| // Copyright 2011 Google Inc. All Rights Reserved. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "clean.h" |
| #include "build.h" |
| |
| #include "test.h" |
| |
| struct CleanTest : public StateTestWithBuiltinRules { |
| VirtualFileSystem fs_; |
| BuildConfig config_; |
| virtual void SetUp() { |
| config_.verbosity = BuildConfig::QUIET; |
| } |
| }; |
| |
| TEST_F(CleanTest, CleanAll) { |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "build in1: cat src1\n" |
| "build out1: cat in1\n" |
| "build in2: cat src2\n" |
| "build out2: cat in2\n")); |
| fs_.Create("in1", ""); |
| fs_.Create("out1", ""); |
| fs_.Create("in2", ""); |
| fs_.Create("out2", ""); |
| |
| Cleaner cleaner(&state_, config_, &fs_); |
| |
| ASSERT_EQ(0, cleaner.cleaned_files_count()); |
| EXPECT_EQ(0, cleaner.CleanAll()); |
| EXPECT_EQ(4, cleaner.cleaned_files_count()); |
| EXPECT_EQ(4u, fs_.files_removed_.size()); |
| |
| // Check they are removed. |
| string err; |
| EXPECT_EQ(0, fs_.Stat("in1", &err)); |
| EXPECT_EQ(0, fs_.Stat("out1", &err)); |
| EXPECT_EQ(0, fs_.Stat("in2", &err)); |
| EXPECT_EQ(0, fs_.Stat("out2", &err)); |
| fs_.files_removed_.clear(); |
| |
| EXPECT_EQ(0, cleaner.CleanAll()); |
| EXPECT_EQ(0, cleaner.cleaned_files_count()); |
| EXPECT_EQ(0u, fs_.files_removed_.size()); |
| } |
| |
| TEST_F(CleanTest, CleanAllDryRun) { |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "build in1: cat src1\n" |
| "build out1: cat in1\n" |
| "build in2: cat src2\n" |
| "build out2: cat in2\n")); |
| fs_.Create("in1", ""); |
| fs_.Create("out1", ""); |
| fs_.Create("in2", ""); |
| fs_.Create("out2", ""); |
| |
| config_.dry_run = true; |
| Cleaner cleaner(&state_, config_, &fs_); |
| |
| ASSERT_EQ(0, cleaner.cleaned_files_count()); |
| EXPECT_EQ(0, cleaner.CleanAll()); |
| EXPECT_EQ(4, cleaner.cleaned_files_count()); |
| EXPECT_EQ(0u, fs_.files_removed_.size()); |
| |
| // Check they are not removed. |
| string err; |
| EXPECT_LT(0, fs_.Stat("in1", &err)); |
| EXPECT_LT(0, fs_.Stat("out1", &err)); |
| EXPECT_LT(0, fs_.Stat("in2", &err)); |
| EXPECT_LT(0, fs_.Stat("out2", &err)); |
| fs_.files_removed_.clear(); |
| |
| EXPECT_EQ(0, cleaner.CleanAll()); |
| EXPECT_EQ(4, cleaner.cleaned_files_count()); |
| EXPECT_EQ(0u, fs_.files_removed_.size()); |
| } |
| |
| TEST_F(CleanTest, CleanTarget) { |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "build in1: cat src1\n" |
| "build out1: cat in1\n" |
| "build in2: cat src2\n" |
| "build out2: cat in2\n")); |
| fs_.Create("in1", ""); |
| fs_.Create("out1", ""); |
| fs_.Create("in2", ""); |
| fs_.Create("out2", ""); |
| |
| Cleaner cleaner(&state_, config_, &fs_); |
| |
| ASSERT_EQ(0, cleaner.cleaned_files_count()); |
| ASSERT_EQ(0, cleaner.CleanTarget("out1")); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| EXPECT_EQ(2u, fs_.files_removed_.size()); |
| |
| // Check they are removed. |
| string err; |
| EXPECT_EQ(0, fs_.Stat("in1", &err)); |
| EXPECT_EQ(0, fs_.Stat("out1", &err)); |
| EXPECT_LT(0, fs_.Stat("in2", &err)); |
| EXPECT_LT(0, fs_.Stat("out2", &err)); |
| fs_.files_removed_.clear(); |
| |
| ASSERT_EQ(0, cleaner.CleanTarget("out1")); |
| EXPECT_EQ(0, cleaner.cleaned_files_count()); |
| EXPECT_EQ(0u, fs_.files_removed_.size()); |
| } |
| |
| TEST_F(CleanTest, CleanTargetDryRun) { |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "build in1: cat src1\n" |
| "build out1: cat in1\n" |
| "build in2: cat src2\n" |
| "build out2: cat in2\n")); |
| fs_.Create("in1", ""); |
| fs_.Create("out1", ""); |
| fs_.Create("in2", ""); |
| fs_.Create("out2", ""); |
| |
| config_.dry_run = true; |
| Cleaner cleaner(&state_, config_, &fs_); |
| |
| ASSERT_EQ(0, cleaner.cleaned_files_count()); |
| ASSERT_EQ(0, cleaner.CleanTarget("out1")); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| EXPECT_EQ(0u, fs_.files_removed_.size()); |
| |
| // Check they are not removed. |
| string err; |
| EXPECT_LT(0, fs_.Stat("in1", &err)); |
| EXPECT_LT(0, fs_.Stat("out1", &err)); |
| EXPECT_LT(0, fs_.Stat("in2", &err)); |
| EXPECT_LT(0, fs_.Stat("out2", &err)); |
| fs_.files_removed_.clear(); |
| |
| ASSERT_EQ(0, cleaner.CleanTarget("out1")); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| EXPECT_EQ(0u, fs_.files_removed_.size()); |
| } |
| |
| TEST_F(CleanTest, CleanRule) { |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "rule cat_e\n" |
| " command = cat -e $in > $out\n" |
| "build in1: cat_e src1\n" |
| "build out1: cat in1\n" |
| "build in2: cat_e src2\n" |
| "build out2: cat in2\n")); |
| fs_.Create("in1", ""); |
| fs_.Create("out1", ""); |
| fs_.Create("in2", ""); |
| fs_.Create("out2", ""); |
| |
| Cleaner cleaner(&state_, config_, &fs_); |
| |
| ASSERT_EQ(0, cleaner.cleaned_files_count()); |
| ASSERT_EQ(0, cleaner.CleanRule("cat_e")); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| EXPECT_EQ(2u, fs_.files_removed_.size()); |
| |
| // Check they are removed. |
| string err; |
| EXPECT_EQ(0, fs_.Stat("in1", &err)); |
| EXPECT_LT(0, fs_.Stat("out1", &err)); |
| EXPECT_EQ(0, fs_.Stat("in2", &err)); |
| EXPECT_LT(0, fs_.Stat("out2", &err)); |
| fs_.files_removed_.clear(); |
| |
| ASSERT_EQ(0, cleaner.CleanRule("cat_e")); |
| EXPECT_EQ(0, cleaner.cleaned_files_count()); |
| EXPECT_EQ(0u, fs_.files_removed_.size()); |
| } |
| |
| TEST_F(CleanTest, CleanRuleDryRun) { |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "rule cat_e\n" |
| " command = cat -e $in > $out\n" |
| "build in1: cat_e src1\n" |
| "build out1: cat in1\n" |
| "build in2: cat_e src2\n" |
| "build out2: cat in2\n")); |
| fs_.Create("in1", ""); |
| fs_.Create("out1", ""); |
| fs_.Create("in2", ""); |
| fs_.Create("out2", ""); |
| |
| config_.dry_run = true; |
| Cleaner cleaner(&state_, config_, &fs_); |
| |
| ASSERT_EQ(0, cleaner.cleaned_files_count()); |
| ASSERT_EQ(0, cleaner.CleanRule("cat_e")); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| EXPECT_EQ(0u, fs_.files_removed_.size()); |
| |
| // Check they are not removed. |
| string err; |
| EXPECT_LT(0, fs_.Stat("in1", &err)); |
| EXPECT_LT(0, fs_.Stat("out1", &err)); |
| EXPECT_LT(0, fs_.Stat("in2", &err)); |
| EXPECT_LT(0, fs_.Stat("out2", &err)); |
| fs_.files_removed_.clear(); |
| |
| ASSERT_EQ(0, cleaner.CleanRule("cat_e")); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| EXPECT_EQ(0u, fs_.files_removed_.size()); |
| } |
| |
| TEST_F(CleanTest, CleanRuleGenerator) { |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "rule regen\n" |
| " command = cat $in > $out\n" |
| " generator = 1\n" |
| "build out1: cat in1\n" |
| "build out2: regen in2\n")); |
| fs_.Create("out1", ""); |
| fs_.Create("out2", ""); |
| |
| Cleaner cleaner(&state_, config_, &fs_); |
| EXPECT_EQ(0, cleaner.CleanAll()); |
| EXPECT_EQ(1, cleaner.cleaned_files_count()); |
| EXPECT_EQ(1u, fs_.files_removed_.size()); |
| |
| fs_.Create("out1", ""); |
| |
| EXPECT_EQ(0, cleaner.CleanAll(/*generator=*/true)); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| EXPECT_EQ(2u, fs_.files_removed_.size()); |
| } |
| |
| TEST_F(CleanTest, CleanDepFile) { |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "rule cc\n" |
| " command = cc $in > $out\n" |
| " depfile = $out.d\n" |
| "build out1: cc in1\n")); |
| fs_.Create("out1", ""); |
| fs_.Create("out1.d", ""); |
| |
| Cleaner cleaner(&state_, config_, &fs_); |
| EXPECT_EQ(0, cleaner.CleanAll()); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| EXPECT_EQ(2u, fs_.files_removed_.size()); |
| } |
| |
| TEST_F(CleanTest, CleanDepFileOnCleanTarget) { |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "rule cc\n" |
| " command = cc $in > $out\n" |
| " depfile = $out.d\n" |
| "build out1: cc in1\n")); |
| fs_.Create("out1", ""); |
| fs_.Create("out1.d", ""); |
| |
| Cleaner cleaner(&state_, config_, &fs_); |
| EXPECT_EQ(0, cleaner.CleanTarget("out1")); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| EXPECT_EQ(2u, fs_.files_removed_.size()); |
| } |
| |
| TEST_F(CleanTest, CleanDepFileOnCleanRule) { |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "rule cc\n" |
| " command = cc $in > $out\n" |
| " depfile = $out.d\n" |
| "build out1: cc in1\n")); |
| fs_.Create("out1", ""); |
| fs_.Create("out1.d", ""); |
| |
| Cleaner cleaner(&state_, config_, &fs_); |
| EXPECT_EQ(0, cleaner.CleanRule("cc")); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| EXPECT_EQ(2u, fs_.files_removed_.size()); |
| } |
| |
| TEST_F(CleanTest, CleanRspFile) { |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "rule cc\n" |
| " command = cc $in > $out\n" |
| " rspfile = $rspfile\n" |
| " rspfile_content=$in\n" |
| "build out1: cc in1\n" |
| " rspfile = cc1.rsp\n")); |
| fs_.Create("out1", ""); |
| fs_.Create("cc1.rsp", ""); |
| |
| Cleaner cleaner(&state_, config_, &fs_); |
| EXPECT_EQ(0, cleaner.CleanAll()); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| EXPECT_EQ(2u, fs_.files_removed_.size()); |
| } |
| |
| TEST_F(CleanTest, CleanRsp) { |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "rule cat_rsp \n" |
| " command = cat $rspfile > $out\n" |
| " rspfile = $rspfile\n" |
| " rspfile_content = $in\n" |
| "build in1: cat src1\n" |
| "build out1: cat in1\n" |
| "build in2: cat_rsp src2\n" |
| " rspfile=in2.rsp\n" |
| "build out2: cat_rsp in2\n" |
| " rspfile=out2.rsp\n" |
| )); |
| fs_.Create("in1", ""); |
| fs_.Create("out1", ""); |
| fs_.Create("in2.rsp", ""); |
| fs_.Create("out2.rsp", ""); |
| fs_.Create("in2", ""); |
| fs_.Create("out2", ""); |
| |
| Cleaner cleaner(&state_, config_, &fs_); |
| ASSERT_EQ(0, cleaner.cleaned_files_count()); |
| ASSERT_EQ(0, cleaner.CleanTarget("out1")); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| ASSERT_EQ(0, cleaner.CleanTarget("in2")); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| ASSERT_EQ(0, cleaner.CleanRule("cat_rsp")); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| |
| EXPECT_EQ(6u, fs_.files_removed_.size()); |
| |
| // Check they are removed. |
| string err; |
| EXPECT_EQ(0, fs_.Stat("in1", &err)); |
| EXPECT_EQ(0, fs_.Stat("out1", &err)); |
| EXPECT_EQ(0, fs_.Stat("in2", &err)); |
| EXPECT_EQ(0, fs_.Stat("out2", &err)); |
| EXPECT_EQ(0, fs_.Stat("in2.rsp", &err)); |
| EXPECT_EQ(0, fs_.Stat("out2.rsp", &err)); |
| } |
| |
| TEST_F(CleanTest, CleanFailure) { |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "build dir: cat src1\n")); |
| fs_.MakeDir("dir"); |
| Cleaner cleaner(&state_, config_, &fs_); |
| EXPECT_NE(0, cleaner.CleanAll()); |
| } |
| |
| TEST_F(CleanTest, CleanPhony) { |
| string err; |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "build phony: phony t1 t2\n" |
| "build t1: cat\n" |
| "build t2: cat\n")); |
| |
| fs_.Create("phony", ""); |
| fs_.Create("t1", ""); |
| fs_.Create("t2", ""); |
| |
| // Check that CleanAll does not remove "phony". |
| Cleaner cleaner(&state_, config_, &fs_); |
| EXPECT_EQ(0, cleaner.CleanAll()); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| EXPECT_LT(0, fs_.Stat("phony", &err)); |
| |
| fs_.Create("t1", ""); |
| fs_.Create("t2", ""); |
| |
| // Check that CleanTarget does not remove "phony". |
| EXPECT_EQ(0, cleaner.CleanTarget("phony")); |
| EXPECT_EQ(2, cleaner.cleaned_files_count()); |
| EXPECT_LT(0, fs_.Stat("phony", &err)); |
| } |
| |
| TEST_F(CleanTest, CleanDepFileAndRspFileWithSpaces) { |
| ASSERT_NO_FATAL_FAILURE(AssertParse(&state_, |
| "rule cc_dep\n" |
| " command = cc $in > $out\n" |
| " depfile = $out.d\n" |
| "rule cc_rsp\n" |
| " command = cc $in > $out\n" |
| " rspfile = $out.rsp\n" |
| " rspfile_content = $in\n" |
| "build out$ 1: cc_dep in$ 1\n" |
| "build out$ 2: cc_rsp in$ 1\n" |
| )); |
| fs_.Create("out 1", ""); |
| fs_.Create("out 2", ""); |
| fs_.Create("out 1.d", ""); |
| fs_.Create("out 2.rsp", ""); |
| |
| Cleaner cleaner(&state_, config_, &fs_); |
| EXPECT_EQ(0, cleaner.CleanAll()); |
| EXPECT_EQ(4, cleaner.cleaned_files_count()); |
| EXPECT_EQ(4u, fs_.files_removed_.size()); |
| |
| string err; |
| EXPECT_EQ(0, fs_.Stat("out 1", &err)); |
| EXPECT_EQ(0, fs_.Stat("out 2", &err)); |
| EXPECT_EQ(0, fs_.Stat("out 1.d", &err)); |
| EXPECT_EQ(0, fs_.Stat("out 2.rsp", &err)); |
| } |