| /* Definitions for data structures and routines for the regular |
| expression library, version 0.12. |
| |
| Copyright (C) 1985, 1989, 1990, 1991, 1992, 1993, 1995, 1996, 1997, |
| 1998, 2000, 2005 Free Software Foundation, Inc. |
| |
| This file is part of the GNU C Library. Its master source is NOT part of |
| the C library, however. The master source lives in /gd/gnu/lib. |
| |
| The GNU C Library is free software; you can redistribute it and/or |
| modify it under the terms of the GNU Lesser General Public |
| License as published by the Free Software Foundation; either |
| version 2.1 of the License, or (at your option) any later version. |
| |
| The GNU C Library is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| Lesser General Public License for more details. |
| |
| You should have received a copy of the GNU Lesser General Public |
| License along with the GNU C Library; if not, write to the Free |
| Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| 02110-1301 USA. */ |
| |
| #ifndef _REGEX_H |
| #define _REGEX_H 1 |
| |
| /* Allow the use in C++ code. */ |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* POSIX says that <sys/types.h> must be included (by the caller) before |
| <regex.h>. */ |
| |
| #if !defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE && defined VMS |
| /* VMS doesn't have `size_t' in <sys/types.h>, even though POSIX says it |
| should be there. */ |
| # include <stddef.h> |
| #endif |
| |
| /* The following two types have to be signed and unsigned integer type |
| wide enough to hold a value of a pointer. For most ANSI compilers |
| ptrdiff_t and size_t should be likely OK. Still size of these two |
| types is 2 for Microsoft C. Ugh... */ |
| typedef long int s_reg_t; |
| typedef unsigned long int active_reg_t; |
| |
| /* The following bits are used to determine the regexp syntax we |
| recognize. The set/not-set meanings are chosen so that Emacs syntax |
| remains the value 0. The bits are given in alphabetical order, and |
| the definitions shifted by one from the previous bit; thus, when we |
| add or remove a bit, only one other definition need change. */ |
| typedef unsigned long int reg_syntax_t; |
| |
| /* If this bit is not set, then \ inside a bracket expression is literal. |
| If set, then such a \ quotes the following character. */ |
| #define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1) |
| |
| /* If this bit is not set, then + and ? are operators, and \+ and \? are |
| literals. |
| If set, then \+ and \? are operators and + and ? are literals. */ |
| #define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1) |
| |
| /* If this bit is set, then character classes are supported. They are: |
| [:alpha:], [:upper:], [:lower:], [:digit:], [:alnum:], [:xdigit:], |
| [:space:], [:print:], [:punct:], [:graph:], and [:cntrl:]. |
| If not set, then character classes are not supported. */ |
| #define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1) |
| |
| /* If this bit is set, then ^ and $ are always anchors (outside bracket |
| expressions, of course). |
| If this bit is not set, then it depends: |
| ^ is an anchor if it is at the beginning of a regular |
| expression or after an open-group or an alternation operator; |
| $ is an anchor if it is at the end of a regular expression, or |
| before a close-group or an alternation operator. |
| |
| This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because |
| POSIX draft 11.2 says that * etc. in leading positions is undefined. |
| We already implemented a previous draft which made those constructs |
| invalid, though, so we haven't changed the code back. */ |
| #define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1) |
| |
| /* If this bit is set, then special characters are always special |
| regardless of where they are in the pattern. |
| If this bit is not set, then special characters are special only in |
| some contexts; otherwise they are ordinary. Specifically, |
| * + ? and intervals are only special when not after the beginning, |
| open-group, or alternation operator. */ |
| #define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1) |
| |
| /* If this bit is set, then *, +, ?, and { cannot be first in an re or |
| immediately after an alternation or begin-group operator. */ |
| #define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1) |
| |
| /* If this bit is set, then . matches newline. |
| If not set, then it doesn't. */ |
| #define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1) |
| |
| /* If this bit is set, then . doesn't match NUL. |
| If not set, then it does. */ |
| #define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1) |
| |
| /* If this bit is set, nonmatching lists [^...] do not match newline. |
| If not set, they do. */ |
| #define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1) |
| |
| /* If this bit is set, either \{...\} or {...} defines an |
| interval, depending on RE_NO_BK_BRACES. |
| If not set, \{, \}, {, and } are literals. */ |
| #define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1) |
| |
| /* If this bit is set, +, ? and | aren't recognized as operators. |
| If not set, they are. */ |
| #define RE_LIMITED_OPS (RE_INTERVALS << 1) |
| |
| /* If this bit is set, newline is an alternation operator. |
| If not set, newline is literal. */ |
| #define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1) |
| |
| /* If this bit is set, then `{...}' defines an interval, and \{ and \} |
| are literals. |
| If not set, then `\{...\}' defines an interval. */ |
| #define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1) |
| |
| /* If this bit is set, (...) defines a group, and \( and \) are literals. |
| If not set, \(...\) defines a group, and ( and ) are literals. */ |
| #define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1) |
| |
| /* If this bit is set, then \<digit> matches <digit>. |
| If not set, then \<digit> is a back-reference. */ |
| #define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1) |
| |
| /* If this bit is set, then | is an alternation operator, and \| is literal. |
| If not set, then \| is an alternation operator, and | is literal. */ |
| #define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1) |
| |
| /* If this bit is set, then an ending range point collating higher |
| than the starting range point, as in [z-a], is invalid. |
| If not set, then when ending range point collates higher than the |
| starting range point, the range is ignored. */ |
| #define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1) |
| |
| /* If this bit is set, then an unmatched ) is ordinary. |
| If not set, then an unmatched ) is invalid. */ |
| #define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1) |
| |
| /* If this bit is set, succeed as soon as we match the whole pattern, |
| without further backtracking. */ |
| #define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1) |
| |
| /* If this bit is set, do not process the GNU regex operators. |
| If not set, then the GNU regex operators are recognized. */ |
| #define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1) |
| |
| /* If this bit is set, turn on internal regex debugging. |
| If not set, and debugging was on, turn it off. |
| This only works if regex.c is compiled -DDEBUG. |
| We define this bit always, so that all that's needed to turn on |
| debugging is to recompile regex.c; the calling code can always have |
| this bit set, and it won't affect anything in the normal case. */ |
| #define RE_DEBUG (RE_NO_GNU_OPS << 1) |
| |
| /* If this bit is set, a syntactically invalid interval is treated as |
| a string of ordinary characters. For example, the ERE 'a{1' is |
| treated as 'a\{1'. */ |
| #define RE_INVALID_INTERVAL_ORD (RE_DEBUG << 1) |
| |
| /* This global variable defines the particular regexp syntax to use (for |
| some interfaces). When a regexp is compiled, the syntax used is |
| stored in the pattern buffer, so changing this does not affect |
| already-compiled regexps. */ |
| extern reg_syntax_t re_syntax_options; |
| |
| /* Define combinations of the above bits for the standard possibilities. |
| (The [[[ comments delimit what gets put into the Texinfo file, so |
| don't delete them!) */ |
| /* [[[begin syntaxes]]] */ |
| #define RE_SYNTAX_EMACS 0 |
| |
| #define RE_SYNTAX_AWK \ |
| (RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DOT_NOT_NULL \ |
| | RE_NO_BK_PARENS | RE_NO_BK_REFS \ |
| | RE_NO_BK_VBAR | RE_NO_EMPTY_RANGES \ |
| | RE_DOT_NEWLINE | RE_CONTEXT_INDEP_ANCHORS \ |
| | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS) |
| |
| #define RE_SYNTAX_GNU_AWK \ |
| ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG) \ |
| & ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS)) |
| |
| #define RE_SYNTAX_POSIX_AWK \ |
| (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS \ |
| | RE_INTERVALS | RE_NO_GNU_OPS) |
| |
| #define RE_SYNTAX_GREP \ |
| (RE_BK_PLUS_QM | RE_CHAR_CLASSES \ |
| | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS \ |
| | RE_NEWLINE_ALT) |
| |
| #define RE_SYNTAX_EGREP \ |
| (RE_CHAR_CLASSES | RE_CONTEXT_INDEP_ANCHORS \ |
| | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE \ |
| | RE_NEWLINE_ALT | RE_NO_BK_PARENS \ |
| | RE_NO_BK_VBAR) |
| |
| #define RE_SYNTAX_POSIX_EGREP \ |
| (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES \ |
| | RE_INVALID_INTERVAL_ORD) |
| |
| /* P1003.2/D11.2, section 4.20.7.1, lines 5078ff. */ |
| #define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC |
| |
| #define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC |
| |
| /* Syntax bits common to both basic and extended POSIX regex syntax. */ |
| #define _RE_SYNTAX_POSIX_COMMON \ |
| (RE_CHAR_CLASSES | RE_DOT_NEWLINE | RE_DOT_NOT_NULL \ |
| | RE_INTERVALS | RE_NO_EMPTY_RANGES) |
| |
| #define RE_SYNTAX_POSIX_BASIC \ |
| (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM) |
| |
| /* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes |
| RE_LIMITED_OPS, i.e., \? \+ \| are not recognized. Actually, this |
| isn't minimal, since other operators, such as \`, aren't disabled. */ |
| #define RE_SYNTAX_POSIX_MINIMAL_BASIC \ |
| (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS) |
| |
| #define RE_SYNTAX_POSIX_EXTENDED \ |
| (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \ |
| | RE_CONTEXT_INDEP_OPS | RE_NO_BK_BRACES \ |
| | RE_NO_BK_PARENS | RE_NO_BK_VBAR \ |
| | RE_CONTEXT_INVALID_OPS | RE_UNMATCHED_RIGHT_PAREN_ORD) |
| |
| /* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INDEP_OPS is |
| removed and RE_NO_BK_REFS is added. */ |
| #define RE_SYNTAX_POSIX_MINIMAL_EXTENDED \ |
| (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \ |
| | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES \ |
| | RE_NO_BK_PARENS | RE_NO_BK_REFS \ |
| | RE_NO_BK_VBAR | RE_UNMATCHED_RIGHT_PAREN_ORD) |
| /* [[[end syntaxes]]] */ |
| |
| /* Maximum number of duplicates an interval can allow. Some systems |
| (erroneously) define this in other header files, but we want our |
| value, so remove any previous define. */ |
| #ifdef RE_DUP_MAX |
| # undef RE_DUP_MAX |
| #endif |
| /* If sizeof(int) == 2, then ((1 << 15) - 1) overflows. */ |
| #define RE_DUP_MAX (0x7fff) |
| |
| |
| /* POSIX `cflags' bits (i.e., information for `regcomp'). */ |
| |
| /* If this bit is set, then use extended regular expression syntax. |
| If not set, then use basic regular expression syntax. */ |
| #define REG_EXTENDED 1 |
| |
| /* If this bit is set, then ignore case when matching. |
| If not set, then case is significant. */ |
| #define REG_ICASE (REG_EXTENDED << 1) |
| |
| /* If this bit is set, then anchors do not match at newline |
| characters in the string. |
| If not set, then anchors do match at newlines. */ |
| #define REG_NEWLINE (REG_ICASE << 1) |
| |
| /* If this bit is set, then report only success or fail in regexec. |
| If not set, then returns differ between not matching and errors. */ |
| #define REG_NOSUB (REG_NEWLINE << 1) |
| |
| |
| /* POSIX `eflags' bits (i.e., information for regexec). */ |
| |
| /* If this bit is set, then the beginning-of-line operator doesn't match |
| the beginning of the string (presumably because it's not the |
| beginning of a line). |
| If not set, then the beginning-of-line operator does match the |
| beginning of the string. */ |
| #define REG_NOTBOL 1 |
| |
| /* Like REG_NOTBOL, except for the end-of-line. */ |
| #define REG_NOTEOL (1 << 1) |
| |
| |
| /* If any error codes are removed, changed, or added, update the |
| `re_error_msg' table in regex.c. */ |
| typedef enum |
| { |
| #ifdef _XOPEN_SOURCE |
| REG_ENOSYS = -1, /* This will never happen for this implementation. */ |
| #endif |
| |
| REG_NOERROR = 0, /* Success. */ |
| REG_NOMATCH, /* Didn't find a match (for regexec). */ |
| |
| /* POSIX regcomp return error codes. (In the order listed in the |
| standard.) */ |
| REG_BADPAT, /* Invalid pattern. */ |
| REG_ECOLLATE, /* Not implemented. */ |
| REG_ECTYPE, /* Invalid character class name. */ |
| REG_EESCAPE, /* Trailing backslash. */ |
| REG_ESUBREG, /* Invalid back reference. */ |
| REG_EBRACK, /* Unmatched left bracket. */ |
| REG_EPAREN, /* Parenthesis imbalance. */ |
| REG_EBRACE, /* Unmatched \{. */ |
| REG_BADBR, /* Invalid contents of \{\}. */ |
| REG_ERANGE, /* Invalid range end. */ |
| REG_ESPACE, /* Ran out of memory. */ |
| REG_BADRPT, /* No preceding re for repetition op. */ |
| |
| /* Error codes we've added. */ |
| REG_EEND, /* Premature end. */ |
| REG_ESIZE, /* Compiled pattern bigger than 2^16 bytes. */ |
| REG_ERPAREN /* Unmatched ) or \); not returned from regcomp. */ |
| } reg_errcode_t; |
| |
| /* This data structure represents a compiled pattern. Before calling |
| the pattern compiler, the fields `buffer', `allocated', `fastmap', |
| `translate', and `no_sub' can be set. After the pattern has been |
| compiled, the `re_nsub' field is available. All other fields are |
| private to the regex routines. */ |
| |
| #ifndef RE_TRANSLATE_TYPE |
| # define RE_TRANSLATE_TYPE char * |
| #endif |
| |
| struct re_pattern_buffer |
| { |
| /* [[[begin pattern_buffer]]] */ |
| /* Space that holds the compiled pattern. It is declared as |
| `unsigned char *' because its elements are |
| sometimes used as array indexes. */ |
| unsigned char *buffer; |
| |
| /* Number of bytes to which `buffer' points. */ |
| unsigned long int allocated; |
| |
| /* Number of bytes actually used in `buffer'. */ |
| unsigned long int used; |
| |
| /* Syntax setting with which the pattern was compiled. */ |
| reg_syntax_t syntax; |
| |
| /* Pointer to a fastmap, if any, otherwise zero. re_search uses |
| the fastmap, if there is one, to skip over impossible |
| starting points for matches. */ |
| char *fastmap; |
| |
| /* Either a translate table to apply to all characters before |
| comparing them, or zero for no translation. The translation |
| is applied to a pattern when it is compiled and to a string |
| when it is matched. */ |
| RE_TRANSLATE_TYPE translate; |
| |
| /* Number of subexpressions found by the compiler. */ |
| size_t re_nsub; |
| |
| /* Zero if this pattern cannot match the empty string, one else. |
| Well, in truth it's used only in `re_search_2', to see |
| whether or not we should use the fastmap, so we don't set |
| this absolutely perfectly; see `re_compile_fastmap' (the |
| `duplicate' case). */ |
| unsigned can_be_null : 1; |
| |
| /* If REGS_UNALLOCATED, allocate space in the `regs' structure |
| for `max (RE_NREGS, re_nsub + 1)' groups. |
| If REGS_REALLOCATE, reallocate space if necessary. |
| If REGS_FIXED, use what's there. */ |
| #define REGS_UNALLOCATED 0 |
| #define REGS_REALLOCATE 1 |
| #define REGS_FIXED 2 |
| unsigned regs_allocated : 2; |
| |
| /* Set to zero when `regex_compile' compiles a pattern; set to one |
| by `re_compile_fastmap' if it updates the fastmap. */ |
| unsigned fastmap_accurate : 1; |
| |
| /* If set, `re_match_2' does not return information about |
| subexpressions. */ |
| unsigned no_sub : 1; |
| |
| /* If set, a beginning-of-line anchor doesn't match at the |
| beginning of the string. */ |
| unsigned not_bol : 1; |
| |
| /* Similarly for an end-of-line anchor. */ |
| unsigned not_eol : 1; |
| |
| /* If true, an anchor at a newline matches. */ |
| unsigned newline_anchor : 1; |
| |
| /* [[[end pattern_buffer]]] */ |
| }; |
| |
| typedef struct re_pattern_buffer regex_t; |
| |
| /* Type for byte offsets within the string. POSIX mandates this. */ |
| typedef int regoff_t; |
| |
| |
| /* This is the structure we store register match data in. See |
| regex.texinfo for a full description of what registers match. */ |
| struct re_registers |
| { |
| unsigned num_regs; |
| regoff_t *start; |
| regoff_t *end; |
| }; |
| |
| |
| /* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer, |
| `re_match_2' returns information about at least this many registers |
| the first time a `regs' structure is passed. */ |
| #ifndef RE_NREGS |
| # define RE_NREGS 30 |
| #endif |
| |
| |
| /* POSIX specification for registers. Aside from the different names than |
| `re_registers', POSIX uses an array of structures, instead of a |
| structure of arrays. */ |
| typedef struct |
| { |
| regoff_t rm_so; /* Byte offset from string's start to substring's start. */ |
| regoff_t rm_eo; /* Byte offset from string's start to substring's end. */ |
| } regmatch_t; |
| |
| /* Declarations for routines. */ |
| |
| /* To avoid duplicating every routine declaration -- once with a |
| prototype (if we are ANSI), and once without (if we aren't) -- we |
| use the following macro to declare argument types. This |
| unfortunately clutters up the declarations a bit, but I think it's |
| worth it. */ |
| |
| /* Sets the current default syntax to SYNTAX, and return the old syntax. |
| You can also simply assign to the `re_syntax_options' variable. */ |
| extern reg_syntax_t re_set_syntax (reg_syntax_t syntax); |
| |
| /* Compile the regular expression PATTERN, with length LENGTH |
| and syntax given by the global `re_syntax_options', into the buffer |
| BUFFER. Return NULL if successful, and an error string if not. */ |
| extern const char *re_compile_pattern (const char *pattern, size_t length, |
| struct re_pattern_buffer *buffer); |
| |
| |
| /* Compile a fastmap for the compiled pattern in BUFFER; used to |
| accelerate searches. Return 0 if successful and -2 if was an |
| internal error. */ |
| extern int re_compile_fastmap (struct re_pattern_buffer *buffer); |
| |
| |
| /* Search in the string STRING (with length LENGTH) for the pattern |
| compiled into BUFFER. Start searching at position START, for RANGE |
| characters. Return the starting position of the match, -1 for no |
| match, or -2 for an internal error. Also return register |
| information in REGS (if REGS and BUFFER->no_sub are nonzero). */ |
| extern int re_search (struct re_pattern_buffer *buffer, const char *string, |
| int length, int start, int range, |
| struct re_registers *regs); |
| |
| |
| /* Like `re_search', but search in the concatenation of STRING1 and |
| STRING2. Also, stop searching at index START + STOP. */ |
| extern int re_search_2 (struct re_pattern_buffer *buffer, const char *string1, |
| int length1, const char *string2, int length2, |
| int start, int range, struct re_registers *regs, |
| int stop); |
| |
| |
| /* Like `re_search', but return how many characters in STRING the regexp |
| in BUFFER matched, starting at position START. */ |
| extern int re_match (struct re_pattern_buffer *buffer, const char *string, |
| int length, int start, struct re_registers *regs); |
| |
| |
| /* Relates to `re_match' as `re_search_2' relates to `re_search'. */ |
| extern int re_match_2 (struct re_pattern_buffer *buffer, const char *string1, |
| int length1, const char *string2, int length2, |
| int start, struct re_registers *regs, int stop); |
| |
| |
| /* Set REGS to hold NUM_REGS registers, storing them in STARTS and |
| ENDS. Subsequent matches using BUFFER and REGS will use this memory |
| for recording register information. STARTS and ENDS must be |
| allocated with malloc, and must each be at least `NUM_REGS * sizeof |
| (regoff_t)' bytes long. |
| |
| If NUM_REGS == 0, then subsequent matches should allocate their own |
| register data. |
| |
| Unless this function is called, the first search or match using |
| PATTERN_BUFFER will allocate its own register data, without |
| freeing the old data. */ |
| extern void re_set_registers (struct re_pattern_buffer *buffer, |
| struct re_registers *regs, |
| unsigned num_regs, regoff_t *starts, |
| regoff_t *ends); |
| |
| #if defined _REGEX_RE_COMP || defined _LIBC |
| # ifndef _CRAY |
| /* 4.2 bsd compatibility. */ |
| extern char *re_comp (const char *); |
| extern int re_exec (const char *); |
| # endif |
| #endif |
| |
| /* GCC 2.95 and later have "__restrict"; C99 compilers have |
| "restrict", and "configure" may have defined "restrict". */ |
| #ifndef __restrict |
| # if ! (2 < __GNUC__ || (2 == __GNUC__ && 95 <= __GNUC_MINOR__)) |
| # if defined restrict || 199901L <= __STDC_VERSION__ |
| # define __restrict restrict |
| # else |
| # define __restrict |
| # endif |
| # endif |
| #endif |
| |
| /* GCC 3.1 and later support declaring arrays as non-overlapping |
| using the syntax array_name[restrict] */ |
| #ifndef __restrict_arr |
| # if ! (3 < __GNUC__ || (3 == __GNUC__ && 1 <= __GNUC_MINOR__)) || defined (__GNUG__) |
| # define __restrict_arr |
| # else |
| # define __restrict_arr __restrict |
| # endif |
| #endif |
| |
| /* POSIX compatibility. */ |
| extern int regcomp (regex_t *__restrict __preg, |
| const char *__restrict __pattern, |
| int __cflags); |
| |
| #if (__GNUC__) |
| __extension__ |
| #endif |
| extern int regexec (const regex_t *__restrict __preg, |
| const char *__restrict __string, size_t __nmatch, |
| regmatch_t __pmatch[__restrict_arr], |
| int __eflags); |
| |
| extern size_t regerror (int __errcode, const regex_t *__preg, |
| char *__errbuf, size_t __errbuf_size); |
| |
| extern void regfree (regex_t *__preg); |
| |
| |
| #ifdef __cplusplus |
| } |
| #endif /* C++ */ |
| |
| #endif /* regex.h */ |
| |
| /* |
| Local variables: |
| make-backup-files: t |
| version-control: t |
| trim-versions-without-asking: nil |
| End: |
| */ |