blob: a50ae60d7b630031b55bda7ffaf97a6f67ee1ee2 [file] [log] [blame]
;
; Copyright (c) 2010 The VP8 project authors. All Rights Reserved.
;
; Use of this source code is governed by a BSD-style license and patent
; grant that can be found in the LICENSE file in the root of the source
; tree. All contributing project authors may be found in the AUTHORS
; file in the root of the source tree.
;
EXPORT |vp8_yv12_copy_frame_yonly_neon|
EXPORT |vp8_yv12_copy_frame_yonly_no_extend_frame_borders_neon|
ARM
REQUIRE8
PRESERVE8
INCLUDE vpx_asm_offsets.asm
AREA ||.text||, CODE, READONLY, ALIGN=2
;void vpxyv12_copy_frame_yonly(YV12_BUFFER_CONFIG *src_ybc, YV12_BUFFER_CONFIG *dst_ybc);
; Note: this is VP8 function, which has border=32 and 16. Internal y_width and y_height
; are always multiples of 16.
|vp8_yv12_copy_frame_yonly_neon| PROC
push {r4 - r11, lr}
vpush {d8 - d15}
ldr r4, [r0, #yv12_buffer_config_y_height]
ldr r5, [r0, #yv12_buffer_config_y_width]
ldr r6, [r0, #yv12_buffer_config_y_stride]
ldr r7, [r1, #yv12_buffer_config_y_stride]
ldr r2, [r0, #yv12_buffer_config_y_buffer] ;srcptr1
ldr r3, [r1, #yv12_buffer_config_y_buffer] ;dstptr1
; copy two rows at one time
mov lr, r4, lsr #1
cp_src_to_dst_height_loop
mov r8, r2
mov r9, r3
add r10, r2, r6
add r11, r3, r7
mov r12, r5, lsr #7
cp_src_to_dst_width_loop
vld1.8 {q0, q1}, [r8]!
vld1.8 {q8, q9}, [r10]!
vld1.8 {q2, q3}, [r8]!
vld1.8 {q10, q11}, [r10]!
vld1.8 {q4, q5}, [r8]!
vld1.8 {q12, q13}, [r10]!
vld1.8 {q6, q7}, [r8]!
vld1.8 {q14, q15}, [r10]!
subs r12, r12, #1
vst1.8 {q0, q1}, [r9]!
vst1.8 {q8, q9}, [r11]!
vst1.8 {q2, q3}, [r9]!
vst1.8 {q10, q11}, [r11]!
vst1.8 {q4, q5}, [r9]!
vst1.8 {q12, q13}, [r11]!
vst1.8 {q6, q7}, [r9]!
vst1.8 {q14, q15}, [r11]!
bne cp_src_to_dst_width_loop
subs lr, lr, #1
add r2, r2, r6, lsl #1
add r3, r3, r7, lsl #1
bne cp_src_to_dst_height_loop
ands r10, r5, #0x7f ;check to see if extra copy is needed
sub r11, r5, r10
ldr r2, [r0, #yv12_buffer_config_y_buffer] ;srcptr1
ldr r3, [r1, #yv12_buffer_config_y_buffer] ;dstptr1
bne extra_cp_src_to_dst_width
end_of_cp_src_to_dst
;vpxyv12_extend_frame_borders_yonly
mov r0, r1
;Not need to load y_width, since: y_width = y_stride - 2*border
ldr r3, [r0, #yv12_buffer_config_border]
ldr r1, [r0, #yv12_buffer_config_y_buffer] ;srcptr1
ldr r4, [r0, #yv12_buffer_config_y_height]
ldr lr, [r0, #yv12_buffer_config_y_stride]
cmp r3, #16
beq b16_extend_frame_borders
;=======================
b32_extend_frame_borders
;border = 32
;=======================
;Border copy for Y plane
;copy the left and right most columns out
sub r5, r1, r3 ;destptr1
add r6, r1, lr
sub r6, r6, r3, lsl #1 ;destptr2
sub r2, r6, #1 ;srcptr2
;Do four rows at one time
mov r12, r4, lsr #2
copy_left_right_y
vld1.8 {d0[], d1[]}, [r1], lr
vld1.8 {d4[], d5[]}, [r2], lr
vld1.8 {d8[], d9[]}, [r1], lr
vld1.8 {d12[], d13[]}, [r2], lr
vld1.8 {d16[], d17[]}, [r1], lr
vld1.8 {d20[], d21[]}, [r2], lr
vld1.8 {d24[], d25[]}, [r1], lr
vld1.8 {d28[], d29[]}, [r2], lr
vmov q1, q0
vmov q3, q2
vmov q5, q4
vmov q7, q6
vmov q9, q8
vmov q11, q10
vmov q13, q12
vmov q15, q14
subs r12, r12, #1
vst1.8 {q0, q1}, [r5], lr
vst1.8 {q2, q3}, [r6], lr
vst1.8 {q4, q5}, [r5], lr
vst1.8 {q6, q7}, [r6], lr
vst1.8 {q8, q9}, [r5], lr
vst1.8 {q10, q11}, [r6], lr
vst1.8 {q12, q13}, [r5], lr
vst1.8 {q14, q15}, [r6], lr
bne copy_left_right_y
;Now copy the top and bottom source lines into each line of the respective borders
ldr r7, [r0, #yv12_buffer_config_y_buffer] ;srcptr1
mul r8, r3, lr
mov r12, lr, lsr #7
sub r6, r1, r3 ;destptr2
sub r2, r6, lr ;srcptr2
sub r1, r7, r3 ;srcptr1
sub r5, r1, r8 ;destptr1
copy_top_bottom_y
vld1.8 {q0, q1}, [r1]!
vld1.8 {q8, q9}, [r2]!
vld1.8 {q2, q3}, [r1]!
vld1.8 {q10, q11}, [r2]!
vld1.8 {q4, q5}, [r1]!
vld1.8 {q12, q13}, [r2]!
vld1.8 {q6, q7}, [r1]!
vld1.8 {q14, q15}, [r2]!
mov r7, r3
top_bottom_32
subs r7, r7, #1
vst1.8 {q0, q1}, [r5]!
vst1.8 {q8, q9}, [r6]!
vst1.8 {q2, q3}, [r5]!
vst1.8 {q10, q11}, [r6]!
vst1.8 {q4, q5}, [r5]!
vst1.8 {q12, q13}, [r6]!
vst1.8 {q6, q7}, [r5]!
vst1.8 {q14, q15}, [r6]!
add r5, r5, lr
sub r5, r5, #128
add r6, r6, lr
sub r6, r6, #128
bne top_bottom_32
sub r5, r1, r8
add r6, r2, lr
subs r12, r12, #1
bne copy_top_bottom_y
mov r7, lr, lsr #4 ;check to see if extra copy is needed
ands r7, r7, #0x7
bne extra_top_bottom_y
end_of_border_copy_y
vpop {d8 - d15}
pop {r4 - r11, pc}
;=====================
;extra copy part for Y
extra_top_bottom_y
vld1.8 {q0}, [r1]!
vld1.8 {q2}, [r2]!
mov r9, r3, lsr #3
extra_top_bottom_32
subs r9, r9, #1
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
bne extra_top_bottom_32
sub r5, r1, r8
add r6, r2, lr
subs r7, r7, #1
bne extra_top_bottom_y
b end_of_border_copy_y
;=======================
b16_extend_frame_borders
;border = 16
;=======================
;Border copy for Y plane
;copy the left and right most columns out
sub r5, r1, r3 ;destptr1
add r6, r1, lr
sub r6, r6, r3, lsl #1 ;destptr2
sub r2, r6, #1 ;srcptr2
;Do four rows at one time
mov r12, r4, lsr #2
copy_left_right_y_b16
vld1.8 {d0[], d1[]}, [r1], lr
vld1.8 {d4[], d5[]}, [r2], lr
vld1.8 {d8[], d9[]}, [r1], lr
vld1.8 {d12[], d13[]}, [r2], lr
vld1.8 {d16[], d17[]}, [r1], lr
vld1.8 {d20[], d21[]}, [r2], lr
vld1.8 {d24[], d25[]}, [r1], lr
vld1.8 {d28[], d29[]}, [r2], lr
subs r12, r12, #1
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q4}, [r5], lr
vst1.8 {q6}, [r6], lr
vst1.8 {q8}, [r5], lr
vst1.8 {q10}, [r6], lr
vst1.8 {q12}, [r5], lr
vst1.8 {q14}, [r6], lr
bne copy_left_right_y_b16
;Now copy the top and bottom source lines into each line of the respective borders
ldr r7, [r0, #yv12_buffer_config_y_buffer] ;srcptr1
mul r8, r3, lr
mov r12, lr, lsr #7
sub r6, r1, r3 ;destptr2
sub r2, r6, lr ;srcptr2
sub r1, r7, r3 ;srcptr1
sub r5, r1, r8 ;destptr1
copy_top_bottom_y_b16
vld1.8 {q0, q1}, [r1]!
vld1.8 {q8, q9}, [r2]!
vld1.8 {q2, q3}, [r1]!
vld1.8 {q10, q11}, [r2]!
vld1.8 {q4, q5}, [r1]!
vld1.8 {q12, q13}, [r2]!
vld1.8 {q6, q7}, [r1]!
vld1.8 {q14, q15}, [r2]!
mov r7, r3
top_bottom_16_b16
subs r7, r7, #1
vst1.8 {q0, q1}, [r5]!
vst1.8 {q8, q9}, [r6]!
vst1.8 {q2, q3}, [r5]!
vst1.8 {q10, q11}, [r6]!
vst1.8 {q4, q5}, [r5]!
vst1.8 {q12, q13}, [r6]!
vst1.8 {q6, q7}, [r5]!
vst1.8 {q14, q15}, [r6]!
add r5, r5, lr
sub r5, r5, #128
add r6, r6, lr
sub r6, r6, #128
bne top_bottom_16_b16
sub r5, r1, r8
add r6, r2, lr
subs r12, r12, #1
bne copy_top_bottom_y_b16
mov r7, lr, lsr #4 ;check to see if extra copy is needed
ands r7, r7, #0x7
bne extra_top_bottom_y_b16
end_of_border_copy_y_b16
vpop {d8 - d15}
pop {r4 - r11, pc}
;=====================
;extra copy part for Y
extra_top_bottom_y_b16
vld1.8 {q0}, [r1]!
vld1.8 {q2}, [r2]!
mov r9, r3, lsr #3
extra_top_bottom_16_b16
subs r9, r9, #1
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
vst1.8 {q0}, [r5], lr
vst1.8 {q2}, [r6], lr
bne extra_top_bottom_16_b16
sub r5, r1, r8
add r6, r2, lr
subs r7, r7, #1
bne extra_top_bottom_y_b16
b end_of_border_copy_y_b16
;=============================
extra_cp_src_to_dst_width
add r2, r2, r11
add r3, r3, r11
add r0, r8, r6
add r11, r9, r7
mov lr, r4, lsr #1
extra_cp_src_to_dst_height_loop
mov r8, r2
mov r9, r3
add r0, r8, r6
add r11, r9, r7
mov r12, r10
extra_cp_src_to_dst_width_loop
vld1.8 {q0}, [r8]!
vld1.8 {q1}, [r0]!
subs r12, r12, #16
vst1.8 {q0}, [r9]!
vst1.8 {q1}, [r11]!
bne extra_cp_src_to_dst_width_loop
subs lr, lr, #1
add r2, r2, r6, lsl #1
add r3, r3, r7, lsl #1
bne extra_cp_src_to_dst_height_loop
b end_of_cp_src_to_dst
ENDP
;===========================================================
;In vp8cx_pick_filter_level(), call vp8_yv12_copy_frame_yonly
;without extend_frame_borders.
|vp8_yv12_copy_frame_yonly_no_extend_frame_borders_neon| PROC
push {r4 - r11, lr}
vpush {d8-d15}
ldr r4, [r0, #yv12_buffer_config_y_height]
ldr r5, [r0, #yv12_buffer_config_y_width]
ldr r6, [r0, #yv12_buffer_config_y_stride]
ldr r7, [r1, #yv12_buffer_config_y_stride]
ldr r2, [r0, #yv12_buffer_config_y_buffer] ;srcptr1
ldr r3, [r1, #yv12_buffer_config_y_buffer] ;dstptr1
; copy two rows at one time
mov lr, r4, lsr #1
cp_src_to_dst_height_loop1
mov r8, r2
mov r9, r3
add r10, r2, r6
add r11, r3, r7
mov r12, r5, lsr #7
cp_src_to_dst_width_loop1
vld1.8 {q0, q1}, [r8]!
vld1.8 {q8, q9}, [r10]!
vld1.8 {q2, q3}, [r8]!
vld1.8 {q10, q11}, [r10]!
vld1.8 {q4, q5}, [r8]!
vld1.8 {q12, q13}, [r10]!
vld1.8 {q6, q7}, [r8]!
vld1.8 {q14, q15}, [r10]!
subs r12, r12, #1
vst1.8 {q0, q1}, [r9]!
vst1.8 {q8, q9}, [r11]!
vst1.8 {q2, q3}, [r9]!
vst1.8 {q10, q11}, [r11]!
vst1.8 {q4, q5}, [r9]!
vst1.8 {q12, q13}, [r11]!
vst1.8 {q6, q7}, [r9]!
vst1.8 {q14, q15}, [r11]!
bne cp_src_to_dst_width_loop1
subs lr, lr, #1
add r2, r2, r6, lsl #1
add r3, r3, r7, lsl #1
bne cp_src_to_dst_height_loop1
ands r10, r5, #0x7f ;check to see if extra copy is needed
sub r11, r5, r10
ldr r2, [r0, #yv12_buffer_config_y_buffer] ;srcptr1
ldr r3, [r1, #yv12_buffer_config_y_buffer] ;dstptr1
bne extra_cp_src_to_dst_width1
end_of_cp_src_to_dst1
vpop {d8 - d15}
pop {r4-r11, pc}
;=============================
extra_cp_src_to_dst_width1
add r2, r2, r11
add r3, r3, r11
add r0, r8, r6
add r11, r9, r7
mov lr, r4, lsr #1
extra_cp_src_to_dst_height_loop1
mov r8, r2
mov r9, r3
add r0, r8, r6
add r11, r9, r7
mov r12, r10
extra_cp_src_to_dst_width_loop1
vld1.8 {q0}, [r8]!
vld1.8 {q1}, [r0]!
subs r12, r12, #16
vst1.8 {q0}, [r9]!
vst1.8 {q1}, [r11]!
bne extra_cp_src_to_dst_width_loop1
subs lr, lr, #1
add r2, r2, r6, lsl #1
add r3, r3, r7, lsl #1
bne extra_cp_src_to_dst_height_loop1
b end_of_cp_src_to_dst1
ENDP
END