| /** |
| ****************************************************************************** |
| * @file stm32l5xx_hal_hash_ex.c |
| * @author MCD Application Team |
| * @brief Extended HASH HAL module driver. |
| * This file provides firmware functions to manage the following |
| * functionalities of the HASH peripheral for SHA-224 and SHA-256 |
| * alogrithms: |
| * + HASH or HMAC processing in polling mode |
| * + HASH or HMAC processing in interrupt mode |
| * + HASH or HMAC processing in DMA mode |
| * Additionally, this file provides functions to manage HMAC |
| * multi-buffer DMA-based processing for MD-5, SHA-1, SHA-224 |
| * and SHA-256. |
| * |
| * |
| @verbatim |
| =============================================================================== |
| ##### HASH peripheral extended features ##### |
| =============================================================================== |
| [..] |
| The SHA-224 and SHA-256 HASH and HMAC processing can be carried out exactly |
| the same way as for SHA-1 or MD-5 algorithms. |
| (#) Three modes are available. |
| (##) Polling mode: processing APIs are blocking functions |
| i.e. they process the data and wait till the digest computation is finished, |
| e.g. HAL_HASHEx_xxx_Start() |
| (##) Interrupt mode: processing APIs are not blocking functions |
| i.e. they process the data under interrupt, |
| e.g. HAL_HASHEx_xxx_Start_IT() |
| (##) DMA mode: processing APIs are not blocking functions and the CPU is |
| not used for data transfer i.e. the data transfer is ensured by DMA, |
| e.g. HAL_HASHEx_xxx_Start_DMA(). Note that in DMA mode, a call to |
| HAL_HASHEx_xxx_Finish() is then required to retrieve the digest. |
| |
| (#)Multi-buffer processing is possible in polling, interrupt and DMA modes. |
| (##) In polling mode, only multi-buffer HASH processing is possible. |
| API HAL_HASHEx_xxx_Accumulate() must be called for each input buffer, except for the last one. |
| User must resort to HAL_HASHEx_xxx_Accumulate_End() to enter the last one and retrieve as |
| well the computed digest. |
| |
| (##) In interrupt mode, API HAL_HASHEx_xxx_Accumulate_IT() must be called for each input buffer, |
| except for the last one. |
| User must resort to HAL_HASHEx_xxx_Accumulate_End_IT() to enter the last one and retrieve as |
| well the computed digest. |
| |
| (##) In DMA mode, multi-buffer HASH and HMAC processing are possible. |
| |
| (+++) HASH processing: once initialization is done, MDMAT bit must be set thru __HAL_HASH_SET_MDMAT() macro. |
| From that point, each buffer can be fed to the Peripheral thru HAL_HASHEx_xxx_Start_DMA() API. |
| Before entering the last buffer, reset the MDMAT bit with __HAL_HASH_RESET_MDMAT() |
| macro then wrap-up the HASH processing in feeding the last input buffer thru the |
| same API HAL_HASHEx_xxx_Start_DMA(). The digest can then be retrieved with a call to |
| API HAL_HASHEx_xxx_Finish(). |
| |
| (+++) HMAC processing (MD-5, SHA-1, SHA-224 and SHA-256 must all resort to |
| extended functions): after initialization, the key and the first input buffer are entered |
| in the Peripheral with the API HAL_HMACEx_xxx_Step1_2_DMA(). This carries out HMAC step 1 and |
| starts step 2. |
| The following buffers are next entered with the API HAL_HMACEx_xxx_Step2_DMA(). At this |
| point, the HMAC processing is still carrying out step 2. |
| Then, step 2 for the last input buffer and step 3 are carried out by a single call |
| to HAL_HMACEx_xxx_Step2_3_DMA(). |
| |
| The digest can finally be retrieved with a call to API HAL_HASH_xxx_Finish() for |
| MD-5 and SHA-1, to HAL_HASHEx_xxx_Finish() for SHA-224 and SHA-256. |
| |
| |
| @endverbatim |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2018 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32l5xx_hal.h" |
| |
| |
| |
| |
| /** @addtogroup STM32L5xx_HAL_Driver |
| * @{ |
| */ |
| #if defined (HASH) |
| |
| /** @defgroup HASHEx HASHEx |
| * @brief HASH HAL extended module driver. |
| * @{ |
| */ |
| #ifdef HAL_HASH_MODULE_ENABLED |
| /* Private typedef -----------------------------------------------------------*/ |
| /* Private define ------------------------------------------------------------*/ |
| /* Private functions ---------------------------------------------------------*/ |
| #if defined (HASH_CR_MDMAT) |
| |
| /** @defgroup HASHEx_Exported_Functions HASH Extended Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup HASHEx_Exported_Functions_Group1 HASH extended processing functions in polling mode |
| * @brief HASH extended processing functions using polling mode. |
| * |
| @verbatim |
| =============================================================================== |
| ##### Polling mode HASH extended processing functions ##### |
| =============================================================================== |
| [..] This section provides functions allowing to calculate in polling mode |
| the hash value using one of the following algorithms: |
| (+) SHA224 |
| (++) HAL_HASHEx_SHA224_Start() |
| (++) HAL_HASHEx_SHA224_Accmlt() |
| (++) HAL_HASHEx_SHA224_Accmlt_End() |
| (+) SHA256 |
| (++) HAL_HASHEx_SHA256_Start() |
| (++) HAL_HASHEx_SHA256_Accmlt() |
| (++) HAL_HASHEx_SHA256_Accmlt_End() |
| |
| [..] For a single buffer to be hashed, user can resort to HAL_HASH_xxx_Start(). |
| |
| [..] In case of multi-buffer HASH processing (a single digest is computed while |
| several buffers are fed to the Peripheral), the user can resort to successive calls |
| to HAL_HASHEx_xxx_Accumulate() and wrap-up the digest computation by a call |
| to HAL_HASHEx_xxx_Accumulate_End(). |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| |
| /** |
| * @brief Initialize the HASH peripheral in SHA224 mode, next process pInBuffer then |
| * read the computed digest. |
| * @note Digest is available in pOutBuffer. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @param pOutBuffer pointer to the computed digest. Digest size is 28 bytes. |
| * @param Timeout Timeout value |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout) |
| { |
| return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA224); |
| } |
| |
| /** |
| * @brief If not already done, initialize the HASH peripheral in SHA224 mode then |
| * processes pInBuffer. |
| * @note Consecutive calls to HAL_HASHEx_SHA224_Accmlt() can be used to feed |
| * several input buffers back-to-back to the Peripheral that will yield a single |
| * HASH signature once all buffers have been entered. Wrap-up of input |
| * buffers feeding and retrieval of digest is done by a call to |
| * HAL_HASHEx_SHA224_Accmlt_End(). |
| * @note Field hhash->Phase of HASH handle is tested to check whether or not |
| * the Peripheral has already been initialized. |
| * @note Digest is not retrieved by this API, user must resort to HAL_HASHEx_SHA224_Accmlt_End() |
| * to read it, feeding at the same time the last input buffer to the Peripheral. |
| * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the |
| * HASH digest computation is corrupted. Only HAL_HASHEx_SHA224_Accmlt_End() is able |
| * to manage the ending buffer with a length in bytes not a multiple of 4. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes, must be a multiple of 4. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| return HASH_Accumulate(hhash, pInBuffer, Size,HASH_ALGOSELECTION_SHA224); |
| } |
| |
| /** |
| * @brief End computation of a single HASH signature after several calls to HAL_HASHEx_SHA224_Accmlt() API. |
| * @note Digest is available in pOutBuffer. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @param pOutBuffer pointer to the computed digest. Digest size is 28 bytes. |
| * @param Timeout Timeout value |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout) |
| { |
| return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA224); |
| } |
| |
| /** |
| * @brief Initialize the HASH peripheral in SHA256 mode, next process pInBuffer then |
| * read the computed digest. |
| * @note Digest is available in pOutBuffer. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @param pOutBuffer pointer to the computed digest. Digest size is 32 bytes. |
| * @param Timeout Timeout value |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout) |
| { |
| return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA256); |
| } |
| |
| /** |
| * @brief If not already done, initialize the HASH peripheral in SHA256 mode then |
| * processes pInBuffer. |
| * @note Consecutive calls to HAL_HASHEx_SHA256_Accmlt() can be used to feed |
| * several input buffers back-to-back to the Peripheral that will yield a single |
| * HASH signature once all buffers have been entered. Wrap-up of input |
| * buffers feeding and retrieval of digest is done by a call to |
| * HAL_HASHEx_SHA256_Accmlt_End(). |
| * @note Field hhash->Phase of HASH handle is tested to check whether or not |
| * the Peripheral has already been initialized. |
| * @note Digest is not retrieved by this API, user must resort to HAL_HASHEx_SHA256_Accmlt_End() |
| * to read it, feeding at the same time the last input buffer to the Peripheral. |
| * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the |
| * HASH digest computation is corrupted. Only HAL_HASHEx_SHA256_Accmlt_End() is able |
| * to manage the ending buffer with a length in bytes not a multiple of 4. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes, must be a multiple of 4. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| return HASH_Accumulate(hhash, pInBuffer, Size,HASH_ALGOSELECTION_SHA256); |
| } |
| |
| /** |
| * @brief End computation of a single HASH signature after several calls to HAL_HASHEx_SHA256_Accmlt() API. |
| * @note Digest is available in pOutBuffer. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @param pOutBuffer pointer to the computed digest. Digest size is 32 bytes. |
| * @param Timeout Timeout value |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout) |
| { |
| return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA256); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup HASHEx_Exported_Functions_Group2 HASH extended processing functions in interrupt mode |
| * @brief HASH extended processing functions using interrupt mode. |
| * |
| @verbatim |
| =============================================================================== |
| ##### Interruption mode HASH extended processing functions ##### |
| =============================================================================== |
| [..] This section provides functions allowing to calculate in interrupt mode |
| the hash value using one of the following algorithms: |
| (+) SHA224 |
| (++) HAL_HASHEx_SHA224_Start_IT() |
| (++) HAL_HASHEx_SHA224_Accmlt_IT() |
| (++) HAL_HASHEx_SHA224_Accmlt_End_IT() |
| (+) SHA256 |
| (++) HAL_HASHEx_SHA256_Start_IT() |
| (++) HAL_HASHEx_SHA256_Accmlt_IT() |
| (++) HAL_HASHEx_SHA256_Accmlt_End_IT() |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| |
| /** |
| * @brief Initialize the HASH peripheral in SHA224 mode, next process pInBuffer then |
| * read the computed digest in interruption mode. |
| * @note Digest is available in pOutBuffer. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @param pOutBuffer pointer to the computed digest. Digest size is 28 bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer) |
| { |
| return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer,HASH_ALGOSELECTION_SHA224); |
| } |
| |
| /** |
| * @brief If not already done, initialize the HASH peripheral in SHA224 mode then |
| * processes pInBuffer in interruption mode. |
| * @note Consecutive calls to HAL_HASHEx_SHA224_Accmlt_IT() can be used to feed |
| * several input buffers back-to-back to the Peripheral that will yield a single |
| * HASH signature once all buffers have been entered. Wrap-up of input |
| * buffers feeding and retrieval of digest is done by a call to |
| * HAL_HASHEx_SHA224_Accmlt_End_IT(). |
| * @note Field hhash->Phase of HASH handle is tested to check whether or not |
| * the Peripheral has already been initialized. |
| * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the |
| * HASH digest computation is corrupted. Only HAL_HASHEx_SHA224_Accmlt_End_IT() is able |
| * to manage the ending buffer with a length in bytes not a multiple of 4. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes, must be a multiple of 4. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| return HASH_Accumulate_IT(hhash, pInBuffer, Size,HASH_ALGOSELECTION_SHA224); |
| } |
| |
| /** |
| * @brief End computation of a single HASH signature after several calls to HAL_HASHEx_SHA224_Accmlt_IT() API. |
| * @note Digest is available in pOutBuffer. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @param pOutBuffer pointer to the computed digest. Digest size is 28 bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer) |
| { |
| return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer,HASH_ALGOSELECTION_SHA224); |
| } |
| |
| /** |
| * @brief Initialize the HASH peripheral in SHA256 mode, next process pInBuffer then |
| * read the computed digest in interruption mode. |
| * @note Digest is available in pOutBuffer. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @param pOutBuffer pointer to the computed digest. Digest size is 32 bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer) |
| { |
| return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer,HASH_ALGOSELECTION_SHA256); |
| } |
| |
| /** |
| * @brief If not already done, initialize the HASH peripheral in SHA256 mode then |
| * processes pInBuffer in interruption mode. |
| * @note Consecutive calls to HAL_HASHEx_SHA256_Accmlt_IT() can be used to feed |
| * several input buffers back-to-back to the Peripheral that will yield a single |
| * HASH signature once all buffers have been entered. Wrap-up of input |
| * buffers feeding and retrieval of digest is done by a call to |
| * HAL_HASHEx_SHA256_Accmlt_End_IT(). |
| * @note Field hhash->Phase of HASH handle is tested to check whether or not |
| * the Peripheral has already been initialized. |
| * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the |
| * HASH digest computation is corrupted. Only HAL_HASHEx_SHA256_Accmlt_End_IT() is able |
| * to manage the ending buffer with a length in bytes not a multiple of 4. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes, must be a multiple of 4. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| return HASH_Accumulate_IT(hhash, pInBuffer, Size,HASH_ALGOSELECTION_SHA256); |
| } |
| |
| /** |
| * @brief End computation of a single HASH signature after several calls to HAL_HASHEx_SHA256_Accmlt_IT() API. |
| * @note Digest is available in pOutBuffer. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @param pOutBuffer pointer to the computed digest. Digest size is 32 bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer) |
| { |
| return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer,HASH_ALGOSELECTION_SHA256); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup HASHEx_Exported_Functions_Group3 HASH extended processing functions in DMA mode |
| * @brief HASH extended processing functions using DMA mode. |
| * |
| @verbatim |
| =============================================================================== |
| ##### DMA mode HASH extended processing functionss ##### |
| =============================================================================== |
| [..] This section provides functions allowing to calculate in DMA mode |
| the hash value using one of the following algorithms: |
| (+) SHA224 |
| (++) HAL_HASHEx_SHA224_Start_DMA() |
| (++) HAL_HASHEx_SHA224_Finish() |
| (+) SHA256 |
| (++) HAL_HASHEx_SHA256_Start_DMA() |
| (++) HAL_HASHEx_SHA256_Finish() |
| |
| [..] When resorting to DMA mode to enter the data in the Peripheral, user must resort |
| to HAL_HASHEx_xxx_Start_DMA() then read the resulting digest with |
| HAL_HASHEx_xxx_Finish(). |
| |
| [..] In case of multi-buffer HASH processing, MDMAT bit must first be set before |
| the successive calls to HAL_HASHEx_xxx_Start_DMA(). Then, MDMAT bit needs to be |
| reset before the last call to HAL_HASHEx_xxx_Start_DMA(). Digest is finally |
| retrieved thanks to HAL_HASHEx_xxx_Finish(). |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| |
| |
| |
| /** |
| * @brief Initialize the HASH peripheral in SHA224 mode then initiate a DMA transfer |
| * to feed the input buffer to the Peripheral. |
| * @note Once the DMA transfer is finished, HAL_HASHEx_SHA224_Finish() API must |
| * be called to retrieve the computed digest. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| return HASH_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224); |
| } |
| |
| /** |
| * @brief Return the computed digest in SHA224 mode. |
| * @note The API waits for DCIS to be set then reads the computed digest. |
| * @note HAL_HASHEx_SHA224_Finish() can be used as well to retrieve the digest in |
| * HMAC SHA224 mode. |
| * @param hhash HASH handle. |
| * @param pOutBuffer pointer to the computed digest. Digest size is 28 bytes. |
| * @param Timeout Timeout value. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout) |
| { |
| return HASH_Finish(hhash, pOutBuffer, Timeout); |
| } |
| |
| /** |
| * @brief Initialize the HASH peripheral in SHA256 mode then initiate a DMA transfer |
| * to feed the input buffer to the Peripheral. |
| * @note Once the DMA transfer is finished, HAL_HASHEx_SHA256_Finish() API must |
| * be called to retrieve the computed digest. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| return HASH_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256); |
| } |
| |
| /** |
| * @brief Return the computed digest in SHA256 mode. |
| * @note The API waits for DCIS to be set then reads the computed digest. |
| * @note HAL_HASHEx_SHA256_Finish() can be used as well to retrieve the digest in |
| * HMAC SHA256 mode. |
| * @param hhash HASH handle. |
| * @param pOutBuffer pointer to the computed digest. Digest size is 32 bytes. |
| * @param Timeout Timeout value. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout) |
| { |
| return HASH_Finish(hhash, pOutBuffer, Timeout); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup HASHEx_Exported_Functions_Group4 HMAC extended processing functions in polling mode |
| * @brief HMAC extended processing functions using polling mode. |
| * |
| @verbatim |
| =============================================================================== |
| ##### Polling mode HMAC extended processing functions ##### |
| =============================================================================== |
| [..] This section provides functions allowing to calculate in polling mode |
| the HMAC value using one of the following algorithms: |
| (+) SHA224 |
| (++) HAL_HMACEx_SHA224_Start() |
| (+) SHA256 |
| (++) HAL_HMACEx_SHA256_Start() |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| |
| |
| /** |
| * @brief Initialize the HASH peripheral in HMAC SHA224 mode, next process pInBuffer then |
| * read the computed digest. |
| * @note Digest is available in pOutBuffer. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @param pOutBuffer pointer to the computed digest. Digest size is 28 bytes. |
| * @param Timeout Timeout value. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout) |
| { |
| return HMAC_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA224); |
| } |
| |
| /** |
| * @brief Initialize the HASH peripheral in HMAC SHA256 mode, next process pInBuffer then |
| * read the computed digest. |
| * @note Digest is available in pOutBuffer. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @param pOutBuffer pointer to the computed digest. Digest size is 32 bytes. |
| * @param Timeout Timeout value. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout) |
| { |
| return HMAC_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA256); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup HASHEx_Exported_Functions_Group5 HMAC extended processing functions in interrupt mode |
| * @brief HMAC extended processing functions using interruption mode. |
| * |
| @verbatim |
| =============================================================================== |
| ##### Interrupt mode HMAC extended processing functions ##### |
| =============================================================================== |
| [..] This section provides functions allowing to calculate in interrupt mode |
| the HMAC value using one of the following algorithms: |
| (+) SHA224 |
| (++) HAL_HMACEx_SHA224_Start_IT() |
| (+) SHA256 |
| (++) HAL_HMACEx_SHA256_Start_IT() |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| |
| |
| /** |
| * @brief Initialize the HASH peripheral in HMAC SHA224 mode, next process pInBuffer then |
| * read the computed digest in interrupt mode. |
| * @note Digest is available in pOutBuffer. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @param pOutBuffer pointer to the computed digest. Digest size is 28 bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer) |
| { |
| return HMAC_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA224); |
| } |
| |
| /** |
| * @brief Initialize the HASH peripheral in HMAC SHA256 mode, next process pInBuffer then |
| * read the computed digest in interrupt mode. |
| * @note Digest is available in pOutBuffer. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @param pOutBuffer pointer to the computed digest. Digest size is 32 bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer) |
| { |
| return HMAC_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA256); |
| } |
| |
| |
| |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup HASHEx_Exported_Functions_Group6 HMAC extended processing functions in DMA mode |
| * @brief HMAC extended processing functions using DMA mode. |
| * |
| @verbatim |
| =============================================================================== |
| ##### DMA mode HMAC extended processing functions ##### |
| =============================================================================== |
| [..] This section provides functions allowing to calculate in DMA mode |
| the HMAC value using one of the following algorithms: |
| (+) SHA224 |
| (++) HAL_HMACEx_SHA224_Start_DMA() |
| (+) SHA256 |
| (++) HAL_HMACEx_SHA256_Start_DMA() |
| |
| [..] When resorting to DMA mode to enter the data in the Peripheral for HMAC processing, |
| user must resort to HAL_HMACEx_xxx_Start_DMA() then read the resulting digest |
| with HAL_HASHEx_xxx_Finish(). |
| |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| |
| |
| /** |
| * @brief Initialize the HASH peripheral in HMAC SHA224 mode then initiate the required |
| * DMA transfers to feed the key and the input buffer to the Peripheral. |
| * @note Once the DMA transfers are finished (indicated by hhash->State set back |
| * to HAL_HASH_STATE_READY), HAL_HASHEx_SHA224_Finish() API must be called to retrieve |
| * the computed digest. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @note If MDMAT bit is set before calling this function (multi-buffer |
| * HASH processing case), the input buffer size (in bytes) must be |
| * a multiple of 4 otherwise, the HASH digest computation is corrupted. |
| * For the processing of the last buffer of the thread, MDMAT bit must |
| * be reset and the buffer length (in bytes) doesn't have to be a |
| * multiple of 4. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224); |
| } |
| |
| /** |
| * @brief Initialize the HASH peripheral in HMAC SHA224 mode then initiate the required |
| * DMA transfers to feed the key and the input buffer to the Peripheral. |
| * @note Once the DMA transfers are finished (indicated by hhash->State set back |
| * to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve |
| * the computed digest. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @note If MDMAT bit is set before calling this function (multi-buffer |
| * HASH processing case), the input buffer size (in bytes) must be |
| * a multiple of 4 otherwise, the HASH digest computation is corrupted. |
| * For the processing of the last buffer of the thread, MDMAT bit must |
| * be reset and the buffer length (in bytes) doesn't have to be a |
| * multiple of 4. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (buffer to be hashed). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256); |
| } |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup HASHEx_Exported_Functions_Group7 Multi-buffer HMAC extended processing functions in DMA mode |
| * @brief HMAC extended processing functions in multi-buffer DMA mode. |
| * |
| @verbatim |
| =============================================================================== |
| ##### Multi-buffer DMA mode HMAC extended processing functions ##### |
| =============================================================================== |
| [..] This section provides functions to manage HMAC multi-buffer |
| DMA-based processing for MD5, SHA1, SHA224 and SHA256 algorithms. |
| (+) MD5 |
| (++) HAL_HMACEx_MD5_Step1_2_DMA() |
| (++) HAL_HMACEx_MD5_Step2_DMA() |
| (++) HAL_HMACEx_MD5_Step2_3_DMA() |
| (+) SHA1 |
| (++) HAL_HMACEx_SHA1_Step1_2_DMA() |
| (++) HAL_HMACEx_SHA1_Step2_DMA() |
| (++) HAL_HMACEx_SHA1_Step2_3_DMA() |
| |
| (+) SHA256 |
| (++) HAL_HMACEx_SHA224_Step1_2_DMA() |
| (++) HAL_HMACEx_SHA224_Step2_DMA() |
| (++) HAL_HMACEx_SHA224_Step2_3_DMA() |
| (+) SHA256 |
| (++) HAL_HMACEx_SHA256_Step1_2_DMA() |
| (++) HAL_HMACEx_SHA256_Step2_DMA() |
| (++) HAL_HMACEx_SHA256_Step2_3_DMA() |
| |
| [..] User must first start-up the multi-buffer DMA-based HMAC computation in |
| calling HAL_HMACEx_xxx_Step1_2_DMA(). This carries out HMAC step 1 and |
| intiates step 2 with the first input buffer. |
| |
| [..] The following buffers are next fed to the Peripheral with a call to the API |
| HAL_HMACEx_xxx_Step2_DMA(). There may be several consecutive calls |
| to this API. |
| |
| [..] Multi-buffer DMA-based HMAC computation is wrapped up by a call to |
| HAL_HMACEx_xxx_Step2_3_DMA(). This finishes step 2 in feeding the last input |
| buffer to the Peripheral then carries out step 3. |
| |
| [..] Digest is retrieved by a call to HAL_HASH_xxx_Finish() for MD-5 or |
| SHA-1, to HAL_HASHEx_xxx_Finish() for SHA-224 or SHA-256. |
| |
| [..] If only two buffers need to be consecutively processed, a call to |
| HAL_HMACEx_xxx_Step1_2_DMA() followed by a call to HAL_HMACEx_xxx_Step2_3_DMA() |
| is sufficient. |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| /** |
| * @brief MD5 HMAC step 1 completion and step 2 start in multi-buffer DMA mode. |
| * @note Step 1 consists in writing the inner hash function key in the Peripheral, |
| * step 2 consists in writing the message text. |
| * @note The API carries out the HMAC step 1 then starts step 2 with |
| * the first buffer entered to the Peripheral. DCAL bit is not automatically set after |
| * the message buffer feeding, allowing other messages DMA transfers to occur. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the |
| * HASH digest computation is corrupted. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (message buffer). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_MD5_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| hhash->DigestCalculationDisable = SET; |
| return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5); |
| } |
| |
| /** |
| * @brief MD5 HMAC step 2 in multi-buffer DMA mode. |
| * @note Step 2 consists in writing the message text in the Peripheral. |
| * @note The API carries on the HMAC step 2, applied to the buffer entered as input |
| * parameter. DCAL bit is not automatically set after the message buffer feeding, |
| * allowing other messages DMA transfers to occur. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the |
| * HASH digest computation is corrupted. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (message buffer). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_MD5_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| if (hhash->DigestCalculationDisable != SET) |
| { |
| return HAL_ERROR; |
| } |
| return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5); |
| } |
| |
| /** |
| * @brief MD5 HMAC step 2 wrap-up and step 3 completion in multi-buffer DMA mode. |
| * @note Step 2 consists in writing the message text in the Peripheral, |
| * step 3 consists in writing the outer hash function key. |
| * @note The API wraps up the HMAC step 2 in processing the buffer entered as input |
| * parameter (the input buffer must be the last one of the multi-buffer thread) |
| * then carries out HMAC step 3. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @note Once the DMA transfers are finished (indicated by hhash->State set back |
| * to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve |
| * the computed digest. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (message buffer). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_MD5_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| hhash->DigestCalculationDisable = RESET; |
| return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5); |
| } |
| |
| |
| /** |
| * @brief SHA1 HMAC step 1 completion and step 2 start in multi-buffer DMA mode. |
| * @note Step 1 consists in writing the inner hash function key in the Peripheral, |
| * step 2 consists in writing the message text. |
| * @note The API carries out the HMAC step 1 then starts step 2 with |
| * the first buffer entered to the Peripheral. DCAL bit is not automatically set after |
| * the message buffer feeding, allowing other messages DMA transfers to occur. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the |
| * HASH digest computation is corrupted. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (message buffer). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA1_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| hhash->DigestCalculationDisable = SET; |
| return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1); |
| } |
| |
| /** |
| * @brief SHA1 HMAC step 2 in multi-buffer DMA mode. |
| * @note Step 2 consists in writing the message text in the Peripheral. |
| * @note The API carries on the HMAC step 2, applied to the buffer entered as input |
| * parameter. DCAL bit is not automatically set after the message buffer feeding, |
| * allowing other messages DMA transfers to occur. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the |
| * HASH digest computation is corrupted. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (message buffer). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA1_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| if (hhash->DigestCalculationDisable != SET) |
| { |
| return HAL_ERROR; |
| } |
| return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1); |
| } |
| |
| /** |
| * @brief SHA1 HMAC step 2 wrap-up and step 3 completion in multi-buffer DMA mode. |
| * @note Step 2 consists in writing the message text in the Peripheral, |
| * step 3 consists in writing the outer hash function key. |
| * @note The API wraps up the HMAC step 2 in processing the buffer entered as input |
| * parameter (the input buffer must be the last one of the multi-buffer thread) |
| * then carries out HMAC step 3. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @note Once the DMA transfers are finished (indicated by hhash->State set back |
| * to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve |
| * the computed digest. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (message buffer). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA1_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| hhash->DigestCalculationDisable = RESET; |
| return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1); |
| } |
| |
| /** |
| * @brief SHA224 HMAC step 1 completion and step 2 start in multi-buffer DMA mode. |
| * @note Step 1 consists in writing the inner hash function key in the Peripheral, |
| * step 2 consists in writing the message text. |
| * @note The API carries out the HMAC step 1 then starts step 2 with |
| * the first buffer entered to the Peripheral. DCAL bit is not automatically set after |
| * the message buffer feeding, allowing other messages DMA transfers to occur. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the |
| * HASH digest computation is corrupted. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (message buffer). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA224_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| hhash->DigestCalculationDisable = SET; |
| return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224); |
| } |
| |
| /** |
| * @brief SHA224 HMAC step 2 in multi-buffer DMA mode. |
| * @note Step 2 consists in writing the message text in the Peripheral. |
| * @note The API carries on the HMAC step 2, applied to the buffer entered as input |
| * parameter. DCAL bit is not automatically set after the message buffer feeding, |
| * allowing other messages DMA transfers to occur. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the |
| * HASH digest computation is corrupted. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (message buffer). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA224_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| if (hhash->DigestCalculationDisable != SET) |
| { |
| return HAL_ERROR; |
| } |
| return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224); |
| } |
| |
| /** |
| * @brief SHA224 HMAC step 2 wrap-up and step 3 completion in multi-buffer DMA mode. |
| * @note Step 2 consists in writing the message text in the Peripheral, |
| * step 3 consists in writing the outer hash function key. |
| * @note The API wraps up the HMAC step 2 in processing the buffer entered as input |
| * parameter (the input buffer must be the last one of the multi-buffer thread) |
| * then carries out HMAC step 3. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @note Once the DMA transfers are finished (indicated by hhash->State set back |
| * to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve |
| * the computed digest. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (message buffer). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA224_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| hhash->DigestCalculationDisable = RESET; |
| return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224); |
| } |
| |
| /** |
| * @brief SHA256 HMAC step 1 completion and step 2 start in multi-buffer DMA mode. |
| * @note Step 1 consists in writing the inner hash function key in the Peripheral, |
| * step 2 consists in writing the message text. |
| * @note The API carries out the HMAC step 1 then starts step 2 with |
| * the first buffer entered to the Peripheral. DCAL bit is not automatically set after |
| * the message buffer feeding, allowing other messages DMA transfers to occur. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the |
| * HASH digest computation is corrupted. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (message buffer). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA256_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| hhash->DigestCalculationDisable = SET; |
| return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256); |
| } |
| |
| /** |
| * @brief SHA256 HMAC step 2 in multi-buffer DMA mode. |
| * @note Step 2 consists in writing the message text in the Peripheral. |
| * @note The API carries on the HMAC step 2, applied to the buffer entered as input |
| * parameter. DCAL bit is not automatically set after the message buffer feeding, |
| * allowing other messages DMA transfers to occur. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the |
| * HASH digest computation is corrupted. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (message buffer). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA256_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| if (hhash->DigestCalculationDisable != SET) |
| { |
| return HAL_ERROR; |
| } |
| return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256); |
| } |
| |
| /** |
| * @brief SHA256 HMAC step 2 wrap-up and step 3 completion in multi-buffer DMA mode. |
| * @note Step 2 consists in writing the message text in the Peripheral, |
| * step 3 consists in writing the outer hash function key. |
| * @note The API wraps up the HMAC step 2 in processing the buffer entered as input |
| * parameter (the input buffer must be the last one of the multi-buffer thread) |
| * then carries out HMAC step 3. |
| * @note Same key is used for the inner and the outer hash functions; pointer to key and |
| * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. |
| * @note Once the DMA transfers are finished (indicated by hhash->State set back |
| * to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve |
| * the computed digest. |
| * @param hhash HASH handle. |
| * @param pInBuffer pointer to the input buffer (message buffer). |
| * @param Size length of the input buffer in bytes. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_HMACEx_SHA256_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) |
| { |
| hhash->DigestCalculationDisable = RESET; |
| return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* MDMA defined*/ |
| /** |
| * @} |
| */ |
| #endif /* HAL_HASH_MODULE_ENABLED */ |
| |
| /** |
| * @} |
| */ |
| #endif /* HASH*/ |
| /** |
| * @} |
| */ |
| |
| |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
