blob: 78fed24c78a7776a05ae6d0c189f5c30a95fc44e [file] [log] [blame]
/* Copyright 2015 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*
* Silicon Image SI1141/SI1142 light sensor driver
*/
/*
* si114x.c - Support for Silabs si114x combined ambient light and
* proximity sensor
*
* Copyright 2012 Peter Meerwald <pmeerw@pmeerw.net>
*
* This file is subject to the terms and conditions of version 2 of
* the GNU General Public License. See the file COPYING in the main
* directory of this archive for more details.
*
* IIO driver for si114x (7-bit I2C slave address 0x5a) with sequencer
* version >= A03
*/
#ifndef __CROS_EC_ALS_SI114X_H
#define __CROS_EC_ALS_SI114X_H
#define SI114X_ADDR (0x5a << 1)
#define SI114X_REG_PART_ID 0x00
#define SI114X_SI1141_ID 0x41
#define SI114X_SI1142_ID 0x42
#define SI114X_SI1143_ID 0x43
#define SI114X_NUM_LEDS (CONFIG_ALS_SI114X - 0x40)
#define SI114X_REG_REV_ID 0x01
#define SI114X_REG_SEQ_ID 0x02
#define SI114X_REG_INT_CFG 0x03
#define SI114X_REG_IRQ_ENABLE 0x04
#define SI114X_REG_IRQ_MODE1 0x05
#define SI114X_REG_IRQ_MODE2 0x06
#define SI114X_REG_HW_KEY 0x07
/* RATE stores a 16 bit value compressed to 8 bit */
/* Not used, the sensor is in force mode */
#define SI114X_REG_MEAS_RATE 0x08
#define SI114X_REG_ALS_RATE 0x09
#define SI114X_REG_PS_RATE 0x0a
#define SI114X_REG_ALS_LOW_TH0 0x0b
#define SI114X_REG_ALS_LOW_TH1 0x0c
#define SI114X_REG_ALS_HI_TH0 0x0d
#define SI114X_REG_ALS_HI_TH1 0x0e
#define SI114X_REG_PS_LED21 0x0f
#define SI114X_REG_PS_LED3 0x10
/*
* for rev A10 and below TH0 stores a 16 bit value compressed to 8 bit and
* TH1 is not used; newer revision have the LSB in TH0 and the MSB in TH1
*/
#define SI114X_REG_PS1_TH0 0x11
#define SI114X_REG_PS1_TH1 0x12
#define SI114X_REG_PS2_TH0 0x13
#define SI114X_REG_PS2_TH1 0x11
#define SI114X_REG_PS3_TH0 0x15
#define SI114X_REG_PS3_TH1 0x16
#define SI114X_REG_PARAM_WR 0x17
#define SI114X_REG_COMMAND 0x18
#define SI114X_REG_RESPONSE 0x20
#define SI114X_REG_IRQ_STATUS 0x21
#define SI114X_REG_ALSVIS_DATA0 0x22
#define SI114X_REG_ALSVIS_DATA1 0x23
#define SI114X_REG_ALSIR_DATA0 0x24
#define SI114X_REG_ALSIR_DATA1 0x25
#define SI114X_REG_PS1_DATA0 0x26
#define SI114X_REG_PS1_DATA1 0x27
#define SI114X_REG_PS2_DATA0 0x28
#define SI114X_REG_PS2_DATA1 0x29
#define SI114X_REG_PS3_DATA0 0x2a
#define SI114X_REG_PS3_DATA1 0x2b
#define SI114X_PS_INVERSION(_data) ((1 << 16) / (_data))
#define SI114X_REG_AUX_DATA0 0x2c
#define SI114X_REG_AUX_DATA1 0x2d
#define SI114X_REG_PARAM_RD 0x2e
#define SI114X_REG_CHIP_STAT 0x30
/* helper to figure out PS_LED register / shift per channel */
#define SI114X_PS_LED_REG(ch) \
(((ch) == 2) ? SI114X_REG_PS_LED3 : SI114X_REG_PS_LED21)
#define SI114X_PS_LED_SHIFT(ch) \
(((ch) == 1) ? 4 : 0)
/* Parameter offsets */
#define SI114X_PARAM_I2C_ADDR 0x00
#define SI114X_PARAM_CHLIST 0x01
#define SI114X_PARAM_PSLED12_SELECT 0x02
#define SI114X_PARAM_PSLED3_SELECT 0x03
#define SI114X_PARAM_FILTER_EN 0x04
#define SI114X_PARAM_PS_ENCODING 0x05
#define SI114X_PARAM_ALS_ENCODING 0x06
#define SI114X_PARAM_PS1_ADC_MUX 0x07
#define SI114X_PARAM_PS2_ADC_MUX 0x08
#define SI114X_PARAM_PS3_ADC_MUX 0x09
#define SI114X_PARAM_PS_ADC_COUNTER 0x0a
#define SI114X_PARAM_PS_ADC_GAIN 0x0b
#define SI114X_PARAM_PS_ADC_MISC 0x0c
#define SI114X_PARAM_PS_ADC_MISC_HIGH_RANGE 0x20
#define SI114X_PARAM_PS_ADC_MISC_NORMAL_MODE 0x04
#define SI114X_PARAM_ALS_ADC_MUX 0x0d
#define SI114X_PARAM_ALSIR_ADC_MUX 0x0e
#define SI114X_PARAM_AUX_ADC_MUX 0x0f
#define SI114X_PARAM_ALSVIS_ADC_COUNTER 0x10
#define SI114X_PARAM_ALSVIS_ADC_GAIN 0x11
#define SI114X_PARAM_ALSVIS_ADC_MISC 0x12
#define SI114X_PARAM_ALS_HYST 0x16
#define SI114X_PARAM_PS_HYST 0x17
#define SI114X_PARAM_PS_HISTORY 0x18
#define SI114X_PARAM_ALS_HISTORY 0x19
#define SI114X_PARAM_ADC_OFFSET 0x1a
#define SI114X_PARAM_SLEEP_CTRL 0x1b
#define SI114X_PARAM_LED_RECOVERY 0x1c
#define SI114X_PARAM_ALSIR_ADC_COUNTER 0x1d
#define SI114X_PARAM_ALSIR_ADC_GAIN 0x1e
#define SI114X_PARAM_ALSIR_ADC_MISC 0x1f
/* Channel enable masks for CHLIST parameter */
#define SI114X_CHLIST_EN_PS1 0x01
#define SI114X_CHLIST_EN_PS2 0x02
#define SI114X_CHLIST_EN_PS3 0x04
#define SI114X_CHLIST_EN_ALSVIS 0x10
#define SI114X_CHLIST_EN_ALSIR 0x20
#define SI114X_CHLIST_EN_AUX 0x40
/* Signal range mask for ADC_MISC parameter */
#define SI114X_MISC_RANGE 0x20
/* Commands for REG_COMMAND */
#define SI114X_CMD_NOP 0x00
#define SI114X_CMD_RESET 0x01
#define SI114X_CMD_BUSADDR 0x02
#define SI114X_CMD_PS_FORCE 0x05
#define SI114X_CMD_ALS_FORCE 0x06
#define SI114X_CMD_PSALS_FORCE 0x07
#define SI114X_CMD_PS_PAUSE 0x09
#define SI114X_CMD_ALS_PAUSE 0x0a
#define SI114X_CMD_PSALS_PAUSE 0x0b
#define SI114X_CMD_PS_AUTO 0x0d
#define SI114X_CMD_ALS_AUTO 0x0e
#define SI114X_CMD_PSALS_AUTO 0x0f
#define SI114X_CMD_PARAM_QUERY 0x80
#define SI114X_CMD_PARAM_SET 0xa0
#define SI114X_CMD_PARAM_AND 0xc0
#define SI114X_CMD_PARAM_OR 0xe0
/* Interrupt configuration masks for INT_CFG register */
#define SI114X_INT_CFG_OE 0x01 /* enable interrupt */
#define SI114X_INT_CFG_MODE 0x02 /* auto reset interrupt pin */
/* Interrupt enable masks for IRQ_ENABLE register */
#define SI114X_CMD_IE 0x20
#define SI114X_PS3_IE 0x10
#define SI114X_PS2_IE 0x08
#define SI114X_PS1_IE 0x04
#define SI114X_ALS_INT1_IE 0x02
#define SI114X_ALS_INT0_IE 0x01
#define SI114X_ALS_INT_FLAG \
(SI114X_ALS_INT1_IE | SI114X_ALS_INT0_IE)
#define SI114X_PS_INT_FLAG \
(SI114X_PS3_IE | SI114X_PS2_IE | SI114X_PS1_IE)
/* Interrupt mode masks for IRQ_MODE1 register */
#define SI114X_PS2_IM_GREATER 0xc0
#define SI114X_PS2_IM_CROSS 0x40
#define SI114X_PS1_IM_GREATER 0x30
#define SI114X_PS1_IM_CROSS 0x10
/* Interrupt mode masks for IRQ_MODE2 register */
#define SI114X_CMD_IM_ERROR 0x04
#define SI114X_PS3_IM_GREATER 0x03
#define SI114X_PS3_IM_CROSS 0x01
/* Measurement rate settings */
#define SI114X_MEAS_RATE_FORCED 0x00
#define SI114X_MEAS_RATE_10MS 0x84
#define SI114X_MEAS_RATE_20MS 0x94
#define SI114X_MEAS_RATE_100MS 0xb9
#define SI114X_MEAS_RATE_496MS 0xdf
#define SI114X_MEAS_RATE_1984MS 0xff
/* ALS rate settings relative to measurement rate */
#define SI114X_ALS_RATE_OFF 0x00
#define SI114X_ALS_RATE_1X 0x08
#define SI114X_ALS_RATE_10X 0x32
#define SI114X_ALS_RATE_100X 0x69
/* PS rate settings relative to measurement rate */
#define SI114X_PS_RATE_OFF 0x00
#define SI114X_PS_RATE_1X 0x08
#define SI114X_PS_RATE_10X 0x32
#define SI114X_PS_RATE_100X 0x69
/* Sequencer revision from SEQ_ID */
#define SI114X_SEQ_REV_A01 0x01
#define SI114X_SEQ_REV_A02 0x02
#define SI114X_SEQ_REV_A03 0x03
#define SI114X_SEQ_REV_A10 0x08
#define SI114X_SEQ_REV_A11 0x09
/* Proximity sensor finds an object within 5 cm, disable light sensor */
#define SI114X_COVERED_THRESHOLD 5
#define SI114X_OVERFLOW 0xffff
/* Time to wait before re-initializing the device if access is denied */
#define SI114X_DENIED_THRESHOLD (10 * SECOND)
/* Delay used for deferred callback when polling is enabled */
#define SI114x_POLLING_DELAY (8 * MSEC)
extern const struct accelgyro_drv si114x_drv;
enum si114x_state {
SI114X_NOT_READY,
SI114X_IDLE,
SI114X_ALS_IN_PROGRESS,
SI114X_ALS_IN_PROGRESS_PS_PENDING,
SI114X_PS_IN_PROGRESS,
SI114X_PS_IN_PROGRESS_ALS_PENDING,
};
/**
* struct si114x_data - si114x chip state data
* @client: I2C client
**/
struct si114x_typed_data_t {
uint8_t base_data_reg;
uint8_t irq_flags;
/* requested frequency, in mHz */
int rate;
/* the coef is scale.uscale */
int16_t scale;
uint16_t uscale;
int16_t offset;
};
struct si114x_drv_data_t {
enum si114x_state state;
uint8_t covered;
struct si114x_typed_data_t type_data[2];
};
#define SI114X_GET_DATA(_s) \
((struct si114x_drv_data_t *)(_s)->drv_data)
#define SI114X_GET_TYPED_DATA(_s) \
(&SI114X_GET_DATA(_s)->type_data[(_s)->type - MOTIONSENSE_TYPE_PROX])
extern struct si114x_drv_data_t g_si114x_data;
void si114x_interrupt(enum gpio_signal signal);
#endif /* __CROS_EC_ALS_SI114X_H */