blob: b174cf479203956491c78b193c3e120fbbae168c [file] [log] [blame]
<?xml version="1.0" encoding="UTF-8"?>
<protocol name="webos_shell">
<copyright>
Copyright (c) 2013-2020 LG Electronics, Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
SPDX-License-Identifier: Apache-2.0
</copyright>
<interface name="wl_webos_shell" version="1">
<description summary="interface for webOS shell">
This interface provides handlings on webOS shell surfaces.
</description>
<request name="get_system_pip">
<description summary="deprecated request.">
This request is deprecated. If you want to create a new request,
you can reuse this one. FYI, in that case, you also need to modify
get_system_pip method in luna-surfacemanager as well.
</description>
</request>
<request name="get_shell_surface">
<description summary="get a webOS shell surface">
Creates an webOS shell surface for an existing surface.
</description>
<arg name="id" type="new_id" interface="wl_webos_shell_surface"/>
<arg name="surface" type="object" interface="wl_surface"/>
</request>
</interface>
<interface name="wl_webos_shell_surface" version="1">
<description summary="interface to handle webos shell surfaces">
This allows the client to associate an normal surface with a
shell surface. The shell surface provides webOS specific functionality
to surfaces.
</description>
<request name="set_location_hint">
<description summary="sets the preferred location hint">
The location hint is a guideline to the compositor where
to place the surface. The compositor will do its best to
place it there, however this is not guaranteed. Currently
The location hint is only applied to _WEBOS_WINDOW_TYPE_POPUP
and _WEBOS_WINDOW_TYPE_SYSTEM_UI surfaces.
</description>
<arg name="hint" type="uint"/>
</request>
<enum name="location_hint">
<description summary="location mask for the surface">
Using this mask the surface can be positioned onto
different locations on screen. By not using absolute
coordinates we can create greater flexibility in the
compositor and the clients.
</description>
<entry name="north" value="1"/>
<entry name="west" value="2"/>
<entry name="south" value="4"/>
<entry name="east" value="8"/>
<entry name="center" value="16"/>
</enum>
<enum name="state">
<description summary="the state of the surface">
The state provides info to the client on how the compositor has placed
the surface.
The default state will indicate to the client that it is windowed. The
"position_changed" event will tell the position in screen coordinates
when the surface is in this state.
</description>
<entry name="default" value="0"/>
<entry name="minimized" value="1"/>
<entry name="maximized" value="2"/>
<entry name="fullscreen" value="3"/>
</enum>
<event name="state_changed">
<description summary="the surface state was changed">
The compositor or the user has taken action that has resulted in
this surface to change state.
</description>
<arg name="state" type="uint"/>
</event>
<event name="position_changed">
<description summary="the surface position on screen changed">
This event will only be sent the surfaces that are in their default
state. It will be not sent for fullscreen surfaces nor for surfaces
that are minimized.
</description>
<arg name="x" type="int"/>
<arg name="y" type="int"/>
</event>
<event name="close">
<description summary="request closing of window">
The close event is sent when the compositor requests closing
of a window, e.g. through some gesture or other interaction,
without explicitly quitting or killing the client.
</description>
</event>
<request name="set_state">
<description summary="sets the surface state">
The client requests its surface state to the compositor.
</description>
<arg name="state" type="uint"/>
</request>
<request name="set_property">
<description summary="sets the surface property">
The client sets the surface property to the compositor. The property
is given by a string pair (name, value).
</description>
<arg name="name" type="string"/>
<arg name="value" type="string"/>
</request>
<event name="exposed">
<description summary="indicates what areas are exposed">
The array contains non-overlapping rectangles that define
areas that are visible in this surface. The array elements
are a series of ints arranged as follows x,y,w,h,x,y,w,h,-1.
The values will not contain negative numbers and the -1 is
treated as a terminating marker.
</description>
<arg name="rectangles" type="array"/>
</event>
<event name="state_about_to_change">
<description summary="the surface state is about to change">
Be sure that the actual state should not be changed with this.
Client can only prepare that state will be changed.
</description>
<arg name="state" type="uint"/>
</event>
<enum name="webos_key">
<description summary="the key that the surface handles">
The client uses wl_webos_shell_surface.set_key_mask to notify server
that it will handle specific keys only.
</description>
<entry name="home" value="1"/>
<entry name="back" value="2"/>
<entry name="exit" value="4"/>
<entry name="navigation_left" value="8"/>
<entry name="navigation_right" value="16"/>
<entry name="navigation_up" value="32"/>
<entry name="navigation_down" value="64"/>
<entry name="navigation_ok" value="128"/>
<entry name="numeric_keys" value="256"/>
<entry name="remote_color_red" value="512"/>
<entry name="remote_color_green" value="1024"/>
<entry name="remote_color_yellow" value="2048"/>
<entry name="remote_color_blue" value="4096"/>
<entry name="remote_programme_group" value="8192"/>
<entry name="remote_playback_group" value="16384"/>
<entry name="remote_teletext_group" value="32768"/>
<entry name="local_left" value="65536"/>
<entry name="local_right" value="131072"/>
<entry name="local_up" value="262144"/>
<entry name="local_down" value="524288"/>
<entry name="local_ok" value="1048576"/>
<entry name="remote_magnifier_group" value="2097152"/>
<entry name="minimal_playback_group" value="4194304"/>
<entry name="guide" value="8388608"/>
<entry name="default" value="0xFFFFFFF8"/>
</enum>
<request name="set_key_mask">
<description summary="sets the key mask for this surface">
A value of '1' in the mask indicates that the respective key event (both press and release)
will be delivered to the client. Bitwise XOR operation against the default mask value and
a supported individual values will result in that key not being delivered to the client.
Notice that the default value omits certain keys.
The compositor is free to ignore certain keys even if set to '1' depending on the overall
system UI behaviour, most commonly this will mean the HOME key.
NOTE: This protocol will eventually replace the string property based key filtering.
</description>
<arg name="webos_key" type="uint"/>
</request>
</interface>
</protocol>