| /* |
| * Copyright (c) 2013 The WebM project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #include "./vpx_config.h" |
| #include "vpx_dsp/mips/inv_txfm_dspr2.h" |
| #include "vpx_dsp/txfm_common.h" |
| |
| #if HAVE_DSPR2 |
| void vpx_idct32_cols_add_blk_dspr2(int16_t *input, uint8_t *dest, int stride) { |
| int step1_0, step1_1, step1_2, step1_3, step1_4, step1_5, step1_6; |
| int step1_7, step1_8, step1_9, step1_10, step1_11, step1_12, step1_13; |
| int step1_14, step1_15, step1_16, step1_17, step1_18, step1_19, step1_20; |
| int step1_21, step1_22, step1_23, step1_24, step1_25, step1_26, step1_27; |
| int step1_28, step1_29, step1_30, step1_31; |
| int step2_0, step2_1, step2_2, step2_3, step2_4, step2_5, step2_6; |
| int step2_7, step2_8, step2_9, step2_10, step2_11, step2_12, step2_13; |
| int step2_14, step2_15, step2_16, step2_17, step2_18, step2_19, step2_20; |
| int step2_21, step2_22, step2_23, step2_24, step2_25, step2_26, step2_27; |
| int step2_28, step2_29, step2_30, step2_31; |
| int step3_8, step3_9, step3_10, step3_11, step3_12, step3_13, step3_14; |
| int step3_15, step3_16, step3_17, step3_18, step3_19, step3_20, step3_21; |
| int step3_22, step3_23, step3_24, step3_25, step3_26, step3_27, step3_28; |
| int step3_29, step3_30, step3_31; |
| int temp0, temp1, temp2, temp3; |
| int load1, load2, load3, load4; |
| int result1, result2; |
| int i; |
| uint8_t *dest_pix, *dest_pix1; |
| const int const_2_power_13 = 8192; |
| uint8_t *cm = vpx_ff_cropTbl; |
| |
| /* prefetch vpx_ff_cropTbl */ |
| prefetch_load(vpx_ff_cropTbl); |
| prefetch_load(vpx_ff_cropTbl + 32); |
| prefetch_load(vpx_ff_cropTbl + 64); |
| prefetch_load(vpx_ff_cropTbl + 96); |
| prefetch_load(vpx_ff_cropTbl + 128); |
| prefetch_load(vpx_ff_cropTbl + 160); |
| prefetch_load(vpx_ff_cropTbl + 192); |
| prefetch_load(vpx_ff_cropTbl + 224); |
| |
| for (i = 0; i < 32; ++i) { |
| dest_pix = dest + i; |
| dest_pix1 = dest + i + 31 * stride; |
| |
| __asm__ __volatile__( |
| "lh %[load1], 2(%[input]) \n\t" |
| "lh %[load2], 62(%[input]) \n\t" |
| "lh %[load3], 34(%[input]) \n\t" |
| "lh %[load4], 30(%[input]) \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "madd $ac1, %[load1], %[cospi_31_64] \n\t" |
| "msub $ac1, %[load2], %[cospi_1_64] \n\t" |
| "extp %[temp0], $ac1, 31 \n\t" |
| |
| "madd $ac3, %[load1], %[cospi_1_64] \n\t" |
| "madd $ac3, %[load2], %[cospi_31_64] \n\t" |
| "extp %[temp3], $ac3, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac2 \n\t" |
| "mthi $zero, $ac2 \n\t" |
| |
| "madd $ac2, %[load3], %[cospi_15_64] \n\t" |
| "msub $ac2, %[load4], %[cospi_17_64] \n\t" |
| "extp %[temp1], $ac2, 31 \n\t" |
| |
| "madd $ac1, %[load3], %[cospi_17_64] \n\t" |
| "madd $ac1, %[load4], %[cospi_15_64] \n\t" |
| "extp %[temp2], $ac1, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "sub %[load1], %[temp3], %[temp2] \n\t" |
| "sub %[load2], %[temp0], %[temp1] \n\t" |
| |
| "madd $ac1, %[load1], %[cospi_28_64] \n\t" |
| "msub $ac1, %[load2], %[cospi_4_64] \n\t" |
| "madd $ac3, %[load1], %[cospi_4_64] \n\t" |
| "madd $ac3, %[load2], %[cospi_28_64] \n\t" |
| |
| "extp %[step1_17], $ac1, 31 \n\t" |
| "extp %[step1_30], $ac3, 31 \n\t" |
| "add %[step1_16], %[temp0], %[temp1] \n\t" |
| "add %[step1_31], %[temp2], %[temp3] \n\t" |
| |
| : [load1] "=&r"(load1), [load2] "=&r"(load2), [load3] "=&r"(load3), |
| [load4] "=&r"(load4), [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), |
| [temp2] "=&r"(temp2), [temp3] "=&r"(temp3), |
| [step1_16] "=&r"(step1_16), [step1_17] "=&r"(step1_17), |
| [step1_30] "=&r"(step1_30), [step1_31] "=&r"(step1_31) |
| : [const_2_power_13] "r"(const_2_power_13), [input] "r"(input), |
| [cospi_31_64] "r"(cospi_31_64), [cospi_1_64] "r"(cospi_1_64), |
| [cospi_4_64] "r"(cospi_4_64), [cospi_17_64] "r"(cospi_17_64), |
| [cospi_15_64] "r"(cospi_15_64), [cospi_28_64] "r"(cospi_28_64)); |
| |
| __asm__ __volatile__( |
| "lh %[load1], 18(%[input]) \n\t" |
| "lh %[load2], 46(%[input]) \n\t" |
| "lh %[load3], 50(%[input]) \n\t" |
| "lh %[load4], 14(%[input]) \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "madd $ac1, %[load1], %[cospi_23_64] \n\t" |
| "msub $ac1, %[load2], %[cospi_9_64] \n\t" |
| "extp %[temp0], $ac1, 31 \n\t" |
| |
| "madd $ac3, %[load1], %[cospi_9_64] \n\t" |
| "madd $ac3, %[load2], %[cospi_23_64] \n\t" |
| "extp %[temp3], $ac3, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac2 \n\t" |
| "mthi $zero, $ac2 \n\t" |
| |
| "madd $ac2, %[load3], %[cospi_7_64] \n\t" |
| "msub $ac2, %[load4], %[cospi_25_64] \n\t" |
| "extp %[temp1], $ac2, 31 \n\t" |
| |
| "madd $ac1, %[load3], %[cospi_25_64] \n\t" |
| "madd $ac1, %[load4], %[cospi_7_64] \n\t" |
| "extp %[temp2], $ac1, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "sub %[load1], %[temp1], %[temp0] \n\t" |
| "sub %[load2], %[temp2], %[temp3] \n\t" |
| |
| "msub $ac1, %[load1], %[cospi_28_64] \n\t" |
| "msub $ac1, %[load2], %[cospi_4_64] \n\t" |
| "msub $ac3, %[load1], %[cospi_4_64] \n\t" |
| "madd $ac3, %[load2], %[cospi_28_64] \n\t" |
| |
| "extp %[step1_18], $ac1, 31 \n\t" |
| "extp %[step1_29], $ac3, 31 \n\t" |
| "add %[step1_19], %[temp0], %[temp1] \n\t" |
| "add %[step1_28], %[temp2], %[temp3] \n\t" |
| |
| : [load1] "=&r"(load1), [load2] "=&r"(load2), [load3] "=&r"(load3), |
| [load4] "=&r"(load4), [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), |
| [temp2] "=&r"(temp2), [temp3] "=&r"(temp3), |
| [step1_18] "=&r"(step1_18), [step1_19] "=&r"(step1_19), |
| [step1_28] "=&r"(step1_28), [step1_29] "=&r"(step1_29) |
| : [const_2_power_13] "r"(const_2_power_13), [input] "r"(input), |
| [cospi_23_64] "r"(cospi_23_64), [cospi_9_64] "r"(cospi_9_64), |
| [cospi_4_64] "r"(cospi_4_64), [cospi_7_64] "r"(cospi_7_64), |
| [cospi_25_64] "r"(cospi_25_64), [cospi_28_64] "r"(cospi_28_64)); |
| |
| __asm__ __volatile__( |
| "lh %[load1], 10(%[input]) \n\t" |
| "lh %[load2], 54(%[input]) \n\t" |
| "lh %[load3], 42(%[input]) \n\t" |
| "lh %[load4], 22(%[input]) \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "madd $ac1, %[load1], %[cospi_27_64] \n\t" |
| "msub $ac1, %[load2], %[cospi_5_64] \n\t" |
| "extp %[temp0], $ac1, 31 \n\t" |
| |
| "madd $ac3, %[load1], %[cospi_5_64] \n\t" |
| "madd $ac3, %[load2], %[cospi_27_64] \n\t" |
| "extp %[temp3], $ac3, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac2 \n\t" |
| "mthi $zero, $ac2 \n\t" |
| |
| "madd $ac2, %[load3], %[cospi_11_64] \n\t" |
| "msub $ac2, %[load4], %[cospi_21_64] \n\t" |
| "extp %[temp1], $ac2, 31 \n\t" |
| |
| "madd $ac1, %[load3], %[cospi_21_64] \n\t" |
| "madd $ac1, %[load4], %[cospi_11_64] \n\t" |
| "extp %[temp2], $ac1, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "sub %[load1], %[temp0], %[temp1] \n\t" |
| "sub %[load2], %[temp3], %[temp2] \n\t" |
| |
| "madd $ac1, %[load2], %[cospi_12_64] \n\t" |
| "msub $ac1, %[load1], %[cospi_20_64] \n\t" |
| "madd $ac3, %[load1], %[cospi_12_64] \n\t" |
| "madd $ac3, %[load2], %[cospi_20_64] \n\t" |
| |
| "extp %[step1_21], $ac1, 31 \n\t" |
| "extp %[step1_26], $ac3, 31 \n\t" |
| "add %[step1_20], %[temp0], %[temp1] \n\t" |
| "add %[step1_27], %[temp2], %[temp3] \n\t" |
| |
| : [load1] "=&r"(load1), [load2] "=&r"(load2), [load3] "=&r"(load3), |
| [load4] "=&r"(load4), [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), |
| [temp2] "=&r"(temp2), [temp3] "=&r"(temp3), |
| [step1_20] "=&r"(step1_20), [step1_21] "=&r"(step1_21), |
| [step1_26] "=&r"(step1_26), [step1_27] "=&r"(step1_27) |
| : [const_2_power_13] "r"(const_2_power_13), [input] "r"(input), |
| [cospi_27_64] "r"(cospi_27_64), [cospi_5_64] "r"(cospi_5_64), |
| [cospi_11_64] "r"(cospi_11_64), [cospi_21_64] "r"(cospi_21_64), |
| [cospi_12_64] "r"(cospi_12_64), [cospi_20_64] "r"(cospi_20_64)); |
| |
| __asm__ __volatile__( |
| "lh %[load1], 26(%[input]) \n\t" |
| "lh %[load2], 38(%[input]) \n\t" |
| "lh %[load3], 58(%[input]) \n\t" |
| "lh %[load4], 6(%[input]) \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "madd $ac1, %[load1], %[cospi_19_64] \n\t" |
| "msub $ac1, %[load2], %[cospi_13_64] \n\t" |
| "extp %[temp0], $ac1, 31 \n\t" |
| "madd $ac3, %[load1], %[cospi_13_64] \n\t" |
| "madd $ac3, %[load2], %[cospi_19_64] \n\t" |
| "extp %[temp3], $ac3, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac2 \n\t" |
| "mthi $zero, $ac2 \n\t" |
| |
| "madd $ac2, %[load3], %[cospi_3_64] \n\t" |
| "msub $ac2, %[load4], %[cospi_29_64] \n\t" |
| "extp %[temp1], $ac2, 31 \n\t" |
| "madd $ac1, %[load3], %[cospi_29_64] \n\t" |
| "madd $ac1, %[load4], %[cospi_3_64] \n\t" |
| "extp %[temp2], $ac1, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "sub %[load1], %[temp1], %[temp0] \n\t" |
| "sub %[load2], %[temp2], %[temp3] \n\t" |
| "msub $ac1, %[load1], %[cospi_12_64] \n\t" |
| "msub $ac1, %[load2], %[cospi_20_64] \n\t" |
| "msub $ac3, %[load1], %[cospi_20_64] \n\t" |
| "madd $ac3, %[load2], %[cospi_12_64] \n\t" |
| "extp %[step1_22], $ac1, 31 \n\t" |
| "extp %[step1_25], $ac3, 31 \n\t" |
| "add %[step1_23], %[temp0], %[temp1] \n\t" |
| "add %[step1_24], %[temp2], %[temp3] \n\t" |
| |
| : [load1] "=&r"(load1), [load2] "=&r"(load2), [load3] "=&r"(load3), |
| [load4] "=&r"(load4), [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), |
| [temp2] "=&r"(temp2), [temp3] "=&r"(temp3), |
| [step1_22] "=&r"(step1_22), [step1_23] "=&r"(step1_23), |
| [step1_24] "=&r"(step1_24), [step1_25] "=&r"(step1_25) |
| : [const_2_power_13] "r"(const_2_power_13), [input] "r"(input), |
| [cospi_19_64] "r"(cospi_19_64), [cospi_13_64] "r"(cospi_13_64), |
| [cospi_3_64] "r"(cospi_3_64), [cospi_29_64] "r"(cospi_29_64), |
| [cospi_12_64] "r"(cospi_12_64), [cospi_20_64] "r"(cospi_20_64)); |
| |
| __asm__ __volatile__( |
| "lh %[load1], 4(%[input]) \n\t" |
| "lh %[load2], 60(%[input]) \n\t" |
| "lh %[load3], 36(%[input]) \n\t" |
| "lh %[load4], 28(%[input]) \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "madd $ac1, %[load1], %[cospi_30_64] \n\t" |
| "msub $ac1, %[load2], %[cospi_2_64] \n\t" |
| "extp %[temp0], $ac1, 31 \n\t" |
| "madd $ac3, %[load1], %[cospi_2_64] \n\t" |
| "madd $ac3, %[load2], %[cospi_30_64] \n\t" |
| "extp %[temp3], $ac3, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac2 \n\t" |
| "mthi $zero, $ac2 \n\t" |
| |
| "madd $ac2, %[load3], %[cospi_14_64] \n\t" |
| "msub $ac2, %[load4], %[cospi_18_64] \n\t" |
| "extp %[temp1], $ac2, 31 \n\t" |
| "madd $ac1, %[load3], %[cospi_18_64] \n\t" |
| "madd $ac1, %[load4], %[cospi_14_64] \n\t" |
| "extp %[temp2], $ac1, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "sub %[load1], %[temp0], %[temp1] \n\t" |
| "sub %[load2], %[temp3], %[temp2] \n\t" |
| "msub $ac1, %[load1], %[cospi_8_64] \n\t" |
| "madd $ac1, %[load2], %[cospi_24_64] \n\t" |
| "madd $ac3, %[load1], %[cospi_24_64] \n\t" |
| "madd $ac3, %[load2], %[cospi_8_64] \n\t" |
| "extp %[step2_9], $ac1, 31 \n\t" |
| "extp %[step2_14], $ac3, 31 \n\t" |
| "add %[step2_8], %[temp0], %[temp1] \n\t" |
| "add %[step2_15], %[temp2], %[temp3] \n\t" |
| |
| : [load1] "=&r"(load1), [load2] "=&r"(load2), [load3] "=&r"(load3), |
| [load4] "=&r"(load4), [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), |
| [temp2] "=&r"(temp2), [temp3] "=&r"(temp3), [step2_8] "=&r"(step2_8), |
| [step2_9] "=&r"(step2_9), [step2_14] "=&r"(step2_14), |
| [step2_15] "=&r"(step2_15) |
| : [const_2_power_13] "r"(const_2_power_13), [input] "r"(input), |
| [cospi_30_64] "r"(cospi_30_64), [cospi_2_64] "r"(cospi_2_64), |
| [cospi_14_64] "r"(cospi_14_64), [cospi_18_64] "r"(cospi_18_64), |
| [cospi_8_64] "r"(cospi_8_64), [cospi_24_64] "r"(cospi_24_64)); |
| |
| __asm__ __volatile__( |
| "lh %[load1], 20(%[input]) \n\t" |
| "lh %[load2], 44(%[input]) \n\t" |
| "lh %[load3], 52(%[input]) \n\t" |
| "lh %[load4], 12(%[input]) \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "madd $ac1, %[load1], %[cospi_22_64] \n\t" |
| "msub $ac1, %[load2], %[cospi_10_64] \n\t" |
| "extp %[temp0], $ac1, 31 \n\t" |
| "madd $ac3, %[load1], %[cospi_10_64] \n\t" |
| "madd $ac3, %[load2], %[cospi_22_64] \n\t" |
| "extp %[temp3], $ac3, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac2 \n\t" |
| "mthi $zero, $ac2 \n\t" |
| |
| "madd $ac2, %[load3], %[cospi_6_64] \n\t" |
| "msub $ac2, %[load4], %[cospi_26_64] \n\t" |
| "extp %[temp1], $ac2, 31 \n\t" |
| "madd $ac1, %[load3], %[cospi_26_64] \n\t" |
| "madd $ac1, %[load4], %[cospi_6_64] \n\t" |
| "extp %[temp2], $ac1, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "sub %[load1], %[temp1], %[temp0] \n\t" |
| "sub %[load2], %[temp2], %[temp3] \n\t" |
| "msub $ac1, %[load1], %[cospi_24_64] \n\t" |
| "msub $ac1, %[load2], %[cospi_8_64] \n\t" |
| "madd $ac3, %[load2], %[cospi_24_64] \n\t" |
| "msub $ac3, %[load1], %[cospi_8_64] \n\t" |
| "extp %[step2_10], $ac1, 31 \n\t" |
| "extp %[step2_13], $ac3, 31 \n\t" |
| "add %[step2_11], %[temp0], %[temp1] \n\t" |
| "add %[step2_12], %[temp2], %[temp3] \n\t" |
| |
| : [load1] "=&r"(load1), [load2] "=&r"(load2), [load3] "=&r"(load3), |
| [load4] "=&r"(load4), [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), |
| [temp2] "=&r"(temp2), [temp3] "=&r"(temp3), |
| [step2_10] "=&r"(step2_10), [step2_11] "=&r"(step2_11), |
| [step2_12] "=&r"(step2_12), [step2_13] "=&r"(step2_13) |
| : [const_2_power_13] "r"(const_2_power_13), [input] "r"(input), |
| [cospi_22_64] "r"(cospi_22_64), [cospi_10_64] "r"(cospi_10_64), |
| [cospi_6_64] "r"(cospi_6_64), [cospi_26_64] "r"(cospi_26_64), |
| [cospi_8_64] "r"(cospi_8_64), [cospi_24_64] "r"(cospi_24_64)); |
| |
| __asm__ __volatile__( |
| "mtlo %[const_2_power_13], $ac0 \n\t" |
| "mthi $zero, $ac0 \n\t" |
| "sub %[temp0], %[step2_14], %[step2_13] \n\t" |
| "sub %[temp0], %[temp0], %[step2_9] \n\t" |
| "add %[temp0], %[temp0], %[step2_10] \n\t" |
| "madd $ac0, %[temp0], %[cospi_16_64] \n\t" |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "sub %[temp1], %[step2_14], %[step2_13] \n\t" |
| "add %[temp1], %[temp1], %[step2_9] \n\t" |
| "sub %[temp1], %[temp1], %[step2_10] \n\t" |
| "madd $ac1, %[temp1], %[cospi_16_64] \n\t" |
| "mtlo %[const_2_power_13], $ac2 \n\t" |
| "mthi $zero, $ac2 \n\t" |
| "sub %[temp0], %[step2_15], %[step2_12] \n\t" |
| "sub %[temp0], %[temp0], %[step2_8] \n\t" |
| "add %[temp0], %[temp0], %[step2_11] \n\t" |
| "madd $ac2, %[temp0], %[cospi_16_64] \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| "sub %[temp1], %[step2_15], %[step2_12] \n\t" |
| "add %[temp1], %[temp1], %[step2_8] \n\t" |
| "sub %[temp1], %[temp1], %[step2_11] \n\t" |
| "madd $ac3, %[temp1], %[cospi_16_64] \n\t" |
| |
| "add %[step3_8], %[step2_8], %[step2_11] \n\t" |
| "add %[step3_9], %[step2_9], %[step2_10] \n\t" |
| "add %[step3_14], %[step2_13], %[step2_14] \n\t" |
| "add %[step3_15], %[step2_12], %[step2_15] \n\t" |
| "extp %[step3_10], $ac0, 31 \n\t" |
| "extp %[step3_13], $ac1, 31 \n\t" |
| "extp %[step3_11], $ac2, 31 \n\t" |
| "extp %[step3_12], $ac3, 31 \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), [step3_8] "=&r"(step3_8), |
| [step3_9] "=&r"(step3_9), [step3_10] "=&r"(step3_10), |
| [step3_11] "=&r"(step3_11), [step3_12] "=&r"(step3_12), |
| [step3_13] "=&r"(step3_13), [step3_14] "=&r"(step3_14), |
| [step3_15] "=&r"(step3_15) |
| : [const_2_power_13] "r"(const_2_power_13), [step2_8] "r"(step2_8), |
| [step2_9] "r"(step2_9), [step2_10] "r"(step2_10), |
| [step2_11] "r"(step2_11), [step2_12] "r"(step2_12), |
| [step2_13] "r"(step2_13), [step2_14] "r"(step2_14), |
| [step2_15] "r"(step2_15), [cospi_16_64] "r"(cospi_16_64)); |
| |
| __asm__ __volatile__( |
| "mtlo %[const_2_power_13], $ac0 \n\t" |
| "mthi $zero, $ac0 \n\t" |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "sub %[temp0], %[step1_17], %[step1_18] \n\t" |
| "sub %[temp1], %[step1_30], %[step1_29] \n\t" |
| "add %[step3_17], %[step1_17], %[step1_18] \n\t" |
| "add %[step3_30], %[step1_30], %[step1_29] \n\t" |
| |
| "msub $ac0, %[temp0], %[cospi_8_64] \n\t" |
| "madd $ac0, %[temp1], %[cospi_24_64] \n\t" |
| "extp %[step3_18], $ac0, 31 \n\t" |
| "madd $ac1, %[temp0], %[cospi_24_64] \n\t" |
| "madd $ac1, %[temp1], %[cospi_8_64] \n\t" |
| "extp %[step3_29], $ac1, 31 \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), |
| [step3_18] "=&r"(step3_18), [step3_29] "=&r"(step3_29), |
| [step3_17] "=&r"(step3_17), [step3_30] "=&r"(step3_30) |
| : [const_2_power_13] "r"(const_2_power_13), [step1_17] "r"(step1_17), |
| [step1_18] "r"(step1_18), [step1_30] "r"(step1_30), |
| [step1_29] "r"(step1_29), [cospi_24_64] "r"(cospi_24_64), |
| [cospi_8_64] "r"(cospi_8_64)); |
| |
| __asm__ __volatile__( |
| "mtlo %[const_2_power_13], $ac0 \n\t" |
| "mthi $zero, $ac0 \n\t" |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "sub %[temp0], %[step1_16], %[step1_19] \n\t" |
| "sub %[temp1], %[step1_31], %[step1_28] \n\t" |
| "add %[step3_16], %[step1_16], %[step1_19] \n\t" |
| "add %[step3_31], %[step1_31], %[step1_28] \n\t" |
| |
| "msub $ac0, %[temp0], %[cospi_8_64] \n\t" |
| "madd $ac0, %[temp1], %[cospi_24_64] \n\t" |
| "extp %[step3_19], $ac0, 31 \n\t" |
| "madd $ac1, %[temp0], %[cospi_24_64] \n\t" |
| "madd $ac1, %[temp1], %[cospi_8_64] \n\t" |
| "extp %[step3_28], $ac1, 31 \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), |
| [step3_16] "=&r"(step3_16), [step3_31] "=&r"(step3_31), |
| [step3_19] "=&r"(step3_19), [step3_28] "=&r"(step3_28) |
| : [const_2_power_13] "r"(const_2_power_13), [step1_16] "r"(step1_16), |
| [step1_19] "r"(step1_19), [step1_31] "r"(step1_31), |
| [step1_28] "r"(step1_28), [cospi_24_64] "r"(cospi_24_64), |
| [cospi_8_64] "r"(cospi_8_64)); |
| |
| __asm__ __volatile__( |
| "mtlo %[const_2_power_13], $ac0 \n\t" |
| "mthi $zero, $ac0 \n\t" |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "sub %[temp0], %[step1_23], %[step1_20] \n\t" |
| "sub %[temp1], %[step1_24], %[step1_27] \n\t" |
| "add %[step3_23], %[step1_23], %[step1_20] \n\t" |
| "add %[step3_24], %[step1_24], %[step1_27] \n\t" |
| |
| "msub $ac0, %[temp0], %[cospi_8_64] \n\t" |
| "madd $ac0, %[temp1], %[cospi_24_64] \n\t" |
| "extp %[step3_27], $ac0, 31 \n\t" |
| "msub $ac1, %[temp0], %[cospi_24_64] \n\t" |
| "msub $ac1, %[temp1], %[cospi_8_64] \n\t" |
| "extp %[step3_20], $ac1, 31 \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), |
| [step3_23] "=&r"(step3_23), [step3_24] "=&r"(step3_24), |
| [step3_20] "=&r"(step3_20), [step3_27] "=&r"(step3_27) |
| : [const_2_power_13] "r"(const_2_power_13), [step1_23] "r"(step1_23), |
| [step1_20] "r"(step1_20), [step1_24] "r"(step1_24), |
| [step1_27] "r"(step1_27), [cospi_24_64] "r"(cospi_24_64), |
| [cospi_8_64] "r"(cospi_8_64)); |
| |
| __asm__ __volatile__( |
| "mtlo %[const_2_power_13], $ac0 \n\t" |
| "mthi $zero, $ac0 \n\t" |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "sub %[temp0], %[step1_22], %[step1_21] \n\t" |
| "sub %[temp1], %[step1_25], %[step1_26] \n\t" |
| "add %[step3_22], %[step1_22], %[step1_21] \n\t" |
| "add %[step3_25], %[step1_25], %[step1_26] \n\t" |
| |
| "msub $ac0, %[temp0], %[cospi_24_64] \n\t" |
| "msub $ac0, %[temp1], %[cospi_8_64] \n\t" |
| "extp %[step3_21], $ac0, 31 \n\t" |
| "msub $ac1, %[temp0], %[cospi_8_64] \n\t" |
| "madd $ac1, %[temp1], %[cospi_24_64] \n\t" |
| "extp %[step3_26], $ac1, 31 \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), |
| [step3_22] "=&r"(step3_22), [step3_25] "=&r"(step3_25), |
| [step3_21] "=&r"(step3_21), [step3_26] "=&r"(step3_26) |
| : [const_2_power_13] "r"(const_2_power_13), [step1_22] "r"(step1_22), |
| [step1_21] "r"(step1_21), [step1_25] "r"(step1_25), |
| [step1_26] "r"(step1_26), [cospi_24_64] "r"(cospi_24_64), |
| [cospi_8_64] "r"(cospi_8_64)); |
| |
| __asm__ __volatile__( |
| "add %[step2_16], %[step3_16], %[step3_23] \n\t" |
| "add %[step2_17], %[step3_17], %[step3_22] \n\t" |
| "add %[step2_18], %[step3_18], %[step3_21] \n\t" |
| "add %[step2_19], %[step3_19], %[step3_20] \n\t" |
| "sub %[step2_20], %[step3_19], %[step3_20] \n\t" |
| "sub %[step2_21], %[step3_18], %[step3_21] \n\t" |
| "sub %[step2_22], %[step3_17], %[step3_22] \n\t" |
| "sub %[step2_23], %[step3_16], %[step3_23] \n\t" |
| |
| : [step2_16] "=&r"(step2_16), [step2_17] "=&r"(step2_17), |
| [step2_18] "=&r"(step2_18), [step2_19] "=&r"(step2_19), |
| [step2_20] "=&r"(step2_20), [step2_21] "=&r"(step2_21), |
| [step2_22] "=&r"(step2_22), [step2_23] "=&r"(step2_23) |
| : [step3_16] "r"(step3_16), [step3_23] "r"(step3_23), |
| [step3_17] "r"(step3_17), [step3_22] "r"(step3_22), |
| [step3_18] "r"(step3_18), [step3_21] "r"(step3_21), |
| [step3_19] "r"(step3_19), [step3_20] "r"(step3_20)); |
| |
| __asm__ __volatile__( |
| "sub %[step2_24], %[step3_31], %[step3_24] \n\t" |
| "sub %[step2_25], %[step3_30], %[step3_25] \n\t" |
| "sub %[step2_26], %[step3_29], %[step3_26] \n\t" |
| "sub %[step2_27], %[step3_28], %[step3_27] \n\t" |
| "add %[step2_28], %[step3_28], %[step3_27] \n\t" |
| "add %[step2_29], %[step3_29], %[step3_26] \n\t" |
| "add %[step2_30], %[step3_30], %[step3_25] \n\t" |
| "add %[step2_31], %[step3_31], %[step3_24] \n\t" |
| |
| : [step2_24] "=&r"(step2_24), [step2_28] "=&r"(step2_28), |
| [step2_25] "=&r"(step2_25), [step2_29] "=&r"(step2_29), |
| [step2_26] "=&r"(step2_26), [step2_30] "=&r"(step2_30), |
| [step2_27] "=&r"(step2_27), [step2_31] "=&r"(step2_31) |
| : [step3_31] "r"(step3_31), [step3_24] "r"(step3_24), |
| [step3_30] "r"(step3_30), [step3_25] "r"(step3_25), |
| [step3_29] "r"(step3_29), [step3_26] "r"(step3_26), |
| [step3_28] "r"(step3_28), [step3_27] "r"(step3_27)); |
| |
| __asm__ __volatile__( |
| "lh %[load1], 0(%[input]) \n\t" |
| "lh %[load2], 32(%[input]) \n\t" |
| "lh %[load3], 16(%[input]) \n\t" |
| "lh %[load4], 48(%[input]) \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac2 \n\t" |
| "mthi $zero, $ac2 \n\t" |
| "add %[result1], %[load1], %[load2] \n\t" |
| "sub %[result2], %[load1], %[load2] \n\t" |
| "madd $ac1, %[result1], %[cospi_16_64] \n\t" |
| "madd $ac2, %[result2], %[cospi_16_64] \n\t" |
| "extp %[temp0], $ac1, 31 \n\t" |
| "extp %[temp1], $ac2, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| "madd $ac3, %[load3], %[cospi_24_64] \n\t" |
| "msub $ac3, %[load4], %[cospi_8_64] \n\t" |
| "extp %[temp2], $ac3, 31 \n\t" |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "madd $ac1, %[load3], %[cospi_8_64] \n\t" |
| "madd $ac1, %[load4], %[cospi_24_64] \n\t" |
| "extp %[temp3], $ac1, 31 \n\t" |
| "add %[step1_0], %[temp0], %[temp3] \n\t" |
| "add %[step1_1], %[temp1], %[temp2] \n\t" |
| "sub %[step1_2], %[temp1], %[temp2] \n\t" |
| "sub %[step1_3], %[temp0], %[temp3] \n\t" |
| |
| : [load1] "=&r"(load1), [load2] "=&r"(load2), [load3] "=&r"(load3), |
| [load4] "=&r"(load4), [result1] "=&r"(result1), |
| [result2] "=&r"(result2), [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), |
| [temp2] "=&r"(temp2), [temp3] "=&r"(temp3), [step1_0] "=&r"(step1_0), |
| [step1_1] "=&r"(step1_1), [step1_2] "=&r"(step1_2), |
| [step1_3] "=&r"(step1_3) |
| : [const_2_power_13] "r"(const_2_power_13), [input] "r"(input), |
| [cospi_24_64] "r"(cospi_24_64), [cospi_8_64] "r"(cospi_8_64), |
| [cospi_16_64] "r"(cospi_16_64)); |
| |
| __asm__ __volatile__( |
| "lh %[load1], 8(%[input]) \n\t" |
| "lh %[load2], 56(%[input]) \n\t" |
| "lh %[load3], 40(%[input]) \n\t" |
| "lh %[load4], 24(%[input]) \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "madd $ac1, %[load1], %[cospi_28_64] \n\t" |
| "msub $ac1, %[load2], %[cospi_4_64] \n\t" |
| "extp %[temp0], $ac1, 31 \n\t" |
| "madd $ac3, %[load1], %[cospi_4_64] \n\t" |
| "madd $ac3, %[load2], %[cospi_28_64] \n\t" |
| "extp %[temp3], $ac3, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac2 \n\t" |
| "mthi $zero, $ac2 \n\t" |
| |
| "madd $ac2, %[load3], %[cospi_12_64] \n\t" |
| "msub $ac2, %[load4], %[cospi_20_64] \n\t" |
| "extp %[temp1], $ac2, 31 \n\t" |
| "madd $ac1, %[load3], %[cospi_20_64] \n\t" |
| "madd $ac1, %[load4], %[cospi_12_64] \n\t" |
| "extp %[temp2], $ac1, 31 \n\t" |
| |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "sub %[load1], %[temp3], %[temp2] \n\t" |
| "sub %[load1], %[load1], %[temp0] \n\t" |
| "add %[load1], %[load1], %[temp1] \n\t" |
| "sub %[load2], %[temp0], %[temp1] \n\t" |
| "sub %[load2], %[load2], %[temp2] \n\t" |
| "add %[load2], %[load2], %[temp3] \n\t" |
| "madd $ac1, %[load1], %[cospi_16_64] \n\t" |
| "madd $ac3, %[load2], %[cospi_16_64] \n\t" |
| |
| "extp %[step1_5], $ac1, 31 \n\t" |
| "extp %[step1_6], $ac3, 31 \n\t" |
| "add %[step1_4], %[temp0], %[temp1] \n\t" |
| "add %[step1_7], %[temp3], %[temp2] \n\t" |
| |
| : [load1] "=&r"(load1), [load2] "=&r"(load2), [load3] "=&r"(load3), |
| [load4] "=&r"(load4), [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), |
| [temp2] "=&r"(temp2), [temp3] "=&r"(temp3), [step1_4] "=&r"(step1_4), |
| [step1_5] "=&r"(step1_5), [step1_6] "=&r"(step1_6), |
| [step1_7] "=&r"(step1_7) |
| : [const_2_power_13] "r"(const_2_power_13), [input] "r"(input), |
| [cospi_20_64] "r"(cospi_20_64), [cospi_12_64] "r"(cospi_12_64), |
| [cospi_4_64] "r"(cospi_4_64), [cospi_28_64] "r"(cospi_28_64), |
| [cospi_16_64] "r"(cospi_16_64)); |
| |
| __asm__ __volatile__( |
| "add %[step2_0], %[step1_0], %[step1_7] \n\t" |
| "add %[step2_1], %[step1_1], %[step1_6] \n\t" |
| "add %[step2_2], %[step1_2], %[step1_5] \n\t" |
| "add %[step2_3], %[step1_3], %[step1_4] \n\t" |
| "sub %[step2_4], %[step1_3], %[step1_4] \n\t" |
| "sub %[step2_5], %[step1_2], %[step1_5] \n\t" |
| "sub %[step2_6], %[step1_1], %[step1_6] \n\t" |
| "sub %[step2_7], %[step1_0], %[step1_7] \n\t" |
| |
| : [step2_0] "=&r"(step2_0), [step2_4] "=&r"(step2_4), |
| [step2_1] "=&r"(step2_1), [step2_5] "=&r"(step2_5), |
| [step2_2] "=&r"(step2_2), [step2_6] "=&r"(step2_6), |
| [step2_3] "=&r"(step2_3), [step2_7] "=&r"(step2_7) |
| : [step1_0] "r"(step1_0), [step1_7] "r"(step1_7), |
| [step1_1] "r"(step1_1), [step1_6] "r"(step1_6), |
| [step1_2] "r"(step1_2), [step1_5] "r"(step1_5), |
| [step1_3] "r"(step1_3), [step1_4] "r"(step1_4)); |
| |
| // stage 7 |
| __asm__ __volatile__( |
| "add %[step1_0], %[step2_0], %[step3_15] \n\t" |
| "add %[step1_1], %[step2_1], %[step3_14] \n\t" |
| "add %[step1_2], %[step2_2], %[step3_13] \n\t" |
| "add %[step1_3], %[step2_3], %[step3_12] \n\t" |
| "sub %[step1_12], %[step2_3], %[step3_12] \n\t" |
| "sub %[step1_13], %[step2_2], %[step3_13] \n\t" |
| "sub %[step1_14], %[step2_1], %[step3_14] \n\t" |
| "sub %[step1_15], %[step2_0], %[step3_15] \n\t" |
| |
| : [step1_0] "=&r"(step1_0), [step1_12] "=&r"(step1_12), |
| [step1_1] "=&r"(step1_1), [step1_13] "=&r"(step1_13), |
| [step1_2] "=&r"(step1_2), [step1_14] "=&r"(step1_14), |
| [step1_3] "=&r"(step1_3), [step1_15] "=&r"(step1_15) |
| : [step2_0] "r"(step2_0), [step3_15] "r"(step3_15), |
| [step2_1] "r"(step2_1), [step3_14] "r"(step3_14), |
| [step2_2] "r"(step2_2), [step3_13] "r"(step3_13), |
| [step2_3] "r"(step2_3), [step3_12] "r"(step3_12)); |
| |
| __asm__ __volatile__( |
| "add %[step1_4], %[step2_4], %[step3_11] \n\t" |
| "add %[step1_5], %[step2_5], %[step3_10] \n\t" |
| "add %[step1_6], %[step2_6], %[step3_9] \n\t" |
| "add %[step1_7], %[step2_7], %[step3_8] \n\t" |
| "sub %[step1_8], %[step2_7], %[step3_8] \n\t" |
| "sub %[step1_9], %[step2_6], %[step3_9] \n\t" |
| "sub %[step1_10], %[step2_5], %[step3_10] \n\t" |
| "sub %[step1_11], %[step2_4], %[step3_11] \n\t" |
| |
| : [step1_4] "=&r"(step1_4), [step1_8] "=&r"(step1_8), |
| [step1_5] "=&r"(step1_5), [step1_9] "=&r"(step1_9), |
| [step1_6] "=&r"(step1_6), [step1_10] "=&r"(step1_10), |
| [step1_7] "=&r"(step1_7), [step1_11] "=&r"(step1_11) |
| : [step2_4] "r"(step2_4), [step3_11] "r"(step3_11), |
| [step2_5] "r"(step2_5), [step3_10] "r"(step3_10), |
| [step2_6] "r"(step2_6), [step3_9] "r"(step3_9), |
| [step2_7] "r"(step2_7), [step3_8] "r"(step3_8)); |
| |
| __asm__ __volatile__( |
| "sub %[temp0], %[step2_27], %[step2_20] \n\t" |
| "add %[temp1], %[step2_27], %[step2_20] \n\t" |
| "sub %[temp2], %[step2_26], %[step2_21] \n\t" |
| "add %[temp3], %[step2_26], %[step2_21] \n\t" |
| |
| "mtlo %[const_2_power_13], $ac0 \n\t" |
| "mthi $zero, $ac0 \n\t" |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac2 \n\t" |
| "mthi $zero, $ac2 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "madd $ac0, %[temp0], %[cospi_16_64] \n\t" |
| "madd $ac1, %[temp1], %[cospi_16_64] \n\t" |
| "madd $ac2, %[temp2], %[cospi_16_64] \n\t" |
| "madd $ac3, %[temp3], %[cospi_16_64] \n\t" |
| |
| "extp %[step1_20], $ac0, 31 \n\t" |
| "extp %[step1_27], $ac1, 31 \n\t" |
| "extp %[step1_21], $ac2, 31 \n\t" |
| "extp %[step1_26], $ac3, 31 \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), [temp2] "=&r"(temp2), |
| [temp3] "=&r"(temp3), [step1_20] "=&r"(step1_20), |
| [step1_27] "=&r"(step1_27), [step1_21] "=&r"(step1_21), |
| [step1_26] "=&r"(step1_26) |
| : [const_2_power_13] "r"(const_2_power_13), [step2_20] "r"(step2_20), |
| [step2_27] "r"(step2_27), [step2_21] "r"(step2_21), |
| [step2_26] "r"(step2_26), [cospi_16_64] "r"(cospi_16_64)); |
| |
| __asm__ __volatile__( |
| "sub %[temp0], %[step2_25], %[step2_22] \n\t" |
| "add %[temp1], %[step2_25], %[step2_22] \n\t" |
| "sub %[temp2], %[step2_24], %[step2_23] \n\t" |
| "add %[temp3], %[step2_24], %[step2_23] \n\t" |
| |
| "mtlo %[const_2_power_13], $ac0 \n\t" |
| "mthi $zero, $ac0 \n\t" |
| "mtlo %[const_2_power_13], $ac1 \n\t" |
| "mthi $zero, $ac1 \n\t" |
| "mtlo %[const_2_power_13], $ac2 \n\t" |
| "mthi $zero, $ac2 \n\t" |
| "mtlo %[const_2_power_13], $ac3 \n\t" |
| "mthi $zero, $ac3 \n\t" |
| |
| "madd $ac0, %[temp0], %[cospi_16_64] \n\t" |
| "madd $ac1, %[temp1], %[cospi_16_64] \n\t" |
| "madd $ac2, %[temp2], %[cospi_16_64] \n\t" |
| "madd $ac3, %[temp3], %[cospi_16_64] \n\t" |
| |
| "extp %[step1_22], $ac0, 31 \n\t" |
| "extp %[step1_25], $ac1, 31 \n\t" |
| "extp %[step1_23], $ac2, 31 \n\t" |
| "extp %[step1_24], $ac3, 31 \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), [temp2] "=&r"(temp2), |
| [temp3] "=&r"(temp3), [step1_22] "=&r"(step1_22), |
| [step1_25] "=&r"(step1_25), [step1_23] "=&r"(step1_23), |
| [step1_24] "=&r"(step1_24) |
| : [const_2_power_13] "r"(const_2_power_13), [step2_22] "r"(step2_22), |
| [step2_25] "r"(step2_25), [step2_23] "r"(step2_23), |
| [step2_24] "r"(step2_24), [cospi_16_64] "r"(cospi_16_64)); |
| |
| __asm__ __volatile__( |
| "lbu %[temp2], 0(%[dest_pix]) \n\t" |
| "add %[temp0], %[step1_0], %[step2_31] \n\t" |
| "addi %[temp0], %[temp0], 32 \n\t" |
| "sra %[temp0], %[temp0], 6 \n\t" |
| "add %[temp2], %[temp2], %[temp0] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "add %[temp1], %[step1_1], %[step2_30] \n\t" |
| "sb %[temp0], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix]) \n\t" |
| "addi %[temp1], %[temp1], 32 \n\t" |
| "sra %[temp1], %[temp1], 6 \n\t" |
| "add %[temp3], %[temp3], %[temp1] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| |
| "lbu %[temp2], 0(%[dest_pix]) \n\t" |
| "add %[temp0], %[step1_2], %[step2_29] \n\t" |
| "addi %[temp0], %[temp0], 32 \n\t" |
| "sra %[temp0], %[temp0], 6 \n\t" |
| "add %[temp2], %[temp2], %[temp0] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "add %[temp1], %[step1_3], %[step2_28] \n\t" |
| "sb %[temp0], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix]) \n\t" |
| "addi %[temp1], %[temp1], 32 \n\t" |
| "sra %[temp1], %[temp1], 6 \n\t" |
| "add %[temp3], %[temp3], %[temp1] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), [temp2] "=&r"(temp2), |
| [temp3] "=&r"(temp3), [dest_pix] "+r"(dest_pix) |
| : [cm] "r"(cm), [stride] "r"(stride), [step1_0] "r"(step1_0), |
| [step1_1] "r"(step1_1), [step1_2] "r"(step1_2), |
| [step1_3] "r"(step1_3), [step2_28] "r"(step2_28), |
| [step2_29] "r"(step2_29), [step2_30] "r"(step2_30), |
| [step2_31] "r"(step2_31)); |
| |
| step3_12 = ROUND_POWER_OF_TWO((step1_3 - step2_28), 6); |
| step3_13 = ROUND_POWER_OF_TWO((step1_2 - step2_29), 6); |
| step3_14 = ROUND_POWER_OF_TWO((step1_1 - step2_30), 6); |
| step3_15 = ROUND_POWER_OF_TWO((step1_0 - step2_31), 6); |
| |
| __asm__ __volatile__( |
| "lbu %[temp2], 0(%[dest_pix1]) \n\t" |
| "add %[temp2], %[temp2], %[step3_15] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "sb %[temp0], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix1]) \n\t" |
| "add %[temp3], %[temp3], %[step3_14] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| |
| "lbu %[temp2], 0(%[dest_pix1]) \n\t" |
| "add %[temp2], %[temp2], %[step3_13] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "sb %[temp0], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix1]) \n\t" |
| "add %[temp3], %[temp3], %[step3_12] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), [temp2] "=&r"(temp2), |
| [temp3] "=&r"(temp3), [dest_pix1] "+r"(dest_pix1) |
| : [cm] "r"(cm), [stride] "r"(stride), [step3_12] "r"(step3_12), |
| [step3_13] "r"(step3_13), [step3_14] "r"(step3_14), |
| [step3_15] "r"(step3_15)); |
| |
| __asm__ __volatile__( |
| "lbu %[temp2], 0(%[dest_pix]) \n\t" |
| "add %[temp0], %[step1_4], %[step1_27] \n\t" |
| "addi %[temp0], %[temp0], 32 \n\t" |
| "sra %[temp0], %[temp0], 6 \n\t" |
| "add %[temp2], %[temp2], %[temp0] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "add %[temp1], %[step1_5], %[step1_26] \n\t" |
| "sb %[temp0], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix]) \n\t" |
| "addi %[temp1], %[temp1], 32 \n\t" |
| "sra %[temp1], %[temp1], 6 \n\t" |
| "add %[temp3], %[temp3], %[temp1] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| |
| "lbu %[temp2], 0(%[dest_pix]) \n\t" |
| "add %[temp0], %[step1_6], %[step1_25] \n\t" |
| "addi %[temp0], %[temp0], 32 \n\t" |
| "sra %[temp0], %[temp0], 6 \n\t" |
| "add %[temp2], %[temp2], %[temp0] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "add %[temp1], %[step1_7], %[step1_24] \n\t" |
| "sb %[temp0], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix]) \n\t" |
| "addi %[temp1], %[temp1], 32 \n\t" |
| "sra %[temp1], %[temp1], 6 \n\t" |
| "add %[temp3], %[temp3], %[temp1] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), [temp2] "=&r"(temp2), |
| [temp3] "=&r"(temp3), [dest_pix] "+r"(dest_pix) |
| : [cm] "r"(cm), [stride] "r"(stride), [step1_4] "r"(step1_4), |
| [step1_5] "r"(step1_5), [step1_6] "r"(step1_6), |
| [step1_7] "r"(step1_7), [step1_24] "r"(step1_24), |
| [step1_25] "r"(step1_25), [step1_26] "r"(step1_26), |
| [step1_27] "r"(step1_27)); |
| |
| step3_12 = ROUND_POWER_OF_TWO((step1_7 - step1_24), 6); |
| step3_13 = ROUND_POWER_OF_TWO((step1_6 - step1_25), 6); |
| step3_14 = ROUND_POWER_OF_TWO((step1_5 - step1_26), 6); |
| step3_15 = ROUND_POWER_OF_TWO((step1_4 - step1_27), 6); |
| |
| __asm__ __volatile__( |
| "lbu %[temp2], 0(%[dest_pix1]) \n\t" |
| "add %[temp2], %[temp2], %[step3_15] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "sb %[temp0], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix1]) \n\t" |
| "add %[temp3], %[temp3], %[step3_14] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| |
| "lbu %[temp2], 0(%[dest_pix1]) \n\t" |
| "add %[temp2], %[temp2], %[step3_13] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "sb %[temp0], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix1]) \n\t" |
| "add %[temp3], %[temp3], %[step3_12] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), [temp2] "=&r"(temp2), |
| [temp3] "=&r"(temp3), [dest_pix1] "+r"(dest_pix1) |
| : [cm] "r"(cm), [stride] "r"(stride), [step3_12] "r"(step3_12), |
| [step3_13] "r"(step3_13), [step3_14] "r"(step3_14), |
| [step3_15] "r"(step3_15)); |
| |
| __asm__ __volatile__( |
| "lbu %[temp2], 0(%[dest_pix]) \n\t" |
| "add %[temp0], %[step1_8], %[step1_23] \n\t" |
| "addi %[temp0], %[temp0], 32 \n\t" |
| "sra %[temp0], %[temp0], 6 \n\t" |
| "add %[temp2], %[temp2], %[temp0] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "add %[temp1], %[step1_9], %[step1_22] \n\t" |
| "sb %[temp0], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix]) \n\t" |
| "addi %[temp1], %[temp1], 32 \n\t" |
| "sra %[temp1], %[temp1], 6 \n\t" |
| "add %[temp3], %[temp3], %[temp1] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| |
| "lbu %[temp2], 0(%[dest_pix]) \n\t" |
| "add %[temp0], %[step1_10], %[step1_21] \n\t" |
| "addi %[temp0], %[temp0], 32 \n\t" |
| "sra %[temp0], %[temp0], 6 \n\t" |
| "add %[temp2], %[temp2], %[temp0] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "add %[temp1], %[step1_11], %[step1_20] \n\t" |
| "sb %[temp0], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix]) \n\t" |
| "addi %[temp1], %[temp1], 32 \n\t" |
| "sra %[temp1], %[temp1], 6 \n\t" |
| "add %[temp3], %[temp3], %[temp1] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), [temp2] "=&r"(temp2), |
| [temp3] "=&r"(temp3), [dest_pix] "+r"(dest_pix) |
| : [cm] "r"(cm), [stride] "r"(stride), [step1_8] "r"(step1_8), |
| [step1_9] "r"(step1_9), [step1_10] "r"(step1_10), |
| [step1_11] "r"(step1_11), [step1_20] "r"(step1_20), |
| [step1_21] "r"(step1_21), [step1_22] "r"(step1_22), |
| [step1_23] "r"(step1_23)); |
| |
| step3_12 = ROUND_POWER_OF_TWO((step1_11 - step1_20), 6); |
| step3_13 = ROUND_POWER_OF_TWO((step1_10 - step1_21), 6); |
| step3_14 = ROUND_POWER_OF_TWO((step1_9 - step1_22), 6); |
| step3_15 = ROUND_POWER_OF_TWO((step1_8 - step1_23), 6); |
| |
| __asm__ __volatile__( |
| "lbu %[temp2], 0(%[dest_pix1]) \n\t" |
| "add %[temp2], %[temp2], %[step3_15] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "sb %[temp0], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix1]) \n\t" |
| "add %[temp3], %[temp3], %[step3_14] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| |
| "lbu %[temp2], 0(%[dest_pix1]) \n\t" |
| "add %[temp2], %[temp2], %[step3_13] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "sb %[temp0], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix1]) \n\t" |
| "add %[temp3], %[temp3], %[step3_12] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), [temp2] "=&r"(temp2), |
| [temp3] "=&r"(temp3), [dest_pix1] "+r"(dest_pix1) |
| : [cm] "r"(cm), [stride] "r"(stride), [step3_12] "r"(step3_12), |
| [step3_13] "r"(step3_13), [step3_14] "r"(step3_14), |
| [step3_15] "r"(step3_15)); |
| |
| __asm__ __volatile__( |
| "lbu %[temp2], 0(%[dest_pix]) \n\t" |
| "add %[temp0], %[step1_12], %[step2_19] \n\t" |
| "addi %[temp0], %[temp0], 32 \n\t" |
| "sra %[temp0], %[temp0], 6 \n\t" |
| "add %[temp2], %[temp2], %[temp0] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "add %[temp1], %[step1_13], %[step2_18] \n\t" |
| "sb %[temp0], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix]) \n\t" |
| "addi %[temp1], %[temp1], 32 \n\t" |
| "sra %[temp1], %[temp1], 6 \n\t" |
| "add %[temp3], %[temp3], %[temp1] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| |
| "lbu %[temp2], 0(%[dest_pix]) \n\t" |
| "add %[temp0], %[step1_14], %[step2_17] \n\t" |
| "addi %[temp0], %[temp0], 32 \n\t" |
| "sra %[temp0], %[temp0], 6 \n\t" |
| "add %[temp2], %[temp2], %[temp0] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "add %[temp1], %[step1_15], %[step2_16] \n\t" |
| "sb %[temp0], 0(%[dest_pix]) \n\t" |
| "addu %[dest_pix], %[dest_pix], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix]) \n\t" |
| "addi %[temp1], %[temp1], 32 \n\t" |
| "sra %[temp1], %[temp1], 6 \n\t" |
| "add %[temp3], %[temp3], %[temp1] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix]) \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), [temp2] "=&r"(temp2), |
| [temp3] "=&r"(temp3), [dest_pix] "+r"(dest_pix) |
| : [cm] "r"(cm), [stride] "r"(stride), [step1_12] "r"(step1_12), |
| [step1_13] "r"(step1_13), [step1_14] "r"(step1_14), |
| [step1_15] "r"(step1_15), [step2_16] "r"(step2_16), |
| [step2_17] "r"(step2_17), [step2_18] "r"(step2_18), |
| [step2_19] "r"(step2_19)); |
| |
| step3_12 = ROUND_POWER_OF_TWO((step1_15 - step2_16), 6); |
| step3_13 = ROUND_POWER_OF_TWO((step1_14 - step2_17), 6); |
| step3_14 = ROUND_POWER_OF_TWO((step1_13 - step2_18), 6); |
| step3_15 = ROUND_POWER_OF_TWO((step1_12 - step2_19), 6); |
| |
| __asm__ __volatile__( |
| "lbu %[temp2], 0(%[dest_pix1]) \n\t" |
| "add %[temp2], %[temp2], %[step3_15] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "sb %[temp0], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix1]) \n\t" |
| "add %[temp3], %[temp3], %[step3_14] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| |
| "lbu %[temp2], 0(%[dest_pix1]) \n\t" |
| "add %[temp2], %[temp2], %[step3_13] \n\t" |
| "lbux %[temp0], %[temp2](%[cm]) \n\t" |
| "sb %[temp0], 0(%[dest_pix1]) \n\t" |
| "subu %[dest_pix1], %[dest_pix1], %[stride] \n\t" |
| "lbu %[temp3], 0(%[dest_pix1]) \n\t" |
| "add %[temp3], %[temp3], %[step3_12] \n\t" |
| "lbux %[temp1], %[temp3](%[cm]) \n\t" |
| "sb %[temp1], 0(%[dest_pix1]) \n\t" |
| |
| : [temp0] "=&r"(temp0), [temp1] "=&r"(temp1), [temp2] "=&r"(temp2), |
| [temp3] "=&r"(temp3), [dest_pix1] "+r"(dest_pix1) |
| : [cm] "r"(cm), [stride] "r"(stride), [step3_12] "r"(step3_12), |
| [step3_13] "r"(step3_13), [step3_14] "r"(step3_14), |
| [step3_15] "r"(step3_15)); |
| |
| input += 32; |
| } |
| } |
| #endif // #if HAVE_DSPR2 |
