| # Copyright 2017 the V8 project authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| # for py2/py3 compatibility |
| from __future__ import print_function |
| from functools import reduce |
| |
| from collections import OrderedDict |
| import json |
| import multiprocessing |
| import optparse |
| import os |
| import shlex |
| import sys |
| import traceback |
| |
| |
| |
| # Add testrunner to the path. |
| sys.path.insert( |
| 0, |
| os.path.dirname( |
| os.path.dirname(os.path.abspath(__file__)))) |
| |
| |
| from testrunner.local import command |
| from testrunner.local import testsuite |
| from testrunner.local import utils |
| from testrunner.test_config import TestConfig |
| from testrunner.testproc import progress |
| from testrunner.testproc.rerun import RerunProc |
| from testrunner.testproc.shard import ShardProc |
| from testrunner.testproc.sigproc import SignalProc |
| from testrunner.testproc.timeout import TimeoutProc |
| from testrunner.testproc import util |
| |
| |
| BASE_DIR = ( |
| os.path.dirname( |
| os.path.dirname( |
| os.path.dirname( |
| os.path.abspath(__file__))))) |
| |
| DEFAULT_OUT_GN = 'out.gn' |
| |
| # Map of test name synonyms to lists of test suites. Should be ordered by |
| # expected runtimes (suites with slow test cases first). These groups are |
| # invoked in separate steps on the bots. |
| # The mapping from names used here to GN targets (which must stay in sync) |
| # is defined in infra/mb/gn_isolate_map.pyl. |
| TEST_MAP = { |
| # This needs to stay in sync with group("v8_bot_default") in test/BUILD.gn. |
| "bot_default": [ |
| "debugger", |
| "mjsunit", |
| "cctest", |
| "wasm-spec-tests", |
| "inspector", |
| "webkit", |
| "mkgrokdump", |
| "wasm-js", |
| "fuzzer", |
| "message", |
| "intl", |
| "unittests", |
| "wasm-api-tests", |
| ], |
| # This needs to stay in sync with group("v8_default") in test/BUILD.gn. |
| "default": [ |
| "debugger", |
| "mjsunit", |
| "cctest", |
| "wasm-spec-tests", |
| "inspector", |
| "mkgrokdump", |
| "wasm-js", |
| "fuzzer", |
| "message", |
| "intl", |
| "unittests", |
| "wasm-api-tests", |
| ], |
| # This needs to stay in sync with group("v8_d8_default") in test/BUILD.gn. |
| "d8_default": [ |
| "debugger", |
| "mjsunit", |
| "webkit", |
| "message", |
| "intl", |
| ], |
| # This needs to stay in sync with "v8_optimize_for_size" in test/BUILD.gn. |
| "optimize_for_size": [ |
| "debugger", |
| "mjsunit", |
| "cctest", |
| "inspector", |
| "webkit", |
| "intl", |
| ], |
| "unittests": [ |
| "unittests", |
| ], |
| } |
| |
| # Increase the timeout for these: |
| SLOW_ARCHS = [ |
| "arm", |
| "arm64", |
| "mips", |
| "mipsel", |
| "mips64", |
| "mips64el", |
| "s390", |
| "s390x", |
| ] |
| |
| |
| class ModeConfig(object): |
| def __init__(self, flags, timeout_scalefactor, status_mode, execution_mode): |
| self.flags = flags |
| self.timeout_scalefactor = timeout_scalefactor |
| self.status_mode = status_mode |
| self.execution_mode = execution_mode |
| |
| |
| DEBUG_FLAGS = ["--nohard-abort", "--enable-slow-asserts", "--verify-heap"] |
| RELEASE_FLAGS = ["--nohard-abort"] |
| MODES = { |
| "debug": ModeConfig( |
| flags=DEBUG_FLAGS, |
| timeout_scalefactor=4, |
| status_mode="debug", |
| execution_mode="debug", |
| ), |
| "optdebug": ModeConfig( |
| flags=DEBUG_FLAGS, |
| timeout_scalefactor=4, |
| status_mode="debug", |
| execution_mode="debug", |
| ), |
| "release": ModeConfig( |
| flags=RELEASE_FLAGS, |
| timeout_scalefactor=1, |
| status_mode="release", |
| execution_mode="release", |
| ), |
| # Normal trybot release configuration. There, dchecks are always on which |
| # implies debug is set. Hence, the status file needs to assume debug-like |
| # behavior/timeouts. |
| "tryrelease": ModeConfig( |
| flags=RELEASE_FLAGS, |
| timeout_scalefactor=1, |
| status_mode="debug", |
| execution_mode="release", |
| ), |
| # This mode requires v8 to be compiled with dchecks and slow dchecks. |
| "slowrelease": ModeConfig( |
| flags=RELEASE_FLAGS + ["--enable-slow-asserts"], |
| timeout_scalefactor=2, |
| status_mode="debug", |
| execution_mode="release", |
| ), |
| } |
| |
| PROGRESS_INDICATORS = { |
| 'verbose': progress.VerboseProgressIndicator, |
| 'ci': progress.CIProgressIndicator, |
| 'dots': progress.DotsProgressIndicator, |
| 'color': progress.ColorProgressIndicator, |
| 'mono': progress.MonochromeProgressIndicator, |
| 'stream': progress.StreamProgressIndicator, |
| } |
| |
| class TestRunnerError(Exception): |
| pass |
| |
| |
| class BuildConfig(object): |
| def __init__(self, build_config): |
| # In V8 land, GN's x86 is called ia32. |
| if build_config['v8_target_cpu'] == 'x86': |
| self.arch = 'ia32' |
| else: |
| self.arch = build_config['v8_target_cpu'] |
| |
| self.asan = build_config['is_asan'] |
| self.cfi_vptr = build_config['is_cfi'] |
| self.dcheck_always_on = build_config['dcheck_always_on'] |
| self.gcov_coverage = build_config['is_gcov_coverage'] |
| self.is_android = build_config['is_android'] |
| self.is_clang = build_config['is_clang'] |
| self.is_debug = build_config['is_debug'] |
| self.is_full_debug = build_config['is_full_debug'] |
| self.msan = build_config['is_msan'] |
| self.no_i18n = not build_config['v8_enable_i18n_support'] |
| self.predictable = build_config['v8_enable_verify_predictable'] |
| self.tsan = build_config['is_tsan'] |
| # TODO(machenbach): We only have ubsan not ubsan_vptr. |
| self.ubsan_vptr = build_config['is_ubsan_vptr'] |
| self.verify_csa = build_config['v8_enable_verify_csa'] |
| self.lite_mode = build_config['v8_enable_lite_mode'] |
| self.pointer_compression = build_config['v8_enable_pointer_compression'] |
| # Export only for MIPS target |
| if self.arch in ['mips', 'mipsel', 'mips64', 'mips64el']: |
| self.mips_arch_variant = build_config['mips_arch_variant'] |
| self.mips_use_msa = build_config['mips_use_msa'] |
| |
| @property |
| def use_sanitizer(self): |
| return (self.asan or self.cfi_vptr or self.msan or self.tsan or |
| self.ubsan_vptr) |
| |
| def __str__(self): |
| detected_options = [] |
| |
| if self.asan: |
| detected_options.append('asan') |
| if self.cfi_vptr: |
| detected_options.append('cfi_vptr') |
| if self.dcheck_always_on: |
| detected_options.append('dcheck_always_on') |
| if self.gcov_coverage: |
| detected_options.append('gcov_coverage') |
| if self.msan: |
| detected_options.append('msan') |
| if self.no_i18n: |
| detected_options.append('no_i18n') |
| if self.predictable: |
| detected_options.append('predictable') |
| if self.tsan: |
| detected_options.append('tsan') |
| if self.ubsan_vptr: |
| detected_options.append('ubsan_vptr') |
| if self.verify_csa: |
| detected_options.append('verify_csa') |
| if self.lite_mode: |
| detected_options.append('lite_mode') |
| if self.pointer_compression: |
| detected_options.append('pointer_compression') |
| |
| return '\n'.join(detected_options) |
| |
| |
| class BaseTestRunner(object): |
| def __init__(self, basedir=None): |
| self.basedir = basedir or BASE_DIR |
| self.outdir = None |
| self.build_config = None |
| self.mode_name = None |
| self.mode_options = None |
| self.target_os = None |
| |
| @property |
| def framework_name(self): |
| """String name of the base-runner subclass, used in test results.""" |
| raise NotImplementedError() |
| |
| def execute(self, sys_args=None): |
| if sys_args is None: # pragma: no cover |
| sys_args = sys.argv[1:] |
| try: |
| parser = self._create_parser() |
| options, args = self._parse_args(parser, sys_args) |
| if options.swarming: |
| # Swarming doesn't print how isolated commands are called. Lets make |
| # this less cryptic by printing it ourselves. |
| print(' '.join(sys.argv)) |
| |
| # Kill stray processes from previous tasks on swarming. |
| util.kill_processes_linux() |
| |
| self._load_build_config(options) |
| command.setup(self.target_os, options.device) |
| |
| try: |
| self._process_default_options(options) |
| self._process_options(options) |
| except TestRunnerError: |
| parser.print_help() |
| raise |
| |
| args = self._parse_test_args(args) |
| tests = self._load_testsuite_generators(args, options) |
| self._setup_env() |
| print(">>> Running tests for %s.%s" % (self.build_config.arch, |
| self.mode_name)) |
| exit_code = self._do_execute(tests, args, options) |
| if exit_code == utils.EXIT_CODE_FAILURES and options.json_test_results: |
| print("Force exit code 0 after failures. Json test results file " |
| "generated with failure information.") |
| exit_code = utils.EXIT_CODE_PASS |
| return exit_code |
| except TestRunnerError: |
| traceback.print_exc() |
| return utils.EXIT_CODE_INTERNAL_ERROR |
| except KeyboardInterrupt: |
| return utils.EXIT_CODE_INTERRUPTED |
| except Exception: |
| traceback.print_exc() |
| return utils.EXIT_CODE_INTERNAL_ERROR |
| finally: |
| command.tear_down() |
| |
| def _create_parser(self): |
| parser = optparse.OptionParser() |
| parser.usage = '%prog [options] [tests]' |
| parser.description = """TESTS: %s""" % (TEST_MAP["default"]) |
| self._add_parser_default_options(parser) |
| self._add_parser_options(parser) |
| return parser |
| |
| def _add_parser_default_options(self, parser): |
| parser.add_option("--gn", help="Scan out.gn for the last built" |
| " configuration", |
| default=False, action="store_true") |
| parser.add_option("--outdir", help="Base directory with compile output", |
| default="out") |
| parser.add_option("--arch", |
| help="The architecture to run tests for") |
| parser.add_option("-m", "--mode", |
| help="The test mode in which to run (uppercase for builds" |
| " in CI): %s" % MODES.keys()) |
| parser.add_option("--shell-dir", help="DEPRECATED! Executables from build " |
| "directory will be used") |
| parser.add_option("--test-root", help="Root directory of the test suites", |
| default=os.path.join(self.basedir, 'test')) |
| parser.add_option("--total-timeout-sec", default=0, type="int", |
| help="How long should fuzzer run") |
| parser.add_option("--swarming", default=False, action="store_true", |
| help="Indicates running test driver on swarming.") |
| |
| parser.add_option("-j", help="The number of parallel tasks to run", |
| default=0, type=int) |
| parser.add_option("-d", "--device", |
| help="The device ID to run Android tests on. If not " |
| "given it will be autodetected.") |
| |
| # Shard |
| parser.add_option("--shard-count", default=1, type=int, |
| help="Split tests into this number of shards") |
| parser.add_option("--shard-run", default=1, type=int, |
| help="Run this shard from the split up tests.") |
| |
| # Progress |
| parser.add_option("-p", "--progress", |
| choices=PROGRESS_INDICATORS.keys(), default="mono", |
| help="The style of progress indicator (verbose, dots, " |
| "color, mono)") |
| parser.add_option("--json-test-results", |
| help="Path to a file for storing json results.") |
| parser.add_option('--slow-tests-cutoff', type="int", default=100, |
| help='Collect N slowest tests') |
| parser.add_option("--exit-after-n-failures", type="int", default=100, |
| help="Exit after the first N failures instead of " |
| "running all tests. Pass 0 to disable this feature.") |
| parser.add_option("--ci-test-completion", |
| help="Path to a file for logging test completion in the " |
| "context of CI progress indicator. Ignored if " |
| "progress indicator is other than 'ci'.") |
| |
| # Rerun |
| parser.add_option("--rerun-failures-count", default=0, type=int, |
| help="Number of times to rerun each failing test case. " |
| "Very slow tests will be rerun only once.") |
| parser.add_option("--rerun-failures-max", default=100, type=int, |
| help="Maximum number of failing test cases to rerun") |
| |
| # Test config |
| parser.add_option("--command-prefix", default="", |
| help="Prepended to each shell command used to run a test") |
| parser.add_option("--extra-flags", action="append", default=[], |
| help="Additional flags to pass to each test command") |
| parser.add_option("--isolates", action="store_true", default=False, |
| help="Whether to test isolates") |
| parser.add_option("--no-harness", "--noharness", |
| default=False, action="store_true", |
| help="Run without test harness of a given suite") |
| parser.add_option("--random-seed", default=0, type=int, |
| help="Default seed for initializing random generator") |
| parser.add_option("--run-skipped", help="Also run skipped tests.", |
| default=False, action="store_true") |
| parser.add_option("-t", "--timeout", default=60, type=int, |
| help="Timeout for single test in seconds") |
| parser.add_option("-v", "--verbose", default=False, action="store_true", |
| help="Verbose output") |
| parser.add_option('--regenerate-expected-files', default=False, action='store_true', |
| help='Regenerate expected files') |
| |
| # TODO(machenbach): Temporary options for rolling out new test runner |
| # features. |
| parser.add_option("--mastername", default='', |
| help="Mastername property from infrastructure. Not " |
| "setting this option indicates manual usage.") |
| parser.add_option("--buildername", default='', |
| help="Buildername property from infrastructure. Not " |
| "setting this option indicates manual usage.") |
| |
| def _add_parser_options(self, parser): |
| pass |
| |
| def _parse_args(self, parser, sys_args): |
| options, args = parser.parse_args(sys_args) |
| |
| if any(map(lambda v: v and ',' in v, |
| [options.arch, options.mode])): # pragma: no cover |
| print('Multiple arch/mode are deprecated') |
| raise TestRunnerError() |
| |
| return options, args |
| |
| def _load_build_config(self, options): |
| for outdir in self._possible_outdirs(options): |
| try: |
| self.build_config = self._do_load_build_config(outdir, options.verbose) |
| except TestRunnerError: |
| pass |
| |
| if not self.build_config: # pragma: no cover |
| print('Failed to load build config') |
| raise TestRunnerError |
| |
| print('Build found: %s' % self.outdir) |
| if str(self.build_config): |
| print('>>> Autodetected:') |
| print(self.build_config) |
| |
| # Represents the OS where tests are run on. Same as host OS except for |
| # Android, which is determined by build output. |
| if self.build_config.is_android: |
| self.target_os = 'android' |
| else: |
| self.target_os = utils.GuessOS() |
| |
| # Returns possible build paths in order: |
| # gn |
| # outdir |
| # outdir/arch.mode |
| # Each path is provided in two versions: <path> and <path>/mode for bots. |
| def _possible_outdirs(self, options): |
| def outdirs(): |
| if options.gn: |
| yield self._get_gn_outdir() |
| return |
| |
| yield options.outdir |
| if options.arch and options.mode: |
| yield os.path.join(options.outdir, |
| '%s.%s' % (options.arch, options.mode)) |
| |
| for outdir in outdirs(): |
| yield os.path.join(self.basedir, outdir) |
| |
| # bot option |
| if options.mode: |
| yield os.path.join(self.basedir, outdir, options.mode) |
| |
| def _get_gn_outdir(self): |
| gn_out_dir = os.path.join(self.basedir, DEFAULT_OUT_GN) |
| latest_timestamp = -1 |
| latest_config = None |
| for gn_config in os.listdir(gn_out_dir): |
| gn_config_dir = os.path.join(gn_out_dir, gn_config) |
| if not os.path.isdir(gn_config_dir): |
| continue |
| if os.path.getmtime(gn_config_dir) > latest_timestamp: |
| latest_timestamp = os.path.getmtime(gn_config_dir) |
| latest_config = gn_config |
| if latest_config: |
| print(">>> Latest GN build found: %s" % latest_config) |
| return os.path.join(DEFAULT_OUT_GN, latest_config) |
| |
| def _do_load_build_config(self, outdir, verbose=False): |
| build_config_path = os.path.join(outdir, "v8_build_config.json") |
| if not os.path.exists(build_config_path): |
| if verbose: |
| print("Didn't find build config: %s" % build_config_path) |
| raise TestRunnerError() |
| |
| with open(build_config_path) as f: |
| try: |
| build_config_json = json.load(f) |
| except Exception: # pragma: no cover |
| print("%s exists but contains invalid json. Is your build up-to-date?" |
| % build_config_path) |
| raise TestRunnerError() |
| |
| # In auto-detect mode the outdir is always where we found the build config. |
| # This ensures that we'll also take the build products from there. |
| self.outdir = os.path.dirname(build_config_path) |
| |
| return BuildConfig(build_config_json) |
| |
| def _process_default_options(self, options): |
| # We don't use the mode for more path-magic. |
| # Therefore transform the bot mode here to fix build_config value. |
| if options.mode: |
| options.mode = self._bot_to_v8_mode(options.mode) |
| |
| build_config_mode = 'debug' if self.build_config.is_debug else 'release' |
| if options.mode: |
| if options.mode not in MODES: # pragma: no cover |
| print('%s mode is invalid' % options.mode) |
| raise TestRunnerError() |
| if MODES[options.mode].execution_mode != build_config_mode: |
| print ('execution mode (%s) for %s is inconsistent with build config ' |
| '(%s)' % ( |
| MODES[options.mode].execution_mode, |
| options.mode, |
| build_config_mode)) |
| raise TestRunnerError() |
| |
| self.mode_name = options.mode |
| else: |
| self.mode_name = build_config_mode |
| |
| self.mode_options = MODES[self.mode_name] |
| |
| if options.arch and options.arch != self.build_config.arch: |
| print('--arch value (%s) inconsistent with build config (%s).' % ( |
| options.arch, self.build_config.arch)) |
| raise TestRunnerError() |
| |
| if options.shell_dir: # pragma: no cover |
| print('Warning: --shell-dir is deprecated. Searching for executables in ' |
| 'build directory (%s) instead.' % self.outdir) |
| |
| if options.j == 0: |
| if self.build_config.is_android: |
| # Adb isn't happy about multi-processed file pushing. |
| options.j = 1 |
| else: |
| options.j = multiprocessing.cpu_count() |
| |
| options.command_prefix = shlex.split(options.command_prefix) |
| options.extra_flags = sum(map(shlex.split, options.extra_flags), []) |
| |
| def _bot_to_v8_mode(self, config): |
| """Convert build configs from bots to configs understood by the v8 runner. |
| |
| V8 configs are always lower case and without the additional _x64 suffix |
| for 64 bit builds on windows with ninja. |
| """ |
| mode = config[:-4] if config.endswith('_x64') else config |
| return mode.lower() |
| |
| def _process_options(self, options): |
| pass |
| |
| def _setup_env(self): |
| # Use the v8 root as cwd as some test cases use "load" with relative paths. |
| os.chdir(self.basedir) |
| |
| # Many tests assume an English interface. |
| os.environ['LANG'] = 'en_US.UTF-8' |
| |
| symbolizer_option = self._get_external_symbolizer_option() |
| |
| if self.build_config.asan: |
| asan_options = [ |
| symbolizer_option, |
| 'allow_user_segv_handler=1', |
| 'allocator_may_return_null=1', |
| ] |
| if not utils.GuessOS() in ['macos', 'windows']: |
| # LSAN is not available on mac and windows. |
| asan_options.append('detect_leaks=1') |
| else: |
| asan_options.append('detect_leaks=0') |
| if utils.GuessOS() == 'windows': |
| # https://crbug.com/967663 |
| asan_options.append('detect_stack_use_after_return=0') |
| os.environ['ASAN_OPTIONS'] = ":".join(asan_options) |
| |
| if self.build_config.cfi_vptr: |
| os.environ['UBSAN_OPTIONS'] = ":".join([ |
| 'print_stacktrace=1', |
| 'print_summary=1', |
| 'symbolize=1', |
| symbolizer_option, |
| ]) |
| |
| if self.build_config.ubsan_vptr: |
| os.environ['UBSAN_OPTIONS'] = ":".join([ |
| 'print_stacktrace=1', |
| symbolizer_option, |
| ]) |
| |
| if self.build_config.msan: |
| os.environ['MSAN_OPTIONS'] = symbolizer_option |
| |
| if self.build_config.tsan: |
| suppressions_file = os.path.join( |
| self.basedir, |
| 'tools', |
| 'sanitizers', |
| 'tsan_suppressions.txt') |
| os.environ['TSAN_OPTIONS'] = " ".join([ |
| symbolizer_option, |
| 'suppressions=%s' % suppressions_file, |
| 'exit_code=0', |
| 'report_thread_leaks=0', |
| 'history_size=7', |
| 'report_destroy_locked=0', |
| ]) |
| |
| def _get_external_symbolizer_option(self): |
| external_symbolizer_path = os.path.join( |
| self.basedir, |
| 'third_party', |
| 'llvm-build', |
| 'Release+Asserts', |
| 'bin', |
| 'llvm-symbolizer', |
| ) |
| |
| if utils.IsWindows(): |
| # Quote, because sanitizers might confuse colon as option separator. |
| external_symbolizer_path = '"%s.exe"' % external_symbolizer_path |
| |
| return 'external_symbolizer_path=%s' % external_symbolizer_path |
| |
| def _parse_test_args(self, args): |
| if not args: |
| args = self._get_default_suite_names() |
| |
| # Expand arguments with grouped tests. The args should reflect the list |
| # of suites as otherwise filters would break. |
| def expand_test_group(name): |
| return TEST_MAP.get(name, [name]) |
| |
| return reduce(list.__add__, map(expand_test_group, args), []) |
| |
| def _args_to_suite_names(self, args, test_root): |
| # Use default tests if no test configuration was provided at the cmd line. |
| all_names = set(utils.GetSuitePaths(test_root)) |
| args_names = OrderedDict([(arg.split('/')[0], None) for arg in args]) # set |
| return [name for name in args_names if name in all_names] |
| |
| def _get_default_suite_names(self): |
| return [] |
| |
| def _load_testsuite_generators(self, args, options): |
| names = self._args_to_suite_names(args, options.test_root) |
| test_config = self._create_test_config(options) |
| variables = self._get_statusfile_variables(options) |
| |
| # Head generator with no elements |
| test_chain = testsuite.TestGenerator(0, [], []) |
| for name in names: |
| if options.verbose: |
| print('>>> Loading test suite: %s' % name) |
| suite = testsuite.TestSuite.Load( |
| os.path.join(options.test_root, name), test_config, |
| self.framework_name) |
| |
| if self._is_testsuite_supported(suite, options): |
| tests = suite.load_tests_from_disk(variables) |
| test_chain.merge(tests) |
| |
| return test_chain |
| |
| def _is_testsuite_supported(self, suite, options): |
| """A predicate that can be overridden to filter out unsupported TestSuite |
| instances (see NumFuzzer for usage).""" |
| return True |
| |
| def _get_statusfile_variables(self, options): |
| simd_mips = ( |
| self.build_config.arch in ['mipsel', 'mips', 'mips64', 'mips64el'] and |
| self.build_config.mips_arch_variant == "r6" and |
| self.build_config.mips_use_msa) |
| |
| mips_arch_variant = ( |
| self.build_config.arch in ['mipsel', 'mips', 'mips64', 'mips64el'] and |
| self.build_config.mips_arch_variant) |
| |
| # TODO(machenbach): In GN we can derive simulator run from |
| # target_arch != v8_target_arch in the dumped build config. |
| return { |
| "arch": self.build_config.arch, |
| "asan": self.build_config.asan, |
| "byteorder": sys.byteorder, |
| "cfi_vptr": self.build_config.cfi_vptr, |
| "dcheck_always_on": self.build_config.dcheck_always_on, |
| "deopt_fuzzer": False, |
| "endurance_fuzzer": False, |
| "gc_fuzzer": False, |
| "gc_stress": False, |
| "gcov_coverage": self.build_config.gcov_coverage, |
| "isolates": options.isolates, |
| "is_clang": self.build_config.is_clang, |
| "is_full_debug": self.build_config.is_full_debug, |
| "mips_arch_variant": mips_arch_variant, |
| "mode": self.mode_options.status_mode |
| if not self.build_config.dcheck_always_on |
| else "debug", |
| "msan": self.build_config.msan, |
| "no_harness": options.no_harness, |
| "no_i18n": self.build_config.no_i18n, |
| "novfp3": False, |
| "optimize_for_size": "--optimize-for-size" in options.extra_flags, |
| "predictable": self.build_config.predictable, |
| "simd_mips": simd_mips, |
| "simulator_run": False, |
| "system": self.target_os, |
| "tsan": self.build_config.tsan, |
| "ubsan_vptr": self.build_config.ubsan_vptr, |
| "verify_csa": self.build_config.verify_csa, |
| "lite_mode": self.build_config.lite_mode, |
| "pointer_compression": self.build_config.pointer_compression, |
| } |
| |
| def _runner_flags(self): |
| """Extra default flags specific to the test runner implementation.""" |
| return [] |
| |
| def _create_test_config(self, options): |
| timeout = options.timeout * self._timeout_scalefactor(options) |
| return TestConfig( |
| command_prefix=options.command_prefix, |
| extra_flags=options.extra_flags, |
| isolates=options.isolates, |
| mode_flags=self.mode_options.flags + self._runner_flags(), |
| no_harness=options.no_harness, |
| noi18n=self.build_config.no_i18n, |
| random_seed=options.random_seed, |
| run_skipped=options.run_skipped, |
| shell_dir=self.outdir, |
| timeout=timeout, |
| verbose=options.verbose, |
| regenerate_expected_files=options.regenerate_expected_files, |
| ) |
| |
| def _timeout_scalefactor(self, options): |
| """Increases timeout for slow build configurations.""" |
| factor = self.mode_options.timeout_scalefactor |
| if self.build_config.arch in SLOW_ARCHS: |
| factor *= 4.5 |
| if self.build_config.lite_mode: |
| factor *= 2 |
| if self.build_config.predictable: |
| factor *= 4 |
| if self.build_config.use_sanitizer: |
| factor *= 1.5 |
| if self.build_config.is_full_debug: |
| factor *= 4 |
| |
| return factor |
| |
| # TODO(majeski): remove options & args parameters |
| def _do_execute(self, suites, args, options): |
| raise NotImplementedError() |
| |
| def _prepare_procs(self, procs): |
| procs = filter(None, procs) |
| for i in range(0, len(procs) - 1): |
| procs[i].connect_to(procs[i + 1]) |
| procs[0].setup() |
| |
| def _create_shard_proc(self, options): |
| myid, count = self._get_shard_info(options) |
| if count == 1: |
| return None |
| return ShardProc(myid - 1, count) |
| |
| def _get_shard_info(self, options): |
| """ |
| Returns pair: |
| (id of the current shard [1; number of shards], number of shards) |
| """ |
| # Read gtest shard configuration from environment (e.g. set by swarming). |
| # If none is present, use values passed on the command line. |
| shard_count = int( |
| os.environ.get('GTEST_TOTAL_SHARDS', options.shard_count)) |
| shard_run = os.environ.get('GTEST_SHARD_INDEX') |
| if shard_run is not None: |
| # The v8 shard_run starts at 1, while GTEST_SHARD_INDEX starts at 0. |
| shard_run = int(shard_run) + 1 |
| else: |
| shard_run = options.shard_run |
| |
| if options.shard_count > 1: |
| # Log if a value was passed on the cmd line and it differs from the |
| # environment variables. |
| if options.shard_count != shard_count: # pragma: no cover |
| print("shard_count from cmd line differs from environment variable " |
| "GTEST_TOTAL_SHARDS") |
| if (options.shard_run > 1 and |
| options.shard_run != shard_run): # pragma: no cover |
| print("shard_run from cmd line differs from environment variable " |
| "GTEST_SHARD_INDEX") |
| |
| if shard_run < 1 or shard_run > shard_count: |
| # TODO(machenbach): Turn this into an assert. If that's wrong on the |
| # bots, printing will be quite useless. Or refactor this code to make |
| # sure we get a return code != 0 after testing if we got here. |
| print("shard-run not a valid number, should be in [1:shard-count]") |
| print("defaulting back to running all tests") |
| return 1, 1 |
| |
| return shard_run, shard_count |
| |
| def _create_progress_indicators(self, test_count, options): |
| procs = [PROGRESS_INDICATORS[options.progress]()] |
| if options.json_test_results: |
| procs.append(progress.JsonTestProgressIndicator( |
| self.framework_name, |
| self.build_config.arch, |
| self.mode_options.execution_mode)) |
| |
| for proc in procs: |
| proc.configure(options) |
| |
| for proc in procs: |
| try: |
| proc.set_test_count(test_count) |
| except AttributeError: |
| pass |
| |
| return procs |
| |
| def _create_result_tracker(self, options): |
| return progress.ResultsTracker(options.exit_after_n_failures) |
| |
| def _create_timeout_proc(self, options): |
| if not options.total_timeout_sec: |
| return None |
| return TimeoutProc(options.total_timeout_sec) |
| |
| def _create_signal_proc(self): |
| return SignalProc() |
| |
| def _create_rerun_proc(self, options): |
| if not options.rerun_failures_count: |
| return None |
| return RerunProc(options.rerun_failures_count, |
| options.rerun_failures_max) |
