| .\" ************************************************************************** |
| .\" * _ _ ____ _ |
| .\" * Project ___| | | | _ \| | |
| .\" * / __| | | | |_) | | |
| .\" * | (__| |_| | _ <| |___ |
| .\" * \___|\___/|_| \_\_____| |
| .\" * |
| .\" * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al. |
| .\" * |
| .\" * This software is licensed as described in the file COPYING, which |
| .\" * you should have received as part of this distribution. The terms |
| .\" * are also available at http://curl.haxx.se/docs/copyright.html. |
| .\" * |
| .\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| .\" * copies of the Software, and permit persons to whom the Software is |
| .\" * furnished to do so, under the terms of the COPYING file. |
| .\" * |
| .\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| .\" * KIND, either express or implied. |
| .\" * |
| .\" ************************************************************************** |
| .\" |
| .TH libcurl-errors 3 "1 Jan 2010" "libcurl 7.20.0" "libcurl errors" |
| .SH NAME |
| libcurl-errors \- error codes in libcurl |
| .SH DESCRIPTION |
| This man page includes most, if not all, available error codes in libcurl. |
| Why they occur and possibly what you can do to fix the problem are also included. |
| .SH "CURLcode" |
| Almost all "easy" interface functions return a CURLcode error code. No matter |
| what, using the \fIcurl_easy_setopt(3)\fP option \fICURLOPT_ERRORBUFFER\fP is |
| a good idea as it will give you a human readable error string that may offer |
| more details about the cause of the error than just the error code. |
| \fIcurl_easy_strerror(3)\fP can be called to get an error string from a |
| given CURLcode number. |
| |
| CURLcode is one of the following: |
| .IP "CURLE_OK (0)" |
| All fine. Proceed as usual. |
| .IP "CURLE_UNSUPPORTED_PROTOCOL (1)" |
| The URL you passed to libcurl used a protocol that this libcurl does not |
| support. The support might be a compile-time option that you didn't use, it |
| can be a misspelled protocol string or just a protocol libcurl has no code |
| for. |
| .IP "CURLE_FAILED_INIT (2)" |
| Very early initialization code failed. This is likely to be an internal error |
| or problem, or a resource problem where something fundamental couldn't get |
| done at init time. |
| .IP "CURLE_URL_MALFORMAT (3)" |
| The URL was not properly formatted. |
| .IP "CURLE_NOT_BUILT_IN (4)" |
| A requested feature, protocol or option was not found built-in in this libcurl |
| due to a build-time decision. This means that a feature or option was not |
| enabled or explicitly disabled when libcurl was built and in order to get it |
| to function you have to get a rebuilt libcurl. |
| .IP "CURLE_COULDNT_RESOLVE_PROXY (5)" |
| Couldn't resolve proxy. The given proxy host could not be resolved. |
| .IP "CURLE_COULDNT_RESOLVE_HOST (6)" |
| Couldn't resolve host. The given remote host was not resolved. |
| .IP "CURLE_COULDNT_CONNECT (7)" |
| Failed to connect() to host or proxy. |
| .IP "CURLE_FTP_WEIRD_SERVER_REPLY (8)" |
| After connecting to a FTP server, libcurl expects to get a certain reply |
| back. This error code implies that it got a strange or bad reply. The given |
| remote server is probably not an OK FTP server. |
| .IP "CURLE_REMOTE_ACCESS_DENIED (9)" |
| We were denied access to the resource given in the URL. For FTP, this occurs |
| while trying to change to the remote directory. |
| .IP "CURLE_FTP_ACCEPT_FAILED (10)" |
| While waiting for the server to connect back when an active FTP session is |
| used, an error code was sent over the control connection or similar. |
| .IP "CURLE_FTP_WEIRD_PASS_REPLY (11)" |
| After having sent the FTP password to the server, libcurl expects a proper |
| reply. This error code indicates that an unexpected code was returned. |
| .IP "CURLE_FTP_ACCEPT_TIMEOUT (12)" |
| During an active FTP session while waiting for the server to connect, the |
| \fICURLOPT_ACCEPTTIMOUT_MS\fP (or the internal default) timeout expired. |
| .IP "CURLE_FTP_WEIRD_PASV_REPLY (13)" |
| libcurl failed to get a sensible result back from the server as a response to |
| either a PASV or a EPSV command. The server is flawed. |
| .IP "CURLE_FTP_WEIRD_227_FORMAT (14)" |
| FTP servers return a 227-line as a response to a PASV command. If libcurl |
| fails to parse that line, this return code is passed back. |
| .IP "CURLE_FTP_CANT_GET_HOST (15)" |
| An internal failure to lookup the host used for the new connection. |
| .IP "CURLE_FTP_COULDNT_SET_TYPE (17)" |
| Received an error when trying to set the transfer mode to binary or ASCII. |
| .IP "CURLE_PARTIAL_FILE (18)" |
| A file transfer was shorter or larger than expected. This happens when the |
| server first reports an expected transfer size, and then delivers data that |
| doesn't match the previously given size. |
| .IP "CURLE_FTP_COULDNT_RETR_FILE (19)" |
| This was either a weird reply to a 'RETR' command or a zero byte transfer |
| complete. |
| .IP "CURLE_QUOTE_ERROR (21)" |
| When sending custom "QUOTE" commands to the remote server, one of the commands |
| returned an error code that was 400 or higher (for FTP) or otherwise |
| indicated unsuccessful completion of the command. |
| .IP "CURLE_HTTP_RETURNED_ERROR (22)" |
| This is returned if CURLOPT_FAILONERROR is set TRUE and the HTTP server |
| returns an error code that is >= 400. |
| .IP "CURLE_WRITE_ERROR (23)" |
| An error occurred when writing received data to a local file, or an error was |
| returned to libcurl from a write callback. |
| .IP "CURLE_UPLOAD_FAILED (25)" |
| Failed starting the upload. For FTP, the server typically denied the STOR |
| command. The error buffer usually contains the server's explanation for this. |
| .IP "CURLE_READ_ERROR (26)" |
| There was a problem reading a local file or an error returned by the read |
| callback. |
| .IP "CURLE_OUT_OF_MEMORY (27)" |
| A memory allocation request failed. This is serious badness and |
| things are severely screwed up if this ever occurs. |
| .IP "CURLE_OPERATION_TIMEDOUT (28)" |
| Operation timeout. The specified time-out period was reached according to the |
| conditions. |
| .IP "CURLE_FTP_PORT_FAILED (30)" |
| The FTP PORT command returned error. This mostly happens when you haven't |
| specified a good enough address for libcurl to use. See \fICURLOPT_FTPPORT\fP. |
| .IP "CURLE_FTP_COULDNT_USE_REST (31)" |
| The FTP REST command returned error. This should never happen if the server is |
| sane. |
| .IP "CURLE_RANGE_ERROR (33)" |
| The server does not support or accept range requests. |
| .IP "CURLE_HTTP_POST_ERROR (34)" |
| This is an odd error that mainly occurs due to internal confusion. |
| .IP "CURLE_SSL_CONNECT_ERROR (35)" |
| A problem occurred somewhere in the SSL/TLS handshake. You really want the |
| error buffer and read the message there as it pinpoints the problem slightly |
| more. Could be certificates (file formats, paths, permissions), passwords, and |
| others. |
| .IP "CURLE_BAD_DOWNLOAD_RESUME (36)" |
| The download could not be resumed because the specified offset was out of the |
| file boundary. |
| .IP "CURLE_FILE_COULDNT_READ_FILE (37)" |
| A file given with FILE:// couldn't be opened. Most likely because the file |
| path doesn't identify an existing file. Did you check file permissions? |
| .IP "CURLE_LDAP_CANNOT_BIND (38)" |
| LDAP cannot bind. LDAP bind operation failed. |
| .IP "CURLE_LDAP_SEARCH_FAILED (39)" |
| LDAP search failed. |
| .IP "CURLE_FUNCTION_NOT_FOUND (41)" |
| Function not found. A required zlib function was not found. |
| .IP "CURLE_ABORTED_BY_CALLBACK (42)" |
| Aborted by callback. A callback returned "abort" to libcurl. |
| .IP "CURLE_BAD_FUNCTION_ARGUMENT (43)" |
| Internal error. A function was called with a bad parameter. |
| .IP "CURLE_INTERFACE_FAILED (45)" |
| Interface error. A specified outgoing interface could not be used. Set which |
| interface to use for outgoing connections' source IP address with |
| CURLOPT_INTERFACE. |
| .IP "CURLE_TOO_MANY_REDIRECTS (47)" |
| Too many redirects. When following redirects, libcurl hit the maximum amount. |
| Set your limit with CURLOPT_MAXREDIRS. |
| .IP "CURLE_UNKNOWN_OPTION (48)" |
| An option passed to libcurl is not recognized/known. Refer to the appropriate |
| documentation. This is most likely a problem in the program that uses |
| libcurl. The error buffer might contain more specific information about which |
| exact option it concerns. |
| .IP "CURLE_TELNET_OPTION_SYNTAX (49)" |
| A telnet option string was Illegally formatted. |
| .IP "CURLE_PEER_FAILED_VERIFICATION (51)" |
| The remote server's SSL certificate or SSH md5 fingerprint was deemed not OK. |
| .IP "CURLE_GOT_NOTHING (52)" |
| Nothing was returned from the server, and under the circumstances, getting |
| nothing is considered an error. |
| .IP "CURLE_SSL_ENGINE_NOTFOUND (53)" |
| The specified crypto engine wasn't found. |
| .IP "CURLE_SSL_ENGINE_SETFAILED (54)" |
| Failed setting the selected SSL crypto engine as default! |
| .IP "CURLE_SEND_ERROR (55)" |
| Failed sending network data. |
| .IP "CURLE_RECV_ERROR (56)" |
| Failure with receiving network data. |
| .IP "CURLE_SSL_CERTPROBLEM (58)" |
| problem with the local client certificate. |
| .IP "CURLE_SSL_CIPHER (59)" |
| Couldn't use specified cipher. |
| .IP "CURLE_SSL_CACERT (60)" |
| Peer certificate cannot be authenticated with known CA certificates. |
| .IP "CURLE_BAD_CONTENT_ENCODING (61)" |
| Unrecognized transfer encoding. |
| .IP "CURLE_LDAP_INVALID_URL (62)" |
| Invalid LDAP URL. |
| .IP "CURLE_FILESIZE_EXCEEDED (63)" |
| Maximum file size exceeded. |
| .IP "CURLE_USE_SSL_FAILED (64)" |
| Requested FTP SSL level failed. |
| .IP "CURLE_SEND_FAIL_REWIND (65)" |
| When doing a send operation curl had to rewind the data to retransmit, but the |
| rewinding operation failed. |
| .IP "CURLE_SSL_ENGINE_INITFAILED (66)" |
| Initiating the SSL Engine failed. |
| .IP "CURLE_LOGIN_DENIED (67)" |
| The remote server denied curl to login (Added in 7.13.1) |
| .IP "CURLE_TFTP_NOTFOUND (68)" |
| File not found on TFTP server. |
| .IP "CURLE_TFTP_PERM (69)" |
| Permission problem on TFTP server. |
| .IP "CURLE_REMOTE_DISK_FULL (70)" |
| Out of disk space on the server. |
| .IP "CURLE_TFTP_ILLEGAL (71)" |
| Illegal TFTP operation. |
| .IP "CURLE_TFTP_UNKNOWNID (72)" |
| Unknown TFTP transfer ID. |
| .IP "CURLE_REMOTE_FILE_EXISTS (73)" |
| File already exists and will not be overwritten. |
| .IP "CURLE_TFTP_NOSUCHUSER (74)" |
| This error should never be returned by a properly functioning TFTP server. |
| .IP "CURLE_CONV_FAILED (75)" |
| Character conversion failed. |
| .IP "CURLE_CONV_REQD (76)" |
| Caller must register conversion callbacks. |
| .IP "CURLE_SSL_CACERT_BADFILE (77)" |
| Problem with reading the SSL CA cert (path? access rights?) |
| .IP "CURLE_REMOTE_FILE_NOT_FOUND (78)" |
| The resource referenced in the URL does not exist. |
| .IP "CURLE_SSH (79)" |
| An unspecified error occurred during the SSH session. |
| .IP "CURLE_SSL_SHUTDOWN_FAILED (80)" |
| Failed to shut down the SSL connection. |
| .IP "CURLE_AGAIN (81)" |
| Socket is not ready for send/recv wait till it's ready and try again. This |
| return code is only returned from \fIcurl_easy_recv(3)\fP and |
| \fIcurl_easy_send(3)\fP (Added in 7.18.2) |
| .IP "CURLE_SSL_CRL_BADFILE (82)" |
| Failed to load CRL file (Added in 7.19.0) |
| .IP "CURLE_SSL_ISSUER_ERROR (83)" |
| Issuer check failed (Added in 7.19.0) |
| .IP "CURLE_FTP_PRET_FAILED (84)" |
| The FTP server does not understand the PRET command at all or does not support |
| the given argument. Be careful when using \fICURLOPT_CUSTOMREQUEST\fP, a |
| custom LIST command will be sent with PRET CMD before PASV as well. (Added in |
| 7.20.0) |
| .IP "CURLE_RTSP_CSEQ_ERROR (85)" |
| Mismatch of RTSP CSeq numbers. |
| .IP "CURLE_RTSP_SESSION_ERROR (86)" |
| Mismatch of RTSP Session Identifiers. |
| .IP "CURLE_FTP_BAD_FILE_LIST (87)" |
| Unable to parse FTP file list (during FTP wildcard downloading). |
| .IP "CURLE_CHUNK_FAILED (88)" |
| Chunk callback reported error. |
| .IP "CURLE_OBSOLETE*" |
| These error codes will never be returned. They were used in an old libcurl |
| version and are currently unused. |
| .SH "CURLMcode" |
| This is the generic return code used by functions in the libcurl multi |
| interface. Also consider \fIcurl_multi_strerror(3)\fP. |
| .IP "CURLM_CALL_MULTI_PERFORM (-1)" |
| This is not really an error. It means you should call |
| \fIcurl_multi_perform(3)\fP again without doing select() or similar in between. |
| .IP "CURLM_OK (0)" |
| Things are fine. |
| .IP "CURLM_BAD_HANDLE (1)" |
| The passed-in handle is not a valid CURLM handle. |
| .IP "CURLM_BAD_EASY_HANDLE (2)" |
| An easy handle was not good/valid. It could mean that it isn't an easy handle |
| at all, or possibly that the handle already is in used by this or another |
| multi handle. |
| .IP "CURLM_OUT_OF_MEMORY (3)" |
| You are doomed. |
| .IP "CURLM_INTERNAL_ERROR (4)" |
| This can only be returned if libcurl bugs. Please report it to us! |
| .IP "CURLM_BAD_SOCKET (5)" |
| The passed-in socket is not a valid one that libcurl already knows about. |
| (Added in 7.15.4) |
| .IP "CURLM_UNKNOWN_OPTION (6)" |
| curl_multi_setopt() with unsupported option |
| (Added in 7.15.4) |
| .SH "CURLSHcode" |
| The "share" interface will return a CURLSHcode to indicate when an error has |
| occurred. Also consider \fIcurl_share_strerror(3)\fP. |
| .IP "CURLSHE_OK (0)" |
| All fine. Proceed as usual. |
| .IP "CURLSHE_BAD_OPTION (1)" |
| An invalid option was passed to the function. |
| .IP "CURLSHE_IN_USE (2)" |
| The share object is currently in use. |
| .IP "CURLSHE_INVALID (3)" |
| An invalid share object was passed to the function. |
| .IP "CURLSHE_NOMEM (4)" |
| Not enough memory was available. |
| (Added in 7.12.0) |
| .IP "CURLSHE_NOT_BUILT_IN (5)" |
| The requsted sharing could not be done because the library you use don't have |
| that particular feature enabled. (Added in 7.23.0) |