| # Makefile.in generated by automake 1.11.1 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, |
| # Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # Makefile.am -- Backtrace Makefile. |
| # Copyright (C) 2012-2014 Free Software Foundation, Inc. |
| |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: |
| |
| # (1) Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| |
| # (2) Redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in |
| # the documentation and/or other materials provided with the |
| # distribution. |
| |
| # (3) The name of the author may not be used to |
| # endorse or promote products derived from this software without |
| # specific prior written permission. |
| |
| # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR |
| # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| # DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, |
| # INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| # SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| # IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| # POSSIBILITY OF SUCH DAMAGE. |
| |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| check_PROGRAMS = $(am__EXEEXT_1) |
| @NATIVE_TRUE@am__append_1 = btest stest |
| subdir = . |
| DIST_COMMON = README ChangeLog $(srcdir)/Makefile.in \ |
| $(srcdir)/Makefile.am $(top_srcdir)/configure \ |
| $(am__configure_deps) $(srcdir)/config.h.in \ |
| $(srcdir)/../mkinstalldirs $(srcdir)/backtrace-supported.h.in |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/../config/lead-dot.m4 \ |
| $(top_srcdir)/../config/multi.m4 \ |
| $(top_srcdir)/../config/override.m4 \ |
| $(top_srcdir)/../config/stdint.m4 \ |
| $(top_srcdir)/../config/unwind_ipinfo.m4 \ |
| $(top_srcdir)/../config/warnings.m4 \ |
| $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \ |
| $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \ |
| $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno config.status.lineno |
| mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs |
| CONFIG_HEADER = config.h |
| CONFIG_CLEAN_FILES = backtrace-supported.h |
| CONFIG_CLEAN_VPATH_FILES = |
| LTLIBRARIES = $(noinst_LTLIBRARIES) |
| am__DEPENDENCIES_1 = |
| am_libbacktrace_la_OBJECTS = atomic.lo dwarf.lo fileline.lo posix.lo \ |
| print.lo sort.lo state.lo |
| libbacktrace_la_OBJECTS = $(am_libbacktrace_la_OBJECTS) |
| @NATIVE_TRUE@am__EXEEXT_1 = btest$(EXEEXT) stest$(EXEEXT) |
| @NATIVE_TRUE@am_btest_OBJECTS = btest-btest.$(OBJEXT) |
| btest_OBJECTS = $(am_btest_OBJECTS) |
| @NATIVE_TRUE@btest_DEPENDENCIES = libbacktrace.la |
| btest_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=link $(CCLD) $(btest_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ |
| $(LDFLAGS) -o $@ |
| @NATIVE_TRUE@am_stest_OBJECTS = stest.$(OBJEXT) |
| stest_OBJECTS = $(am_stest_OBJECTS) |
| @NATIVE_TRUE@stest_DEPENDENCIES = libbacktrace.la |
| DEFAULT_INCLUDES = -I.@am__isrc@ |
| depcomp = |
| am__depfiles_maybe = |
| COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ |
| $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ |
| $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| CCLD = $(CC) |
| LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ |
| $(LDFLAGS) -o $@ |
| SOURCES = $(libbacktrace_la_SOURCES) $(EXTRA_libbacktrace_la_SOURCES) \ |
| $(btest_SOURCES) $(stest_SOURCES) |
| MULTISRCTOP = |
| MULTIBUILDTOP = |
| MULTIDIRS = |
| MULTISUBDIR = |
| MULTIDO = true |
| MULTICLEAN = true |
| ETAGS = etags |
| CTAGS = ctags |
| am__tty_colors = \ |
| red=; grn=; lgn=; blu=; std= |
| ACLOCAL = @ACLOCAL@ |
| ALLOC_FILE = @ALLOC_FILE@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BACKTRACE_FILE = @BACKTRACE_FILE@ |
| BACKTRACE_SUPPORTED = @BACKTRACE_SUPPORTED@ |
| BACKTRACE_SUPPORTS_THREADS = @BACKTRACE_SUPPORTS_THREADS@ |
| BACKTRACE_USES_MALLOC = @BACKTRACE_USES_MALLOC@ |
| CC = @CC@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| EXTRA_FLAGS = @EXTRA_FLAGS@ |
| FGREP = @FGREP@ |
| FORMAT_FILE = @FORMAT_FILE@ |
| GREP = @GREP@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MKDIR_P = @MKDIR_P@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PIC_FLAG = @PIC_FLAG@ |
| RANLIB = @RANLIB@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| VERSION = @VERSION@ |
| VIEW_FILE = @VIEW_FILE@ |
| WARN_FLAGS = @WARN_FLAGS@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__leading_dot = @am__leading_dot@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| libtool_VERSION = @libtool_VERSION@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| multi_basedir = @multi_basedir@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| ACLOCAL_AMFLAGS = -I .. -I ../config |
| AM_CPPFLAGS = -I $(top_srcdir)/../include -I $(top_srcdir)/../libgcc \ |
| -I ../libgcc |
| |
| AM_CFLAGS = $(EXTRA_FLAGS) $(WARN_FLAGS) $(PIC_FLAG) |
| noinst_LTLIBRARIES = libbacktrace.la |
| libbacktrace_la_SOURCES = \ |
| backtrace.h \ |
| atomic.c \ |
| dwarf.c \ |
| fileline.c \ |
| internal.h \ |
| posix.c \ |
| print.c \ |
| sort.c \ |
| state.c |
| |
| BACKTRACE_FILES = \ |
| backtrace.c \ |
| simple.c \ |
| nounwind.c |
| |
| FORMAT_FILES = \ |
| elf.c \ |
| unknown.c |
| |
| VIEW_FILES = \ |
| read.c \ |
| mmapio.c |
| |
| ALLOC_FILES = \ |
| alloc.c \ |
| mmap.c |
| |
| EXTRA_libbacktrace_la_SOURCES = \ |
| $(BACKTRACE_FILES) \ |
| $(FORMAT_FILES) \ |
| $(VIEW_FILES) \ |
| $(ALLOC_FILES) |
| |
| libbacktrace_la_LIBADD = \ |
| $(BACKTRACE_FILE) \ |
| $(FORMAT_FILE) \ |
| $(VIEW_FILE) \ |
| $(ALLOC_FILE) |
| |
| libbacktrace_la_DEPENDENCIES = $(libbacktrace_la_LIBADD) |
| TESTS = $(check_PROGRAMS) |
| @NATIVE_TRUE@btest_SOURCES = btest.c |
| @NATIVE_TRUE@btest_CFLAGS = $(AM_CFLAGS) -g -O |
| @NATIVE_TRUE@btest_LDADD = libbacktrace.la |
| @NATIVE_TRUE@stest_SOURCES = stest.c |
| @NATIVE_TRUE@stest_LDADD = libbacktrace.la |
| |
| # We can't use automake's automatic dependency tracking, because it |
| # breaks when using bootstrap-lean. Automatic dependency tracking |
| # with GCC bootstrap will cause some of the objects to depend on |
| # header files in prev-gcc/include, e.g., stddef.h and stdarg.h. When |
| # using bootstrap-lean, prev-gcc is removed after each stage. When |
| # running "make install", those header files will be gone, causing the |
| # library to be rebuilt at install time. That may not succeed. |
| |
| # These manual dependencies do not include dependencies on unwind.h, |
| # even though that is part of GCC, because where to find it depends on |
| # whether we are being built as a host library or a target library. |
| INCDIR = $(top_srcdir)/../include |
| all: config.h |
| $(MAKE) $(AM_MAKEFLAGS) all-am |
| |
| .SUFFIXES: |
| .SUFFIXES: .c .lo .o .obj |
| am--refresh: |
| @: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --foreign --ignore-deps'; \ |
| $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign --ignore-deps \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign --ignore-deps Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| $(am__cd) $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| $(am__aclocal_m4_deps): |
| |
| config.h: stamp-h1 |
| @if test ! -f $@; then \ |
| rm -f stamp-h1; \ |
| $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ |
| else :; fi |
| |
| stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status |
| @rm -f stamp-h1 |
| cd $(top_builddir) && $(SHELL) ./config.status config.h |
| $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) |
| rm -f stamp-h1 |
| touch $@ |
| |
| distclean-hdr: |
| -rm -f config.h stamp-h1 |
| backtrace-supported.h: $(top_builddir)/config.status $(srcdir)/backtrace-supported.h.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| |
| clean-noinstLTLIBRARIES: |
| -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) |
| @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ |
| dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ |
| test "$$dir" != "$$p" || dir=.; \ |
| echo "rm -f \"$${dir}/so_locations\""; \ |
| rm -f "$${dir}/so_locations"; \ |
| done |
| libbacktrace.la: $(libbacktrace_la_OBJECTS) $(libbacktrace_la_DEPENDENCIES) |
| $(LINK) $(libbacktrace_la_OBJECTS) $(libbacktrace_la_LIBADD) $(LIBS) |
| |
| clean-checkPROGRAMS: |
| @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ |
| echo " rm -f" $$list; \ |
| rm -f $$list || exit $$?; \ |
| test -n "$(EXEEXT)" || exit 0; \ |
| list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ |
| echo " rm -f" $$list; \ |
| rm -f $$list |
| btest$(EXEEXT): $(btest_OBJECTS) $(btest_DEPENDENCIES) |
| @rm -f btest$(EXEEXT) |
| $(btest_LINK) $(btest_OBJECTS) $(btest_LDADD) $(LIBS) |
| stest$(EXEEXT): $(stest_OBJECTS) $(stest_DEPENDENCIES) |
| @rm -f stest$(EXEEXT) |
| $(LINK) $(stest_OBJECTS) $(stest_LDADD) $(LIBS) |
| |
| mostlyclean-compile: |
| -rm -f *.$(OBJEXT) |
| |
| distclean-compile: |
| -rm -f *.tab.c |
| |
| .c.o: |
| $(COMPILE) -c $< |
| |
| .c.obj: |
| $(COMPILE) -c `$(CYGPATH_W) '$<'` |
| |
| .c.lo: |
| $(LTCOMPILE) -c -o $@ $< |
| |
| btest-btest.o: btest.c |
| $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(btest_CFLAGS) $(CFLAGS) -c -o btest-btest.o `test -f 'btest.c' || echo '$(srcdir)/'`btest.c |
| |
| btest-btest.obj: btest.c |
| $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(btest_CFLAGS) $(CFLAGS) -c -o btest-btest.obj `if test -f 'btest.c'; then $(CYGPATH_W) 'btest.c'; else $(CYGPATH_W) '$(srcdir)/btest.c'; fi` |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool config.lt |
| |
| # GNU Make needs to see an explicit $(MAKE) variable in the command it |
| # runs to enable its job server during parallel builds. Hence the |
| # comments below. |
| all-multi: |
| $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE) |
| install-multi: |
| $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE) |
| |
| mostlyclean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE) |
| clean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE) |
| distclean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE) |
| maintainer-clean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE) |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| set x; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: CTAGS |
| CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| check-TESTS: $(TESTS) |
| @failed=0; all=0; xfail=0; xpass=0; skip=0; \ |
| srcdir=$(srcdir); export srcdir; \ |
| list=' $(TESTS) '; \ |
| $(am__tty_colors); \ |
| if test -n "$$list"; then \ |
| for tst in $$list; do \ |
| if test -f ./$$tst; then dir=./; \ |
| elif test -f $$tst; then dir=; \ |
| else dir="$(srcdir)/"; fi; \ |
| if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ |
| all=`expr $$all + 1`; \ |
| case " $(XFAIL_TESTS) " in \ |
| *[\ \ ]$$tst[\ \ ]*) \ |
| xpass=`expr $$xpass + 1`; \ |
| failed=`expr $$failed + 1`; \ |
| col=$$red; res=XPASS; \ |
| ;; \ |
| *) \ |
| col=$$grn; res=PASS; \ |
| ;; \ |
| esac; \ |
| elif test $$? -ne 77; then \ |
| all=`expr $$all + 1`; \ |
| case " $(XFAIL_TESTS) " in \ |
| *[\ \ ]$$tst[\ \ ]*) \ |
| xfail=`expr $$xfail + 1`; \ |
| col=$$lgn; res=XFAIL; \ |
| ;; \ |
| *) \ |
| failed=`expr $$failed + 1`; \ |
| col=$$red; res=FAIL; \ |
| ;; \ |
| esac; \ |
| else \ |
| skip=`expr $$skip + 1`; \ |
| col=$$blu; res=SKIP; \ |
| fi; \ |
| echo "$${col}$$res$${std}: $$tst"; \ |
| done; \ |
| if test "$$all" -eq 1; then \ |
| tests="test"; \ |
| All=""; \ |
| else \ |
| tests="tests"; \ |
| All="All "; \ |
| fi; \ |
| if test "$$failed" -eq 0; then \ |
| if test "$$xfail" -eq 0; then \ |
| banner="$$All$$all $$tests passed"; \ |
| else \ |
| if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ |
| banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ |
| fi; \ |
| else \ |
| if test "$$xpass" -eq 0; then \ |
| banner="$$failed of $$all $$tests failed"; \ |
| else \ |
| if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ |
| banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ |
| fi; \ |
| fi; \ |
| dashes="$$banner"; \ |
| skipped=""; \ |
| if test "$$skip" -ne 0; then \ |
| if test "$$skip" -eq 1; then \ |
| skipped="($$skip test was not run)"; \ |
| else \ |
| skipped="($$skip tests were not run)"; \ |
| fi; \ |
| test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ |
| dashes="$$skipped"; \ |
| fi; \ |
| report=""; \ |
| if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ |
| report="Please report to $(PACKAGE_BUGREPORT)"; \ |
| test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ |
| dashes="$$report"; \ |
| fi; \ |
| dashes=`echo "$$dashes" | sed s/./=/g`; \ |
| if test "$$failed" -eq 0; then \ |
| echo "$$grn$$dashes"; \ |
| else \ |
| echo "$$red$$dashes"; \ |
| fi; \ |
| echo "$$banner"; \ |
| test -z "$$skipped" || echo "$$skipped"; \ |
| test -z "$$report" || echo "$$report"; \ |
| echo "$$dashes$$std"; \ |
| test "$$failed" -eq 0; \ |
| else :; fi |
| check-am: all-am |
| $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) |
| $(MAKE) $(AM_MAKEFLAGS) check-TESTS |
| check: check-am |
| all-am: Makefile $(LTLIBRARIES) all-multi config.h |
| installdirs: |
| install: install-am |
| install-exec: install-exec-am |
| install-data: install-data-am |
| uninstall: uninstall-am |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-am |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-am clean-multi |
| |
| clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ |
| clean-noinstLTLIBRARIES mostlyclean-am |
| |
| distclean: distclean-am distclean-multi |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-compile distclean-generic \ |
| distclean-hdr distclean-libtool distclean-tags |
| |
| dvi: dvi-am |
| |
| dvi-am: |
| |
| html: html-am |
| |
| html-am: |
| |
| info: info-am |
| |
| info-am: |
| |
| install-data-am: |
| |
| install-dvi: install-dvi-am |
| |
| install-dvi-am: |
| |
| install-exec-am: install-multi |
| |
| install-html: install-html-am |
| |
| install-html-am: |
| |
| install-info: install-info-am |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-am |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-am |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-am maintainer-clean-multi |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-am mostlyclean-multi |
| |
| mostlyclean-am: mostlyclean-compile mostlyclean-generic \ |
| mostlyclean-libtool |
| |
| pdf: pdf-am |
| |
| pdf-am: |
| |
| ps: ps-am |
| |
| ps-am: |
| |
| uninstall-am: |
| |
| .MAKE: all all-multi check-am clean-multi distclean-multi install-am \ |
| install-multi install-strip maintainer-clean-multi \ |
| mostlyclean-multi |
| |
| .PHONY: CTAGS GTAGS all all-am all-multi am--refresh check check-TESTS \ |
| check-am clean clean-checkPROGRAMS clean-generic clean-libtool \ |
| clean-multi clean-noinstLTLIBRARIES ctags distclean \ |
| distclean-compile distclean-generic distclean-hdr \ |
| distclean-libtool distclean-multi distclean-tags dvi dvi-am \ |
| html html-am info info-am install install-am install-data \ |
| install-data-am install-dvi install-dvi-am install-exec \ |
| install-exec-am install-html install-html-am install-info \ |
| install-info-am install-man install-multi install-pdf \ |
| install-pdf-am install-ps install-ps-am install-strip \ |
| installcheck installcheck-am installdirs maintainer-clean \ |
| maintainer-clean-generic maintainer-clean-multi mostlyclean \ |
| mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ |
| mostlyclean-multi pdf pdf-am ps ps-am tags uninstall \ |
| uninstall-am |
| |
| alloc.lo: config.h backtrace.h internal.h |
| backtrace.lo: config.h backtrace.h |
| btest.lo: (INCDIR)/filenames.h backtrace.h backtrace-supported.h |
| dwarf.lo: config.h $(INCDIR)/dwarf2.h $(INCDIR)/dwarf2.def \ |
| $(INCDIR)/filenames.h backtrace.h internal.h |
| elf.lo: config.h backtrace.h internal.h |
| fileline.lo: config.h backtrace.h internal.h |
| mmap.lo: config.h backtrace.h internal.h |
| mmapio.lo: config.h backtrace.h internal.h |
| nounwind.lo: config.h internal.h |
| posix.lo: config.h backtrace.h internal.h |
| print.lo: config.h backtrace.h internal.h |
| read.lo: config.h backtrace.h internal.h |
| simple.lo: config.h backtrace.h internal.h |
| state.lo: config.h backtrace.h backtrace-supported.h internal.h |
| unknown.lo: config.h backtrace.h internal.h |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |