# 2014 October 30
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
set testprefix e_blobopen

forcedelete test.db2

do_execsql_test 1.0 {
  ATTACH 'test.db2' AS aux;

  CREATE TABLE main.t1(a INTEGER PRIMARY KEY, b TEXT, c BLOB);
  CREATE TEMP TABLE t1(a INTEGER PRIMARY KEY, b TEXT, c BLOB);
  CREATE TABLE aux.t1(a INTEGER PRIMARY KEY, b TEXT, c BLOB);

  CREATE TABLE main.x1(a INTEGER PRIMARY KEY, b TEXT, c BLOB);
  CREATE TEMP TABLE x2(a INTEGER PRIMARY KEY, b TEXT, c BLOB);
  CREATE TABLE aux.x3(a INTEGER PRIMARY KEY, b TEXT, c BLOB);

  INSERT INTO main.t1 VALUES(1, 'main one', X'0101');
  INSERT INTO main.t1 VALUES(2, 'main two', X'0102');
  INSERT INTO main.t1 VALUES(3, 'main three', X'0103');
  INSERT INTO main.t1 VALUES(4, 'main four', X'0104');
  INSERT INTO main.t1 VALUES(5, 'main five', X'0105');

  INSERT INTO main.x1 VALUES(1, 'x main one', X'000101');
  INSERT INTO main.x1 VALUES(2, 'x main two', X'000102');
  INSERT INTO main.x1 VALUES(3, 'x main three', X'000103');
  INSERT INTO main.x1 VALUES(4, 'x main four', X'000104');
  INSERT INTO main.x1 VALUES(5, 'x main five', X'000105');

  INSERT INTO temp.t1 VALUES(1, 'temp one', X'0201');
  INSERT INTO temp.t1 VALUES(2, 'temp two', X'0202');
  INSERT INTO temp.t1 VALUES(3, 'temp three', X'0203');
  INSERT INTO temp.t1 VALUES(4, 'temp four', X'0204');
  INSERT INTO temp.t1 VALUES(5, 'temp five', X'0205');

  INSERT INTO temp.x2 VALUES(1, 'x temp one', X'000201');
  INSERT INTO temp.x2 VALUES(2, 'x temp two', X'000202');
  INSERT INTO temp.x2 VALUES(3, 'x temp three', X'000203');
  INSERT INTO temp.x2 VALUES(4, 'x temp four', X'000204');
  INSERT INTO temp.x2 VALUES(5, 'x temp five', X'000205');

  INSERT INTO aux.t1 VALUES(1, 'aux one', X'0301');
  INSERT INTO aux.t1 VALUES(2, 'aux two', X'0302');
  INSERT INTO aux.t1 VALUES(3, 'aux three', X'0303');
  INSERT INTO aux.t1 VALUES(4, 'aux four', X'0304');
  INSERT INTO aux.t1 VALUES(5, 'aux five', X'0305');

  INSERT INTO aux.x3 VALUES(1, 'x aux one', X'000301');
  INSERT INTO aux.x3 VALUES(2, 'x aux two', X'000302');
  INSERT INTO aux.x3 VALUES(3, 'x aux three', X'000303');
  INSERT INTO aux.x3 VALUES(4, 'x aux four', X'000304');
  INSERT INTO aux.x3 VALUES(5, 'x aux five', X'000305');
}

#-------------------------------------------------------------------------
# EVIDENCE-OF: R-37639-55938 This interfaces opens a handle to the BLOB
# located in row iRow, column zColumn, table zTable in database zDb; in
# other words, the same BLOB that would be selected by: SELECT zColumn
# FROM zDb.zTable WHERE rowid = iRow;
#
proc read_blob {zDb zTab zCol iRow} {
  sqlite3_blob_open db $zDb $zTab $zCol $iRow 0 B
  set nByte [sqlite3_blob_bytes $B]
  set data [sqlite3_blob_read $B 0 $nByte]
  sqlite3_blob_close $B
  return $data
}

do_test 1.1.1 { read_blob main t1 b 1 } "main one"
do_test 1.1.2 { read_blob main t1 c 1 } "\01\01"
do_test 1.1.3 { read_blob temp t1 b 1 } "temp one"
do_test 1.1.4 { read_blob temp t1 c 1 } "\02\01"
do_test 1.1.6 { read_blob aux  t1 b 1 } "aux one"
do_test 1.1.7 { read_blob aux  t1 c 1 } "\03\01"

do_test 1.2.1 { read_blob main t1 b 4 } "main four"
do_test 1.2.2 { read_blob main t1 c 4 } "\01\04"
do_test 1.2.3 { read_blob temp t1 b 4 } "temp four"
do_test 1.2.4 { read_blob temp t1 c 4 } "\02\04"
do_test 1.2.6 { read_blob aux  t1 b 4 } "aux four"
do_test 1.2.7 { read_blob aux  t1 c 4 } "\03\04"

do_test 1.3.1 { read_blob main x1 b 2 } "x main two"
do_test 1.3.2 { read_blob main x1 c 2 } "\00\01\02"
do_test 1.3.3 { read_blob temp x2 b 2 } "x temp two"
do_test 1.3.4 { read_blob temp x2 c 2 } "\00\02\02"
do_test 1.3.6 { read_blob aux  x3 b 2 } "x aux two"
do_test 1.3.7 { read_blob aux  x3 c 2 } "\00\03\02"

#-------------------------------------------------------------------------
# EVIDENCE-OF: R-27234-05761 Parameter zDb is not the filename that
# contains the database, but rather the symbolic name of the database.
# For attached databases, this is the name that appears after the AS
# keyword in the ATTACH statement. For the main database file, the
# database name is "main". For TEMP tables, the database name is "temp".
#
#   The test cases immediately above demonstrate that the database name
#   for the main db, for TEMP tables and for those in attached databases
#   is correct. The following tests check that filenames cannot be
#   used as well.
#
do_test 2.1 {
  list [catch { sqlite3_blob_open db "test.db" t1 b 1 0 B } msg] $msg
} {1 SQLITE_ERROR}
do_test 2.2 {
  list [catch { sqlite3_blob_open db "test.db2" t1 b 1 0 B } msg] $msg
} {1 SQLITE_ERROR}

#-------------------------------------------------------------------------
# EVIDENCE-OF: R-50854-53979 If the flags parameter is non-zero, then
# the BLOB is opened for read and write access.
#
# EVIDENCE-OF: R-03922-41160 If the flags parameter is zero, the BLOB is
# opened for read-only access.
#
foreach {tn iRow flags} {
  1 1   0
  2 2   1
  3 3  -1
  4 4   2147483647
  5 5  -2147483648
} {
  do_test 3.$tn.1 {
    sqlite3_blob_open db main x1 c $iRow $flags B
    set n [sqlite3_blob_bytes $B]
    sqlite3_blob_read $B 0 $n
  } [binary format ccc 0 1 $iRow]

  if {$flags==0} {
    # Blob was opened for read-only access - writing returns an error.
    do_test 3.$tn.2 {
      list [catch { sqlite3_blob_write $B 0 xxx 3 } msg] $msg
    } {1 SQLITE_READONLY}

    do_execsql_test 3.$tn.3 {
      SELECT c FROM x1 WHERE a=$iRow;
    } [binary format ccc 0 1 $iRow]
  } else {
    # Blob was opened for read/write access - writing succeeds
    do_test 3.$tn.4 {
      list [catch { sqlite3_blob_write $B 0 xxx 3 } msg] $msg
    } {0 {}}

    do_execsql_test 3.$tn.5 {
      SELECT c FROM x1 WHERE a=$iRow;
    } {xxx}
  }

  sqlite3_blob_close $B
}

#-------------------------------------------------------------------------
#
reset_db
do_execsql_test 4.0 {
  CREATE TABLE t1(x, y);
  INSERT INTO t1 VALUES('abcd', 152);
  INSERT INTO t1 VALUES(NULL, X'00010203');
  INSERT INTO t1 VALUES('', 154.2);

  CREATE TABLE t2(x PRIMARY KEY, y) WITHOUT ROWID;
  INSERT INTO t2 VALUES(1, 'blob');

  CREATE TABLE t3(a PRIMARY KEY, b, c, d, e, f, UNIQUE(e, f));
  INSERT INTO t3 VALUES('aaaa', 'bbbb', 'cccc', 'dddd', 'eeee', 'ffff');
  CREATE INDEX t3b ON t3(b);

  CREATE TABLE p1(x PRIMARY KEY);
  INSERT INTO p1 VALUES('abc');

  CREATE TABLE c1(a INTEGER PRIMARY KEY, b REFERENCES p1);
  INSERT INTO c1 VALUES(45, 'abc');
}

proc test_blob_open {tn zDb zTab zCol iRow flags    errcode errmsg} {
  global B
  set B "0x1234"

  if {$errcode=="SQLITE_OK"} {
    set expected "0 {}"
  } else {
    set expected "1 $errcode"
  }

  set ::res [list [
    catch { sqlite3_blob_open db $zDb $zTab $zCol $iRow $flags B } msg
  ] $msg]
  do_test 4.$tn.1 { set ::res } $expected

  # EVIDENCE-OF: R-08940-21305 Unless it returns SQLITE_MISUSE, this
  # function sets the database connection error code and message
  # accessible via sqlite3_errcode() and sqlite3_errmsg() and related
  # functions.
  #
  #   This proc (test_blob_open) is used below to test various error and
  #   non-error conditions. But never SQLITE_MISUSE conditions. So these
  #   test cases are considered as partly verifying the requirement above.
  #   See below for a test of the SQLITE_MISUSE case.
  #
  do_test 4.$tn.2 {
    sqlite3_errcode db
  } $errcode
  do_test 4.$tn.3 {
    sqlite3_errmsg db
  } $errmsg

  # EVIDENCE-OF: R-31086-35521 On success, SQLITE_OK is returned and the
  # new BLOB handle is stored in *ppBlob. Otherwise an error code is
  # returned and, unless the error code is SQLITE_MISUSE, *ppBlob is set
  # to NULL.
  #
  do_test 4.$tn.4 {
    expr {$B == "0"}
  } [expr {$errcode != "SQLITE_OK"}]

  # EVIDENCE-OF: R-63421-15521 This means that, provided the API is not
  # misused, it is always safe to call sqlite3_blob_close() on *ppBlob
  # after this function it returns.
  do_test 4.$tn.5 {
    sqlite3_blob_close $B
  } {}
}

# EVIDENCE-OF: R-31204-44780 Database zDb does not exist
test_blob_open 1 nosuchdb t1 x 1 0 SQLITE_ERROR "no such table: nosuchdb.t1"

# EVIDENCE-OF: R-28676-08005 Table zTable does not exist within database zDb
test_blob_open 2 main tt1 x 1 0    SQLITE_ERROR "no such table: main.tt1"

# EVIDENCE-OF: R-40134-30296 Table zTable is a WITHOUT ROWID table
test_blob_open 3 main t2 y 1 0     SQLITE_ERROR \
    "cannot open table without rowid: t2"

# EVIDENCE-OF: R-56376-21261 Column zColumn does not exist
test_blob_open 4 main t1 z 2 0     SQLITE_ERROR "no such column: \"z\""

# EVIDENCE-OF: R-28258-23166 Row iRow is not present in the table
test_blob_open 5 main t1 y 6 0     SQLITE_ERROR "no such rowid: 6"

# EVIDENCE-OF: R-11683-62380 The specified column of row iRow contains a
# value that is not a TEXT or BLOB value
test_blob_open 6 main t1 x 2 0 SQLITE_ERROR "cannot open value of type null"
test_blob_open 7 main t1 y 1 0 SQLITE_ERROR "cannot open value of type integer"
test_blob_open 8 main t1 y 3 0 SQLITE_ERROR "cannot open value of type real"

# EVIDENCE-OF: R-34146-30782 Column zColumn is part of an index, PRIMARY
# KEY or UNIQUE constraint and the blob is being opened for read/write
# access
#
# Test cases 8.1.* show that such columns can be opened for read-access. 
# Tests 8.2.* show that read-write access is different. Columns "c" and "c"
# are not part of an index, PK or UNIQUE constraint, so they work in both
# cases.
#
test_blob_open 8.1.1 main t3 a 1 0 SQLITE_OK "not an error"
test_blob_open 8.1.2 main t3 b 1 0 SQLITE_OK "not an error"
test_blob_open 8.1.3 main t3 c 1 0 SQLITE_OK "not an error"
test_blob_open 8.1.4 main t3 d 1 0 SQLITE_OK "not an error"
test_blob_open 8.1.5 main t3 e 1 0 SQLITE_OK "not an error"
test_blob_open 8.1.6 main t3 f 1 0 SQLITE_OK "not an error"

set cannot "cannot open indexed column for writing"
test_blob_open 8.2.1 main t3 a 1 8 SQLITE_ERROR $cannot
test_blob_open 8.2.2 main t3 b 1 8 SQLITE_ERROR $cannot
test_blob_open 8.2.3 main t3 c 1 8 SQLITE_OK "not an error"
test_blob_open 8.2.4 main t3 d 1 8 SQLITE_OK "not an error"
test_blob_open 8.2.5 main t3 e 1 8 SQLITE_ERROR $cannot
test_blob_open 8.2.6 main t3 f 1 8 SQLITE_ERROR $cannot

# EVIDENCE-OF: R-50117-55204 Foreign key constraints are enabled, column
# zColumn is part of a child key definition and the blob is being opened
# for read/write access
#
#   9.1: FK disabled, read-only access.
#   9.2: FK disabled, read-only access.
#   9.3: FK enabled, read/write access.
#   9.4: FK enabled, read/write access.
#
test_blob_open 9.1 main c1 b 45 0 SQLITE_OK "not an error"
test_blob_open 9.2 main c1 b 45 1 SQLITE_OK "not an error"
execsql { PRAGMA foreign_keys = ON }
test_blob_open 9.3 main c1 b 45 0 SQLITE_OK "not an error"
test_blob_open 9.4 main c1 b 45 1 SQLITE_ERROR \
        "cannot open foreign key column for writing"

#-------------------------------------------------------------------------
# EVIDENCE-OF: R-08940-21305 Unless it returns SQLITE_MISUSE, this
# function sets the database connection error code and message
# accessible via sqlite3_errcode() and sqlite3_errmsg() and related
# functions.
#
#   This requirement is partially verified by the many uses of test
#   command [test_blob_open] above. All that is left is to verify the
#   SQLITE_MISUSE case.
#
#   SQLITE_MISUSE is only returned if SQLITE_ENABLE_API_ARMOR is defined
#   during compilation.
#
ifcapable api_armor {
  sqlite3_blob_open db main t1 x 1 0 B

  do_test 10.1.1 {
    list [catch {sqlite3_blob_open $B main t1 x 1 0 B2} msg] $msg
  } {1 SQLITE_MISUSE}
  do_test 10.1.2 {
    list [sqlite3_errcode db] [sqlite3_errmsg db]
  } {SQLITE_OK {not an error}}
  sqlite3_blob_close $B

  do_test 10.2.1 {
    list [catch {sqlite3_blob_open db main {} x 1 0 B} msg] $msg
  } {1 SQLITE_MISUSE}
  do_test 10.2.2 {
    list [sqlite3_errcode db] [sqlite3_errmsg db]
  } {SQLITE_OK {not an error}}
}

#-------------------------------------------------------------------------
# EVIDENCE-OF: R-50542-62589 If the row that a BLOB handle points to is
# modified by an UPDATE, DELETE, or by ON CONFLICT side-effects then the
# BLOB handle is marked as "expired". This is true if any column of the
# row is changed, even a column other than the one the BLOB handle is
# open on.
#
# EVIDENCE-OF: R-48367-20048 Calls to sqlite3_blob_read() and
# sqlite3_blob_write() for an expired BLOB handle fail with a return
# code of SQLITE_ABORT.
#
#   11.2: read-only handle, DELETE.
#   11.3: read-only handle, UPDATE.
#   11.4: read-only handle, REPLACE.
#   11.5: read/write handle, DELETE.
#   11.6: read/write handle, UPDATE.
#   11.7: read/write handle, REPLACE.
#
do_execsql_test 11.1 {
  CREATE TABLE b1(a INTEGER PRIMARY KEY, b, c UNIQUE);
  INSERT INTO b1 VALUES(1, '1234567890', 1);
  INSERT INTO b1 VALUES(2, '1234567890', 2);
  INSERT INTO b1 VALUES(3, '1234567890', 3);
  INSERT INTO b1 VALUES(4, '1234567890', 4);
  INSERT INTO b1 VALUES(5, '1234567890', 5);
  INSERT INTO b1 VALUES(6, '1234567890', 6);

  CREATE TABLE b2(a INTEGER PRIMARY KEY, b, c UNIQUE);
  INSERT INTO b2 VALUES(1, '1234567890', 1);
  INSERT INTO b2 VALUES(2, '1234567890', 2);
  INSERT INTO b2 VALUES(3, '1234567890', 3);
  INSERT INTO b2 VALUES(4, '1234567890', 4);
  INSERT INTO b2 VALUES(5, '1234567890', 5);
  INSERT INTO b2 VALUES(6, '1234567890', 6);
}

do_test 11.2.1 {
  sqlite3_blob_open db main b1 b 2 0 B
  sqlite3_blob_read $B 0 10
} {1234567890}
do_test 11.2.2 {
  # Deleting a different row does not invalidate the blob handle.
  execsql { DELETE FROM b1 WHERE a = 1 }
  sqlite3_blob_read $B 0 10
} {1234567890}
do_test 11.2.3 {
  execsql { DELETE FROM b1 WHERE a = 2 }
  list [catch { sqlite3_blob_read $B 0 10 } msg] $msg
} {1 SQLITE_ABORT}
do_test 11.2.4 {
  sqlite3_blob_close $B
} {}

do_test 11.3.1 {
  sqlite3_blob_open db main b1 b 3 0 B
  sqlite3_blob_read $B 0 10
} {1234567890}
do_test 11.3.2 {
  # Updating a different row
  execsql { UPDATE b1 SET c = 42 WHERE a=4 }
  sqlite3_blob_read $B 0 10
} {1234567890}
do_test 11.3.3 {
  execsql { UPDATE b1 SET c = 43 WHERE a=3 }
  list [catch { sqlite3_blob_read $B 0 10 } msg] $msg
} {1 SQLITE_ABORT}
do_test 11.3.4 {
  sqlite3_blob_close $B
} {}

do_test 11.4.1 {
  sqlite3_blob_open db main b1 b 6 0 B
  sqlite3_blob_read $B 0 10
} {1234567890}
do_test 11.4.2 {
  # Replace a different row
  execsql { INSERT OR REPLACE INTO b1 VALUES(10, 'abcdefghij', 5) }
  sqlite3_blob_read $B 0 10
} {1234567890}
do_test 11.4.3 {
  execsql { INSERT OR REPLACE INTO b1 VALUES(11, 'abcdefghij', 6) }
  list [catch { sqlite3_blob_read $B 0 10 } msg] $msg
} {1 SQLITE_ABORT}
do_test 11.4.4 {
  sqlite3_blob_close $B
} {}

do_test 11.4.1 {
  sqlite3_blob_open db main b2 b 2 1 B
  sqlite3_blob_write $B 0 "abcdefghij"
} {}
do_test 11.4.2 {
  # Deleting a different row does not invalidate the blob handle.
  execsql { DELETE FROM b2 WHERE a = 1 }
  sqlite3_blob_write $B 0 "ABCDEFGHIJ"
} {}
do_test 11.4.3 {
  execsql { DELETE FROM b2 WHERE a = 2 }
  list [catch { sqlite3_blob_write $B 0 "0987654321" } msg] $msg
} {1 SQLITE_ABORT}
do_test 11.4.4 {
  sqlite3_blob_close $B
} {}

do_test 11.5.1 {
  sqlite3_blob_open db main b2 b 3 1 B
  sqlite3_blob_write $B 0 "abcdefghij"
} {}
do_test 11.5.2 {
  # Updating a different row
  execsql { UPDATE b2 SET c = 42 WHERE a=4 }
  sqlite3_blob_write $B 0 "ABCDEFGHIJ"
} {}
do_test 11.5.3 {
  execsql { UPDATE b2 SET c = 43 WHERE a=3 }
  list [catch { sqlite3_blob_write $B 0 "0987654321" } msg] $msg
} {1 SQLITE_ABORT}
do_test 11.5.4 {
  sqlite3_blob_close $B
} {}

do_test 11.6.1 {
  sqlite3_blob_open db main b2 b 6 1 B
  sqlite3_blob_write $B 0 "abcdefghij"
} {}
do_test 11.6.2 {
  # Replace a different row
  execsql { INSERT OR REPLACE INTO b2 VALUES(10, 'abcdefghij', 5) }
  sqlite3_blob_write $B 0 "ABCDEFGHIJ"
} {}
do_test 11.6.3 {
  execsql { INSERT OR REPLACE INTO b2 VALUES(11, 'abcdefghij', 6) }
  list [catch { sqlite3_blob_write $B 0 "0987654321" } msg] $msg
} {1 SQLITE_ABORT}
do_test 11.6.4 {
  sqlite3_blob_close $B
} {}

#-------------------------------------------------------------------------
# EVIDENCE-OF: R-45408-40694 Changes written into a BLOB prior to the
# BLOB expiring are not rolled back by the expiration of the BLOB. Such
# changes will eventually commit if the transaction continues to
# completion.
#
do_execsql_test 12.1 {
  CREATE TABLE b3(x INTEGER PRIMARY KEY, y TEXT, z INTEGER);
  INSERT INTO b3 VALUES(22, '..........', NULL);
}
do_test 12.2 {
  sqlite3_blob_open db main b3 y 22 1 B
  sqlite3_blob_write $B 0 "xxxxx" 5
} {}
do_execsql_test 12.3 {
  UPDATE b3 SET z = 'not null';
}
do_test 12.4 {
  list [catch {sqlite3_blob_write $B 5 "xxxxx" 5} msg] $msg
} {1 SQLITE_ABORT}
do_execsql_test 12.5 {
  SELECT * FROM b3;
} {22 xxxxx..... {not null}}
do_test 12.5 {
  sqlite3_blob_close $B
} {}
do_execsql_test 12.6 {
  SELECT * FROM b3;
} {22 xxxxx..... {not null}}

#-------------------------------------------------------------------------
# EVIDENCE-OF: R-58813-55036 The sqlite3_bind_zeroblob() and
# sqlite3_result_zeroblob() interfaces and the built-in zeroblob SQL
# function may be used to create a zero-filled blob to read or write
# using the incremental-blob interface.
#
do_execsql_test 13.1 {
  CREATE TABLE c2(i INTEGER PRIMARY KEY, j);
  INSERT INTO c2 VALUES(10, zeroblob(24));
}

do_test 13.2 {
  set stmt [sqlite3_prepare_v2 db "INSERT INTO c2 VALUES(11, ?)" -1]
  sqlite3_bind_zeroblob $stmt 1 45
  sqlite3_step $stmt
  sqlite3_finalize $stmt
} {SQLITE_OK}

# The blobs can be read:
#
do_test 13.3.1 {
  sqlite3_blob_open db main c2 j 10 1 B
  sqlite3_blob_open db main c2 j 11 1 B2
  list [sqlite3_blob_bytes $B] [sqlite3_blob_bytes $B2]
} {24 45}
do_test 13.3.2 {
  sqlite3_blob_read $B 0 24
} [string repeat [binary format c 0] 24]
do_test 13.3.3 {
  sqlite3_blob_read $B2 0 45
} [string repeat [binary format c 0] 45]

# And also written:
#
do_test 13.4.1 {
  sqlite3_blob_write $B 0 [string repeat [binary format c 1] 24]
} {}
do_test 13.4.2 {
  sqlite3_blob_write $B2 0 [string repeat [binary format c 1] 45]
} {}
do_test 13.5 {
  sqlite3_blob_close $B
  sqlite3_blob_close $B2
  execsql { SELECT j FROM c2 }
} [list \
    [string repeat [binary format c 1] 24] \
    [string repeat [binary format c 1] 45] \
]


finish_test