| /* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ |
| /* ***** BEGIN LICENSE BLOCK ***** |
| * Version: MPL 1.1/GPL 2.0/LGPL 2.1 |
| * |
| * The contents of this file are subject to the Mozilla Public License Version |
| * 1.1 (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * http://www.mozilla.org/MPL/ |
| * |
| * Software distributed under the License is distributed on an "AS IS" basis, |
| * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License |
| * for the specific language governing rights and limitations under the |
| * License. |
| * |
| * The Original Code is Mozilla Communicator client code, released |
| * March 31, 1998. |
| * |
| * The Initial Developer of the Original Code is |
| * Netscape Communications Corporation. |
| * Portions created by the Initial Developer are Copyright (C) 1998 |
| * the Initial Developer. All Rights Reserved. |
| * |
| * Contributor(s): |
| * |
| * Alternatively, the contents of this file may be used under the terms of |
| * either the GNU General Public License Version 2 or later (the "GPL"), or |
| * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), |
| * in which case the provisions of the GPL or the LGPL are applicable instead |
| * of those above. If you wish to allow use of your version of this file only |
| * under the terms of either the GPL or the LGPL, and not to allow others to |
| * use your version of this file under the terms of the MPL, indicate your |
| * decision by deleting the provisions above and replace them with the notice |
| * and other provisions required by the GPL or the LGPL. If you do not delete |
| * the provisions above, a recipient may use your version of this file under |
| * the terms of any one of the MPL, the GPL or the LGPL. |
| * |
| * ***** END LICENSE BLOCK ***** */ |
| |
| gTestfile = '11.13.2-1.js'; |
| |
| /** |
| File Name: 11.13.2-1.js |
| ECMA Section: 11.13.2 Compound Assignment: *= |
| Description: |
| |
| *= /= %= += -= <<= >>= >>>= &= ^= |= |
| |
| 11.13.2 Compound assignment ( op= ) |
| |
| The production AssignmentExpression : |
| LeftHandSideExpression @ = AssignmentExpression, where @ represents one of |
| the operators indicated above, is evaluated as follows: |
| |
| 1. Evaluate LeftHandSideExpression. |
| 2. Call GetValue(Result(1)). |
| 3. Evaluate AssignmentExpression. |
| 4. Call GetValue(Result(3)). |
| 5. Apply operator @ to Result(2) and Result(4). |
| 6. Call PutValue(Result(1), Result(5)). |
| 7. Return Result(5). |
| |
| Author: christine@netscape.com |
| Date: 12 november 1997 |
| */ |
| var SECTION = "11.13.2-1"; |
| var VERSION = "ECMA_1"; |
| startTest(); |
| |
| writeHeaderToLog( SECTION + " Compound Assignment: *="); |
| |
| |
| // NaN cases |
| |
| new TestCase( SECTION, |
| "VAR1 = NaN; VAR2=1; VAR1 *= VAR2", |
| Number.NaN, |
| eval("VAR1 = Number.NaN; VAR2=1; VAR1 *= VAR2") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = NaN; VAR2=1; VAR1 *= VAR2; VAR1", |
| Number.NaN, |
| eval("VAR1 = Number.NaN; VAR2=1; VAR1 *= VAR2; VAR1") ); |
| |
| // number cases |
| new TestCase( SECTION, |
| "VAR1 = 0; VAR2=1; VAR1 *= VAR2", |
| 0, |
| eval("VAR1 = 0; VAR2=1; VAR1 *= VAR2") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = 0; VAR2=1; VAR1 *= VAR2;VAR1", |
| 0, |
| eval("VAR1 = 0; VAR2=1; VAR1 *= VAR2;VAR1") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = 0xFF; VAR2 = 0xA, VAR1 *= VAR2", |
| 2550, |
| eval("VAR1 = 0XFF; VAR2 = 0XA, VAR1 *= VAR2") ); |
| |
| // special multiplication cases |
| |
| new TestCase( SECTION, |
| "VAR1 = 0; VAR2= Infinity; VAR1 *= VAR2", |
| Number.NaN, |
| eval("VAR1 = 0; VAR2 = Number.POSITIVE_INFINITY; VAR1 *= VAR2; VAR1") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = -0; VAR2= Infinity; VAR1 *= VAR2", |
| Number.NaN, |
| eval("VAR1 = -0; VAR2 = Number.POSITIVE_INFINITY; VAR1 *= VAR2; VAR1") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = -0; VAR2= -Infinity; VAR1 *= VAR2", |
| Number.NaN, |
| eval("VAR1 = -0; VAR2 = Number.NEGATIVE_INFINITY; VAR1 *= VAR2; VAR1") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = 0; VAR2= -Infinity; VAR1 *= VAR2", |
| Number.NaN, |
| eval("VAR1 = 0; VAR2 = Number.NEGATIVE_INFINITY; VAR1 *= VAR2; VAR1") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = 0; VAR2= Infinity; VAR2 *= VAR1", |
| Number.NaN, |
| eval("VAR1 = 0; VAR2 = Number.POSITIVE_INFINITY; VAR2 *= VAR1; VAR2") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = -0; VAR2= Infinity; VAR2 *= VAR1", |
| Number.NaN, |
| eval("VAR1 = -0; VAR2 = Number.POSITIVE_INFINITY; VAR2 *= VAR1; VAR2") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = -0; VAR2= -Infinity; VAR2 *= VAR1", |
| Number.NaN, |
| eval("VAR1 = -0; VAR2 = Number.NEGATIVE_INFINITY; VAR2 *= VAR1; VAR2") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = 0; VAR2= -Infinity; VAR2 *= VAR1", |
| Number.NaN, |
| eval("VAR1 = 0; VAR2 = Number.NEGATIVE_INFINITY; VAR2 *= VAR1; VAR2") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = Infinity; VAR2= Infinity; VAR1 *= VAR2", |
| Number.POSITIVE_INFINITY, |
| eval("VAR1 = Number.POSITIVE_INFINITY; VAR2 = Number.POSITIVE_INFINITY; VAR1 *= VAR2; VAR1") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = Infinity; VAR2= -Infinity; VAR1 *= VAR2", |
| Number.NEGATIVE_INFINITY, |
| eval("VAR1 = Number.POSITIVE_INFINITY; VAR2 = Number.NEGATIVE_INFINITY; VAR1 *= VAR2; VAR1") ); |
| |
| new TestCase( SECTION, |
| "VAR1 =-Infinity; VAR2= Infinity; VAR1 *= VAR2", |
| Number.NEGATIVE_INFINITY, |
| eval("VAR1 = Number.NEGATIVE_INFINITY; VAR2 = Number.POSITIVE_INFINITY; VAR1 *= VAR2; VAR1") ); |
| |
| new TestCase( SECTION, |
| "VAR1 =-Infinity; VAR2=-Infinity; VAR1 *= VAR2", |
| Number.POSITIVE_INFINITY, |
| eval("VAR1 = Number.NEGATIVE_INFINITY; VAR2 = Number.NEGATIVE_INFINITY; VAR1 *= VAR2; VAR1") ); |
| |
| // string cases |
| new TestCase( SECTION, |
| "VAR1 = 10; VAR2 = '255', VAR1 *= VAR2", |
| 2550, |
| eval("VAR1 = 10; VAR2 = '255', VAR1 *= VAR2") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = '255'; VAR2 = 10, VAR1 *= VAR2", |
| 2550, |
| eval("VAR1 = '255'; VAR2 = 10, VAR1 *= VAR2") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = 10; VAR2 = '0XFF', VAR1 *= VAR2", |
| 2550, |
| eval("VAR1 = 10; VAR2 = '0XFF', VAR1 *= VAR2") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = '0xFF'; VAR2 = 0xA, VAR1 *= VAR2", |
| 2550, |
| eval("VAR1 = '0XFF'; VAR2 = 0XA, VAR1 *= VAR2") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = '10'; VAR2 = '255', VAR1 *= VAR2", |
| 2550, |
| eval("VAR1 = '10'; VAR2 = '255', VAR1 *= VAR2") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = '10'; VAR2 = '0XFF', VAR1 *= VAR2", |
| 2550, |
| eval("VAR1 = '10'; VAR2 = '0XFF', VAR1 *= VAR2") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = '0xFF'; VAR2 = 0xA, VAR1 *= VAR2", |
| 2550, |
| eval("VAR1 = '0XFF'; VAR2 = 0XA, VAR1 *= VAR2") ); |
| |
| // boolean cases |
| new TestCase( SECTION, |
| "VAR1 = true; VAR2 = false; VAR1 *= VAR2", |
| 0, |
| eval("VAR1 = true; VAR2 = false; VAR1 *= VAR2") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = true; VAR2 = true; VAR1 *= VAR2", |
| 1, |
| eval("VAR1 = true; VAR2 = true; VAR1 *= VAR2") ); |
| |
| // object cases |
| new TestCase( SECTION, |
| "VAR1 = new Boolean(true); VAR2 = 10; VAR1 *= VAR2;VAR1", |
| 10, |
| eval("VAR1 = new Boolean(true); VAR2 = 10; VAR1 *= VAR2; VAR1") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = new Number(11); VAR2 = 10; VAR1 *= VAR2; VAR1", |
| 110, |
| eval("VAR1 = new Number(11); VAR2 = 10; VAR1 *= VAR2; VAR1") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = new Number(11); VAR2 = new Number(10); VAR1 *= VAR2", |
| 110, |
| eval("VAR1 = new Number(11); VAR2 = new Number(10); VAR1 *= VAR2") ); |
| |
| new TestCase( SECTION, |
| "VAR1 = new String('15'); VAR2 = new String('0xF'); VAR1 *= VAR2", |
| 225, |
| eval("VAR1 = String('15'); VAR2 = new String('0xF'); VAR1 *= VAR2") ); |
| |
| test(); |
| |