| /** |
| ****************************************************************************** |
| * @file stm32l5xx_hal_pwr.h |
| * @author MCD Application Team |
| * @brief Header file of PWR HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2019 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32L5xx_HAL_PWR_H |
| #define STM32L5xx_HAL_PWR_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32l5xx_hal_def.h" |
| |
| /** @addtogroup STM32L5xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup PWR |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| |
| /** @defgroup PWR_Exported_Types PWR Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief PWR PVD configuration structure definition |
| */ |
| typedef struct |
| { |
| uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. |
| This parameter can be a value of @ref PWR_PVD_detection_level. */ |
| |
| uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. |
| This parameter can be a value of @ref PWR_PVD_Mode. */ |
| } PWR_PVDTypeDef; |
| |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| |
| /** @defgroup PWR_Exported_Constants PWR Exported Constants |
| * @{ |
| */ |
| |
| |
| /** @defgroup PWR_PVD_detection_level Programmable Voltage Detection levels |
| * @{ |
| */ |
| #define PWR_PVDLEVEL_0 PWR_CR2_PLS_LEV0 /*!< PVD threshold around 2.0 V */ |
| #define PWR_PVDLEVEL_1 PWR_CR2_PLS_LEV1 /*!< PVD threshold around 2.2 V */ |
| #define PWR_PVDLEVEL_2 PWR_CR2_PLS_LEV2 /*!< PVD threshold around 2.4 V */ |
| #define PWR_PVDLEVEL_3 PWR_CR2_PLS_LEV3 /*!< PVD threshold around 2.5 V */ |
| #define PWR_PVDLEVEL_4 PWR_CR2_PLS_LEV4 /*!< PVD threshold around 2.6 V */ |
| #define PWR_PVDLEVEL_5 PWR_CR2_PLS_LEV5 /*!< PVD threshold around 2.8 V */ |
| #define PWR_PVDLEVEL_6 PWR_CR2_PLS_LEV6 /*!< PVD threshold around 2.9 V */ |
| #define PWR_PVDLEVEL_7 PWR_CR2_PLS_LEV7 /*!< External input analog voltage (compared internally to VREFINT) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PWR_PVD_Mode PWR PVD interrupt and event mode |
| * @{ |
| */ |
| #define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< Basic mode is used */ |
| #define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */ |
| #define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */ |
| #define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ |
| #define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */ |
| #define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */ |
| #define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */ |
| /** |
| * @} |
| */ |
| |
| |
| |
| |
| /** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR regulator mode |
| * @{ |
| */ |
| #define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000) /*!< Regulator in main mode */ |
| #define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPR /*!< Regulator in low-power mode */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry |
| * @{ |
| */ |
| #define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) /*!< Wait For Interruption instruction to enter Sleep mode */ |
| #define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) /*!< Wait For Event instruction to enter Sleep mode */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PWR_STOP_mode_entry PWR STOP mode entry |
| * @{ |
| */ |
| #define PWR_STOPENTRY_WFI ((uint8_t)0x01) /*!< Wait For Interruption instruction to enter Stop mode */ |
| #define PWR_STOPENTRY_WFE ((uint8_t)0x02) /*!< Wait For Event instruction to enter Stop mode */ |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup PWR_PVD_EXTI_LINE PWR PVD external interrupt line |
| * @{ |
| */ |
| #define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PWR_PVD_EVENT_LINE PWR PVD event line |
| * @{ |
| */ |
| #define PWR_EVENT_LINE_PVD ((uint32_t)0x00010000) /*!< Event line 16 Connected to the PVD Event Line */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PWR_items PWR items |
| * @brief PWR items to configure attributes on |
| * @{ |
| */ |
| #define PWR_LPM PWR_SECCFGR_LPMSEC /*!< Low power mode */ |
| #define PWR_WKUP PWR_SECCFGR_WUPSEC /*!< All wake-up pins */ |
| #define PWR_WKUP1 PWR_SECCFGR_WUP1SEC /*!< Wake-up pin 1 */ |
| #define PWR_WKUP2 PWR_SECCFGR_WUP2SEC /*!< Wake-up pin 2 */ |
| #define PWR_WKUP3 PWR_SECCFGR_WUP3SEC /*!< Wake-up pin 3 */ |
| #define PWR_WKUP4 PWR_SECCFGR_WUP4SEC /*!< Wake-up pin 4 */ |
| #define PWR_WKUP5 PWR_SECCFGR_WUP5SEC /*!< Wake-up pin 5 */ |
| #define PWR_VDM PWR_SECCFGR_VDMSEC /*!< Voltage Detection and Monitoring */ |
| #define PWR_VB PWR_SECCFGR_VBSEC /*!< VBAT */ |
| #define PWR_APC PWR_SECCFGR_APCSEC /*!< Pull-Up/Down Control */ |
| #define PWR_ALL (PWR_LPM|PWR_WKUP|PWR_WKUP1|PWR_WKUP2|PWR_WKUP3|PWR_WKUP4|PWR_WKUP5| \ |
| PWR_VDM|PWR_VB|PWR_APC) /*!< All of the above */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PWR_attributes PWR attributes |
| * @brief PWR secure/non-secure and privilege/non-privilege attributes |
| * @note secure and non-secure attributes are only available from secure state when the system |
| * implement the security (TZEN=1) |
| * @{ |
| */ |
| #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) |
| #define PWR_SEC (PWR_ATTR_SEC_MASK | 0x00000001U) /*!< Secure attribute */ |
| #define PWR_NSEC (PWR_ATTR_SEC_MASK | 0x00000000U) /*!< Non-secure attribute */ |
| #endif /* __ARM_FEATURE_CMSE */ |
| #define PWR_PRIV (PWR_ATTR_PRIV_MASK | 0x00000002U) /*!< Privilege attribute */ |
| #define PWR_NPRIV (PWR_ATTR_PRIV_MASK | 0x00000000U) /*!< Non-privilege attribute */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup PWR_Exported_Macros PWR Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Check whether or not a specific PWR flag is set. |
| * @param __FLAG__ specifies the flag to check. |
| * This parameter can be one of the following values: |
| * @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event |
| * was received from the WKUP pin 1. |
| * @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event |
| * was received from the WKUP pin 2. |
| * @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event |
| * was received from the WKUP pin 3. |
| * @arg @ref PWR_FLAG_WUF4 Wake Up Flag 4. Indicates that a wakeup event |
| * was received from the WKUP pin 4. |
| * @arg @ref PWR_FLAG_WUF5 Wake Up Flag 5. Indicates that a wakeup event |
| * was received from the WKUP pin 5. |
| * @arg @ref PWR_FLAG_SB StandBy Flag. Indicates that the system |
| * entered StandBy mode. |
| * @arg @ref PWR_FLAG_SMPS_BYPASS_RDY SMPS bypass ready flag. Indicates |
| * SMPS bypass mode now operational. |
| * @arg @ref PWR_FLAG_EXT_SMPS_RDY SMPS external SMPS ready flag. Indicates |
| * external SMPS switch can be closed. |
| * @arg @ref PWR_FLAG_REGLPS Low Power Regulator Started. Indicates whether or not the |
| * low-power regulator is ready. |
| * @arg @ref PWR_FLAG_REGLPF Low Power Regulator Flag. Indicates whether the |
| * regulator is ready in main mode or is in low-power mode. |
| * @arg @ref PWR_FLAG_VOSF Voltage Scaling Flag. Indicates whether the regulator is ready |
| * in the selected voltage range or is still changing to the required voltage level. |
| * @arg @ref PWR_FLAG_PVDO Power Voltage Detector Output. Indicates whether VDD voltage is |
| * below or above the selected PVD threshold. |
| * @arg @ref PWR_FLAG_PVMO1 Peripheral Voltage Monitoring Output 1. Indicates whether VDDUSB voltage is |
| * is below or above PVM1 threshold (applicable when USB feature is supported). |
| * @arg @ref PWR_FLAG_PVMO2 Peripheral Voltage Monitoring Output 2. Indicates whether VDDIO2 voltage is |
| * is below or above PVM2 threshold (applicable when VDDIO2 is present on device). |
| * @arg @ref PWR_FLAG_PVMO3 Peripheral Voltage Monitoring Output 3. Indicates whether VDDA voltage is |
| * is below or above PVM3 threshold. |
| * @arg @ref PWR_FLAG_PVMO4 Peripheral Voltage Monitoring Output 4. Indicates whether VDDA voltage is |
| * is below or above PVM4 threshold. |
| * |
| * @retval The new state of __FLAG__ (TRUE or FALSE). |
| */ |
| #define __HAL_PWR_GET_FLAG(__FLAG__) ( ((((uint8_t)(__FLAG__)) >> 5U) == 1) ?\ |
| (PWR->SR1 & (1U << ((__FLAG__) & 31U))) :\ |
| (PWR->SR2 & (1U << ((__FLAG__) & 31U))) ) |
| |
| /** @brief Clear a specific PWR flag. |
| * @param __FLAG__ specifies the flag to clear. |
| * This parameter can be one of the following values: |
| * @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event |
| * was received from the WKUP pin 1. |
| * @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event |
| * was received from the WKUP pin 2. |
| * @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event |
| * was received from the WKUP pin 3. |
| * @arg @ref PWR_FLAG_WUF4 Wake Up Flag 4. Indicates that a wakeup event |
| * was received from the WKUP pin 4. |
| * @arg @ref PWR_FLAG_WUF5 Wake Up Flag 5. Indicates that a wakeup event |
| * was received from the WKUP pin 5. |
| * @arg @ref PWR_FLAG_WU Encompasses all five Wake Up Flags. |
| * @arg @ref PWR_FLAG_SB Standby Flag. Indicates that the system |
| * entered Standby mode. |
| * @retval None |
| */ |
| #define __HAL_PWR_CLEAR_FLAG(__FLAG__) ( (((uint8_t)(__FLAG__)) == PWR_FLAG_WU) ?\ |
| (PWR->SCR = (__FLAG__)) :\ |
| (PWR->SCR = (1U << ((__FLAG__) & 31U))) ) |
| /** |
| * @brief Enable the PVD Extended Interrupt Line. |
| * @retval None |
| */ |
| #define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) |
| |
| /** |
| * @brief Disable the PVD Extended Interrupt Line. |
| * @retval None |
| */ |
| #define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) |
| |
| /** |
| * @brief Enable the PVD Event Line. |
| * @retval None |
| */ |
| #define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) |
| |
| /** |
| * @brief Disable the PVD Event Line. |
| * @retval None |
| */ |
| #define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) |
| |
| /** |
| * @brief Enable the PVD Extended Interrupt Rising Trigger. |
| * @retval None |
| */ |
| #define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) |
| |
| /** |
| * @brief Disable the PVD Extended Interrupt Rising Trigger. |
| * @retval None |
| */ |
| #define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) |
| |
| /** |
| * @brief Enable the PVD Extended Interrupt Falling Trigger. |
| * @retval None |
| */ |
| #define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) |
| |
| |
| /** |
| * @brief Disable the PVD Extended Interrupt Falling Trigger. |
| * @retval None |
| */ |
| #define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) |
| |
| |
| /** |
| * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger. |
| * @retval None |
| */ |
| #define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ |
| do { \ |
| __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \ |
| __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \ |
| } while(0) |
| |
| /** |
| * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. |
| * @retval None |
| */ |
| #define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ |
| do { \ |
| __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ |
| __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ |
| } while(0) |
| |
| /** |
| * @brief Generate a Software interrupt on selected EXTI line. |
| * @retval None |
| */ |
| #define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD) |
| |
| /** |
| * @brief Check whether or not the PVD EXTI interrupt flag is set. |
| * @retval EXTI PVD Line Status. |
| */ |
| #define __HAL_PWR_PVD_EXTI_GET_FLAG() ((EXTI->RPR1 | EXTI->FPR1) & PWR_EXTI_LINE_PVD) |
| |
| /** |
| * @brief Clear the PVD EXTI interrupt flag. |
| * @retval None |
| */ |
| #define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() \ |
| do { \ |
| WRITE_REG(EXTI->RPR1, PWR_EXTI_LINE_PVD); \ |
| WRITE_REG(EXTI->FPR1, PWR_EXTI_LINE_PVD); \ |
| } while(0) |
| |
| /** |
| * @} |
| */ |
| |
| /* Private constants -----------------------------------------------------*/ |
| /** @addtogroup PWR_Private_Constants PWR Private Constants |
| * @{ |
| */ |
| /* Defines for attributes */ |
| #define PWR_ATTR_SEC_MASK 0x100U |
| #define PWR_ATTR_PRIV_MASK 0x200U |
| /** |
| * @} |
| */ |
| |
| /* Private macros --------------------------------------------------------*/ |
| /** @addtogroup PWR_Private_Macros PWR Private Macros |
| * @{ |
| */ |
| |
| #define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ |
| ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ |
| ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ |
| ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) |
| |
| #define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_NORMAL) ||\ |
| ((MODE) == PWR_PVD_MODE_IT_RISING) ||\ |
| ((MODE) == PWR_PVD_MODE_IT_FALLING) ||\ |
| ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) ||\ |
| ((MODE) == PWR_PVD_MODE_EVENT_RISING) ||\ |
| ((MODE) == PWR_PVD_MODE_EVENT_FALLING) ||\ |
| ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING)) |
| |
| #define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ |
| ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) |
| |
| #define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) |
| |
| #define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE) ) |
| |
| #define IS_PWR_ITEMS_ATTRIBUTES(__ITEM__) ((((__ITEM__) & PWR_LPM) == PWR_LPM) || \ |
| (((__ITEM__) & PWR_WKUP) == PWR_WKUP) || \ |
| (((__ITEM__) & PWR_WKUP1) == PWR_WKUP1) || \ |
| (((__ITEM__) & PWR_WKUP2) == PWR_WKUP2) || \ |
| (((__ITEM__) & PWR_WKUP3) == PWR_WKUP3) || \ |
| (((__ITEM__) & PWR_WKUP4) == PWR_WKUP4) || \ |
| (((__ITEM__) & PWR_WKUP5) == PWR_WKUP5) || \ |
| (((__ITEM__) & PWR_VDM) == PWR_VDM) || \ |
| (((__ITEM__) & PWR_VB) == PWR_VB) || \ |
| (((__ITEM__) & PWR_APC) == PWR_APC) || \ |
| (((__ITEM__) & PWR_ALL) == PWR_ALL) || \ |
| (((__ITEM__) & ~(PWR_ALL)) == 0U)) |
| |
| #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) |
| |
| #define IS_PWR_ATTRIBUTES(__ATTRIBUTES__) (((((__ATTRIBUTES__) & PWR_SEC) == PWR_SEC) || \ |
| (((__ATTRIBUTES__) & PWR_NSEC) == PWR_NSEC) || \ |
| (((__ATTRIBUTES__) & PWR_PRIV) == PWR_PRIV) || \ |
| (((__ATTRIBUTES__) & PWR_NPRIV) == PWR_NPRIV)) && \ |
| (((__ATTRIBUTES__) & ~(PWR_SEC|PWR_NSEC|PWR_PRIV|PWR_NPRIV)) == 0U)) |
| |
| #else |
| |
| #define IS_PWR_ATTRIBUTES(__ATTRIBUTES__) (((((__ATTRIBUTES__) & PWR_PRIV) == PWR_PRIV) || \ |
| (((__ATTRIBUTES__) & PWR_NPRIV) == PWR_NPRIV)) && \ |
| (((__ATTRIBUTES__) & ~(PWR_PRIV|PWR_NPRIV)) == 0U)) |
| |
| #endif /* __ARM_FEATURE_CMSE */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Include PWR HAL Extended module */ |
| #include "stm32l5xx_hal_pwr_ex.h" |
| |
| /* Exported functions --------------------------------------------------------*/ |
| |
| /** @addtogroup PWR_Exported_Functions PWR Exported Functions |
| * @{ |
| */ |
| |
| /** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions |
| * @{ |
| */ |
| |
| /* Initialization and de-initialization functions *******************************/ |
| void HAL_PWR_DeInit(void); |
| void HAL_PWR_EnableBkUpAccess(void); |
| void HAL_PWR_DisableBkUpAccess(void); |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions |
| * @{ |
| */ |
| |
| /* Peripheral Control functions ************************************************/ |
| HAL_StatusTypeDef HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); |
| void HAL_PWR_EnablePVD(void); |
| void HAL_PWR_DisablePVD(void); |
| |
| |
| /* WakeUp pins configuration functions ****************************************/ |
| void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity); |
| void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); |
| |
| /* Low Power modes configuration functions ************************************/ |
| void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); |
| void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); |
| void HAL_PWR_EnterSTANDBYMode(void); |
| |
| void HAL_PWR_EnableSleepOnExit(void); |
| void HAL_PWR_DisableSleepOnExit(void); |
| void HAL_PWR_EnableSEVOnPend(void); |
| void HAL_PWR_DisableSEVOnPend(void); |
| |
| void HAL_PWR_PVDCallback(void); |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup RCC_Exported_Functions_Group3 Attributes management functions |
| * @{ |
| */ |
| |
| /* Attributes management functions ******************************************/ |
| void HAL_PWR_ConfigAttributes(uint32_t Item, uint32_t Attributes); |
| HAL_StatusTypeDef HAL_PWR_GetConfigAttributes(uint32_t Item, uint32_t *pAttributes); |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| |
| #endif /* STM32L5xx_HAL_PWR_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
