| 0.4.1 (2018-10-29) |
| ------------------ |
| |
| * Updated build requirements: |
| - libsigrokcxx >= 0.5.1 (libsigrok C++ bindings) |
| - libsigrokdecode >= 0.5.2 |
| - libboost-stacktrace (optional, only needed for debugging) |
| - asciidoctor (optional, only needed to build the HTML manual) |
| - asciidoctor-pdf (optional, only needed to build the PDF manual) |
| * Add support for snapping cursors and markers to signal edges (bug #684). |
| - When the mouse cursor is in a channel, snapping will only be performed |
| for edges of that specific channel. |
| - When the mouse cursor is not in a channel, snapping will happen for any |
| edge of any channel (bugs #1292, #1294). |
| - When moving both cursors at the same time, the left one will snap to |
| edges while the right one will not (e.g. useful for measurements). |
| - The edge to snap to is chosen based on heuristics involving the edge |
| density near the mouse cursor (to try to get the most useful matches). |
| * Command-line options: |
| - Add support for loading multiple files from the command-line (bug #1040). |
| - Add support for input format options for the -I parameter (bug #951). |
| Example: pulseview -I csv:header:first-channel=2 -i filename.csv |
| - Try to autodetect the input format when -I is not supplied (bug #1015). |
| - Add support for -d/--driver, i.e. driver scan options (bug #953). |
| Example: pulseview -d ols:conn=/dev/ttyACM0 |
| - Add a -D/--dont-scan option, don't auto-scan for devices (bug #1116). |
| - The -V option now shows the full PulseView/libs version info (bug #1213). |
| * Add support for per-channel analog-to-logic conversion (A2L) via either |
| the "threshold" or "schmitt-trigger" method, which allows running protocol |
| decoders on the converted channels. |
| * Cursors: |
| - Add a tooltip when there's not enough space to show the |
| interval/frequency measurement values (bug #1222). |
| - Measurements are always shown with 12 digit precision (bug #870). |
| * Add theme (and Qt UI style) support, including two "dark" themes. |
| * Add a PulseView manual (HTML and PDF format), generated by "make manual". |
| * manpage: Document all new command-line options. |
| * Add a "fill logic signal high areas" feature with configurable color. |
| * Add segment/frame support and a selector UI for e.g. oscilloscope frames. |
| * Add multi-segment protocol decoding support. |
| * Add support for an (optional) vertical mouse hover line (bug #770). |
| * The obsolete signal scale handle has been replaced by another mechanism. |
| * Accept user-entered sample rates when external clock is enabled. |
| * Slightly more user-friendly scan dropdown for VXI vs. Raw TCP (bug #1146). |
| * Suppport for new libsigrok(cxx) config keys: |
| - SR_CONF_DATA_SOURCE |
| - SR_CONF_EXTERNAL_CLOCK_SOURCE |
| - SR_CONF_AVERAGING |
| - SR_CONF_AVG_SAMPLES (including support for list of values) |
| * Fix long UI hangs when changing decoder options/channels (bug #1174). |
| * Many internal refactorings and flexibility/performance improvements. |
| - Decrease the number of trace redrawing operations in a few places. |
| - Use emplace_back() in various places to avoid some allocations. |
| - Increase decode chunk size to 256kB for better performance. |
| - Increase input file chunk size to 4MB for improved performance. |
| - Speed up painting by not unnecessarily copying decoder annotations. |
| - Improve MipMap downsampling code, speeding up e.g. file loading. |
| - Fix various memory leaks and other issues reported by valgrind. |
| - Various fixes for issues reported by clang-tidy and clazy. |
| - Fix some issues reported by Coverity. |
| - Fix various gcc 8 warnings/errors. |
| * Decoder channel name (auto-)assignment: |
| - Auto-match e.g. "SCL analog" to the "SCL" decoder channel. |
| - Ignore "insignificant" characters (-_.) for name matching (bug #1270). |
| - Fix a channel auto-assignment issue with disabled channels (bug #1182). |
| - Fix a channel auto-assignment issue with multiple matches (bug #1201). |
| - Fix an issue where channel names weren't updated correctly (bug #1089). |
| - Fix multiple decoder channel assignment issues (bug #1024). |
| - Fix an issue where channel auto-assignment was incorrectly applied. |
| * Fix an issue where decoder warnings weren't always shown (bug #982). |
| * Fix an issue with incorrect samplerates during multiple decoder runs. |
| * Fix a decoder restarting issue after reloading an input file. |
| * Fix an issue where existing decoder traces were not shown in new views. |
| * Fix an issue where stacked decoders weren't restored (bug #832). |
| * Fix an issue where decoder channel mappings were not restored (bug #831). |
| * Fix an issue where decoder options were not restored (bug #831). |
| * Fix an issue where not all decoder stacks were restored (bug #888). |
| * Fix an issue where header area tooltips were incorrectly shown. |
| * Fix trace resizing when new annotation classes appear. |
| * Fix an issue with ruler updating after restoring a session. |
| * Fix an issue with header resizing events. |
| * Fix an issue where decoders would not restart upon A2L conversion changes. |
| * Fix an issue with bit IDs which caused incorrect decode runs. |
| * Avoid a crash by ignoring invalid loglevel (-l option) specs (bug #1071). |
| * Fix an issue where settings callbacks could not be unregistered. |
| * Ruler tick legends now don't partly disappear when scrolled off the ends. |
| * Fix file extension filter in "Import File" dialog (bug #1039). |
| * Fix a crash when trying to save invalid trace ranges (bug #1038). |
| * Fix a crash related to A2L conversion changes (bug #1132). |
| * Fix a crash when config_list() was returning errors (bug #928). |
| * Fix a crash when config_get() was returning errors (bug #1035). |
| * Fix a crash when read_config() calls were failing. |
| * Fix a crash caused by incorrectly sized sample buffers (bug #1166). |
| * Fix an issue where decoder option changes affected other options (bug #1162). |
| * Resize trace when hiding/deleting a stacked PD. |
| * Only pass non-zero samplerate metadata to protocol decoders (bug #1118). |
| * Fix an issue when processing packets without sample data. |
| * Fix inconsistent decoder annotation colors upon multiple runs (bug #709). |
| * Fix two minor UI issues with the decoding "progress bar" display. |
| * Fix some voltage threshold UI widget and default value issues (bug #1149). |
| * Fix an issue when loading settings saved via older Boost lib (bug #1203). |
| * Avoid qDebug().noquote() for now, would require more recent Qt (bug #1169). |
| * Fix an issue where the last analog sample was not being shown (bug #956). |
| * Fix an issue where markers were not removed upon new sessions (bug #540). |
| * Fix an issue where the "show cursors" button wasn't working (bug #1212). |
| * Fix a crash by forbidding UI trigger changes during acquisitions (bug #807). |
| * Fix an issue where trigger markers would disappear (bug #1226). |
| * Fix a crash when running out of memory during acquisitions (bug #975). |
| * Fix an issue where multiple decoder traces would overlap (bug #1204). |
| * Fix an issue with silent failures during file loading (bug #1259). |
| * Avoid incorrectly hardcoded ConfigKey::SAMPLERATE (bug #651). |
| * Prevent some crashes when scanning for devices. |
| * Show a slightly more specific error for "Failed to select device". |
| * Remove the "1:1 zoom button" (bug #1198). |
| * Cache device triggers instead of querying multiple times (bug #979). |
| * Add new context menus (right-click in the trace area or header): |
| - Add annotation exporting support from a decoder's context menu: |
| All, only a specified row, all from mouse position, all between cursors. |
| - Add a facility to pause/resume decoding via a decoder's context menu. |
| - Add a "Create marker here" context menu item. |
| - Add "Set as zero point" context menu item. |
| - Header: Add an "Enable/disable mouse hover marker" context menu item. |
| * Settings: |
| - Enable the "show sampling points" setting by default. |
| - Enable the mouse hover marker by default. |
| - Add a "zoom-to-fit when acquisition stops" setting (bug #236). |
| - Add a "default div height" setting. |
| - Add a "logic trace height" setting. |
| - Add a "Show conversion thresholds in analog traces" setting. |
| - Add a "Show time zero at the trigger" setting. |
| - Show firmware and decoder search paths in the settings dialog (bug #1128). |
| - Show logs from libsigrok, libsigrokdecode, and PulseView itself. |
| - Change page list design, also fixes UI inconsistencies (bug #1095). |
| - Only show drivers PulseView will actually use (bug #1153). |
| - Make the version info in the dialog selectable for copy-paste (bug #1264). |
| - Add annotation export formatting setting. |
| - Add a setting for the snap-to-edge distance (in pixels). |
| * HACKING: Prefer git pull requests over mailing list patches. |
| * UI: Use slider instead of combo box for contiguous ranges. |
| * Reset and re-use existing decoder sessions (no full reconstruction). |
| * Trace view: Make the zero line for analog traces thicker. |
| * PulseView .desktop file: Fix a "desktop-file-validate" error. |
| * Add experimental (default-off) boost::stacktrace support. |
| * Add more options to show/hide certain channels (bug #1023): |
| - Enable: All / Logic / Analog / Unnamed / Non-chaning |
| - Disable: All / Logic / Analog / Named / Changing |
| * Build system: |
| - Set CMake policy CMP0071 to NEW (bug #1143). |
| - Set CMake policy CMP0054 to NEW, fixes a warning. |
| - Show a helpful message when libsigrokcxx is not found (bug #1199). |
| - Fix a build issue with ENABLE_DECODE=n. |
| * Windows: |
| - Have debug builds (-DCMAKE_BUILD_TYPE=Debug) show/open a "DOS box". |
| - Fix a MinGW compile error due to a missing #include. |
| - Fix a Windows XP crash caused by a missing cast (bug #1125). |
| - Fix a Windows XP crash caused by incorrect segment handling (bug #1139). |
| - CMakeLists.txt: Only add Qt5PlatformSupport for Qt < 5.8.0. |
| - Fix a build issue on MSYS2 by applying an MXE workaround only on MXE. |
| - Installer: Add debug shortcut (Windows start menu) for -l 5. |
| - Installer: Add links to the HTML/PDF manual. |
| * Mac OS X: |
| - Fix a crash with large acquisitions on Mac OS X (bug #1284). |
| - Work around a QColor serialization bug on Mac OS X. |
| |
| 0.4.0 (2017-06-12) |
| ------------------ |
| |
| * Updated build requirements: |
| - A C++ compiler with full C++11 support (g++ >= 4.8.1 or clang++ >= 3.3) |
| - cmake >= 2.8.12 |
| - libglib >= 2.28.0 |
| - glibmm-2.4 >= 2.28.0 |
| - Boost >= 1.55: |
| - New requirement: libboost-serialization. |
| - Dropped requirement: libboost-thread. |
| - libsigrokcxx >= 0.5.0 (libsigrok C++ bindings) |
| - libsigrokdecode >= 0.5.0 |
| - Dropped support for Qt4; PulseView now requires Qt5. |
| * Add the concepts of sessions and views to PulseView: |
| - Sessions represent individual files/device instances. |
| Each session is represented as a tab in PulseView. |
| - Views are different data representations of one specific session. |
| For example, different views of a session can have different zoom levels, |
| can be scrolled to different positions, etc. etc. |
| Each view is a dock window within the respective session's tab. |
| - The view docks can be repositioned, resized and extracted out into their |
| own individual windows. |
| - Sessions and views are partially saved and restored when PulseView |
| exits/starts. Not all information is restored yet, though (e.g. decoders). |
| - Add CTRL-q to close PulseView, CTRL-w to close a session tab (bug #899). |
| * Add support for saving analog data to .sr files. |
| * Analog signal traces: |
| - Add initial implementation of a vertical grid for analog traces. |
| - Add a dropdown for the vertical resolution setting. |
| - Show the vertical resolution info on the right-hand side of the trace. |
| - Make the number of vertical/horizontal divisions configurable. |
| - Add an option to enable autoranging for analog channels. |
| * Add a settings icon which allows access to various PulseView config options. |
| * Settings -> About: |
| - Show the used libraries, versions, and features (bug #912). |
| - Fix word-wrapping of the driver/decoder/module names (bug #111). |
| * The menu bar and "burger menu" have been removed in favor of the |
| global settings menu (plus various buttons/icons and their hotkeys). |
| * UI and usability tweaks: |
| - Try to keep annotation labels within the view if there's enough space. |
| - Annotation labels can now be pushed aside by the row title. |
| - Use natural sort order for decode trace's channel selector drop-down. |
| - Improve icon/theme handling: Don't try to use non-existing theme icons. |
| - Add a pane splitter for the trace names/arrows, allowing horizontal resize. |
| - Show a confirmation dialog when closing sessions with unsaved data. |
| - Add tooltips to various UI elements to increase usability. |
| - Show a progress dialog while scanning for devices. |
| * Connect dialog: |
| - Improve UI to make it easier to use and understand. |
| - Allow for TCP and VXI connections to supported devices (bug #769). |
| - Clarify button label to "Scan for devices using driver above". |
| * Add support for showing the sampling points in traces (bug #485). |
| * Add support for specifying the (assumed) initial pin states before the |
| first sample that is being decoded. This can be set to 0/low, 1/high, or |
| to "use the same value as in the first sample". |
| * Add support for lists of discrete values for probe factor config. |
| * Add the -c option to not restore previous sessions on startup (bug #862). |
| * Performance improvements: |
| - Improved decoding performance due to larger chunk size. |
| - Increase session saving chunk size for much better performance. |
| * Open to-be-imported files in binary mode (bug #733). |
| * Startup: If last-used device is not available, use other available ones. |
| * Various internal code fixes and improvements found by clang-tidy. |
| * Add a check for explicit linking against libatomic (bug #810). |
| * Import/export/load: Allow file names without dots ("*" vs. "*.*"). |
| * Improve support for high-DPI displays and scaling (bug #871). |
| * Improve internal data storage and data handling algorithms. |
| * Remove FSF postal address from boiler plate license text. |
| * Fix a clang build issue related to 'override' (bug #737). |
| * Fix some zoom-dependent annotation block drawing issues (bug #745). |
| * Fix locking issues when trying to run multiple decoders (bug #181). |
| * Fix an exception due to incorrect handling of SR_CONF_FILTER. |
| * Fix an issue with multiple device/session creation upon file imports. |
| * Fix a drawing issue with "use coloured backgrounds" and markers (bug #771). |
| * Fix various issues to better handle re-loading of input files. |
| * Fix a build issue in the PulseView test-suite (bug #808). |
| * Fix a Qt5 bug related to QMainWindow SVG icons via workaround (bug #814). |
| * Fix a Boost-related build issue with gcc 6.2.x (bug #863). |
| * Fix an issue that prevented decoders from being removed (bug #849). |
| * Fix an issue with incorrect sample rate limits (bug #890). |
| * Fix decoding issues due to re-feeding old data (bugs #876, #850). |
| * Fix temporarily non-working 'b' and 's' hotkeys (bugs #907, #908) |
| * Fix an issue with std::roundf() on Android (bug #945). |
| * Fix an issue with negative vertical divisions on channel 0 (bug #940). |
| * Fix an issue when zero vertical divisions were configured (bug #942). |
| * Fix an issue with the file save progressbar remaining open (bug #895). |
| * Fix incorrect values when importing raw analog data (bug #958). |
| * Fix an issue with non-smooth zoom on e.g. some trackpads. |
| * Fix an issue where the horizontal scrollbar couldn't be moved (bug #957). |
| * Fix an issue with the pane positioning when loading files (bug #969). |
| * Fix an issue where the Run button would remain green incorrectly (bug #970). |
| * Fix a crash when input modules were yielding errors (bug #775). |
| * Fix a crash with stacked decoders on Mac OS X. |
| * Fix a crash when no device was found or selected. |
| * Fix a crash with selected but unusable devices (bug #805). |
| * Fix a crash when closing PulseView with active triggers (bug #705). |
| * Fix a crash that occured with certain glibmm versions (bug #777). |
| * Fix a crash when an unusable device is encountered (bug #829). |
| * Fix a negative cursor position "Save Selected Range As" crash (bug #792). |
| * Fix various other unrelated crash conditions. |
| * Add an AppData/AppStream file for PulseView (bug #859). |
| - Install the file to ${CMAKE_INSTALL_DATAROOTDIR}/metainfo. |
| * .desktop file: |
| - Rename to org.sigrok.PulseView.desktop. |
| - Add MimeType=application/vnd.sigrok.session field (bug #858). |
| - Add additional Development category. |
| - Install the file to ${CMAKE_INSTALL_DATAROOTDIR}/applications. |
| * Rename sigrok-logo-notext.{png,svg,ico} icons to pulseview.{png,svg,ico}. |
| - Install the icons to ${CMAKE_INSTALL_DATAROOTDIR}/icons/... |
| * NSIS: |
| - Update to Python 3.4.x. We can't use any higher version for the time |
| being, since 3.4.x is the last version to support Windows XP. |
| - Place the example .sr files in a separate installer section. |
| - Limit example .sr files to a small set to shrink the installer size. |
| - Clarify Start menu links (e.g. "Uninstall") to avoid confusion. |
| - Allow registering the .sr extension with PulseView (bug #964). |
| * manpage: Various updates (e.g. hotkeys, command-line options). |
| * Fix various compiler warnings. |
| |
| 0.3.0 (2016-01-29) |
| ------------------ |
| |
| * PulseView now uses libsigrokcxx (the libsigrok C++ bindings library). |
| * Update to use the new APIs of libsigrokcxx 0.4.x and libsigrokdecode 0.4.x. |
| * Add support for vertical scaling of analog and logic traces. |
| * Add a "Save selection range as..." feature. This allows the user to select |
| a subset of the data (using the cursors) and save that into a file in the |
| libsigrok session format (*.sr). |
| * Remember the directory of the last file that was opened/saved. |
| * Automatically save and restore (upon PulseView shutdown/startup): |
| - the window state (size, position) |
| - the most recently used device |
| * Implement pinch-zoom support (useful e.g. on tablets). |
| * Implement an "always zoom-to-fit" feature. |
| * Implement a "sticky scrolling" feature, using hotkey 's' (bug #121). |
| * Show icons for active triggers on the right-hand side of the window. |
| * Cursors: Also show the frequency in addition to distance/time (bug #502). |
| * List available serial ports (for serial-based devices) in a drop-down. |
| * Add support for trace groups. An arbitrary number of traces can be grouped |
| together, which allows for dragging them around as a group and re-ordering |
| traces within the group. Hotkeys: group (CTRL+g), ungroup (CTRL+u). |
| * Use either alternating gray values as trace background color, or the |
| trace's own color (slightly modified). This behaviour is configurable |
| via the menu or the 'b' hotkey. |
| * Show a vertical marker at the trigger point (bug #685). |
| * Sampling bar: Show the total sampling time in a tooltip. |
| * Trace/Decoder popups: Close the popup when the ENTER/RETURN key is pressed. |
| * Improve horizontal arrow-key scrolling step size. |
| * The viewport can now be dragged vertically as well. |
| * Add support for placing arbitrary markers (double-click at the desired |
| position in the ruler area) with arbitrary name/content. Markers can be |
| removed via the delete key (or the right-click context menu). |
| * Show full device names in the device drop-down. |
| * The device selector combobox is now a split button. Clicking on a device |
| name will open the "Connect to Device" dialog which allows for manual |
| device selection. Clicking on the small arrow will open a drop-down with |
| all autodetected devices. |
| * The main menu is now hidden by default, pressing ALT will make it appear, |
| pressing ALT or ESC will hide it again. |
| * Add an Export menu item, which can export the data in various formats. |
| * Add an Import menu item, which allows data import of various formats. |
| * Support specifying input files + formats on the command-line (-i and -I). |
| * Update the possible samplerates/samplecounts widgets when needed. |
| * Various UI fixes and improvements (colors, font sizes, clipping, etc). |
| * Add support for the SR_CONF_{POWER_OFF,PROBE_FACTOR} config keys. |
| * Include the device / filename in the window title (bug #244). |
| * Keyboard shortcuts: |
| - Add space as a shortcut to start/stop an acquisition. |
| - Add shortcuts for the open/save menu items (CTRL-o, CTRL-s). |
| - Add trace group shortcuts: group (CTRL+g), ungroup (CTRL+u). |
| - Add 's' as shortcut for enabling/disabling sticky scrolling. |
| - Add 'b' as shortcut for colored / alternating-gray trace backgrounds. |
| * Add a few missing toolbar buttons. |
| * Provide tooltips for decoder annotations (which show the "full" annotation |
| text regardless of zoom-level). |
| * Improvements to work (better) with Qt5 (Qt4 remains supported as well). |
| * The whole code-base has been converted to C++11 (dropping the use |
| of various Boost functionality in favor of std:: equivalents). |
| * Build system: |
| - Always build with -std=c++11. |
| - Auto-detect Qt4 or Qt5. If both are available, Qt5 will be selected |
| unless the cmake option FORCE_QT4 is set to TRUE. |
| - Don't use Qt-defined keywords (can cause issues with other headers). |
| - Fix an issue with QtSvg linking (bug #369). |
| - Fix a build issue related to Qt4 MOC. |
| - Add "-git-<hash>" suffix to development version numbers (bug #609). |
| - Fix the build for older glibmm versions (bug #548). |
| * Updated build requirements: |
| - A C++ compiler with C++11 support (g++ >= 4.7 or clang++ >= 3.1) |
| - glibmm-2.4 (>= 2.28.0) |
| - Qt4 >= 4.5 or Qt5 (including the following components): |
| - Qt4: QtCore, QtGui, QtSvg |
| - Qt5: Qt5Core, Qt5Gui, Qt5Widgets, Qt5Svg |
| - Boost >= 1.53 (bugs #722, #593). |
| - libsigrokcxx >= 0.4.0 (libsigrok C++ bindings) |
| - libsigrokdecode >= 0.4.0 |
| - libsigrokandroidutils >= 0.1.0 (optional, only needed on Android) |
| * Dropped build requirements: |
| - libsigrok (PulseView now uses libsigrokcxx instead). |
| * manpage: |
| - Various fixes and updates. |
| - Document all keyboard shortcuts. |
| * Android: |
| - Add basic Android support and support for building a PulseView APK. |
| - Install logging callbacks for Android. |
| - Fix a rendering issue by disabling the system background. |
| - Fix an issue due to a missing libintl.so in the APK (bug #575). |
| - Add asset reader functionality, e.g. for firmware files. |
| - Include firmware files (from sigrok-firmware) in the APK (bug #400). |
| * Windows: |
| - Fix an issue related to CMAKE_MODULE_PATH usage. |
| - Fix multiple Boost- and thread-related issues. |
| - Fix a build issue due to windows.h namespace pollution (bug #517). |
| - Fix an issue when saving .sr files (bug #615). |
| * Mac OS X: |
| - Fix an issue related to Glib::Variant types. |
| - Fix a build failure on Mac OS X 10.10 (bug #621). |
| * NSIS: |
| - Drop libusb0.dll, we use libusb-1.0 everywhere now. |
| - Add start menu entries for Zadig (bug #542). |
| - Support out-of-tree builds. |
| - Don't hardcode the MXE install location. |
| * README: Drop reference to obsolete sigrok-commits mailing list. |
| * Add a Doxygen file for auto-generated code documentation. |
| * Populate signal popup combo box with signal names (not probe names). |
| * Fix various thread related issues. |
| * Fix various compiler warnings and compiler portability issues. |
| * Adapt PulseView to use the new libsigrokcxx trigger API (bugs #448, #452). |
| * Reimplement file save using the "srzip" output module (bug #451). |
| * Check whether config keys are available before use (bug #487). |
| * Markers: Fix display of negative values in popups (bug #460). |
| * Properly handle device selection failure (bug #455). |
| * Fix a progressbar issue when saving files (bug #451). |
| * Fix incorrect channel names in .sr files (bug #490). |
| * Save and load signal names as UTF-8 strings (bug #498). |
| * Add a workaround for QTBUG-22829 (bug #532). |
| * Allow vertical scrolling via CTRL + mouse-wheel (bug #497). |
| * Fix an isnan() related compiler error (bug #531). |
| * Gracefully handle the case of a failing SAMPLERATE query (bug #529). |
| * Show less device info in the device dropdown (bug #285). |
| * Always show full device info in device selection tooltips (bug #489). |
| * Fix a segfault due to a missing Capability::LIST check (bug #453). |
| * Allow PulseView to be killed via CTRL-C from a terminal (bug #368). |
| * Support having no selected device (bug #488, #392). |
| * Add menu actions to the main window too (bug #590). |
| * Avoid confusing autocompletion in the channel name popups (bug #501). |
| * Fix an issue with channel ordering being reset incorrectly (bug #536). |
| * Fix an issue related to a disappearing samplerate dropdown (bug #594). |
| * Fix an issue with incorrect samplenumbers when running decoders. |
| * Suppress warnings from glibmm about deprecated auto_ptr (bug #654). |
| * Add a workaround for a corrupted timescale issue (bug #627). |
| * Fix a libzip-related issue resulting in errors writing .sr files (bug #570). |
| * Fix an issue that caused incorrect .sr files being saved (bug #599). |
| * When clicking a channel name, place the cursor in the text field (bug #298). |
| * Fix a double-free issue/segfault when trying to open an .sr file (bug #405). |
| * Fix an issue with incorrect placement of PD annotation tooltips (bug #477). |
| * Allow drag-moving both cursors (left + right) at the same time (bug #514). |
| * Improve the step-size of the vertical scroll bar click-movement (bug #513). |
| * Fix a too small display area for devices with many channels (bug #515). |
| * Fix a Qt5 QWellArray related static linking issue (bug #525). |
| * Fix broken session saving for devices with more than one channel (bug #404). |
| * Fix incorrect ruler units of kilo-/mega-/giga-seconds (bug #371). |
| * Fix an issue with segment sizes wasting huge amounts of memory (bug #622). |
| * Avoid a crash when running out of memory, show an error instead (bug #626). |
| * Improve behaviour when the last PD is removed from the stack (bug #510). |
| * Disable device options GUI elements after an acquisition start (bug #597). |
| * Fix an issue with the samplerate input format option (bug #595). |
| * Fix a segfault when switching from a file to a device and back (bug #596). |
| * Fix a segfault when loading very large .sr files (bug #592). |
| * Fix a segfault when selecting a device twice (bug #605). |
| * Fix an incorrect decode trace background color (bug #718). |
| * Fix incorrect annotation row background color behaviour (bug #719). |
| * Fix an issue with lingering decoder traces (bug #687). |
| * Fix non-intuitive channel name editing behaviour (bug #717). |
| * Speed up annotation drawing by quite a bit (bug #325). |
| |
| 0.2.0 (2014-05-06) |
| ------------------ |
| |
| * Add support for protocol decoding. |
| - A menu item Decoders->Add can add (only) low-level protocol decoders. |
| - Clicking on a decoder's arrow on the left-hand side allows stacking |
| (only) further, higher-level decoders (bug #333). |
| - Add support for multiple decoder rows per PD (bugs #161, #303). |
| * Add support for loading data from input files. |
| * Add support for saving logic analyzer data in *.sr files (bug #245). |
| * Show the filename of loaded *.sr files as "device name" in a drop-down. |
| * Add support for the new "channel groups" feature in libsigrok. |
| * Add a "Zoom to fit" and a "Zoom 1:1" icon/button. |
| * Add a "Channels" icon/button for enabling and configuring device channels. |
| * Add a "Device options" icon/button for configuring device specific settings |
| such as voltage thresholds. |
| * Double-clicking will zoom into the location the cursor points to. |
| * Add shortcut keys for Zoom-in (CTRL++) and Zoom-out (Ctrl+-) (bug #235). |
| * Add initial, basic support for analog data sources, such as oscilloscopes. |
| This has been tested on e.g. the Rigol DS1052E oscilloscope (bug #127). |
| * Almost all operations in PulseView work in an "auto-apply" style, i.e. |
| any changes in the GUI popups (decoder channel assignment, decoder option |
| changes, device channel changes, device option changes, and so on) have an |
| immediate effect (you don't have to click on any "OK" buttons). |
| * Open file dialog: Add 'All files' selection possibility. |
| * Added GUI support for the following libsigrok config options: |
| - SR_CONF_VOLTAGE_THRESHOLD |
| - SR_CONF_TRIGGER_SLOPE |
| - SR_CONF_EXTERNAL_CLOCK |
| - SR_CONF_CLOCK_EDGE |
| * Updated build requirements: |
| - cmake >= 2.8.6 (required) |
| - libsigrok >= 0.3.0 (required) |
| - libsigrokdecode >= 0.3.0 (required) |
| Note: libsigrokdecode is now always required (was optional before). |
| - libboost-filesystem >= 1.42 (required) |
| - libboost-test >= 1.42 (optional, only needed for running unit tests) |
| * Fix a build issue on NetBSD due to an incorrect #include. |
| * Fix a channel handling issue for devices with >= 16 channels. |
| * Fixed a few display issues related to UTF-8 strings in decoder annotations, |
| decoder options, and so on (bug #307, and other fixes without bug numbers). |
| * Don't decode if required PD channels were not supplied (bug #204). |
| * Fix some issues with partially disappearing PD annotations. |
| * Update the samplerate selector when the device config changes (since e.g. |
| en-/disabling logic analyzer channels can change available samplerates). |
| * Fix a samplerate selector and device config update issue (bug #296). |
| * Minor performance improvements via memory pre-allocation in some areas. |
| * Remove old PD annotations upon new captures (bugs #172, #302). |
| * Portability improvements by using portable sample pack/unpack code. |
| * Fix a segfault related to thread joining (bug #323). |
| * Fix a minor issue which lead to trigger config being unusable (bug #318). |
| * Fix an issue which lead to the user-selected samplerate in the drop-down |
| box not being selected and shown again after clicking "Run" (bug #324). |
| * Start a new decode session whenever a new frame begins. |
| * Fix an issue which arose when a session file load failed (bug #331). |
| * Fix a segfault if only exactly one libsigrok driver is available (bug #334). |
| * Fix an issue with channel names not being updated while typing (bug #338). |
| * Fix an issue by stopping the capture when a device is changed (bug #223). |
| * Fix an issue with the displayed cursor popup time (bug #229). |
| * Fix handling of different integer types in some properties (bug #203). |
| * Hide the 'Configure device' button when the popup would be empty (bug #232). |
| * Fix a decoding chunk buffer / unitsize issue (bugs #171, #225). |
| * Fix a zoom issue due to invalid samplerate, assume 1Hz if needed (bug #278). |
| * Fix a QWellArray related issue by dropping QT_NO_MENU code (bug #265). |
| * Fix an analog data channel interleaving issue (bug #279). |
| * Only show the sample count widget if needed (i.e., hide it for scopes). |
| * SweepTimingWidget: Show a 1-2-5 based list for samplerate and samplecount. |
| * Fixed a unit test issue with AnalogSnapshotTest (bug #286). |
| * Add an extra sample to edges to make the end sample visible (bug #280). |
| * Fix an issue with decoder errors being shown even after the error was fixed. |
| * Add support for SR_CONF_LIMIT_SAMPLES (device-specific limits) (bug #74). |
| * Windows: |
| - Use the sigrok logo as icon for pulseview.exe (bugs #110, #238). |
| - Fix SVG icons not being displayed on Windows (bug #239). |
| - Ship libusb0.dll in the NSIS based installer (bug #241). |
| - Additionally ship decoders, firmware files, example *.sr files, and |
| zadig.exe and zadig_xp.exe in the NSIS based installer. |
| - Fix a "working path" issue resulting in PDs not being usable. |
| * Device scan: Disable "OK" button if no devices were found (bug #237). |
| * Fix a segfault related to incorrect decoder option handling (bug #160). |
| * Fix an off-by-one issue resulting in one PD not being usable (bug #164). |
| * Fix a PD channel auto-select logic issue with optional channels (bug #310). |
| * Fix an issue when cancelling "Connect to Device" (bug #242). |
| * Avoid confusing annotation color changes (bug #311). |
| * Fix an issue that caused some decoded data to not be shown (bug #308). |
| * Don't allow disabled channels (channel arrows) to be selected (bug #313). |
| * The channel name field is now resized to always fit the contents (bug #167). |
| * Build fixes for systems with (among other versions) Qt5 installed. |
| * Fix a build issue related to missing libboost-filesystem (bug #133). |
| * Add Cotire (optional, disabled by default) support for build performance. |
| * Fix a build issue related to Cotire (bug #217). |
| * Fix an issue with missing channel names from loaded files (bug #126). |
| * Fix missing samplerate loading from session files (bug #123). |
| * Fix some build issues related to C++ namespaces (bug #196). |
| * Fix a file loading issue which triggered an assert (bug #320). |
| |
| 0.1.0 (2013-05-04) |
| ------------------ |
| |
| * Initial release. |
| |