| This is configure.info, produced by makeinfo version 4.8 from |
| .././etc/configure.texi. |
| |
| INFO-DIR-SECTION GNU admin |
| START-INFO-DIR-ENTRY |
| * configure: (configure). The GNU configure and build system |
| END-INFO-DIR-ENTRY |
| |
| This file documents the GNU configure and build system. |
| |
| Copyright (C) 1998 Cygnus Solutions. |
| |
| Permission is granted to make and distribute verbatim copies of this |
| manual provided the copyright notice and this permission notice are |
| preserved on all copies. |
| |
| Permission is granted to copy and distribute modified versions of |
| this manual under the conditions for verbatim copying, provided that |
| the entire resulting derived work is distributed under the terms of a |
| permission notice identical to this one. |
| |
| Permission is granted to copy and distribute translations of this |
| manual into another language, under the above conditions for modified |
| versions, except that this permission notice may be stated in a |
| translation approved by the Foundation. |
| |
| |
| File: configure.info, Node: Top, Next: Introduction, Up: (dir) |
| |
| GNU configure and build system |
| ****************************** |
| |
| The GNU configure and build system. |
| |
| * Menu: |
| |
| * Introduction:: Introduction. |
| * Getting Started:: Getting Started. |
| * Files:: Files. |
| * Configuration Names:: Configuration Names. |
| * Cross Compilation Tools:: Cross Compilation Tools. |
| * Canadian Cross:: Canadian Cross. |
| * Cygnus Configure:: Cygnus Configure. |
| * Multilibs:: Multilibs. |
| * FAQ:: Frequently Asked Questions. |
| * Index:: Index. |
| |
| |
| File: configure.info, Node: Introduction, Next: Getting Started, Prev: Top, Up: Top |
| |
| 1 Introduction |
| ************** |
| |
| This document describes the GNU configure and build systems. It |
| describes how autoconf, automake, libtool, and make fit together. It |
| also includes a discussion of the older Cygnus configure system. |
| |
| This document does not describe in detail how to use each of the |
| tools; see the respective manuals for that. Instead, it describes |
| which files the developer must write, which files are machine generated |
| and how they are generated, and where certain common problems should be |
| addressed. |
| |
| This document draws on several sources, including the autoconf |
| manual by David MacKenzie (*note autoconf overview: (autoconf)Top.), |
| the automake manual by David MacKenzie and Tom Tromey (*note automake |
| overview: (automake)Top.), the libtool manual by Gordon Matzigkeit |
| (*note libtool overview: (libtool)Top.), and the Cygnus configure |
| manual by K. Richard Pixley. |
| |
| * Menu: |
| |
| * Goals:: Goals. |
| * Tools:: The tools. |
| * History:: History. |
| * Building:: Building. |
| |
| |
| File: configure.info, Node: Goals, Next: Tools, Up: Introduction |
| |
| 1.1 Goals |
| ========= |
| |
| The GNU configure and build system has two main goals. |
| |
| The first is to simplify the development of portable programs. The |
| system permits the developer to concentrate on writing the program, |
| simplifying many details of portability across Unix and even Windows |
| systems, and permitting the developer to describe how to build the |
| program using simple rules rather than complex Makefiles. |
| |
| The second is to simplify the building of programs distributed as |
| source code. All programs are built using a simple, standardized, two |
| step process. The program builder need not install any special tools in |
| order to build the program. |
| |
| |
| File: configure.info, Node: Tools, Next: History, Prev: Goals, Up: Introduction |
| |
| 1.2 Tools |
| ========= |
| |
| The GNU configure and build system is comprised of several different |
| tools. Program developers must build and install all of these tools. |
| |
| People who just want to build programs from distributed sources |
| normally do not need any special tools beyond a Unix shell, a make |
| program, and a C compiler. |
| |
| autoconf |
| provides a general portability framework, based on testing the |
| features of the host system at build time. |
| |
| automake |
| a system for describing how to build a program, permitting the |
| developer to write a simplified `Makefile'. |
| |
| libtool |
| a standardized approach to building shared libraries. |
| |
| gettext |
| provides a framework for translation of text messages into other |
| languages; not really discussed in this document. |
| |
| m4 |
| autoconf requires the GNU version of m4; the standard Unix m4 does |
| not suffice. |
| |
| perl |
| automake requires perl. |
| |
| |
| File: configure.info, Node: History, Next: Building, Prev: Tools, Up: Introduction |
| |
| 1.3 History |
| =========== |
| |
| This is a very brief and probably inaccurate history. |
| |
| As the number of Unix variants increased during the 1980s, it became |
| harder to write programs which could run on all variants. While it was |
| often possible to use `#ifdef' to identify particular systems, |
| developers frequently did not have access to every system, and the |
| characteristics of some systems changed from version to version. |
| |
| By 1992, at least three different approaches had been developed: |
| * The Metaconfig program, by Larry Wall, Harlan Stenn, and Raphael |
| Manfredi. |
| |
| * The Cygnus configure script, by K. Richard Pixley, and the gcc |
| configure script, by Richard Stallman. These use essentially the |
| same approach, and the developers communicated regularly. |
| |
| * The autoconf program, by David MacKenzie. |
| |
| The Metaconfig program is still used for Perl and a few other |
| programs. It is part of the Dist package. I do not know if it is |
| being developed. |
| |
| In 1994, David MacKenzie and others modified autoconf to incorporate |
| all the features of Cygnus configure. Since then, there has been a |
| slow but steady conversion of GNU programs from Cygnus configure to |
| autoconf. gcc has been converted, eliminating the gcc configure script. |
| |
| GNU autoconf was regularly maintained until late 1996. As of this |
| writing in June, 1998, it has no public maintainer. |
| |
| Most programs are built using the make program, which requires the |
| developer to write Makefiles describing how to build the programs. |
| Since most programs are built in pretty much the same way, this led to a |
| lot of duplication. |
| |
| The X Window system is built using the imake tool, which uses a |
| database of rules to eliminate the duplication. However, building a |
| tool which was developed using imake requires that the builder have |
| imake installed, violating one of the goals of the GNU system. |
| |
| The new BSD make provides a standard library of Makefile fragments, |
| which permits developers to write very simple Makefiles. However, this |
| requires that the builder install the new BSD make program. |
| |
| In 1994, David MacKenzie wrote the first version of automake, which |
| permitted writing a simple build description which was converted into a |
| Makefile which could be used by the standard make program. In 1995, Tom |
| Tromey completely rewrote automake in Perl, and he continues to enhance |
| it. |
| |
| Various free packages built libraries, and by around 1995 several |
| included support to build shared libraries on various platforms. |
| However, there was no consistent approach. In early 1996, Gordon |
| Matzigkeit began working on libtool, which provided a standardized |
| approach to building shared libraries. This was integrated into |
| automake from the start. |
| |
| The development of automake and libtool was driven by the GNITS |
| project, a group of GNU maintainers who designed standardized tools to |
| help meet the GNU coding standards. |
| |
| |
| File: configure.info, Node: Building, Prev: History, Up: Introduction |
| |
| 1.4 Building |
| ============ |
| |
| Most readers of this document should already know how to build a tool by |
| running `configure' and `make'. This section may serve as a quick |
| introduction or reminder. |
| |
| Building a tool is normally as simple as running `configure' |
| followed by `make'. You should normally run `configure' from an empty |
| directory, using some path to refer to the `configure' script in the |
| source directory. The directory in which you run `configure' is called |
| the "object directory". |
| |
| In order to use a object directory which is different from the source |
| directory, you must be using the GNU version of `make', which has the |
| required `VPATH' support. Despite this restriction, using a different |
| object directory is highly recommended: |
| * It keeps the files generated during the build from cluttering up |
| your sources. |
| |
| * It permits you to remove the built files by simply removing the |
| entire build directory. |
| |
| * It permits you to build from the same sources with several sets of |
| configure options simultaneously. |
| |
| If you don't have GNU `make', you will have to run `configure' in |
| the source directory. All GNU packages should support this; in |
| particular, GNU packages should not assume the presence of GNU `make'. |
| |
| After running `configure', you can build the tools by running `make'. |
| |
| To install the tools, run `make install'. Installing the tools will |
| copy the programs and any required support files to the "installation |
| directory". The location of the installation directory is controlled |
| by `configure' options, as described below. |
| |
| In the Cygnus tree at present, the info files are built and |
| installed as a separate step. To build them, run `make info'. To |
| install them, run `make install-info'. The equivalent html files are |
| also built and installed in a separate step. To build the html files, |
| run `make html'. To install the html files run `make install-html'. |
| |
| All `configure' scripts support a wide variety of options. The most |
| interesting ones are `--with' and `--enable' options which are |
| generally specific to particular tools. You can usually use the |
| `--help' option to get a list of interesting options for a particular |
| configure script. |
| |
| The only generic options you are likely to use are the `--prefix' |
| and `--exec-prefix' options. These options are used to specify the |
| installation directory. |
| |
| The directory named by the `--prefix' option will hold machine |
| independent files such as info files. |
| |
| The directory named by the `--exec-prefix' option, which is normally |
| a subdirectory of the `--prefix' directory, will hold machine dependent |
| files such as executables. |
| |
| The default for `--prefix' is `/usr/local'. The default for |
| `--exec-prefix' is the value used for `--prefix'. |
| |
| The convention used in Cygnus releases is to use a `--prefix' option |
| of `/usr/cygnus/RELEASE', where RELEASE is the name of the release, and |
| to use a `--exec-prefix' option of `/usr/cygnus/RELEASE/H-HOST', where |
| HOST is the configuration name of the host system (*note Configuration |
| Names::). |
| |
| Do not use either the source or the object directory as the |
| installation directory. That will just lead to confusion. |
| |
| |
| File: configure.info, Node: Getting Started, Next: Files, Prev: Introduction, Up: Top |
| |
| 2 Getting Started |
| ***************** |
| |
| To start using the GNU configure and build system with your software |
| package, you must write three files, and you must run some tools to |
| manually generate additional files. |
| |
| * Menu: |
| |
| * Write configure.in:: Write configure.in. |
| * Write Makefile.am:: Write Makefile.am. |
| * Write acconfig.h:: Write acconfig.h. |
| * Generate files:: Generate files. |
| * Getting Started Example:: Example. |
| |
| |
| File: configure.info, Node: Write configure.in, Next: Write Makefile.am, Up: Getting Started |
| |
| 2.1 Write configure.in |
| ====================== |
| |
| You must first write the file `configure.in'. This is an autoconf |
| input file, and the autoconf manual describes in detail what this file |
| should look like. |
| |
| You will write tests in your `configure.in' file to check for |
| conditions that may change from one system to another, such as the |
| presence of particular header files or functions. |
| |
| For example, not all systems support the `gettimeofday' function. |
| If you want to use the `gettimeofday' function when it is available, |
| and to use some other function when it is not, you would check for this |
| by putting `AC_CHECK_FUNCS(gettimeofday)' in `configure.in'. |
| |
| When the configure script is run at build time, this will arrange to |
| define the preprocessor macro `HAVE_GETTIMEOFDAY' to the value 1 if the |
| `gettimeofday' function is available, and to not define the macro at |
| all if the function is not available. Your code can then use `#ifdef' |
| to test whether it is safe to call `gettimeofday'. |
| |
| If you have an existing body of code, the `autoscan' program may |
| help identify potential portability problems, and hence configure tests |
| that you will want to use. *Note Invoking autoscan: (autoconf)Invoking |
| autoscan. |
| |
| Another handy tool for an existing body of code is `ifnames'. This |
| will show you all the preprocessor conditionals that the code already |
| uses. *Note Invoking ifnames: (autoconf)Invoking ifnames. |
| |
| Besides the portability tests which are specific to your particular |
| package, every `configure.in' file should contain the following macros. |
| |
| `AC_INIT' |
| This macro takes a single argument, which is the name of a file in |
| your package. For example, `AC_INIT(foo.c)'. |
| |
| `AC_PREREQ(VERSION)' |
| This macro is optional. It may be used to indicate the version of |
| `autoconf' that you are using. This will prevent users from |
| running an earlier version of `autoconf' and perhaps getting an |
| invalid `configure' script. For example, `AC_PREREQ(2.12)'. |
| |
| `AM_INIT_AUTOMAKE' |
| This macro takes two arguments: the name of the package, and a |
| version number. For example, `AM_INIT_AUTOMAKE(foo, 1.0)'. (This |
| macro is not needed if you are not using automake). |
| |
| `AM_CONFIG_HEADER' |
| This macro names the header file which will hold the preprocessor |
| macro definitions at run time. Normally this should be |
| `config.h'. Your sources would then use `#include "config.h"' to |
| include it. |
| |
| This macro may optionally name the input file for that header |
| file; by default, this is `config.h.in', but that file name works |
| poorly on DOS filesystems. Therefore, it is often better to name |
| it explicitly as `config.in'. |
| |
| This is what you should normally put in `configure.in': |
| AM_CONFIG_HEADER(config.h:config.in) |
| |
| (If you are not using automake, use `AC_CONFIG_HEADER' rather than |
| `AM_CONFIG_HEADER'). |
| |
| `AM_MAINTAINER_MODE' |
| This macro always appears in Cygnus configure scripts. Other |
| programs may or may not use it. |
| |
| If this macro is used, the `--enable-maintainer-mode' option is |
| required to enable automatic rebuilding of generated files used by |
| the configure system. This of course requires that developers be |
| aware of, and use, that option. |
| |
| If this macro is not used, then the generated files will always be |
| rebuilt automatically. This will cause problems if the wrong |
| versions of autoconf, automake, or others are in the builder's |
| `PATH'. |
| |
| (If you are not using automake, you do not need to use this macro). |
| |
| `AC_EXEEXT' |
| Either this macro or `AM_EXEEXT' always appears in Cygnus configure |
| files. Other programs may or may not use one of them. |
| |
| This macro looks for the executable suffix used on the host |
| system. On Unix systems, this is the empty string. On Windows |
| systems, this is `.exe'. This macro directs automake to use the |
| executable suffix as appropriate when creating programs. This |
| macro does not take any arguments. |
| |
| The `AC_EXEEXT' form is new, and is part of a Cygnus patch to |
| autoconf to support compiling with Visual C++. Older programs use |
| `AM_EXEEXT' instead. |
| |
| (Programs which do not use automake use neither `AC_EXEEXT' nor |
| `AM_EXEEXT'). |
| |
| `AC_PROG_CC' |
| If you are writing C code, you will normally want to use this |
| macro. It locates the C compiler to use. It does not take any |
| arguments. |
| |
| However, if this `configure.in' file is for a library which is to |
| be compiled by a cross compiler which may not fully work, then you |
| will not want to use `AC_PROG_CC'. Instead, you will want to use a |
| variant which does not call the macro `AC_PROG_CC_WORKS'. Examples |
| can be found in various `configure.in' files for libraries that are |
| compiled with cross compilers, such as libiberty or libgloss. |
| This is essentially a bug in autoconf, and there will probably be |
| a better workaround at some point. |
| |
| `AC_PROG_CXX' |
| If you are writing C++ code, you will want to use this macro. It |
| locates the C++ compiler to use. It does not take any arguments. |
| The same cross compiler comments apply as for `AC_PROG_CC'. |
| |
| `AM_PROG_LIBTOOL' |
| If you want to build libraries, and you want to permit them to be |
| shared, or you want to link against libraries which were built |
| using libtool, then you will need this macro. This macro is |
| required in order to use libtool. |
| |
| By default, this will cause all libraries to be built as shared |
| libraries. To prevent this-to change the default-use |
| `AM_DISABLE_SHARED' before `AM_PROG_LIBTOOL'. The configure |
| options `--enable-shared' and `--disable-shared' may be used to |
| override the default at build time. |
| |
| `AC_DEFINE(_GNU_SOURCE)' |
| GNU packages should normally include this line before any other |
| feature tests. This defines the macro `_GNU_SOURCE' when |
| compiling, which directs the libc header files to provide the |
| standard GNU system interfaces including all GNU extensions. If |
| this macro is not defined, certain GNU extensions may not be |
| available. |
| |
| `AC_OUTPUT' |
| This macro takes a list of file names which the configure process |
| should produce. This is normally a list of one or more `Makefile' |
| files in different directories. If your package lives entirely in |
| a single directory, you would use simply `AC_OUTPUT(Makefile)'. |
| If you also have, for example, a `lib' subdirectory, you would use |
| `AC_OUTPUT(Makefile lib/Makefile)'. |
| |
| If you want to use locally defined macros in your `configure.in' |
| file, then you will need to write a `acinclude.m4' file which defines |
| them (if not using automake, this file is called `aclocal.m4'). |
| Alternatively, you can put separate macros in an `m4' subdirectory, and |
| put `ACLOCAL_AMFLAGS = -I m4' in your `Makefile.am' file so that the |
| `aclocal' program will be able to find them. |
| |
| The different macro prefixes indicate which tool defines the macro. |
| Macros which start with `AC_' are part of autoconf. Macros which start |
| with `AM_' are provided by automake or libtool. |
| |
| |
| File: configure.info, Node: Write Makefile.am, Next: Write acconfig.h, Prev: Write configure.in, Up: Getting Started |
| |
| 2.2 Write Makefile.am |
| ===================== |
| |
| You must write the file `Makefile.am'. This is an automake input file, |
| and the automake manual describes in detail what this file should look |
| like. |
| |
| The automake commands in `Makefile.am' mostly look like variable |
| assignments in a `Makefile'. automake recognizes special variable |
| names, and automatically add make rules to the output as needed. |
| |
| There will be one `Makefile.am' file for each directory in your |
| package. For each directory with subdirectories, the `Makefile.am' |
| file should contain the line |
| SUBDIRS = DIR DIR ... |
| where each DIR is the name of a subdirectory. |
| |
| For each `Makefile.am', there should be a corresponding `Makefile' |
| in the `AC_OUTPUT' macro in `configure.in'. |
| |
| Every `Makefile.am' written at Cygnus should contain the line |
| AUTOMAKE_OPTIONS = cygnus |
| This puts automake into Cygnus mode. See the automake manual for |
| details. |
| |
| You may to include the version number of `automake' that you are |
| using on the `AUTOMAKE_OPTIONS' line. For example, |
| AUTOMAKE_OPTIONS = cygnus 1.3 |
| This will prevent users from running an earlier version of |
| `automake' and perhaps getting an invalid `Makefile.in'. |
| |
| If your package builds a program, then in the directory where that |
| program is built you will normally want a line like |
| bin_PROGRAMS = PROGRAM |
| where PROGRAM is the name of the program. You will then want a line |
| like |
| PROGRAM_SOURCES = FILE FILE ... |
| where each FILE is the name of a source file to link into the |
| program (e.g., `foo.c'). |
| |
| If your package builds a library, and you do not want the library to |
| ever be built as a shared library, then in the directory where that |
| library is built you will normally want a line like |
| lib_LIBRARIES = libNAME.a |
| where `libNAME.a' is the name of the library. You will then want a |
| line like |
| libNAME_a_SOURCES = FILE FILE ... |
| where each FILE is the name of a source file to add to the library. |
| |
| If your package builds a library, and you want to permit building the |
| library as a shared library, then in the directory where that library is |
| built you will normally want a line like |
| lib_LTLIBRARIES = libNAME.la |
| The use of `LTLIBRARIES', and the `.la' extension, indicate a |
| library to be built using libtool. As usual, you will then want a line |
| like |
| libNAME_la_SOURCES = FILE FILE ... |
| |
| The strings `bin' and `lib' that appear above in `bin_PROGRAMS' and |
| `lib_LIBRARIES' are not arbitrary. They refer to particular |
| directories, which may be set by the `--bindir' and `--libdir' options |
| to `configure'. If those options are not used, the default values are |
| based on the `--prefix' or `--exec-prefix' options to `configure'. It |
| is possible to use other names if the program or library should be |
| installed in some other directory. |
| |
| The `Makefile.am' file may also contain almost anything that may |
| appear in a normal `Makefile'. automake also supports many other |
| special variables, as well as conditionals. |
| |
| See the automake manual for more information. |
| |
| |
| File: configure.info, Node: Write acconfig.h, Next: Generate files, Prev: Write Makefile.am, Up: Getting Started |
| |
| 2.3 Write acconfig.h |
| ==================== |
| |
| If you are generating a portability header file, (i.e., you are using |
| `AM_CONFIG_HEADER' in `configure.in'), then you will have to write a |
| `acconfig.h' file. It will have to contain the following lines. |
| |
| /* Name of package. */ |
| #undef PACKAGE |
| |
| /* Version of package. */ |
| #undef VERSION |
| |
| This requirement is really a bug in the system, and the requirement |
| may be eliminated at some later date. |
| |
| The `acconfig.h' file will also similar comment and `#undef' lines |
| for any unusual macros in the `configure.in' file, including any macro |
| which appears in a `AC_DEFINE' macro. |
| |
| In particular, if you are writing a GNU package and therefore include |
| `AC_DEFINE(_GNU_SOURCE)' in `configure.in' as suggested above, you will |
| need lines like this in `acconfig.h': |
| /* Enable GNU extensions. */ |
| #undef _GNU_SOURCE |
| |
| Normally the `autoheader' program will inform you of any such |
| requirements by printing an error message when it is run. However, if |
| you do anything particular odd in your `configure.in' file, you will |
| have to make sure that the right entries appear in `acconfig.h', since |
| otherwise the results of the tests may not be available in the |
| `config.h' file which your code will use. |
| |
| (Thee `PACKAGE' and `VERSION' lines are not required if you are not |
| using automake, and in that case you may not need a `acconfig.h' file |
| at all). |
| |
| |
| File: configure.info, Node: Generate files, Next: Getting Started Example, Prev: Write acconfig.h, Up: Getting Started |
| |
| 2.4 Generate files |
| ================== |
| |
| Once you have written `configure.in', `Makefile.am', `acconfig.h', and |
| possibly `acinclude.m4', you must use autoconf and automake programs to |
| produce the first versions of the generated files. This is done by |
| executing the following sequence of commands. |
| |
| aclocal |
| autoconf |
| autoheader |
| automake |
| |
| The `aclocal' and `automake' commands are part of the automake |
| package, and the `autoconf' and `autoheader' commands are part of the |
| autoconf package. |
| |
| If you are using a `m4' subdirectory for your macros, you will need |
| to use the `-I m4' option when you run `aclocal'. |
| |
| If you are not using the Cygnus tree, use the `-a' option when |
| running `automake' command in order to copy the required support files |
| into your source directory. |
| |
| If you are using libtool, you must build and install the libtool |
| package with the same `--prefix' and `--exec-prefix' options as you |
| used with the autoconf and automake packages. You must do this before |
| running any of the above commands. If you are not using the Cygnus |
| tree, you will need to run the `libtoolize' program to copy the libtool |
| support files into your directory. |
| |
| Once you have managed to run these commands without getting any |
| errors, you should create a new empty directory, and run the `configure' |
| script which will have been created by `autoconf' with the |
| `--enable-maintainer-mode' option. This will give you a set of |
| Makefiles which will include rules to automatically rebuild all the |
| generated files. |
| |
| After doing that, whenever you have changed some of the input files |
| and want to regenerated the other files, go to your object directory |
| and run `make'. Doing this is more reliable than trying to rebuild the |
| files manually, because there are complex order dependencies and it is |
| easy to forget something. |
| |
| |
| File: configure.info, Node: Getting Started Example, Prev: Generate files, Up: Getting Started |
| |
| 2.5 Example |
| =========== |
| |
| Let's consider a trivial example. |
| |
| Suppose we want to write a simple version of `touch'. Our program, |
| which we will call `poke', will take a single file name argument, and |
| use the `utime' system call to set the modification and access times of |
| the file to the current time. We want this program to be highly |
| portable. |
| |
| We'll first see what this looks like without using autoconf and |
| automake, and then see what it looks like with them. |
| |
| * Menu: |
| |
| * Getting Started Example 1:: First Try. |
| * Getting Started Example 2:: Second Try. |
| * Getting Started Example 3:: Third Try. |
| * Generate Files in Example:: Generate Files. |
| |
| |
| File: configure.info, Node: Getting Started Example 1, Next: Getting Started Example 2, Up: Getting Started Example |
| |
| 2.5.1 First Try |
| --------------- |
| |
| Here is our first try at `poke.c'. Note that we've written it without |
| ANSI/ISO C prototypes, since we want it to be highly portable. |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <sys/types.h> |
| #include <utime.h> |
| |
| int |
| main (argc, argv) |
| int argc; |
| char **argv; |
| { |
| if (argc != 2) |
| { |
| fprintf (stderr, "Usage: poke file\n"); |
| exit (1); |
| } |
| |
| if (utime (argv[1], NULL) < 0) |
| { |
| perror ("utime"); |
| exit (1); |
| } |
| |
| exit (0); |
| } |
| |
| We also write a simple `Makefile'. |
| |
| CC = gcc |
| CFLAGS = -g -O2 |
| |
| all: poke |
| |
| poke: poke.o |
| $(CC) -o poke $(CFLAGS) $(LDFLAGS) poke.o |
| |
| So far, so good. |
| |
| Unfortunately, there are a few problems. |
| |
| On older Unix systems derived from BSD 4.3, the `utime' system call |
| does not accept a second argument of `NULL'. On those systems, we need |
| to pass a pointer to `struct utimbuf' structure. Unfortunately, even |
| older systems don't define that structure; on those systems, we need to |
| pass an array of two `long' values. |
| |
| The header file `stdlib.h' was invented by ANSI C, and older systems |
| don't have a copy. We included it above to get a declaration of `exit'. |
| |
| We can find some of these portability problems by running |
| `autoscan', which will create a `configure.scan' file which we can use |
| as a prototype for our `configure.in' file. I won't show the output, |
| but it will notice the potential problems with `utime' and `stdlib.h'. |
| |
| In our `Makefile', we don't provide any way to install the program. |
| This doesn't matter much for such a simple example, but a real program |
| will need an `install' target. For that matter, we will also want a |
| `clean' target. |
| |
| |
| File: configure.info, Node: Getting Started Example 2, Next: Getting Started Example 3, Prev: Getting Started Example 1, Up: Getting Started Example |
| |
| 2.5.2 Second Try |
| ---------------- |
| |
| Here is our second try at this program. |
| |
| We modify `poke.c' to use preprocessor macros to control what |
| features are available. (I've cheated a bit by using the same macro |
| names which autoconf will use). |
| |
| #include <stdio.h> |
| |
| #ifdef STDC_HEADERS |
| #include <stdlib.h> |
| #endif |
| |
| #include <sys/types.h> |
| |
| #ifdef HAVE_UTIME_H |
| #include <utime.h> |
| #endif |
| |
| #ifndef HAVE_UTIME_NULL |
| |
| #include <time.h> |
| |
| #ifndef HAVE_STRUCT_UTIMBUF |
| |
| struct utimbuf |
| { |
| long actime; |
| long modtime; |
| }; |
| |
| #endif |
| |
| static int |
| utime_now (file) |
| char *file; |
| { |
| struct utimbuf now; |
| |
| now.actime = now.modtime = time (NULL); |
| return utime (file, &now); |
| } |
| |
| #define utime(f, p) utime_now (f) |
| |
| #endif /* HAVE_UTIME_NULL */ |
| |
| int |
| main (argc, argv) |
| int argc; |
| char **argv; |
| { |
| if (argc != 2) |
| { |
| fprintf (stderr, "Usage: poke file\n"); |
| exit (1); |
| } |
| |
| if (utime (argv[1], NULL) < 0) |
| { |
| perror ("utime"); |
| exit (1); |
| } |
| |
| exit (0); |
| } |
| |
| Here is the associated `Makefile'. We've added support for the |
| preprocessor flags we use. We've also added `install' and `clean' |
| targets. |
| |
| # Set this to your installation directory. |
| bindir = /usr/local/bin |
| |
| # Uncomment this if you have the standard ANSI/ISO C header files. |
| # STDC_HDRS = -DSTDC_HEADERS |
| |
| # Uncomment this if you have utime.h. |
| # UTIME_H = -DHAVE_UTIME_H |
| |
| # Uncomment this if utime (FILE, NULL) works on your system. |
| # UTIME_NULL = -DHAVE_UTIME_NULL |
| |
| # Uncomment this if struct utimbuf is defined in utime.h. |
| # UTIMBUF = -DHAVE_STRUCT_UTIMBUF |
| |
| CC = gcc |
| CFLAGS = -g -O2 |
| |
| ALL_CFLAGS = $(STDC_HDRS) $(UTIME_H) $(UTIME_NULL) $(UTIMBUF) $(CFLAGS) |
| |
| all: poke |
| |
| poke: poke.o |
| $(CC) -o poke $(ALL_CFLAGS) $(LDFLAGS) poke.o |
| |
| .c.o: |
| $(CC) -c $(ALL_CFLAGS) poke.c |
| |
| install: poke |
| cp poke $(bindir)/poke |
| |
| clean: |
| rm poke poke.o |
| |
| Some problems with this approach should be clear. |
| |
| Users who want to compile poke will have to know how `utime' works |
| on their systems, so that they can uncomment the `Makefile' correctly. |
| |
| The installation is done using `cp', but many systems have an |
| `install' program which may be used, and which supports optional |
| features such as stripping debugging information out of the installed |
| binary. |
| |
| The use of `Makefile' variables like `CC', `CFLAGS' and `LDFLAGS' |
| follows the requirements of the GNU standards. This is convenient for |
| all packages, since it reduces surprises for users. However, it is |
| easy to get the details wrong, and wind up with a slightly nonstandard |
| distribution. |
| |
| |
| File: configure.info, Node: Getting Started Example 3, Next: Generate Files in Example, Prev: Getting Started Example 2, Up: Getting Started Example |
| |
| 2.5.3 Third Try |
| --------------- |
| |
| For our third try at this program, we will write a `configure.in' |
| script to discover the configuration features on the host system, rather |
| than requiring the user to edit the `Makefile'. We will also write a |
| `Makefile.am' rather than a `Makefile'. |
| |
| The only change to `poke.c' is to add a line at the start of the |
| file: |
| #include "config.h" |
| |
| The new `configure.in' file is as follows. |
| |
| AC_INIT(poke.c) |
| AM_INIT_AUTOMAKE(poke, 1.0) |
| AM_CONFIG_HEADER(config.h:config.in) |
| AC_PROG_CC |
| AC_HEADER_STDC |
| AC_CHECK_HEADERS(utime.h) |
| AC_EGREP_HEADER(utimbuf, utime.h, AC_DEFINE(HAVE_STRUCT_UTIMBUF)) |
| AC_FUNC_UTIME_NULL |
| AC_OUTPUT(Makefile) |
| |
| The first four macros in this file, and the last one, were described |
| above; see *Note Write configure.in::. If we omit these macros, then |
| when we run `automake' we will get a reminder that we need them. |
| |
| The other macros are standard autoconf macros. |
| |
| `AC_HEADER_STDC' |
| Check for standard C headers. |
| |
| `AC_CHECK_HEADERS' |
| Check whether a particular header file exists. |
| |
| `AC_EGREP_HEADER' |
| Check for a particular string in a particular header file, in this |
| case checking for `utimbuf' in `utime.h'. |
| |
| `AC_FUNC_UTIME_NULL' |
| Check whether `utime' accepts a NULL second argument to set the |
| file change time to the current time. |
| |
| See the autoconf manual for a more complete description. |
| |
| The new `Makefile.am' file is as follows. Note how simple this is |
| compared to our earlier `Makefile'. |
| |
| bin_PROGRAMS = poke |
| |
| poke_SOURCES = poke.c |
| |
| This means that we should build a single program name `poke'. It |
| should be installed in the binary directory, which we called `bindir' |
| earlier. The program `poke' is built from the source file `poke.c'. |
| |
| We must also write a `acconfig.h' file. Besides `PACKAGE' and |
| `VERSION', which must be mentioned for all packages which use automake, |
| we must include `HAVE_STRUCT_UTIMBUF', since we mentioned it in an |
| `AC_DEFINE'. |
| |
| /* Name of package. */ |
| #undef PACKAGE |
| |
| /* Version of package. */ |
| #undef VERSION |
| |
| /* Whether utime.h defines struct utimbuf. */ |
| #undef HAVE_STRUCT_UTIMBUF |
| |
| |
| File: configure.info, Node: Generate Files in Example, Prev: Getting Started Example 3, Up: Getting Started Example |
| |
| 2.5.4 Generate Files |
| -------------------- |
| |
| We must now generate the other files, using the following commands. |
| |
| aclocal |
| autoconf |
| autoheader |
| automake |
| |
| When we run `autoheader', it will remind us of any macros we forgot |
| to add to `acconfig.h'. |
| |
| When we run `automake', it will want to add some files to our |
| distribution. It will add them automatically if we use the |
| `--add-missing' option. |
| |
| By default, `automake' will run in GNU mode, which means that it |
| will want us to create certain additional files; as of this writing, it |
| will want `NEWS', `README', `AUTHORS', and `ChangeLog', all of which |
| are files which should appear in a standard GNU distribution. We can |
| either add those files, or run `automake' with the `--foreign' option. |
| |
| Running these tools will generate the following files, all of which |
| are described in the next chapter. |
| |
| * `aclocal.m4' |
| |
| * `configure' |
| |
| * `config.in' |
| |
| * `Makefile.in' |
| |
| * `stamp-h.in' |
| |
| |
| File: configure.info, Node: Files, Next: Configuration Names, Prev: Getting Started, Up: Top |
| |
| 3 Files |
| ******* |
| |
| As was seen in the previous chapter, the GNU configure and build system |
| uses a number of different files. The developer must write a few files. |
| The others are generated by various tools. |
| |
| The system is rather flexible, and can be used in many different |
| ways. In describing the files that it uses, I will describe the common |
| case, and mention some other cases that may arise. |
| |
| * Menu: |
| |
| * Developer Files:: Developer Files. |
| * Build Files:: Build Files. |
| * Support Files:: Support Files. |
| |
| |
| File: configure.info, Node: Developer Files, Next: Build Files, Up: Files |
| |
| 3.1 Developer Files |
| =================== |
| |
| This section describes the files written or generated by the developer |
| of a package. |
| |
| * Menu: |
| |
| * Developer Files Picture:: Developer Files Picture. |
| * Written Developer Files:: Written Developer Files. |
| * Generated Developer Files:: Generated Developer Files. |
| |
| |
| File: configure.info, Node: Developer Files Picture, Next: Written Developer Files, Up: Developer Files |
| |
| 3.1.1 Developer Files Picture |
| ----------------------------- |
| |
| Here is a picture of the files which are written by the developer, the |
| generated files which would be included with a complete source |
| distribution, and the tools which create those files. The file names |
| are plain text and the tool names are enclosed by `*' characters (e.g., |
| `autoheader' is the name of a tool, not the name of a file). |
| |
| acconfig.h configure.in Makefile.am |
| | | | |
| | --------------+---------------------- | |
| | | | | | |
| v v | acinclude.m4 | | |
| *autoheader* | | v v |
| | | v --->*automake* |
| v |--->*aclocal* | | |
| config.in | | | v |
| | v | Makefile.in |
| | aclocal.m4--- |
| | | |
| v v |
| *autoconf* |
| | |
| v |
| configure |
| |
| |
| File: configure.info, Node: Written Developer Files, Next: Generated Developer Files, Prev: Developer Files Picture, Up: Developer Files |
| |
| 3.1.2 Written Developer Files |
| ----------------------------- |
| |
| The following files would be written by the developer. |
| |
| `configure.in' |
| This is the configuration script. This script contains |
| invocations of autoconf macros. It may also contain ordinary |
| shell script code. This file will contain feature tests for |
| portability issues. The last thing in the file will normally be |
| an `AC_OUTPUT' macro listing which files to create when the |
| builder runs the configure script. This file is always required |
| when using the GNU configure system. *Note Write configure.in::. |
| |
| `Makefile.am' |
| This is the automake input file. It describes how the code should |
| be built. It consists of definitions of automake variables. It |
| may also contain ordinary Makefile targets. This file is only |
| needed when using automake (newer tools normally use automake, but |
| there are still older tools which have not been converted, in |
| which the developer writes `Makefile.in' directly). *Note Write |
| Makefile.am::. |
| |
| `acconfig.h' |
| When the configure script creates a portability header file, by |
| using `AM_CONFIG_HEADER' (or, if not using automake, |
| `AC_CONFIG_HEADER'), this file is used to describe macros which are |
| not recognized by the `autoheader' command. This is normally a |
| fairly uninteresting file, consisting of a collection of `#undef' |
| lines with comments. Normally any call to `AC_DEFINE' in |
| `configure.in' will require a line in this file. *Note Write |
| acconfig.h::. |
| |
| `acinclude.m4' |
| This file is not always required. It defines local autoconf |
| macros. These macros may then be used in `configure.in'. If you |
| don't need any local autoconf macros, then you don't need this |
| file at all. In fact, in general, you never need local autoconf |
| macros, since you can put everything in `configure.in', but |
| sometimes a local macro is convenient. |
| |
| Newer tools may omit `acinclude.m4', and instead use a |
| subdirectory, typically named `m4', and define `ACLOCAL_AMFLAGS = |
| -I m4' in `Makefile.am' to force `aclocal' to look there for macro |
| definitions. The macro definitions are then placed in separate |
| files in that directory. |
| |
| The `acinclude.m4' file is only used when using automake; in older |
| tools, the developer writes `aclocal.m4' directly, if it is needed. |
| |
| |
| File: configure.info, Node: Generated Developer Files, Prev: Written Developer Files, Up: Developer Files |
| |
| 3.1.3 Generated Developer Files |
| ------------------------------- |
| |
| The following files would be generated by the developer. |
| |
| When using automake, these files are normally not generated manually |
| after the first time. Instead, the generated `Makefile' contains rules |
| to automatically rebuild the files as required. When |
| `AM_MAINTAINER_MODE' is used in `configure.in' (the normal case in |
| Cygnus code), the automatic rebuilding rules will only be defined if |
| you configure using the `--enable-maintainer-mode' option. |
| |
| When using automatic rebuilding, it is important to ensure that all |
| the various tools have been built and installed on your `PATH'. Using |
| automatic rebuilding is highly recommended, so much so that I'm not |
| going to explain what you have to do if you don't use it. |
| |
| `configure' |
| This is the configure script which will be run when building the |
| package. This is generated by `autoconf' from `configure.in' and |
| `aclocal.m4'. This is a shell script. |
| |
| `Makefile.in' |
| This is the file which the configure script will turn into the |
| `Makefile' at build time. This file is generated by `automake' |
| from `Makefile.am'. If you aren't using automake, you must write |
| this file yourself. This file is pretty much a normal `Makefile', |
| with some configure substitutions for certain variables. |
| |
| `aclocal.m4' |
| This file is created by the `aclocal' program, based on the |
| contents of `configure.in' and `acinclude.m4' (or, as noted in the |
| description of `acinclude.m4' above, on the contents of an `m4' |
| subdirectory). This file contains definitions of autoconf macros |
| which `autoconf' will use when generating the file `configure'. |
| These autoconf macros may be defined by you in `acinclude.m4' or |
| they may be defined by other packages such as automake, libtool or |
| gettext. If you aren't using automake, you will normally write |
| this file yourself; in that case, if `configure.in' uses only |
| standard autoconf macros, this file will not be needed at all. |
| |
| `config.in' |
| This file is created by `autoheader' based on `acconfig.h' and |
| `configure.in'. At build time, the configure script will define |
| some of the macros in it to create `config.h', which may then be |
| included by your program. This permits your C code to use |
| preprocessor conditionals to change its behaviour based on the |
| characteristics of the host system. This file may also be called |
| `config.h.in'. |
| |
| `stamp.h-in' |
| This rather uninteresting file, which I omitted from the picture, |
| is generated by `automake'. It always contains the string |
| `timestamp'. It is used as a timestamp file indicating whether |
| `config.in' is up to date. Using a timestamp file means that |
| `config.in' can be marked as up to date without actually changing |
| its modification time. This is useful since `config.in' depends |
| upon `configure.in', but it is easy to change `configure.in' in a |
| way which does not affect `config.in'. |
| |
| |
| File: configure.info, Node: Build Files, Next: Support Files, Prev: Developer Files, Up: Files |
| |
| 3.2 Build Files |
| =============== |
| |
| This section describes the files which are created at configure and |
| build time. These are the files which somebody who builds the package |
| will see. |
| |
| Of course, the developer will also build the package. The |
| distinction between developer files and build files is not that the |
| developer does not see the build files, but that somebody who only |
| builds the package does not have to worry about the developer files. |
| |
| * Menu: |
| |
| * Build Files Picture:: Build Files Picture. |
| * Build Files Description:: Build Files Description. |
| |
| |
| File: configure.info, Node: Build Files Picture, Next: Build Files Description, Up: Build Files |
| |
| 3.2.1 Build Files Picture |
| ------------------------- |
| |
| Here is a picture of the files which will be created at build time. |
| `config.status' is both a created file and a shell script which is run |
| to create other files, and the picture attempts to show that. |
| |
| config.in *configure* Makefile.in |
| | | | |
| | v | |
| | config.status | |
| | | | |
| *config.status*<======+==========>*config.status* |
| | | |
| v v |
| config.h Makefile |
| |
| |
| File: configure.info, Node: Build Files Description, Prev: Build Files Picture, Up: Build Files |
| |
| 3.2.2 Build Files Description |
| ----------------------------- |
| |
| This is a description of the files which are created at build time. |
| |
| `config.status' |
| The first step in building a package is to run the `configure' |
| script. The `configure' script will create the file |
| `config.status', which is itself a shell script. When you first |
| run `configure', it will automatically run `config.status'. An |
| `Makefile' derived from an automake generated `Makefile.in' will |
| contain rules to automatically run `config.status' again when |
| necessary to recreate certain files if their inputs change. |
| |
| `Makefile' |
| This is the file which make will read to build the program. The |
| `config.status' script will transform `Makefile.in' into |
| `Makefile'. |
| |
| `config.h' |
| This file defines C preprocessor macros which C code can use to |
| adjust its behaviour on different systems. The `config.status' |
| script will transform `config.in' into `config.h'. |
| |
| `config.cache' |
| This file did not fit neatly into the picture, and I omitted it. |
| It is used by the `configure' script to cache results between |
| runs. This can be an important speedup. If you modify |
| `configure.in' in such a way that the results of old tests should |
| change (perhaps you have added a new library to `LDFLAGS'), then |
| you will have to remove `config.cache' to force the tests to be |
| rerun. |
| |
| The autoconf manual explains how to set up a site specific cache |
| file. This can speed up running `configure' scripts on your |
| system. |
| |
| `stamp.h' |
| This file, which I omitted from the picture, is similar to |
| `stamp-h.in'. It is used as a timestamp file indicating whether |
| `config.h' is up to date. This is useful since `config.h' depends |
| upon `config.status', but it is easy for `config.status' to change |
| in a way which does not affect `config.h'. |
| |
| |
| File: configure.info, Node: Support Files, Prev: Build Files, Up: Files |
| |
| 3.3 Support Files |
| ================= |
| |
| The GNU configure and build system requires several support files to be |
| included with your distribution. You do not normally need to concern |
| yourself with these. If you are using the Cygnus tree, most are already |
| present. Otherwise, they will be installed with your source by |
| `automake' (with the `--add-missing' option) and `libtoolize'. |
| |
| You don't have to put the support files in the top level directory. |
| You can put them in a subdirectory, and use the `AC_CONFIG_AUX_DIR' |
| macro in `configure.in' to tell `automake' and the `configure' script |
| where they are. |
| |
| In this section, I describe the support files, so that you can know |
| what they are and why they are there. |
| |
| `ABOUT-NLS' |
| Added by automake if you are using gettext. This is a |
| documentation file about the gettext project. |
| |
| `ansi2knr.c' |
| Used by an automake generated `Makefile' if you put `ansi2knr' in |
| `AUTOMAKE_OPTIONS' in `Makefile.am'. This permits compiling ANSI |
| C code with a K&R C compiler. |
| |
| `ansi2knr.1' |
| The man page which goes with `ansi2knr.c'. |
| |
| `config.guess' |
| A shell script which determines the configuration name for the |
| system on which it is run. |
| |
| `config.sub' |
| A shell script which canonicalizes a configuration name entered by |
| a user. |
| |
| `elisp-comp' |
| Used to compile Emacs LISP files. |
| |
| `install-sh' |
| A shell script which installs a program. This is used if the |
| configure script can not find an install binary. |
| |
| `ltconfig' |
| Used by libtool. This is a shell script which configures libtool |
| for the particular system on which it is used. |
| |
| `ltmain.sh' |
| Used by libtool. This is the actual libtool script which is used, |
| after it is configured by `ltconfig' to build a library. |
| |
| `mdate-sh' |
| A shell script used by an automake generated `Makefile' to pretty |
| print the modification time of a file. This is used to maintain |
| version numbers for texinfo files. |
| |
| `missing' |
| A shell script used if some tool is missing entirely. This is |
| used by an automake generated `Makefile' to avoid certain sorts of |
| timestamp problems. |
| |
| `mkinstalldirs' |
| A shell script which creates a directory, including all parent |
| directories. This is used by an automake generated `Makefile' |
| during installation. |
| |
| `texinfo.tex' |
| Required if you have any texinfo files. This is used when |
| converting Texinfo files into DVI using `texi2dvi' and TeX. |
| |
| `ylwrap' |
| A shell script used by an automake generated `Makefile' to run |
| programs like `bison', `yacc', `flex', and `lex'. These programs |
| default to producing output files with a fixed name, and the |
| `ylwrap' script runs them in a subdirectory to avoid file name |
| conflicts when using a parallel make program. |
| |
| |
| File: configure.info, Node: Configuration Names, Next: Cross Compilation Tools, Prev: Files, Up: Top |
| |
| 4 Configuration Names |
| ********************* |
| |
| The GNU configure system names all systems using a "configuration |
| name". All such names used to be triplets (they may now contain four |
| parts in certain cases), and the term "configuration triplet" is still |
| seen. |
| |
| * Menu: |
| |
| * Configuration Name Definition:: Configuration Name Definition. |
| * Using Configuration Names:: Using Configuration Names. |
| |
| |
| File: configure.info, Node: Configuration Name Definition, Next: Using Configuration Names, Up: Configuration Names |
| |
| 4.1 Configuration Name Definition |
| ================================= |
| |
| This is a string of the form CPU-MANUFACTURER-OPERATING_SYSTEM. In |
| some cases, this is extended to a four part form: |
| CPU-MANUFACTURER-KERNEL-OPERATING_SYSTEM. |
| |
| When using a configuration name in a configure option, it is normally |
| not necessary to specify an entire name. In particular, the |
| MANUFACTURER field is often omitted, leading to strings such as |
| `i386-linux' or `sparc-sunos'. The shell script `config.sub' will |
| translate these shortened strings into the canonical form. autoconf |
| will arrange for `config.sub' to be run automatically when it is needed. |
| |
| The fields of a configuration name are as follows: |
| |
| CPU |
| The type of processor. This is typically something like `i386' or |
| `sparc'. More specific variants are used as well, such as |
| `mipsel' to indicate a little endian MIPS processor. |
| |
| MANUFACTURER |
| A somewhat freeform field which indicates the manufacturer of the |
| system. This is often simply `unknown'. Other common strings are |
| `pc' for an IBM PC compatible system, or the name of a workstation |
| vendor, such as `sun'. |
| |
| OPERATING_SYSTEM |
| The name of the operating system which is run on the system. This |
| will be something like `solaris2.5' or `irix6.3'. There is no |
| particular restriction on the version number, and strings like |
| `aix4.1.4.0' are seen. For an embedded system, which has no |
| operating system, this field normally indicates the type of object |
| file format, such as `elf' or `coff'. |
| |
| KERNEL |
| This is used mainly for GNU/Linux. A typical GNU/Linux |
| configuration name is `i586-pc-linux-gnulibc1'. In this case the |
| kernel, `linux', is separated from the operating system, |
| `gnulibc1'. |
| |
| The shell script `config.guess' will normally print the correct |
| configuration name for the system on which it is run. It does by |
| running `uname' and by examining other characteristics of the system. |
| |
| Because `config.guess' can normally determine the configuration name |
| for a machine, it is normally only necessary to specify a configuration |
| name when building a cross-compiler or when building using a |
| cross-compiler. |
| |
| |
| File: configure.info, Node: Using Configuration Names, Prev: Configuration Name Definition, Up: Configuration Names |
| |
| 4.2 Using Configuration Names |
| ============================= |
| |
| A configure script will sometimes have to make a decision based on a |
| configuration name. You will need to do this if you have to compile |
| code differently based on something which can not be tested using a |
| standard autoconf feature test. |
| |
| It is normally better to test for particular features, rather than to |
| test for a particular system. This is because as Unix evolves, |
| different systems copy features from one another. Even if you need to |
| determine whether the feature is supported based on a configuration |
| name, you should define a macro which describes the feature, rather than |
| defining a macro which describes the particular system you are on. |
| |
| Testing for a particular system is normally done using a case |
| statement in `configure.in'. The case statement might look something |
| like the following, assuming that `host' is a shell variable holding a |
| canonical configuration name (which will be the case if `configure.in' |
| uses the `AC_CANONICAL_HOST' or `AC_CANONICAL_SYSTEM' macro). |
| |
| case "${host}" in |
| i[3-7]86-*-linux-gnu*) do something ;; |
| sparc*-sun-solaris2.[56789]*) do something ;; |
| sparc*-sun-solaris*) do something ;; |
| mips*-*-elf*) do something ;; |
| esac |
| |
| It is particularly important to use `*' after the operating system |
| field, in order to match the version number which will be generated by |
| `config.guess'. |
| |
| In most cases you must be careful to match a range of processor |
| types. For most processor families, a trailing `*' suffices, as in |
| `mips*' above. For the i386 family, something along the lines of |
| `i[3-7]86' suffices at present. For the m68k family, you will need |
| something like `m68*'. Of course, if you do not need to match on the |
| processor, it is simpler to just replace the entire field by a `*', as |
| in `*-*-irix*'. |
| |
| |
| File: configure.info, Node: Cross Compilation Tools, Next: Canadian Cross, Prev: Configuration Names, Up: Top |
| |
| 5 Cross Compilation Tools |
| ************************* |
| |
| The GNU configure and build system can be used to build "cross |
| compilation" tools. A cross compilation tool is a tool which runs on |
| one system and produces code which runs on another system. |
| |
| * Menu: |
| |
| * Cross Compilation Concepts:: Cross Compilation Concepts. |
| * Host and Target:: Host and Target. |
| * Using the Host Type:: Using the Host Type. |
| * Specifying the Target:: Specifying the Target. |
| * Using the Target Type:: Using the Target Type. |
| * Cross Tools in the Cygnus Tree:: Cross Tools in the Cygnus Tree |
| |
| |
| File: configure.info, Node: Cross Compilation Concepts, Next: Host and Target, Up: Cross Compilation Tools |
| |
| 5.1 Cross Compilation Concepts |
| ============================== |
| |
| A compiler which produces programs which run on a different system is a |
| cross compilation compiler, or simply a "cross compiler". Similarly, |
| we speak of cross assemblers, cross linkers, etc. |
| |
| In the normal case, a compiler produces code which runs on the same |
| system as the one on which the compiler runs. When it is necessary to |
| distinguish this case from the cross compilation case, such a compiler |
| is called a "native compiler". Similarly, we speak of native |
| assemblers, etc. |
| |
| Although the debugger is not strictly speaking a compilation tool, |
| it is nevertheless meaningful to speak of a cross debugger: a debugger |
| which is used to debug code which runs on another system. Everything |
| that is said below about configuring cross compilation tools applies to |
| the debugger as well. |
| |
| |
| File: configure.info, Node: Host and Target, Next: Using the Host Type, Prev: Cross Compilation Concepts, Up: Cross Compilation Tools |
| |
| 5.2 Host and Target |
| =================== |
| |
| When building cross compilation tools, there are two different systems |
| involved: the system on which the tools will run, and the system for |
| which the tools generate code. |
| |
| The system on which the tools will run is called the "host" system. |
| |
| The system for which the tools generate code is called the "target" |
| system. |
| |
| For example, suppose you have a compiler which runs on a GNU/Linux |
| system and generates ELF programs for a MIPS embedded system. In this |
| case the GNU/Linux system is the host, and the MIPS ELF system is the |
| target. Such a compiler could be called a GNU/Linux cross MIPS ELF |
| compiler, or, equivalently, a `i386-linux-gnu' cross `mips-elf' |
| compiler. |
| |
| Naturally, most programs are not cross compilation tools. For those |
| programs, it does not make sense to speak of a target. It only makes |
| sense to speak of a target for tools like `gcc' or the `binutils' which |
| actually produce running code. For example, it does not make sense to |
| speak of the target of a tool like `bison' or `make'. |
| |
| Most cross compilation tools can also serve as native tools. For a |
| native compilation tool, it is still meaningful to speak of a target. |
| For a native tool, the target is the same as the host. For example, for |
| a GNU/Linux native compiler, the host is GNU/Linux, and the target is |
| also GNU/Linux. |
| |
| |
| File: configure.info, Node: Using the Host Type, Next: Specifying the Target, Prev: Host and Target, Up: Cross Compilation Tools |
| |
| 5.3 Using the Host Type |
| ======================= |
| |
| In almost all cases the host system is the system on which you run the |
| `configure' script, and on which you build the tools (for the case when |
| they differ, *note Canadian Cross::). |
| |
| If your configure script needs to know the configuration name of the |
| host system, and the package is not a cross compilation tool and |
| therefore does not have a target, put `AC_CANONICAL_HOST' in |
| `configure.in'. This macro will arrange to define a few shell |
| variables when the `configure' script is run. |
| |
| `host' |
| The canonical configuration name of the host. This will normally |
| be determined by running the `config.guess' shell script, although |
| the user is permitted to override this by using an explicit |
| `--host' option. |
| |
| `host_alias' |
| In the unusual case that the user used an explicit `--host' option, |
| this will be the argument to `--host'. In the normal case, this |
| will be the same as the `host' variable. |
| |
| `host_cpu' |
| `host_vendor' |
| `host_os' |
| The first three parts of the canonical configuration name. |
| |
| The shell variables may be used by putting shell code in |
| `configure.in'. For an example, see *Note Using Configuration Names::. |
| |
| |
| File: configure.info, Node: Specifying the Target, Next: Using the Target Type, Prev: Using the Host Type, Up: Cross Compilation Tools |
| |
| 5.4 Specifying the Target |
| ========================= |
| |
| By default, the `configure' script will assume that the target is the |
| same as the host. This is the more common case; for example, it leads |
| to a native compiler rather than a cross compiler. |
| |
| If you want to build a cross compilation tool, you must specify the |
| target explicitly by using the `--target' option when you run |
| `configure'. The argument to `--target' is the configuration name of |
| the system for which you wish to generate code. *Note Configuration |
| Names::. |
| |
| For example, to build tools which generate code for a MIPS ELF |
| embedded system, you would use `--target mips-elf'. |
| |
| |
| File: configure.info, Node: Using the Target Type, Next: Cross Tools in the Cygnus Tree, Prev: Specifying the Target, Up: Cross Compilation Tools |
| |
| 5.5 Using the Target Type |
| ========================= |
| |
| When writing `configure.in' for a cross compilation tool, you will need |
| to use information about the target. To do this, put |
| `AC_CANONICAL_SYSTEM' in `configure.in'. |
| |
| `AC_CANONICAL_SYSTEM' will look for a `--target' option and |
| canonicalize it using the `config.sub' shell script. It will also run |
| `AC_CANONICAL_HOST' (*note Using the Host Type::). |
| |
| The target type will be recorded in the following shell variables. |
| Note that the host versions of these variables will also be defined by |
| `AC_CANONICAL_HOST'. |
| |
| `target' |
| The canonical configuration name of the target. |
| |
| `target_alias' |
| The argument to the `--target' option. If the user did not specify |
| a `--target' option, this will be the same as `host_alias'. |
| |
| `target_cpu' |
| `target_vendor' |
| `target_os' |
| The first three parts of the canonical target configuration name. |
| |
| Note that if `host' and `target' are the same string, you can assume |
| a native configuration. If they are different, you can assume a cross |
| configuration. |
| |
| It is arguably possible for `host' and `target' to represent the |
| same system, but for the strings to not be identical. For example, if |
| `config.guess' returns `sparc-sun-sunos4.1.4', and somebody configures |
| with `--target sparc-sun-sunos4.1', then the slight differences between |
| the two versions of SunOS may be unimportant for your tool. However, |
| in the general case it can be quite difficult to determine whether the |
| differences between two configuration names are significant or not. |
| Therefore, by convention, if the user specifies a `--target' option |
| without specifying a `--host' option, it is assumed that the user wants |
| to configure a cross compilation tool. |
| |
| The variables `target' and `target_alias' should be handled |
| differently. |
| |
| In general, whenever the user may actually see a string, |
| `target_alias' should be used. This includes anything which may appear |
| in the file system, such as a directory name or part of a tool name. |
| It also includes any tool output, unless it is clearly labelled as the |
| canonical target configuration name. This permits the user to use the |
| `--target' option to specify how the tool will appear to the outside |
| world. |
| |
| On the other hand, when checking for characteristics of the target |
| system, `target' should be used. This is because a wide variety of |
| `--target' options may map into the same canonical configuration name. |
| You should not attempt to duplicate the canonicalization done by |
| `config.sub' in your own code. |
| |
| By convention, cross tools are installed with a prefix of the |
| argument used with the `--target' option, also known as `target_alias' |
| (*note Using the Target Type::). If the user does not use the |
| `--target' option, and thus is building a native tool, no prefix is |
| used. |
| |
| For example, if gcc is configured with `--target mips-elf', then the |
| installed binary will be named `mips-elf-gcc'. If gcc is configured |
| without a `--target' option, then the installed binary will be named |
| `gcc'. |
| |
| The autoconf macro `AC_ARG_PROGRAM' will handle this for you. If |
| you are using automake, no more need be done; the programs will |
| automatically be installed with the correct prefixes. Otherwise, see |
| the autoconf documentation for `AC_ARG_PROGRAM'. |
| |
| |
| File: configure.info, Node: Cross Tools in the Cygnus Tree, Prev: Using the Target Type, Up: Cross Compilation Tools |
| |
| 5.6 Cross Tools in the Cygnus Tree |
| ================================== |
| |
| The Cygnus tree is used for various packages including gdb, the GNU |
| binutils, and egcs. It is also, of course, used for Cygnus releases. |
| |
| In the Cygnus tree, the top level `configure' script uses the old |
| Cygnus configure system, not autoconf. The top level `Makefile.in' is |
| written to build packages based on what is in the source tree, and |
| supports building a large number of tools in a single |
| `configure'/`make' step. |
| |
| The Cygnus tree may be configured with a `--target' option. The |
| `--target' option applies recursively to every subdirectory, and |
| permits building an entire set of cross tools at once. |
| |
| * Menu: |
| |
| * Host and Target Libraries:: Host and Target Libraries. |
| * Target Library Configure Scripts:: Target Library Configure Scripts. |
| * Make Targets in Cygnus Tree:: Make Targets in Cygnus Tree. |
| * Target libiberty:: Target libiberty |
| |
| |
| File: configure.info, Node: Host and Target Libraries, Next: Target Library Configure Scripts, Up: Cross Tools in the Cygnus Tree |
| |
| 5.6.1 Host and Target Libraries |
| ------------------------------- |
| |
| The Cygnus tree distinguishes host libraries from target libraries. |
| |
| Host libraries are built with the compiler used to build the programs |
| which run on the host, which is called the host compiler. This includes |
| libraries such as `bfd' and `tcl'. These libraries are built with the |
| host compiler, and are linked into programs like the binutils or gcc |
| which run on the host. |
| |
| Target libraries are built with the target compiler. If gcc is |
| present in the source tree, then the target compiler is the gcc that is |
| built using the host compiler. Target libraries are libraries such as |
| `newlib' and `libstdc++'. These libraries are not linked into the host |
| programs, but are instead made available for use with programs built |
| with the target compiler. |
| |
| For the rest of this section, assume that gcc is present in the |
| source tree, so that it will be used to build the target libraries. |
| |
| There is a complication here. The configure process needs to know |
| which compiler you are going to use to build a tool; otherwise, the |
| feature tests will not work correctly. The Cygnus tree handles this by |
| not configuring the target libraries until the target compiler is |
| built. In order to permit everything to build using a single |
| `configure'/`make', the configuration of the target libraries is |
| actually triggered during the make step. |
| |
| When the target libraries are configured, the `--target' option is |
| not used. Instead, the `--host' option is used with the argument of |
| the `--target' option for the overall configuration. If no `--target' |
| option was used for the overall configuration, the `--host' option will |
| be passed with the output of the `config.guess' shell script. Any |
| `--build' option is passed down unchanged. |
| |
| This translation of configuration options is done because since the |
| target libraries are compiled with the target compiler, they are being |
| built in order to run on the target of the overall configuration. By |
| the definition of host, this means that their host system is the same as |
| the target system of the overall configuration. |
| |
| The same process is used for both a native configuration and a cross |
| configuration. Even when using a native configuration, the target |
| libraries will be configured and built using the newly built compiler. |
| This is particularly important for the C++ libraries, since there is no |
| reason to assume that the C++ compiler used to build the host tools (if |
| there even is one) uses the same ABI as the g++ compiler which will be |
| used to build the target libraries. |
| |
| There is one difference between a native configuration and a cross |
| configuration. In a native configuration, the target libraries are |
| normally configured and built as siblings of the host tools. In a cross |
| configuration, the target libraries are normally built in a subdirectory |
| whose name is the argument to `--target'. This is mainly for |
| historical reasons. |
| |
| To summarize, running `configure' in the Cygnus tree configures all |
| the host libraries and tools, but does not configure any of the target |
| libraries. Running `make' then does the following steps: |
| |
| * Build the host libraries. |
| |
| * Build the host programs, including gcc. Note that we call gcc |
| both a host program (since it runs on the host) and a target |
| compiler (since it generates code for the target). |
| |
| * Using the newly built target compiler, configure the target |
| libraries. |
| |
| * Build the target libraries. |
| |
| The steps need not be done in precisely this order, since they are |
| actually controlled by `Makefile' targets. |
| |
| |
| File: configure.info, Node: Target Library Configure Scripts, Next: Make Targets in Cygnus Tree, Prev: Host and Target Libraries, Up: Cross Tools in the Cygnus Tree |
| |
| 5.6.2 Target Library Configure Scripts |
| -------------------------------------- |
| |
| There are a few things you must know in order to write a configure |
| script for a target library. This is just a quick sketch, and beginners |
| shouldn't worry if they don't follow everything here. |
| |
| The target libraries are configured and built using a newly built |
| target compiler. There may not be any startup files or libraries for |
| this target compiler. In fact, those files will probably be built as |
| part of some target library, which naturally means that they will not |
| exist when your target library is configured. |
| |
| This means that the configure script for a target library may not use |
| any test which requires doing a link. This unfortunately includes many |
| useful autoconf macros, such as `AC_CHECK_FUNCS'. autoconf macros |
| which do a compile but not a link, such as `AC_CHECK_HEADERS', may be |
| used. |
| |
| This is a severe restriction, but normally not a fatal one, as target |
| libraries can often assume the presence of other target libraries, and |
| thus know which functions will be available. |
| |
| As of this writing, the autoconf macro `AC_PROG_CC' does a link to |
| make sure that the compiler works. This may fail in a target library, |
| so target libraries must use a different set of macros to locate the |
| compiler. See the `configure.in' file in a directory like `libiberty' |
| or `libgloss' for an example. |
| |
| As noted in the previous section, target libraries are sometimes |
| built in directories which are siblings to the host tools, and are |
| sometimes built in a subdirectory. The `--with-target-subdir' configure |
| option will be passed when the library is configured. Its value will be |
| an empty string if the target library is a sibling. Its value will be |
| the name of the subdirectory if the target library is in a subdirectory. |
| |
| If the overall build is not a native build (i.e., the overall |
| configure used the `--target' option), then the library will be |
| configured with the `--with-cross-host' option. The value of this |
| option will be the host system of the overall build. Recall that the |
| host system of the library will be the target of the overall build. If |
| the overall build is a native build, the `--with-cross-host' option |
| will not be used. |
| |
| A library which can be built both standalone and as a target library |
| may want to install itself into different directories depending upon the |
| case. When built standalone, or when built native, the library should |
| be installed in `$(libdir)'. When built as a target library which is |
| not native, the library should be installed in `$(tooldir)/lib'. The |
| `--with-cross-host' option may be used to distinguish these cases. |
| |
| This same test of `--with-cross-host' may be used to see whether it |
| is OK to use link tests in the configure script. If the |
| `--with-cross-host' option is not used, then the library is being built |
| either standalone or native, and a link should work. |
| |
| |
| File: configure.info, Node: Make Targets in Cygnus Tree, Next: Target libiberty, Prev: Target Library Configure Scripts, Up: Cross Tools in the Cygnus Tree |
| |
| 5.6.3 Make Targets in Cygnus Tree |
| --------------------------------- |
| |
| The top level `Makefile' in the Cygnus tree defines targets for every |
| known subdirectory. |
| |
| For every subdirectory DIR which holds a host library or program, |
| the `Makefile' target `all-DIR' will build that library or program. |
| |
| There are dependencies among host tools. For example, building gcc |
| requires first building gas, because the gcc build process invokes the |
| target assembler. These dependencies are reflected in the top level |
| `Makefile'. |
| |
| For every subdirectory DIR which holds a target library, the |
| `Makefile' target `configure-target-DIR' will configure that library. |
| The `Makefile' target `all-target-DIR' will build that library. |
| |
| Every `configure-target-DIR' target depends upon `all-gcc', since |
| gcc, the target compiler, is required to configure the tool. Every |
| `all-target-DIR' target depends upon the corresponding |
| `configure-target-DIR' target. |
| |
| There are several other targets which may be of interest for each |
| directory: `install-DIR', `clean-DIR', and `check-DIR'. There are also |
| corresponding `target' versions of these for the target libraries , |
| such as `install-target-DIR'. |
| |
| |
| File: configure.info, Node: Target libiberty, Prev: Make Targets in Cygnus Tree, Up: Cross Tools in the Cygnus Tree |
| |
| 5.6.4 Target libiberty |
| ---------------------- |
| |
| The `libiberty' subdirectory is currently a special case, in that it is |
| the only directory which is built both using the host compiler and |
| using the target compiler. |
| |
| This is because the files in `libiberty' are used when building the |
| host tools, and they are also incorporated into the `libstdc++' target |
| library as support code. |
| |
| This duality does not pose any particular difficulties. It means |
| that there are targets for both `all-libiberty' and |
| `all-target-libiberty'. |
| |
| In a native configuration, when target libraries are not built in a |
| subdirectory, the same objects are normally used as both the host build |
| and the target build. This is normally OK, since libiberty contains |
| only C code, and in a native configuration the results of the host |
| compiler and the target compiler are normally interoperable. |
| |
| Irix 6 is again an exception here, since the SGI native compiler |
| defaults to using the `O32' ABI, and gcc defaults to using the `N32' |
| ABI. On Irix 6, the target libraries are built in a subdirectory even |
| for a native configuration, avoiding this problem. |
| |
| There are currently no other libraries built for both the host and |
| the target, but there is no conceptual problem with adding more. |
| |
| |
| File: configure.info, Node: Canadian Cross, Next: Cygnus Configure, Prev: Cross Compilation Tools, Up: Top |
| |
| 6 Canadian Cross |
| **************** |
| |
| It is possible to use the GNU configure and build system to build a |
| program which will run on a system which is different from the system on |
| which the tools are built. In other words, it is possible to build |
| programs using a cross compiler. |
| |
| This is referred to as a "Canadian Cross". |
| |
| * Menu: |
| |
| * Canadian Cross Example:: Canadian Cross Example. |
| * Canadian Cross Concepts:: Canadian Cross Concepts. |
| * Build Cross Host Tools:: Build Cross Host Tools. |
| * Build and Host Options:: Build and Host Options. |
| * CCross not in Cygnus Tree:: Canadian Cross not in Cygnus Tree. |
| * CCross in Cygnus Tree:: Canadian Cross in Cygnus Tree. |
| * Supporting Canadian Cross:: Supporting Canadian Cross. |
| |
| |
| File: configure.info, Node: Canadian Cross Example, Next: Canadian Cross Concepts, Up: Canadian Cross |
| |
| 6.1 Canadian Cross Example |
| ========================== |
| |
| Here is an example of a Canadian Cross. |
| |
| While running on a GNU/Linux, you can build a program which will run |
| on a Solaris system. You would use a GNU/Linux cross Solaris compiler |
| to build the program. |
| |
| Of course, you could not run the resulting program on your GNU/Linux |
| system. You would have to copy it over to a Solaris system before you |
| would run it. |
| |
| Of course, you could also simply build the programs on the Solaris |
| system in the first place. However, perhaps the Solaris system is not |
| available for some reason; perhaps you actually don't have one, but you |
| want to build the tools for somebody else to use. Or perhaps your |
| GNU/Linux system is much faster than your Solaris system. |
| |
| A Canadian Cross build is most frequently used when building |
| programs to run on a non-Unix system, such as DOS or Windows. It may |
| be simpler to configure and build on a Unix system than to support the |
| configuration machinery on a non-Unix system. |
| |
| |
| File: configure.info, Node: Canadian Cross Concepts, Next: Build Cross Host Tools, Prev: Canadian Cross Example, Up: Canadian Cross |
| |
| 6.2 Canadian Cross Concepts |
| =========================== |
| |
| When building a Canadian Cross, there are at least two different systems |
| involved: the system on which the tools are being built, and the system |
| on which the tools will run. |
| |
| The system on which the tools are being built is called the "build" |
| system. |
| |
| The system on which the tools will run is called the host system. |
| |
| For example, if you are building a Solaris program on a GNU/Linux |
| system, as in the previous section, the build system would be GNU/Linux, |
| and the host system would be Solaris. |
| |
| It is, of course, possible to build a cross compiler using a Canadian |
| Cross (i.e., build a cross compiler using a cross compiler). In this |
| case, the system for which the resulting cross compiler generates code |
| is called the target system. (For a more complete discussion of host |
| and target systems, *note Host and Target::). |
| |
| An example of building a cross compiler using a Canadian Cross would |
| be building a Windows cross MIPS ELF compiler on a GNU/Linux system. In |
| this case the build system would be GNU/Linux, the host system would be |
| Windows, and the target system would be MIPS ELF. |
| |
| The name Canadian Cross comes from the case when the build, host, and |
| target systems are all different. At the time that these issues were |
| all being hashed out, Canada had three national political parties. |
| |
| |
| File: configure.info, Node: Build Cross Host Tools, Next: Build and Host Options, Prev: Canadian Cross Concepts, Up: Canadian Cross |
| |
| 6.3 Build Cross Host Tools |
| ========================== |
| |
| In order to configure a program for a Canadian Cross build, you must |
| first build and install the set of cross tools you will use to build the |
| program. |
| |
| These tools will be build cross host tools. That is, they will run |
| on the build system, and will produce code that runs on the host system. |
| |
| It is easy to confuse the meaning of build and host here. Always |
| remember that the build system is where you are doing the build, and the |
| host system is where the resulting program will run. Therefore, you |
| need a build cross host compiler. |
| |
| In general, you must have a complete cross environment in order to do |
| the build. This normally means a cross compiler, cross assembler, and |
| so forth, as well as libraries and include files for the host system. |
| |
| |
| File: configure.info, Node: Build and Host Options, Next: CCross not in Cygnus Tree, Prev: Build Cross Host Tools, Up: Canadian Cross |
| |
| 6.4 Build and Host Options |
| ========================== |
| |
| When you run `configure', you must use both the `--build' and `--host' |
| options. |
| |
| The `--build' option is used to specify the configuration name of |
| the build system. This can normally be the result of running the |
| `config.guess' shell script, and it is reasonable to use |
| `--build=`config.guess`'. |
| |
| The `--host' option is used to specify the configuration name of the |
| host system. |
| |
| As we explained earlier, `config.guess' is used to set the default |
| value for the `--host' option (*note Using the Host Type::). We can |
| now see that since `config.guess' returns the type of system on which |
| it is run, it really identifies the build system. Since the host |
| system is normally the same as the build system (i.e., people do not |
| normally build using a cross compiler), it is reasonable to use the |
| result of `config.guess' as the default for the host system when the |
| `--host' option is not used. |
| |
| It might seem that if the `--host' option were used without the |
| `--build' option that the configure script could run `config.guess' to |
| determine the build system, and presume a Canadian Cross if the result |
| of `config.guess' differed from the `--host' option. However, for |
| historical reasons, some configure scripts are routinely run using an |
| explicit `--host' option, rather than using the default from |
| `config.guess'. As noted earlier, it is difficult or impossible to |
| reliably compare configuration names (*note Using the Target Type::). |
| Therefore, by convention, if the `--host' option is used, but the |
| `--build' option is not used, then the build system defaults to the |
| host system. |
| |
| |
| File: configure.info, Node: CCross not in Cygnus Tree, Next: CCross in Cygnus Tree, Prev: Build and Host Options, Up: Canadian Cross |
| |
| 6.5 Canadian Cross not in Cygnus Tree. |
| ====================================== |
| |
| If you are not using the Cygnus tree, you must explicitly specify the |
| cross tools which you want to use to build the program. This is done by |
| setting environment variables before running the `configure' script. |
| |
| You must normally set at least the environment variables `CC', `AR', |
| and `RANLIB' to the cross tools which you want to use to build. |
| |
| For some programs, you must set additional cross tools as well, such |
| as `AS', `LD', or `NM'. |
| |
| You would set these environment variables to the build cross tools |
| which you are going to use. |
| |
| For example, if you are building a Solaris program on a GNU/Linux |
| system, and your GNU/Linux cross Solaris compiler were named |
| `solaris-gcc', then you would set the environment variable `CC' to |
| `solaris-gcc'. |
| |
| |
| File: configure.info, Node: CCross in Cygnus Tree, Next: Supporting Canadian Cross, Prev: CCross not in Cygnus Tree, Up: Canadian Cross |
| |
| 6.6 Canadian Cross in Cygnus Tree |
| ================================= |
| |
| This section describes configuring and building a Canadian Cross when |
| using the Cygnus tree. |
| |
| * Menu: |
| |
| * Standard Cygnus CCross:: Building a Normal Program. |
| * Cross Cygnus CCross:: Building a Cross Program. |
| |
| |
| File: configure.info, Node: Standard Cygnus CCross, Next: Cross Cygnus CCross, Up: CCross in Cygnus Tree |
| |
| 6.6.1 Building a Normal Program |
| ------------------------------- |
| |
| When configuring a Canadian Cross in the Cygnus tree, all the |
| appropriate environment variables are automatically set to `HOST-TOOL', |
| where HOST is the value used for the `--host' option, and TOOL is the |
| name of the tool (e.g., `gcc', `as', etc.). These tools must be on |
| your `PATH'. |
| |
| Adding a prefix of HOST will give the usual name for the build cross |
| host tools. To see this, consider that when these cross tools were |
| built, they were configured to run on the build system and to produce |
| code for the host system. That is, they were configured with a |
| `--target' option that is the same as the system which we are now |
| calling the host. Recall that the default name for installed cross |
| tools uses the target system as a prefix (*note Using the Target |
| Type::). Since that is the system which we are now calling the host, |
| HOST is the right prefix to use. |
| |
| For example, if you configure with `--build=i386-linux-gnu' and |
| `--host=solaris', then the Cygnus tree will automatically default to |
| using the compiler `solaris-gcc'. You must have previously built and |
| installed this compiler, probably by doing a build with no `--host' |
| option and with a `--target' option of `solaris'. |
| |
| |
| File: configure.info, Node: Cross Cygnus CCross, Prev: Standard Cygnus CCross, Up: CCross in Cygnus Tree |
| |
| 6.6.2 Building a Cross Program |
| ------------------------------ |
| |
| There are additional considerations if you want to build a cross |
| compiler, rather than a native compiler, in the Cygnus tree using a |
| Canadian Cross. |
| |
| When you build a cross compiler using the Cygnus tree, then the |
| target libraries will normally be built with the newly built target |
| compiler (*note Host and Target Libraries::). However, this will not |
| work when building with a Canadian Cross. This is because the newly |
| built target compiler will be a program which runs on the host system, |
| and therefore will not be able to run on the build system. |
| |
| Therefore, when building a cross compiler with the Cygnus tree, you |
| must first install a set of build cross target tools. These tools will |
| be used when building the target libraries. |
| |
| Note that this is not a requirement of a Canadian Cross in general. |
| For example, it would be possible to build just the host cross target |
| tools on the build system, to copy the tools to the host system, and to |
| build the target libraries on the host system. The requirement for |
| build cross target tools is imposed by the Cygnus tree, which expects |
| to be able to build both host programs and target libraries in a single |
| `configure'/`make' step. Because it builds these in a single step, it |
| expects to be able to build the target libraries on the build system, |
| which means that it must use a build cross target toolchain. |
| |
| For example, suppose you want to build a Windows cross MIPS ELF |
| compiler on a GNU/Linux system. You must have previously installed |
| both a GNU/Linux cross Windows compiler and a GNU/Linux cross MIPS ELF |
| compiler. |
| |
| In order to build the Windows (configuration name `i386-cygwin32') |
| cross MIPS ELF (configure name `mips-elf') compiler, you might execute |
| the following commands (long command lines are broken across lines with |
| a trailing backslash as a continuation character). |
| |
| mkdir linux-x-cygwin32 |
| cd linux-x-cygwin32 |
| SRCDIR/configure --target i386-cygwin32 --prefix=INSTALLDIR \ |
| --exec-prefix=INSTALLDIR/H-i386-linux |
| make |
| make install |
| cd .. |
| mkdir linux-x-mips-elf |
| cd linux-x-mips-elf |
| SRCDIR/configure --target mips-elf --prefix=INSTALLDIR \ |
| --exec-prefix=INSTALLDIR/H-i386-linux |
| make |
| make install |
| cd .. |
| mkdir cygwin32-x-mips-elf |
| cd cygwin32-x-mips-elf |
| SRCDIR/configure --build=i386-linux-gnu --host=i386-cygwin32 \ |
| --target=mips-elf --prefix=WININSTALLDIR \ |
| --exec-prefix=WININSTALLDIR/H-i386-cygwin32 |
| make |
| make install |
| |
| You would then copy the contents of WININSTALLDIR over to the |
| Windows machine, and run the resulting programs. |
| |
| |
| File: configure.info, Node: Supporting Canadian Cross, Prev: CCross in Cygnus Tree, Up: Canadian Cross |
| |
| 6.7 Supporting Canadian Cross |
| ============================= |
| |
| If you want to make it possible to build a program you are developing |
| using a Canadian Cross, you must take some care when writing your |
| configure and make rules. Simple cases will normally work correctly. |
| However, it is not hard to write configure and make tests which will |
| fail in a Canadian Cross. |
| |
| * Menu: |
| |
| * CCross in Configure:: Supporting Canadian Cross in Configure Scripts. |
| * CCross in Make:: Supporting Canadian Cross in Makefiles. |
| |
| |
| File: configure.info, Node: CCross in Configure, Next: CCross in Make, Up: Supporting Canadian Cross |
| |
| 6.7.1 Supporting Canadian Cross in Configure Scripts |
| ---------------------------------------------------- |
| |
| In a `configure.in' file, after calling `AC_PROG_CC', you can find out |
| whether this is a Canadian Cross configure by examining the shell |
| variable `cross_compiling'. In a Canadian Cross, which means that the |
| compiler is a cross compiler, `cross_compiling' will be `yes'. In a |
| normal configuration, `cross_compiling' will be `no'. |
| |
| You ordinarily do not need to know the type of the build system in a |
| configure script. However, if you do need that information, you can get |
| it by using the macro `AC_CANONICAL_SYSTEM', the same macro that is |
| used to determine the target system. This macro will set the variables |
| `build', `build_alias', `build_cpu', `build_vendor', and `build_os', |
| which correspond to the similar `target' and `host' variables, except |
| that they describe the build system. |
| |
| When writing tests in `configure.in', you must remember that you |
| want to test the host environment, not the build environment. |
| |
| Macros like `AC_CHECK_FUNCS' which use the compiler will test the |
| host environment. That is because the tests will be done by running the |
| compiler, which is actually a build cross host compiler. If the |
| compiler can find the function, that means that the function is present |
| in the host environment. |
| |
| Tests like `test -f /dev/ptyp0', on the other hand, will test the |
| build environment. Remember that the configure script is running on the |
| build system, not the host system. If your configure scripts examines |
| files, those files will be on the build system. Whatever you determine |
| based on those files may or may not be the case on the host system. |
| |
| Most autoconf macros will work correctly for a Canadian Cross. The |
| main exception is `AC_TRY_RUN'. This macro tries to compile and run a |
| test program. This will fail in a Canadian Cross, because the program |
| will be compiled for the host system, which means that it will not run |
| on the build system. |
| |
| The `AC_TRY_RUN' macro provides an optional argument to tell the |
| configure script what to do in a Canadian Cross. If that argument is |
| not present, you will get a warning when you run `autoconf': |
| warning: AC_TRY_RUN called without default to allow cross compiling |
| This tells you that the resulting `configure' script will not work |
| with a Canadian Cross. |
| |
| In some cases while it may better to perform a test at configure |
| time, it is also possible to perform the test at run time. In such a |
| case you can use the cross compiling argument to `AC_TRY_RUN' to tell |
| your program that the test could not be performed at configure time. |
| |
| There are a few other autoconf macros which will not work correctly |
| with a Canadian Cross: a partial list is `AC_FUNC_GETPGRP', |
| `AC_FUNC_SETPGRP', `AC_FUNC_SETVBUF_REVERSED', and |
| `AC_SYS_RESTARTABLE_SYSCALLS'. The `AC_CHECK_SIZEOF' macro is |
| generally not very useful with a Canadian Cross; it permits an optional |
| argument indicating the default size, but there is no way to know what |
| the correct default should be. |
| |
| |
| File: configure.info, Node: CCross in Make, Prev: CCross in Configure, Up: Supporting Canadian Cross |
| |
| 6.7.2 Supporting Canadian Cross in Makefiles. |
| --------------------------------------------- |
| |
| The main Canadian Cross issue in a `Makefile' arises when you want to |
| use a subsidiary program to generate code or data which you will then |
| include in your real program. |
| |
| If you compile this subsidiary program using `$(CC)' in the usual |
| way, you will not be able to run it. This is because `$(CC)' will |
| build a program for the host system, but the program is being built on |
| the build system. |
| |
| You must instead use a compiler for the build system, rather than the |
| host system. In the Cygnus tree, this make variable `$(CC_FOR_BUILD)' |
| will hold a compiler for the build system. |
| |
| Note that you should not include `config.h' in a file you are |
| compiling with `$(CC_FOR_BUILD)'. The `configure' script will build |
| `config.h' with information for the host system. However, you are |
| compiling the file using a compiler for the build system (a native |
| compiler). Subsidiary programs are normally simple filters which do no |
| user interaction, and it is normally possible to write them in a highly |
| portable fashion so that the absence of `config.h' is not crucial. |
| |
| The gcc `Makefile.in' shows a complex situation in which certain |
| files, such as `rtl.c', must be compiled into both subsidiary programs |
| run on the build system and into the final program. This approach may |
| be of interest for advanced build system hackers. Note that the build |
| system compiler is rather confusingly called `HOST_CC'. |
| |
| |
| File: configure.info, Node: Cygnus Configure, Next: Multilibs, Prev: Canadian Cross, Up: Top |
| |
| 7 Cygnus Configure |
| ****************** |
| |
| The Cygnus configure script predates autoconf. All of its interesting |
| features have been incorporated into autoconf. No new programs should |
| be written to use the Cygnus configure script. |
| |
| However, the Cygnus configure script is still used in a few places: |
| at the top of the Cygnus tree and in a few target libraries in the |
| Cygnus tree. Until those uses have been replaced with autoconf, some |
| brief notes are appropriate here. This is not complete documentation, |
| but it should be possible to use this as a guide while examining the |
| scripts themselves. |
| |
| * Menu: |
| |
| * Cygnus Configure Basics:: Cygnus Configure Basics. |
| * Cygnus Configure in C++ Libraries:: Cygnus Configure in C++ Libraries. |
| |
| |
| File: configure.info, Node: Cygnus Configure Basics, Next: Cygnus Configure in C++ Libraries, Up: Cygnus Configure |
| |
| 7.1 Cygnus Configure Basics |
| =========================== |
| |
| Cygnus configure does not use any generated files; there is no program |
| corresponding to `autoconf'. Instead, there is a single shell script |
| named `configure' which may be found at the top of the Cygnus tree. |
| This shell script was written by hand; it was not generated by |
| autoconf, and it is incorrect, and indeed harmful, to run `autoconf' in |
| the top level of a Cygnus tree. |
| |
| Cygnus configure works in a particular directory by examining the |
| file `configure.in' in that directory. That file is broken into four |
| separate shell scripts. |
| |
| The first is the contents of `configure.in' up to a line that starts |
| with `# per-host:'. This is the common part. |
| |
| The second is the rest of `configure.in' up to a line that starts |
| with `# per-target:'. This is the per host part. |
| |
| The third is the rest of `configure.in' up to a line that starts |
| with `# post-target:'. This is the per target part. |
| |
| The fourth is the remainder of `configure.in'. This is the post |
| target part. |
| |
| If any of these comment lines are missing, the corresponding shell |
| script is empty. |
| |
| Cygnus configure will first execute the common part. This must set |
| the shell variable `srctrigger' to the name of a source file, to |
| confirm that Cygnus configure is looking at the right directory. This |
| may set the shell variables `package_makefile_frag' and |
| `package_makefile_rules_frag'. |
| |
| Cygnus configure will next set the `build' and `host' shell |
| variables, and execute the per host part. This may set the shell |
| variable `host_makefile_frag'. |
| |
| Cygnus configure will next set the `target' variable, and execute |
| the per target part. This may set the shell variable |
| `target_makefile_frag'. |
| |
| Any of these scripts may set the `subdirs' shell variable. This |
| variable is a list of subdirectories where a `Makefile.in' file may be |
| found. Cygnus configure will automatically look for a `Makefile.in' |
| file in the current directory. The `subdirs' shell variable is not |
| normally used, and I believe that the only directory which uses it at |
| present is `newlib'. |
| |
| For each `Makefile.in', Cygnus configure will automatically create a |
| `Makefile' by adding definitions for `make' variables such as `host' |
| and `target', and automatically editing the values of `make' variables |
| such as `prefix' if they are present. |
| |
| Also, if any of the `makefile_frag' shell variables are set, Cygnus |
| configure will interpret them as file names relative to either the |
| working directory or the source directory, and will read the contents of |
| the file into the generated `Makefile'. The file contents will be read |
| in after the first line in `Makefile.in' which starts with `####'. |
| |
| These `Makefile' fragments are used to customize behaviour for a |
| particular host or target. They serve to select particular files to |
| compile, and to define particular preprocessor macros by providing |
| values for `make' variables which are then used during compilation. |
| Cygnus configure, unlike autoconf, normally does not do feature tests, |
| and normally requires support to be added manually for each new host. |
| |
| The `Makefile' fragment support is similar to the autoconf |
| `AC_SUBST_FILE' macro. |
| |
| After creating each `Makefile', the post target script will be run |
| (i.e., it may be run several times). This script may further customize |
| the `Makefile'. When it is run, the shell variable `Makefile' will |
| hold the name of the `Makefile', including the appropriate directory |
| component. |
| |
| Like an autoconf generated `configure' script, Cygnus configure will |
| create a file named `config.status' which, when run, will automatically |
| recreate the configuration. The `config.status' file will simply |
| execute the Cygnus configure script again with the appropriate |
| arguments. |
| |
| Any of the parts of `configure.in' may set the shell variables |
| `files' and `links'. Cygnus configure will set up symlinks from the |
| names in `links' to the files named in `files'. This is similar to the |
| autoconf `AC_LINK_FILES' macro. |
| |
| Finally, any of the parts of `configure.in' may set the shell |
| variable `configdirs' to a set of subdirectories. If it is set, Cygnus |
| configure will recursively run the configure process in each |
| subdirectory. If the subdirectory uses Cygnus configure, it will |
| contain a `configure.in' file but no `configure' file, in which case |
| Cygnus configure will invoke itself recursively. If the subdirectory |
| has a `configure' file, Cygnus configure assumes that it is an autoconf |
| generated `configure' script, and simply invokes it directly. |
| |
| |
| File: configure.info, Node: Cygnus Configure in C++ Libraries, Prev: Cygnus Configure Basics, Up: Cygnus Configure |
| |
| 7.2 Cygnus Configure in C++ Libraries |
| ===================================== |
| |
| The C++ library configure system, written by Per Bothner, deserves |
| special mention. It uses Cygnus configure, but it does feature testing |
| like that done by autoconf generated `configure' scripts. This |
| approach is used in the libraries `libio', `libstdc++', and `libg++'. |
| |
| Most of the `Makefile' information is written out by the shell |
| script `libio/config.shared'. Each `configure.in' file sets certain |
| shell variables, and then invokes `config.shared' to create two package |
| `Makefile' fragments. These fragments are then incorporated into the |
| resulting `Makefile' by the Cygnus configure script. |
| |
| The file `_G_config.h' is created in the `libio' object directory by |
| running the shell script `libio/gen-params'. This shell script uses |
| feature tests to define macros and typedefs in `_G_config.h'. |
| |
| |
| File: configure.info, Node: Multilibs, Next: FAQ, Prev: Cygnus Configure, Up: Top |
| |
| 8 Multilibs |
| *********** |
| |
| For some targets gcc may have different processor requirements depending |
| upon command line options. An obvious example is the `-msoft-float' |
| option supported on several processors. This option means that the |
| floating point registers are not available, which means that floating |
| point operations must be done by calling an emulation subroutine rather |
| than by using machine instructions. |
| |
| For such options, gcc is often configured to compile target libraries |
| twice: once with `-msoft-float' and once without. When gcc compiles |
| target libraries more than once, the resulting libraries are called |
| "multilibs". |
| |
| Multilibs are not really part of the GNU configure and build system, |
| but we discuss them here since they require support in the `configure' |
| scripts and `Makefile's used for target libraries. |
| |
| * Menu: |
| |
| * Multilibs in gcc:: Multilibs in gcc. |
| * Multilibs in Target Libraries:: Multilibs in Target Libraries. |
| |
| |
| File: configure.info, Node: Multilibs in gcc, Next: Multilibs in Target Libraries, Up: Multilibs |
| |
| 8.1 Multilibs in gcc |
| ==================== |
| |
| In gcc, multilibs are defined by setting the variable |
| `MULTILIB_OPTIONS' in the target `Makefile' fragment. Several other |
| `MULTILIB' variables may also be defined there. *Note The Target |
| Makefile Fragment: (gcc)Target Fragment. |
| |
| If you have built gcc, you can see what multilibs it uses by running |
| it with the `-print-multi-lib' option. The output `.;' means that no |
| multilibs are used. In general, the output is a sequence of lines, one |
| per multilib. The first part of each line, up to the `;', is the name |
| of the multilib directory. The second part is a list of compiler |
| options separated by `@' characters. |
| |
| Multilibs are built in a tree of directories. The top of the tree, |
| represented by `.' in the list of multilib directories, is the default |
| library to use when no special compiler options are used. The |
| subdirectories of the tree hold versions of the library to use when |
| particular compiler options are used. |
| |
| |
| File: configure.info, Node: Multilibs in Target Libraries, Prev: Multilibs in gcc, Up: Multilibs |
| |
| 8.2 Multilibs in Target Libraries |
| ================================= |
| |
| The target libraries in the Cygnus tree are automatically built with |
| multilibs. That means that each library is built multiple times. |
| |
| This default is set in the top level `configure.in' file, by adding |
| `--enable-multilib' to the list of arguments passed to configure when |
| it is run for the target libraries (*note Host and Target Libraries::). |
| |
| Each target library uses the shell script `config-ml.in', written by |
| Doug Evans, to prepare to build target libraries. This shell script is |
| invoked after the `Makefile' has been created by the `configure' |
| script. If multilibs are not enabled, it does nothing, otherwise it |
| modifies the `Makefile' to support multilibs. |
| |
| The `config-ml.in' script makes one copy of the `Makefile' for each |
| multilib in the appropriate subdirectory. When configuring in the |
| source directory (which is not recommended), it will build a symlink |
| tree of the sources in each subdirectory. |
| |
| The `config-ml.in' script sets several variables in the various |
| `Makefile's. The `Makefile.in' must have definitions for these |
| variables already; `config-ml.in' simply changes the existing values. |
| The `Makefile' should use default values for these variables which will |
| do the right thing in the subdirectories. |
| |
| `MULTISRCTOP' |
| `config-ml.in' will set this to a sequence of `../' strings, where |
| the number of strings is the number of multilib levels in the |
| source tree. The default value should be the empty string. |
| |
| `MULTIBUILDTOP' |
| `config-ml.in' will set this to a sequence of `../' strings, where |
| the number of strings is number of multilib levels in the object |
| directory. The default value should be the empty string. This |
| will differ from `MULTISRCTOP' when configuring in the source tree |
| (which is not recommended). |
| |
| `MULTIDIRS' |
| In the top level `Makefile' only, `config-ml.in' will set this to |
| the list of multilib subdirectories. The default value should be |
| the empty string. |
| |
| `MULTISUBDIR' |
| `config-ml.in' will set this to the installed subdirectory name to |
| use for this subdirectory, with a leading `/'. The default value |
| shold be the empty string. |
| |
| `MULTIDO' |
| `MULTICLEAN' |
| In the top level `Makefile' only, `config-ml.in' will set these |
| variables to commands to use when doing a recursive make. These |
| variables should both default to the string `true', so that by |
| default nothing happens. |
| |
| All references to the parent of the source directory should use the |
| variable `MULTISRCTOP'. Instead of writing `$(srcdir)/..', you must |
| write `$(srcdir)/$(MULTISRCTOP)..'. |
| |
| Similarly, references to the parent of the object directory should |
| use the variable `MULTIBUILDTOP'. |
| |
| In the installation target, the libraries should be installed in the |
| subdirectory `MULTISUBDIR'. Instead of installing |
| `$(libdir)/libfoo.a', install `$(libdir)$(MULTISUBDIR)/libfoo.a'. |
| |
| The `config-ml.in' script also modifies the top level `Makefile' to |
| add `multi-do' and `multi-clean' targets which are used when building |
| multilibs. |
| |
| The default target of the `Makefile' should include the following |
| command: |
| @$(MULTIDO) $(FLAGS_TO_PASS) DO=all multi-do |
| This assumes that `$(FLAGS_TO_PASS)' is defined as a set of |
| variables to pass to a recursive invocation of `make'. This will build |
| all the multilibs. Note that the default value of `MULTIDO' is `true', |
| so by default this command will do nothing. It will only do something |
| in the top level `Makefile' if multilibs were enabled. |
| |
| The `install' target of the `Makefile' should include the following |
| command: |
| @$(MULTIDO) $(FLAGS_TO_PASS) DO=install multi-do |
| |
| In general, any operation, other than clean, which should be |
| performed on all the multilibs should use a `$(MULTIDO)' line, setting |
| the variable `DO' to the target of each recursive call to `make'. |
| |
| The `clean' targets (`clean', `mostlyclean', etc.) should use |
| `$(MULTICLEAN)'. For example, the `clean' target should do this: |
| @$(MULTICLEAN) DO=clean multi-clean |
| |
| |
| File: configure.info, Node: FAQ, Next: Index, Prev: Multilibs, Up: Top |
| |
| 9 Frequently Asked Questions |
| **************************** |
| |
| Which do I run first, `autoconf' or `automake'? |
| Except when you first add autoconf or automake support to a |
| package, you shouldn't run either by hand. Instead, configure |
| with the `--enable-maintainer-mode' option, and let `make' take |
| care of it. |
| |
| `autoconf' says something about undefined macros. |
| This means that you have macros in your `configure.in' which are |
| not defined by `autoconf'. You may be using an old version of |
| `autoconf'; try building and installing a newer one. Make sure the |
| newly installled `autoconf' is first on your `PATH'. Also, see |
| the next question. |
| |
| My `configure' script has stuff like `CY_GNU_GETTEXT' in it. |
| This means that you have macros in your `configure.in' which should |
| be defined in your `aclocal.m4' file, but aren't. This usually |
| means that `aclocal' was not able to appropriate definitions of the |
| macros. Make sure that you have installed all the packages you |
| need. In particular, make sure that you have installed libtool |
| (this is where `AM_PROG_LIBTOOL' is defined) and gettext (this is |
| where `CY_GNU_GETTEXT' is defined, at least in the Cygnus version |
| of gettext). |
| |
| My `Makefile' has `@' characters in it. |
| This may mean that you tried to use an autoconf substitution in |
| your `Makefile.in' without adding the appropriate `AC_SUBST' call |
| to your `configure' script. Or it may just mean that you need to |
| rebuild `Makefile' in your build directory. To rebuild `Makefile' |
| from `Makefile.in', run the shell script `config.status' with no |
| arguments. If you need to force `configure' to run again, first |
| run `config.status --recheck'. These runs are normally done |
| automatically by `Makefile' targets, but if your `Makefile' has |
| gotten messed up you'll need to help them along. |
| |
| Why do I have to run both `config.status --recheck' and `config.status'? |
| Normally, you don't; they will be run automatically by `Makefile' |
| targets. If you do need to run them, use `config.status --recheck' |
| to run the `configure' script again with the same arguments as the |
| first time you ran it. Use `config.status' (with no arguments) to |
| regenerate all files (`Makefile', `config.h', etc.) based on the |
| results of the configure script. The two cases are separate |
| because it isn't always necessary to regenerate all the files |
| after running `config.status --recheck'. The `Makefile' targets |
| generated by automake will use the environment variables |
| `CONFIG_FILES' and `CONFIG_HEADERS' to only regenerate files as |
| they are needed. |
| |
| What is the Cygnus tree? |
| The Cygnus tree is used for various packages including gdb, the GNU |
| binutils, and egcs. It is also, of course, used for Cygnus |
| releases. It is the build system which was developed at Cygnus, |
| using the Cygnus configure script. It permits building many |
| different packages with a single configure and make. The |
| configure scripts in the tree are being converted to autoconf, but |
| the general build structure remains intact. |
| |
| Why do I have to keep rebuilding and reinstalling the tools? |
| I know, it's a pain. Unfortunately, there are bugs in the tools |
| themselves which need to be fixed, and each time that happens |
| everybody who uses the tools need to reinstall new versions of |
| them. I don't know if there is going to be a clever fix until the |
| tools stabilize. |
| |
| Why not just have a Cygnus tree `make' target to update the tools? |
| The tools unfortunately need to be installed before they can be |
| used. That means that they must be built using an appropriate |
| prefix, and it seems unwise to assume that every configuration |
| uses an appropriate prefix. It might be possible to make them |
| work in place, or it might be possible to install them in some |
| subdirectory; so far these approaches have not been implemented. |
| |
| |
| File: configure.info, Node: Index, Prev: FAQ, Up: Top |
| |
| Index |
| ***** |
| |
| [index] |
| * Menu: |
| |
| * --build option: Build and Host Options. |
| (line 9) |
| * --host option: Build and Host Options. |
| (line 14) |
| * --target option: Specifying the Target. |
| (line 10) |
| * _GNU_SOURCE: Write configure.in. (line 134) |
| * AC_CANONICAL_HOST: Using the Host Type. (line 10) |
| * AC_CANONICAL_SYSTEM: Using the Target Type. |
| (line 6) |
| * AC_CONFIG_HEADER: Write configure.in. (line 66) |
| * AC_EXEEXT: Write configure.in. (line 86) |
| * AC_INIT: Write configure.in. (line 38) |
| * AC_OUTPUT: Write configure.in. (line 142) |
| * AC_PREREQ: Write configure.in. (line 42) |
| * AC_PROG_CC: Write configure.in. (line 103) |
| * AC_PROG_CXX: Write configure.in. (line 117) |
| * acconfig.h: Written Developer Files. |
| (line 27) |
| * acconfig.h, writing: Write acconfig.h. (line 6) |
| * acinclude.m4: Written Developer Files. |
| (line 37) |
| * aclocal.m4: Generated Developer Files. |
| (line 33) |
| * AM_CONFIG_HEADER: Write configure.in. (line 53) |
| * AM_DISABLE_SHARED: Write configure.in. (line 127) |
| * AM_EXEEXT: Write configure.in. (line 86) |
| * AM_INIT_AUTOMAKE: Write configure.in. (line 48) |
| * AM_MAINTAINER_MODE: Write configure.in. (line 70) |
| * AM_PROG_LIBTOOL: Write configure.in. (line 122) |
| * AM_PROG_LIBTOOL in configure: FAQ. (line 19) |
| * build option: Build and Host Options. |
| (line 9) |
| * building with a cross compiler: Canadian Cross. (line 6) |
| * canadian cross: Canadian Cross. (line 6) |
| * canadian cross in configure: CCross in Configure. (line 6) |
| * canadian cross in cygnus tree: CCross in Cygnus Tree. |
| (line 6) |
| * canadian cross in makefile: CCross in Make. (line 6) |
| * canadian cross, configuring: Build and Host Options. |
| (line 6) |
| * canonical system names: Configuration Names. (line 6) |
| * config.cache: Build Files Description. |
| (line 28) |
| * config.h: Build Files Description. |
| (line 23) |
| * config.h.in: Generated Developer Files. |
| (line 45) |
| * config.in: Generated Developer Files. |
| (line 45) |
| * config.status: Build Files Description. |
| (line 9) |
| * config.status --recheck: FAQ. (line 40) |
| * configuration names: Configuration Names. (line 6) |
| * configuration triplets: Configuration Names. (line 6) |
| * configure: Generated Developer Files. |
| (line 21) |
| * configure build system: Build and Host Options. |
| (line 9) |
| * configure host: Build and Host Options. |
| (line 14) |
| * configure target: Specifying the Target. |
| (line 10) |
| * configure.in: Written Developer Files. |
| (line 9) |
| * configure.in, writing: Write configure.in. (line 6) |
| * configuring a canadian cross: Build and Host Options. |
| (line 6) |
| * cross compiler: Cross Compilation Concepts. |
| (line 6) |
| * cross compiler, building with: Canadian Cross. (line 6) |
| * cross tools: Cross Compilation Tools. |
| (line 6) |
| * CY_GNU_GETTEXT in configure: FAQ. (line 19) |
| * cygnus configure: Cygnus Configure. (line 6) |
| * goals: Goals. (line 6) |
| * history: History. (line 6) |
| * host names: Configuration Names. (line 6) |
| * host option: Build and Host Options. |
| (line 14) |
| * host system: Host and Target. (line 6) |
| * host triplets: Configuration Names. (line 6) |
| * HOST_CC: CCross in Make. (line 27) |
| * libg++ configure: Cygnus Configure in C++ Libraries. |
| (line 6) |
| * libio configure: Cygnus Configure in C++ Libraries. |
| (line 6) |
| * libstdc++ configure: Cygnus Configure in C++ Libraries. |
| (line 6) |
| * Makefile: Build Files Description. |
| (line 18) |
| * Makefile, garbage characters: FAQ. (line 29) |
| * Makefile.am: Written Developer Files. |
| (line 18) |
| * Makefile.am, writing: Write Makefile.am. (line 6) |
| * Makefile.in: Generated Developer Files. |
| (line 26) |
| * multilibs: Multilibs. (line 6) |
| * stamp-h: Build Files Description. |
| (line 41) |
| * stamp-h.in: Generated Developer Files. |
| (line 54) |
| * system names: Configuration Names. (line 6) |
| * system types: Configuration Names. (line 6) |
| * target option: Specifying the Target. |
| (line 10) |
| * target system: Host and Target. (line 6) |
| * triplets: Configuration Names. (line 6) |
| * undefined macros: FAQ. (line 12) |
| |
| |
| |
| Tag Table: |
| Node: Top978 |
| Node: Introduction1506 |
| Node: Goals2588 |
| Node: Tools3312 |
| Node: History4306 |
| Node: Building7304 |
| Node: Getting Started10567 |
| Node: Write configure.in11080 |
| Node: Write Makefile.am18331 |
| Node: Write acconfig.h21508 |
| Node: Generate files23045 |
| Node: Getting Started Example25011 |
| Node: Getting Started Example 125766 |
| Node: Getting Started Example 227687 |
| Node: Getting Started Example 330682 |
| Node: Generate Files in Example33046 |
| Node: Files34136 |
| Node: Developer Files34747 |
| Node: Developer Files Picture35127 |
| Node: Written Developer Files36415 |
| Node: Generated Developer Files38967 |
| Node: Build Files42111 |
| Node: Build Files Picture42772 |
| Node: Build Files Description43536 |
| Node: Support Files45542 |
| Node: Configuration Names48424 |
| Node: Configuration Name Definition48924 |
| Node: Using Configuration Names51247 |
| Node: Cross Compilation Tools53217 |
| Node: Cross Compilation Concepts53908 |
| Node: Host and Target54876 |
| Node: Using the Host Type56377 |
| Node: Specifying the Target57726 |
| Node: Using the Target Type58515 |
| Node: Cross Tools in the Cygnus Tree61946 |
| Node: Host and Target Libraries63003 |
| Node: Target Library Configure Scripts66752 |
| Node: Make Targets in Cygnus Tree69844 |
| Node: Target libiberty71192 |
| Node: Canadian Cross72579 |
| Node: Canadian Cross Example73420 |
| Node: Canadian Cross Concepts74539 |
| Node: Build Cross Host Tools76051 |
| Node: Build and Host Options77003 |
| Node: CCross not in Cygnus Tree78789 |
| Node: CCross in Cygnus Tree79767 |
| Node: Standard Cygnus CCross80188 |
| Node: Cross Cygnus CCross81552 |
| Node: Supporting Canadian Cross84352 |
| Node: CCross in Configure84967 |
| Node: CCross in Make88135 |
| Node: Cygnus Configure89738 |
| Node: Cygnus Configure Basics90573 |
| Node: Cygnus Configure in C++ Libraries95251 |
| Node: Multilibs96258 |
| Node: Multilibs in gcc97303 |
| Node: Multilibs in Target Libraries98381 |
| Node: FAQ102572 |
| Node: Index106672 |
| |
| End Tag Table |