# 2014 October 30
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
set testprefix e_blobwrite

#--------------------------------------------------------------------------
# EVIDENCE-OF: R-62898-22698 This function is used to write data into an
# open BLOB handle from a caller-supplied buffer. N bytes of data are
# copied from the buffer Z into the open BLOB, starting at offset
# iOffset.
#
set dots [string repeat . 40]
do_execsql_test 1.0 {
  CREATE TABLE t1(a INTEGER PRIMARY KEY, t TEXT);
  INSERT INTO t1 VALUES(-1, $dots);
  INSERT INTO t1 VALUES(-2, $dots);
  INSERT INTO t1 VALUES(-3, $dots);
  INSERT INTO t1 VALUES(-4, $dots);
  INSERT INTO t1 VALUES(-5, $dots);
  INSERT INTO t1 VALUES(-6, $dots);
}

proc blob_write_test {tn id iOffset blob nData final} {
  sqlite3_blob_open db main t1 t $id 1 B

  # EVIDENCE-OF: R-45864-01884 On success, sqlite3_blob_write() returns
  # SQLITE_OK. Otherwise, an error code or an extended error code is
  # returned.
  #
  #   This block tests the SQLITE_OK case in the requirement above (the
  #   Tcl sqlite3_blob_write() wrapper uses an empty string in place of
  #   "SQLITE_OK"). The error cases are tested by the "blob_write_error_test"
  #   tests below.
  #
  set res [sqlite3_blob_write $B $iOffset $blob $nData]
  uplevel [list do_test $tn.1 [list set {} $res] {}]

  sqlite3_blob_close $B
  uplevel [list do_execsql_test $tn.3 "SELECT t FROM t1 WHERE a=$id" $final]
}

set blob "0123456789012345678901234567890123456789"
blob_write_test 1.1 -1 0 $blob 10  { 0123456789.............................. }
blob_write_test 1.2 -2 8 $blob 10  { ........0123456789...................... }
blob_write_test 1.3 -3 8 $blob 1   { ........0............................... }
blob_write_test 1.4 -4 18 $blob 22 { ..................0123456789012345678901 }
blob_write_test 1.5 -5 18 $blob 0  { ........................................ }
blob_write_test 1.6 -6 0 $blob 40  { 0123456789012345678901234567890123456789 }


proc blob_write_error_test {tn B iOffset blob nData errcode errmsg} {

  # In cases where the underlying sqlite3_blob_write() function returns
  # SQLITE_OK, the Tcl wrapper returns an empty string. If the underlying
  # function returns an error, the Tcl wrapper throws an exception with
  # the error code as the Tcl exception message.
  #
  if {$errcode=="SQLITE_OK"} {
    set ret ""
    set isError 0
  } else {
    set ret $errcode
    set isError 1
  }

  set cmd [list sqlite3_blob_write $B $iOffset $blob $nData]
  uplevel [list do_test $tn.1 [subst -nocommands {
    list [catch {$cmd} msg] [set msg]              
  }] [list $isError $ret]]

  # EVIDENCE-OF: R-34782-18311 Unless SQLITE_MISUSE is returned, this
  # function sets the database connection error code and message
  # accessible via sqlite3_errcode() and sqlite3_errmsg() and related
  # functions.
  #
  if {$errcode == "SQLITE_MISUSE"} { error "test proc misuse!" }
  uplevel [list do_test $tn.2 [list sqlite3_errcode db] $errcode]
  uplevel [list do_test $tn.3 [list sqlite3_errmsg db] $errmsg]
}

do_execsql_test 2.0 {
  CREATE TABLE t2(a TEXT, b INTEGER PRIMARY KEY);
  INSERT INTO t2 VALUES($dots, 43);
  INSERT INTO t2 VALUES($dots, 44);
  INSERT INTO t2 VALUES($dots, 45);
}

# EVIDENCE-OF: R-63341-57517 If the BLOB handle passed as the first
# argument was not opened for writing (the flags parameter to
# sqlite3_blob_open() was zero), this function returns SQLITE_READONLY.
#
sqlite3_blob_open db main t2 a 43 0 B
blob_write_error_test 2.1 $B 0 $blob 10   \
    SQLITE_READONLY {attempt to write a readonly database}
sqlite3_blob_close $B

# EVIDENCE-OF: R-29804-27366 If offset iOffset is less than N bytes from
# the end of the BLOB, SQLITE_ERROR is returned and no data is written.
#
sqlite3_blob_open db main t2 a 44 3 B
blob_write_error_test 2.2.1 $B 31 $blob 10   \
    SQLITE_ERROR {SQL logic error or missing database}

# Make a successful write to the blob handle. This shows that the
# sqlite3_errcode() and sqlite3_errmsg() values are set even if the
# blob_write() call succeeds (see requirement in the [blob_write_error_test]
# proc).
blob_write_error_test 2.2.1 $B 30 $blob 10 SQLITE_OK {not an error}

# EVIDENCE-OF: R-58570-38916 If N or iOffset are less than zero
# SQLITE_ERROR is returned and no data is written.
#
blob_write_error_test 2.2.2 $B 31 $blob -1   \
    SQLITE_ERROR {SQL logic error or missing database}
blob_write_error_test 2.2.3 $B 20 $blob 10 SQLITE_OK {not an error}
blob_write_error_test 2.2.4 $B -1 $blob 10   \
    SQLITE_ERROR {SQL logic error or missing database}
sqlite3_blob_close $B

# EVIDENCE-OF: R-20958-54138 An attempt to write to an expired BLOB
# handle fails with an error code of SQLITE_ABORT.
#
do_test 2.3 {
  sqlite3_blob_open db main t2 a 43 0 B
  execsql { DELETE FROM t2 WHERE b=43 }
} {}
blob_write_error_test 2.3.1 $B 5 $blob 5 \
    SQLITE_ABORT {callback requested query abort}
do_test 2.3.2 {
  execsql { SELECT 1, 2, 3 }
  sqlite3_errcode db
} {SQLITE_OK}
blob_write_error_test 2.3.3 $B 5 $blob 5 \
    SQLITE_ABORT {callback requested query abort}
sqlite3_blob_close $B

# EVIDENCE-OF: R-08382-59936 Writes to the BLOB that occurred before the
# BLOB handle expired are not rolled back by the expiration of the
# handle, though of course those changes might have been overwritten by
# the statement that expired the BLOB handle or by other independent
# statements.
#
#   3.1.*: not rolled back, 
#   3.2.*: overwritten.
#
do_execsql_test 3.0 {
  CREATE TABLE t3(i INTEGER PRIMARY KEY, j TEXT, k TEXT);
  INSERT INTO t3 VALUES(1, $dots, $dots);
  INSERT INTO t3 VALUES(2, $dots, $dots);
  SELECT * FROM t3 WHERE i=1;
} {
  1
  ........................................
  ........................................
}
sqlite3_blob_open db main t3 j 1 1 B
blob_write_error_test 3.1.1 $B 5 $blob 10 SQLITE_OK {not an error}
do_execsql_test 3.1.2 {
  UPDATE t3 SET k = 'xyz' WHERE i=1;
  SELECT * FROM t3 WHERE i=1;
} {
  1 .....0123456789......................... xyz
}
blob_write_error_test 3.1.3 $B 15 $blob 10 \
    SQLITE_ABORT {callback requested query abort}
sqlite3_blob_close $B
do_execsql_test 3.1.4 {
  SELECT * FROM t3 WHERE i=1;
} {
  1 .....0123456789......................... xyz
}

sqlite3_blob_open db main t3 j 2 1 B
blob_write_error_test 3.2.1 $B 5 $blob 10 SQLITE_OK {not an error}
do_execsql_test 3.2.2 {
  UPDATE t3 SET j = 'xyz' WHERE i=2;
  SELECT * FROM t3 WHERE i=2;
} {
  2 xyz ........................................
}
blob_write_error_test 3.2.3 $B 15 $blob 10 \
    SQLITE_ABORT {callback requested query abort}
sqlite3_blob_close $B
do_execsql_test 3.2.4 {
  SELECT * FROM t3 WHERE i=2;
} {
  2 xyz ........................................
}


finish_test