| 2011-11-29 Joel Brobecker <brobecker@adacore.com> |
| |
| * MAINTAINERS (Global Maintainers): New section. Add Mike |
| Frysinger. |
| |
| 2011-11-28 DJ Delorie <dj@redhat.com> |
| |
| * configure.tgt: Add rl78 support. |
| * configure: Regenerate. |
| * rl78: New directory. |
| * MAINTAINERS: Add myself as RL78 maintainer. |
| |
| 2011-07-08 Hans-Peter Nilsson <hp@axis.com> |
| |
| * MAINTAINERS: Remove Thiemo Seufer. |
| |
| 2011-06-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.tgt (bfin-*-*): Add sim_testsuite=yes. |
| * configure: Regenerate. |
| |
| 2011-05-04 Joseph Myers <joseph@codesourcery.com> |
| |
| * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't |
| handle targets. |
| * configure: Regenerate. |
| |
| 2011-03-05 Mike Frysinger <vapier@gentoo.org> |
| |
| * MAINTAINERS: Add bfin entry. |
| * configure.tgt (bfin-*-*): Handle bfin targets. |
| * configure: Regenerate. |
| |
| 2011-01-05 Mike Frysinger <vapier@gentoo.org> |
| |
| * .gitignore: Add /*/hw-config.h. |
| |
| 2010-12-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * .gitignore: New file. |
| |
| 2010-07-28 DJ Delorie <dj@redhat.com> |
| |
| * MAINTAINERS: Add self as RX maintainer. Sort list. |
| |
| 2010-06-08 Nick Clifton <nickc@redhat.com> |
| |
| * reg.c (set_oszc): Use unsigned int for the mask. |
| (set_szc, set_osz, set_sz): Likewise. |
| |
| 2010-04-26 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Target logic moved out to and included from ... |
| * configure.tgt: ... this new file. |
| * configure: Regenerated. |
| |
| 2010-04-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * README-HACKING: Add more sections. |
| |
| 2010-02-11 Doug Evans <dje@sebabeach.org> |
| |
| * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c, |
| * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c, |
| * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c, |
| * cris/semcrisv32f-switch.c: Regenerate. |
| |
| 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * avr/configure: Regenerate. |
| * cris/configure: Regenerate. |
| * microblaze/configure: Regenerate. |
| |
| 2010-01-02 Doug Evans <dje@sebabeach.org> |
| |
| * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c, |
| * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c, |
| * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c, |
| * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h, |
| * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c, |
| * cris/semcrisv32f-switch.c: Regenerate, update copyright year. |
| |
| 2010-01-01 Doug Evans <dje@sebabeach.org> |
| |
| * cris/mloop.in: Fix copyright year update snafu. |
| |
| 2009-11-24 Joel Brobecker <brobecker@adacore.com> |
| |
| * common/aclocal.m4: Add include of ../../config/zlib.m4. |
| * common/common.m4: Use AM_ZLIB to check for zlib support. |
| * ppc/configure.ac: Likewise. |
| * arm/configure, avr/configure, common/configure, cr16/configure, |
| cris/configure, d10v/configure, erc32/configure, frv/configure, |
| h8300/configure, iq2000/configure, lm32/configure, m32c/configure, |
| m32r/configure, m68hc11/configure, mcore/configure, |
| microblaze/configure, mips/configure, mn10300/configure, |
| moxie/configure, ppc/configure, sh/configure, sh64/configure, |
| v850/configure: Regenerate. |
| |
| 2009-11-24 DJ Delorie <dj@redhat.com> |
| |
| * rx: New directory. |
| * configure.ac: Add entry for Renesas RX. |
| * configure: Regenerate. |
| |
| 2009-11-22 Doug Evans <dje@sebabeach.org> |
| |
| * cris/cpuall.h: Regenerate. |
| * cris/cpuv10.h: Regenerate. |
| * cris/cpuv32.h: Regenerate. |
| * cris/decodev10.c: Regenerate. |
| * cris/decodev10.h: Regenerate. |
| * cris/decodev32.c: Regenerate. |
| * cris/decodev32.h: Regenerate. |
| |
| 2009-11-12 Tristan Gingold <gingold@adacore.com> |
| |
| * avr/interp.c (sim_write): Allow byte access. |
| (sim_read): Ditto. |
| |
| 2009-11-12 Tristan Gingold <gingold@adacore.com> |
| |
| * avr/interp.c (sim_load): Clear memory before loading. |
| |
| 2009-11-09 Tristan Gingold <gingold@adacore.com> |
| |
| * avr/interp.c (sim_resume): Fix typo for OP_ret. |
| |
| 2009-10-23 Doug Evans <dje@sebabeach.org> |
| |
| * cris/arch.c: Regenerate. |
| * cris/arch.h: Regenerate. |
| * cris/cpuall.h: Regenerate. |
| * cris/cpuv10.c: Regenerate. |
| * cris/cpuv10.h: Regenerate. |
| * cris/cpuv32.c: Regenerate. |
| * cris/cpuv32.h: Regenerate. |
| * cris/cris-desc.c: Regenerate. |
| * cris/cris-desc.h: Regenerate. |
| * cris/cris-opc.h: Regenerate. |
| * cris/decodev10.c: Regenerate. |
| * cris/decodev10.h: Regenerate. |
| * cris/decodev32.c: Regenerate. |
| * cris/decodev32.h: Regenerate. |
| * cris/modelv10.c: Regenerate. |
| * cris/modelv32.c: Regenerate. |
| * cris/semcrisv10f-switch.c: Regenerate. |
| * cris/semcrisv32f-switch.c: Regenerate. |
| |
| 2009-10-22 Tristan Gingold <gingold@adacore.com> |
| |
| * avr/interp.c (sim_stop): Return 1. |
| |
| 2009-10-16 Doug Evans <dje@sebabeach.org> |
| |
| * MAINTAINERS: Add myself as m32r maintainer. |
| |
| 2009-10-15 Michael Egaer <eager@eagercon.com> |
| |
| * MAINTAINERS: Add self as MicroBlaze maintainer. |
| |
| 2009-10-14 Ben Elliston <bje@gnu.org> |
| |
| * MAINTAINERS (common): Move myself to "past maintainers" section. |
| |
| 2009-10-06 Michael Eager <eager@eagercon.com> |
| |
| * microblaze/interp.c: Add include microblaze-dis.h. |
| |
| 2009-09-23 Michael Eager <eager@eagercon.com> |
| |
| * configure: Add microblaze-*.* (not regenerated). |
| * configure.ac: Likewise. |
| * microblaze/config.in: New. |
| * microblaze/configure: Generate. |
| * microblaze/configure.ac: New. |
| * microblaze/interp.c: New. |
| * microblaze/Makefile.in: New. |
| * microblaze/microblaze.h: New. |
| * microblaze/microblaze.isa: New. |
| * microblaze/sim-main.h: New. |
| * microblaze/sysdep.h: New. |
| |
| 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * avr/config.in: Regenerate. |
| * avr/configure: Likewise. |
| * configure: Likewise. |
| * cris/config.in: Likewise. |
| * cris/configure: Likewise. |
| |
| * configure.ac: m4_include toplevel config/override.m4. |
| * configure: Regenerate. |
| * avr/configure: Regenerate. |
| * cris/configure: Regenerate. |
| |
| 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * Makefile.in (datarootdir): New variable. |
| |
| 2009-05-18 Jon Beniston <jon@beniston.com> |
| |
| * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim. |
| * configure.ac: Add lm32 target. |
| * lm32: New directory. |
| |
| 2009-05-11 Andrew Cagney <cagney@gnu.org> |
| |
| * MAINTAINERS: Orphan ppc. |
| |
| 2009-05-08 Kevin Buettner <kevinb@redhat.com> |
| |
| * m32c/gdb-if.c (m32c_signal_to_host): Rename to |
| m32c_signal_to_target. Change signal return values from SIGILL, |
| SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP, |
| TARGET_SIGNAL_SEGV, etc. Fix all callers. |
| |
| 2009-04-30 Anthony Green <green@moxielogic.com> |
| |
| * MAINTAINERS: Add myself for the moxie port. |
| * moxie: New directory. |
| * configure.ac: Add entry for moxie. |
| * configure: Regenerate. |
| |
| 2009-04-27 Tristan Gingold <gingold@adacore.com> |
| |
| * avr: New directory. |
| * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files. |
| * avr/config.in: New file, generated by autoheader. |
| * avr/configure: New file generated by autoconf. |
| * configure.ac: Add avr. |
| * configure: Regenerated. |
| |
| 2009-04-17 Carlos O'Donell <carlos@codesourcery.com> |
| |
| * Makefile.in: Add dummy install-pdf, html, and |
| install-html targets. |
| |
| 2009-01-18 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/sim-if.c: Include errno.h. |
| (cris_start_address, cris_program_offset): New variables. |
| (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option |
| enums. |
| (cris_options): New options --cris-program-offset and |
| --cris-start-address. |
| (cris_option_handler): Handle new options. |
| (cris_program_offset_write, cris_set_section_offset_iterator) |
| (cris_offset_sections, cris_offset_sections): New functions. |
| (sim_load): Use cris_program_offset_write as function argument to |
| cris_load_elf_file, not sim_write. |
| (struct offsetinfo): New struct. |
| (cris_handle_interpreter): Fix typo in comment. |
| (sim_open): Call cris_offset_sections as soon as the bfd of the |
| infile is available. Gate bfd validity checks on abfd non-NULL. |
| (sim_create_inferior): Let cris_start_address when != -1 override |
| other start-address choices. |
| |
| 2009-01-06 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/traps.c (abort): Define to call sim_io_error. |
| (create_map): Make -1 imply a non-fixed address, not 0. All |
| callers changed. Only prefer the next higher unmapped address if |
| the last mapped address is no less than 0x40000000. Check that |
| the address to be mapped is not already mapped. Update head |
| comment. |
| (unmap_pages): Don't call abort when recursive call fails, just |
| note and return an error if a page in the range couldn't be unmapped. |
| (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler) |
| (schedule, make_first_thread, cris_pipe_empty): New local variable sd. |
| (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle |
| non-MAP_FIXED argument overlapping existing map. For MAP_FIXED, |
| don't abort on page not being mapped. Handle non-anon filemap |
| with length padded to pagesize. |
| |
| 2009-01-03 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT) |
| (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE) |
| (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID) |
| (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP) |
| (TARGET_AT_CLKTCK): Remove redundant macros. |
| (AUX_ENT): Adjust to use standard ELF AT_* macros. |
| (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all |
| callers. |
| (sim_open): Also pass AT_SECURE. |
| |
| * cris/sim-main.h (struct _sim_cpu): New member |
| set_target_thread_data. |
| * cris/crisv32f.c (CRIS_TLS_REGISTER): Define. |
| * cris/crisv10f.c: Ditto. |
| * cris/cris-tmpl.c (MY (set_target_thread_data)): New function. |
| (MY (f_specific_init)): Set new _sim_cpu member to new function. |
| * cris/traps.c (TARGET_SYS_set_thread_area): Define. |
| (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New |
| case. |
| |
| * cris/traps.c (TARGET_SYS_exit_group): Define. |
| (cris_break_13_handler): Handle it like the exit for the last |
| thread. |
| |
| * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01. |
| (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment. |
| (cris_break_13_handler) <case TARGET_SYS_uname>: Update to |
| 2.6.27. Set machine field to the BFD printable name of the |
| machine. |
| |
| * cris/traps.c (TARGET_MAP_DENYWRITE): Define. |
| (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle |
| TARGET_MAP_DENYWRITE. |
| |
| * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK) |
| (TARGET_X_OK, TARGET_F_OK): Define. |
| (cris_break_13_handler) <case TARGET_SYS_access>: New case. |
| |
| * cris/semcrisv32f-switch.c: Regenerate. |
| |
| 2008-12-30 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit |
| just a short CRIS-specific notice. Tweak the wording for a |
| failing architecture test. |
| |
| * cris/traps.c (TARGET_SYS_writev): New macro. |
| (is_mapped_only, cris_dump_map): New functions. |
| (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags |
| and prot combinations and a non-zero page-offset. If |
| TARGET_MAP_FIXED, unmap pages before mapping them. |
| <case TARGET_SYS_mprotect>: When checking, allow any length |
| argument. Don't actually do anything. |
| <case TARGET_SYS_writev>: New case. |
| |
| * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o. |
| * cris/sim-if.c: Include elf-bfd.h. |
| (struct progbounds): New members end_loadmem, start_nonloadmem. |
| (xprintf, eprintf): New functions, copied from common/sim-load.c. |
| (cris_load_elf_file, sim_load, cris_get_progbounds): New functions. |
| (get_progbounds_iterator): Renamed from get_progbounds. Make |
| static. Update head comment. Set new struct progbounds members. |
| (exec_load_addr, interp_load_addr, interp_start_addr): New static |
| variables. |
| (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base) |
| (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New |
| functions. |
| (sim_open): New constant array auxv_entries. Rewrite AUX_ENT |
| handling to use auxv_entries. Improve error message and checking |
| for invalid programs. Use new variable abfd for the program |
| instead of for each access reaching into sd to get it. |
| (sim_create_inferior): If non-zero, use interp_start_addr instead |
| of the program start address. |
| (cris_disassemble_insn): Remove incorrect and unclear, supposedly |
| stale comment. Always specify little-endian. |
| |
| 2008-07-29 Nick Clifton <nickc@redhat.com> |
| |
| * common/genmloop.sh: Add new parameter: -shell to specify the |
| command interpreter to use to run the input file. This is |
| necessary because otherwise SHELL is taken from the user's |
| environment, and not from the makefile that invoked this script |
| and the user might not be running an sh-like shell. |
| * cris/Makefile.in: Pass -shell parameter to genmloop.sh. |
| * fr30/Makefile.in: Likewise. |
| * frv/Makefile.in: Likewise. |
| * i960/Makefile.in: Likewise. |
| * iq2000/Makefile.in: Likewise. |
| * m32r/Makefile.in: Likewise. |
| |
| * frv/mloop.in: Add missing start of line comment marker. |
| |
| 2008-07-11 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/configure: Regenerate to track ../common/common.m4 changes. |
| * cris/config.in: Ditto. |
| |
| 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> |
| Daniel Jacobowitz <dan@codesourcery.com> |
| Joseph Myers <joseph@codesourcery.com> |
| |
| * cris/configure: Regenerate. |
| |
| 2008-05-09 Olivier Hainque <hainque@adacore.com> |
| |
| * ppc/altivec.igen (vperm): Latch inputs into temporaries. |
| |
| 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com> |
| |
| * MAINTAINERS: Add myself as maintainer of cr16 port. |
| |
| 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com> |
| |
| Add simulator for National cr16 processor. |
| * cr16: New directory. |
| * configure.ac: Add entry for National cr16. |
| * configure: Regenerate. |
| |
| 2008-02-05 DJ Delorie <dj@redhat.com> |
| |
| * configure.ac (v850): V850 now has a testsuite. |
| * configure (v850): Likewise. |
| |
| 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| Updated copyright notices for most files. |
| |
| 2007-12-19 DJ Delorie <dj@redhat.com> |
| |
| * frv/frv.c (frvbf_cut): Only look at the six LSBs of |
| cut_point. |
| |
| 2007-10-22 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c, |
| cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c, |
| cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c, |
| cris/decodev10.h, cris/decodev32.c, cris/decodev32.h, |
| cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c, |
| cris/semcrisv32f-switch.c: Regenerate. |
| |
| 2007-08-24 Joel Brobecker <brobecker@adacore.com> |
| |
| Switch the license of all files explicitly copyright the FSF |
| to GPLv3. |
| |
| 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com> |
| |
| * Makefile.in: Add dummy "pdf" target. |
| |
| 2007-02-20 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/traps.c (dump_statistics): Change format for cycle numbers |
| to %llu and cast parameters to unsigned long long. |
| |
| 2007-02-16 Thiemo Seufer <ths@mips.com> |
| |
| * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST. |
| |
| 2007-01-28 Manuel Lauss <slauss@resi.at> |
| |
| * configure.ac (sh64-*-*): Change to sh64*-*-*. |
| (sh-*-*): Change to sh*-*-*. |
| * configure: Regenerated. |
| |
| 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| Updated copyright notices for most files. |
| |
| 2006-12-20 Hans-Peter Nilsson <hp@axis.com> |
| |
| * Makefile.in (autoconf-common autoheader-common): Only run |
| autoheader on subdirs with a file config.in. |
| |
| * configure.ac (common): Make the default "yes" for all targets |
| with sim subdirs. |
| * configure: Regenerate. |
| |
| * Makefile.in (autoconf-common autoheader-common): In documented |
| usage, say SHELL=/bin/sh. |
| (.PHONY): Add autoheader-common. |
| |
| * MAINTAINERS: Add self as authorized committer for *. |
| |
| 2006-10-02 Edgar E. Iglesias <edgar@axis.com> |
| Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/cris-sim.h (enum cris_unknown_syscall_action_type) |
| (cris_unknown_syscall_action): Declare. |
| * cris/sim-if.c (cris_unknown_syscall_action): Define. |
| (cris_options): Add cris-unknown-syscall option. |
| (cris_option_handler): Correct comment about and error message for |
| invalid --cris-cycles argument. Handle --cris-unknown-syscall. |
| * cris/traps.c: Include stdarg.h |
| (cris_unknown_syscall): New function. |
| (cris_break_13_handler): Instead of sim_io_eprintf and |
| sim_engine_halt, call cris_unknown_syscall to handle more or less |
| unknown syscalls. Adjust code as necessary to handle return |
| value. |
| |
| 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * MAINTAINERS: Add Dave Brolley for sh64. |
| |
| 2006-09-30 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/traps.c (TARGET_PIPE_BUF): New macro. |
| (cris_pipe_empty): Correct initialization of "remaining". Only |
| adjust the "write" return value if more than TARGET_PIPE_BUF bytes |
| are written. |
| |
| 2006-09-29 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/configure.ac: Check for limits.h and sys/param.h. |
| * cris/configure, cris/config.in: Rebuild. |
| * cris/traps.c (SIM_PATHMAX): New macro. |
| (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN. |
| |
| 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com> |
| |
| * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator. |
| * Makefile.in (FLAGS_TO_PASS): Include libdir. |
| * configure: Regenerated. |
| |
| 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * cris/configure: Regenerated. |
| |
| 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * cris/configure: Regenerated. |
| |
| 2006-05-05 Andreas Schwab <schwab@suse.de> |
| |
| * configure.ac (CFLAGS_FOR_BUILD): Set and substitute. |
| * configure: Regenerate. |
| |
| * Makefile.in (CFLAGS_FOR_BUILD): Define. |
| (CC_FOR_BUILD): Don't override. |
| (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD. |
| |
| 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * MAINTAINERS: Add an "Authorized committers" section, and list |
| DJ Delorie for v850. |
| |
| 2006-04-08 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs. |
| |
| 2006-04-03 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files. |
| * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting. |
| (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules. |
| (all): Depend on rvdummy$(EXEEXT). |
| * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for |
| sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE, |
| default off. |
| * cris/configure: Regenerate. |
| * cris/cris-sim.h (cris_have_900000xxif): Declare here. |
| (enum cris_interrupt_type, crisv10deliver_interrupt) |
| (crisv32deliver_interrupt: New declarations. |
| * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call |
| sim_events_tickn and set state-events member work_pending when it's |
| time for the next event. |
| [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific |
| interrupt-delivery function. |
| * cris/crisv10f.c (MY (deliver_interrupt)): New function. |
| * cris/crisv32f.c (MY (deliver_interrupt)): New function. |
| * cris/devices.c: Include hw-device.h. |
| (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer. |
| (device_io_write_buffer): Only perform 0x900000xx-functions if |
| cris_have_900000xxif is nonzero. Else if WITH_HW defined, |
| call hw_io_write_buffer. Add return 0 last in function. |
| * cris/sim-if.c (cris_have_900000xxif): Now global. |
| (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member. |
| Force "-model" option, effectively. |
| * cris/sim-main.h (cris_interrupt_delivery_fn): New type. |
| (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt. |
| |
| 2006-04-02 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o. |
| (CRISV32F_OBJS): Remove semcrisv32f-switch.o. |
| (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules. |
| |
| 2006-03-13 DJ Delorie <dj@redhat.com> |
| |
| * MAINTAINERS: Add self as m32c sim maintainer. |
| |
| 2006-02-23 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time |
| mapping. |
| (cris_break_13_handler) <case TARGET_SYS_time>: New case. |
| |
| 2006-01-23 Jim Blandy <jimb@redhat.com> |
| |
| Add simulator for Renesas M32C and M16C. |
| |
| * m32c: New directory. |
| * configure.ac: Add entry for Renesas M32C. |
| * configure: Regenerate. |
| |
| 2006-01-10 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic |
| cycle count for the current insn. |
| |
| 2005-12-06 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h, |
| cris/decodev10.c, cris/decodev10.h, cris/decodev32.c, |
| cris/decodev32.h, cris/modelv10.c, cris/modelv32.c, |
| cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate. |
| |
| 2005-12-05 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c, |
| cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c, |
| cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c, |
| cris/decodev10.h, cris/decodev32.c, cris/decodev32.h, |
| cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c, |
| cris/semcrisv32f-switch.c: Regenerate. |
| |
| 2005-11-20 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define. |
| (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and |
| TARGET_O_WRONLY. |
| (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for |
| F_GETFL on fd 0, 1 and 2. |
| |
| 2005-11-17 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/sim-main.h (struct _sim_cpu): New members last_syscall, |
| last_open_fd, last_open_flags. |
| * cris/traps.c: Don't include targ-vals.h. |
| (TARGET_O_ACCMODE): Define. |
| (cris_break_13_handler): Set new _sim_cpu members. |
| <case TARGET_SYS_fcntl>: Support special case of F_GETFL. |
| Rearrange code as switch. Emit "unimplemented" abort for |
| unimplemented fcntl calls. |
| |
| * cris/traps.c (TARGET_SYS_stat): Define. |
| (syscall_stat32_map): Add entry for TARGET_SYS_stat. |
| (cris_break_13_handler) <case TARGET_SYS_stat>: New case. |
| |
| 2005-11-16 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the |
| low 32 bits are used after an unsigned long cast. |
| |
| 2005-05-28 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop. |
| |
| 2005-05-26 Chris Demetriou <cgd@netbsd.org> |
| |
| * MAINTAINERS: Update my mail address, move myself to the |
| "Past maintainers" section. |
| |
| 2005-05-17 Corinna Vinschen <vinschen@redhat.com> |
| |
| * configure.ac: Add igen to v850 build. |
| * configure: Regenerate. |
| |
| 2005-04-29 Paul Brook <paul@codesourcery.com> |
| |
| * common/callback.c (PIPE_BUF): Provide default definition. |
| (os_lstat): Use stat if lstat is not available on the host. |
| (os_ftruncate): Return EINVAL if not available on the host. |
| (os_truncate): Ditto. |
| * common/configure.ac: Check for lstat, truncate and ftruncate. |
| * common/configure: Regenerate. |
| * common/config.in: Regenerate. |
| |
| 2005-04-27 Paul Brook <paul@codesourcery.com> |
| |
| * common/Make-common.in: Add $(EXEEXT) to "run". |
| |
| 2005-04-18 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>: |
| For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't |
| implemented. In call to create_map, pad length argument to 8k. |
| |
| 2005-04-15 Corinna Vinschen <vinschen@redhat.com> |
| |
| * configure.ac: Add explicit sh64 case. |
| * configure: Regenerate. |
| |
| 2005-03-30 Paul Brook <paul@codesourcery.com> |
| |
| * arm/wrapper.c: Provide SIGTRAP and SIGBUS. |
| |
| 2005-03-24 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to |
| include cgen-ops.h in decodev10.c and decodev32.c. |
| * cris/sim-main.h: Don't include cgen-ops.h here. |
| * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c, |
| cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c, |
| cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c, |
| cris/decodev10.h, cris/decodev32.c, cris/decodev32.h, |
| cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c, |
| cris/semcrisv32f-switch.c: Regenerate. |
| |
| * cris/traps.c (cris_break_13_handler) <case |
| TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags, |
| sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc. |
| |
| 2005-03-23 Mark Kettenis <kettenis@gnu.org> |
| |
| * cris/configure: Regenerate. |
| |
| 2005-02-28 Jim Blandy <jimb@redhat.com> |
| |
| * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac, |
| mips/configure.ac, mn10300/configure.ac, v850/configure.ac: |
| Regenerated, after change to common/aclocal.m4. |
| |
| 2005-02-18 Corinna Vinschen <vinschen@redhat.com> |
| |
| * iq2000: New target subdirectory. |
| * configure.ac: Add iq2000 target. |
| * configure: Regenerate. |
| |
| 2005-01-29 Hans-Peter Nilsson <hp@axis.com> |
| |
| * Makefile.in (all, clean mostlyclean, distclean maintainer-clean) |
| (realclean, install): Fail if subdir make failed. |
| |
| 2005-01-28 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris: New directory, simulator for Axis Communications CRIS |
| including CRIS v32, CGEN-based. |
| * configure.ac: Add corresponding configury. |
| * configure: Regenerate. |
| |
| 2005-01-17 Andrew Cagney <cagney@gnu.org> |
| |
| * configure.ac: For mips*-*-* and mn10300*-*-* configure the |
| common directory. Remove sparc*-*-* from list. |
| |
| 2005-01-11 Andrew Cagney <cagney@gnu.org> |
| |
| * Makefile.in (autoconf-common autoheader-common): Add --force to |
| autoconf and autoheader. |
| (autoconf-common autoheader-common) |
| (autoconf-install autoheader-install): Check for configure.ac, not |
| configure.in. |
| * configure.ac: Delete AC_CONFIG_AUX_DIR. |
| * configure: Re-generate. |
| |
| 2005-01-07 Andrew Cagney <cagney@gnu.org> |
| |
| * configure.ac: Replace configure.in. Requires autoconf 2.59 and |
| correctly calls AC_CONFIG_SUBDIRS. |
| * configure: Re-generate. |
| |
| 2004-12-01 Andrew Cagney <cagney@gnu.org> |
| |
| * i960, h8500: Delete directory. |
| |
| 2004-11-12 Andrew Cagney <cagney@gnu.org> |
| |
| * d30v, fr30, mn10200, z8k: Delete directory. |
| |
| 2004-03-10 Ben Elliston <bje@gnu.org> |
| |
| * MAINTAINERS: Update my mail address. |
| |
| 2004-01-26 Chris Demetriou <cgd@broadcom.com> |
| |
| * configure.in (mips*-*-*): Configure in testsuite. |
| * configure: Regenerate. |
| |
| 2003-10-08 Dave Brolley <brolley@redhat.com> |
| |
| * configure.in: Move frv handling to alphabetically correct placement. |
| |
| 2003-09-03 Andreas Schwab <schwab@suse.de> |
| |
| * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir). |
| |
| 2003-08-29 Dave Brolley <brolley@redhat.com> |
| |
| * MAINTAINERS: Add myself as maintainer of the FRV port. |
| |
| 2003-08-20 Michael Snyder <msnyder@redhat.com> |
| Dave Brolley <brolley@redhat.com> |
| |
| * frv/: New directory, simulator for the Fujitsu FRV. |
| * configure.in: Add frv configury. |
| * configure: Regenerate. |
| |
| 2003-08-10 Ben Elliston <bje@wasabisystems.com> |
| |
| * MAINTAINERS: Update my mail address. |
| |
| 2003-08-09 Andrew Cagney <cagney@redhat.com> |
| |
| * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop |
| maintenance. List igen and sh maintainers. Mention that target |
| and global maintainers pick up the slack. |
| |
| 2003-07-09 Michael Snyder <msnyder@redhat.com> |
| |
| * configure.in: Add testsuite to extra_subdirs for sh. |
| * configure: Regenerate. |
| |
| 2003-01-23 Nick Clifton <nickc@redhat.com> |
| |
| * Add sh2e support: |
| |
| 2002-04-02 Alexandre Oliva <aoliva@redhat.com> |
| |
| * sh/gencode.c: Replace sh3e with sh2e except in fsqrt. |
| |
| 2002-08-24 Geoffrey Keating <geoffk@redhat.com> |
| |
| * MAINTAINERS: Update my email address. |
| |
| 2002-07-17 Andrew Cagney <ac131313@redhat.com> |
| |
| * w65/: Delete directory. |
| |
| 2002-07-16 Andrew Cagney <ac131313@redhat.com> |
| |
| * configure.in (extra_subdirs): Mark fr30-*-* as obsolete. |
| * configure: Re-generate. |
| |
| 2002-07-13 Andrew Cagney <ac131313@redhat.com> |
| |
| * configure.in (extra_subdirs): Mark d30v-*-* as obsolete. |
| * configure: Re-generate. |
| |
| 2002-06-16 Andrew Cagney <ac131313@redhat.com> |
| |
| * Makefile.in (autoconf-changelog autoheader-changelog): Let name, |
| id, date and host to be overriden by NAME, ID, DATE and HOST |
| respectfully. Use ISO dates. |
| |
| Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com> |
| |
| * Makefile.in (ChangeLog): New makefile variable. |
| * README-HACKING: Mention the ChangeLog makefile variable. |
| |
| 2002-06-01 Andrew Cagney <ac131313@redhat.com> |
| |
| * tic80/: Delete directory. |
| |
| 2002-05-16 Stephane Carrez <stcarrez@nerim.fr> |
| |
| * MAINTAINERS: Update my email address. |
| |
| 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| |
| * MAINTAINERS: Record self as maintainer of m68hc11 simulator. |
| |
| 2002-03-01 Frank Ch. Eigler <fche@redhat.com> |
| |
| * MAINTAINERS: Record self as a co-maintainer of just common/. |
| |
| 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * MAINTAINERS: Point to GDB files describing overall maintaince |
| and check-in procedures. |
| |
| 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * MAINTAINERS: Add myself for ARM portions. |
| |
| 2001-10-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * configure.in: When Linux or NetBSD, enable PowerPC simulator. |
| * configure: Re-generate. |
| |
| 2001-02-16 Ben Elliston <bje@redhat.com> |
| |
| * MAINTAINERS: Add myself for common portions. |
| |
| 2001-01-15 Chris Demetriou <cgd@broadcom.com> |
| |
| * MAINTAINERS: Added self and Andrew for the mips sim. |
| |
| 2000-10-25 Geoff Keating <geoffk@cygnus.com> |
| |
| * MAINTAINERS: Added self and Andrew for the ppc sim. |
| |
| Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| From Stephane Carrez <Stephane.Carrez@worldnet.fr>: |
| * m68hc11: New directory. |
| * configure.in: Add. |
| * configure: Regenerate. |
| |
| Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * tic80: New directory. |
| * configure.in: Add configury. |
| * configure: Regenerate. |
| |
| 2000-04-20 Nick Clifton <nickc@cygnus.com> |
| |
| * configure.in (extra_subdirs): Add testsuite to strongarm |
| directories. |
| * configure: Regenerate. |
| |
| Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * MAINTAINERS: New file. Blank. |
| |
| 1999-11-18 Ben Elliston <bje@cygnus.com> |
| |
| * configure.in: Require autoconf 2.13 and remove obsolete |
| invocation of AC_C_CROSS. |
| * configure: Regenerate. |
| |
| 1999-09-29 Doug Evans <devans@casey.cygnus.com> |
| |
| * configure.in: Configure the testsuite directory for thumb. |
| * configure: Regenerate. |
| |
| 1999-07-16 Ben Elliston <bje@cygnus.com> |
| |
| * configure.in: Configure the testsuite directory for arm. |
| * configure: Regenerate. |
| |
| 1999-04-08 Nick Clifton <nickc@cygnus.com> |
| |
| * configure.in: Add support for MCore target. |
| * configure: Regenerate. |
| |
| 1999-03-14 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove |
| RUNTEST instead of commenting out, fixes portability problem. |
| |
| 1999-02-08 Nick Clifton <nickc@cygnus.com> |
| |
| * configure.in: Add support for StrongARM target. |
| * configure: Regenerate. |
| |
| 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com) |
| |
| * configure.in: Require autoconf 2.12.1 or higher. |
| |
| 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com> |
| |
| * configure.in (i960-*-*): Add. |
| * configure: Rebuild. |
| |
| Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com> |
| |
| * configure.in: Added case for fr30-*-*. |
| * configure: Regenerated. |
| |
| Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com> |
| |
| * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program |
| to allow successful operation on Windows. |
| |
| Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com> |
| |
| * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make |
| check can be invoked recursively. |
| |
| Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com> |
| |
| * configure.in: Build simulator on sparclite and sparc86x targets. |
| * configure: Regenerate. |
| |
| Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com> |
| |
| * Makefile.in (autoconf-common autoheader-common): Don't pass -l |
| to autoconf and autoheader. |
| |
| Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com> |
| |
| * Makefile.in (autoconf-common autoheader-common): Pass `-l |
| ../common' to autoconf and autoheader. Unconditionally run |
| autoconf in every subdir. |
| (autoconf-changelog autoheader-changelog): Unconditionally run |
| commands in every subdir. |
| (autoconf-install autoheader-install): Likewise. |
| |
| Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk> |
| |
| * Makefile.in: Get SHELL from configure. |
| * (FLAGS_TO_PASS): Pass down SHELL. |
| * configure: Regenerate with autoconf 2.12.1 to fix shell issues for |
| NT native builds. |
| |
| Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com> |
| |
| * configure.in (extra_subdirs): Enable igen for mn10300. |
| * configure: Re-generate. |
| |
| Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * configure.in (extra_subdirs): Add support for thumb target. |
| |
| * configure (extra_subdirs): Add support for thumb target. |
| |
| Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure.in (extra_subdirs): Add IGEN directory when MIPS |
| target. |
| * configure: Regenerate. |
| |
| Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure.in (extra_subdirs): v850ea needs igen. |
| * configure: Re-generate. |
| |
| Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure.in (testdir): When a testsuite directory, add that to |
| the list of confdirs. |
| |
| Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure.in (extra_subdirs): Enable igen ready for V850. |
| |
| Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure.in (w65-*-*, only_if_enabled): Set. |
| * configure: Re-generate. |
| |
| Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure.in (sparc*-*-*, only_if_enabled): Set |
| only_if_enabled=yes. Check only_if_enabled before enabling a |
| simulator. |
| * configure: Regenerate. |
| |
| Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * configure.in (extra_subdirs): Add v850e target. |
| |
| Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * configure.in (extra_subdirs): Add v850ea target. |
| |
| Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * configure.in (sparc*-*-*): Don't build erc32. |
| * configure: Regenerate. |
| |
| Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * configure.in (m32r-*-*): New target. |
| * configure: Regenerate. |
| |
| * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@. |
| |
| Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make |
| thought that .NOEXPORT was the default target. |
| |
| Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in (clean mostlyclean): Restore targets accidentally |
| deleted in earlier change. |
| |
| Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * Makefile.in (autoheader-common, autoheader-changelog, |
| autoheader-install): Perform autoheader in addition to autoconf. |
| |
| Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * Makefile.in (autoconf-install): New target. |
| (autoconf-changelog): Try different way to obtain user name. |
| |
| Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * Makefile.in (autoconf-changelog): New target, update |
| ChangeLog for all subdirectories - normally used after |
| autoconf-common target. |
| |
| Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * configure.in (extra_subdirs): Include testsuite for d30v. |
| * configure: Regenerate. |
| |
| * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from |
| ../gdb/Makefile.in |
| (check): New rules - drive the testsuite. |
| |
| Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * configure.in: Add mn10200 configure lines accidentally |
| removed. |
| * configure: Regenerated. |
| |
| Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com> |
| |
| * configure.in (extra_subdirs): Generalize common sub directory |
| into a list. |
| (extra_subdirs): For d30v add igen to the list to be built. |
| |
| Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com> |
| |
| * configure.in (d30v): New target. |
| * configure: Regenerated. |
| |
| Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * configure.in: Don't require GCC to build the mn10200 |
| simulator anymore. |
| * configure: Rebuilt. |
| |
| Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * configure.in: Don't configure any subdirs if no simulator |
| is being built. Don't use erc32 for sparc64. |
| * configure: Regenerated. |
| |
| Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * Makefile.in (autoconf-common): New target. |
| * configure.in: Do configure common. |
| * configure: Regenerated. |
| |
| Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * configure configure.in: Don't configure common anymore. Files |
| from common are now built in the individual simualtor directories. |
| This fixes problems with the WinGDB build procedure. |
| |
| Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * configure: Enable the mn10200 simulator. |
| |
| Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * configure.in (configdirs): Add common. |
| * configure: Regenerated. |
| |
| Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * configure.in (powerpc*-*-linux*): Treat like the other powerpc |
| system V based targets. |
| * configure: Regenerate. |
| |
| Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * configure.in (--enable-sim-powerpc): Delete. |
| (--enable-sim): Add. |
| * configure: Regenerated. |
| |
| Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * configure.in: Only build the V850 simulator if |
| we are using gcc. |
| * configure: Rebuild. |
| |
| Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Do build erc32 for DOS and Windows hosts. |
| * configure: Rebuild. |
| |
| Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * Makefile.in erc32/Makefile.in: Don't set srcroot. This should |
| be inherited from the parent. Remove INSTALL_XFORM and |
| INSTALL_XFORM1. Make INSTALL be set from configure. |
| |
| Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Only build the MIPS simulator if we are using |
| gcc. |
| * configure: Rebuild. |
| |
| Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * configure.in (v850-*-*): Added V850 simulator. |
| |
| Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * configure.in (d10v-*-*): Added D10V simulator. |
| |
| Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) |
| |
| * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir, |
| INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values. |
| (docdir): Removed. |
| * configure.in (AC_PREREQ): autoconf 2.5 or higher. |
| (AC_PROG_INSTALL): Added. |
| * configure: Rebuilt. |
| |
| Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Only configure erc32 if using gcc. |
| * configure: Rebuild. |
| |
| Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * configure.in (sim_target): Build PowerPC simulator for powerpc |
| System V.4, Solaris, and Elf targets. |
| * configure: Regenerate with autoconf 2.10. |
| |
| Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll> |
| |
| * configure.in: Only built erc32 simulator on Unix hosts as it |
| uses pseudo ttys. |
| * configure: Regenerated with autoconf 2.8. |
| |
| Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * erc32: Sparc simulator from the ESA. |
| |
| Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com> |
| |
| From: Miles Bader <miles@gnu.ai.mit.edu> |
| * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB. |
| * configure: Regenerate using autoconf. |
| |
| Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * Makefile.in (install): Fix typo. |
| |
| Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure: Regenerate with autoconf 2.7. |
| |
| * Makefile.in (all): Simplify. |
| (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop |
| as in the all target. |
| (distclean, maintainer-clean, realclean): Likewise. |
| (install): Likewise. |
| |
| Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (all): Remove extra '\' char from shell script. |
| |
| Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com> |
| |
| * Makefile.in (all): Avoid a for loop with zero elements, even if |
| the loop will not be executed because of an if statement. |
| |
| Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (install): Add missing semicolon in "fi \". |
| |
| Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up |
| defaults from configure. |
| |
| * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using |
| configure defaults. |
| (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets |
| if either --enable-sim-powerpc is used, or the host compiler is |
| GCC. |
| |
| Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk> |
| |
| * configure.in (mips*-*-*): Added "mips" simulator target. |
| * configure: Re-generated. |
| |
| Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (BISON): Remove macro. |
| (FLAGS_TO_PASS): Remove BISON. |
| |
| Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * configure.in: Explicitly `exit 0' for broken shells. |
| * configure: Rebuilt. |
| |
| Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com> |
| |
| * common/run.c (main): Initialize the callbacks. |
| |
| Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in (maintainer-clean): New synonym for realclean. |
| |
| Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * configure.in (powerpc*-*-eabisim*): Only build the simulator if |
| the target is powerpc*-*-eabisim*, since it requires GCC to build. |
| |
| Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney |
| <cagney@highland.com.au>. |
| * configure: Regnerate from configure.in. |
| |
| Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com> |
| |
| * Update all FSF addresses except those in COPYING* files. |
| |
| Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass |
| submakes either default or passed in value. |
| |
| Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * Makefile.in (all, clean, distclean, mostlyclean, realclean, |
| install): Changed targets so that they descend all |
| subdirectories in $(SUBDIRS). |
| (*-all, *-clean, *-install): Removed targets. |
| |
| * configure.in: Don't bother with target makefile fragments, they |
| are no longer needed. |
| * configure: regenerated. |
| |
| * Makefile.in, configure.in: converted to autoconf. |
| * configure: New file, generated with autconf 2.4. |
| |
| Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com> |
| |
| * Makefile.in: Support ARM. |
| * configure.in: Ditto. |
| |
| Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat> |
| |
| * Makefile.in: Support W65. |
| * configure.in: Ditto. |
| |
| Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Makefile.in: Add TAGS target. |
| |
| Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300, |
| install-h8300, clean-h8300, all-h8500, install-h8500, |
| clean-h8500, all-sh, install-sh, clean-sh): do not echo |
| recursion lines. |
| |
| Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com) |
| |
| * Makefile.in: remove endian.h trace from h8500 |
| |
| Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * Makefile.in: Add distclean, realclean, and mostlyclean targets. |
| |
| Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) |
| |
| * Makefile.in: make all of the all-* target (except all-nothing) |
| depend on endian.h, so that if we're not building a simulator, we |
| don't built endian |
| |
| Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * Makefile.in (check, installcheck): Added dummy targets. |
| |
| Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (endian): Find endian.c in $(srcdir), and also |
| explicitly make it, since some makes apparently don't work with |
| VPATH and .c to executable rules (SunOS make for example). |
| |
| Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * Makefile.in (endian): Add explicit rule for broken makes. |
| |
| Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * Makefile.in (info, install-info): New targets. |
| (DO_INSTALL): Renamed from INSTALL, which is overridden by the top |
| level Makefile. |
| |
| Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com) |
| |
| * Makefile.in (endian.h): build endian.h via a temporary file so |
| that we don't leave an incomplete file lying around on |
| interrupted builds. |
| (clean): remove endian, e.h, and endian.h. |
| |
| Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * Makefile.in, configure.in: if target isn't supported, build a |
| harmless makefile. |
| |
| |