| /* |
| ** The "printf" code that follows dates from the 1980's. It is in |
| ** the public domain. |
| ** |
| ************************************************************************** |
| ** |
| ** This file contains code for a set of "printf"-like routines. These |
| ** routines format strings much like the printf() from the standard C |
| ** library, though the implementation here has enhancements to support |
| ** SQLite. |
| */ |
| #include "sqliteInt.h" |
| |
| /* |
| ** Conversion types fall into various categories as defined by the |
| ** following enumeration. |
| */ |
| #define etRADIX 0 /* non-decimal integer types. %x %o */ |
| #define etFLOAT 1 /* Floating point. %f */ |
| #define etEXP 2 /* Exponentional notation. %e and %E */ |
| #define etGENERIC 3 /* Floating or exponential, depending on exponent. %g */ |
| #define etSIZE 4 /* Return number of characters processed so far. %n */ |
| #define etSTRING 5 /* Strings. %s */ |
| #define etDYNSTRING 6 /* Dynamically allocated strings. %z */ |
| #define etPERCENT 7 /* Percent symbol. %% */ |
| #define etCHARX 8 /* Characters. %c */ |
| /* The rest are extensions, not normally found in printf() */ |
| #define etSQLESCAPE 9 /* Strings with '\'' doubled. %q */ |
| #define etSQLESCAPE2 10 /* Strings with '\'' doubled and enclosed in '', |
| NULL pointers replaced by SQL NULL. %Q */ |
| #define etTOKEN 11 /* a pointer to a Token structure */ |
| #define etSRCLIST 12 /* a pointer to a SrcList */ |
| #define etPOINTER 13 /* The %p conversion */ |
| #define etSQLESCAPE3 14 /* %w -> Strings with '\"' doubled */ |
| #define etORDINAL 15 /* %r -> 1st, 2nd, 3rd, 4th, etc. English only */ |
| #define etDECIMAL 16 /* %d or %u, but not %x, %o */ |
| |
| #define etINVALID 17 /* Any unrecognized conversion type */ |
| |
| |
| /* |
| ** An "etByte" is an 8-bit unsigned value. |
| */ |
| typedef unsigned char etByte; |
| |
| /* |
| ** Each builtin conversion character (ex: the 'd' in "%d") is described |
| ** by an instance of the following structure |
| */ |
| typedef struct et_info { /* Information about each format field */ |
| char fmttype; /* The format field code letter */ |
| etByte base; /* The base for radix conversion */ |
| etByte flags; /* One or more of FLAG_ constants below */ |
| etByte type; /* Conversion paradigm */ |
| etByte charset; /* Offset into aDigits[] of the digits string */ |
| etByte prefix; /* Offset into aPrefix[] of the prefix string */ |
| } et_info; |
| |
| /* |
| ** Allowed values for et_info.flags |
| */ |
| #define FLAG_SIGNED 1 /* True if the value to convert is signed */ |
| #define FLAG_STRING 4 /* Allow infinite precision */ |
| |
| |
| /* |
| ** The following table is searched linearly, so it is good to put the |
| ** most frequently used conversion types first. |
| */ |
| static const char aDigits[] = "0123456789ABCDEF0123456789abcdef"; |
| static const char aPrefix[] = "-x0\000X0"; |
| static const et_info fmtinfo[] = { |
| { 'd', 10, 1, etDECIMAL, 0, 0 }, |
| { 's', 0, 4, etSTRING, 0, 0 }, |
| { 'g', 0, 1, etGENERIC, 30, 0 }, |
| { 'z', 0, 4, etDYNSTRING, 0, 0 }, |
| { 'q', 0, 4, etSQLESCAPE, 0, 0 }, |
| { 'Q', 0, 4, etSQLESCAPE2, 0, 0 }, |
| { 'w', 0, 4, etSQLESCAPE3, 0, 0 }, |
| { 'c', 0, 0, etCHARX, 0, 0 }, |
| { 'o', 8, 0, etRADIX, 0, 2 }, |
| { 'u', 10, 0, etDECIMAL, 0, 0 }, |
| { 'x', 16, 0, etRADIX, 16, 1 }, |
| { 'X', 16, 0, etRADIX, 0, 4 }, |
| #ifndef SQLITE_OMIT_FLOATING_POINT |
| { 'f', 0, 1, etFLOAT, 0, 0 }, |
| { 'e', 0, 1, etEXP, 30, 0 }, |
| { 'E', 0, 1, etEXP, 14, 0 }, |
| { 'G', 0, 1, etGENERIC, 14, 0 }, |
| #endif |
| { 'i', 10, 1, etDECIMAL, 0, 0 }, |
| { 'n', 0, 0, etSIZE, 0, 0 }, |
| { '%', 0, 0, etPERCENT, 0, 0 }, |
| { 'p', 16, 0, etPOINTER, 0, 1 }, |
| |
| /* All the rest are undocumented and are for internal use only */ |
| { 'T', 0, 0, etTOKEN, 0, 0 }, |
| { 'S', 0, 0, etSRCLIST, 0, 0 }, |
| { 'r', 10, 1, etORDINAL, 0, 0 }, |
| }; |
| |
| /* Floating point constants used for rounding */ |
| static const double arRound[] = { |
| 5.0e-01, 5.0e-02, 5.0e-03, 5.0e-04, 5.0e-05, |
| 5.0e-06, 5.0e-07, 5.0e-08, 5.0e-09, 5.0e-10, |
| }; |
| |
| /* |
| ** If SQLITE_OMIT_FLOATING_POINT is defined, then none of the floating point |
| ** conversions will work. |
| */ |
| #ifndef SQLITE_OMIT_FLOATING_POINT |
| /* |
| ** "*val" is a double such that 0.1 <= *val < 10.0 |
| ** Return the ascii code for the leading digit of *val, then |
| ** multiply "*val" by 10.0 to renormalize. |
| ** |
| ** Example: |
| ** input: *val = 3.14159 |
| ** output: *val = 1.4159 function return = '3' |
| ** |
| ** The counter *cnt is incremented each time. After counter exceeds |
| ** 16 (the number of significant digits in a 64-bit float) '0' is |
| ** always returned. |
| */ |
| static char et_getdigit(LONGDOUBLE_TYPE *val, int *cnt){ |
| int digit; |
| LONGDOUBLE_TYPE d; |
| if( (*cnt)<=0 ) return '0'; |
| (*cnt)--; |
| digit = (int)*val; |
| d = digit; |
| digit += '0'; |
| *val = (*val - d)*10.0; |
| return (char)digit; |
| } |
| #endif /* SQLITE_OMIT_FLOATING_POINT */ |
| |
| /* |
| ** Set the StrAccum object to an error mode. |
| */ |
| static void setStrAccumError(StrAccum *p, u8 eError){ |
| assert( eError==SQLITE_NOMEM || eError==SQLITE_TOOBIG ); |
| p->accError = eError; |
| if( p->mxAlloc ) sqlite3_str_reset(p); |
| if( eError==SQLITE_TOOBIG ) sqlite3ErrorToParser(p->db, eError); |
| } |
| |
| /* |
| ** Extra argument values from a PrintfArguments object |
| */ |
| static sqlite3_int64 getIntArg(PrintfArguments *p){ |
| if( p->nArg<=p->nUsed ) return 0; |
| return sqlite3_value_int64(p->apArg[p->nUsed++]); |
| } |
| static double getDoubleArg(PrintfArguments *p){ |
| if( p->nArg<=p->nUsed ) return 0.0; |
| return sqlite3_value_double(p->apArg[p->nUsed++]); |
| } |
| static char *getTextArg(PrintfArguments *p){ |
| if( p->nArg<=p->nUsed ) return 0; |
| return (char*)sqlite3_value_text(p->apArg[p->nUsed++]); |
| } |
| |
| /* |
| ** Allocate memory for a temporary buffer needed for printf rendering. |
| ** |
| ** If the requested size of the temp buffer is larger than the size |
| ** of the output buffer in pAccum, then cause an SQLITE_TOOBIG error. |
| ** Do the size check before the memory allocation to prevent rogue |
| ** SQL from requesting large allocations using the precision or width |
| ** field of the printf() function. |
| */ |
| static char *printfTempBuf(sqlite3_str *pAccum, sqlite3_int64 n){ |
| char *z; |
| if( pAccum->accError ) return 0; |
| if( n>pAccum->nAlloc && n>pAccum->mxAlloc ){ |
| setStrAccumError(pAccum, SQLITE_TOOBIG); |
| return 0; |
| } |
| z = sqlite3DbMallocRaw(pAccum->db, n); |
| if( z==0 ){ |
| setStrAccumError(pAccum, SQLITE_NOMEM); |
| } |
| return z; |
| } |
| |
| /* |
| ** On machines with a small stack size, you can redefine the |
| ** SQLITE_PRINT_BUF_SIZE to be something smaller, if desired. |
| */ |
| #ifndef SQLITE_PRINT_BUF_SIZE |
| # define SQLITE_PRINT_BUF_SIZE 70 |
| #endif |
| #define etBUFSIZE SQLITE_PRINT_BUF_SIZE /* Size of the output buffer */ |
| |
| /* |
| ** Render a string given by "fmt" into the StrAccum object. |
| */ |
| void sqlite3_str_vappendf( |
| sqlite3_str *pAccum, /* Accumulate results here */ |
| const char *fmt, /* Format string */ |
| va_list ap /* arguments */ |
| ){ |
| int c; /* Next character in the format string */ |
| char *bufpt; /* Pointer to the conversion buffer */ |
| int precision; /* Precision of the current field */ |
| int length; /* Length of the field */ |
| int idx; /* A general purpose loop counter */ |
| int width; /* Width of the current field */ |
| etByte flag_leftjustify; /* True if "-" flag is present */ |
| etByte flag_prefix; /* '+' or ' ' or 0 for prefix */ |
| etByte flag_alternateform; /* True if "#" flag is present */ |
| etByte flag_altform2; /* True if "!" flag is present */ |
| etByte flag_zeropad; /* True if field width constant starts with zero */ |
| etByte flag_long; /* 1 for the "l" flag, 2 for "ll", 0 by default */ |
| etByte done; /* Loop termination flag */ |
| etByte cThousand; /* Thousands separator for %d and %u */ |
| etByte xtype = etINVALID; /* Conversion paradigm */ |
| u8 bArgList; /* True for SQLITE_PRINTF_SQLFUNC */ |
| char prefix; /* Prefix character. "+" or "-" or " " or '\0'. */ |
| sqlite_uint64 longvalue; /* Value for integer types */ |
| LONGDOUBLE_TYPE realvalue; /* Value for real types */ |
| const et_info *infop; /* Pointer to the appropriate info structure */ |
| char *zOut; /* Rendering buffer */ |
| int nOut; /* Size of the rendering buffer */ |
| char *zExtra = 0; /* Malloced memory used by some conversion */ |
| #ifndef SQLITE_OMIT_FLOATING_POINT |
| int exp, e2; /* exponent of real numbers */ |
| int nsd; /* Number of significant digits returned */ |
| double rounder; /* Used for rounding floating point values */ |
| etByte flag_dp; /* True if decimal point should be shown */ |
| etByte flag_rtz; /* True if trailing zeros should be removed */ |
| #endif |
| PrintfArguments *pArgList = 0; /* Arguments for SQLITE_PRINTF_SQLFUNC */ |
| char buf[etBUFSIZE]; /* Conversion buffer */ |
| |
| /* pAccum never starts out with an empty buffer that was obtained from |
| ** malloc(). This precondition is required by the mprintf("%z...") |
| ** optimization. */ |
| assert( pAccum->nChar>0 || (pAccum->printfFlags&SQLITE_PRINTF_MALLOCED)==0 ); |
| |
| bufpt = 0; |
| if( (pAccum->printfFlags & SQLITE_PRINTF_SQLFUNC)!=0 ){ |
| pArgList = va_arg(ap, PrintfArguments*); |
| bArgList = 1; |
| }else{ |
| bArgList = 0; |
| } |
| for(; (c=(*fmt))!=0; ++fmt){ |
| if( c!='%' ){ |
| bufpt = (char *)fmt; |
| #if HAVE_STRCHRNUL |
| fmt = strchrnul(fmt, '%'); |
| #else |
| do{ fmt++; }while( *fmt && *fmt != '%' ); |
| #endif |
| sqlite3_str_append(pAccum, bufpt, (int)(fmt - bufpt)); |
| if( *fmt==0 ) break; |
| } |
| if( (c=(*++fmt))==0 ){ |
| sqlite3_str_append(pAccum, "%", 1); |
| break; |
| } |
| /* Find out what flags are present */ |
| flag_leftjustify = flag_prefix = cThousand = |
| flag_alternateform = flag_altform2 = flag_zeropad = 0; |
| done = 0; |
| width = 0; |
| flag_long = 0; |
| precision = -1; |
| do{ |
| switch( c ){ |
| case '-': flag_leftjustify = 1; break; |
| case '+': flag_prefix = '+'; break; |
| case ' ': flag_prefix = ' '; break; |
| case '#': flag_alternateform = 1; break; |
| case '!': flag_altform2 = 1; break; |
| case '0': flag_zeropad = 1; break; |
| case ',': cThousand = ','; break; |
| default: done = 1; break; |
| case 'l': { |
| flag_long = 1; |
| c = *++fmt; |
| if( c=='l' ){ |
| c = *++fmt; |
| flag_long = 2; |
| } |
| done = 1; |
| break; |
| } |
| case '1': case '2': case '3': case '4': case '5': |
| case '6': case '7': case '8': case '9': { |
| unsigned wx = c - '0'; |
| while( (c = *++fmt)>='0' && c<='9' ){ |
| wx = wx*10 + c - '0'; |
| } |
| testcase( wx>0x7fffffff ); |
| width = wx & 0x7fffffff; |
| #ifdef SQLITE_PRINTF_PRECISION_LIMIT |
| if( width>SQLITE_PRINTF_PRECISION_LIMIT ){ |
| width = SQLITE_PRINTF_PRECISION_LIMIT; |
| } |
| #endif |
| if( c!='.' && c!='l' ){ |
| done = 1; |
| }else{ |
| fmt--; |
| } |
| break; |
| } |
| case '*': { |
| if( bArgList ){ |
| width = (int)getIntArg(pArgList); |
| }else{ |
| width = va_arg(ap,int); |
| } |
| if( width<0 ){ |
| flag_leftjustify = 1; |
| width = width >= -2147483647 ? -width : 0; |
| } |
| #ifdef SQLITE_PRINTF_PRECISION_LIMIT |
| if( width>SQLITE_PRINTF_PRECISION_LIMIT ){ |
| width = SQLITE_PRINTF_PRECISION_LIMIT; |
| } |
| #endif |
| if( (c = fmt[1])!='.' && c!='l' ){ |
| c = *++fmt; |
| done = 1; |
| } |
| break; |
| } |
| case '.': { |
| c = *++fmt; |
| if( c=='*' ){ |
| if( bArgList ){ |
| precision = (int)getIntArg(pArgList); |
| }else{ |
| precision = va_arg(ap,int); |
| } |
| if( precision<0 ){ |
| precision = precision >= -2147483647 ? -precision : -1; |
| } |
| c = *++fmt; |
| }else{ |
| unsigned px = 0; |
| while( c>='0' && c<='9' ){ |
| px = px*10 + c - '0'; |
| c = *++fmt; |
| } |
| testcase( px>0x7fffffff ); |
| precision = px & 0x7fffffff; |
| } |
| #ifdef SQLITE_PRINTF_PRECISION_LIMIT |
| if( precision>SQLITE_PRINTF_PRECISION_LIMIT ){ |
| precision = SQLITE_PRINTF_PRECISION_LIMIT; |
| } |
| #endif |
| if( c=='l' ){ |
| --fmt; |
| }else{ |
| done = 1; |
| } |
| break; |
| } |
| } |
| }while( !done && (c=(*++fmt))!=0 ); |
| |
| /* Fetch the info entry for the field */ |
| infop = &fmtinfo[0]; |
| xtype = etINVALID; |
| for(idx=0; idx<ArraySize(fmtinfo); idx++){ |
| if( c==fmtinfo[idx].fmttype ){ |
| infop = &fmtinfo[idx]; |
| xtype = infop->type; |
| break; |
| } |
| } |
| |
| /* |
| ** At this point, variables are initialized as follows: |
| ** |
| ** flag_alternateform TRUE if a '#' is present. |
| ** flag_altform2 TRUE if a '!' is present. |
| ** flag_prefix '+' or ' ' or zero |
| ** flag_leftjustify TRUE if a '-' is present or if the |
| ** field width was negative. |
| ** flag_zeropad TRUE if the width began with 0. |
| ** flag_long 1 for "l", 2 for "ll" |
| ** width The specified field width. This is |
| ** always non-negative. Zero is the default. |
| ** precision The specified precision. The default |
| ** is -1. |
| ** xtype The class of the conversion. |
| ** infop Pointer to the appropriate info struct. |
| */ |
| switch( xtype ){ |
| case etPOINTER: |
| flag_long = sizeof(char*)==sizeof(i64) ? 2 : |
| sizeof(char*)==sizeof(long int) ? 1 : 0; |
| /* Fall through into the next case */ |
| case etORDINAL: |
| case etRADIX: |
| cThousand = 0; |
| /* Fall through into the next case */ |
| case etDECIMAL: |
| if( infop->flags & FLAG_SIGNED ){ |
| i64 v; |
| if( bArgList ){ |
| v = getIntArg(pArgList); |
| }else if( flag_long ){ |
| if( flag_long==2 ){ |
| v = va_arg(ap,i64) ; |
| }else{ |
| v = va_arg(ap,long int); |
| } |
| }else{ |
| v = va_arg(ap,int); |
| } |
| if( v<0 ){ |
| if( v==SMALLEST_INT64 ){ |
| longvalue = ((u64)1)<<63; |
| }else{ |
| longvalue = -v; |
| } |
| prefix = '-'; |
| }else{ |
| longvalue = v; |
| prefix = flag_prefix; |
| } |
| }else{ |
| if( bArgList ){ |
| longvalue = (u64)getIntArg(pArgList); |
| }else if( flag_long ){ |
| if( flag_long==2 ){ |
| longvalue = va_arg(ap,u64); |
| }else{ |
| longvalue = va_arg(ap,unsigned long int); |
| } |
| }else{ |
| longvalue = va_arg(ap,unsigned int); |
| } |
| prefix = 0; |
| } |
| if( longvalue==0 ) flag_alternateform = 0; |
| if( flag_zeropad && precision<width-(prefix!=0) ){ |
| precision = width-(prefix!=0); |
| } |
| if( precision<etBUFSIZE-10-etBUFSIZE/3 ){ |
| nOut = etBUFSIZE; |
| zOut = buf; |
| }else{ |
| u64 n; |
| n = (u64)precision + 10; |
| if( cThousand ) n += precision/3; |
| zOut = zExtra = printfTempBuf(pAccum, n); |
| if( zOut==0 ) return; |
| nOut = (int)n; |
| } |
| bufpt = &zOut[nOut-1]; |
| if( xtype==etORDINAL ){ |
| static const char zOrd[] = "thstndrd"; |
| int x = (int)(longvalue % 10); |
| if( x>=4 || (longvalue/10)%10==1 ){ |
| x = 0; |
| } |
| *(--bufpt) = zOrd[x*2+1]; |
| *(--bufpt) = zOrd[x*2]; |
| } |
| { |
| const char *cset = &aDigits[infop->charset]; |
| u8 base = infop->base; |
| do{ /* Convert to ascii */ |
| *(--bufpt) = cset[longvalue%base]; |
| longvalue = longvalue/base; |
| }while( longvalue>0 ); |
| } |
| length = (int)(&zOut[nOut-1]-bufpt); |
| while( precision>length ){ |
| *(--bufpt) = '0'; /* Zero pad */ |
| length++; |
| } |
| if( cThousand ){ |
| int nn = (length - 1)/3; /* Number of "," to insert */ |
| int ix = (length - 1)%3 + 1; |
| bufpt -= nn; |
| for(idx=0; nn>0; idx++){ |
| bufpt[idx] = bufpt[idx+nn]; |
| ix--; |
| if( ix==0 ){ |
| bufpt[++idx] = cThousand; |
| nn--; |
| ix = 3; |
| } |
| } |
| } |
| if( prefix ) *(--bufpt) = prefix; /* Add sign */ |
| if( flag_alternateform && infop->prefix ){ /* Add "0" or "0x" */ |
| const char *pre; |
| char x; |
| pre = &aPrefix[infop->prefix]; |
| for(; (x=(*pre))!=0; pre++) *(--bufpt) = x; |
| } |
| length = (int)(&zOut[nOut-1]-bufpt); |
| break; |
| case etFLOAT: |
| case etEXP: |
| case etGENERIC: |
| if( bArgList ){ |
| realvalue = getDoubleArg(pArgList); |
| }else{ |
| realvalue = va_arg(ap,double); |
| } |
| #ifdef SQLITE_OMIT_FLOATING_POINT |
| length = 0; |
| #else |
| if( precision<0 ) precision = 6; /* Set default precision */ |
| if( realvalue<0.0 ){ |
| realvalue = -realvalue; |
| prefix = '-'; |
| }else{ |
| prefix = flag_prefix; |
| } |
| if( xtype==etGENERIC && precision>0 ) precision--; |
| testcase( precision>0xfff ); |
| idx = precision & 0xfff; |
| rounder = arRound[idx%10]; |
| while( idx>=10 ){ rounder *= 1.0e-10; idx -= 10; } |
| if( xtype==etFLOAT ){ |
| double rx = (double)realvalue; |
| sqlite3_uint64 u; |
| int ex; |
| memcpy(&u, &rx, sizeof(u)); |
| ex = -1023 + (int)((u>>52)&0x7ff); |
| if( precision+(ex/3) < 15 ) rounder += realvalue*3e-16; |
| realvalue += rounder; |
| } |
| /* Normalize realvalue to within 10.0 > realvalue >= 1.0 */ |
| exp = 0; |
| if( sqlite3IsNaN((double)realvalue) ){ |
| bufpt = "NaN"; |
| length = 3; |
| break; |
| } |
| if( realvalue>0.0 ){ |
| LONGDOUBLE_TYPE scale = 1.0; |
| while( realvalue>=1e100*scale && exp<=350 ){ scale *= 1e100;exp+=100;} |
| while( realvalue>=1e10*scale && exp<=350 ){ scale *= 1e10; exp+=10; } |
| while( realvalue>=10.0*scale && exp<=350 ){ scale *= 10.0; exp++; } |
| realvalue /= scale; |
| while( realvalue<1e-8 ){ realvalue *= 1e8; exp-=8; } |
| while( realvalue<1.0 ){ realvalue *= 10.0; exp--; } |
| if( exp>350 ){ |
| bufpt = buf; |
| buf[0] = prefix; |
| memcpy(buf+(prefix!=0),"Inf",4); |
| length = 3+(prefix!=0); |
| break; |
| } |
| } |
| bufpt = buf; |
| /* |
| ** If the field type is etGENERIC, then convert to either etEXP |
| ** or etFLOAT, as appropriate. |
| */ |
| if( xtype!=etFLOAT ){ |
| realvalue += rounder; |
| if( realvalue>=10.0 ){ realvalue *= 0.1; exp++; } |
| } |
| if( xtype==etGENERIC ){ |
| flag_rtz = !flag_alternateform; |
| if( exp<-4 || exp>precision ){ |
| xtype = etEXP; |
| }else{ |
| precision = precision - exp; |
| xtype = etFLOAT; |
| } |
| }else{ |
| flag_rtz = flag_altform2; |
| } |
| if( xtype==etEXP ){ |
| e2 = 0; |
| }else{ |
| e2 = exp; |
| } |
| { |
| i64 szBufNeeded; /* Size of a temporary buffer needed */ |
| szBufNeeded = MAX(e2,0)+(i64)precision+(i64)width+15; |
| if( szBufNeeded > etBUFSIZE ){ |
| bufpt = zExtra = printfTempBuf(pAccum, szBufNeeded); |
| if( bufpt==0 ) return; |
| } |
| } |
| zOut = bufpt; |
| nsd = 16 + flag_altform2*10; |
| flag_dp = (precision>0 ?1:0) | flag_alternateform | flag_altform2; |
| /* The sign in front of the number */ |
| if( prefix ){ |
| *(bufpt++) = prefix; |
| } |
| /* Digits prior to the decimal point */ |
| if( e2<0 ){ |
| *(bufpt++) = '0'; |
| }else{ |
| for(; e2>=0; e2--){ |
| *(bufpt++) = et_getdigit(&realvalue,&nsd); |
| } |
| } |
| /* The decimal point */ |
| if( flag_dp ){ |
| *(bufpt++) = '.'; |
| } |
| /* "0" digits after the decimal point but before the first |
| ** significant digit of the number */ |
| for(e2++; e2<0; precision--, e2++){ |
| assert( precision>0 ); |
| *(bufpt++) = '0'; |
| } |
| /* Significant digits after the decimal point */ |
| while( (precision--)>0 ){ |
| *(bufpt++) = et_getdigit(&realvalue,&nsd); |
| } |
| /* Remove trailing zeros and the "." if no digits follow the "." */ |
| if( flag_rtz && flag_dp ){ |
| while( bufpt[-1]=='0' ) *(--bufpt) = 0; |
| assert( bufpt>zOut ); |
| if( bufpt[-1]=='.' ){ |
| if( flag_altform2 ){ |
| *(bufpt++) = '0'; |
| }else{ |
| *(--bufpt) = 0; |
| } |
| } |
| } |
| /* Add the "eNNN" suffix */ |
| if( xtype==etEXP ){ |
| *(bufpt++) = aDigits[infop->charset]; |
| if( exp<0 ){ |
| *(bufpt++) = '-'; exp = -exp; |
| }else{ |
| *(bufpt++) = '+'; |
| } |
| if( exp>=100 ){ |
| *(bufpt++) = (char)((exp/100)+'0'); /* 100's digit */ |
| exp %= 100; |
| } |
| *(bufpt++) = (char)(exp/10+'0'); /* 10's digit */ |
| *(bufpt++) = (char)(exp%10+'0'); /* 1's digit */ |
| } |
| *bufpt = 0; |
| |
| /* The converted number is in buf[] and zero terminated. Output it. |
| ** Note that the number is in the usual order, not reversed as with |
| ** integer conversions. */ |
| length = (int)(bufpt-zOut); |
| bufpt = zOut; |
| |
| /* Special case: Add leading zeros if the flag_zeropad flag is |
| ** set and we are not left justified */ |
| if( flag_zeropad && !flag_leftjustify && length < width){ |
| int i; |
| int nPad = width - length; |
| for(i=width; i>=nPad; i--){ |
| bufpt[i] = bufpt[i-nPad]; |
| } |
| i = prefix!=0; |
| while( nPad-- ) bufpt[i++] = '0'; |
| length = width; |
| } |
| #endif /* !defined(SQLITE_OMIT_FLOATING_POINT) */ |
| break; |
| case etSIZE: |
| if( !bArgList ){ |
| *(va_arg(ap,int*)) = pAccum->nChar; |
| } |
| length = width = 0; |
| break; |
| case etPERCENT: |
| buf[0] = '%'; |
| bufpt = buf; |
| length = 1; |
| break; |
| case etCHARX: |
| if( bArgList ){ |
| bufpt = getTextArg(pArgList); |
| length = 1; |
| if( bufpt ){ |
| buf[0] = c = *(bufpt++); |
| if( (c&0xc0)==0xc0 ){ |
| while( length<4 && (bufpt[0]&0xc0)==0x80 ){ |
| buf[length++] = *(bufpt++); |
| } |
| } |
| }else{ |
| buf[0] = 0; |
| } |
| }else{ |
| unsigned int ch = va_arg(ap,unsigned int); |
| if( ch<0x00080 ){ |
| buf[0] = ch & 0xff; |
| length = 1; |
| }else if( ch<0x00800 ){ |
| buf[0] = 0xc0 + (u8)((ch>>6)&0x1f); |
| buf[1] = 0x80 + (u8)(ch & 0x3f); |
| length = 2; |
| }else if( ch<0x10000 ){ |
| buf[0] = 0xe0 + (u8)((ch>>12)&0x0f); |
| buf[1] = 0x80 + (u8)((ch>>6) & 0x3f); |
| buf[2] = 0x80 + (u8)(ch & 0x3f); |
| length = 3; |
| }else{ |
| buf[0] = 0xf0 + (u8)((ch>>18) & 0x07); |
| buf[1] = 0x80 + (u8)((ch>>12) & 0x3f); |
| buf[2] = 0x80 + (u8)((ch>>6) & 0x3f); |
| buf[3] = 0x80 + (u8)(ch & 0x3f); |
| length = 4; |
| } |
| } |
| if( precision>1 ){ |
| width -= precision-1; |
| if( width>1 && !flag_leftjustify ){ |
| sqlite3_str_appendchar(pAccum, width-1, ' '); |
| width = 0; |
| } |
| while( precision-- > 1 ){ |
| sqlite3_str_append(pAccum, buf, length); |
| } |
| } |
| bufpt = buf; |
| flag_altform2 = 1; |
| goto adjust_width_for_utf8; |
| case etSTRING: |
| case etDYNSTRING: |
| if( bArgList ){ |
| bufpt = getTextArg(pArgList); |
| xtype = etSTRING; |
| }else{ |
| bufpt = va_arg(ap,char*); |
| } |
| if( bufpt==0 ){ |
| bufpt = ""; |
| }else if( xtype==etDYNSTRING ){ |
| if( pAccum->nChar==0 |
| && pAccum->mxAlloc |
| && width==0 |
| && precision<0 |
| && pAccum->accError==0 |
| ){ |
| /* Special optimization for sqlite3_mprintf("%z..."): |
| ** Extend an existing memory allocation rather than creating |
| ** a new one. */ |
| assert( (pAccum->printfFlags&SQLITE_PRINTF_MALLOCED)==0 ); |
| pAccum->zText = bufpt; |
| pAccum->nAlloc = sqlite3DbMallocSize(pAccum->db, bufpt); |
| pAccum->nChar = 0x7fffffff & (int)strlen(bufpt); |
| pAccum->printfFlags |= SQLITE_PRINTF_MALLOCED; |
| length = 0; |
| break; |
| } |
| zExtra = bufpt; |
| } |
| if( precision>=0 ){ |
| if( flag_altform2 ){ |
| /* Set length to the number of bytes needed in order to display |
| ** precision characters */ |
| unsigned char *z = (unsigned char*)bufpt; |
| while( precision-- > 0 && z[0] ){ |
| SQLITE_SKIP_UTF8(z); |
| } |
| length = (int)(z - (unsigned char*)bufpt); |
| }else{ |
| for(length=0; length<precision && bufpt[length]; length++){} |
| } |
| }else{ |
| length = 0x7fffffff & (int)strlen(bufpt); |
| } |
| adjust_width_for_utf8: |
| if( flag_altform2 && width>0 ){ |
| /* Adjust width to account for extra bytes in UTF-8 characters */ |
| int ii = length - 1; |
| while( ii>=0 ) if( (bufpt[ii--] & 0xc0)==0x80 ) width++; |
| } |
| break; |
| case etSQLESCAPE: /* %q: Escape ' characters */ |
| case etSQLESCAPE2: /* %Q: Escape ' and enclose in '...' */ |
| case etSQLESCAPE3: { /* %w: Escape " characters */ |
| int i, j, k, n, isnull; |
| int needQuote; |
| char ch; |
| char q = ((xtype==etSQLESCAPE3)?'"':'\''); /* Quote character */ |
| char *escarg; |
| |
| if( bArgList ){ |
| escarg = getTextArg(pArgList); |
| }else{ |
| escarg = va_arg(ap,char*); |
| } |
| isnull = escarg==0; |
| if( isnull ) escarg = (xtype==etSQLESCAPE2 ? "NULL" : "(NULL)"); |
| /* For %q, %Q, and %w, the precision is the number of byte (or |
| ** characters if the ! flags is present) to use from the input. |
| ** Because of the extra quoting characters inserted, the number |
| ** of output characters may be larger than the precision. |
| */ |
| k = precision; |
| for(i=n=0; k!=0 && (ch=escarg[i])!=0; i++, k--){ |
| if( ch==q ) n++; |
| if( flag_altform2 && (ch&0xc0)==0xc0 ){ |
| while( (escarg[i+1]&0xc0)==0x80 ){ i++; } |
| } |
| } |
| needQuote = !isnull && xtype==etSQLESCAPE2; |
| n += i + 3; |
| if( n>etBUFSIZE ){ |
| bufpt = zExtra = printfTempBuf(pAccum, n); |
| if( bufpt==0 ) return; |
| }else{ |
| bufpt = buf; |
| } |
| j = 0; |
| if( needQuote ) bufpt[j++] = q; |
| k = i; |
| for(i=0; i<k; i++){ |
| bufpt[j++] = ch = escarg[i]; |
| if( ch==q ) bufpt[j++] = ch; |
| } |
| if( needQuote ) bufpt[j++] = q; |
| bufpt[j] = 0; |
| length = j; |
| goto adjust_width_for_utf8; |
| } |
| case etTOKEN: { |
| Token *pToken; |
| if( (pAccum->printfFlags & SQLITE_PRINTF_INTERNAL)==0 ) return; |
| pToken = va_arg(ap, Token*); |
| assert( bArgList==0 ); |
| if( pToken && pToken->n ){ |
| sqlite3_str_append(pAccum, (const char*)pToken->z, pToken->n); |
| } |
| length = width = 0; |
| break; |
| } |
| case etSRCLIST: { |
| SrcList *pSrc; |
| int k; |
| struct SrcList_item *pItem; |
| if( (pAccum->printfFlags & SQLITE_PRINTF_INTERNAL)==0 ) return; |
| pSrc = va_arg(ap, SrcList*); |
| k = va_arg(ap, int); |
| pItem = &pSrc->a[k]; |
| assert( bArgList==0 ); |
| assert( k>=0 && k<pSrc->nSrc ); |
| if( pItem->zDatabase ){ |
| sqlite3_str_appendall(pAccum, pItem->zDatabase); |
| sqlite3_str_append(pAccum, ".", 1); |
| } |
| sqlite3_str_appendall(pAccum, pItem->zName); |
| length = width = 0; |
| break; |
| } |
| default: { |
| assert( xtype==etINVALID ); |
| return; |
| } |
| }/* End switch over the format type */ |
| /* |
| ** The text of the conversion is pointed to by "bufpt" and is |
| ** "length" characters long. The field width is "width". Do |
| ** the output. Both length and width are in bytes, not characters, |
| ** at this point. If the "!" flag was present on string conversions |
| ** indicating that width and precision should be expressed in characters, |
| ** then the values have been translated prior to reaching this point. |
| */ |
| width -= length; |
| if( width>0 ){ |
| if( !flag_leftjustify ) sqlite3_str_appendchar(pAccum, width, ' '); |
| sqlite3_str_append(pAccum, bufpt, length); |
| if( flag_leftjustify ) sqlite3_str_appendchar(pAccum, width, ' '); |
| }else{ |
| sqlite3_str_append(pAccum, bufpt, length); |
| } |
| |
| if( zExtra ){ |
| sqlite3DbFree(pAccum->db, zExtra); |
| zExtra = 0; |
| } |
| }/* End for loop over the format string */ |
| } /* End of function */ |
| |
| /* |
| ** Enlarge the memory allocation on a StrAccum object so that it is |
| ** able to accept at least N more bytes of text. |
| ** |
| ** Return the number of bytes of text that StrAccum is able to accept |
| ** after the attempted enlargement. The value returned might be zero. |
| */ |
| static int sqlite3StrAccumEnlarge(StrAccum *p, int N){ |
| char *zNew; |
| assert( p->nChar+(i64)N >= p->nAlloc ); /* Only called if really needed */ |
| if( p->accError ){ |
| testcase(p->accError==SQLITE_TOOBIG); |
| testcase(p->accError==SQLITE_NOMEM); |
| return 0; |
| } |
| if( p->mxAlloc==0 ){ |
| setStrAccumError(p, SQLITE_TOOBIG); |
| return p->nAlloc - p->nChar - 1; |
| }else{ |
| char *zOld = isMalloced(p) ? p->zText : 0; |
| i64 szNew = p->nChar; |
| szNew += N + 1; |
| if( szNew+p->nChar<=p->mxAlloc ){ |
| /* Force exponential buffer size growth as long as it does not overflow, |
| ** to avoid having to call this routine too often */ |
| szNew += p->nChar; |
| } |
| if( szNew > p->mxAlloc ){ |
| sqlite3_str_reset(p); |
| setStrAccumError(p, SQLITE_TOOBIG); |
| return 0; |
| }else{ |
| p->nAlloc = (int)szNew; |
| } |
| if( p->db ){ |
| zNew = sqlite3DbRealloc(p->db, zOld, p->nAlloc); |
| }else{ |
| zNew = sqlite3_realloc64(zOld, p->nAlloc); |
| } |
| if( zNew ){ |
| assert( p->zText!=0 || p->nChar==0 ); |
| if( !isMalloced(p) && p->nChar>0 ) memcpy(zNew, p->zText, p->nChar); |
| p->zText = zNew; |
| p->nAlloc = sqlite3DbMallocSize(p->db, zNew); |
| p->printfFlags |= SQLITE_PRINTF_MALLOCED; |
| }else{ |
| sqlite3_str_reset(p); |
| setStrAccumError(p, SQLITE_NOMEM); |
| return 0; |
| } |
| } |
| return N; |
| } |
| |
| /* |
| ** Append N copies of character c to the given string buffer. |
| */ |
| void sqlite3_str_appendchar(sqlite3_str *p, int N, char c){ |
| testcase( p->nChar + (i64)N > 0x7fffffff ); |
| if( p->nChar+(i64)N >= p->nAlloc && (N = sqlite3StrAccumEnlarge(p, N))<=0 ){ |
| return; |
| } |
| while( (N--)>0 ) p->zText[p->nChar++] = c; |
| } |
| |
| /* |
| ** The StrAccum "p" is not large enough to accept N new bytes of z[]. |
| ** So enlarge if first, then do the append. |
| ** |
| ** This is a helper routine to sqlite3_str_append() that does special-case |
| ** work (enlarging the buffer) using tail recursion, so that the |
| ** sqlite3_str_append() routine can use fast calling semantics. |
| */ |
| static void SQLITE_NOINLINE enlargeAndAppend(StrAccum *p, const char *z, int N){ |
| N = sqlite3StrAccumEnlarge(p, N); |
| if( N>0 ){ |
| memcpy(&p->zText[p->nChar], z, N); |
| p->nChar += N; |
| } |
| } |
| |
| /* |
| ** Append N bytes of text from z to the StrAccum object. Increase the |
| ** size of the memory allocation for StrAccum if necessary. |
| */ |
| void sqlite3_str_append(sqlite3_str *p, const char *z, int N){ |
| assert( z!=0 || N==0 ); |
| assert( p->zText!=0 || p->nChar==0 || p->accError ); |
| assert( N>=0 ); |
| assert( p->accError==0 || p->nAlloc==0 || p->mxAlloc==0 ); |
| if( p->nChar+N >= p->nAlloc ){ |
| enlargeAndAppend(p,z,N); |
| }else if( N ){ |
| assert( p->zText ); |
| p->nChar += N; |
| memcpy(&p->zText[p->nChar-N], z, N); |
| } |
| } |
| |
| /* |
| ** Append the complete text of zero-terminated string z[] to the p string. |
| */ |
| void sqlite3_str_appendall(sqlite3_str *p, const char *z){ |
| sqlite3_str_append(p, z, sqlite3Strlen30(z)); |
| } |
| |
| |
| /* |
| ** Finish off a string by making sure it is zero-terminated. |
| ** Return a pointer to the resulting string. Return a NULL |
| ** pointer if any kind of error was encountered. |
| */ |
| static SQLITE_NOINLINE char *strAccumFinishRealloc(StrAccum *p){ |
| char *zText; |
| assert( p->mxAlloc>0 && !isMalloced(p) ); |
| zText = sqlite3DbMallocRaw(p->db, p->nChar+1 ); |
| if( zText ){ |
| memcpy(zText, p->zText, p->nChar+1); |
| p->printfFlags |= SQLITE_PRINTF_MALLOCED; |
| }else{ |
| setStrAccumError(p, SQLITE_NOMEM); |
| } |
| p->zText = zText; |
| return zText; |
| } |
| char *sqlite3StrAccumFinish(StrAccum *p){ |
| if( p->zText ){ |
| p->zText[p->nChar] = 0; |
| if( p->mxAlloc>0 && !isMalloced(p) ){ |
| return strAccumFinishRealloc(p); |
| } |
| } |
| return p->zText; |
| } |
| |
| /* |
| ** This singleton is an sqlite3_str object that is returned if |
| ** sqlite3_malloc() fails to provide space for a real one. This |
| ** sqlite3_str object accepts no new text and always returns |
| ** an SQLITE_NOMEM error. |
| */ |
| static sqlite3_str sqlite3OomStr = { |
| 0, 0, 0, 0, 0, SQLITE_NOMEM, 0 |
| }; |
| |
| /* Finalize a string created using sqlite3_str_new(). |
| */ |
| char *sqlite3_str_finish(sqlite3_str *p){ |
| char *z; |
| if( p!=0 && p!=&sqlite3OomStr ){ |
| z = sqlite3StrAccumFinish(p); |
| sqlite3_free(p); |
| }else{ |
| z = 0; |
| } |
| return z; |
| } |
| |
| /* Return any error code associated with p */ |
| int sqlite3_str_errcode(sqlite3_str *p){ |
| return p ? p->accError : SQLITE_NOMEM; |
| } |
| |
| /* Return the current length of p in bytes */ |
| int sqlite3_str_length(sqlite3_str *p){ |
| return p ? p->nChar : 0; |
| } |
| |
| /* Return the current value for p */ |
| char *sqlite3_str_value(sqlite3_str *p){ |
| if( p==0 || p->nChar==0 ) return 0; |
| p->zText[p->nChar] = 0; |
| return p->zText; |
| } |
| |
| /* |
| ** Reset an StrAccum string. Reclaim all malloced memory. |
| */ |
| void sqlite3_str_reset(StrAccum *p){ |
| if( isMalloced(p) ){ |
| sqlite3DbFree(p->db, p->zText); |
| p->printfFlags &= ~SQLITE_PRINTF_MALLOCED; |
| } |
| p->nAlloc = 0; |
| p->nChar = 0; |
| p->zText = 0; |
| } |
| |
| /* |
| ** Initialize a string accumulator. |
| ** |
| ** p: The accumulator to be initialized. |
| ** db: Pointer to a database connection. May be NULL. Lookaside |
| ** memory is used if not NULL. db->mallocFailed is set appropriately |
| ** when not NULL. |
| ** zBase: An initial buffer. May be NULL in which case the initial buffer |
| ** is malloced. |
| ** n: Size of zBase in bytes. If total space requirements never exceed |
| ** n then no memory allocations ever occur. |
| ** mx: Maximum number of bytes to accumulate. If mx==0 then no memory |
| ** allocations will ever occur. |
| */ |
| void sqlite3StrAccumInit(StrAccum *p, sqlite3 *db, char *zBase, int n, int mx){ |
| p->zText = zBase; |
| p->db = db; |
| p->nAlloc = n; |
| p->mxAlloc = mx; |
| p->nChar = 0; |
| p->accError = 0; |
| p->printfFlags = 0; |
| } |
| |
| /* Allocate and initialize a new dynamic string object */ |
| sqlite3_str *sqlite3_str_new(sqlite3 *db){ |
| sqlite3_str *p = sqlite3_malloc64(sizeof(*p)); |
| if( p ){ |
| sqlite3StrAccumInit(p, 0, 0, 0, |
| db ? db->aLimit[SQLITE_LIMIT_LENGTH] : SQLITE_MAX_LENGTH); |
| }else{ |
| p = &sqlite3OomStr; |
| } |
| return p; |
| } |
| |
| /* |
| ** Print into memory obtained from sqliteMalloc(). Use the internal |
| ** %-conversion extensions. |
| */ |
| char *sqlite3VMPrintf(sqlite3 *db, const char *zFormat, va_list ap){ |
| char *z; |
| char zBase[SQLITE_PRINT_BUF_SIZE]; |
| StrAccum acc; |
| assert( db!=0 ); |
| sqlite3StrAccumInit(&acc, db, zBase, sizeof(zBase), |
| db->aLimit[SQLITE_LIMIT_LENGTH]); |
| acc.printfFlags = SQLITE_PRINTF_INTERNAL; |
| sqlite3_str_vappendf(&acc, zFormat, ap); |
| z = sqlite3StrAccumFinish(&acc); |
| if( acc.accError==SQLITE_NOMEM ){ |
| sqlite3OomFault(db); |
| } |
| return z; |
| } |
| |
| /* |
| ** Print into memory obtained from sqliteMalloc(). Use the internal |
| ** %-conversion extensions. |
| */ |
| char *sqlite3MPrintf(sqlite3 *db, const char *zFormat, ...){ |
| va_list ap; |
| char *z; |
| va_start(ap, zFormat); |
| z = sqlite3VMPrintf(db, zFormat, ap); |
| va_end(ap); |
| return z; |
| } |
| |
| /* |
| ** Print into memory obtained from sqlite3_malloc(). Omit the internal |
| ** %-conversion extensions. |
| */ |
| char *sqlite3_vmprintf(const char *zFormat, va_list ap){ |
| char *z; |
| char zBase[SQLITE_PRINT_BUF_SIZE]; |
| StrAccum acc; |
| |
| #ifdef SQLITE_ENABLE_API_ARMOR |
| if( zFormat==0 ){ |
| (void)SQLITE_MISUSE_BKPT; |
| return 0; |
| } |
| #endif |
| #ifndef SQLITE_OMIT_AUTOINIT |
| if( sqlite3_initialize() ) return 0; |
| #endif |
| sqlite3StrAccumInit(&acc, 0, zBase, sizeof(zBase), SQLITE_MAX_LENGTH); |
| sqlite3_str_vappendf(&acc, zFormat, ap); |
| z = sqlite3StrAccumFinish(&acc); |
| return z; |
| } |
| |
| /* |
| ** Print into memory obtained from sqlite3_malloc()(). Omit the internal |
| ** %-conversion extensions. |
| */ |
| char *sqlite3_mprintf(const char *zFormat, ...){ |
| va_list ap; |
| char *z; |
| #ifndef SQLITE_OMIT_AUTOINIT |
| if( sqlite3_initialize() ) return 0; |
| #endif |
| va_start(ap, zFormat); |
| z = sqlite3_vmprintf(zFormat, ap); |
| va_end(ap); |
| return z; |
| } |
| |
| /* |
| ** sqlite3_snprintf() works like snprintf() except that it ignores the |
| ** current locale settings. This is important for SQLite because we |
| ** are not able to use a "," as the decimal point in place of "." as |
| ** specified by some locales. |
| ** |
| ** Oops: The first two arguments of sqlite3_snprintf() are backwards |
| ** from the snprintf() standard. Unfortunately, it is too late to change |
| ** this without breaking compatibility, so we just have to live with the |
| ** mistake. |
| ** |
| ** sqlite3_vsnprintf() is the varargs version. |
| */ |
| char *sqlite3_vsnprintf(int n, char *zBuf, const char *zFormat, va_list ap){ |
| StrAccum acc; |
| if( n<=0 ) return zBuf; |
| #ifdef SQLITE_ENABLE_API_ARMOR |
| if( zBuf==0 || zFormat==0 ) { |
| (void)SQLITE_MISUSE_BKPT; |
| if( zBuf ) zBuf[0] = 0; |
| return zBuf; |
| } |
| #endif |
| sqlite3StrAccumInit(&acc, 0, zBuf, n, 0); |
| sqlite3_str_vappendf(&acc, zFormat, ap); |
| zBuf[acc.nChar] = 0; |
| return zBuf; |
| } |
| char *sqlite3_snprintf(int n, char *zBuf, const char *zFormat, ...){ |
| char *z; |
| va_list ap; |
| va_start(ap,zFormat); |
| z = sqlite3_vsnprintf(n, zBuf, zFormat, ap); |
| va_end(ap); |
| return z; |
| } |
| |
| /* |
| ** This is the routine that actually formats the sqlite3_log() message. |
| ** We house it in a separate routine from sqlite3_log() to avoid using |
| ** stack space on small-stack systems when logging is disabled. |
| ** |
| ** sqlite3_log() must render into a static buffer. It cannot dynamically |
| ** allocate memory because it might be called while the memory allocator |
| ** mutex is held. |
| ** |
| ** sqlite3_str_vappendf() might ask for *temporary* memory allocations for |
| ** certain format characters (%q) or for very large precisions or widths. |
| ** Care must be taken that any sqlite3_log() calls that occur while the |
| ** memory mutex is held do not use these mechanisms. |
| */ |
| static void renderLogMsg(int iErrCode, const char *zFormat, va_list ap){ |
| StrAccum acc; /* String accumulator */ |
| char zMsg[SQLITE_PRINT_BUF_SIZE*3]; /* Complete log message */ |
| |
| sqlite3StrAccumInit(&acc, 0, zMsg, sizeof(zMsg), 0); |
| sqlite3_str_vappendf(&acc, zFormat, ap); |
| sqlite3GlobalConfig.xLog(sqlite3GlobalConfig.pLogArg, iErrCode, |
| sqlite3StrAccumFinish(&acc)); |
| } |
| |
| /* |
| ** Format and write a message to the log if logging is enabled. |
| */ |
| void sqlite3_log(int iErrCode, const char *zFormat, ...){ |
| va_list ap; /* Vararg list */ |
| if( sqlite3GlobalConfig.xLog ){ |
| va_start(ap, zFormat); |
| renderLogMsg(iErrCode, zFormat, ap); |
| va_end(ap); |
| } |
| } |
| |
| #if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE) |
| /* |
| ** A version of printf() that understands %lld. Used for debugging. |
| ** The printf() built into some versions of windows does not understand %lld |
| ** and segfaults if you give it a long long int. |
| */ |
| void sqlite3DebugPrintf(const char *zFormat, ...){ |
| va_list ap; |
| StrAccum acc; |
| char zBuf[500]; |
| sqlite3StrAccumInit(&acc, 0, zBuf, sizeof(zBuf), 0); |
| va_start(ap,zFormat); |
| sqlite3_str_vappendf(&acc, zFormat, ap); |
| va_end(ap); |
| sqlite3StrAccumFinish(&acc); |
| #ifdef SQLITE_OS_TRACE_PROC |
| { |
| extern void SQLITE_OS_TRACE_PROC(const char *zBuf, int nBuf); |
| SQLITE_OS_TRACE_PROC(zBuf, sizeof(zBuf)); |
| } |
| #else |
| fprintf(stdout,"%s", zBuf); |
| fflush(stdout); |
| #endif |
| } |
| #endif |
| |
| |
| /* |
| ** variable-argument wrapper around sqlite3_str_vappendf(). The bFlags argument |
| ** can contain the bit SQLITE_PRINTF_INTERNAL enable internal formats. |
| */ |
| void sqlite3_str_appendf(StrAccum *p, const char *zFormat, ...){ |
| va_list ap; |
| va_start(ap,zFormat); |
| sqlite3_str_vappendf(p, zFormat, ap); |
| va_end(ap); |
| } |