| # This file is part of the coreboot project. |
| # |
| # Copyright (C) 2017 Hal Martin <hal.martin@gmail.com> |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; version 2 of the License. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| |
| chip northbridge/intel/sandybridge # FIXME: check gfx.ndid and gfx.did |
| register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" |
| register "gfx.link_frequency_270_mhz" = "1" |
| register "gfx.ndid" = "3" |
| register "gfx.use_spread_spectrum_clock" = "0" |
| register "gpu_cpu_backlight" = "0x00000000" |
| register "gpu_dp_b_hotplug" = "4" |
| register "gpu_dp_c_hotplug" = "4" |
| register "gpu_dp_d_hotplug" = "4" |
| register "gpu_panel_port_select" = "0" |
| register "gpu_panel_power_backlight_off_delay" = "0" |
| register "gpu_panel_power_backlight_on_delay" = "0" |
| register "gpu_panel_power_cycle_delay" = "4" |
| register "gpu_panel_power_down_delay" = "0" |
| register "gpu_panel_power_up_delay" = "0" |
| register "gpu_pch_backlight" = "0x00000000" |
| device cpu_cluster 0x0 on |
| chip cpu/intel/socket_FCBGA1023 |
| device lapic 0x0 on end |
| end |
| chip cpu/intel/model_206ax # FIXME: check all registers |
| register "c1_acpower" = "1" |
| register "c1_battery" = "1" |
| register "c2_acpower" = "3" |
| register "c2_battery" = "3" |
| register "c3_acpower" = "5" |
| register "c3_battery" = "5" |
| device lapic 0xacac off end |
| end |
| end |
| device domain 0x0 on |
| chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH |
| register "c2_latency" = "0x0065" |
| register "docking_supported" = "1" |
| register "gen1_dec" = "0x0000164d" |
| register "gen2_dec" = "0x000c0681" |
| register "gen3_dec" = "0x000406f1" |
| register "gen4_dec" = "0x000c06a1" |
| register "gpi7_routing" = "2" |
| register "p_cnt_throttling_supported" = "1" |
| register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" |
| register "pcie_port_coalesce" = "1" |
| register "sata_interface_speed_support" = "0x3" |
| # Intense PC SATA portmap: |
| # Port 0: internal 2.5" bay |
| # Port 1: optional FACE module |
| # Port 2: rear eSATA |
| # Port 3: rear eSATA |
| # Port 4: mSATA |
| # Port 5: optional FACE module |
| # enable ALL ports (FACE module REQUIRED for ports 1&5) |
| register "sata_port_map" = "0x3f" |
| # enable ONLY ports present on stock MintBox/Intense PC |
| #register "sata_port_map" = "0x1d" |
| register "superspeed_capable_ports" = "0x0000000f" |
| register "xhci_overcurrent_mapping" = "0x00000c03" |
| register "xhci_switchable_ports" = "0x0000000f" |
| register "spi_uvscc" = "0x2005" |
| register "spi_lvscc" = "0x2005" |
| |
| # USB 3.0 Controller |
| device pci 14.0 on |
| subsystemid 0x8086 0x7270 |
| end |
| |
| # Management Engine Interface 1 |
| device pci 16.0 off |
| end |
| |
| # Management Engine Interface 2 |
| device pci 16.1 off |
| end |
| |
| # Management Engine IDE-R |
| device pci 16.2 off |
| end |
| |
| # Management Engine KT |
| device pci 16.3 off |
| end |
| |
| # Intel Gigabit Ethernet |
| device pci 19.0 on |
| end |
| |
| # USB2 EHCI #2 |
| device pci 1a.0 on |
| subsystemid 0x8086 0x7270 |
| end |
| |
| # High Definition Audio Audio controller |
| device pci 1b.0 on |
| subsystemid 0x8086 0x7270 |
| end |
| |
| # PCIe Port #1 |
| device pci 1c.0 on |
| subsystemid 0x8086 0x7270 |
| end |
| |
| # PCIe Port #2 |
| device pci 1c.1 on |
| subsystemid 0x8086 0x7270 |
| end |
| |
| # PCIe Port #3 |
| device pci 1c.2 on |
| subsystemid 0x8086 0x7270 |
| end |
| |
| # PCIe Port #4 |
| device pci 1c.3 off |
| end |
| |
| # PCIe Port #5 |
| device pci 1c.4 on |
| subsystemid 0x8086 0x7270 |
| end |
| |
| # PCIe Port #6 |
| device pci 1c.5 off |
| end |
| |
| # PCIe Port #7 |
| device pci 1c.6 off |
| end |
| |
| # PCIe Port #8 |
| device pci 1c.7 off |
| end |
| |
| # USB2 EHCI #1 |
| device pci 1d.0 on |
| subsystemid 0x8086 0x7270 |
| end |
| |
| # PCI bridge |
| device pci 1e.0 off |
| end |
| |
| # LPC bridge PCI-LPC bridge |
| device pci 1f.0 on |
| subsystemid 0x8086 0x7270 |
| end |
| |
| # SATA Controller 1 |
| device pci 1f.2 on |
| subsystemid 0x8086 0x7270 |
| end |
| |
| # SMBus |
| device pci 1f.3 on |
| subsystemid 0x8086 0x7270 |
| end |
| |
| # SATA Controller 2 |
| device pci 1f.5 off |
| end |
| |
| # Thermal Unsupported PCI device 8086:1e24 |
| device pci 1f.6 on |
| subsystemid 0x8086 0x7270 |
| end |
| end |
| |
| # Host bridge Host bridge |
| device pci 00.0 on |
| subsystemid 0x8086 0x2010 |
| end |
| |
| # PCIe Bridge for discrete graphics PCI device 8086:0151 |
| device pci 01.0 on |
| subsystemid 0x8086 0x2010 |
| end |
| |
| # Internal graphics VGA controller |
| device pci 02.0 on |
| subsystemid 0x8086 0x2211 |
| end |
| |
| # Unsupported PCI device 8086:0155 |
| device pci 01.1 on |
| subsystemid 0x8086 0x2010 |
| end |
| end |
| end |