| # Makefile.in generated by automake 1.11.6 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software |
| # Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| |
| |
| VPATH = @srcdir@ |
| am__make_dryrun = \ |
| { \ |
| am__dry=no; \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ |
| | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ |
| *) \ |
| for am__flg in $$MAKEFLAGS; do \ |
| case $$am__flg in \ |
| *=*|--*) ;; \ |
| *n*) am__dry=yes; break;; \ |
| esac; \ |
| done;; \ |
| esac; \ |
| test $$am__dry = yes; \ |
| } |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| subdir = . |
| DIST_COMMON = NEWS README ChangeLog $(srcdir)/Makefile.in \ |
| $(srcdir)/Makefile.am $(top_srcdir)/configure \ |
| $(am__configure_deps) acconfig.h $(srcdir)/newlib.hin \ |
| $(srcdir)/../mkinstalldirs |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/../libtool.m4 \ |
| $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \ |
| $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \ |
| $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno config.status.lineno |
| mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs |
| CONFIG_HEADER = newlib.h |
| CONFIG_CLEAN_FILES = |
| CONFIG_CLEAN_VPATH_FILES = |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__uninstall_files_from_dir = { \ |
| test -z "$$files" \ |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| $(am__cd) "$$dir" && rm -f $$files; }; \ |
| } |
| am__installdirs = "$(DESTDIR)$(toollibdir)" "$(DESTDIR)$(toollibdir)" \ |
| "$(DESTDIR)$(toollibdir)" |
| LIBRARIES = $(toollib_LIBRARIES) |
| ARFLAGS = cru |
| libc_a_AR = $(AR) $(ARFLAGS) |
| libc_a_LIBADD = |
| libc_a_SOURCES = libc.c |
| libc_a_OBJECTS = libc.$(OBJEXT) |
| libm_a_AR = $(AR) $(ARFLAGS) |
| libm_a_LIBADD = |
| libm_a_SOURCES = libm.c |
| libm_a_OBJECTS = libm.$(OBJEXT) |
| LTLIBRARIES = $(toollib_LTLIBRARIES) |
| libc_la_LIBADD = |
| am_libc_la_OBJECTS = |
| libc_la_OBJECTS = $(am_libc_la_OBJECTS) |
| libc_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libc_la_LDFLAGS) \ |
| $(LDFLAGS) -o $@ |
| @USE_LIBTOOL_TRUE@am_libc_la_rpath = -rpath $(toollibdir) |
| libm_la_LIBADD = |
| am_libm_la_OBJECTS = |
| libm_la_OBJECTS = $(am_libm_la_OBJECTS) |
| libm_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libm_la_LDFLAGS) \ |
| $(LDFLAGS) -o $@ |
| @USE_LIBTOOL_TRUE@am_libm_la_rpath = -rpath $(toollibdir) |
| DEFAULT_INCLUDES = -I.@am__isrc@ |
| depcomp = |
| am__depfiles_maybe = |
| COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ |
| $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ |
| $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| CCLD = $(CC) |
| LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ |
| $(LDFLAGS) -o $@ |
| SOURCES = libc.c libm.c $(libc_la_SOURCES) $(libm_la_SOURCES) |
| RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| html-recursive info-recursive install-data-recursive \ |
| install-dvi-recursive install-exec-recursive \ |
| install-html-recursive install-info-recursive \ |
| install-pdf-recursive install-ps-recursive install-recursive \ |
| installcheck-recursive installdirs-recursive pdf-recursive \ |
| ps-recursive uninstall-recursive |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| DATA = $(noinst_DATA) $(toollib_DATA) |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ |
| $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS |
| ETAGS = etags |
| CTAGS = ctags |
| DEJATOOL = $(PACKAGE) |
| RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir |
| EXPECT = `if test -f $(top_builddir)/../expect/expect; then \ |
| echo $(top_builddir)/../expect/expect; \ |
| else \ |
| echo expect; \ |
| fi` |
| RUNTEST = `if test -f $(top_srcdir)/../dejagnu/runtest; then \ |
| echo $(top_srcdir)/../dejagnu/runtest; \ |
| else \ |
| echo runtest; \ |
| fi` |
| DIST_SUBDIRS = libc libm doc . @EXTRA_DIRS@ |
| ACLOCAL = @ACLOCAL@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AS = @AS@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| CC = @CC@ |
| CCAS = @CCAS@ |
| CCASFLAGS = @CCASFLAGS@ |
| CCDEPMODE = @CCDEPMODE@ |
| CC_FOR_BUILD = @CC_FOR_BUILD@ |
| CC_FOR_NEWLIB = @CC_FOR_NEWLIB@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CRT0 = @CRT0@ |
| CRT0_DIR = @CRT0_DIR@ |
| CRT1 = @CRT1@ |
| CRT1_DIR = @CRT1_DIR@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DLLTOOL = @DLLTOOL@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| EXTRA_DIRS = @EXTRA_DIRS@ |
| FGREP = @FGREP@ |
| GREP = @GREP@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBM_MACHINE_OBJECTLIST = @LIBM_MACHINE_OBJECTLIST@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MACHINE_OBJECTLIST = @MACHINE_OBJECTLIST@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MKDIR_P = @MKDIR_P@ |
| NEWLIB_CFLAGS = @NEWLIB_CFLAGS@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| NO_INCLUDE_LIST = @NO_INCLUDE_LIST@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| POSIX_OBJECTLIST = @POSIX_OBJECTLIST@ |
| RANLIB = @RANLIB@ |
| READELF = @READELF@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| SIGNAL_OBJECTLIST = @SIGNAL_OBJECTLIST@ |
| STDIO64_OBJECTLIST = @STDIO64_OBJECTLIST@ |
| STRIP = @STRIP@ |
| SYSCALL_OBJECTLIST = @SYSCALL_OBJECTLIST@ |
| SYS_MACH_OBJECTLIST = @SYS_MACH_OBJECTLIST@ |
| SYS_OBJECTLIST = @SYS_OBJECTLIST@ |
| UNIX_OBJECTLIST = @UNIX_OBJECTLIST@ |
| VERSION = @VERSION@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| aext = @aext@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libc_cv_cc_loop_to_function = @libc_cv_cc_loop_to_function@ |
| libc_cv_initfinit_array = @libc_cv_initfinit_array@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| libm_machine_dir = @libm_machine_dir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| lpfx = @lpfx@ |
| machine_dir = @machine_dir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| newlib_basedir = @newlib_basedir@ |
| oext = @oext@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| subdirs = @subdirs@ |
| sys_dir = @sys_dir@ |
| sysconfdir = @sysconfdir@ |
| target_alias = @target_alias@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| AUTOMAKE_OPTIONS = cygnus dejagnu |
| ACLOCAL_AMFLAGS = -I . -I .. |
| |
| # Multilib support variables. |
| MULTISRCTOP = |
| MULTIBUILDTOP = |
| MULTIDIRS = |
| MULTISUBDIR = |
| MULTIDO = true |
| MULTICLEAN = true |
| LIBTOOL_VERSION_INFO = 0:0:0 |
| @NEWLIB_HW_FP_FALSE@MATHDIR = math |
| |
| # The newlib hardware floating-point routines have been disabled due to |
| # inaccuracy. If you wish to work on them, you will need to edit the |
| # configure.in file to re-enable the configuration option. By default, |
| # the NEWLIB_HW_FP variable will always be false. |
| @NEWLIB_HW_FP_TRUE@MATHDIR = mathfp |
| |
| # Work around what appears to be a GNU make bug handling MAKEFLAGS |
| # values defined in terms of make variables, as is the case for CC and |
| # friends when we are called from the top level Makefile. |
| AM_MAKEFLAGS = \ |
| "AR_FLAGS=$(AR_FLAGS)" \ |
| "CC_FOR_BUILD=$(CC_FOR_BUILD)" \ |
| "CFLAGS=$(CFLAGS)" \ |
| "CCASFLAGS=$(CCASFLAGS)" \ |
| "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \ |
| "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \ |
| "INSTALL=$(INSTALL)" \ |
| "LDFLAGS=$(LDFLAGS)" \ |
| "LIBCFLAGS=$(LIBCFLAGS)" \ |
| "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \ |
| "MAKE=$(MAKE)" \ |
| "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \ |
| "PICFLAG=$(PICFLAG)" \ |
| "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \ |
| "SHELL=$(SHELL)" \ |
| "EXPECT=$(EXPECT)" \ |
| "RUNTEST=$(RUNTEST)" \ |
| "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ |
| "exec_prefix=$(exec_prefix)" \ |
| "infodir=$(infodir)" \ |
| "libdir=$(libdir)" \ |
| "prefix=$(prefix)" \ |
| "tooldir=$(tooldir)" \ |
| "top_toollibdir=$(toollibdir)" \ |
| "AR=$(AR)" \ |
| "AS=$(AS)" \ |
| "CC=$(CC_FOR_NEWLIB)" \ |
| "LD=$(LD)" \ |
| "LIBCFLAGS=$(LIBCFLAGS)" \ |
| "NM=$(NM)" \ |
| "PICFLAG=$(PICFLAG)" \ |
| "RANLIB=$(RANLIB)" \ |
| "DESTDIR=$(DESTDIR)" |
| |
| FLAGS_TO_PASS = $(AM_MAKEFLAGS) |
| @HAVE_DOC_FALSE@DOCDIR = |
| @HAVE_DOC_TRUE@DOCDIR = doc |
| SUBDIRS = libc libm \ |
| $(DOCDIR) . $(EXTRA_DIRS) |
| |
| tooldir = $(exec_prefix)/$(host_alias) |
| toollibdir = $(tooldir)/lib$(MULTISUBDIR) |
| AR_FLAGS = rc |
| @USE_LIBTOOL_TRUE@toollib_LTLIBRARIES = libm.la \ |
| @USE_LIBTOOL_TRUE@ libc.la |
| |
| @USE_LIBTOOL_FALSE@toollib_LIBRARIES = libm.a \ |
| @USE_LIBTOOL_FALSE@ libc.a |
| |
| noinst_DATA = stmp-targ-include |
| toollib_DATA = $(CRT0) $(CRT1) |
| |
| # The functions ldexp, frexp and modf are traditionally supplied in |
| # both libc.a and libm.a. We build them in libm.a and copy them over, |
| # along with some required supporting routines. |
| MATHOBJS_IN_LIBC = \ |
| $(lpfx)s_fpclassify.$(oext) $(lpfx)sf_fpclassify.$(oext) \ |
| $(lpfx)s_isinf.$(oext) $(lpfx)sf_isinf.$(oext) \ |
| $(lpfx)s_isnan.$(oext) $(lpfx)sf_isnan.$(oext) \ |
| $(lpfx)s_isinfd.$(oext) $(lpfx)sf_isinff.$(oext) \ |
| $(lpfx)s_isnand.$(oext) $(lpfx)sf_isnanf.$(oext) \ |
| $(lpfx)s_nan.$(oext) $(lpfx)sf_nan.$(oext) \ |
| $(lpfx)s_ldexp.$(oext) $(lpfx)sf_ldexp.$(oext) \ |
| $(lpfx)s_frexp.$(oext) $(lpfx)sf_frexp.$(oext) \ |
| $(lpfx)s_modf.$(oext) \ |
| $(lpfx)sf_modf.$(oext) $(lpfx)s_scalbn.$(oext) \ |
| $(lpfx)sf_scalbn.$(oext) \ |
| $(lpfx)s_finite.$(oext) $(lpfx)sf_finite.$(oext) \ |
| $(lpfx)s_copysign.$(oext) $(lpfx)sf_copysign.$(oext) \ |
| $(lpfx)s_infconst.$(oext) |
| |
| LIBC_OBJECTLISTS = \ |
| $(POSIX_OBJECTLIST) \ |
| $(SIGNAL_OBJECTLIST) \ |
| $(SYSCALL_OBJECTLIST) \ |
| $(UNIX_OBJECTLIST) \ |
| $(STDIO64_OBJECTLIST) \ |
| libc/argz/objectlist.awk.in \ |
| libc/stdlib/objectlist.awk.in \ |
| libc/time/objectlist.awk.in \ |
| libc/ctype/objectlist.awk.in \ |
| libc/search/objectlist.awk.in \ |
| libc/string/objectlist.awk.in \ |
| libc/locale/objectlist.awk.in \ |
| libc/misc/objectlist.awk.in \ |
| libc/reent/objectlist.awk.in \ |
| libc/errno/objectlist.awk.in \ |
| libc/stdio/objectlist.awk.in \ |
| $(MACHINE_OBJECTLIST) \ |
| $(SYS_OBJECTLIST) \ |
| $(SYS_MACH_OBJECTLIST) |
| |
| LIBM_OBJECTLISTS = \ |
| libm/$(MATHDIR)/objectlist.awk.in \ |
| libm/common/objectlist.awk.in \ |
| $(LIBM_MACHINE_OBJECTLIST) |
| |
| libm_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/libc/sys/linux/shared.ld -lgcc -objectlist libm-libtool-objectlist |
| libc_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/libc/sys/linux/shared.ld -lgcc -objectlist libc-libtool-objectlist |
| @USE_LIBTOOL_TRUE@libm_la_SOURCES = |
| @USE_LIBTOOL_TRUE@libm_la_DEPENDENCIES = libm-libtool-objectlist |
| @USE_LIBTOOL_TRUE@libc_la_SOURCES = |
| @USE_LIBTOOL_TRUE@libc_la_DEPENDENCIES = libc-libtool-objectlist |
| CLEANFILES = stmp-targ-include |
| CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host |
| MAKEOVERRIDES = |
| |
| # dejagnu support |
| RUNTESTFLAGS = |
| all: newlib.h |
| $(MAKE) $(AM_MAKEFLAGS) all-recursive |
| |
| .SUFFIXES: |
| .SUFFIXES: .c .lo .o .obj |
| am--refresh: Makefile |
| @: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --cygnus'; \ |
| $(am__cd) $(srcdir) && $(AUTOMAKE) --cygnus \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --cygnus Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| $(am__cd) $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| $(am__aclocal_m4_deps): |
| |
| newlib.h: stamp-h1 |
| @if test ! -f $@; then rm -f stamp-h1; else :; fi |
| @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi |
| |
| stamp-h1: $(srcdir)/newlib.hin $(top_builddir)/config.status |
| @rm -f stamp-h1 |
| cd $(top_builddir) && $(SHELL) ./config.status newlib.h |
| |
| distclean-hdr: |
| -rm -f newlib.h stamp-h1 |
| install-toollibLIBRARIES: $(toollib_LIBRARIES) |
| @$(NORMAL_INSTALL) |
| @list='$(toollib_LIBRARIES)'; test -n "$(toollibdir)" || list=; \ |
| list2=; for p in $$list; do \ |
| if test -f $$p; then \ |
| list2="$$list2 $$p"; \ |
| else :; fi; \ |
| done; \ |
| test -z "$$list2" || { \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(toollibdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(toollibdir)" || exit 1; \ |
| echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(toollibdir)'"; \ |
| $(INSTALL_DATA) $$list2 "$(DESTDIR)$(toollibdir)" || exit $$?; } |
| @$(POST_INSTALL) |
| @list='$(toollib_LIBRARIES)'; test -n "$(toollibdir)" || list=; \ |
| for p in $$list; do \ |
| if test -f $$p; then \ |
| $(am__strip_dir) \ |
| echo " ( cd '$(DESTDIR)$(toollibdir)' && $(RANLIB) $$f )"; \ |
| ( cd "$(DESTDIR)$(toollibdir)" && $(RANLIB) $$f ) || exit $$?; \ |
| else :; fi; \ |
| done |
| |
| uninstall-toollibLIBRARIES: |
| @$(NORMAL_UNINSTALL) |
| @list='$(toollib_LIBRARIES)'; test -n "$(toollibdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(toollibdir)'; $(am__uninstall_files_from_dir) |
| |
| clean-toollibLIBRARIES: |
| -test -z "$(toollib_LIBRARIES)" || rm -f $(toollib_LIBRARIES) |
| @USE_LIBTOOL_TRUE@libc.a: $(libc_a_OBJECTS) $(libc_a_DEPENDENCIES) $(EXTRA_libc_a_DEPENDENCIES) |
| @USE_LIBTOOL_TRUE@ -rm -f libc.a |
| @USE_LIBTOOL_TRUE@ $(libc_a_AR) libc.a $(libc_a_OBJECTS) $(libc_a_LIBADD) |
| @USE_LIBTOOL_TRUE@ $(RANLIB) libc.a |
| @USE_LIBTOOL_TRUE@libm.a: $(libm_a_OBJECTS) $(libm_a_DEPENDENCIES) $(EXTRA_libm_a_DEPENDENCIES) |
| @USE_LIBTOOL_TRUE@ -rm -f libm.a |
| @USE_LIBTOOL_TRUE@ $(libm_a_AR) libm.a $(libm_a_OBJECTS) $(libm_a_LIBADD) |
| @USE_LIBTOOL_TRUE@ $(RANLIB) libm.a |
| install-toollibLTLIBRARIES: $(toollib_LTLIBRARIES) |
| @$(NORMAL_INSTALL) |
| @list='$(toollib_LTLIBRARIES)'; test -n "$(toollibdir)" || list=; \ |
| list2=; for p in $$list; do \ |
| if test -f $$p; then \ |
| list2="$$list2 $$p"; \ |
| else :; fi; \ |
| done; \ |
| test -z "$$list2" || { \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(toollibdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(toollibdir)" || exit 1; \ |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toollibdir)'"; \ |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toollibdir)"; \ |
| } |
| |
| uninstall-toollibLTLIBRARIES: |
| @$(NORMAL_UNINSTALL) |
| @list='$(toollib_LTLIBRARIES)'; test -n "$(toollibdir)" || list=; \ |
| for p in $$list; do \ |
| $(am__strip_dir) \ |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toollibdir)/$$f'"; \ |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toollibdir)/$$f"; \ |
| done |
| |
| clean-toollibLTLIBRARIES: |
| -test -z "$(toollib_LTLIBRARIES)" || rm -f $(toollib_LTLIBRARIES) |
| @list='$(toollib_LTLIBRARIES)'; for p in $$list; do \ |
| dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ |
| test "$$dir" != "$$p" || dir=.; \ |
| echo "rm -f \"$${dir}/so_locations\""; \ |
| rm -f "$${dir}/so_locations"; \ |
| done |
| libc.la: $(libc_la_OBJECTS) $(libc_la_DEPENDENCIES) $(EXTRA_libc_la_DEPENDENCIES) |
| $(libc_la_LINK) $(am_libc_la_rpath) $(libc_la_OBJECTS) $(libc_la_LIBADD) $(LIBS) |
| libm.la: $(libm_la_OBJECTS) $(libm_la_DEPENDENCIES) $(EXTRA_libm_la_DEPENDENCIES) |
| $(libm_la_LINK) $(am_libm_la_rpath) $(libm_la_OBJECTS) $(libm_la_LIBADD) $(LIBS) |
| |
| mostlyclean-compile: |
| -rm -f *.$(OBJEXT) |
| |
| distclean-compile: |
| -rm -f *.tab.c |
| |
| .c.o: |
| $(COMPILE) -c $< |
| |
| .c.obj: |
| $(COMPILE) -c `$(CYGPATH_W) '$<'` |
| |
| .c.lo: |
| $(LTCOMPILE) -c -o $@ $< |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool config.lt |
| install-toollibDATA: $(toollib_DATA) |
| @$(NORMAL_INSTALL) |
| @list='$(toollib_DATA)'; test -n "$(toollibdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(toollibdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(toollibdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(toollibdir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(toollibdir)" || exit $$?; \ |
| done |
| |
| uninstall-toollibDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(toollib_DATA)'; test -n "$(toollibdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(toollibdir)'; $(am__uninstall_files_from_dir) |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @fail= failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| $(RECURSIVE_CLEAN_TARGETS): |
| @fail= failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) newlib.hin $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| set x; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) newlib.hin $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) newlib.hin $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| list='$(SOURCES) $(HEADERS) newlib.hin $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| distclean-DEJAGNU: |
| -rm -f site.exp site.bak |
| -l='$(DEJATOOL)'; for tool in $$l; do \ |
| rm -f $$tool.sum $$tool.log; \ |
| done |
| check-am: |
| $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU |
| check: check-recursive |
| all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA) newlib.h |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(toollibdir)" "$(DESTDIR)$(toollibdir)" "$(DESTDIR)$(toollibdir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool clean-local \ |
| clean-toollibLIBRARIES clean-toollibLTLIBRARIES mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-DEJAGNU distclean-compile \ |
| distclean-generic distclean-hdr distclean-libtool \ |
| distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| html-am: |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-data-local install-toollibDATA \ |
| install-toollibLIBRARIES install-toollibLTLIBRARIES |
| |
| install-dvi: install-dvi-recursive |
| |
| install-dvi-am: |
| |
| install-exec-am: |
| |
| install-html: install-html-recursive |
| |
| install-html-am: |
| |
| install-info: install-info-recursive |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-recursive |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-recursive |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-compile mostlyclean-generic \ |
| mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-toollibDATA uninstall-toollibLIBRARIES \ |
| uninstall-toollibLTLIBRARIES |
| |
| .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check-am \ |
| ctags-recursive install-am install-strip tags-recursive |
| |
| .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ |
| all all-am am--refresh check check-DEJAGNU check-am clean \ |
| clean-generic clean-libtool clean-local clean-toollibLIBRARIES \ |
| clean-toollibLTLIBRARIES ctags ctags-recursive distclean \ |
| distclean-DEJAGNU distclean-compile distclean-generic \ |
| distclean-hdr distclean-libtool distclean-tags dvi dvi-am html \ |
| html-am info info-am install install-am install-data \ |
| install-data-am install-data-local install-dvi install-dvi-am \ |
| install-exec install-exec-am install-html install-html-am \ |
| install-info install-info-am install-man install-pdf \ |
| install-pdf-am install-ps install-ps-am install-strip \ |
| install-toollibDATA install-toollibLIBRARIES \ |
| install-toollibLTLIBRARIES installcheck installcheck-am \ |
| installdirs installdirs-am maintainer-clean \ |
| maintainer-clean-generic mostlyclean mostlyclean-compile \ |
| mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ |
| tags tags-recursive uninstall uninstall-am \ |
| uninstall-toollibDATA uninstall-toollibLIBRARIES \ |
| uninstall-toollibLTLIBRARIES |
| |
| |
| # objects listed later in LIBM_OBJECTLISTS will override those listed earlier |
| @USE_LIBTOOL_TRUE@libm-libtool-objectlist: $(LIBM_OBJECTLISTS) |
| @USE_LIBTOOL_TRUE@ cat $(LIBM_OBJECTLISTS) | $(AWK) '{ libm[$$1] = $$2 }; END { for (x in libm) printf ("%s\n", libm[x]) }' > $@ |
| |
| # objects listed later in LIBM_OBJECTLISTS and LIBC_OBJECTLISTS will override those listed earlier |
| @USE_LIBTOOL_TRUE@libc-libtool-objectlist: $(LIBM_OBJECTLISTS) $(LIBC_OBJECTLISTS) |
| @USE_LIBTOOL_TRUE@ cat $(LIBM_OBJECTLISTS) $(LIBC_OBJECTLISTS) | $(AWK) '{ libc[$$1] = $$2 }; END { for (x in libc) printf ("%s\n", libc[x]) }' > $@ |
| |
| @USE_LIBTOOL_FALSE@libc.a: libc/libc.a libm.a |
| @USE_LIBTOOL_FALSE@ rm -rf libc.a libg.a tmp |
| @USE_LIBTOOL_FALSE@ mkdir tmp |
| @USE_LIBTOOL_FALSE@ cd tmp; \ |
| @USE_LIBTOOL_FALSE@ $(AR) x ../libm.a $(MATHOBJS_IN_LIBC) ; \ |
| @USE_LIBTOOL_FALSE@ $(AR) x ../libc/libc.a ; \ |
| @USE_LIBTOOL_FALSE@ $(AR) $(AR_FLAGS) ../$@ *.o |
| @USE_LIBTOOL_FALSE@ $(RANLIB) libc.a |
| @USE_LIBTOOL_FALSE@ ln libc.a libg.a >/dev/null 2>/dev/null || cp libc.a libg.a |
| @USE_LIBTOOL_FALSE@ rm -rf tmp |
| |
| @USE_LIBTOOL_FALSE@libc/libc.a: ; @true |
| |
| @USE_LIBTOOL_FALSE@libm.a: libm/libm.a |
| @USE_LIBTOOL_FALSE@ rm -f $@ |
| @USE_LIBTOOL_FALSE@ ln libm/libm.a $@ >/dev/null 2>/dev/null || cp libm/libm.a $@ |
| |
| @USE_LIBTOOL_FALSE@libm/libm.a: ; @true |
| |
| crt0.o: $(CRT0_DIR)$(CRT0) |
| rm -f $@ |
| ln $(CRT0_DIR)$(CRT0) $@ >/dev/null 2>/dev/null \ |
| || cp $(CRT0_DIR)$(CRT0) $@ |
| |
| $(CRT0_DIR)$(CRT0): ; @true |
| |
| crt1.o: $(CRT1_DIR)$(CRT1) |
| rm -f $@ |
| ln $< $@ >/dev/null 2>/dev/null \ |
| || cp $< $@ |
| |
| $(CRT1_DIR)$(CRT1): ; @true |
| |
| $(srcdir)/newlib.hin: |
| |
| all-recursive: stmp-targ-include |
| |
| # The targ-include directory just holds the includes files for the |
| # particular system and machine we have been configured for. It is |
| # used while building. |
| stmp-targ-include: config.status |
| -rm -rf targ-include stmp-targ-include |
| mkdir targ-include targ-include/sys targ-include/machine targ-include/bits |
| cp newlib.h targ-include/newlib.h |
| -for i in $(srcdir)/libc/machine/$(machine_dir)/machine/*.h; do \ |
| if [ -f $$i ]; then \ |
| cp $$i targ-include/machine/`basename $$i`; \ |
| else true; fi ; \ |
| done |
| -for i in $(srcdir)/libc/machine/$(machine_dir)/sys/*.h; do \ |
| if [ -f $$i ]; then \ |
| cp $$i targ-include/sys/`basename $$i`; \ |
| else true; fi ; \ |
| done |
| -for i in $(srcdir)/libc/machine/$(machine_dir)/include/*.h; do \ |
| if [ -f $$i ]; then \ |
| cp $$i targ-include/`basename $$i`; \ |
| else true; fi ; \ |
| done |
| -for i in $(srcdir)/libc/sys/$(sys_dir)/include/*.h; do \ |
| if [ -f $$i ]; then \ |
| cp $$i targ-include/`basename $$i`; \ |
| else true; fi ; \ |
| done |
| -for i in $(srcdir)/libc/sys/$(sys_dir)/include/*; do \ |
| if [ -d $$i ]; then \ |
| for j in $$i/*.h; do \ |
| if [ ! -d targ-include/`basename $$i` ]; then \ |
| mkdir targ-include/`basename $$i`; \ |
| fi; \ |
| cp $$j targ-include/`basename $$i`/`basename $$j`; \ |
| done \ |
| else true; fi ; \ |
| done |
| -for i in $(srcdir)/libc/sys/$(sys_dir)/sys/*.h; do \ |
| if [ -f $$i ]; then \ |
| cp $$i targ-include/sys/`basename $$i`; \ |
| else true; fi ; \ |
| done |
| -for i in $(srcdir)/libc/sys/$(sys_dir)/bits/*.h; do \ |
| if [ -f $$i ]; then \ |
| cp $$i targ-include/bits/`basename $$i`; \ |
| else true; fi ; \ |
| done |
| -for i in $(srcdir)/libc/sys/$(sys_dir)/machine/*.h; do \ |
| if [ -f $$i ]; then \ |
| cp $$i targ-include/machine/`basename $$i`; \ |
| else true; fi ; \ |
| done |
| -for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/*.h; do \ |
| if [ -f $$i ]; then \ |
| cp $$i targ-include/machine/`basename $$i`; \ |
| else true; fi ; \ |
| done |
| -for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/include/*.h; do \ |
| if [ -f $$i ]; then \ |
| cp $$i targ-include/machine/`basename $$i`; \ |
| else true; fi ; \ |
| done |
| touch $@ |
| |
| install-data-local: install-toollibLIBRARIES |
| @USE_LIBTOOL_FALSE@ rm -f $(DESTDIR)$(toollibdir)/libg.a |
| @USE_LIBTOOL_FALSE@ ln $(DESTDIR)$(toollibdir)/libc.a $(DESTDIR)$(toollibdir)/libg.a >/dev/null 2>/dev/null || cp $(DESTDIR)$(toollibdir)/libc.a $(DESTDIR)$(toollibdir)/libg.a |
| $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE) |
| -if [ -z "$(MULTISUBDIR)" ]; then \ |
| $(mkinstalldirs) $(DESTDIR)$(tooldir)/include; \ |
| for i in $(srcdir)/libc/include/*.h; do \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \ |
| done; \ |
| $(INSTALL_DATA) newlib.h $(DESTDIR)$(tooldir)/include/newlib.h; \ |
| $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/machine; \ |
| for i in $(srcdir)/libc/include/machine/*.h; do \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \ |
| done; \ |
| for i in $(srcdir)/libc/machine/$(machine_dir)/machine/*.h; do \ |
| if [ -f $$i ]; then \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \ |
| else true; fi ; \ |
| done; \ |
| $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/rpc; \ |
| for i in $(srcdir)/libc/include/rpc/*.h; do \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/rpc/`basename $$i`; \ |
| done; \ |
| $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/sys; \ |
| for i in $(srcdir)/libc/include/sys/*.h; do \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \ |
| done; \ |
| for i in $(srcdir)/libc/machine/$(machine_dir)/sys/*.h; do \ |
| if [ -f $$i ]; then \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \ |
| else true; fi ; \ |
| done ; \ |
| for i in $(srcdir)/libc/machine/$(machine_dir)/include/*.h; do \ |
| if [ -f $$i ]; then \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \ |
| else true; fi ; \ |
| done ; \ |
| for i in $(srcdir)/libc/sys/$(sys_dir)/sys/*.h; do \ |
| if [ -f $$i ]; then \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \ |
| else true; fi ; \ |
| done ; \ |
| $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/bits; \ |
| for i in $(srcdir)/libc/sys/$(sys_dir)/bits/*.h; do \ |
| if [ -f $$i ]; then \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/bits/`basename $$i`; \ |
| else true; fi ; \ |
| done ; \ |
| for i in $(srcdir)/libc/sys/$(sys_dir)/machine/*.h; do \ |
| if [ -f $$i ]; then \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \ |
| else true; fi ; \ |
| done ; \ |
| for i in $(srcdir)/libc/sys/$(sys_dir)/include/*.h; do \ |
| if [ -f $$i ]; then \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \ |
| else true; fi ; \ |
| done ; \ |
| for i in $(srcdir)/libc/sys/$(sys_dir)/include/*; do \ |
| if [ -d $$i ]; then \ |
| for j in $$i/*.h; do \ |
| $(INSTALL_DATA) $$j $(DESTDIR)$(tooldir)/include/`basename $$i`/`basename $$j`; \ |
| done ; \ |
| else true; fi ; \ |
| done ; \ |
| for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/include/*.h; do \ |
| if [ -f $$i ]; then \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \ |
| else true; fi ; \ |
| done ; \ |
| for i in $(NO_INCLUDE_LIST); do \ |
| if [ -f $(DESTDIR)$(tooldir)/include/$$i ]; then \ |
| rm $(DESTDIR)$(tooldir)/include/$$i; \ |
| else true; fi ; \ |
| done ; \ |
| else true; fi |
| |
| # Force makedoc to be built before building info files. |
| info-recursive: doc/makedoc |
| dvi-recursive: doc/makedoc |
| doc/makedoc: |
| cd doc && $(MAKE) all |
| |
| # Multilib support. |
| .PHONY: all-multi check-multi mostlyclean-multi clean-multi distclean-multi \ |
| maintainer-clean-multi |
| |
| all-recursive: all-multi |
| check-recursive: check-multi |
| mostlyclean-recursive: mostlyclean-multi |
| clean-recursive: clean-multi |
| distclean-recursive: distclean-multi |
| maintainer-clean-recursive: maintainer-clean-multi |
| |
| # The $(MAKE) comments below are to enable parallel building. |
| all-multi: |
| $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE) |
| check-multi: |
| $(MULTIDO) $(AM_MAKEFLAGS) DO=check multi-do # $(MAKE) |
| mostlyclean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE) |
| clean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE) |
| distclean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE) |
| maintainer-clean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE) |
| |
| site.exp: Makefile |
| @echo 'Making a new site.exp file...' |
| @test ! -f site.bak || rm -f site.bak |
| @echo '## these variables are automatically generated by make ##' > $@-t |
| @echo '# Do not edit here. If you wish to override these values' >> $@-t |
| @echo '# edit the last section' >> $@-t |
| @echo 'set tool $(DEJATOOL)' >> $@-t |
| @echo 'set tool_version $(VERSION)' >> $@-t |
| @echo 'set srcdir $(srcdir)/testsuite' >> $@-t |
| @echo 'set objdir' `pwd` >> $@-t |
| @echo 'set tmpdir' `pwd`/testsuite >> $@-t |
| @echo 'set multibuildtop ./$(MULTIBUILDTOP)' >> $@-t |
| @echo 'set host_alias $(build_alias)' >> $@-t |
| @echo 'set host_triplet $(build_triplet)' >> $@-t |
| @echo 'set target_alias $(host_alias)' >> $@-t |
| @echo 'set target_triplet $(host_triplet)' >> $@-t |
| @echo '## All variables above are generated by configure. Do Not Edit ##' >> $@-t |
| @test ! -f site.exp || sed '1,/^## All variables above are.*##/ d' site.exp >> $@-t |
| @test ! -f site.exp || mv site.exp site.bak |
| @mv $@-t site.exp |
| |
| check-DEJAGNU: site.exp |
| @if [ -d testsuite ] ; then \ |
| true ; \ |
| else \ |
| mkdir testsuite ; \ |
| fi |
| @rm -f testsuite/site.exp |
| @cp site.exp testsuite/site.exp |
| @rootme=`pwd` ; \ |
| export rootme ; \ |
| srcdir=`cd ${srcdir}; pwd` ; \ |
| export srcdir ; \ |
| EXPECT=`if [ -f $${rootme}/${MULTIBUILDTOP}../../expect/expect ] ; then \ |
| echo $${rootme}/${MULTIBUILDTOP}../../expect/expect ; \ |
| else \ |
| echo expect ; \ |
| fi` ; \ |
| export EXPECT ; \ |
| echo "Found expect: $${EXPECT}" ; \ |
| if [ -f $(top_builddir)/$(MULTIBUILDTOP)../../expect/expect ] ; then \ |
| TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd` ; \ |
| export TCL_LIBRARY ; \ |
| echo "Found TCL library directory: $${TCL_LIBRARY}" ; \ |
| fi ; \ |
| RUNTEST=`if [ -f $${srcdir}/../dejagnu/runtest ] ; then \ |
| echo $${srcdir}/../dejagnu/runtest ; \ |
| else \ |
| echo runtest ; \ |
| fi` ; \ |
| export RUNTEST ; \ |
| echo "Found runtest: $${RUNTEST}" ; \ |
| cd testsuite ; \ |
| if $(SHELL) -c "$$RUNTEST --version" > /dev/null 2>&1 ; then \ |
| $$RUNTEST --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite $(RUNTESTFLAGS) ; \ |
| : ; \ |
| else \ |
| echo "WARNING: could not find \`runtest'" 1>&2 ; \ |
| fi |
| |
| clean-local: |
| -rm -rf targ-include |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
