| /* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ |
| /* ***** BEGIN LICENSE BLOCK ***** |
| * Version: MPL 1.1/GPL 2.0/LGPL 2.1 |
| * |
| * The contents of this file are subject to the Mozilla Public License Version |
| * 1.1 (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * http://www.mozilla.org/MPL/ |
| * |
| * Software distributed under the License is distributed on an "AS IS" basis, |
| * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License |
| * for the specific language governing rights and limitations under the |
| * License. |
| * |
| * The Original Code is Mozilla Communicator client code, released |
| * March 31, 1998. |
| * |
| * The Initial Developer of the Original Code is |
| * Netscape Communications Corporation. |
| * Portions created by the Initial Developer are Copyright (C) 1998 |
| * the Initial Developer. All Rights Reserved. |
| * |
| * Contributor(s): |
| * |
| * Alternatively, the contents of this file may be used under the terms of |
| * either the GNU General Public License Version 2 or later (the "GPL"), or |
| * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), |
| * in which case the provisions of the GPL or the LGPL are applicable instead |
| * of those above. If you wish to allow use of your version of this file only |
| * under the terms of either the GPL or the LGPL, and not to allow others to |
| * use your version of this file under the terms of the MPL, indicate your |
| * decision by deleting the provisions above and replace them with the notice |
| * and other provisions required by the GPL or the LGPL. If you do not delete |
| * the provisions above, a recipient may use your version of this file under |
| * the terms of any one of the MPL, the GPL or the LGPL. |
| * |
| * ***** END LICENSE BLOCK ***** */ |
| |
| gTestfile = '15.4.5.1-2.js'; |
| |
| /** |
| File Name: 15.4.5.1-2.js |
| ECMA Section: [[ Put]] (P, V) |
| Description: |
| Array objects use a variation of the [[Put]] method used for other native |
| ECMAScript objects (section 8.6.2.2). |
| |
| Assume A is an Array object and P is a string. |
| |
| When the [[Put]] method of A is called with property P and value V, the |
| following steps are taken: |
| |
| 1. Call the [[CanPut]] method of A with name P. |
| 2. If Result(1) is false, return. |
| 3. If A doesn't have a property with name P, go to step 7. |
| 4. If P is "length", go to step 12. |
| 5. Set the value of property P of A to V. |
| 6. Go to step 8. |
| 7. Create a property with name P, set its value to V and give it empty |
| attributes. |
| 8. If P is not an array index, return. |
| 9. If A itself has a property (not an inherited property) named "length", |
| andToUint32(P) is less than the value of the length property of A, then |
| return. |
| 10. Change (or set) the value of the length property of A to ToUint32(P)+1. |
| 11. Return. |
| 12. Compute ToUint32(V). |
| 13. For every integer k that is less than the value of the length property |
| of A but not less than Result(12), if A itself has a property (not an |
| inherited property) named ToString(k), then delete that property. |
| 14. Set the value of property P of A to Result(12). |
| 15. Return. |
| |
| |
| These are gTestcases from Waldemar, detailed in |
| http://scopus.mcom.com/bugsplat/show_bug.cgi?id=123552 |
| |
| Author: christine@netscape.com |
| Date: 15 June 1998 |
| */ |
| |
| var SECTION = "15.4.5.1-2"; |
| var VERSION = "ECMA_1"; |
| startTest(); |
| var TITLE = "Array [[Put]] (P,V)"; |
| |
| writeHeaderToLog( SECTION + " "+ TITLE); |
| |
| var a = new Array(); |
| |
| AddCase( "3.00", "three" ); |
| AddCase( "00010", "eight" ); |
| AddCase( "37xyz", "thirty-five" ); |
| AddCase("5000000000", 5) |
| AddCase( "-2", -3 ); |
| |
| new TestCase( SECTION, |
| "a[10]", |
| void 0, |
| a[10] ); |
| |
| new TestCase( SECTION, |
| "a[3]", |
| void 0, |
| a[3] ); |
| |
| a[4] = "four"; |
| |
| new TestCase( SECTION, |
| "a[4] = \"four\"; a[4]", |
| "four", |
| a[4] ); |
| |
| new TestCase( SECTION, |
| "a[\"4\"]", |
| "four", |
| a["4"] ); |
| |
| new TestCase( SECTION, |
| "a[\"4.00\"]", |
| void 0, |
| a["4.00"] ); |
| |
| new TestCase( SECTION, |
| "a.length", |
| 5, |
| a.length ); |
| |
| |
| a["5000000000"] = 5; |
| |
| new TestCase( SECTION, |
| "a[\"5000000000\"] = 5; a.length", |
| 5, |
| a.length ); |
| |
| new TestCase( SECTION, |
| "a[\"-2\"] = -3; a.length", |
| 5, |
| a.length ); |
| |
| test(); |
| |
| function AddCase ( arg, value ) { |
| |
| a[arg] = value; |
| |
| new TestCase( SECTION, |
| "a[\"" + arg + "\"] = "+ value +"; a.length", |
| 0, |
| a.length ); |
| } |