blob: 8c55fa737619915329689fe7ec8f6d72aba78e8b [file] [log] [blame]
/* Analysis Utilities for Loop Vectorization.
Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008 Free Software
Foundation, Inc.
Contributed by Dorit Naishlos <dorit@il.ibm.com>
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING3. If not see
<http://www.gnu.org/licenses/>. */
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "ggc.h"
#include "tree.h"
#include "target.h"
#include "basic-block.h"
#include "diagnostic.h"
#include "tree-flow.h"
#include "tree-dump.h"
#include "timevar.h"
#include "cfgloop.h"
#include "expr.h"
#include "optabs.h"
#include "params.h"
#include "tree-chrec.h"
#include "tree-data-ref.h"
#include "tree-scalar-evolution.h"
#include "tree-vectorizer.h"
#include "toplev.h"
#include "recog.h"
static bool vect_can_advance_ivs_p (loop_vec_info);
/* Return the smallest scalar part of STMT.
This is used to determine the vectype of the stmt. We generally set the
vectype according to the type of the result (lhs). For stmts whose
result-type is different than the type of the arguments (e.g., demotion,
promotion), vectype will be reset appropriately (later). Note that we have
to visit the smallest datatype in this function, because that determines the
VF. If the smallest datatype in the loop is present only as the rhs of a
promotion operation - we'd miss it.
Such a case, where a variable of this datatype does not appear in the lhs
anywhere in the loop, can only occur if it's an invariant: e.g.:
'int_x = (int) short_inv', which we'd expect to have been optimized away by
invariant motion. However, we cannot rely on invariant motion to always take
invariants out of the loop, and so in the case of promotion we also have to
check the rhs.
LHS_SIZE_UNIT and RHS_SIZE_UNIT contain the sizes of the corresponding
types. */
tree
vect_get_smallest_scalar_type (gimple stmt, HOST_WIDE_INT *lhs_size_unit,
HOST_WIDE_INT *rhs_size_unit)
{
tree scalar_type = gimple_expr_type (stmt);
HOST_WIDE_INT lhs, rhs;
lhs = rhs = TREE_INT_CST_LOW (TYPE_SIZE_UNIT (scalar_type));
if (is_gimple_assign (stmt)
&& (gimple_assign_cast_p (stmt)
|| gimple_assign_rhs_code (stmt) == WIDEN_MULT_EXPR
|| gimple_assign_rhs_code (stmt) == FLOAT_EXPR))
{
tree rhs_type = TREE_TYPE (gimple_assign_rhs1 (stmt));
rhs = TREE_INT_CST_LOW (TYPE_SIZE_UNIT (rhs_type));
if (rhs < lhs)
scalar_type = rhs_type;
}
*lhs_size_unit = lhs;
*rhs_size_unit = rhs;
return scalar_type;
}
/* Function vect_determine_vectorization_factor
Determine the vectorization factor (VF). VF is the number of data elements
that are operated upon in parallel in a single iteration of the vectorized
loop. For example, when vectorizing a loop that operates on 4byte elements,
on a target with vector size (VS) 16byte, the VF is set to 4, since 4
elements can fit in a single vector register.
We currently support vectorization of loops in which all types operated upon
are of the same size. Therefore this function currently sets VF according to
the size of the types operated upon, and fails if there are multiple sizes
in the loop.
VF is also the factor by which the loop iterations are strip-mined, e.g.:
original loop:
for (i=0; i<N; i++){
a[i] = b[i] + c[i];
}
vectorized loop:
for (i=0; i<N; i+=VF){
a[i:VF] = b[i:VF] + c[i:VF];
}
*/
static bool
vect_determine_vectorization_factor (loop_vec_info loop_vinfo)
{
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo);
int nbbs = loop->num_nodes;
gimple_stmt_iterator si;
unsigned int vectorization_factor = 0;
tree scalar_type;
gimple phi;
tree vectype;
unsigned int nunits;
stmt_vec_info stmt_info;
int i;
HOST_WIDE_INT dummy;
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "=== vect_determine_vectorization_factor ===");
for (i = 0; i < nbbs; i++)
{
basic_block bb = bbs[i];
for (si = gsi_start_phis (bb); !gsi_end_p (si); gsi_next (&si))
{
phi = gsi_stmt (si);
stmt_info = vinfo_for_stmt (phi);
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "==> examining phi: ");
print_gimple_stmt (vect_dump, phi, 0, TDF_SLIM);
}
gcc_assert (stmt_info);
if (STMT_VINFO_RELEVANT_P (stmt_info))
{
gcc_assert (!STMT_VINFO_VECTYPE (stmt_info));
scalar_type = TREE_TYPE (PHI_RESULT (phi));
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "get vectype for scalar type: ");
print_generic_expr (vect_dump, scalar_type, TDF_SLIM);
}
vectype = get_vectype_for_scalar_type (scalar_type);
if (!vectype)
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
{
fprintf (vect_dump,
"not vectorized: unsupported data-type ");
print_generic_expr (vect_dump, scalar_type, TDF_SLIM);
}
return false;
}
STMT_VINFO_VECTYPE (stmt_info) = vectype;
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "vectype: ");
print_generic_expr (vect_dump, vectype, TDF_SLIM);
}
nunits = TYPE_VECTOR_SUBPARTS (vectype);
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "nunits = %d", nunits);
if (!vectorization_factor
|| (nunits > vectorization_factor))
vectorization_factor = nunits;
}
}
for (si = gsi_start_bb (bb); !gsi_end_p (si); gsi_next (&si))
{
gimple stmt = gsi_stmt (si);
stmt_info = vinfo_for_stmt (stmt);
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "==> examining statement: ");
print_gimple_stmt (vect_dump, stmt, 0, TDF_SLIM);
}
if (gimple_has_volatile_ops (stmt))
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
fprintf (vect_dump, "not vectorized: stmt has volatile"
" operands");
return false;
}
gcc_assert (stmt_info);
/* skip stmts which do not need to be vectorized. */
if (!STMT_VINFO_RELEVANT_P (stmt_info)
&& !STMT_VINFO_LIVE_P (stmt_info))
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "skip.");
continue;
}
if (gimple_get_lhs (stmt) == NULL_TREE)
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
{
fprintf (vect_dump, "not vectorized: irregular stmt.");
print_gimple_stmt (vect_dump, stmt, 0, TDF_SLIM);
}
return false;
}
if (VECTOR_MODE_P (TYPE_MODE (gimple_expr_type (stmt))))
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
{
fprintf (vect_dump, "not vectorized: vector stmt in loop:");
print_gimple_stmt (vect_dump, stmt, 0, TDF_SLIM);
}
return false;
}
if (STMT_VINFO_VECTYPE (stmt_info))
{
/* The only case when a vectype had been already set is for stmts
that contain a dataref, or for "pattern-stmts" (stmts generated
by the vectorizer to represent/replace a certain idiom). */
gcc_assert (STMT_VINFO_DATA_REF (stmt_info)
|| is_pattern_stmt_p (stmt_info));
vectype = STMT_VINFO_VECTYPE (stmt_info);
}
else
{
gcc_assert (! STMT_VINFO_DATA_REF (stmt_info)
&& !is_pattern_stmt_p (stmt_info));
scalar_type = vect_get_smallest_scalar_type (stmt, &dummy,
&dummy);
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "get vectype for scalar type: ");
print_generic_expr (vect_dump, scalar_type, TDF_SLIM);
}
vectype = get_vectype_for_scalar_type (scalar_type);
if (!vectype)
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
{
fprintf (vect_dump,
"not vectorized: unsupported data-type ");
print_generic_expr (vect_dump, scalar_type, TDF_SLIM);
}
return false;
}
STMT_VINFO_VECTYPE (stmt_info) = vectype;
}
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "vectype: ");
print_generic_expr (vect_dump, vectype, TDF_SLIM);
}
nunits = TYPE_VECTOR_SUBPARTS (vectype);
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "nunits = %d", nunits);
if (!vectorization_factor
|| (nunits > vectorization_factor))
vectorization_factor = nunits;
}
}
/* TODO: Analyze cost. Decide if worth while to vectorize. */
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "vectorization factor = %d", vectorization_factor);
if (vectorization_factor <= 1)
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
fprintf (vect_dump, "not vectorized: unsupported data-type");
return false;
}
LOOP_VINFO_VECT_FACTOR (loop_vinfo) = vectorization_factor;
return true;
}
/* SLP costs are calculated according to SLP instance unrolling factor (i.e.,
the number of created vector stmts depends on the unrolling factor). However,
the actual number of vector stmts for every SLP node depends on VF which is
set later in vect_analyze_operations(). Hence, SLP costs should be updated.
In this function we assume that the inside costs calculated in
vect_model_xxx_cost are linear in ncopies. */
static void
vect_update_slp_costs_according_to_vf (loop_vec_info loop_vinfo)
{
unsigned int i, vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo);
VEC (slp_instance, heap) *slp_instances = LOOP_VINFO_SLP_INSTANCES (loop_vinfo);
slp_instance instance;
if (vect_print_dump_info (REPORT_SLP))
fprintf (vect_dump, "=== vect_update_slp_costs_according_to_vf ===");
for (i = 0; VEC_iterate (slp_instance, slp_instances, i, instance); i++)
/* We assume that costs are linear in ncopies. */
SLP_INSTANCE_INSIDE_OF_LOOP_COST (instance) *= vf
/ SLP_INSTANCE_UNROLLING_FACTOR (instance);
}
/* Function vect_analyze_operations.
Scan the loop stmts and make sure they are all vectorizable. */
static bool
vect_analyze_operations (loop_vec_info loop_vinfo)
{
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo);
int nbbs = loop->num_nodes;
gimple_stmt_iterator si;
unsigned int vectorization_factor = 0;
int i;
bool ok;
gimple phi;
stmt_vec_info stmt_info;
bool need_to_vectorize = false;
int min_profitable_iters;
int min_scalar_loop_bound;
unsigned int th;
bool only_slp_in_loop = true;
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "=== vect_analyze_operations ===");
gcc_assert (LOOP_VINFO_VECT_FACTOR (loop_vinfo));
vectorization_factor = LOOP_VINFO_VECT_FACTOR (loop_vinfo);
for (i = 0; i < nbbs; i++)
{
basic_block bb = bbs[i];
for (si = gsi_start_phis (bb); !gsi_end_p (si); gsi_next (&si))
{
phi = gsi_stmt (si);
ok = true;
stmt_info = vinfo_for_stmt (phi);
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "examining phi: ");
print_gimple_stmt (vect_dump, phi, 0, TDF_SLIM);
}
if (! is_loop_header_bb_p (bb))
{
/* inner-loop loop-closed exit phi in outer-loop vectorization
(i.e. a phi in the tail of the outer-loop).
FORNOW: we currently don't support the case that these phis
are not used in the outerloop, cause this case requires
to actually do something here. */
if (!STMT_VINFO_RELEVANT_P (stmt_info)
|| STMT_VINFO_LIVE_P (stmt_info))
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump,
"Unsupported loop-closed phi in outer-loop.");
return false;
}
continue;
}
gcc_assert (stmt_info);
if (STMT_VINFO_LIVE_P (stmt_info))
{
/* FORNOW: not yet supported. */
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
fprintf (vect_dump, "not vectorized: value used after loop.");
return false;
}
if (STMT_VINFO_RELEVANT (stmt_info) == vect_used_in_loop
&& STMT_VINFO_DEF_TYPE (stmt_info) != vect_induction_def)
{
/* A scalar-dependence cycle that we don't support. */
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
fprintf (vect_dump, "not vectorized: scalar dependence cycle.");
return false;
}
if (STMT_VINFO_RELEVANT_P (stmt_info))
{
need_to_vectorize = true;
if (STMT_VINFO_DEF_TYPE (stmt_info) == vect_induction_def)
ok = vectorizable_induction (phi, NULL, NULL);
}
if (!ok)
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
{
fprintf (vect_dump,
"not vectorized: relevant phi not supported: ");
print_gimple_stmt (vect_dump, phi, 0, TDF_SLIM);
}
return false;
}
}
for (si = gsi_start_bb (bb); !gsi_end_p (si); gsi_next (&si))
{
gimple stmt = gsi_stmt (si);
stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
enum vect_relevant relevance = STMT_VINFO_RELEVANT (stmt_info);
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "==> examining statement: ");
print_gimple_stmt (vect_dump, stmt, 0, TDF_SLIM);
}
gcc_assert (stmt_info);
/* skip stmts which do not need to be vectorized.
this is expected to include:
- the COND_EXPR which is the loop exit condition
- any LABEL_EXPRs in the loop
- computations that are used only for array indexing or loop
control */
if (!STMT_VINFO_RELEVANT_P (stmt_info)
&& !STMT_VINFO_LIVE_P (stmt_info))
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "irrelevant.");
continue;
}
switch (STMT_VINFO_DEF_TYPE (stmt_info))
{
case vect_loop_def:
break;
case vect_reduction_def:
gcc_assert (relevance == vect_used_in_outer
|| relevance == vect_used_in_outer_by_reduction
|| relevance == vect_unused_in_loop);
break;
case vect_induction_def:
case vect_constant_def:
case vect_invariant_def:
case vect_unknown_def_type:
default:
gcc_unreachable ();
}
if (STMT_VINFO_RELEVANT_P (stmt_info))
{
gcc_assert (!VECTOR_MODE_P (TYPE_MODE (gimple_expr_type (stmt))));
gcc_assert (STMT_VINFO_VECTYPE (stmt_info));
need_to_vectorize = true;
}
ok = true;
if (STMT_VINFO_RELEVANT_P (stmt_info)
|| STMT_VINFO_DEF_TYPE (stmt_info) == vect_reduction_def)
ok = (vectorizable_type_promotion (stmt, NULL, NULL, NULL)
|| vectorizable_type_demotion (stmt, NULL, NULL, NULL)
|| vectorizable_conversion (stmt, NULL, NULL, NULL)
|| vectorizable_operation (stmt, NULL, NULL, NULL)
|| vectorizable_assignment (stmt, NULL, NULL, NULL)
|| vectorizable_load (stmt, NULL, NULL, NULL, NULL)
|| vectorizable_call (stmt, NULL, NULL)
|| vectorizable_store (stmt, NULL, NULL, NULL)
|| vectorizable_condition (stmt, NULL, NULL)
|| vectorizable_reduction (stmt, NULL, NULL));
if (!ok)
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
{
fprintf (vect_dump, "not vectorized: relevant stmt not ");
fprintf (vect_dump, "supported: ");
print_gimple_stmt (vect_dump, stmt, 0, TDF_SLIM);
}
return false;
}
/* Stmts that are (also) "live" (i.e. - that are used out of the loop)
need extra handling, except for vectorizable reductions. */
if (STMT_VINFO_LIVE_P (stmt_info)
&& STMT_VINFO_TYPE (stmt_info) != reduc_vec_info_type)
ok = vectorizable_live_operation (stmt, NULL, NULL);
if (!ok)
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
{
fprintf (vect_dump, "not vectorized: live stmt not ");
fprintf (vect_dump, "supported: ");
print_gimple_stmt (vect_dump, stmt, 0, TDF_SLIM);
}
return false;
}
if (!PURE_SLP_STMT (stmt_info))
{
/* STMT needs loop-based vectorization. */
only_slp_in_loop = false;
/* Groups of strided accesses whose size is not a power of 2 are
not vectorizable yet using loop-vectorization. Therefore, if
this stmt feeds non-SLP-able stmts (i.e., this stmt has to be
both SLPed and loop-based vectorized), the loop cannot be
vectorized. */
if (STMT_VINFO_STRIDED_ACCESS (stmt_info)
&& exact_log2 (DR_GROUP_SIZE (vinfo_for_stmt (
DR_GROUP_FIRST_DR (stmt_info)))) == -1)
{
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "not vectorized: the size of group "
"of strided accesses is not a power of 2");
print_gimple_stmt (vect_dump, stmt, 0, TDF_SLIM);
}
return false;
}
}
} /* stmts in bb */
} /* bbs */
/* All operations in the loop are either irrelevant (deal with loop
control, or dead), or only used outside the loop and can be moved
out of the loop (e.g. invariants, inductions). The loop can be
optimized away by scalar optimizations. We're better off not
touching this loop. */
if (!need_to_vectorize)
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump,
"All the computation can be taken out of the loop.");
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
fprintf (vect_dump,
"not vectorized: redundant loop. no profit to vectorize.");
return false;
}
/* If all the stmts in the loop can be SLPed, we perform only SLP, and
vectorization factor of the loop is the unrolling factor required by the
SLP instances. If that unrolling factor is 1, we say, that we perform
pure SLP on loop - cross iteration parallelism is not exploited. */
if (only_slp_in_loop)
vectorization_factor = LOOP_VINFO_SLP_UNROLLING_FACTOR (loop_vinfo);
else
vectorization_factor = least_common_multiple (vectorization_factor,
LOOP_VINFO_SLP_UNROLLING_FACTOR (loop_vinfo));
LOOP_VINFO_VECT_FACTOR (loop_vinfo) = vectorization_factor;
if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)
&& vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump,
"vectorization_factor = %d, niters = " HOST_WIDE_INT_PRINT_DEC,
vectorization_factor, LOOP_VINFO_INT_NITERS (loop_vinfo));
if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)
&& (LOOP_VINFO_INT_NITERS (loop_vinfo) < vectorization_factor))
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
fprintf (vect_dump, "not vectorized: iteration count too small.");
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump,"not vectorized: iteration count smaller than "
"vectorization factor.");
return false;
}
/* Analyze cost. Decide if worth while to vectorize. */
/* Once VF is set, SLP costs should be updated since the number of created
vector stmts depends on VF. */
vect_update_slp_costs_according_to_vf (loop_vinfo);
min_profitable_iters = vect_estimate_min_profitable_iters (loop_vinfo);
LOOP_VINFO_COST_MODEL_MIN_ITERS (loop_vinfo) = min_profitable_iters;
if (min_profitable_iters < 0)
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
fprintf (vect_dump, "not vectorized: vectorization not profitable.");
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "not vectorized: vector version will never be "
"profitable.");
return false;
}
min_scalar_loop_bound = ((PARAM_VALUE (PARAM_MIN_VECT_LOOP_BOUND)
* vectorization_factor) - 1);
/* Use the cost model only if it is more conservative than user specified
threshold. */
th = (unsigned) min_scalar_loop_bound;
if (min_profitable_iters
&& (!min_scalar_loop_bound
|| min_profitable_iters > min_scalar_loop_bound))
th = (unsigned) min_profitable_iters;
if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)
&& LOOP_VINFO_INT_NITERS (loop_vinfo) <= th)
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
fprintf (vect_dump, "not vectorized: vectorization not "
"profitable.");
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "not vectorized: iteration count smaller than "
"user specified loop bound parameter or minimum "
"profitable iterations (whichever is more conservative).");
return false;
}
if (!LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)
|| LOOP_VINFO_INT_NITERS (loop_vinfo) % vectorization_factor != 0
|| LOOP_PEELING_FOR_ALIGNMENT (loop_vinfo))
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "epilog loop required.");
if (!vect_can_advance_ivs_p (loop_vinfo))
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
fprintf (vect_dump,
"not vectorized: can't create epilog loop 1.");
return false;
}
if (!slpeel_can_duplicate_loop_p (loop, single_exit (loop)))
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
fprintf (vect_dump,
"not vectorized: can't create epilog loop 2.");
return false;
}
}
return true;
}
/* Function exist_non_indexing_operands_for_use_p
USE is one of the uses attached to STMT. Check if USE is
used in STMT for anything other than indexing an array. */
static bool
exist_non_indexing_operands_for_use_p (tree use, gimple stmt)
{
tree operand;
stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
/* USE corresponds to some operand in STMT. If there is no data
reference in STMT, then any operand that corresponds to USE
is not indexing an array. */
if (!STMT_VINFO_DATA_REF (stmt_info))
return true;
/* STMT has a data_ref. FORNOW this means that its of one of
the following forms:
-1- ARRAY_REF = var
-2- var = ARRAY_REF
(This should have been verified in analyze_data_refs).
'var' in the second case corresponds to a def, not a use,
so USE cannot correspond to any operands that are not used
for array indexing.
Therefore, all we need to check is if STMT falls into the
first case, and whether var corresponds to USE. */
if (TREE_CODE (gimple_assign_lhs (stmt)) == SSA_NAME)
return false;
if (!gimple_assign_copy_p (stmt))
return false;
operand = gimple_assign_rhs1 (stmt);
if (TREE_CODE (operand) != SSA_NAME)
return false;
if (operand == use)
return true;
return false;
}
/* Function vect_analyze_scalar_cycles_1.
Examine the cross iteration def-use cycles of scalar variables
in LOOP. LOOP_VINFO represents the loop that is now being
considered for vectorization (can be LOOP, or an outer-loop
enclosing LOOP). */
static void
vect_analyze_scalar_cycles_1 (loop_vec_info loop_vinfo, struct loop *loop)
{
basic_block bb = loop->header;
tree dumy;
VEC(gimple,heap) *worklist = VEC_alloc (gimple, heap, 64);
gimple_stmt_iterator gsi;
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "=== vect_analyze_scalar_cycles ===");
/* First - identify all inductions. */
for (gsi = gsi_start_phis (bb); !gsi_end_p (gsi); gsi_next (&gsi))
{
gimple phi = gsi_stmt (gsi);
tree access_fn = NULL;
tree def = PHI_RESULT (phi);
stmt_vec_info stmt_vinfo = vinfo_for_stmt (phi);
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "Analyze phi: ");
print_gimple_stmt (vect_dump, phi, 0, TDF_SLIM);
}
/* Skip virtual phi's. The data dependences that are associated with
virtual defs/uses (i.e., memory accesses) are analyzed elsewhere. */
if (!is_gimple_reg (SSA_NAME_VAR (def)))
continue;
STMT_VINFO_DEF_TYPE (stmt_vinfo) = vect_unknown_def_type;
/* Analyze the evolution function. */
access_fn = analyze_scalar_evolution (loop, def);
if (access_fn && vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "Access function of PHI: ");
print_generic_expr (vect_dump, access_fn, TDF_SLIM);
}
if (!access_fn
|| !vect_is_simple_iv_evolution (loop->num, access_fn, &dumy, &dumy))
{
VEC_safe_push (gimple, heap, worklist, phi);
continue;
}
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "Detected induction.");
STMT_VINFO_DEF_TYPE (stmt_vinfo) = vect_induction_def;
}
/* Second - identify all reductions. */
while (VEC_length (gimple, worklist) > 0)
{
gimple phi = VEC_pop (gimple, worklist);
tree def = PHI_RESULT (phi);
stmt_vec_info stmt_vinfo = vinfo_for_stmt (phi);
gimple reduc_stmt;
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "Analyze phi: ");
print_gimple_stmt (vect_dump, phi, 0, TDF_SLIM);
}
gcc_assert (is_gimple_reg (SSA_NAME_VAR (def)));
gcc_assert (STMT_VINFO_DEF_TYPE (stmt_vinfo) == vect_unknown_def_type);
reduc_stmt = vect_is_simple_reduction (loop_vinfo, phi);
if (reduc_stmt)
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "Detected reduction.");
STMT_VINFO_DEF_TYPE (stmt_vinfo) = vect_reduction_def;
STMT_VINFO_DEF_TYPE (vinfo_for_stmt (reduc_stmt)) =
vect_reduction_def;
}
else
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "Unknown def-use cycle pattern.");
}
VEC_free (gimple, heap, worklist);
return;
}
/* Function vect_analyze_scalar_cycles.
Examine the cross iteration def-use cycles of scalar variables, by
analyzing the loop-header PHIs of scalar variables; Classify each
cycle as one of the following: invariant, induction, reduction, unknown.
We do that for the loop represented by LOOP_VINFO, and also to its
inner-loop, if exists.
Examples for scalar cycles:
Example1: reduction:
loop1:
for (i=0; i<N; i++)
sum += a[i];
Example2: induction:
loop2:
for (i=0; i<N; i++)
a[i] = i; */
static void
vect_analyze_scalar_cycles (loop_vec_info loop_vinfo)
{
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
vect_analyze_scalar_cycles_1 (loop_vinfo, loop);
/* When vectorizing an outer-loop, the inner-loop is executed sequentially.
Reductions in such inner-loop therefore have different properties than
the reductions in the nest that gets vectorized:
1. When vectorized, they are executed in the same order as in the original
scalar loop, so we can't change the order of computation when
vectorizing them.
2. FIXME: Inner-loop reductions can be used in the inner-loop, so the
current checks are too strict. */
if (loop->inner)
vect_analyze_scalar_cycles_1 (loop_vinfo, loop->inner);
}
/* Find the place of the data-ref in STMT in the interleaving chain that starts
from FIRST_STMT. Return -1 if the data-ref is not a part of the chain. */
static int
vect_get_place_in_interleaving_chain (gimple stmt, gimple first_stmt)
{
gimple next_stmt = first_stmt;
int result = 0;
if (first_stmt != DR_GROUP_FIRST_DR (vinfo_for_stmt (stmt)))
return -1;
while (next_stmt && next_stmt != stmt)
{
result++;
next_stmt = DR_GROUP_NEXT_DR (vinfo_for_stmt (next_stmt));
}
if (next_stmt)
return result;
else
return -1;
}
/* Function vect_insert_into_interleaving_chain.
Insert DRA into the interleaving chain of DRB according to DRA's INIT. */
static void
vect_insert_into_interleaving_chain (struct data_reference *dra,
struct data_reference *drb)
{
gimple prev, next;
tree next_init;
stmt_vec_info stmtinfo_a = vinfo_for_stmt (DR_STMT (dra));
stmt_vec_info stmtinfo_b = vinfo_for_stmt (DR_STMT (drb));
prev = DR_GROUP_FIRST_DR (stmtinfo_b);
next = DR_GROUP_NEXT_DR (vinfo_for_stmt (prev));
while (next)
{
next_init = DR_INIT (STMT_VINFO_DATA_REF (vinfo_for_stmt (next)));
if (tree_int_cst_compare (next_init, DR_INIT (dra)) > 0)
{
/* Insert here. */
DR_GROUP_NEXT_DR (vinfo_for_stmt (prev)) = DR_STMT (dra);
DR_GROUP_NEXT_DR (stmtinfo_a) = next;
return;
}
prev = next;
next = DR_GROUP_NEXT_DR (vinfo_for_stmt (prev));
}
/* We got to the end of the list. Insert here. */
DR_GROUP_NEXT_DR (vinfo_for_stmt (prev)) = DR_STMT (dra);
DR_GROUP_NEXT_DR (stmtinfo_a) = NULL;
}
/* Function vect_update_interleaving_chain.
For two data-refs DRA and DRB that are a part of a chain interleaved data
accesses, update the interleaving chain. DRB's INIT is smaller than DRA's.
There are four possible cases:
1. New stmts - both DRA and DRB are not a part of any chain:
FIRST_DR = DRB
NEXT_DR (DRB) = DRA
2. DRB is a part of a chain and DRA is not:
no need to update FIRST_DR
no need to insert DRB
insert DRA according to init
3. DRA is a part of a chain and DRB is not:
if (init of FIRST_DR > init of DRB)
FIRST_DR = DRB
NEXT(FIRST_DR) = previous FIRST_DR
else
insert DRB according to its init
4. both DRA and DRB are in some interleaving chains:
choose the chain with the smallest init of FIRST_DR
insert the nodes of the second chain into the first one. */
static void
vect_update_interleaving_chain (struct data_reference *drb,
struct data_reference *dra)
{
stmt_vec_info stmtinfo_a = vinfo_for_stmt (DR_STMT (dra));
stmt_vec_info stmtinfo_b = vinfo_for_stmt (DR_STMT (drb));
tree next_init, init_dra_chain, init_drb_chain;
gimple first_a, first_b;
tree node_init;
gimple node, prev, next, first_stmt;
/* 1. New stmts - both DRA and DRB are not a part of any chain. */
if (!DR_GROUP_FIRST_DR (stmtinfo_a) && !DR_GROUP_FIRST_DR (stmtinfo_b))
{
DR_GROUP_FIRST_DR (stmtinfo_a) = DR_STMT (drb);
DR_GROUP_FIRST_DR (stmtinfo_b) = DR_STMT (drb);
DR_GROUP_NEXT_DR (stmtinfo_b) = DR_STMT (dra);
return;
}
/* 2. DRB is a part of a chain and DRA is not. */
if (!DR_GROUP_FIRST_DR (stmtinfo_a) && DR_GROUP_FIRST_DR (stmtinfo_b))
{
DR_GROUP_FIRST_DR (stmtinfo_a) = DR_GROUP_FIRST_DR (stmtinfo_b);
/* Insert DRA into the chain of DRB. */
vect_insert_into_interleaving_chain (dra, drb);
return;
}
/* 3. DRA is a part of a chain and DRB is not. */
if (DR_GROUP_FIRST_DR (stmtinfo_a) && !DR_GROUP_FIRST_DR (stmtinfo_b))
{
gimple old_first_stmt = DR_GROUP_FIRST_DR (stmtinfo_a);
tree init_old = DR_INIT (STMT_VINFO_DATA_REF (vinfo_for_stmt (
old_first_stmt)));
gimple tmp;
if (tree_int_cst_compare (init_old, DR_INIT (drb)) > 0)
{
/* DRB's init is smaller than the init of the stmt previously marked
as the first stmt of the interleaving chain of DRA. Therefore, we
update FIRST_STMT and put DRB in the head of the list. */
DR_GROUP_FIRST_DR (stmtinfo_b) = DR_STMT (drb);
DR_GROUP_NEXT_DR (stmtinfo_b) = old_first_stmt;
/* Update all the stmts in the list to point to the new FIRST_STMT. */
tmp = old_first_stmt;
while (tmp)
{
DR_GROUP_FIRST_DR (vinfo_for_stmt (tmp)) = DR_STMT (drb);
tmp = DR_GROUP_NEXT_DR (vinfo_for_stmt (tmp));
}
}
else
{
/* Insert DRB in the list of DRA. */
vect_insert_into_interleaving_chain (drb, dra);
DR_GROUP_FIRST_DR (stmtinfo_b) = DR_GROUP_FIRST_DR (stmtinfo_a);
}
return;
}
/* 4. both DRA and DRB are in some interleaving chains. */
first_a = DR_GROUP_FIRST_DR (stmtinfo_a);
first_b = DR_GROUP_FIRST_DR (stmtinfo_b);
if (first_a == first_b)
return;
init_dra_chain = DR_INIT (STMT_VINFO_DATA_REF (vinfo_for_stmt (first_a)));
init_drb_chain = DR_INIT (STMT_VINFO_DATA_REF (vinfo_for_stmt (first_b)));
if (tree_int_cst_compare (init_dra_chain, init_drb_chain) > 0)
{
/* Insert the nodes of DRA chain into the DRB chain.
After inserting a node, continue from this node of the DRB chain (don't
start from the beginning. */
node = DR_GROUP_FIRST_DR (stmtinfo_a);
prev = DR_GROUP_FIRST_DR (stmtinfo_b);
first_stmt = first_b;
}
else
{
/* Insert the nodes of DRB chain into the DRA chain.
After inserting a node, continue from this node of the DRA chain (don't
start from the beginning. */
node = DR_GROUP_FIRST_DR (stmtinfo_b);
prev = DR_GROUP_FIRST_DR (stmtinfo_a);
first_stmt = first_a;
}
while (node)
{
node_init = DR_INIT (STMT_VINFO_DATA_REF (vinfo_for_stmt (node)));
next = DR_GROUP_NEXT_DR (vinfo_for_stmt (prev));
while (next)
{
next_init = DR_INIT (STMT_VINFO_DATA_REF (vinfo_for_stmt (next)));
if (tree_int_cst_compare (next_init, node_init) > 0)
{
/* Insert here. */
DR_GROUP_NEXT_DR (vinfo_for_stmt (prev)) = node;
DR_GROUP_NEXT_DR (vinfo_for_stmt (node)) = next;
prev = node;
break;
}
prev = next;
next = DR_GROUP_NEXT_DR (vinfo_for_stmt (prev));
}
if (!next)
{
/* We got to the end of the list. Insert here. */
DR_GROUP_NEXT_DR (vinfo_for_stmt (prev)) = node;
DR_GROUP_NEXT_DR (vinfo_for_stmt (node)) = NULL;
prev = node;
}
DR_GROUP_FIRST_DR (vinfo_for_stmt (node)) = first_stmt;
node = DR_GROUP_NEXT_DR (vinfo_for_stmt (node));
}
}
/* Function vect_equal_offsets.
Check if OFFSET1 and OFFSET2 are identical expressions. */
static bool
vect_equal_offsets (tree offset1, tree offset2)
{
bool res0, res1;
STRIP_NOPS (offset1);
STRIP_NOPS (offset2);
if (offset1 == offset2)
return true;
if (TREE_CODE (offset1) != TREE_CODE (offset2)
|| !BINARY_CLASS_P (offset1)
|| !BINARY_CLASS_P (offset2))
return false;
res0 = vect_equal_offsets (TREE_OPERAND (offset1, 0),
TREE_OPERAND (offset2, 0));
res1 = vect_equal_offsets (TREE_OPERAND (offset1, 1),
TREE_OPERAND (offset2, 1));
return (res0 && res1);
}
/* Function vect_check_interleaving.
Check if DRA and DRB are a part of interleaving. In case they are, insert
DRA and DRB in an interleaving chain. */
static void
vect_check_interleaving (struct data_reference *dra,
struct data_reference *drb)
{
HOST_WIDE_INT type_size_a, type_size_b, diff_mod_size, step, init_a, init_b;
/* Check that the data-refs have same first location (except init) and they
are both either store or load (not load and store). */
if ((DR_BASE_ADDRESS (dra) != DR_BASE_ADDRESS (drb)
&& (TREE_CODE (DR_BASE_ADDRESS (dra)) != ADDR_EXPR
|| TREE_CODE (DR_BASE_ADDRESS (drb)) != ADDR_EXPR
|| TREE_OPERAND (DR_BASE_ADDRESS (dra), 0)
!= TREE_OPERAND (DR_BASE_ADDRESS (drb),0)))
|| !vect_equal_offsets (DR_OFFSET (dra), DR_OFFSET (drb))
|| !tree_int_cst_compare (DR_INIT (dra), DR_INIT (drb))
|| DR_IS_READ (dra) != DR_IS_READ (drb))
return;
/* Check:
1. data-refs are of the same type
2. their steps are equal
3. the step is greater than the difference between data-refs' inits */
type_size_a = TREE_INT_CST_LOW (TYPE_SIZE_UNIT (TREE_TYPE (DR_REF (dra))));
type_size_b = TREE_INT_CST_LOW (TYPE_SIZE_UNIT (TREE_TYPE (DR_REF (drb))));
if (type_size_a != type_size_b
|| tree_int_cst_compare (DR_STEP (dra), DR_STEP (drb))
|| !types_compatible_p (TREE_TYPE (DR_REF (dra)),
TREE_TYPE (DR_REF (drb))))
return;
init_a = TREE_INT_CST_LOW (DR_INIT (dra));
init_b = TREE_INT_CST_LOW (DR_INIT (drb));
step = TREE_INT_CST_LOW (DR_STEP (dra));
if (init_a > init_b)
{
/* If init_a == init_b + the size of the type * k, we have an interleaving,
and DRB is accessed before DRA. */
diff_mod_size = (init_a - init_b) % type_size_a;
if ((init_a - init_b) > step)
return;
if (diff_mod_size == 0)
{
vect_update_interleaving_chain (drb, dra);
if (vect_print_dump_info (REPORT_DR_DETAILS))
{
fprintf (vect_dump, "Detected interleaving ");
print_generic_expr (vect_dump, DR_REF (dra), TDF_SLIM);
fprintf (vect_dump, " and ");
print_generic_expr (vect_dump, DR_REF (drb), TDF_SLIM);
}
return;
}
}
else
{
/* If init_b == init_a + the size of the type * k, we have an
interleaving, and DRA is accessed before DRB. */
diff_mod_size = (init_b - init_a) % type_size_a;
if ((init_b - init_a) > step)
return;
if (diff_mod_size == 0)
{
vect_update_interleaving_chain (dra, drb);
if (vect_print_dump_info (REPORT_DR_DETAILS))
{
fprintf (vect_dump, "Detected interleaving ");
print_generic_expr (vect_dump, DR_REF (dra), TDF_SLIM);
fprintf (vect_dump, " and ");
print_generic_expr (vect_dump, DR_REF (drb), TDF_SLIM);
}
return;
}
}
}
/* Check if data references pointed by DR_I and DR_J are same or
belong to same interleaving group. Return FALSE if drs are
different, otherwise return TRUE. */
static bool
vect_same_range_drs (data_reference_p dr_i, data_reference_p dr_j)
{
gimple stmt_i = DR_STMT (dr_i);
gimple stmt_j = DR_STMT (dr_j);
if (operand_equal_p (DR_REF (dr_i), DR_REF (dr_j), 0)
|| (DR_GROUP_FIRST_DR (vinfo_for_stmt (stmt_i))
&& DR_GROUP_FIRST_DR (vinfo_for_stmt (stmt_j))
&& (DR_GROUP_FIRST_DR (vinfo_for_stmt (stmt_i))
== DR_GROUP_FIRST_DR (vinfo_for_stmt (stmt_j)))))
return true;
else
return false;
}
/* If address ranges represented by DDR_I and DDR_J are equal,
return TRUE, otherwise return FALSE. */
static bool
vect_vfa_range_equal (ddr_p ddr_i, ddr_p ddr_j)
{
if ((vect_same_range_drs (DDR_A (ddr_i), DDR_A (ddr_j))
&& vect_same_range_drs (DDR_B (ddr_i), DDR_B (ddr_j)))
|| (vect_same_range_drs (DDR_A (ddr_i), DDR_B (ddr_j))
&& vect_same_range_drs (DDR_B (ddr_i), DDR_A (ddr_j))))
return true;
else
return false;
}
/* Insert DDR into LOOP_VINFO list of ddrs that may alias and need to be
tested at run-time. Return TRUE if DDR was successfully inserted.
Return false if versioning is not supported. */
static bool
vect_mark_for_runtime_alias_test (ddr_p ddr, loop_vec_info loop_vinfo)
{
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
if ((unsigned) PARAM_VALUE (PARAM_VECT_MAX_VERSION_FOR_ALIAS_CHECKS) == 0)
return false;
if (vect_print_dump_info (REPORT_DR_DETAILS))
{
fprintf (vect_dump, "mark for run-time aliasing test between ");
print_generic_expr (vect_dump, DR_REF (DDR_A (ddr)), TDF_SLIM);
fprintf (vect_dump, " and ");
print_generic_expr (vect_dump, DR_REF (DDR_B (ddr)), TDF_SLIM);
}
if (optimize_loop_nest_for_size_p (loop))
{
if (vect_print_dump_info (REPORT_DR_DETAILS))
fprintf (vect_dump, "versioning not supported when optimizing for size.");
return false;
}
/* FORNOW: We don't support versioning with outer-loop vectorization. */
if (loop->inner)
{
if (vect_print_dump_info (REPORT_DR_DETAILS))
fprintf (vect_dump, "versioning not yet supported for outer-loops.");
return false;
}
VEC_safe_push (ddr_p, heap, LOOP_VINFO_MAY_ALIAS_DDRS (loop_vinfo), ddr);
return true;
}
/* Function vect_analyze_data_ref_dependence.
Return TRUE if there (might) exist a dependence between a memory-reference
DRA and a memory-reference DRB. When versioning for alias may check a
dependence at run-time, return FALSE. */
static bool
vect_analyze_data_ref_dependence (struct data_dependence_relation *ddr,
loop_vec_info loop_vinfo)
{
unsigned int i;
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
int vectorization_factor = LOOP_VINFO_VECT_FACTOR (loop_vinfo);
struct data_reference *dra = DDR_A (ddr);
struct data_reference *drb = DDR_B (ddr);
stmt_vec_info stmtinfo_a = vinfo_for_stmt (DR_STMT (dra));
stmt_vec_info stmtinfo_b = vinfo_for_stmt (DR_STMT (drb));
int dra_size = GET_MODE_SIZE (TYPE_MODE (TREE_TYPE (DR_REF (dra))));
int drb_size = GET_MODE_SIZE (TYPE_MODE (TREE_TYPE (DR_REF (drb))));
lambda_vector dist_v;
unsigned int loop_depth;
if (DDR_ARE_DEPENDENT (ddr) == chrec_known)
{
/* Independent data accesses. */
vect_check_interleaving (dra, drb);
return false;
}
if ((DR_IS_READ (dra) && DR_IS_READ (drb)) || dra == drb)
return false;
if (DDR_ARE_DEPENDENT (ddr) == chrec_dont_know)
{
if (vect_print_dump_info (REPORT_DR_DETAILS))
{
fprintf (vect_dump,
"versioning for alias required: can't determine dependence between ");
print_generic_expr (vect_dump, DR_REF (dra), TDF_SLIM);
fprintf (vect_dump, " and ");
print_generic_expr (vect_dump, DR_REF (drb), TDF_SLIM);
}
/* Add to list of ddrs that need to be tested at run-time. */
return !vect_mark_for_runtime_alias_test (ddr, loop_vinfo);
}
if (DDR_NUM_DIST_VECTS (ddr) == 0)
{
if (vect_print_dump_info (REPORT_DR_DETAILS))
{
fprintf (vect_dump, "versioning for alias required: bad dist vector for ");
print_generic_expr (vect_dump, DR_REF (dra), TDF_SLIM);
fprintf (vect_dump, " and ");
print_generic_expr (vect_dump, DR_REF (drb), TDF_SLIM);
}
/* Add to list of ddrs that need to be tested at run-time. */
return !vect_mark_for_runtime_alias_test (ddr, loop_vinfo);
}
loop_depth = index_in_loop_nest (loop->num, DDR_LOOP_NEST (ddr));
for (i = 0; VEC_iterate (lambda_vector, DDR_DIST_VECTS (ddr), i, dist_v); i++)
{
int dist = dist_v[loop_depth];
if (vect_print_dump_info (REPORT_DR_DETAILS))
fprintf (vect_dump, "dependence distance = %d.", dist);
/* Same loop iteration. */
if (dist % vectorization_factor == 0 && dra_size == drb_size)
{
/* Two references with distance zero have the same alignment. */
VEC_safe_push (dr_p, heap, STMT_VINFO_SAME_ALIGN_REFS (stmtinfo_a), drb);
VEC_safe_push (dr_p, heap, STMT_VINFO_SAME_ALIGN_REFS (stmtinfo_b), dra);
if (vect_print_dump_info (REPORT_ALIGNMENT))
fprintf (vect_dump, "accesses have the same alignment.");
if (vect_print_dump_info (REPORT_DR_DETAILS))
{
fprintf (vect_dump, "dependence distance modulo vf == 0 between ");
print_generic_expr (vect_dump, DR_REF (dra), TDF_SLIM);
fprintf (vect_dump, " and ");
print_generic_expr (vect_dump, DR_REF (drb), TDF_SLIM);
}
/* For interleaving, mark that there is a read-write dependency if
necessary. We check before that one of the data-refs is store. */
if (DR_IS_READ (dra))
DR_GROUP_READ_WRITE_DEPENDENCE (stmtinfo_a) = true;
else
{
if (DR_IS_READ (drb))
DR_GROUP_READ_WRITE_DEPENDENCE (stmtinfo_b) = true;
}
continue;
}
if (abs (dist) >= vectorization_factor
|| (dist > 0 && DDR_REVERSED_P (ddr)))
{
/* Dependence distance does not create dependence, as far as
vectorization is concerned, in this case. If DDR_REVERSED_P the
order of the data-refs in DDR was reversed (to make distance
vector positive), and the actual distance is negative. */
if (vect_print_dump_info (REPORT_DR_DETAILS))
fprintf (vect_dump, "dependence distance >= VF or negative.");
continue;
}
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
{
fprintf (vect_dump,
"not vectorized, possible dependence "
"between data-refs ");
print_generic_expr (vect_dump, DR_REF (dra), TDF_SLIM);
fprintf (vect_dump, " and ");
print_generic_expr (vect_dump, DR_REF (drb), TDF_SLIM);
}
return true;
}
return false;
}
/* Function vect_analyze_data_ref_dependences.
Examine all the data references in the loop, and make sure there do not
exist any data dependences between them. */
static bool
vect_analyze_data_ref_dependences (loop_vec_info loop_vinfo)
{
unsigned int i;
VEC (ddr_p, heap) * ddrs = LOOP_VINFO_DDRS (loop_vinfo);
struct data_dependence_relation *ddr;
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "=== vect_analyze_dependences ===");
for (i = 0; VEC_iterate (ddr_p, ddrs, i, ddr); i++)
if (vect_analyze_data_ref_dependence (ddr, loop_vinfo))
return false;
return true;
}
/* Function vect_compute_data_ref_alignment
Compute the misalignment of the data reference DR.
Output:
1. If during the misalignment computation it is found that the data reference
cannot be vectorized then false is returned.
2. DR_MISALIGNMENT (DR) is defined.
FOR NOW: No analysis is actually performed. Misalignment is calculated
only for trivial cases. TODO. */
static bool
vect_compute_data_ref_alignment (struct data_reference *dr)
{
gimple stmt = DR_STMT (dr);
stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info);
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
tree ref = DR_REF (dr);
tree vectype;
tree base, base_addr;
bool base_aligned;
tree misalign;
tree aligned_to, alignment;
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "vect_compute_data_ref_alignment:");
/* Initialize misalignment to unknown. */
SET_DR_MISALIGNMENT (dr, -1);
misalign = DR_INIT (dr);
aligned_to = DR_ALIGNED_TO (dr);
base_addr = DR_BASE_ADDRESS (dr);
vectype = STMT_VINFO_VECTYPE (stmt_info);
/* In case the dataref is in an inner-loop of the loop that is being
vectorized (LOOP), we use the base and misalignment information
relative to the outer-loop (LOOP). This is ok only if the misalignment
stays the same throughout the execution of the inner-loop, which is why
we have to check that the stride of the dataref in the inner-loop evenly
divides by the vector size. */
if (nested_in_vect_loop_p (loop, stmt))
{
tree step = DR_STEP (dr);
HOST_WIDE_INT dr_step = TREE_INT_CST_LOW (step);
if (dr_step % GET_MODE_SIZE (TYPE_MODE (vectype)) == 0)
{
if (vect_print_dump_info (REPORT_ALIGNMENT))
fprintf (vect_dump, "inner step divides the vector-size.");
misalign = STMT_VINFO_DR_INIT (stmt_info);
aligned_to = STMT_VINFO_DR_ALIGNED_TO (stmt_info);
base_addr = STMT_VINFO_DR_BASE_ADDRESS (stmt_info);
}
else
{
if (vect_print_dump_info (REPORT_ALIGNMENT))
fprintf (vect_dump, "inner step doesn't divide the vector-size.");
misalign = NULL_TREE;
}
}
base = build_fold_indirect_ref (base_addr);
alignment = ssize_int (TYPE_ALIGN (vectype)/BITS_PER_UNIT);
if ((aligned_to && tree_int_cst_compare (aligned_to, alignment) < 0)
|| !misalign)
{
if (vect_print_dump_info (REPORT_ALIGNMENT))
{
fprintf (vect_dump, "Unknown alignment for access: ");
print_generic_expr (vect_dump, base, TDF_SLIM);
}
return true;
}
if ((DECL_P (base)
&& tree_int_cst_compare (ssize_int (DECL_ALIGN_UNIT (base)),
alignment) >= 0)
|| (TREE_CODE (base_addr) == SSA_NAME
&& tree_int_cst_compare (ssize_int (TYPE_ALIGN_UNIT (TREE_TYPE (
TREE_TYPE (base_addr)))),
alignment) >= 0))
base_aligned = true;
else
base_aligned = false;
if (!base_aligned)
{
/* Do not change the alignment of global variables if
flag_section_anchors is enabled. */
if (!vect_can_force_dr_alignment_p (base, TYPE_ALIGN (vectype))
|| (TREE_STATIC (base) && flag_section_anchors))
{
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "can't force alignment of ref: ");
print_generic_expr (vect_dump, ref, TDF_SLIM);
}
return true;
}
/* Force the alignment of the decl.
NOTE: This is the only change to the code we make during
the analysis phase, before deciding to vectorize the loop. */
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "force alignment");
DECL_ALIGN (base) = TYPE_ALIGN (vectype);
DECL_USER_ALIGN (base) = 1;
}
/* At this point we assume that the base is aligned. */
gcc_assert (base_aligned
|| (TREE_CODE (base) == VAR_DECL
&& DECL_ALIGN (base) >= TYPE_ALIGN (vectype)));
/* Modulo alignment. */
misalign = size_binop (TRUNC_MOD_EXPR, misalign, alignment);
if (!host_integerp (misalign, 1))
{
/* Negative or overflowed misalignment value. */
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "unexpected misalign value");
return false;
}
SET_DR_MISALIGNMENT (dr, TREE_INT_CST_LOW (misalign));
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "misalign = %d bytes of ref ", DR_MISALIGNMENT (dr));
print_generic_expr (vect_dump, ref, TDF_SLIM);
}
return true;
}
/* Function vect_compute_data_refs_alignment
Compute the misalignment of data references in the loop.
Return FALSE if a data reference is found that cannot be vectorized. */
static bool
vect_compute_data_refs_alignment (loop_vec_info loop_vinfo)
{
VEC (data_reference_p, heap) *datarefs = LOOP_VINFO_DATAREFS (loop_vinfo);
struct data_reference *dr;
unsigned int i;
for (i = 0; VEC_iterate (data_reference_p, datarefs, i, dr); i++)
if (!vect_compute_data_ref_alignment (dr))
return false;
return true;
}
/* Function vect_update_misalignment_for_peel
DR - the data reference whose misalignment is to be adjusted.
DR_PEEL - the data reference whose misalignment is being made
zero in the vector loop by the peel.
NPEEL - the number of iterations in the peel loop if the misalignment
of DR_PEEL is known at compile time. */
static void
vect_update_misalignment_for_peel (struct data_reference *dr,
struct data_reference *dr_peel, int npeel)
{
unsigned int i;
VEC(dr_p,heap) *same_align_drs;
struct data_reference *current_dr;
int dr_size = GET_MODE_SIZE (TYPE_MODE (TREE_TYPE (DR_REF (dr))));
int dr_peel_size = GET_MODE_SIZE (TYPE_MODE (TREE_TYPE (DR_REF (dr_peel))));
stmt_vec_info stmt_info = vinfo_for_stmt (DR_STMT (dr));
stmt_vec_info peel_stmt_info = vinfo_for_stmt (DR_STMT (dr_peel));
/* For interleaved data accesses the step in the loop must be multiplied by
the size of the interleaving group. */
if (STMT_VINFO_STRIDED_ACCESS (stmt_info))
dr_size *= DR_GROUP_SIZE (vinfo_for_stmt (DR_GROUP_FIRST_DR (stmt_info)));
if (STMT_VINFO_STRIDED_ACCESS (peel_stmt_info))
dr_peel_size *= DR_GROUP_SIZE (peel_stmt_info);
/* It can be assumed that the data refs with the same alignment as dr_peel
are aligned in the vector loop. */
same_align_drs
= STMT_VINFO_SAME_ALIGN_REFS (vinfo_for_stmt (DR_STMT (dr_peel)));
for (i = 0; VEC_iterate (dr_p, same_align_drs, i, current_dr); i++)
{
if (current_dr != dr)
continue;
gcc_assert (DR_MISALIGNMENT (dr) / dr_size ==
DR_MISALIGNMENT (dr_peel) / dr_peel_size);
SET_DR_MISALIGNMENT (dr, 0);
return;
}
if (known_alignment_for_access_p (dr)
&& known_alignment_for_access_p (dr_peel))
{
int misal = DR_MISALIGNMENT (dr);
tree vectype = STMT_VINFO_VECTYPE (stmt_info);
misal += npeel * dr_size;
misal %= GET_MODE_SIZE (TYPE_MODE (vectype));
SET_DR_MISALIGNMENT (dr, misal);
return;
}
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "Setting misalignment to -1.");
SET_DR_MISALIGNMENT (dr, -1);
}
/* Function vect_verify_datarefs_alignment
Return TRUE if all data references in the loop can be
handled with respect to alignment. */
static bool
vect_verify_datarefs_alignment (loop_vec_info loop_vinfo)
{
VEC (data_reference_p, heap) *datarefs = LOOP_VINFO_DATAREFS (loop_vinfo);
struct data_reference *dr;
enum dr_alignment_support supportable_dr_alignment;
unsigned int i;
for (i = 0; VEC_iterate (data_reference_p, datarefs, i, dr); i++)
{
gimple stmt = DR_STMT (dr);
stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
/* For interleaving, only the alignment of the first access matters. */
if (STMT_VINFO_STRIDED_ACCESS (stmt_info)
&& DR_GROUP_FIRST_DR (stmt_info) != stmt)
continue;
supportable_dr_alignment = vect_supportable_dr_alignment (dr);
if (!supportable_dr_alignment)
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
{
if (DR_IS_READ (dr))
fprintf (vect_dump,
"not vectorized: unsupported unaligned load.");
else
fprintf (vect_dump,
"not vectorized: unsupported unaligned store.");
}
return false;
}
if (supportable_dr_alignment != dr_aligned
&& vect_print_dump_info (REPORT_ALIGNMENT))
fprintf (vect_dump, "Vectorizing an unaligned access.");
}
return true;
}
/* Function vector_alignment_reachable_p
Return true if vector alignment for DR is reachable by peeling
a few loop iterations. Return false otherwise. */
static bool
vector_alignment_reachable_p (struct data_reference *dr)
{
gimple stmt = DR_STMT (dr);
stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
tree vectype = STMT_VINFO_VECTYPE (stmt_info);
if (STMT_VINFO_STRIDED_ACCESS (stmt_info))
{
/* For interleaved access we peel only if number of iterations in
the prolog loop ({VF - misalignment}), is a multiple of the
number of the interleaved accesses. */
int elem_size, mis_in_elements;
int nelements = TYPE_VECTOR_SUBPARTS (vectype);
/* FORNOW: handle only known alignment. */
if (!known_alignment_for_access_p (dr))
return false;
elem_size = GET_MODE_SIZE (TYPE_MODE (vectype)) / nelements;
mis_in_elements = DR_MISALIGNMENT (dr) / elem_size;
if ((nelements - mis_in_elements) % DR_GROUP_SIZE (stmt_info))
return false;
}
/* If misalignment is known at the compile time then allow peeling
only if natural alignment is reachable through peeling. */
if (known_alignment_for_access_p (dr) && !aligned_access_p (dr))
{
HOST_WIDE_INT elmsize =
int_cst_value (TYPE_SIZE_UNIT (TREE_TYPE (vectype)));
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "data size =" HOST_WIDE_INT_PRINT_DEC, elmsize);
fprintf (vect_dump, ". misalignment = %d. ", DR_MISALIGNMENT (dr));
}
if (DR_MISALIGNMENT (dr) % elmsize)
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "data size does not divide the misalignment.\n");
return false;
}
}
if (!known_alignment_for_access_p (dr))
{
tree type = (TREE_TYPE (DR_REF (dr)));
tree ba = DR_BASE_OBJECT (dr);
bool is_packed = false;
if (ba)
is_packed = contains_packed_reference (ba);
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "Unknown misalignment, is_packed = %d",is_packed);
if (targetm.vectorize.vector_alignment_reachable (type, is_packed))
return true;
else
return false;
}
return true;
}
/* Function vect_enhance_data_refs_alignment
This pass will use loop versioning and loop peeling in order to enhance
the alignment of data references in the loop.
FOR NOW: we assume that whatever versioning/peeling takes place, only the
original loop is to be vectorized; Any other loops that are created by
the transformations performed in this pass - are not supposed to be
vectorized. This restriction will be relaxed.
This pass will require a cost model to guide it whether to apply peeling
or versioning or a combination of the two. For example, the scheme that
intel uses when given a loop with several memory accesses, is as follows:
choose one memory access ('p') which alignment you want to force by doing
peeling. Then, either (1) generate a loop in which 'p' is aligned and all
other accesses are not necessarily aligned, or (2) use loop versioning to
generate one loop in which all accesses are aligned, and another loop in
which only 'p' is necessarily aligned.
("Automatic Intra-Register Vectorization for the Intel Architecture",
Aart J.C. Bik, Milind Girkar, Paul M. Grey and Ximmin Tian, International
Journal of Parallel Programming, Vol. 30, No. 2, April 2002.)
Devising a cost model is the most critical aspect of this work. It will
guide us on which access to peel for, whether to use loop versioning, how
many versions to create, etc. The cost model will probably consist of
generic considerations as well as target specific considerations (on
powerpc for example, misaligned stores are more painful than misaligned
loads).
Here are the general steps involved in alignment enhancements:
-- original loop, before alignment analysis:
for (i=0; i<N; i++){
x = q[i]; # DR_MISALIGNMENT(q) = unknown
p[i] = y; # DR_MISALIGNMENT(p) = unknown
}
-- After vect_compute_data_refs_alignment:
for (i=0; i<N; i++){
x = q[i]; # DR_MISALIGNMENT(q) = 3
p[i] = y; # DR_MISALIGNMENT(p) = unknown
}
-- Possibility 1: we do loop versioning:
if (p is aligned) {
for (i=0; i<N; i++){ # loop 1A
x = q[i]; # DR_MISALIGNMENT(q) = 3
p[i] = y; # DR_MISALIGNMENT(p) = 0
}
}
else {
for (i=0; i<N; i++){ # loop 1B
x = q[i]; # DR_MISALIGNMENT(q) = 3
p[i] = y; # DR_MISALIGNMENT(p) = unaligned
}
}
-- Possibility 2: we do loop peeling:
for (i = 0; i < 3; i++){ # (scalar loop, not to be vectorized).
x = q[i];
p[i] = y;
}
for (i = 3; i < N; i++){ # loop 2A
x = q[i]; # DR_MISALIGNMENT(q) = 0
p[i] = y; # DR_MISALIGNMENT(p) = unknown
}
-- Possibility 3: combination of loop peeling and versioning:
for (i = 0; i < 3; i++){ # (scalar loop, not to be vectorized).
x = q[i];
p[i] = y;
}
if (p is aligned) {
for (i = 3; i<N; i++){ # loop 3A
x = q[i]; # DR_MISALIGNMENT(q) = 0
p[i] = y; # DR_MISALIGNMENT(p) = 0
}
}
else {
for (i = 3; i<N; i++){ # loop 3B
x = q[i]; # DR_MISALIGNMENT(q) = 0
p[i] = y; # DR_MISALIGNMENT(p) = unaligned
}
}
These loops are later passed to loop_transform to be vectorized. The
vectorizer will use the alignment information to guide the transformation
(whether to generate regular loads/stores, or with special handling for
misalignment). */
static bool
vect_enhance_data_refs_alignment (loop_vec_info loop_vinfo)
{
VEC (data_reference_p, heap) *datarefs = LOOP_VINFO_DATAREFS (loop_vinfo);
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
enum dr_alignment_support supportable_dr_alignment;
struct data_reference *dr0 = NULL;
struct data_reference *dr;
unsigned int i;
bool do_peeling = false;
bool do_versioning = false;
bool stat;
gimple stmt;
stmt_vec_info stmt_info;
int vect_versioning_for_alias_required;
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "=== vect_enhance_data_refs_alignment ===");
/* While cost model enhancements are expected in the future, the high level
view of the code at this time is as follows:
A) If there is a misaligned write then see if peeling to align this write
can make all data references satisfy vect_supportable_dr_alignment.
If so, update data structures as needed and return true. Note that
at this time vect_supportable_dr_alignment is known to return false
for a misaligned write.
B) If peeling wasn't possible and there is a data reference with an
unknown misalignment that does not satisfy vect_supportable_dr_alignment
then see if loop versioning checks can be used to make all data
references satisfy vect_supportable_dr_alignment. If so, update
data structures as needed and return true.
C) If neither peeling nor versioning were successful then return false if
any data reference does not satisfy vect_supportable_dr_alignment.
D) Return true (all data references satisfy vect_supportable_dr_alignment).
Note, Possibility 3 above (which is peeling and versioning together) is not
being done at this time. */
/* (1) Peeling to force alignment. */
/* (1.1) Decide whether to perform peeling, and how many iterations to peel:
Considerations:
+ How many accesses will become aligned due to the peeling
- How many accesses will become unaligned due to the peeling,
and the cost of misaligned accesses.
- The cost of peeling (the extra runtime checks, the increase
in code size).
The scheme we use FORNOW: peel to force the alignment of the first
misaligned store in the loop.
Rationale: misaligned stores are not yet supported.
TODO: Use a cost model. */
for (i = 0; VEC_iterate (data_reference_p, datarefs, i, dr); i++)
{
stmt = DR_STMT (dr);
stmt_info = vinfo_for_stmt (stmt);
/* For interleaving, only the alignment of the first access
matters. */
if (STMT_VINFO_STRIDED_ACCESS (stmt_info)
&& DR_GROUP_FIRST_DR (stmt_info) != stmt)
continue;
if (!DR_IS_READ (dr) && !aligned_access_p (dr))
{
do_peeling = vector_alignment_reachable_p (dr);
if (do_peeling)
dr0 = dr;
if (!do_peeling && vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "vector alignment may not be reachable");
break;
}
}
vect_versioning_for_alias_required =
(VEC_length (ddr_p, LOOP_VINFO_MAY_ALIAS_DDRS (loop_vinfo)) > 0);
/* Temporarily, if versioning for alias is required, we disable peeling
until we support peeling and versioning. Often peeling for alignment
will require peeling for loop-bound, which in turn requires that we
know how to adjust the loop ivs after the loop. */
if (vect_versioning_for_alias_required
|| !vect_can_advance_ivs_p (loop_vinfo)
|| !slpeel_can_duplicate_loop_p (loop, single_exit (loop)))
do_peeling = false;
if (do_peeling)
{
int mis;
int npeel = 0;
gimple stmt = DR_STMT (dr0);
stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
tree vectype = STMT_VINFO_VECTYPE (stmt_info);
int nelements = TYPE_VECTOR_SUBPARTS (vectype);
if (known_alignment_for_access_p (dr0))
{
/* Since it's known at compile time, compute the number of iterations
in the peeled loop (the peeling factor) for use in updating
DR_MISALIGNMENT values. The peeling factor is the vectorization
factor minus the misalignment as an element count. */
mis = DR_MISALIGNMENT (dr0);
mis /= GET_MODE_SIZE (TYPE_MODE (TREE_TYPE (DR_REF (dr0))));
npeel = nelements - mis;
/* For interleaved data access every iteration accesses all the
members of the group, therefore we divide the number of iterations
by the group size. */
stmt_info = vinfo_for_stmt (DR_STMT (dr0));
if (STMT_VINFO_STRIDED_ACCESS (stmt_info))
npeel /= DR_GROUP_SIZE (stmt_info);
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "Try peeling by %d", npeel);
}
/* Ensure that all data refs can be vectorized after the peel. */
for (i = 0; VEC_iterate (data_reference_p, datarefs, i, dr); i++)
{
int save_misalignment;
if (dr == dr0)
continue;
stmt = DR_STMT (dr);
stmt_info = vinfo_for_stmt (stmt);
/* For interleaving, only the alignment of the first access
matters. */
if (STMT_VINFO_STRIDED_ACCESS (stmt_info)
&& DR_GROUP_FIRST_DR (stmt_info) != stmt)
continue;
save_misalignment = DR_MISALIGNMENT (dr);
vect_update_misalignment_for_peel (dr, dr0, npeel);
supportable_dr_alignment = vect_supportable_dr_alignment (dr);
SET_DR_MISALIGNMENT (dr, save_misalignment);
if (!supportable_dr_alignment)
{
do_peeling = false;
break;
}
}
if (do_peeling)
{
/* (1.2) Update the DR_MISALIGNMENT of each data reference DR_i.
If the misalignment of DR_i is identical to that of dr0 then set
DR_MISALIGNMENT (DR_i) to zero. If the misalignment of DR_i and
dr0 are known at compile time then increment DR_MISALIGNMENT (DR_i)
by the peeling factor times the element size of DR_i (MOD the
vectorization factor times the size). Otherwise, the
misalignment of DR_i must be set to unknown. */
for (i = 0; VEC_iterate (data_reference_p, datarefs, i, dr); i++)
if (dr != dr0)
vect_update_misalignment_for_peel (dr, dr0, npeel);
LOOP_VINFO_UNALIGNED_DR (loop_vinfo) = dr0;
LOOP_PEELING_FOR_ALIGNMENT (loop_vinfo) = DR_MISALIGNMENT (dr0);
SET_DR_MISALIGNMENT (dr0, 0);
if (vect_print_dump_info (REPORT_ALIGNMENT))
fprintf (vect_dump, "Alignment of access forced using peeling.");
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "Peeling for alignment will be applied.");
stat = vect_verify_datarefs_alignment (loop_vinfo);
gcc_assert (stat);
return stat;
}
}
/* (2) Versioning to force alignment. */
/* Try versioning if:
1) flag_tree_vect_loop_version is TRUE
2) optimize loop for speed
3) there is at least one unsupported misaligned data ref with an unknown
misalignment, and
4) all misaligned data refs with a known misalignment are supported, and
5) the number of runtime alignment checks is within reason. */
do_versioning =
flag_tree_vect_loop_version
&& optimize_loop_nest_for_speed_p (loop)
&& (!loop->inner); /* FORNOW */
if (do_versioning)
{
for (i = 0; VEC_iterate (data_reference_p, datarefs, i, dr); i++)
{
stmt = DR_STMT (dr);
stmt_info = vinfo_for_stmt (stmt);
/* For interleaving, only the alignment of the first access
matters. */
if (aligned_access_p (dr)
|| (STMT_VINFO_STRIDED_ACCESS (stmt_info)
&& DR_GROUP_FIRST_DR (stmt_info) != stmt))
continue;
supportable_dr_alignment = vect_supportable_dr_alignment (dr);
if (!supportable_dr_alignment)
{
gimple stmt;
int mask;
tree vectype;
if (known_alignment_for_access_p (dr)
|| VEC_length (gimple,
LOOP_VINFO_MAY_MISALIGN_STMTS (loop_vinfo))
>= (unsigned) PARAM_VALUE (PARAM_VECT_MAX_VERSION_FOR_ALIGNMENT_CHECKS))
{
do_versioning = false;
break;
}
stmt = DR_STMT (dr);
vectype = STMT_VINFO_VECTYPE (vinfo_for_stmt (stmt));
gcc_assert (vectype);
/* The rightmost bits of an aligned address must be zeros.
Construct the mask needed for this test. For example,
GET_MODE_SIZE for the vector mode V4SI is 16 bytes so the
mask must be 15 = 0xf. */
mask = GET_MODE_SIZE (TYPE_MODE (vectype)) - 1;
/* FORNOW: use the same mask to test all potentially unaligned
references in the loop. The vectorizer currently supports
a single vector size, see the reference to
GET_MODE_NUNITS (TYPE_MODE (vectype)) where the
vectorization factor is computed. */
gcc_assert (!LOOP_VINFO_PTR_MASK (loop_vinfo)
|| LOOP_VINFO_PTR_MASK (loop_vinfo) == mask);
LOOP_VINFO_PTR_MASK (loop_vinfo) = mask;
VEC_safe_push (gimple, heap,
LOOP_VINFO_MAY_MISALIGN_STMTS (loop_vinfo),
DR_STMT (dr));
}
}
/* Versioning requires at least one misaligned data reference. */
if (VEC_length (gimple, LOOP_VINFO_MAY_MISALIGN_STMTS (loop_vinfo)) == 0)
do_versioning = false;
else if (!do_versioning)
VEC_truncate (gimple, LOOP_VINFO_MAY_MISALIGN_STMTS (loop_vinfo), 0);
}
if (do_versioning)
{
VEC(gimple,heap) *may_misalign_stmts
= LOOP_VINFO_MAY_MISALIGN_STMTS (loop_vinfo);
gimple stmt;
/* It can now be assumed that the data references in the statements
in LOOP_VINFO_MAY_MISALIGN_STMTS will be aligned in the version
of the loop being vectorized. */
for (i = 0; VEC_iterate (gimple, may_misalign_stmts, i, stmt); i++)
{
stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
dr = STMT_VINFO_DATA_REF (stmt_info);
SET_DR_MISALIGNMENT (dr, 0);
if (vect_print_dump_info (REPORT_ALIGNMENT))
fprintf (vect_dump, "Alignment of access forced using versioning.");
}
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "Versioning for alignment will be applied.");
/* Peeling and versioning can't be done together at this time. */
gcc_assert (! (do_peeling && do_versioning));
stat = vect_verify_datarefs_alignment (loop_vinfo);
gcc_assert (stat);
return stat;
}
/* This point is reached if neither peeling nor versioning is being done. */
gcc_assert (! (do_peeling || do_versioning));
stat = vect_verify_datarefs_alignment (loop_vinfo);
return stat;
}
/* Function vect_analyze_data_refs_alignment
Analyze the alignment of the data-references in the loop.
Return FALSE if a data reference is found that cannot be vectorized. */
static bool
vect_analyze_data_refs_alignment (loop_vec_info loop_vinfo)
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "=== vect_analyze_data_refs_alignment ===");
if (!vect_compute_data_refs_alignment (loop_vinfo))
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
fprintf (vect_dump,
"not vectorized: can't calculate alignment for data ref.");
return false;
}
return true;
}
/* Analyze groups of strided accesses: check that DR belongs to a group of
strided accesses of legal size, step, etc. Detect gaps, single element
interleaving, and other special cases. Set strided access info.
Collect groups of strided stores for further use in SLP analysis. */
static bool
vect_analyze_group_access (struct data_reference *dr)
{
tree step = DR_STEP (dr);
tree scalar_type = TREE_TYPE (DR_REF (dr));
HOST_WIDE_INT type_size = TREE_INT_CST_LOW (TYPE_SIZE_UNIT (scalar_type));
gimple stmt = DR_STMT (dr);
stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info);
HOST_WIDE_INT dr_step = TREE_INT_CST_LOW (step);
HOST_WIDE_INT stride;
bool slp_impossible = false;
/* For interleaving, STRIDE is STEP counted in elements, i.e., the size of the
interleaving group (including gaps). */
stride = dr_step / type_size;
/* Not consecutive access is possible only if it is a part of interleaving. */
if (!DR_GROUP_FIRST_DR (vinfo_for_stmt (stmt)))
{
/* Check if it this DR is a part of interleaving, and is a single
element of the group that is accessed in the loop. */
/* Gaps are supported only for loads. STEP must be a multiple of the type
size. The size of the group must be a power of 2. */
if (DR_IS_READ (dr)
&& (dr_step % type_size) == 0
&& stride > 0
&& exact_log2 (stride) != -1)
{
DR_GROUP_FIRST_DR (vinfo_for_stmt (stmt)) = stmt;
DR_GROUP_SIZE (vinfo_for_stmt (stmt)) = stride;
if (vect_print_dump_info (REPORT_DR_DETAILS))
{
fprintf (vect_dump, "Detected single element interleaving %d ",
DR_GROUP_SIZE (vinfo_for_stmt (stmt)));
print_generic_expr (vect_dump, DR_REF (dr), TDF_SLIM);
fprintf (vect_dump, " step ");
print_generic_expr (vect_dump, step, TDF_SLIM);
}
return true;
}
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "not consecutive access");
return false;
}
if (DR_GROUP_FIRST_DR (vinfo_for_stmt (stmt)) == stmt)
{
/* First stmt in the interleaving chain. Check the chain. */
gimple next = DR_GROUP_NEXT_DR (vinfo_for_stmt (stmt));
struct data_reference *data_ref = dr;
unsigned int count = 1;
tree next_step;
tree prev_init = DR_INIT (data_ref);
gimple prev = stmt;
HOST_WIDE_INT diff, count_in_bytes, gaps = 0;
while (next)
{
/* Skip same data-refs. In case that two or more stmts share data-ref
(supported only for loads), we vectorize only the first stmt, and
the rest get their vectorized loads from the first one. */
if (!tree_int_cst_compare (DR_INIT (data_ref),
DR_INIT (STMT_VINFO_DATA_REF (
vinfo_for_stmt (next)))))
{
if (!DR_IS_READ (data_ref))
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "Two store stmts share the same dr.");
return false;
}
/* Check that there is no load-store dependencies for this loads
to prevent a case of load-store-load to the same location. */
if (DR_GROUP_READ_WRITE_DEPENDENCE (vinfo_for_stmt (next))
|| DR_GROUP_READ_WRITE_DEPENDENCE (vinfo_for_stmt (prev)))
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump,
"READ_WRITE dependence in interleaving.");
return false;
}
/* For load use the same data-ref load. */
DR_GROUP_SAME_DR_STMT (vinfo_for_stmt (next)) = prev;
prev = next;
next = DR_GROUP_NEXT_DR (vinfo_for_stmt (next));
continue;
}
prev = next;
/* Check that all the accesses have the same STEP. */
next_step = DR_STEP (STMT_VINFO_DATA_REF (vinfo_for_stmt (next)));
if (tree_int_cst_compare (step, next_step))
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "not consecutive access in interleaving");
return false;
}
data_ref = STMT_VINFO_DATA_REF (vinfo_for_stmt (next));
/* Check that the distance between two accesses is equal to the type
size. Otherwise, we have gaps. */
diff = (TREE_INT_CST_LOW (DR_INIT (data_ref))
- TREE_INT_CST_LOW (prev_init)) / type_size;
if (diff != 1)
{
/* FORNOW: SLP of accesses with gaps is not supported. */
slp_impossible = true;
if (!DR_IS_READ (data_ref))
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "interleaved store with gaps");
return false;
}
gaps += diff - 1;
}
/* Store the gap from the previous member of the group. If there is no
gap in the access, DR_GROUP_GAP is always 1. */
DR_GROUP_GAP (vinfo_for_stmt (next)) = diff;
prev_init = DR_INIT (data_ref);
next = DR_GROUP_NEXT_DR (vinfo_for_stmt (next));
/* Count the number of data-refs in the chain. */
count++;
}
/* COUNT is the number of accesses found, we multiply it by the size of
the type to get COUNT_IN_BYTES. */
count_in_bytes = type_size * count;
/* Check that the size of the interleaving (including gaps) is not greater
than STEP. */
if (dr_step && dr_step < count_in_bytes + gaps * type_size)
{
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "interleaving size is greater than step for ");
print_generic_expr (vect_dump, DR_REF (dr), TDF_SLIM);
}
return false;
}
/* Check that the size of the interleaving is equal to STEP for stores,
i.e., that there are no gaps. */
if (dr_step != count_in_bytes)
{
if (DR_IS_READ (dr))
{
slp_impossible = true;
/* There is a gap after the last load in the group. This gap is a
difference between the stride and the number of elements. When
there is no gap, this difference should be 0. */
DR_GROUP_GAP (vinfo_for_stmt (stmt)) = stride - count;
}
else
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "interleaved store with gaps");
return false;
}
}
/* Check that STEP is a multiple of type size. */
if ((dr_step % type_size) != 0)
{
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "step is not a multiple of type size: step ");
print_generic_expr (vect_dump, step, TDF_SLIM);
fprintf (vect_dump, " size ");
print_generic_expr (vect_dump, TYPE_SIZE_UNIT (scalar_type),
TDF_SLIM);
}
return false;
}
/* FORNOW: we handle only interleaving that is a power of 2.
We don't fail here if it may be still possible to vectorize the
group using SLP. If not, the size of the group will be checked in
vect_analyze_operations, and the vectorization will fail. */
if (exact_log2 (stride) == -1)
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "interleaving is not a power of 2");
if (slp_impossible)
return false;
}
DR_GROUP_SIZE (vinfo_for_stmt (stmt)) = stride;
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "Detected interleaving of size %d", (int)stride);
/* SLP: create an SLP data structure for every interleaving group of
stores for further analysis in vect_analyse_slp. */
if (!DR_IS_READ (dr) && !slp_impossible)
VEC_safe_push (gimple, heap, LOOP_VINFO_STRIDED_STORES (loop_vinfo), stmt);
}
return true;
}
/* Analyze the access pattern of the data-reference DR.
In case of non-consecutive accesses call vect_analyze_group_access() to
analyze groups of strided accesses. */
static bool
vect_analyze_data_ref_access (struct data_reference *dr)
{
tree step = DR_STEP (dr);
tree scalar_type = TREE_TYPE (DR_REF (dr));
gimple stmt = DR_STMT (dr);
stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info);
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
HOST_WIDE_INT dr_step = TREE_INT_CST_LOW (step);
if (!step)
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "bad data-ref access");
return false;
}
/* Don't allow invariant accesses. */
if (dr_step == 0)
return false;
if (nested_in_vect_loop_p (loop, stmt))
{
/* Interleaved accesses are not yet supported within outer-loop
vectorization for references in the inner-loop. */
DR_GROUP_FIRST_DR (vinfo_for_stmt (stmt)) = NULL;
/* For the rest of the analysis we use the outer-loop step. */
step = STMT_VINFO_DR_STEP (stmt_info);
dr_step = TREE_INT_CST_LOW (step);
if (dr_step == 0)
{
if (vect_print_dump_info (REPORT_ALIGNMENT))
fprintf (vect_dump, "zero step in outer loop.");
if (DR_IS_READ (dr))
return true;
else
return false;
}
}
/* Consecutive? */
if (!tree_int_cst_compare (step, TYPE_SIZE_UNIT (scalar_type)))
{
/* Mark that it is not interleaving. */
DR_GROUP_FIRST_DR (vinfo_for_stmt (stmt)) = NULL;
return true;
}
if (nested_in_vect_loop_p (loop, stmt))
{
if (vect_print_dump_info (REPORT_ALIGNMENT))
fprintf (vect_dump, "strided access in outer loop.");
return false;
}
/* Not consecutive access - check if it's a part of interleaving group. */
return vect_analyze_group_access (dr);
}
/* Function vect_analyze_data_ref_accesses.
Analyze the access pattern of all the data references in the loop.
FORNOW: the only access pattern that is considered vectorizable is a
simple step 1 (consecutive) access.
FORNOW: handle only arrays and pointer accesses. */
static bool
vect_analyze_data_ref_accesses (loop_vec_info loop_vinfo)
{
unsigned int i;
VEC (data_reference_p, heap) *datarefs = LOOP_VINFO_DATAREFS (loop_vinfo);
struct data_reference *dr;
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "=== vect_analyze_data_ref_accesses ===");
for (i = 0; VEC_iterate (data_reference_p, datarefs, i, dr); i++)
if (!vect_analyze_data_ref_access (dr))
{
if (vect_print_dump_info (REPORT_UNVECTORIZED_LOOPS))
fprintf (vect_dump, "not vectorized: complicated access pattern.");
return false;
}
return true;
}
/* Function vect_prune_runtime_alias_test_list.
Prune a list of ddrs to be tested at run-time by versioning for alias.
Return FALSE if resulting list of ddrs is longer then allowed by
PARAM_VECT_MAX_VERSION_FOR_ALIAS_CHECKS, otherwise return TRUE. */
static bool
vect_prune_runtime_alias_test_list (loop_vec_info loop_vinfo)
{
VEC (ddr_p, heap) * ddrs =
LOOP_VINFO_MAY_ALIAS_DDRS (loop_vinfo);
unsigned i, j;
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "=== vect_prune_runtime_alias_test_list ===");
for (i = 0; i < VEC_length (ddr_p, ddrs); )
{
bool found;
ddr_p ddr_i;
ddr_i = VEC_index (ddr_p, ddrs, i);
found = false;
for (j = 0; j < i; j++)
{
ddr_p ddr_j = VEC_index (ddr_p, ddrs, j);
if (vect_vfa_range_equal (ddr_i, ddr_j))
{
if (vect_print_dump_info (REPORT_DR_DETAILS))
{
fprintf (vect_dump, "found equal ranges ");
print_generic_expr (vect_dump, DR_REF (DDR_A (ddr_i)), TDF_SLIM);
fprintf (vect_dump, ", ");
print_generic_expr (vect_dump, DR_REF (DDR_B (ddr_i)), TDF_SLIM);
fprintf (vect_dump, " and ");
print_generic_expr (vect_dump, DR_REF (DDR_A (ddr_j)), TDF_SLIM);
fprintf (vect_dump, ", ");
print_generic_expr (vect_dump, DR_REF (DDR_B (ddr_j)), TDF_SLIM);
}
found = true;
break;
}
}
if (found)
{
VEC_ordered_remove (ddr_p, ddrs, i);
continue;
}
i++;
}
if (VEC_length (ddr_p, ddrs) >
(unsigned) PARAM_VALUE (PARAM_VECT_MAX_VERSION_FOR_ALIAS_CHECKS))
{
if (vect_print_dump_info (REPORT_DR_DETAILS))
{
fprintf (vect_dump,
"disable versioning for alias - max number of generated "
"checks exceeded.");
}
VEC_truncate (ddr_p, LOOP_VINFO_MAY_ALIAS_DDRS (loop_vinfo), 0);
return false;
}
return true;
}
/* Recursively free the memory allocated for the SLP tree rooted at NODE. */
static void
vect_free_slp_tree (slp_tree node)
{
if (!node)
return;
if (SLP_TREE_LEFT (node))
vect_free_slp_tree (SLP_TREE_LEFT (node));
if (SLP_TREE_RIGHT (node))
vect_free_slp_tree (SLP_TREE_RIGHT (node));
VEC_free (gimple, heap, SLP_TREE_SCALAR_STMTS (node));
if (SLP_TREE_VEC_STMTS (node))
VEC_free (gimple, heap, SLP_TREE_VEC_STMTS (node));
free (node);
}
/* Free the memory allocated for the SLP instance. */
void
vect_free_slp_instance (slp_instance instance)
{
vect_free_slp_tree (SLP_INSTANCE_TREE (instance));
VEC_free (int, heap, SLP_INSTANCE_LOAD_PERMUTATION (instance));
VEC_free (slp_tree, heap, SLP_INSTANCE_LOADS (instance));
}
/* Get the defs for the rhs of STMT (collect them in DEF_STMTS0/1), check that
they are of a legal type and that they match the defs of the first stmt of
the SLP group (stored in FIRST_STMT_...). */
static bool
vect_get_and_check_slp_defs (loop_vec_info loop_vinfo, slp_tree slp_node,
gimple stmt, VEC (gimple, heap) **def_stmts0,
VEC (gimple, heap) **def_stmts1,
enum vect_def_type *first_stmt_dt0,
enum vect_def_type *first_stmt_dt1,
tree *first_stmt_def0_type,
tree *first_stmt_def1_type,
tree *first_stmt_const_oprnd,
int ncopies_for_cost,
bool *pattern0, bool *pattern1)
{
tree oprnd;
unsigned int i, number_of_oprnds;
tree def;
gimple def_stmt;
enum vect_def_type dt[2] = {vect_unknown_def_type, vect_unknown_def_type};
stmt_vec_info stmt_info =
vinfo_for_stmt (VEC_index (gimple, SLP_TREE_SCALAR_STMTS (slp_node), 0));
enum gimple_rhs_class rhs_class;
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
rhs_class = get_gimple_rhs_class (gimple_assign_rhs_code (stmt));
number_of_oprnds = gimple_num_ops (stmt) - 1; /* RHS only */
for (i = 0; i < number_of_oprnds; i++)
{
oprnd = gimple_op (stmt, i + 1);
if (!vect_is_simple_use (oprnd, loop_vinfo, &def_stmt, &def, &dt[i])
|| (!def_stmt && dt[i] != vect_constant_def))
{
if (vect_print_dump_info (REPORT_SLP))
{
fprintf (vect_dump, "Build SLP failed: can't find def for ");
print_generic_expr (vect_dump, oprnd, TDF_SLIM);
}
return false;
}
/* Check if DEF_STMT is a part of a pattern and get the def stmt from
the pattern. Check that all the stmts of the node are in the
pattern. */
if (def_stmt && gimple_bb (def_stmt)
&& flow_bb_inside_loop_p (loop, gimple_bb (def_stmt))
&& vinfo_for_stmt (def_stmt)
&& STMT_VINFO_IN_PATTERN_P (vinfo_for_stmt (def_stmt)))
{
if (!*first_stmt_dt0)
*pattern0 = true;
else
{
if (i == 1 && !*first_stmt_dt1)
*pattern1 = true;
else if ((i == 0 && !*pattern0) || (i == 1 && !*pattern1))
{
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "Build SLP failed: some of the stmts"
" are in a pattern, and others are not ");
print_generic_expr (vect_dump, oprnd, TDF_SLIM);
}
return false;
}
}
def_stmt = STMT_VINFO_RELATED_STMT (vinfo_for_stmt (def_stmt));
dt[i] = STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_stmt));
if (*dt == vect_unknown_def_type)
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "Unsupported pattern.");
return false;
}
switch (gimple_code (def_stmt))
{
case GIMPLE_PHI:
def = gimple_phi_result (def_stmt);
break;
case GIMPLE_ASSIGN:
def = gimple_assign_lhs (def_stmt);
break;
default:
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "unsupported defining stmt: ");
return false;
}
}
if (!*first_stmt_dt0)
{
/* op0 of the first stmt of the group - store its info. */
*first_stmt_dt0 = dt[i];
if (def)
*first_stmt_def0_type = TREE_TYPE (def);
else
*first_stmt_const_oprnd = oprnd;
/* Analyze costs (for the first stmt of the group only). */
if (rhs_class != GIMPLE_SINGLE_RHS)
/* Not memory operation (we don't call this functions for loads). */
vect_model_simple_cost (stmt_info, ncopies_for_cost, dt, slp_node);
else
/* Store. */
vect_model_store_cost (stmt_info, ncopies_for_cost, dt[0], slp_node);
}
else
{
if (!*first_stmt_dt1 && i == 1)
{
/* op1 of the first stmt of the group - store its info. */
*first_stmt_dt1 = dt[i];
if (def)
*first_stmt_def1_type = TREE_TYPE (def);
else
{
/* We assume that the stmt contains only one constant
operand. We fail otherwise, to be on the safe side. */
if (*first_stmt_const_oprnd)
{
if (vect_print_dump_info (REPORT_SLP))
fprintf (vect_dump, "Build SLP failed: two constant "
"oprnds in stmt");
return false;
}
*first_stmt_const_oprnd = oprnd;
}
}
else
{
/* Not first stmt of the group, check that the def-stmt/s match
the def-stmt/s of the first stmt. */
if ((i == 0
&& (*first_stmt_dt0 != dt[i]
|| (*first_stmt_def0_type && def
&& *first_stmt_def0_type != TREE_TYPE (def))))
|| (i == 1
&& (*first_stmt_dt1 != dt[i]
|| (*first_stmt_def1_type && def
&& *first_stmt_def1_type != TREE_TYPE (def))))
|| (!def
&& TREE_TYPE (*first_stmt_const_oprnd)
!= TREE_TYPE (oprnd)))
{
if (vect_print_dump_info (REPORT_SLP))
fprintf (vect_dump, "Build SLP failed: different types ");
return false;
}
}
}
/* Check the types of the definitions. */
switch (dt[i])
{
case vect_constant_def:
case vect_invariant_def:
break;
case vect_loop_def:
if (i == 0)
VEC_safe_push (gimple, heap, *def_stmts0, def_stmt);
else
VEC_safe_push (gimple, heap, *def_stmts1, def_stmt);
break;
default:
/* FORNOW: Not supported. */
if (vect_print_dump_info (REPORT_SLP))
{
fprintf (vect_dump, "Build SLP failed: illegal type of def ");
print_generic_expr (vect_dump, def, TDF_SLIM);
}
return false;
}
}
return true;
}
/* Recursively build an SLP tree starting from NODE.
Fail (and return FALSE) if def-stmts are not isomorphic, require data
permutation or are of unsupported types of operation. Otherwise, return
TRUE. */
static bool
vect_build_slp_tree (loop_vec_info loop_vinfo, slp_tree *node,
unsigned int group_size,
int *inside_cost, int *outside_cost,
int ncopies_for_cost, unsigned int *max_nunits,
VEC (int, heap) **load_permutation,
VEC (slp_tree, heap) **loads)
{
VEC (gimple, heap) *def_stmts0 = VEC_alloc (gimple, heap, group_size);
VEC (gimple, heap) *def_stmts1 = VEC_alloc (gimple, heap, group_size);
unsigned int i;
VEC (gimple, heap) *stmts = SLP_TREE_SCALAR_STMTS (*node);
gimple stmt = VEC_index (gimple, stmts, 0);
enum vect_def_type first_stmt_dt0 = 0, first_stmt_dt1 = 0;
enum tree_code first_stmt_code = 0, rhs_code;
tree first_stmt_def1_type = NULL_TREE, first_stmt_def0_type = NULL_TREE;
tree lhs;
bool stop_recursion = false, need_same_oprnds = false;
tree vectype, scalar_type, first_op1 = NULL_TREE;
unsigned int vectorization_factor = 0, ncopies;
optab optab;
int icode;
enum machine_mode optab_op2_mode;
enum machine_mode vec_mode;
tree first_stmt_const_oprnd = NULL_TREE;
struct data_reference *first_dr;
bool pattern0 = false, pattern1 = false;
HOST_WIDE_INT dummy;
bool permutation = false;
unsigned int load_place;
gimple first_load;
/* For every stmt in NODE find its def stmt/s. */
for (i = 0; VEC_iterate (gimple, stmts, i, stmt); i++)
{
if (vect_print_dump_info (REPORT_SLP))
{
fprintf (vect_dump, "Build SLP for ");
print_gimple_stmt (vect_dump, stmt, 0, TDF_SLIM);
}
lhs = gimple_get_lhs (stmt);
if (lhs == NULL_TREE)
{
if (vect_print_dump_info (REPORT_SLP))
{
fprintf (vect_dump,
"Build SLP failed: not GIMPLE_ASSIGN nor GIMPLE_CALL");
print_gimple_stmt (vect_dump, stmt, 0, TDF_SLIM);
}
return false;
}
scalar_type = vect_get_smallest_scalar_type (stmt, &dummy, &dummy);
vectype = get_vectype_for_scalar_type (scalar_type);
if (!vectype)
{
if (vect_print_dump_info (REPORT_SLP))
{
fprintf (vect_dump, "Build SLP failed: unsupported data-type ");
print_generic_expr (vect_dump, scalar_type, TDF_SLIM);
}
return false;
}
gcc_assert (LOOP_VINFO_VECT_FACTOR (loop_vinfo));
vectorization_factor = LOOP_VINFO_VECT_FACTOR (loop_vinfo);
ncopies = vectorization_factor / TYPE_VECTOR_SUBPARTS (vectype);
if (ncopies > 1 && vect_print_dump_info (REPORT_SLP))
fprintf (vect_dump, "SLP with multiple types ");
/* In case of multiple types we need to detect the smallest type. */
if (*max_nunits < TYPE_VECTOR_SUBPARTS (vectype))
*max_nunits = TYPE_VECTOR_SUBPARTS (vectype);
if (is_gimple_call (stmt))
rhs_code = CALL_EXPR;
else
rhs_code = gimple_assign_rhs_code (stmt);
/* Check the operation. */
if (i == 0)
{
first_stmt_code = rhs_code;
/* Shift arguments should be equal in all the packed stmts for a
vector shift with scalar shift operand. */
if (rhs_code == LSHIFT_EXPR || rhs_code == RSHIFT_EXPR
|| rhs_code == LROTATE_EXPR
|| rhs_code == RROTATE_EXPR)
{
vec_mode = TYPE_MODE (vectype);
/* First see if we have a vector/vector shift. */
optab = optab_for_tree_code (rhs_code, vectype,
optab_vector);
if (!optab
|| (optab->handlers[(int) vec_mode].insn_code
== CODE_FOR_nothing))
{
/* No vector/vector shift, try for a vector/scalar shift. */
optab = optab_for_tree_code (rhs_code, vectype,
optab_scalar);
if (!optab)
{
if (vect_print_dump_info (REPORT_SLP))
fprintf (vect_dump, "Build SLP failed: no optab.");
return false;
}
icode = (int) optab->handlers[(int) vec_mode].insn_code;
if (icode == CODE_FOR_nothing)
{
if (vect_print_dump_info (REPORT_SLP))
fprintf (vect_dump, "Build SLP failed: "