| /* |
| *uncomment this if you want the linker to output srecords. |
| OUTPUT_FORMAT(srec) |
| * |
| */ |
| STARTUP(traps.o) |
| INPUT(sim-crt0.o) |
| OUTPUT_ARCH(sparc) |
| SEARCH_DIR(.) |
| __DYNAMIC = 0; |
| GROUP(-lc -lsim -lgcc) |
| |
| /* |
| * The memory map looks like this: |
| * +--------------------+ <- low memory |
| * | .text | |
| * | _stext | |
| * | _etext | |
| * | ctor list | the ctor and dtor lists are for |
| * | dtor list | C++ support |
| * | _end_text | |
| * +--------------------+ |
| * | .data | initialized data goes here |
| * | _sdata | |
| * | _edata | |
| * +--------------------+ |
| * | .bss | |
| * | __bss_start | start of bss, cleared by crt0 |
| * | _end | start of heap, used by sbrk() |
| * +--------------------+ |
| * | heap space | |
| * | _ENDHEAP | |
| * | stack space | |
| * | __stack | top of stack |
| * +--------------------+ <- high memory |
| */ |
| |
| /* |
| * User modifiable values: |
| * |
| * _CLOCK_SPEED in Mhz (used to program the counter/timers) |
| * |
| * _PROM_SIZE size of PROM (permissible values are 4K, 8K, 16K |
| * 32K, 64K, 128K, 256K, and 512K) |
| * _RAM_SIZE size of RAM (permissible values are 256K, 512K, |
| * 1MB, 2Mb, 4Mb, 8Mb, 16Mb, and 32Mb) |
| * |
| * These symbols are only used in assembler code, so they only need to |
| * be listed once. They should always be refered to without SYM(). |
| */ |
| |
| _CLOCK_SPEED = 10; |
| |
| _PROM_SIZE = 4M; |
| _RAM_SIZE = 2M; |
| |
| _RAM_START = 0x02020000; |
| _RAM_END = _RAM_START + _RAM_SIZE; |
| _STACK_SIZE = (16 * 1024); |
| _PROM_START = 0x00000000; |
| _PROM_END = _PROM_START + _PROM_SIZE; |
| |
| |
| /* |
| * Base address of the on-CPU peripherals |
| */ |
| |
| _ERC32_MEC = 0x01f80000; |
| |
| /* |
| * Setup the memory map for the SIS simulator. |
| * stack grows up towards low memory. |
| */ |
| /* |
| MEMORY |
| { |
| rom : ORIGIN = 0x00000000, LENGTH = 4M |
| ram (rwx) : ORIGIN = 0x02000000, LENGTH = 2M |
| } |
| */ |
| |
| __stack = _RAM_START + _RAM_SIZE - 4 * 16; |
| __trap_stack = (_RAM_START + _RAM_SIZE - 4 * 16) - _STACK_SIZE; |
| |
| /* |
| * All the symbols that might be accessed from C code need to be |
| * listed twice, once with an additional underscore. aout format needs |
| * and extra underscore, whereas coff & elf doesn't. This is to work |
| * with both. |
| */ |
| SECTIONS |
| { |
| .text 0x02000000 : { |
| stext = .; |
| _stext = .; |
| *(.text) |
| _etext = .; |
| __CTOR_LIST__ = .; |
| LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2) |
| *(.ctors) |
| LONG(0) |
| __CTOR_END__ = .; |
| __DTOR_LIST__ = .; |
| LONG((__DTOR_END__ - __DTOR_LIST__) / 4 - 2) |
| *(.dtors) |
| LONG(0) |
| __DTOR_END__ = .; |
| *(.lit) |
| *(.shdata) |
| _endtext = .; |
| } > ram |
| .shbss SIZEOF(.text) + ADDR(.text) : { |
| *(.shbss) |
| } |
| .talias : { } > ram |
| .data : { |
| sdata = .; |
| _sdata = .; |
| *(.data) |
| edata = .; |
| _edata = .; |
| } > ram |
| .bss SIZEOF(.data) + ADDR(.data) : |
| { |
| sbss = . ; |
| _sbss = . ; |
| __bss_start = ALIGN(0x8); |
| *(.bss) |
| *(COMMON) |
| end = ALIGN(0x8); |
| _end = ALIGN(0x8); |
| __end = ALIGN(0x8); |
| ebss = .; |
| _ebss = .; |
| } |
| .mstack : { } > ram |
| .rstack : { } > ram |
| .stab 0 (NOLOAD) : |
| { |
| [ .stab ] |
| } |
| .stabstr 0 (NOLOAD) : |
| { |
| [ .stabstr ] |
| } |
| } |