chromium / native_client / nacl-gcc / f80d6b9ee7f94755c697ffb7194fb01dd0c537dd / . / gcc / params.def

/* params.def - Run-time parameters. | |

Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 | |

Free Software Foundation, Inc. | |

Written by Mark Mitchell <mark@codesourcery.com>. | |

This file is part of GCC. | |

GCC is free software; you can redistribute it and/or modify it under | |

the terms of the GNU General Public License as published by the Free | |

Software Foundation; either version 3, or (at your option) any later | |

version. | |

GCC is distributed in the hope that it will be useful, but WITHOUT ANY | |

WARRANTY; without even the implied warranty of MERCHANTABILITY or | |

FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |

for more details. | |

You should have received a copy of the GNU General Public License | |

along with GCC; see the file COPYING3. If not see | |

<http://www.gnu.org/licenses/>. */ | |

/* This file contains definitions for language-independent | |

parameters. The DEFPARAM macro takes 6 arguments: | |

- The enumeral corresponding to this parameter. | |

- The name that can be used to set this parameter using the | |

command-line option `--param <name>=<value>'. | |

- A help string explaining how the parameter is used. | |

- A default value for the parameter. | |

- The minimum acceptable value for the parameter. | |

- The maximum acceptable value for the parameter (if greater than | |

the minimum). | |

Be sure to add an entry to invoke.texi summarizing the parameter. */ | |

/* The maximum structure size at which the scalar replacement of | |

aggregates (SRA) pass will perform block copies. The default | |

value, 0, implies that GCC will select the most appropriate size | |

itself. */ | |

DEFPARAM (PARAM_SRA_MAX_STRUCTURE_SIZE, | |

"sra-max-structure-size", | |

"The maximum structure size (in bytes) for which GCC will " | |

"use by-element copies", | |

0, 0, 0) | |

/* The maximum number of structure fields which the SRA pass will | |

instantiate to avoid block copies. The default value, 0, implies | |

that GCC will select the appropriate value itself. */ | |

DEFPARAM (PARAM_SRA_MAX_STRUCTURE_COUNT, | |

"sra-max-structure-count", | |

"The maximum number of structure fields for which GCC will " | |

"use by-element copies", | |

0, 0, 0) | |

/* The ratio between instantiated fields and the complete structure | |

size. We say that if the ratio of the number of bytes in | |

instantiated fields to the number of bytes in the complete | |

structure exceeds this parameter, or if the number of instantiated | |

fields to the total number of fields exceeds this parameter, then | |

block copies are not used. The default is 75%. */ | |

DEFPARAM (PARAM_SRA_FIELD_STRUCTURE_RATIO, | |

"sra-field-structure-ratio", | |

"The threshold ratio between instantiated fields and the total structure size", | |

75, 0, 100) | |

/* The threshold ratio between current and hottest structure counts. | |

We say that if the ratio of the current structure count, | |

calculated by profiling, to the hottest structure count | |

in the program is less than this parameter, then structure | |

reorganization is not applied. The default is 10%. */ | |

DEFPARAM (PARAM_STRUCT_REORG_COLD_STRUCT_RATIO, | |

"struct-reorg-cold-struct-ratio", | |

"The threshold ratio between current and hottest structure counts", | |

10, 0, 100) | |

/* When branch is predicted to be taken with probability lower than this | |

threshold (in percent), then it is considered well predictable. */ | |

DEFPARAM (PARAM_PREDICTABLE_BRANCH_OUTCOME, | |

"predictable-branch-outcome", | |

"Maximal esitmated outcome of branch considered predictable", | |

2, 0, 50) | |

/* The single function inlining limit. This is the maximum size | |

of a function counted in internal gcc instructions (not in | |

real machine instructions) that is eligible for inlining | |

by the tree inliner. | |

The default value is 450. | |

Only functions marked inline (or methods defined in the class | |

definition for C++) are affected by this. | |

There are more restrictions to inlining: If inlined functions | |

call other functions, the already inlined instructions are | |

counted and once the recursive inline limit (see | |

"max-inline-insns" parameter) is exceeded, the acceptable size | |

gets decreased. */ | |

DEFPARAM (PARAM_MAX_INLINE_INSNS_SINGLE, | |

"max-inline-insns-single", | |

"The maximum number of instructions in a single function eligible for inlining", | |

450, 0, 0) | |

/* The single function inlining limit for functions that are | |

inlined by virtue of -finline-functions (-O3). | |

This limit should be chosen to be below or equal to the limit | |

that is applied to functions marked inlined (or defined in the | |

class declaration in C++) given by the "max-inline-insns-single" | |

parameter. | |

The default value is 90. */ | |

DEFPARAM (PARAM_MAX_INLINE_INSNS_AUTO, | |

"max-inline-insns-auto", | |

"The maximum number of instructions when automatically inlining", | |

90, 0, 0) | |

DEFPARAM (PARAM_MAX_INLINE_INSNS_RECURSIVE, | |

"max-inline-insns-recursive", | |

"The maximum number of instructions inline function can grow to via recursive inlining", | |

450, 0, 0) | |

DEFPARAM (PARAM_MAX_INLINE_INSNS_RECURSIVE_AUTO, | |

"max-inline-insns-recursive-auto", | |

"The maximum number of instructions non-inline function can grow to via recursive inlining", | |

450, 0, 0) | |

DEFPARAM (PARAM_MAX_INLINE_RECURSIVE_DEPTH, | |

"max-inline-recursive-depth", | |

"The maximum depth of recursive inlining for inline functions", | |

8, 0, 0) | |

DEFPARAM (PARAM_MAX_INLINE_RECURSIVE_DEPTH_AUTO, | |

"max-inline-recursive-depth-auto", | |

"The maximum depth of recursive inlining for non-inline functions", | |

8, 0, 0) | |

DEFPARAM (PARAM_MIN_INLINE_RECURSIVE_PROBABILITY, | |

"min-inline-recursive-probability", | |

"Inline recursively only when the probability of call being executed exceeds the parameter", | |

10, 0, 0) | |

/* Limit the number of expansions created by the variable expansion | |

optimization to avoid register pressure. */ | |

DEFPARAM (PARAM_MAX_VARIABLE_EXPANSIONS, | |

"max-variable-expansions-in-unroller", | |

"If -fvariable-expansion-in-unroller is used, the maximum number of times that an individual variable will be expanded during loop unrolling", | |

1, 0, 0) | |

/* Limit loop autovectorization to loops with large enough iteration count. */ | |

DEFPARAM (PARAM_MIN_VECT_LOOP_BOUND, | |

"min-vect-loop-bound", | |

"If -ftree-vectorize is used, the minimal loop bound of a loop to be considered for vectorization", | |

1, 1, 0) | |

/* The maximum number of instructions to consider when looking for an | |

instruction to fill a delay slot. If more than this arbitrary | |

number of instructions is searched, the time savings from filling | |

the delay slot will be minimal so stop searching. Increasing | |

values mean more aggressive optimization, making the compile time | |

increase with probably small improvement in executable run time. */ | |

DEFPARAM (PARAM_MAX_DELAY_SLOT_INSN_SEARCH, | |

"max-delay-slot-insn-search", | |

"The maximum number of instructions to consider to fill a delay slot", | |

100, 0, 0) | |

/* When trying to fill delay slots, the maximum number of instructions | |

to consider when searching for a block with valid live register | |

information. Increasing this arbitrarily chosen value means more | |

aggressive optimization, increasing the compile time. This | |

parameter should be removed when the delay slot code is rewritten | |

to maintain the control-flow graph. */ | |

DEFPARAM(PARAM_MAX_DELAY_SLOT_LIVE_SEARCH, | |

"max-delay-slot-live-search", | |

"The maximum number of instructions to consider to find accurate live register information", | |

333, 0, 0) | |

/* This parameter limits the number of branch elements that the | |

scheduler will track anti-dependencies through without resetting | |

the tracking mechanism. Large functions with few calls or barriers | |

can generate lists containing many 1000's of dependencies. Generally | |

the compiler either uses all available memory, or runs for far too long. */ | |

DEFPARAM(PARAM_MAX_PENDING_LIST_LENGTH, | |

"max-pending-list-length", | |

"The maximum length of scheduling's pending operations list", | |

32, 0, 0) | |

DEFPARAM(PARAM_LARGE_FUNCTION_INSNS, | |

"large-function-insns", | |

"The size of function body to be considered large", | |

2700, 0, 0) | |

DEFPARAM(PARAM_LARGE_FUNCTION_GROWTH, | |

"large-function-growth", | |

"Maximal growth due to inlining of large function (in percent)", | |

100, 0, 0) | |

DEFPARAM(PARAM_LARGE_UNIT_INSNS, | |

"large-unit-insns", | |

"The size of translation unit to be considered large", | |

10000, 0, 0) | |

DEFPARAM(PARAM_INLINE_UNIT_GROWTH, | |

"inline-unit-growth", | |

"how much can given compilation unit grow because of the inlining (in percent)", | |

30, 0, 0) | |

DEFPARAM(PARAM_IPCP_UNIT_GROWTH, | |

"ipcp-unit-growth", | |

"how much can given compilation unit grow because of the interprocedural constant propagation (in percent)", | |

10, 0, 0) | |

DEFPARAM(PARAM_INLINE_CALL_COST, | |

"inline-call-cost", | |

"expense of call operation relative to ordinary arithmetic operations", | |

12, 0, 0) | |

DEFPARAM(PARAM_LARGE_STACK_FRAME, | |

"large-stack-frame", | |

"The size of stack frame to be considered large", | |

256, 0, 0) | |

DEFPARAM(PARAM_STACK_FRAME_GROWTH, | |

"large-stack-frame-growth", | |

"Maximal stack frame growth due to inlining (in percent)", | |

1000, 0, 0) | |

/* The GCSE optimization will be disabled if it would require | |

significantly more memory than this value. */ | |

DEFPARAM(PARAM_MAX_GCSE_MEMORY, | |

"max-gcse-memory", | |

"The maximum amount of memory to be allocated by GCSE", | |

50 * 1024 * 1024, 0, 0) | |

/* The number of repetitions of copy/const prop and PRE to run. */ | |

DEFPARAM(PARAM_MAX_GCSE_PASSES, | |

"max-gcse-passes", | |

"The maximum number of passes to make when doing GCSE", | |

1, 1, 0) | |

/* This is the threshold ratio when to perform partial redundancy | |

elimination after reload. We perform partial redundancy elimination | |

when the following holds: | |

(Redundant load execution count) | |

------------------------------- >= GCSE_AFTER_RELOAD_PARTIAL_FRACTION | |

(Added loads execution count) */ | |

DEFPARAM(PARAM_GCSE_AFTER_RELOAD_PARTIAL_FRACTION, | |

"gcse-after-reload-partial-fraction", | |

"The threshold ratio for performing partial redundancy elimination after reload", | |

3, 0, 0) | |

/* This is the threshold ratio of the critical edges execution count compared to | |

the redundant loads execution count that permits performing the load | |

redundancy elimination in gcse after reload. */ | |

DEFPARAM(PARAM_GCSE_AFTER_RELOAD_CRITICAL_FRACTION, | |

"gcse-after-reload-critical-fraction", | |

"The threshold ratio of critical edges execution count that permit performing redundancy elimination after reload", | |

10, 0, 0) | |

/* This parameter limits the number of insns in a loop that will be unrolled, | |

and by how much the loop is unrolled. | |

This limit should be at most half of the peeling limits: loop unroller | |

decides to not unroll loops that iterate fewer than 2*number of allowed | |

unrollings and thus we would have loops that are neither peeled or unrolled | |

otherwise. */ | |

DEFPARAM(PARAM_MAX_UNROLLED_INSNS, | |

"max-unrolled-insns", | |

"The maximum number of instructions to consider to unroll in a loop", | |

200, 0, 0) | |

/* This parameter limits how many times the loop is unrolled depending | |

on number of insns really executed in each iteration. */ | |

DEFPARAM(PARAM_MAX_AVERAGE_UNROLLED_INSNS, | |

"max-average-unrolled-insns", | |

"The maximum number of instructions to consider to unroll in a loop on average", | |

80, 0, 0) | |

/* The maximum number of unrollings of a single loop. */ | |

DEFPARAM(PARAM_MAX_UNROLL_TIMES, | |

"max-unroll-times", | |

"The maximum number of unrollings of a single loop", | |

8, 0, 0) | |

/* The maximum number of insns of a peeled loop. */ | |

DEFPARAM(PARAM_MAX_PEELED_INSNS, | |

"max-peeled-insns", | |

"The maximum number of insns of a peeled loop", | |

400, 0, 0) | |

/* The maximum number of peelings of a single loop. */ | |

DEFPARAM(PARAM_MAX_PEEL_TIMES, | |

"max-peel-times", | |

"The maximum number of peelings of a single loop", | |

16, 0, 0) | |

/* The maximum number of insns of a peeled loop. */ | |

DEFPARAM(PARAM_MAX_COMPLETELY_PEELED_INSNS, | |

"max-completely-peeled-insns", | |

"The maximum number of insns of a completely peeled loop", | |

400, 0, 0) | |

/* The maximum number of peelings of a single loop that is peeled completely. */ | |

DEFPARAM(PARAM_MAX_COMPLETELY_PEEL_TIMES, | |

"max-completely-peel-times", | |

"The maximum number of peelings of a single loop that is peeled completely", | |

16, 0, 0) | |

/* The maximum number of insns of a peeled loop that rolls only once. */ | |

DEFPARAM(PARAM_MAX_ONCE_PEELED_INSNS, | |

"max-once-peeled-insns", | |

"The maximum number of insns of a peeled loop that rolls only once", | |

400, 0, 0) | |

/* The maximum number of insns of an unswitched loop. */ | |

DEFPARAM(PARAM_MAX_UNSWITCH_INSNS, | |

"max-unswitch-insns", | |

"The maximum number of insns of an unswitched loop", | |

50, 0, 0) | |

/* The maximum level of recursion in unswitch_single_loop. */ | |

DEFPARAM(PARAM_MAX_UNSWITCH_LEVEL, | |

"max-unswitch-level", | |

"The maximum number of unswitchings in a single loop", | |

3, 0, 0) | |

/* The maximum number of iterations of a loop the brute force algorithm | |

for analysis of # of iterations of the loop tries to evaluate. */ | |

DEFPARAM(PARAM_MAX_ITERATIONS_TO_TRACK, | |

"max-iterations-to-track", | |

"Bound on the number of iterations the brute force # of iterations analysis algorithm evaluates", | |

1000, 0, 0) | |

/* A cutoff to avoid costly computations of the number of iterations in | |

the doloop transformation. */ | |

DEFPARAM(PARAM_MAX_ITERATIONS_COMPUTATION_COST, | |

"max-iterations-computation-cost", | |

"Bound on the cost of an expression to compute the number of iterations", | |

10, 0, 0) | |

/* This parameter is used to tune SMS MAX II calculations. */ | |

DEFPARAM(PARAM_SMS_MAX_II_FACTOR, | |

"sms-max-ii-factor", | |

"A factor for tuning the upper bound that swing modulo scheduler uses for scheduling a loop", | |

100, 0, 0) | |

DEFPARAM(PARAM_SMS_DFA_HISTORY, | |

"sms-dfa-history", | |

"The number of cycles the swing modulo scheduler considers when checking conflicts using DFA", | |

0, 0, 0) | |

DEFPARAM(PARAM_SMS_LOOP_AVERAGE_COUNT_THRESHOLD, | |

"sms-loop-average-count-threshold", | |

"A threshold on the average loop count considered by the swing modulo scheduler", | |

0, 0, 0) | |

DEFPARAM(HOT_BB_COUNT_FRACTION, | |

"hot-bb-count-fraction", | |

"Select fraction of the maximal count of repetitions of basic block in program given basic block needs to have to be considered hot", | |

10000, 0, 0) | |

DEFPARAM(HOT_BB_FREQUENCY_FRACTION, | |

"hot-bb-frequency-fraction", | |

"Select fraction of the maximal frequency of executions of basic block in function given basic block needs to have to be considered hot", | |

1000, 0, 0) | |

DEFPARAM (PARAM_ALIGN_THRESHOLD, | |

"align-threshold", | |

"Select fraction of the maximal frequency of executions of basic block in function given basic block get alignment", | |

100, 0, 0) | |

DEFPARAM (PARAM_ALIGN_LOOP_ITERATIONS, | |

"align-loop-iterations", | |

"Loops iterating at least selected number of iterations will get loop alignement.", | |

4, 0, 0) | |

/* For guessed profiles, the loops having unknown number of iterations | |

are predicted to iterate relatively few (10) times at average. | |

For functions containing one loop with large known number of iterations | |

and other loops having unbounded loops we would end up predicting all | |

the other loops cold that is not usually the case. So we need to artificially | |

flatten the profile. | |

We need to cut the maximal predicted iterations to large enough iterations | |

so the loop appears important, but safely within HOT_BB_COUNT_FRACTION | |

range. */ | |

DEFPARAM(PARAM_MAX_PREDICTED_ITERATIONS, | |

"max-predicted-iterations", | |

"The maximum number of loop iterations we predict statically", | |

100, 0, 0) | |

DEFPARAM(TRACER_DYNAMIC_COVERAGE_FEEDBACK, | |

"tracer-dynamic-coverage-feedback", | |

"The percentage of function, weighted by execution frequency, that must be covered by trace formation. Used when profile feedback is available", | |

95, 0, 100) | |

DEFPARAM(TRACER_DYNAMIC_COVERAGE, | |

"tracer-dynamic-coverage", | |

"The percentage of function, weighted by execution frequency, that must be covered by trace formation. Used when profile feedback is not available", | |

75, 0, 100) | |

DEFPARAM(TRACER_MAX_CODE_GROWTH, | |

"tracer-max-code-growth", | |

"Maximal code growth caused by tail duplication (in percent)", | |

100, 0, 0) | |

DEFPARAM(TRACER_MIN_BRANCH_RATIO, | |

"tracer-min-branch-ratio", | |

"Stop reverse growth if the reverse probability of best edge is less than this threshold (in percent)", | |

10, 0, 100) | |

DEFPARAM(TRACER_MIN_BRANCH_PROBABILITY_FEEDBACK, | |

"tracer-min-branch-probability-feedback", | |

"Stop forward growth if the probability of best edge is less than this threshold (in percent). Used when profile feedback is available", | |

80, 0, 100) | |

DEFPARAM(TRACER_MIN_BRANCH_PROBABILITY, | |

"tracer-min-branch-probability", | |

"Stop forward growth if the probability of best edge is less than this threshold (in percent). Used when profile feedback is not available", | |

50, 0, 100) | |

/* The maximum number of incoming edges to consider for crossjumping. */ | |

DEFPARAM(PARAM_MAX_CROSSJUMP_EDGES, | |

"max-crossjump-edges", | |

"The maximum number of incoming edges to consider for crossjumping", | |

100, 0, 0) | |

/* The minimum number of matching instructions to consider for crossjumping. */ | |

DEFPARAM(PARAM_MIN_CROSSJUMP_INSNS, | |

"min-crossjump-insns", | |

"The minimum number of matching instructions to consider for crossjumping", | |

5, 0, 0) | |

/* The maximum number expansion factor when copying basic blocks. */ | |

DEFPARAM(PARAM_MAX_GROW_COPY_BB_INSNS, | |

"max-grow-copy-bb-insns", | |

"The maximum expansion factor when copying basic blocks", | |

8, 0, 0) | |

/* The maximum number of insns to duplicate when unfactoring computed gotos. */ | |

DEFPARAM(PARAM_MAX_GOTO_DUPLICATION_INSNS, | |

"max-goto-duplication-insns", | |

"The maximum number of insns to duplicate when unfactoring computed gotos", | |

8, 0, 0) | |

/* The maximum length of path considered in cse. */ | |

DEFPARAM(PARAM_MAX_CSE_PATH_LENGTH, | |

"max-cse-path-length", | |

"The maximum length of path considered in cse", | |

10, 0, 0) | |

DEFPARAM(PARAM_MAX_CSE_INSNS, | |

"max-cse-insns", | |

"The maximum instructions CSE process before flushing", | |

1000, 0, 0) | |

/* The cost of expression in loop invariant motion that is considered | |

expensive. */ | |

DEFPARAM(PARAM_LIM_EXPENSIVE, | |

"lim-expensive", | |

"The minimum cost of an expensive expression in the loop invariant motion", | |

20, 0, 0) | |

/* Bound on number of candidates for induction variables below that | |

all candidates are considered for each use in induction variable | |

optimizations. */ | |

DEFPARAM(PARAM_IV_CONSIDER_ALL_CANDIDATES_BOUND, | |

"iv-consider-all-candidates-bound", | |

"Bound on number of candidates below that all candidates are considered in iv optimizations", | |

30, 0, 0) | |

/* The induction variable optimizations give up on loops that contain more | |

induction variable uses. */ | |

DEFPARAM(PARAM_IV_MAX_CONSIDERED_USES, | |

"iv-max-considered-uses", | |

"Bound on number of iv uses in loop optimized in iv optimizations", | |

250, 0, 0) | |

/* If there are at most this number of ivs in the set, try removing unnecessary | |

ivs from the set always. */ | |

DEFPARAM(PARAM_IV_ALWAYS_PRUNE_CAND_SET_BOUND, | |

"iv-always-prune-cand-set-bound", | |

"If number of candidates in the set is smaller, we always try to remove unused ivs during its optimization", | |

10, 0, 0) | |

DEFPARAM(PARAM_SCEV_MAX_EXPR_SIZE, | |

"scev-max-expr-size", | |

"Bound on size of expressions used in the scalar evolutions analyzer", | |

20, 0, 0) | |

DEFPARAM(PARAM_OMEGA_MAX_VARS, | |

"omega-max-vars", | |

"Bound on the number of variables in Omega constraint systems", | |

128, 0, 0) | |

DEFPARAM(PARAM_OMEGA_MAX_GEQS, | |

"omega-max-geqs", | |

"Bound on the number of inequalities in Omega constraint systems", | |

256, 0, 0) | |

DEFPARAM(PARAM_OMEGA_MAX_EQS, | |

"omega-max-eqs", | |

"Bound on the number of equalities in Omega constraint systems", | |

128, 0, 0) | |

DEFPARAM(PARAM_OMEGA_MAX_WILD_CARDS, | |

"omega-max-wild-cards", | |

"Bound on the number of wild cards in Omega constraint systems", | |

18, 0, 0) | |

DEFPARAM(PARAM_OMEGA_HASH_TABLE_SIZE, | |

"omega-hash-table-size", | |

"Bound on the size of the hash table in Omega constraint systems", | |

550, 0, 0) | |

DEFPARAM(PARAM_OMEGA_MAX_KEYS, | |

"omega-max-keys", | |

"Bound on the number of keys in Omega constraint systems", | |

500, 0, 0) | |

DEFPARAM(PARAM_OMEGA_ELIMINATE_REDUNDANT_CONSTRAINTS, | |

"omega-eliminate-redundant-constraints", | |

"When set to 1, use expensive methods to eliminate all redundant constraints", | |

0, 0, 1) | |

DEFPARAM(PARAM_VECT_MAX_VERSION_FOR_ALIGNMENT_CHECKS, | |

"vect-max-version-for-alignment-checks", | |

"Bound on number of runtime checks inserted by the vectorizer's loop versioning for alignment check", | |

6, 0, 0) | |

DEFPARAM(PARAM_VECT_MAX_VERSION_FOR_ALIAS_CHECKS, | |

"vect-max-version-for-alias-checks", | |

"Bound on number of runtime checks inserted by the vectorizer's loop versioning for alias check", | |

10, 0, 0) | |

DEFPARAM(PARAM_MAX_CSELIB_MEMORY_LOCATIONS, | |

"max-cselib-memory-locations", | |

"The maximum memory locations recorded by cselib", | |

500, 0, 0) | |

#ifdef ENABLE_GC_ALWAYS_COLLECT | |

# define GGC_MIN_EXPAND_DEFAULT 0 | |

# define GGC_MIN_HEAPSIZE_DEFAULT 0 | |

#else | |

# define GGC_MIN_EXPAND_DEFAULT 30 | |

# define GGC_MIN_HEAPSIZE_DEFAULT 4096 | |

#endif | |

DEFPARAM(GGC_MIN_EXPAND, | |

"ggc-min-expand", | |

"Minimum heap expansion to trigger garbage collection, as a percentage of the total size of the heap", | |

GGC_MIN_EXPAND_DEFAULT, 0, 0) | |

DEFPARAM(GGC_MIN_HEAPSIZE, | |

"ggc-min-heapsize", | |

"Minimum heap size before we start collecting garbage, in kilobytes", | |

GGC_MIN_HEAPSIZE_DEFAULT, 0, 0) | |

#undef GGC_MIN_EXPAND_DEFAULT | |

#undef GGC_MIN_HEAPSIZE_DEFAULT | |

DEFPARAM(PARAM_MAX_RELOAD_SEARCH_INSNS, | |

"max-reload-search-insns", | |

"The maximum number of instructions to search backward when looking for equivalent reload", | |

100, 0, 0) | |

DEFPARAM(PARAM_MAX_ALIASED_VOPS, | |

"max-aliased-vops", | |

"The maximum number of virtual operators that a function is allowed to have before triggering memory partitioning heuristics", | |

100, 0, 0) | |

DEFPARAM(PARAM_AVG_ALIASED_VOPS, | |

"avg-aliased-vops", | |

"The average number of virtual operators that memory statements are allowed to have before triggering memory partitioning heuristics", | |

1, 0, 0) | |

DEFPARAM(PARAM_MAX_SCHED_REGION_BLOCKS, | |

"max-sched-region-blocks", | |

"The maximum number of blocks in a region to be considered for interblock scheduling", | |

10, 0, 0) | |

DEFPARAM(PARAM_MAX_SCHED_REGION_INSNS, | |

"max-sched-region-insns", | |

"The maximum number of insns in a region to be considered for interblock scheduling", | |

100, 0, 0) | |

DEFPARAM(PARAM_MAX_PIPELINE_REGION_BLOCKS, | |

"max-pipeline-region-blocks", | |

"The maximum number of blocks in a region to be considered for interblock scheduling", | |

15, 0, 0) | |

DEFPARAM(PARAM_MAX_PIPELINE_REGION_INSNS, | |

"max-pipeline-region-insns", | |

"The maximum number of insns in a region to be considered for interblock scheduling", | |

200, 0, 0) | |

DEFPARAM(PARAM_MIN_SPEC_PROB, | |

"min-spec-prob", | |

"The minimum probability of reaching a source block for interblock speculative scheduling", | |

40, 0, 0) | |

DEFPARAM(PARAM_MAX_SCHED_EXTEND_REGIONS_ITERS, | |

"max-sched-extend-regions-iters", | |

"The maximum number of iterations through CFG to extend regions", | |

0, 0, 0) | |

DEFPARAM(PARAM_MAX_SCHED_INSN_CONFLICT_DELAY, | |

"max-sched-insn-conflict-delay", | |

"The maximum conflict delay for an insn to be considered for speculative motion", | |

3, 1, 10) | |

DEFPARAM(PARAM_SCHED_SPEC_PROB_CUTOFF, | |

"sched-spec-prob-cutoff", | |

"The minimal probability of speculation success (in percents), so that speculative insn will be scheduled.", | |

40, 0, 100) | |

DEFPARAM(PARAM_SELSCHED_MAX_LOOKAHEAD, | |

"selsched-max-lookahead", | |

"The maximum size of the lookahead window of selective scheduling", | |

50, 0, 0) | |

DEFPARAM(PARAM_SELSCHED_MAX_SCHED_TIMES, | |

"selsched-max-sched-times", | |

"Maximum number of times that an insn could be scheduled", | |

2, 0, 0) | |

DEFPARAM(PARAM_SELSCHED_INSNS_TO_RENAME, | |

"selsched-insns-to-rename", | |

"Maximum number of instructions in the ready list that are considered eligible for renaming", | |

2, 0, 0) | |

DEFPARAM (PARAM_SCHED_MEM_TRUE_DEP_COST, | |

"sched-mem-true-dep-cost", | |

"Minimal distance between possibly conflicting store and load", | |

1, 0, 0) | |

DEFPARAM(PARAM_MAX_LAST_VALUE_RTL, | |

"max-last-value-rtl", | |

"The maximum number of RTL nodes that can be recorded as combiner's last value", | |

10000, 0, 0) | |

/* INTEGER_CST nodes are shared for values [{-1,0} .. N) for | |

{signed,unsigned} integral types. This determines N. | |

Experimentation shows 256 to be a good value. */ | |

DEFPARAM (PARAM_INTEGER_SHARE_LIMIT, | |

"integer-share-limit", | |

"The upper bound for sharing integer constants", | |

256, 2, 2) | |

/* Incremental SSA updates for virtual operands may be very slow if | |

there is a large number of mappings to process. In those cases, it | |

is faster to rewrite the virtual symbols from scratch as if they | |

had been recently introduced. This heuristic cannot be applied to | |

SSA mappings for real SSA names, only symbols kept in FUD chains. | |

PARAM_MIN_VIRTUAL_MAPPINGS specifies the minimum number of virtual | |

mappings that should be registered to trigger the heuristic. | |

PARAM_VIRTUAL_MAPPINGS_TO_SYMS_RATIO specifies the ratio between | |

mappings and symbols. If the number of virtual mappings is | |

PARAM_VIRTUAL_MAPPINGS_TO_SYMS_RATIO bigger than the number of | |

virtual symbols to be updated, then the updater switches to a full | |

update for those symbols. */ | |

DEFPARAM (PARAM_MIN_VIRTUAL_MAPPINGS, | |

"min-virtual-mappings", | |

"Minimum number of virtual mappings to consider switching to full virtual renames", | |

100, 0, 0) | |

DEFPARAM (PARAM_VIRTUAL_MAPPINGS_TO_SYMS_RATIO, | |

"virtual-mappings-ratio", | |

"Ratio between virtual mappings and virtual symbols to do full virtual renames", | |

3, 0, 0) | |

DEFPARAM (PARAM_SSP_BUFFER_SIZE, | |

"ssp-buffer-size", | |

"The lower bound for a buffer to be considered for stack smashing protection", | |

8, 1, 0) | |

/* When we thread through a block we have to make copies of the | |

statements within the block. Clearly for large blocks the code | |

duplication is bad. | |

PARAM_MAX_JUMP_THREAD_DUPLICATION_STMTS specifies the maximum number | |

of statements and PHI nodes allowed in a block which is going to | |

be duplicated for thread jumping purposes. | |

Some simple analysis showed that more than 99% of the jump | |

threading opportunities are for blocks with less than 15 | |

statements. So we can get the benefits of jump threading | |

without excessive code bloat for pathological cases with the | |

throttle set at 15 statements. */ | |

DEFPARAM (PARAM_MAX_JUMP_THREAD_DUPLICATION_STMTS, | |

"max-jump-thread-duplication-stmts", | |

"Maximum number of statements allowed in a block that needs to be duplicated when threading jumps", | |

15, 0, 0) | |

/* This is the maximum number of fields a variable may have before the pointer analysis machinery | |

will stop trying to treat it in a field-sensitive manner. | |

There are programs out there with thousands of fields per structure, and handling them | |

field-sensitively is not worth the cost. */ | |

DEFPARAM (PARAM_MAX_FIELDS_FOR_FIELD_SENSITIVE, | |

"max-fields-for-field-sensitive", | |

"Maximum number of fields in a structure before pointer analysis treats the structure as a single variable", | |

0, 0, 0) | |

DEFPARAM(PARAM_MAX_SCHED_READY_INSNS, | |

"max-sched-ready-insns", | |

"The maximum number of instructions ready to be issued to be considered by the scheduler during the first scheduling pass", | |

100, 0, 0) | |

/* Prefetching and cache-optimizations related parameters. Default values are | |

usually set by machine description. */ | |

/* The number of insns executed before prefetch is completed. */ | |

DEFPARAM (PARAM_PREFETCH_LATENCY, | |

"prefetch-latency", | |

"The number of insns executed before prefetch is completed", | |

200, 0, 0) | |

/* The number of prefetches that can run at the same time. */ | |

DEFPARAM (PARAM_SIMULTANEOUS_PREFETCHES, | |

"simultaneous-prefetches", | |

"The number of prefetches that can run at the same time", | |

3, 0, 0) | |

/* The size of L1 cache in kB. */ | |

DEFPARAM (PARAM_L1_CACHE_SIZE, | |

"l1-cache-size", | |

"The size of L1 cache", | |

64, 0, 0) | |

/* The size of L1 cache line in bytes. */ | |

DEFPARAM (PARAM_L1_CACHE_LINE_SIZE, | |

"l1-cache-line-size", | |

"The size of L1 cache line", | |

32, 0, 0) | |

/* The size of L2 cache in kB. */ | |

DEFPARAM (PARAM_L2_CACHE_SIZE, | |

"l2-cache-size", | |

"The size of L2 cache", | |

512, 0, 0) | |

/* Whether we should use canonical types rather than deep "structural" | |

type checking. Setting this value to 1 (the default) improves | |

compilation performance in the C++ and Objective-C++ front end; | |

this value should only be set to zero to work around bugs in the | |

canonical type system by disabling it. */ | |

DEFPARAM (PARAM_USE_CANONICAL_TYPES, | |

"use-canonical-types", | |

"Whether to use canonical types", | |

1, 0, 1) | |

DEFPARAM (PARAM_MAX_PARTIAL_ANTIC_LENGTH, | |

"max-partial-antic-length", | |

"Maximum length of partial antic set when performing tree pre optimization", | |

100, 0, 0) | |

/* The following is used as a stop-gap limit for cases where really huge | |

SCCs blow up memory and compile-time use too much. If we hit this limit, | |

SCCVN and such FRE and PRE will be not done at all for the current | |

function. */ | |

DEFPARAM (PARAM_SCCVN_MAX_SCC_SIZE, | |

"sccvn-max-scc-size", | |

"Maximum size of a SCC before SCCVN stops processing a function", | |

10000, 10, 0) | |

DEFPARAM (PARAM_IRA_MAX_LOOPS_NUM, | |

"ira-max-loops-num", | |

"max loops number for regional RA", | |

100, 0, 0) | |

DEFPARAM (PARAM_IRA_MAX_CONFLICT_TABLE_SIZE, | |

"ira-max-conflict-table-size", | |

"max size of conflict table in MB", | |

1000, 0, 0) | |

/* Switch initialization conversion will refuse to create arrays that are | |

bigger than this parameter times the number of switch branches. */ | |

DEFPARAM (PARAM_SWITCH_CONVERSION_BRANCH_RATIO, | |

"switch-conversion-max-branch-ratio", | |

"The maximum ratio between array size and switch branches for " | |

"a switch conversion to take place", | |

8, 1, 0) | |

/* Avoid doing loop invariant motion on very large loops. */ | |

DEFPARAM (PARAM_LOOP_INVARIANT_MAX_BBS_IN_LOOP, | |

"loop-invariant-max-bbs-in-loop", | |

"max basic blocks number in loop for loop invariant motion", | |

10000, 0, 0) | |

/* | |

Local variables: | |

mode:c | |

End: | |

*/ |