
; CHECK: [[ENTRY_SPLIT_A]]:
; CHECK-NEXT: br label %[[LOOP_BEGIN_A:.*]]
;
; CHECK: [[LOOP_BEGIN_A]]:
; CHECK-NEXT: %{{.*}} = load i32, i32* %var
; CHECK-NEXT: br label %[[LOOP_A:.*]]
;
; CHECK: [[LOOP_A]]:
; CHECK-NEXT: call i32 @a()
; CHECK-NEXT: br label %[[LOOP_LATCH_A:.*]]
;
; CHECK: [[LOOP_LATCH_A]]:
; CHECK: br label %[[LOOP_BEGIN_A]]
loop_b:
call i32 @b()
br label %loop_latch
; Unswitched 'b' loop.
;
; CHECK: [[ENTRY_SPLIT_B]]:
; CHECK-NEXT: br label %[[LOOP_BEGIN_B:.*]]
;
; CHECK: [[LOOP_BEGIN_B]]:
; CHECK-NEXT: %{{.*}} = load i32, i32* %var
; CHECK-NEXT: br label %[[LOOP_B:.*]]
;
; CHECK: [[LOOP_B]]:
; CHECK-NEXT: call i32 @b()
; CHECK-NEXT: br label %[[LOOP_LATCH_B:.*]]
;
; CHECK: [[LOOP_LATCH_B]]:
; CHECK: br label %[[LOOP_BEGIN_B]]
loop_c:
call i32 @c() noreturn nounwind
br label %loop_latch
; Unswitched 'c' loop.
;
; CHECK: [[ENTRY_SPLIT_C]]:
; CHECK-NEXT: br label %[[LOOP_BEGIN_C:.*]]
;
; CHECK: [[LOOP_BEGIN_C]]:
; CHECK-NEXT: %{{.*}} = load i32, i32* %var
; CHECK-NEXT: br label %[[LOOP_C:.*]]
;
; CHECK: [[LOOP_C]]:
; CHECK-NEXT: call i32 @c()
; CHECK-NEXT: br label %[[LOOP_LATCH_C:.*]]
;
; CHECK: [[LOOP_LATCH_C]]:
; CHECK: br label %[[LOOP_BEGIN_C]]
loop_latch:
br label %loop_begin
loop_exit:
%lcssa = phi i32 [ %var_val, %loop_begin ]
ret i32 %lcssa
; Unswitched exit edge (no longer a loop).
;
; CHECK: [[ENTRY_SPLIT_EXIT]]:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[V:.*]] = load i32, i32* %var
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit:
; CHECK-NEXT: %[[LCSSA:.*]] = phi i32 [ %[[V]], %loop_begin ]
; CHECK-NEXT: ret i32 %[[LCSSA]]
}
; Negative test: we do not switch when the loop contains unstructured control
; flows as it would significantly complicate the process as novel loops might
; be formed, etc.
define void @test_no_unswitch_unstructured_cfg(i1* %ptr, i1 %cond) {
; CHECK-LABEL: @test_no_unswitch_unstructured_cfg(
entry:
br label %loop_begin
loop_begin:
br i1 %cond, label %loop_left, label %loop_right
loop_left:
%v1 = load i1, i1* %ptr
br i1 %v1, label %loop_right, label %loop_merge
loop_right:
%v2 = load i1, i1* %ptr
br i1 %v2, label %loop_left, label %loop_merge
loop_merge:
%v3 = load i1, i1* %ptr
br i1 %v3, label %loop_latch, label %loop_exit
loop_latch:
br label %loop_begin
loop_exit:
ret void
}
; A test reduced out of 403.gcc with interesting nested loops that trigger
; multiple unswitches. A key component of this test is that there are multiple
; paths to reach an inner loop after unswitching, and one of them is via the
; predecessors of the unswitched loop header. That can allow us to find the loop
; through multiple different paths.
define void @test21(i1 %a, i1 %b) {
; CHECK-LABEL: @test21(
bb:
br label %bb3
; CHECK-NOT: br i1 %a
;
; CHECK: br i1 %a, label %[[BB_SPLIT_US:.*]], label %[[BB_SPLIT:.*]]
;
; CHECK-NOT: br i1 %a
; CHECK-NOT: br i1 %b
;
; CHECK: [[BB_SPLIT]]:
; CHECK: br i1 %b
;
; CHECK-NOT: br i1 %a
; CHECK-NOT: br i1 %b
bb3:
%tmp1.0 = phi i32 [ 0, %bb ], [ %tmp1.3, %bb23 ]
br label %bb7
bb7:
%tmp.0 = phi i1 [ true, %bb3 ], [ false, %bb19 ]
%tmp1.1 = phi i32 [ %tmp1.0, %bb3 ], [ %tmp1.2.lcssa, %bb19 ]
br i1 %tmp.0, label %bb11.preheader, label %bb23
bb11.preheader:
br i1 %a, label %bb19, label %bb14.lr.ph
bb14.lr.ph:
br label %bb14
bb14:
%tmp2.02 = phi i32 [ 0, %bb14.lr.ph ], [ 1, %bb14 ]
br i1 %b, label %bb11.bb19_crit_edge, label %bb14
bb11.bb19_crit_edge:
%split = phi i32 [ %tmp2.02, %bb14 ]
br label %bb19
bb19:
%tmp1.2.lcssa = phi i32 [ %split, %bb11.bb19_crit_edge ], [ %tmp1.1, %bb11.preheader ]
%tmp21 = icmp eq i32 %tmp1.2.lcssa, 0
br i1 %tmp21, label %bb23, label %bb7
bb23:
%tmp1.3 = phi i32 [ %tmp1.2.lcssa, %bb19 ], [ %tmp1.1, %bb7 ]
br label %bb3
}
; A test reduced out of 400.perlbench that when unswitching the `%stop`
; condition clones a loop nest outside of a containing loop. This excercises a
; different cloning path from our other test cases and in turn verifying the
; resulting structure can catch any failures to correctly clone these nested
; loops.
declare void @f()
declare void @g()
declare i32 @h(i32 %arg)
define void @test22(i32 %arg) {
; CHECK-LABEL: define void @test22(
entry:
br label %loop1.header
loop1.header:
%stop = phi i1 [ true, %loop1.latch ], [ false, %entry ]
%i = phi i32 [ %i.lcssa, %loop1.latch ], [ %arg, %entry ]
; CHECK: %[[I:.*]] = phi i32 [ %{{.*}}, %loop1.latch ], [ %arg, %entry ]
br i1 %stop, label %loop1.exit, label %loop1.body.loop2.ph
; CHECK: br i1 %stop, label %loop1.exit, label %loop1.body.loop2.ph
loop1.body.loop2.ph:
br label %loop2.header
; Just check that the we unswitched the key condition and that leads to the
; inner loop header.
;
; CHECK: loop1.body.loop2.ph:
; CHECK-NEXT: br i1 %stop, label %[[SPLIT_US:.*]], label %[[SPLIT:.*]]
;
; CHECK: [[SPLIT_US]]:
; CHECK-NEXT: br label %[[LOOP2_HEADER_US:.*]]
;
; CHECK: [[LOOP2_HEADER_US]]:
; CHECK-NEXT: %{{.*}} = phi i32 [ %[[I]], %[[SPLIT_US]] ]
;
; CHECK: [[SPLIT]]:
; CHECK-NEXT: br label %[[LOOP2_HEADER:.*]]
;
; CHECK: [[LOOP2_HEADER]]:
; CHECK-NEXT: %{{.*}} = phi i32 [ %[[I]], %[[SPLIT]] ]
loop2.header:
%i.inner = phi i32 [ %i, %loop1.body.loop2.ph ], [ %i.next, %loop2.latch ]
br label %loop3.header
loop3.header:
%sw = call i32 @h(i32 %i.inner)
switch i32 %sw, label %loop3.exit [
i32 32, label %loop3.header
i32 59, label %loop2.latch
i32 36, label %loop1.latch
]
loop2.latch:
%i.next = add i32 %i.inner, 1
br i1 %stop, label %loop2.exit, label %loop2.header
loop1.latch:
%i.lcssa = phi i32 [ %i.inner, %loop3.header ]
br label %loop1.header
loop3.exit:
call void @f()
ret void
loop2.exit:
call void @g()
ret void
loop1.exit:
call void @g()
ret void
}
; Test that when we are unswitching and need to rebuild the loop block set we
; correctly skip past inner loops. We want to use the inner loop to efficiently
; skip whole subregions of the outer loop blocks but just because the header of
; the outer loop is also the preheader of an inner loop shouldn't confuse this
; walk.
define void @test23(i1 %arg, i1* %ptr) {
; CHECK-LABEL: define void @test23(
entry:
br label %outer.header
; CHECK: entry:
; CHECK-NEXT: br i1 %arg,
;
; Just verify that we unswitched the correct bits. We should call `@f` twice in
; one unswitch and `@f` and then `@g` in the other.
; CHECK: call void
; CHECK-SAME: @f
; CHECK: call void
; CHECK-SAME: @f
;
; CHECK: call void
; CHECK-SAME: @f
; CHECK: call void
; CHECK-SAME: @g
outer.header:
br label %inner.header
inner.header:
call void @f()
br label %inner.latch
inner.latch:
%inner.cond = load i1, i1* %ptr
br i1 %inner.cond, label %inner.header, label %outer.body
outer.body:
br i1 %arg, label %outer.body.left, label %outer.body.right
outer.body.left:
call void @f()
br label %outer.latch
outer.body.right:
call void @g()
br label %outer.latch
outer.latch:
%outer.cond = load i1, i1* %ptr
br i1 %outer.cond, label %outer.header, label %exit
exit:
ret void
}
; Non-trivial loop unswitching where there are two invariant conditions, but the
; second one is only in the cloned copy of the loop after unswitching.
define i32 @test24(i1* %ptr, i1 %cond1, i1 %cond2) {
; CHECK-LABEL: @test24(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond1, label %entry.split.us, label %entry.split
loop_begin:
br i1 %cond1, label %loop_a, label %loop_b
loop_a:
br i1 %cond2, label %loop_a_a, label %loop_a_c
; The second unswitched condition.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br i1 %cond2, label %entry.split.us.split.us, label %entry.split.us.split
loop_a_a:
call i32 @a()
br label %latch
; The 'loop_a_a' unswitched loop.
;
; CHECK: entry.split.us.split.us:
; CHECK-NEXT: br label %loop_begin.us.us
;
; CHECK: loop_begin.us.us:
; CHECK-NEXT: br label %loop_a.us.us
;
; CHECK: loop_a.us.us:
; CHECK-NEXT: br label %loop_a_a.us.us
;
; CHECK: loop_a_a.us.us:
; CHECK-NEXT: call i32 @a()
; CHECK-NEXT: br label %latch.us.us
;
; CHECK: latch.us.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin.us.us, label %loop_exit.split.us.split.us
;
; CHECK: loop_exit.split.us.split.us:
; CHECK-NEXT: br label %loop_exit.split
loop_a_c:
call i32 @c()
br label %latch
; The 'loop_a_c' unswitched loop.
;
; CHECK: entry.split.us.split:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: br label %loop_a.us
;
; CHECK: loop_a.us:
; CHECK-NEXT: br label %loop_a_c.us
;
; CHECK: loop_a_c.us:
; CHECK-NEXT: call i32 @c()
; CHECK-NEXT: br label %latch
;
; CHECK: latch.us:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin.us, label %loop_exit.split.us.split
;
; CHECK: loop_exit.split.us.split:
; CHECK-NEXT: br label %loop_exit.split
loop_b:
call i32 @b()
br label %latch
; The 'loop_b' unswitched loop.
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: br label %loop_b
;
; CHECK: loop_b:
; CHECK-NEXT: call i32 @b()
; CHECK-NEXT: br label %latch
;
; CHECK: latch:
; CHECK-NEXT: %[[V:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V]], label %loop_begin, label %loop_exit.split
;
; CHECK: loop_exit.split:
; CHECK-NEXT: br label %loop_exit
latch:
%v = load i1, i1* %ptr
br i1 %v, label %loop_begin, label %loop_exit
loop_exit:
ret i32 0
; CHECK: loop_exit:
; CHECK-NEXT: ret
}
; Non-trivial partial loop unswitching of an invariant input to an 'or'.
define i32 @test25(i1* %ptr, i1 %cond) {
; CHECK-LABEL: @test25(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: br i1 %cond, label %entry.split.us, label %entry.split
loop_begin:
%v1 = load i1, i1* %ptr
%cond_or = or i1 %v1, %cond
br i1 %cond_or, label %loop_a, label %loop_b
loop_a:
call i32 @a()
br label %latch
; The 'loop_a' unswitched loop.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: %[[V1_US:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[OR_US:.*]] = or i1 %[[V1_US]], true
; CHECK-NEXT: br label %loop_a.us
;
; CHECK: loop_a.us:
; CHECK-NEXT: call i32 @a()
; CHECK-NEXT: br label %latch.us
;
; CHECK: latch.us:
; CHECK-NEXT: %[[V2_US:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V2_US]], label %loop_begin.us, label %loop_exit.split.us
;
; CHECK: loop_exit.split.us:
; CHECK-NEXT: br label %loop_exit
loop_b:
call i32 @b()
br label %latch
; The original loop.
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[V1:.*]] = load i1, i1* %ptr
; CHECK-NEXT: %[[OR:.*]] = or i1 %[[V1]], false
; CHECK-NEXT: br i1 %[[OR]], label %loop_a, label %loop_b
;
; CHECK: loop_a:
; CHECK-NEXT: call i32 @a()
; CHECK-NEXT: br label %latch
;
; CHECK: loop_b:
; CHECK-NEXT: call i32 @b()
; CHECK-NEXT: br label %latch
latch:
%v2 = load i1, i1* %ptr
br i1 %v2, label %loop_begin, label %loop_exit
; CHECK: latch:
; CHECK-NEXT: %[[V2:.*]] = load i1, i1* %ptr
; CHECK-NEXT: br i1 %[[V2]], label %loop_begin, label %loop_exit.split
loop_exit:
ret i32 0
; CHECK: loop_exit.split:
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit:
; CHECK-NEXT: ret
}
; Non-trivial partial loop unswitching of multiple invariant inputs to an `and`
; chain.
define i32 @test26(i1* %ptr1, i1* %ptr2, i1* %ptr3, i1 %cond1, i1 %cond2, i1 %cond3) {
; CHECK-LABEL: @test26(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: %[[INV_AND:.*]] = and i1 %cond3, %cond1
; CHECK-NEXT: br i1 %[[INV_AND]], label %entry.split, label %entry.split.us
loop_begin:
%v1 = load i1, i1* %ptr1
%v2 = load i1, i1* %ptr2
%cond_and1 = and i1 %v1, %cond1
%cond_or1 = or i1 %v2, %cond2
%cond_and2 = and i1 %cond_and1, %cond_or1
%cond_and3 = and i1 %cond_and2, %cond3
br i1 %cond_and3, label %loop_a, label %loop_b
; The 'loop_b' unswitched loop.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: %[[V1_US:.*]] = load i1, i1* %ptr1
; CHECK-NEXT: %[[V2_US:.*]] = load i1, i1* %ptr2
; CHECK-NEXT: %[[AND1_US:.*]] = and i1 %[[V1_US]], %cond1
; CHECK-NEXT: %[[OR1_US:.*]] = or i1 %[[V2_US]], %cond2
; CHECK-NEXT: %[[AND2_US:.*]] = and i1 %[[AND1_US]], %[[OR1_US]]
; CHECK-NEXT: %[[AND3_US:.*]] = and i1 %[[AND2_US]], %cond3
; CHECK-NEXT: br label %loop_b.us
;
; CHECK: loop_b.us:
; CHECK-NEXT: call i32 @b()
; CHECK-NEXT: br label %latch.us
;
; CHECK: latch.us:
; CHECK-NEXT: %[[V3_US:.*]] = load i1, i1* %ptr3
; CHECK-NEXT: br i1 %[[V3_US]], label %loop_begin.us, label %loop_exit.split.us
;
; CHECK: loop_exit.split.us:
; CHECK-NEXT: br label %loop_exit
; The original loop.
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[V1:.*]] = load i1, i1* %ptr1
; CHECK-NEXT: %[[V2:.*]] = load i1, i1* %ptr2
; CHECK-NEXT: %[[AND1:.*]] = and i1 %[[V1]], true
; CHECK-NEXT: %[[OR1:.*]] = or i1 %[[V2]], %cond2
; CHECK-NEXT: %[[AND2:.*]] = and i1 %[[AND1]], %[[OR1]]
; CHECK-NEXT: %[[AND3:.*]] = and i1 %[[AND2]], true
; CHECK-NEXT: br i1 %[[AND3]], label %loop_a, label %loop_b
loop_a:
call i32 @a()
br label %latch
; CHECK: loop_a:
; CHECK-NEXT: call i32 @a()
; CHECK-NEXT: br label %latch
loop_b:
call i32 @b()
br label %latch
; CHECK: loop_b:
; CHECK-NEXT: call i32 @b()
; CHECK-NEXT: br label %latch
latch:
%v3 = load i1, i1* %ptr3
br i1 %v3, label %loop_begin, label %loop_exit
; CHECK: latch:
; CHECK-NEXT: %[[V3:.*]] = load i1, i1* %ptr3
; CHECK-NEXT: br i1 %[[V3]], label %loop_begin, label %loop_exit.split
loop_exit:
ret i32 0
; CHECK: loop_exit.split:
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit:
; CHECK-NEXT: ret
}
; Non-trivial partial loop unswitching of multiple invariant inputs to an `or`
; chain. Basically an inverted version of corresponding `and` test (test26).
define i32 @test27(i1* %ptr1, i1* %ptr2, i1* %ptr3, i1 %cond1, i1 %cond2, i1 %cond3) {
; CHECK-LABEL: @test27(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: %[[INV_OR:.*]] = or i1 %cond3, %cond1
; CHECK-NEXT: br i1 %[[INV_OR]], label %entry.split.us, label %entry.split
loop_begin:
%v1 = load i1, i1* %ptr1
%v2 = load i1, i1* %ptr2
%cond_or1 = or i1 %v1, %cond1
%cond_and1 = and i1 %v2, %cond2
%cond_or2 = or i1 %cond_or1, %cond_and1
%cond_or3 = or i1 %cond_or2, %cond3
br i1 %cond_or3, label %loop_b, label %loop_a
; The 'loop_b' unswitched loop.
;
; CHECK: entry.split.us:
; CHECK-NEXT: br label %loop_begin.us
;
; CHECK: loop_begin.us:
; CHECK-NEXT: %[[V1_US:.*]] = load i1, i1* %ptr1
; CHECK-NEXT: %[[V2_US:.*]] = load i1, i1* %ptr2
; CHECK-NEXT: %[[OR1_US:.*]] = or i1 %[[V1_US]], %cond1
; CHECK-NEXT: %[[AND1_US:.*]] = and i1 %[[V2_US]], %cond2
; CHECK-NEXT: %[[OR2_US:.*]] = or i1 %[[OR1_US]], %[[AND1_US]]
; CHECK-NEXT: %[[OR3_US:.*]] = or i1 %[[OR2_US]], %cond3
; CHECK-NEXT: br label %loop_b.us
;
; CHECK: loop_b.us:
; CHECK-NEXT: call i32 @b()
; CHECK-NEXT: br label %latch.us
;
; CHECK: latch.us:
; CHECK-NEXT: %[[V3_US:.*]] = load i1, i1* %ptr3
; CHECK-NEXT: br i1 %[[V3_US]], label %loop_begin.us, label %loop_exit.split.us
;
; CHECK: loop_exit.split.us:
; CHECK-NEXT: br label %loop_exit
; The original loop.
;
; CHECK: entry.split:
; CHECK-NEXT: br label %loop_begin
;
; CHECK: loop_begin:
; CHECK-NEXT: %[[V1:.*]] = load i1, i1* %ptr1
; CHECK-NEXT: %[[V2:.*]] = load i1, i1* %ptr2
; CHECK-NEXT: %[[OR1:.*]] = or i1 %[[V1]], false
; CHECK-NEXT: %[[AND1:.*]] = and i1 %[[V2]], %cond2
; CHECK-NEXT: %[[OR2:.*]] = or i1 %[[OR1]], %[[AND1]]
; CHECK-NEXT: %[[OR3:.*]] = or i1 %[[OR2]], false
; CHECK-NEXT: br i1 %[[OR3]], label %loop_b, label %loop_a
loop_a:
call i32 @a()
br label %latch
; CHECK: loop_a:
; CHECK-NEXT: call i32 @a()
; CHECK-NEXT: br label %latch
loop_b:
call i32 @b()
br label %latch
; CHECK: loop_b:
; CHECK-NEXT: call i32 @b()
; CHECK-NEXT: br label %latch
latch:
%v3 = load i1, i1* %ptr3
br i1 %v3, label %loop_begin, label %loop_exit
; CHECK: latch:
; CHECK-NEXT: %[[V3:.*]] = load i1, i1* %ptr3
; CHECK-NEXT: br i1 %[[V3]], label %loop_begin, label %loop_exit.split
loop_exit:
ret i32 0
; CHECK: loop_exit.split:
; CHECK-NEXT: br label %loop_exit
;
; CHECK: loop_exit:
; CHECK-NEXT: ret
}
; Non-trivial unswitching of a switch.
define i32 @test28(i1* %ptr, i32 %cond) {
; CHECK-LABEL: @test28(
entry:
br label %loop_begin
; CHECK-NEXT: entry:
; CHECK-NEXT: switch i32 %cond, label %[[ENTRY_SPLIT_LATCH:.*]] [
; CHECK-NEXT: i32 0, label %[[ENTRY_SPLIT_A:.*]]
; CHECK-NEXT: i32 1, label %[[ENTRY_SPLIT_B:.*]]
; CHECK-NEXT: i32 2, label %[[ENTRY_SPLIT_C:.*]]
; CHECK-NEXT: ]
loop_begin:
switch i32 %cond, label %latch [
i32 0, label %loop_a
i32 1, label %loop_b
i32 2, label %loop_c
]
loop_a:
call i32 @a()
br label %latch
; Unswitched 'a' loop.
;
; CHECK: [[ENTRY_SPLIT_A]]:
; CHECK-NEXT: br label %[[LOOP_BEGIN_A:.*]]
;
; CHECK: [[LOOP_BEGIN_A]]:
; CHECK-NEXT: br label %[[LOOP_A:.*]]
;
; CHECK: [[LOOP_A]]:
; CHECK-NEXT: call i32 @a()
; CHECK-NEXT: br label %[[LOOP_LATCH_A:.*]]
;
; CHECK: [[LOOP_LATCH_A]]:
; CHECK-NEXT: %[[V_A:.*]] = load i1, i1* %ptr
; CHECK: br i1 %[[V_A]], label %[[LOOP_BEGIN_A]], label %[[LOOP_EXIT_A:.*]]
;
; CHECK: [[LOOP_EXIT_A]]:
; CHECK-NEXT: br label %loop_exit
loop_b:
call i32 @b()
br label %latch
; Unswitched 'b' loop.
;
; CHECK: [[ENTRY_SPLIT_B]]:
; CHECK-NEXT: br label %[[LOOP_BEGIN_B:.*]]
;
; CHECK: [[LOOP_BEGIN_B]]:
; CHECK-NEXT: br label %[[LOOP_B:.*]]
;
; CHECK: [[LOOP_B]]:
; CHECK-NEXT: call i32 @b()
; CHECK-NEXT: br label %[[LOOP_LATCH_B:.*]]
;
; CHECK: [[LOOP_LATCH_B]]:
; CHECK-NEXT: %[[V_B:.*]] = load i1, i1* %ptr
; CHECK: br i1 %[[V_B]], label %[[LOOP_BEGIN_B]], label %[[LOOP_EXIT_B:.*]]
;
; CHECK: [[LOOP_EXIT_B]]:
; CHECK-NEXT: br label %loop_exit
loop_c:
call i32 @c()
br label %latch
; Unswitched 'c' loop.
;
; CHECK: [[ENTRY_SPLIT_C]]:
; CHECK-NEXT: br label %[[LOOP_BEGIN_C:.*]]
;
; CHECK: [[LOOP_BEGIN_C]]:
; CHECK-NEXT: br label %[[LOOP_C:.*]]
;
; CHECK: [[LOOP_C]]:
; CHECK-NEXT: call i32 @c()
; CHECK-NEXT: br label %[[LOOP_LATCH_C:.*]]
;
; CHECK: [[LOOP_LATCH_C]]:
; CHECK-NEXT: %[[V_C:.*]] = load i1, i1* %ptr
; CHECK: br i1 %[[V_C]], label %[[LOOP_BEGIN_C]], label %[[LOOP_EXIT_C:.*]]
;
; CHECK: [[LOOP_EXIT_C]]:
; CHECK-NEXT: br label %loop_exit
latch:
%v = load i1, i1* %ptr
br i1 %v, label %loop_begin, label %loop_exit
; Unswitched the 'latch' only loop.
;
; CHECK: [[ENTRY_SPLIT_LATCH]]:
; CHECK-NEXT: br label %[[LOOP_BEGIN_LATCH:.*]]
;
; CHECK: [[LOOP_BEGIN_LATCH]]:
; CHECK-NEXT: br label %[[LOOP_LATCH_LATCH:.*]]
;
; CHECK: [[LOOP_LATCH_LATCH]]:
; CHECK-NEXT: %[[V_LATCH:.*]] = load i1, i1* %ptr
; CHECK: br i1 %[[V_LATCH]], label %[[LOOP_BEGIN_LATCH]], label %[[LOOP_EXIT_LATCH:.*]]
;
; CHECK: [[LOOP_EXIT_LATCH]]:
; CHECK-NEXT: br label %loop_exit
loop_exit:
ret i32 0
; CHECK: loop_exit:
; CHECK-NEXT: ret i32 0
}
; A test case designed to exercise unusual properties of switches: they
; can introduce multiple edges to successors. These need lots of special case
; handling as they get collapsed in many cases (domtree, the unswitch itself)
; but not in all cases (the PHI node operands).
define i32 @test29(i32 %arg) {
; CHECK-LABEL: @test29(
entry:
br label %header
; CHECK-NEXT: entry:
; CHECK-NEXT: switch i32 %arg, label %[[ENTRY_SPLIT_C:.*]] [
; CHECK-NEXT: i32 0, label %[[ENTRY_SPLIT_A:.*]]
; CHECK-NEXT: i32 1, label %[[ENTRY_SPLIT_A]]
; CHECK-NEXT: i32 2, label %[[ENTRY_SPLIT_B:.*]]
; CHECK-NEXT: i32 3, label %[[ENTRY_SPLIT_C]]
; CHECK-NEXT: ]
header:
%tmp = call i32 @d()
%cmp1 = icmp eq i32 %tmp, 0
; We set up a chain through all the successors of the switch that doesn't
; involve the switch so that we can have interesting PHI nodes in them.
br i1 %cmp1, label %body.a, label %dispatch
dispatch:
; Switch with multiple successors. We arrange the last successor to be the
; default to make the test case easier to read. This has a duplicate edge
; both to the default destination (which is completely superfluous but
; technically valid IR) and to a regular successor.
switch i32 %arg, label %body.c [
i32 0, label %body.a
i32 1, label %body.a
i32 2, label %body.b
i32 3, label %body.c
]
body.a:
%tmp.a.phi = phi i32 [ 0, %header ], [ %tmp, %dispatch ], [ %tmp, %dispatch ]
%tmp.a = call i32 @a()
%tmp.a.sum = add i32 %tmp.a.phi, %tmp.a
br label %body.b
; Unswitched 'a' loop.
;
; CHECK: [[ENTRY_SPLIT_A]]:
; CHECK-NEXT: br label %[[HEADER_A:.*]]
;
; CHECK: [[HEADER_A]]:
; CHECK-NEXT: %[[TMP_A:.*]] = call i32 @d()
; CHECK-NEXT: %[[CMP1_A:.*]] = icmp eq i32 %[[TMP_A]], 0
; CHECK-NEXT: br i1 %[[CMP1_A]], label %[[BODY_A_A:.*]], label %[[DISPATCH_A:.*]]
;
; CHECK: [[DISPATCH_A]]:
; CHECK-NEXT: br label %[[BODY_A_A]]
;
; CHECK: [[BODY_A_A]]:
; CHECK-NEXT: %[[TMP_A_PHI_A:.*]] = phi i32 [ 0, %[[HEADER_A]] ], [ %[[TMP_A]], %[[DISPATCH_A]] ]
; CHECK-NEXT: %[[TMP_A_A:.*]] = call i32 @a()
; CHECK-NEXT: %[[TMP_A_SUM_A:.*]] = add i32 %[[TMP_A_PHI_A]], %[[TMP_A_A]]
; CHECK-NEXT: br label %[[BODY_B_A:.*]]
;
; CHECK: [[BODY_B_A]]:
; CHECK-NEXT: %[[TMP_B_PHI_A:.*]] = phi i32 [ %[[TMP_A_SUM_A]], %[[BODY_A_A]] ]
; CHECK-NEXT: %[[TMP_B_A:.*]] = call i32 @b()
; CHECK-NEXT: %[[TMP_B_SUM_A:.*]] = add i32 %[[TMP_B_PHI_A]], %[[TMP_B_A]]
; CHECK-NEXT: br label %[[BODY_C_A:.*]]
;
; CHECK: [[BODY_C_A]]:
; CHECK-NEXT: %[[TMP_C_PHI_A:.*]] = phi i32 [ %[[TMP_B_SUM_A]], %[[BODY_B_A]] ]
; CHECK-NEXT: %[[TMP_C_A:.*]] = call i32 @c()
; CHECK-NEXT: %[[TMP_C_SUM_A:.*]] = add i32 %[[TMP_C_PHI_A]], %[[TMP_C_A]]
; CHECK-NEXT: br label %[[LATCH_A:.*]]
;
; CHECK: [[LATCH_A]]:
; CHECK-NEXT: %[[CMP2_A:.*]] = icmp slt i32 %[[TMP_C_SUM_A]], 42
; CHECK: br i1 %[[CMP2_A]], label %[[HEADER_A]], label %[[LOOP_EXIT_A:.*]]
;
; CHECK: [[LOOP_EXIT_A]]:
; CHECK-NEXT: %[[LCSSA_A:.*]] = phi i32 [ %[[TMP_C_SUM_A]], %[[LATCH_A]] ]
; CHECK-NEXT: br label %exit
body.b:
%tmp.b.phi = phi i32 [ %tmp, %dispatch ], [ %tmp.a.sum, %body.a ]
%tmp.b = call i32 @b()
%tmp.b.sum = add i32 %tmp.b.phi, %tmp.b
br label %body.c
; Unswitched 'b' loop.
;
; CHECK: [[ENTRY_SPLIT_B]]:
; CHECK-NEXT: br label %[[HEADER_B:.*]]
;
; CHECK: [[HEADER_B]]:
; CHECK-NEXT: %[[TMP_B:.*]] = call i32 @d()
; CHECK-NEXT: %[[CMP1_B:.*]] = icmp eq i32 %[[TMP_B]], 0
; CHECK-NEXT: br i1 %[[CMP1_B]], label %[[BODY_A_B:.*]], label %[[DISPATCH_B:.*]]
;
; CHECK: [[DISPATCH_B]]:
; CHECK-NEXT: br label %[[BODY_B_B:.*]]
;
; CHECK: [[BODY_A_B]]:
; CHECK-NEXT: %[[TMP_A_PHI_B:.*]] = phi i32 [ 0, %[[HEADER_B]] ]
; CHECK-NEXT: %[[TMP_A_B:.*]] = call i32 @a()
; CHECK-NEXT: %[[TMP_A_SUM_B:.*]] = add i32 %[[TMP_A_PHI_B]], %[[TMP_A_B]]
; CHECK-NEXT: br label %[[BODY_B_B:.*]]
;
; CHECK: [[BODY_B_B]]:
; CHECK-NEXT: %[[TMP_B_PHI_B:.*]] = phi i32 [ %[[TMP_B]], %[[DISPATCH_B]] ], [ %[[TMP_A_SUM_B]], %[[BODY_A_B]] ]
; CHECK-NEXT: %[[TMP_B_B:.*]] = call i32 @b()
; CHECK-NEXT: %[[TMP_B_SUM_B:.*]] = add i32 %[[TMP_B_PHI_B]], %[[TMP_B_B]]
; CHECK-NEXT: br label %[[BODY_C_B:.*]]
;
; CHECK: [[BODY_C_B]]:
; CHECK-NEXT: %[[TMP_C_PHI_B:.*]] = phi i32 [ %[[TMP_B_SUM_B]], %[[BODY_B_B]] ]
; CHECK-NEXT: %[[TMP_C_B:.*]] = call i32 @c()
; CHECK-NEXT: %[[TMP_C_SUM_B:.*]] = add i32 %[[TMP_C_PHI_B]], %[[TMP_C_B]]
; CHECK-NEXT: br label %[[LATCH_B:.*]]
;
; CHECK: [[LATCH_B]]:
; CHECK-NEXT: %[[CMP2_B:.*]] = icmp slt i32 %[[TMP_C_SUM_B]], 42
; CHECK: br i1 %[[CMP2_B]], label %[[HEADER_B]], label %[[LOOP_EXIT_B:.*]]
;
; CHECK: [[LOOP_EXIT_B]]:
; CHECK-NEXT: %[[LCSSA_B:.*]] = phi i32 [ %[[TMP_C_SUM_B]], %[[LATCH_B]] ]
; CHECK-NEXT: br label %[[EXIT_SPLIT:.*]]
body.c:
%tmp.c.phi = phi i32 [ %tmp, %dispatch ], [ %tmp, %dispatch ], [ %tmp.b.sum, %body.b ]
%tmp.c = call i32 @c()
%tmp.c.sum = add i32 %tmp.c.phi, %tmp.c