| #!/bin/sh |
| ## |
| ## Copyright (c) 2014 The WebM project authors. All Rights Reserved. |
| ## |
| ## Use of this source code is governed by a BSD-style license |
| ## that can be found in the LICENSE file in the root of the source |
| ## tree. An additional intellectual property rights grant can be found |
| ## in the file PATENTS. All contributing project authors may |
| ## be found in the AUTHORS file in the root of the source tree. |
| ## |
| ## This file tests vpxenc using hantro_collage_w352h288.yuv as input. To add |
| ## new tests to this file, do the following: |
| ## 1. Write a shell function (this is your test). |
| ## 2. Add the function to vpxenc_tests (on a new line). |
| ## |
| . $(dirname $0)/tools_common.sh |
| |
| readonly TEST_FRAMES=10 |
| |
| # Environment check: Make sure input is available. |
| vpxenc_verify_environment() { |
| if [ ! -e "${YUV_RAW_INPUT}" ]; then |
| elog "The file ${YUV_RAW_INPUT##*/} must exist in LIBVPX_TEST_DATA_PATH." |
| return 1 |
| fi |
| if [ "$(vpxenc_can_encode_vp9)" = "yes" ]; then |
| if [ ! -e "${Y4M_NOSQ_PAR_INPUT}" ]; then |
| elog "The file ${Y4M_NOSQ_PAR_INPUT##*/} must exist in" |
| elog "LIBVPX_TEST_DATA_PATH." |
| return 1 |
| fi |
| fi |
| if [ -z "$(vpx_tool_path vpxenc)" ]; then |
| elog "vpxenc not found. It must exist in LIBVPX_BIN_PATH or its parent." |
| return 1 |
| fi |
| } |
| |
| vpxenc_can_encode_vp8() { |
| if [ "$(vp8_encode_available)" = "yes" ]; then |
| echo yes |
| fi |
| } |
| |
| vpxenc_can_encode_vp9() { |
| if [ "$(vp9_encode_available)" = "yes" ]; then |
| echo yes |
| fi |
| } |
| |
| # Echo vpxenc command line parameters allowing use of |
| # hantro_collage_w352h288.yuv as input. |
| yuv_input_hantro_collage() { |
| echo ""${YUV_RAW_INPUT}" |
| --width="${YUV_RAW_INPUT_WIDTH}" |
| --height="${YUV_RAW_INPUT_HEIGHT}"" |
| } |
| |
| y4m_input_non_square_par() { |
| echo ""${Y4M_NOSQ_PAR_INPUT}"" |
| } |
| |
| y4m_input_720p() { |
| echo ""${Y4M_720P_INPUT}"" |
| } |
| |
| # Echo default vpxenc real time encoding params. $1 is the codec, which defaults |
| # to vp8 if unspecified. |
| vpxenc_rt_params() { |
| local codec="${1:-vp8}" |
| echo "--codec=${codec} |
| --buf-initial-sz=500 |
| --buf-optimal-sz=600 |
| --buf-sz=1000 |
| --cpu-used=-6 |
| --end-usage=cbr |
| --error-resilient=1 |
| --kf-max-dist=90000 |
| --lag-in-frames=0 |
| --max-intra-rate=300 |
| --max-q=56 |
| --min-q=2 |
| --noise-sensitivity=0 |
| --overshoot-pct=50 |
| --passes=1 |
| --profile=0 |
| --resize-allowed=0 |
| --rt |
| --static-thresh=0 |
| --undershoot-pct=50" |
| } |
| |
| # Forces --passes to 1 with CONFIG_REALTIME_ONLY. |
| vpxenc_passes_param() { |
| if [ "$(vpx_config_option_enabled CONFIG_REALTIME_ONLY)" = "yes" ]; then |
| echo "--passes=1" |
| else |
| echo "--passes=2" |
| fi |
| } |
| |
| # Wrapper function for running vpxenc with pipe input. Requires that |
| # LIBVPX_BIN_PATH points to the directory containing vpxenc. $1 is used as the |
| # input file path and shifted away. All remaining parameters are passed through |
| # to vpxenc. |
| vpxenc_pipe() { |
| local encoder="$(vpx_tool_path vpxenc)" |
| local input="$1" |
| shift |
| cat "${input}" | eval "${VPX_TEST_PREFIX}" "${encoder}" - \ |
| --test-decode=fatal \ |
| "$@" ${devnull} |
| } |
| |
| # Wrapper function for running vpxenc. Requires that LIBVPX_BIN_PATH points to |
| # the directory containing vpxenc. $1 one is used as the input file path and |
| # shifted away. All remaining parameters are passed through to vpxenc. |
| vpxenc() { |
| local encoder="$(vpx_tool_path vpxenc)" |
| local input="$1" |
| shift |
| eval "${VPX_TEST_PREFIX}" "${encoder}" "${input}" \ |
| --test-decode=fatal \ |
| "$@" ${devnull} |
| } |
| |
| vpxenc_vp8_ivf() { |
| if [ "$(vpxenc_can_encode_vp8)" = "yes" ]; then |
| local output="${VPX_TEST_OUTPUT_DIR}/vp8.ivf" |
| vpxenc $(yuv_input_hantro_collage) \ |
| --codec=vp8 \ |
| --limit="${TEST_FRAMES}" \ |
| --ivf \ |
| --output="${output}" |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| vpxenc_vp8_webm() { |
| if [ "$(vpxenc_can_encode_vp8)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local output="${VPX_TEST_OUTPUT_DIR}/vp8.webm" |
| vpxenc $(yuv_input_hantro_collage) \ |
| --codec=vp8 \ |
| --limit="${TEST_FRAMES}" \ |
| --output="${output}" |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| vpxenc_vp8_webm_rt() { |
| if [ "$(vpxenc_can_encode_vp8)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local output="${VPX_TEST_OUTPUT_DIR}/vp8_rt.webm" |
| vpxenc $(yuv_input_hantro_collage) \ |
| $(vpxenc_rt_params vp8) \ |
| --output="${output}" |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| vpxenc_vp8_webm_2pass() { |
| if [ "$(vpxenc_can_encode_vp8)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local output="${VPX_TEST_OUTPUT_DIR}/vp8.webm" |
| vpxenc $(yuv_input_hantro_collage) \ |
| --codec=vp8 \ |
| --limit="${TEST_FRAMES}" \ |
| --output="${output}" \ |
| --passes=2 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| vpxenc_vp8_webm_lag10_frames20() { |
| if [ "$(vpxenc_can_encode_vp8)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local lag_total_frames=20 |
| local lag_frames=10 |
| local output="${VPX_TEST_OUTPUT_DIR}/vp8_lag10_frames20.webm" |
| vpxenc $(yuv_input_hantro_collage) \ |
| --codec=vp8 \ |
| --limit="${lag_total_frames}" \ |
| --lag-in-frames="${lag_frames}" \ |
| --output="${output}" \ |
| --auto-alt-ref=1 \ |
| --passes=2 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| vpxenc_vp8_ivf_piped_input() { |
| if [ "$(vpxenc_can_encode_vp8)" = "yes" ]; then |
| local output="${VPX_TEST_OUTPUT_DIR}/vp8_piped_input.ivf" |
| vpxenc_pipe $(yuv_input_hantro_collage) \ |
| --codec=vp8 \ |
| --limit="${TEST_FRAMES}" \ |
| --ivf \ |
| --output="${output}" |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| vpxenc_vp9_ivf() { |
| if [ "$(vpxenc_can_encode_vp9)" = "yes" ]; then |
| local output="${VPX_TEST_OUTPUT_DIR}/vp9.ivf" |
| local passes=$(vpxenc_passes_param) |
| vpxenc $(yuv_input_hantro_collage) \ |
| --codec=vp9 \ |
| --limit="${TEST_FRAMES}" \ |
| "${passes}" \ |
| --ivf \ |
| --output="${output}" |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| vpxenc_vp9_webm() { |
| if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local output="${VPX_TEST_OUTPUT_DIR}/vp9.webm" |
| local passes=$(vpxenc_passes_param) |
| vpxenc $(yuv_input_hantro_collage) \ |
| --codec=vp9 \ |
| --limit="${TEST_FRAMES}" \ |
| "${passes}" \ |
| --output="${output}" |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| vpxenc_vp9_webm_rt() { |
| if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local output="${VPX_TEST_OUTPUT_DIR}/vp9_rt.webm" |
| vpxenc $(yuv_input_hantro_collage) \ |
| $(vpxenc_rt_params vp9) \ |
| --output="${output}" |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| vpxenc_vp9_webm_rt_multithread_tiled() { |
| if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local output="${VPX_TEST_OUTPUT_DIR}/vp9_rt_multithread_tiled.webm" |
| local tilethread_min=2 |
| local tilethread_max=4 |
| local num_threads="$(seq ${tilethread_min} ${tilethread_max})" |
| local num_tile_cols="$(seq ${tilethread_min} ${tilethread_max})" |
| |
| for threads in ${num_threads}; do |
| for tile_cols in ${num_tile_cols}; do |
| vpxenc $(y4m_input_720p) \ |
| $(vpxenc_rt_params vp9) \ |
| --threads=${threads} \ |
| --tile-columns=${tile_cols} \ |
| --output="${output}" |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| rm "${output}" |
| done |
| done |
| fi |
| } |
| |
| vpxenc_vp9_webm_rt_multithread_tiled_frameparallel() { |
| if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local output="${VPX_TEST_OUTPUT_DIR}/vp9_rt_mt_t_fp.webm" |
| local tilethread_min=2 |
| local tilethread_max=4 |
| local num_threads="$(seq ${tilethread_min} ${tilethread_max})" |
| local num_tile_cols="$(seq ${tilethread_min} ${tilethread_max})" |
| |
| for threads in ${num_threads}; do |
| for tile_cols in ${num_tile_cols}; do |
| vpxenc $(y4m_input_720p) \ |
| $(vpxenc_rt_params vp9) \ |
| --threads=${threads} \ |
| --tile-columns=${tile_cols} \ |
| --frame-parallel=1 \ |
| --output="${output}" |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| rm "${output}" |
| done |
| done |
| fi |
| } |
| |
| vpxenc_vp9_webm_2pass() { |
| if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local output="${VPX_TEST_OUTPUT_DIR}/vp9.webm" |
| vpxenc $(yuv_input_hantro_collage) \ |
| --codec=vp9 \ |
| --limit="${TEST_FRAMES}" \ |
| --output="${output}" \ |
| --passes=2 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| vpxenc_vp9_ivf_lossless() { |
| if [ "$(vpxenc_can_encode_vp9)" = "yes" ]; then |
| local output="${VPX_TEST_OUTPUT_DIR}/vp9_lossless.ivf" |
| local passes=$(vpxenc_passes_param) |
| vpxenc $(yuv_input_hantro_collage) \ |
| --codec=vp9 \ |
| --limit="${TEST_FRAMES}" \ |
| --ivf \ |
| --output="${output}" \ |
| "${passes}" \ |
| --lossless=1 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| vpxenc_vp9_ivf_minq0_maxq0() { |
| if [ "$(vpxenc_can_encode_vp9)" = "yes" ]; then |
| local output="${VPX_TEST_OUTPUT_DIR}/vp9_lossless_minq0_maxq0.ivf" |
| local passes=$(vpxenc_passes_param) |
| vpxenc $(yuv_input_hantro_collage) \ |
| --codec=vp9 \ |
| --limit="${TEST_FRAMES}" \ |
| --ivf \ |
| --output="${output}" \ |
| "${passes}" \ |
| --min-q=0 \ |
| --max-q=0 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| vpxenc_vp9_webm_lag10_frames20() { |
| if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local lag_total_frames=20 |
| local lag_frames=10 |
| local output="${VPX_TEST_OUTPUT_DIR}/vp9_lag10_frames20.webm" |
| local passes=$(vpxenc_passes_param) |
| vpxenc $(yuv_input_hantro_collage) \ |
| --codec=vp9 \ |
| --limit="${lag_total_frames}" \ |
| --lag-in-frames="${lag_frames}" \ |
| --output="${output}" \ |
| "${passes}" \ |
| --auto-alt-ref=1 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| # TODO(fgalligan): Test that DisplayWidth is different than video width. |
| vpxenc_vp9_webm_non_square_par() { |
| if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local output="${VPX_TEST_OUTPUT_DIR}/vp9_non_square_par.webm" |
| local passes=$(vpxenc_passes_param) |
| vpxenc $(y4m_input_non_square_par) \ |
| --codec=vp9 \ |
| --limit="${TEST_FRAMES}" \ |
| "${passes}" \ |
| --output="${output}" |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| vpxenc_vp9_webm_sharpness() { |
| if [ "$(vpxenc_can_encode_vp9)" = "yes" ]; then |
| local sharpnesses="0 1 2 3 4 5 6 7" |
| local output="${VPX_TEST_OUTPUT_DIR}/vpxenc_vp9_webm_sharpness.ivf" |
| local last_size=0 |
| local this_size=0 |
| |
| for sharpness in ${sharpnesses}; do |
| |
| vpxenc $(yuv_input_hantro_collage) \ |
| --sharpness="${sharpness}" \ |
| --codec=vp9 \ |
| --limit=1 \ |
| --cpu-used=2 \ |
| --end-usage=q \ |
| --cq-level=40 \ |
| --output="${output}" \ |
| "${passes}" |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| |
| this_size=$(stat -c '%s' "${output}") |
| if [ "${this_size}" -lt "${last_size}" ]; then |
| elog "Higher sharpness value yielded lower file size." |
| echo "${this_size}" " < " "${last_size}" |
| return 1 |
| fi |
| last_size="${this_size}" |
| |
| done |
| fi |
| } |
| |
| vpxenc_tests="vpxenc_vp8_ivf |
| vpxenc_vp8_webm |
| vpxenc_vp8_webm_rt |
| vpxenc_vp8_ivf_piped_input |
| vpxenc_vp9_ivf |
| vpxenc_vp9_webm |
| vpxenc_vp9_webm_rt |
| vpxenc_vp9_webm_rt_multithread_tiled |
| vpxenc_vp9_webm_rt_multithread_tiled_frameparallel |
| vpxenc_vp9_ivf_lossless |
| vpxenc_vp9_ivf_minq0_maxq0 |
| vpxenc_vp9_webm_lag10_frames20 |
| vpxenc_vp9_webm_non_square_par |
| vpxenc_vp9_webm_sharpness" |
| |
| if [ "$(vpx_config_option_enabled CONFIG_REALTIME_ONLY)" != "yes" ]; then |
| vpxenc_tests="$vpxenc_tests |
| vpxenc_vp8_webm_2pass |
| vpxenc_vp8_webm_lag10_frames20 |
| vpxenc_vp9_webm_2pass" |
| fi |
| |
| run_tests vpxenc_verify_environment "${vpxenc_tests}" |
