| /* Target Code for R8C/M16C/M32C |
| Copyright (C) 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
| Free Software Foundation, Inc. |
| Contributed by Red Hat. |
| |
| This file is part of GCC. |
| |
| GCC is free software; you can redistribute it and/or modify it |
| under the terms of the GNU General Public License as published |
| by the Free Software Foundation; either version 3, or (at your |
| option) any later version. |
| |
| GCC is distributed in the hope that it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public |
| License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GCC; see the file COPYING3. If not see |
| <http://www.gnu.org/licenses/>. */ |
| |
| #include "config.h" |
| #include "system.h" |
| #include "coretypes.h" |
| #include "tm.h" |
| #include "rtl.h" |
| #include "regs.h" |
| #include "hard-reg-set.h" |
| #include "insn-config.h" |
| #include "conditions.h" |
| #include "insn-flags.h" |
| #include "output.h" |
| #include "insn-attr.h" |
| #include "flags.h" |
| #include "recog.h" |
| #include "reload.h" |
| #include "diagnostic-core.h" |
| #include "obstack.h" |
| #include "tree.h" |
| #include "expr.h" |
| #include "optabs.h" |
| #include "except.h" |
| #include "function.h" |
| #include "ggc.h" |
| #include "target.h" |
| #include "target-def.h" |
| #include "tm_p.h" |
| #include "langhooks.h" |
| #include "gimple.h" |
| #include "df.h" |
| |
| /* Prototypes */ |
| |
| /* Used by m32c_pushm_popm. */ |
| typedef enum |
| { |
| PP_pushm, |
| PP_popm, |
| PP_justcount |
| } Push_Pop_Type; |
| |
| static bool m32c_function_needs_enter (void); |
| static tree interrupt_handler (tree *, tree, tree, int, bool *); |
| static tree function_vector_handler (tree *, tree, tree, int, bool *); |
| static int interrupt_p (tree node); |
| static int bank_switch_p (tree node); |
| static int fast_interrupt_p (tree node); |
| static int interrupt_p (tree node); |
| static bool m32c_asm_integer (rtx, unsigned int, int); |
| static int m32c_comp_type_attributes (const_tree, const_tree); |
| static bool m32c_fixed_condition_code_regs (unsigned int *, unsigned int *); |
| static struct machine_function *m32c_init_machine_status (void); |
| static void m32c_insert_attributes (tree, tree *); |
| static bool m32c_legitimate_address_p (enum machine_mode, rtx, bool); |
| static bool m32c_addr_space_legitimate_address_p (enum machine_mode, rtx, bool, addr_space_t); |
| static rtx m32c_function_arg (cumulative_args_t, enum machine_mode, |
| const_tree, bool); |
| static bool m32c_pass_by_reference (cumulative_args_t, enum machine_mode, |
| const_tree, bool); |
| static void m32c_function_arg_advance (cumulative_args_t, enum machine_mode, |
| const_tree, bool); |
| static unsigned int m32c_function_arg_boundary (enum machine_mode, const_tree); |
| static int m32c_pushm_popm (Push_Pop_Type); |
| static bool m32c_strict_argument_naming (cumulative_args_t); |
| static rtx m32c_struct_value_rtx (tree, int); |
| static rtx m32c_subreg (enum machine_mode, rtx, enum machine_mode, int); |
| static int need_to_save (int); |
| static rtx m32c_function_value (const_tree, const_tree, bool); |
| static rtx m32c_libcall_value (enum machine_mode, const_rtx); |
| |
| /* Returns true if an address is specified, else false. */ |
| static bool m32c_get_pragma_address (const char *varname, unsigned *addr); |
| |
| #define SYMBOL_FLAG_FUNCVEC_FUNCTION (SYMBOL_FLAG_MACH_DEP << 0) |
| |
| #define streq(a,b) (strcmp ((a), (b)) == 0) |
| |
| /* Internal support routines */ |
| |
| /* Debugging statements are tagged with DEBUG0 only so that they can |
| be easily enabled individually, by replacing the '0' with '1' as |
| needed. */ |
| #define DEBUG0 0 |
| #define DEBUG1 1 |
| |
| #if DEBUG0 |
| /* This is needed by some of the commented-out debug statements |
| below. */ |
| static char const *class_names[LIM_REG_CLASSES] = REG_CLASS_NAMES; |
| #endif |
| static int class_contents[LIM_REG_CLASSES][1] = REG_CLASS_CONTENTS; |
| |
| /* These are all to support encode_pattern(). */ |
| static char pattern[30], *patternp; |
| static GTY(()) rtx patternr[30]; |
| #define RTX_IS(x) (streq (pattern, x)) |
| |
| /* Some macros to simplify the logic throughout this file. */ |
| #define IS_MEM_REGNO(regno) ((regno) >= MEM0_REGNO && (regno) <= MEM7_REGNO) |
| #define IS_MEM_REG(rtx) (GET_CODE (rtx) == REG && IS_MEM_REGNO (REGNO (rtx))) |
| |
| #define IS_CR_REGNO(regno) ((regno) >= SB_REGNO && (regno) <= PC_REGNO) |
| #define IS_CR_REG(rtx) (GET_CODE (rtx) == REG && IS_CR_REGNO (REGNO (rtx))) |
| |
| static int |
| far_addr_space_p (rtx x) |
| { |
| if (GET_CODE (x) != MEM) |
| return 0; |
| #if DEBUG0 |
| fprintf(stderr, "\033[35mfar_addr_space: "); debug_rtx(x); |
| fprintf(stderr, " = %d\033[0m\n", MEM_ADDR_SPACE (x) == ADDR_SPACE_FAR); |
| #endif |
| return MEM_ADDR_SPACE (x) == ADDR_SPACE_FAR; |
| } |
| |
| /* We do most RTX matching by converting the RTX into a string, and |
| using string compares. This vastly simplifies the logic in many of |
| the functions in this file. |
| |
| On exit, pattern[] has the encoded string (use RTX_IS("...") to |
| compare it) and patternr[] has pointers to the nodes in the RTX |
| corresponding to each character in the encoded string. The latter |
| is mostly used by print_operand(). |
| |
| Unrecognized patterns have '?' in them; this shows up when the |
| assembler complains about syntax errors. |
| */ |
| |
| static void |
| encode_pattern_1 (rtx x) |
| { |
| int i; |
| |
| if (patternp == pattern + sizeof (pattern) - 2) |
| { |
| patternp[-1] = '?'; |
| return; |
| } |
| |
| patternr[patternp - pattern] = x; |
| |
| switch (GET_CODE (x)) |
| { |
| case REG: |
| *patternp++ = 'r'; |
| break; |
| case SUBREG: |
| if (GET_MODE_SIZE (GET_MODE (x)) != |
| GET_MODE_SIZE (GET_MODE (XEXP (x, 0)))) |
| *patternp++ = 'S'; |
| encode_pattern_1 (XEXP (x, 0)); |
| break; |
| case MEM: |
| *patternp++ = 'm'; |
| case CONST: |
| encode_pattern_1 (XEXP (x, 0)); |
| break; |
| case SIGN_EXTEND: |
| *patternp++ = '^'; |
| *patternp++ = 'S'; |
| encode_pattern_1 (XEXP (x, 0)); |
| break; |
| case ZERO_EXTEND: |
| *patternp++ = '^'; |
| *patternp++ = 'Z'; |
| encode_pattern_1 (XEXP (x, 0)); |
| break; |
| case PLUS: |
| *patternp++ = '+'; |
| encode_pattern_1 (XEXP (x, 0)); |
| encode_pattern_1 (XEXP (x, 1)); |
| break; |
| case PRE_DEC: |
| *patternp++ = '>'; |
| encode_pattern_1 (XEXP (x, 0)); |
| break; |
| case POST_INC: |
| *patternp++ = '<'; |
| encode_pattern_1 (XEXP (x, 0)); |
| break; |
| case LO_SUM: |
| *patternp++ = 'L'; |
| encode_pattern_1 (XEXP (x, 0)); |
| encode_pattern_1 (XEXP (x, 1)); |
| break; |
| case HIGH: |
| *patternp++ = 'H'; |
| encode_pattern_1 (XEXP (x, 0)); |
| break; |
| case SYMBOL_REF: |
| *patternp++ = 's'; |
| break; |
| case LABEL_REF: |
| *patternp++ = 'l'; |
| break; |
| case CODE_LABEL: |
| *patternp++ = 'c'; |
| break; |
| case CONST_INT: |
| case CONST_DOUBLE: |
| *patternp++ = 'i'; |
| break; |
| case UNSPEC: |
| *patternp++ = 'u'; |
| *patternp++ = '0' + XCINT (x, 1, UNSPEC); |
| for (i = 0; i < XVECLEN (x, 0); i++) |
| encode_pattern_1 (XVECEXP (x, 0, i)); |
| break; |
| case USE: |
| *patternp++ = 'U'; |
| break; |
| case PARALLEL: |
| *patternp++ = '|'; |
| for (i = 0; i < XVECLEN (x, 0); i++) |
| encode_pattern_1 (XVECEXP (x, 0, i)); |
| break; |
| case EXPR_LIST: |
| *patternp++ = 'E'; |
| encode_pattern_1 (XEXP (x, 0)); |
| if (XEXP (x, 1)) |
| encode_pattern_1 (XEXP (x, 1)); |
| break; |
| default: |
| *patternp++ = '?'; |
| #if DEBUG0 |
| fprintf (stderr, "can't encode pattern %s\n", |
| GET_RTX_NAME (GET_CODE (x))); |
| debug_rtx (x); |
| gcc_unreachable (); |
| #endif |
| break; |
| } |
| } |
| |
| static void |
| encode_pattern (rtx x) |
| { |
| patternp = pattern; |
| encode_pattern_1 (x); |
| *patternp = 0; |
| } |
| |
| /* Since register names indicate the mode they're used in, we need a |
| way to determine which name to refer to the register with. Called |
| by print_operand(). */ |
| |
| static const char * |
| reg_name_with_mode (int regno, enum machine_mode mode) |
| { |
| int mlen = GET_MODE_SIZE (mode); |
| if (regno == R0_REGNO && mlen == 1) |
| return "r0l"; |
| if (regno == R0_REGNO && (mlen == 3 || mlen == 4)) |
| return "r2r0"; |
| if (regno == R0_REGNO && mlen == 6) |
| return "r2r1r0"; |
| if (regno == R0_REGNO && mlen == 8) |
| return "r3r1r2r0"; |
| if (regno == R1_REGNO && mlen == 1) |
| return "r1l"; |
| if (regno == R1_REGNO && (mlen == 3 || mlen == 4)) |
| return "r3r1"; |
| if (regno == A0_REGNO && TARGET_A16 && (mlen == 3 || mlen == 4)) |
| return "a1a0"; |
| return reg_names[regno]; |
| } |
| |
| /* How many bytes a register uses on stack when it's pushed. We need |
| to know this because the push opcode needs to explicitly indicate |
| the size of the register, even though the name of the register |
| already tells it that. Used by m32c_output_reg_{push,pop}, which |
| is only used through calls to ASM_OUTPUT_REG_{PUSH,POP}. */ |
| |
| static int |
| reg_push_size (int regno) |
| { |
| switch (regno) |
| { |
| case R0_REGNO: |
| case R1_REGNO: |
| return 2; |
| case R2_REGNO: |
| case R3_REGNO: |
| case FLG_REGNO: |
| return 2; |
| case A0_REGNO: |
| case A1_REGNO: |
| case SB_REGNO: |
| case FB_REGNO: |
| case SP_REGNO: |
| if (TARGET_A16) |
| return 2; |
| else |
| return 3; |
| default: |
| gcc_unreachable (); |
| } |
| } |
| |
| /* Given two register classes, find the largest intersection between |
| them. If there is no intersection, return RETURNED_IF_EMPTY |
| instead. */ |
| static reg_class_t |
| reduce_class (reg_class_t original_class, reg_class_t limiting_class, |
| reg_class_t returned_if_empty) |
| { |
| HARD_REG_SET cc; |
| int i; |
| reg_class_t best = NO_REGS; |
| unsigned int best_size = 0; |
| |
| if (original_class == limiting_class) |
| return original_class; |
| |
| cc = reg_class_contents[original_class]; |
| AND_HARD_REG_SET (cc, reg_class_contents[limiting_class]); |
| |
| for (i = 0; i < LIM_REG_CLASSES; i++) |
| { |
| if (hard_reg_set_subset_p (reg_class_contents[i], cc)) |
| if (best_size < reg_class_size[i]) |
| { |
| best = (reg_class_t) i; |
| best_size = reg_class_size[i]; |
| } |
| |
| } |
| if (best == NO_REGS) |
| return returned_if_empty; |
| return best; |
| } |
| |
| /* Used by m32c_register_move_cost to determine if a move is |
| impossibly expensive. */ |
| static bool |
| class_can_hold_mode (reg_class_t rclass, enum machine_mode mode) |
| { |
| /* Cache the results: 0=untested 1=no 2=yes */ |
| static char results[LIM_REG_CLASSES][MAX_MACHINE_MODE]; |
| |
| if (results[(int) rclass][mode] == 0) |
| { |
| int r; |
| results[rclass][mode] = 1; |
| for (r = 0; r < FIRST_PSEUDO_REGISTER; r++) |
| if (in_hard_reg_set_p (reg_class_contents[(int) rclass], mode, r) |
| && HARD_REGNO_MODE_OK (r, mode)) |
| { |
| results[rclass][mode] = 2; |
| break; |
| } |
| } |
| |
| #if DEBUG0 |
| fprintf (stderr, "class %s can hold %s? %s\n", |
| class_names[(int) rclass], mode_name[mode], |
| (results[rclass][mode] == 2) ? "yes" : "no"); |
| #endif |
| return results[(int) rclass][mode] == 2; |
| } |
| |
| /* Run-time Target Specification. */ |
| |
| /* Memregs are memory locations that gcc treats like general |
| registers, as there are a limited number of true registers and the |
| m32c families can use memory in most places that registers can be |
| used. |
| |
| However, since memory accesses are more expensive than registers, |
| we allow the user to limit the number of memregs available, in |
| order to try to persuade gcc to try harder to use real registers. |
| |
| Memregs are provided by lib1funcs.S. |
| */ |
| |
| int ok_to_change_target_memregs = TRUE; |
| |
| /* Implements TARGET_OPTION_OVERRIDE. */ |
| |
| #undef TARGET_OPTION_OVERRIDE |
| #define TARGET_OPTION_OVERRIDE m32c_option_override |
| |
| static void |
| m32c_option_override (void) |
| { |
| /* We limit memregs to 0..16, and provide a default. */ |
| if (global_options_set.x_target_memregs) |
| { |
| if (target_memregs < 0 || target_memregs > 16) |
| error ("invalid target memregs value '%d'", target_memregs); |
| } |
| else |
| target_memregs = 16; |
| |
| if (TARGET_A24) |
| flag_ivopts = 0; |
| |
| /* This target defaults to strict volatile bitfields. */ |
| if (flag_strict_volatile_bitfields < 0 && abi_version_at_least(2)) |
| flag_strict_volatile_bitfields = 1; |
| |
| /* r8c/m16c have no 16-bit indirect call, so thunks are involved. |
| This is always worse than an absolute call. */ |
| if (TARGET_A16) |
| flag_no_function_cse = 1; |
| |
| /* This wants to put insns between compares and their jumps. */ |
| /* FIXME: The right solution is to properly trace the flags register |
| values, but that is too much work for stage 4. */ |
| flag_combine_stack_adjustments = 0; |
| } |
| |
| #undef TARGET_OVERRIDE_OPTIONS_AFTER_CHANGE |
| #define TARGET_OVERRIDE_OPTIONS_AFTER_CHANGE m32c_override_options_after_change |
| |
| static void |
| m32c_override_options_after_change (void) |
| { |
| if (TARGET_A16) |
| flag_no_function_cse = 1; |
| } |
| |
| /* Defining data structures for per-function information */ |
| |
| /* The usual; we set up our machine_function data. */ |
| static struct machine_function * |
| m32c_init_machine_status (void) |
| { |
| return ggc_alloc_cleared_machine_function (); |
| } |
| |
| /* Implements INIT_EXPANDERS. We just set up to call the above |
| function. */ |
| void |
| m32c_init_expanders (void) |
| { |
| init_machine_status = m32c_init_machine_status; |
| } |
| |
| /* Storage Layout */ |
| |
| /* Register Basics */ |
| |
| /* Basic Characteristics of Registers */ |
| |
| /* Whether a mode fits in a register is complex enough to warrant a |
| table. */ |
| static struct |
| { |
| char qi_regs; |
| char hi_regs; |
| char pi_regs; |
| char si_regs; |
| char di_regs; |
| } nregs_table[FIRST_PSEUDO_REGISTER] = |
| { |
| { 1, 1, 2, 2, 4 }, /* r0 */ |
| { 0, 1, 0, 0, 0 }, /* r2 */ |
| { 1, 1, 2, 2, 0 }, /* r1 */ |
| { 0, 1, 0, 0, 0 }, /* r3 */ |
| { 0, 1, 1, 0, 0 }, /* a0 */ |
| { 0, 1, 1, 0, 0 }, /* a1 */ |
| { 0, 1, 1, 0, 0 }, /* sb */ |
| { 0, 1, 1, 0, 0 }, /* fb */ |
| { 0, 1, 1, 0, 0 }, /* sp */ |
| { 1, 1, 1, 0, 0 }, /* pc */ |
| { 0, 0, 0, 0, 0 }, /* fl */ |
| { 1, 1, 1, 0, 0 }, /* ap */ |
| { 1, 1, 2, 2, 4 }, /* mem0 */ |
| { 1, 1, 2, 2, 4 }, /* mem1 */ |
| { 1, 1, 2, 2, 4 }, /* mem2 */ |
| { 1, 1, 2, 2, 4 }, /* mem3 */ |
| { 1, 1, 2, 2, 4 }, /* mem4 */ |
| { 1, 1, 2, 2, 0 }, /* mem5 */ |
| { 1, 1, 2, 2, 0 }, /* mem6 */ |
| { 1, 1, 0, 0, 0 }, /* mem7 */ |
| }; |
| |
| /* Implements TARGET_CONDITIONAL_REGISTER_USAGE. We adjust the number |
| of available memregs, and select which registers need to be preserved |
| across calls based on the chip family. */ |
| |
| #undef TARGET_CONDITIONAL_REGISTER_USAGE |
| #define TARGET_CONDITIONAL_REGISTER_USAGE m32c_conditional_register_usage |
| void |
| m32c_conditional_register_usage (void) |
| { |
| int i; |
| |
| if (0 <= target_memregs && target_memregs <= 16) |
| { |
| /* The command line option is bytes, but our "registers" are |
| 16-bit words. */ |
| for (i = (target_memregs+1)/2; i < 8; i++) |
| { |
| fixed_regs[MEM0_REGNO + i] = 1; |
| CLEAR_HARD_REG_BIT (reg_class_contents[MEM_REGS], MEM0_REGNO + i); |
| } |
| } |
| |
| /* M32CM and M32C preserve more registers across function calls. */ |
| if (TARGET_A24) |
| { |
| call_used_regs[R1_REGNO] = 0; |
| call_used_regs[R2_REGNO] = 0; |
| call_used_regs[R3_REGNO] = 0; |
| call_used_regs[A0_REGNO] = 0; |
| call_used_regs[A1_REGNO] = 0; |
| } |
| } |
| |
| /* How Values Fit in Registers */ |
| |
| /* Implements HARD_REGNO_NREGS. This is complicated by the fact that |
| different registers are different sizes from each other, *and* may |
| be different sizes in different chip families. */ |
| static int |
| m32c_hard_regno_nregs_1 (int regno, enum machine_mode mode) |
| { |
| if (regno == FLG_REGNO && mode == CCmode) |
| return 1; |
| if (regno >= FIRST_PSEUDO_REGISTER) |
| return ((GET_MODE_SIZE (mode) + UNITS_PER_WORD - 1) / UNITS_PER_WORD); |
| |
| if (regno >= MEM0_REGNO && regno <= MEM7_REGNO) |
| return (GET_MODE_SIZE (mode) + 1) / 2; |
| |
| if (GET_MODE_SIZE (mode) <= 1) |
| return nregs_table[regno].qi_regs; |
| if (GET_MODE_SIZE (mode) <= 2) |
| return nregs_table[regno].hi_regs; |
| if (regno == A0_REGNO && mode == SImode && TARGET_A16) |
| return 2; |
| if ((GET_MODE_SIZE (mode) <= 3 || mode == PSImode) && TARGET_A24) |
| return nregs_table[regno].pi_regs; |
| if (GET_MODE_SIZE (mode) <= 4) |
| return nregs_table[regno].si_regs; |
| if (GET_MODE_SIZE (mode) <= 8) |
| return nregs_table[regno].di_regs; |
| return 0; |
| } |
| |
| int |
| m32c_hard_regno_nregs (int regno, enum machine_mode mode) |
| { |
| int rv = m32c_hard_regno_nregs_1 (regno, mode); |
| return rv ? rv : 1; |
| } |
| |
| /* Implements HARD_REGNO_MODE_OK. The above function does the work |
| already; just test its return value. */ |
| int |
| m32c_hard_regno_ok (int regno, enum machine_mode mode) |
| { |
| return m32c_hard_regno_nregs_1 (regno, mode) != 0; |
| } |
| |
| /* Implements MODES_TIEABLE_P. In general, modes aren't tieable since |
| registers are all different sizes. However, since most modes are |
| bigger than our registers anyway, it's easier to implement this |
| function that way, leaving QImode as the only unique case. */ |
| int |
| m32c_modes_tieable_p (enum machine_mode m1, enum machine_mode m2) |
| { |
| if (GET_MODE_SIZE (m1) == GET_MODE_SIZE (m2)) |
| return 1; |
| |
| #if 0 |
| if (m1 == QImode || m2 == QImode) |
| return 0; |
| #endif |
| |
| return 1; |
| } |
| |
| /* Register Classes */ |
| |
| /* Implements REGNO_REG_CLASS. */ |
| enum reg_class |
| m32c_regno_reg_class (int regno) |
| { |
| switch (regno) |
| { |
| case R0_REGNO: |
| return R0_REGS; |
| case R1_REGNO: |
| return R1_REGS; |
| case R2_REGNO: |
| return R2_REGS; |
| case R3_REGNO: |
| return R3_REGS; |
| case A0_REGNO: |
| return A0_REGS; |
| case A1_REGNO: |
| return A1_REGS; |
| case SB_REGNO: |
| return SB_REGS; |
| case FB_REGNO: |
| return FB_REGS; |
| case SP_REGNO: |
| return SP_REGS; |
| case FLG_REGNO: |
| return FLG_REGS; |
| default: |
| if (IS_MEM_REGNO (regno)) |
| return MEM_REGS; |
| return ALL_REGS; |
| } |
| } |
| |
| /* Implements REG_CLASS_FROM_CONSTRAINT. Note that some constraints only match |
| for certain chip families. */ |
| int |
| m32c_reg_class_from_constraint (char c ATTRIBUTE_UNUSED, const char *s) |
| { |
| if (memcmp (s, "Rsp", 3) == 0) |
| return SP_REGS; |
| if (memcmp (s, "Rfb", 3) == 0) |
| return FB_REGS; |
| if (memcmp (s, "Rsb", 3) == 0) |
| return SB_REGS; |
| if (memcmp (s, "Rcr", 3) == 0) |
| return TARGET_A16 ? CR_REGS : NO_REGS; |
| if (memcmp (s, "Rcl", 3) == 0) |
| return TARGET_A24 ? CR_REGS : NO_REGS; |
| if (memcmp (s, "R0w", 3) == 0) |
| return R0_REGS; |
| if (memcmp (s, "R1w", 3) == 0) |
| return R1_REGS; |
| if (memcmp (s, "R2w", 3) == 0) |
| return R2_REGS; |
| if (memcmp (s, "R3w", 3) == 0) |
| return R3_REGS; |
| if (memcmp (s, "R02", 3) == 0) |
| return R02_REGS; |
| if (memcmp (s, "R13", 3) == 0) |
| return R13_REGS; |
| if (memcmp (s, "R03", 3) == 0) |
| return R03_REGS; |
| if (memcmp (s, "Rdi", 3) == 0) |
| return DI_REGS; |
| if (memcmp (s, "Rhl", 3) == 0) |
| return HL_REGS; |
| if (memcmp (s, "R23", 3) == 0) |
| return R23_REGS; |
| if (memcmp (s, "Ra0", 3) == 0) |
| return A0_REGS; |
| if (memcmp (s, "Ra1", 3) == 0) |
| return A1_REGS; |
| if (memcmp (s, "Raa", 3) == 0) |
| return A_REGS; |
| if (memcmp (s, "Raw", 3) == 0) |
| return TARGET_A16 ? A_REGS : NO_REGS; |
| if (memcmp (s, "Ral", 3) == 0) |
| return TARGET_A24 ? A_REGS : NO_REGS; |
| if (memcmp (s, "Rqi", 3) == 0) |
| return QI_REGS; |
| if (memcmp (s, "Rad", 3) == 0) |
| return AD_REGS; |
| if (memcmp (s, "Rsi", 3) == 0) |
| return SI_REGS; |
| if (memcmp (s, "Rhi", 3) == 0) |
| return HI_REGS; |
| if (memcmp (s, "Rhc", 3) == 0) |
| return HC_REGS; |
| if (memcmp (s, "Rra", 3) == 0) |
| return RA_REGS; |
| if (memcmp (s, "Rfl", 3) == 0) |
| return FLG_REGS; |
| if (memcmp (s, "Rmm", 3) == 0) |
| { |
| if (fixed_regs[MEM0_REGNO]) |
| return NO_REGS; |
| return MEM_REGS; |
| } |
| |
| /* PSImode registers - i.e. whatever can hold a pointer. */ |
| if (memcmp (s, "Rpi", 3) == 0) |
| { |
| if (TARGET_A16) |
| return HI_REGS; |
| else |
| return RA_REGS; /* r2r0 and r3r1 can hold pointers. */ |
| } |
| |
| /* We handle this one as an EXTRA_CONSTRAINT. */ |
| if (memcmp (s, "Rpa", 3) == 0) |
| return NO_REGS; |
| |
| if (*s == 'R') |
| { |
| fprintf(stderr, "unrecognized R constraint: %.3s\n", s); |
| gcc_unreachable(); |
| } |
| |
| return NO_REGS; |
| } |
| |
| /* Implements REGNO_OK_FOR_BASE_P. */ |
| int |
| m32c_regno_ok_for_base_p (int regno) |
| { |
| if (regno == A0_REGNO |
| || regno == A1_REGNO || regno >= FIRST_PSEUDO_REGISTER) |
| return 1; |
| return 0; |
| } |
| |
| #define DEBUG_RELOAD 0 |
| |
| /* Implements TARGET_PREFERRED_RELOAD_CLASS. In general, prefer general |
| registers of the appropriate size. */ |
| |
| #undef TARGET_PREFERRED_RELOAD_CLASS |
| #define TARGET_PREFERRED_RELOAD_CLASS m32c_preferred_reload_class |
| |
| static reg_class_t |
| m32c_preferred_reload_class (rtx x, reg_class_t rclass) |
| { |
| reg_class_t newclass = rclass; |
| |
| #if DEBUG_RELOAD |
| fprintf (stderr, "\npreferred_reload_class for %s is ", |
| class_names[rclass]); |
| #endif |
| if (rclass == NO_REGS) |
| rclass = GET_MODE (x) == QImode ? HL_REGS : R03_REGS; |
| |
| if (reg_classes_intersect_p (rclass, CR_REGS)) |
| { |
| switch (GET_MODE (x)) |
| { |
| case QImode: |
| newclass = HL_REGS; |
| break; |
| default: |
| /* newclass = HI_REGS; */ |
| break; |
| } |
| } |
| |
| else if (newclass == QI_REGS && GET_MODE_SIZE (GET_MODE (x)) > 2) |
| newclass = SI_REGS; |
| else if (GET_MODE_SIZE (GET_MODE (x)) > 4 |
| && ! reg_class_subset_p (R03_REGS, rclass)) |
| newclass = DI_REGS; |
| |
| rclass = reduce_class (rclass, newclass, rclass); |
| |
| if (GET_MODE (x) == QImode) |
| rclass = reduce_class (rclass, HL_REGS, rclass); |
| |
| #if DEBUG_RELOAD |
| fprintf (stderr, "%s\n", class_names[rclass]); |
| debug_rtx (x); |
| |
| if (GET_CODE (x) == MEM |
| && GET_CODE (XEXP (x, 0)) == PLUS |
| && GET_CODE (XEXP (XEXP (x, 0), 0)) == PLUS) |
| fprintf (stderr, "Glorm!\n"); |
| #endif |
| return rclass; |
| } |
| |
| /* Implements TARGET_PREFERRED_OUTPUT_RELOAD_CLASS. */ |
| |
| #undef TARGET_PREFERRED_OUTPUT_RELOAD_CLASS |
| #define TARGET_PREFERRED_OUTPUT_RELOAD_CLASS m32c_preferred_output_reload_class |
| |
| static reg_class_t |
| m32c_preferred_output_reload_class (rtx x, reg_class_t rclass) |
| { |
| return m32c_preferred_reload_class (x, rclass); |
| } |
| |
| /* Implements LIMIT_RELOAD_CLASS. We basically want to avoid using |
| address registers for reloads since they're needed for address |
| reloads. */ |
| int |
| m32c_limit_reload_class (enum machine_mode mode, int rclass) |
| { |
| #if DEBUG_RELOAD |
| fprintf (stderr, "limit_reload_class for %s: %s ->", |
| mode_name[mode], class_names[rclass]); |
| #endif |
| |
| if (mode == QImode) |
| rclass = reduce_class (rclass, HL_REGS, rclass); |
| else if (mode == HImode) |
| rclass = reduce_class (rclass, HI_REGS, rclass); |
| else if (mode == SImode) |
| rclass = reduce_class (rclass, SI_REGS, rclass); |
| |
| if (rclass != A_REGS) |
| rclass = reduce_class (rclass, DI_REGS, rclass); |
| |
| #if DEBUG_RELOAD |
| fprintf (stderr, " %s\n", class_names[rclass]); |
| #endif |
| return rclass; |
| } |
| |
| /* Implements SECONDARY_RELOAD_CLASS. QImode have to be reloaded in |
| r0 or r1, as those are the only real QImode registers. CR regs get |
| reloaded through appropriately sized general or address |
| registers. */ |
| int |
| m32c_secondary_reload_class (int rclass, enum machine_mode mode, rtx x) |
| { |
| int cc = class_contents[rclass][0]; |
| #if DEBUG0 |
| fprintf (stderr, "\nsecondary reload class %s %s\n", |
| class_names[rclass], mode_name[mode]); |
| debug_rtx (x); |
| #endif |
| if (mode == QImode |
| && GET_CODE (x) == MEM && (cc & ~class_contents[R23_REGS][0]) == 0) |
| return QI_REGS; |
| if (reg_classes_intersect_p (rclass, CR_REGS) |
| && GET_CODE (x) == REG |
| && REGNO (x) >= SB_REGNO && REGNO (x) <= SP_REGNO) |
| return (TARGET_A16 || mode == HImode) ? HI_REGS : A_REGS; |
| return NO_REGS; |
| } |
| |
| /* Implements TARGET_CLASS_LIKELY_SPILLED_P. A_REGS is needed for address |
| reloads. */ |
| |
| #undef TARGET_CLASS_LIKELY_SPILLED_P |
| #define TARGET_CLASS_LIKELY_SPILLED_P m32c_class_likely_spilled_p |
| |
| static bool |
| m32c_class_likely_spilled_p (reg_class_t regclass) |
| { |
| if (regclass == A_REGS) |
| return true; |
| |
| return (reg_class_size[(int) regclass] == 1); |
| } |
| |
| /* Implements TARGET_CLASS_MAX_NREGS. We calculate this according to its |
| documented meaning, to avoid potential inconsistencies with actual |
| class definitions. */ |
| |
| #undef TARGET_CLASS_MAX_NREGS |
| #define TARGET_CLASS_MAX_NREGS m32c_class_max_nregs |
| |
| static unsigned char |
| m32c_class_max_nregs (reg_class_t regclass, enum machine_mode mode) |
| { |
| int rn; |
| unsigned char max = 0; |
| |
| for (rn = 0; rn < FIRST_PSEUDO_REGISTER; rn++) |
| if (TEST_HARD_REG_BIT (reg_class_contents[(int) regclass], rn)) |
| { |
| unsigned char n = m32c_hard_regno_nregs (rn, mode); |
| if (max < n) |
| max = n; |
| } |
| return max; |
| } |
| |
| /* Implements CANNOT_CHANGE_MODE_CLASS. Only r0 and r1 can change to |
| QI (r0l, r1l) because the chip doesn't support QI ops on other |
| registers (well, it does on a0/a1 but if we let gcc do that, reload |
| suffers). Otherwise, we allow changes to larger modes. */ |
| int |
| m32c_cannot_change_mode_class (enum machine_mode from, |
| enum machine_mode to, int rclass) |
| { |
| int rn; |
| #if DEBUG0 |
| fprintf (stderr, "cannot change from %s to %s in %s\n", |
| mode_name[from], mode_name[to], class_names[rclass]); |
| #endif |
| |
| /* If the larger mode isn't allowed in any of these registers, we |
| can't allow the change. */ |
| for (rn = 0; rn < FIRST_PSEUDO_REGISTER; rn++) |
| if (class_contents[rclass][0] & (1 << rn)) |
| if (! m32c_hard_regno_ok (rn, to)) |
| return 1; |
| |
| if (to == QImode) |
| return (class_contents[rclass][0] & 0x1ffa); |
| |
| if (class_contents[rclass][0] & 0x0005 /* r0, r1 */ |
| && GET_MODE_SIZE (from) > 1) |
| return 0; |
| if (GET_MODE_SIZE (from) > 2) /* all other regs */ |
| return 0; |
| |
| return 1; |
| } |
| |
| /* Helpers for the rest of the file. */ |
| /* TRUE if the rtx is a REG rtx for the given register. */ |
| #define IS_REG(rtx,regno) (GET_CODE (rtx) == REG \ |
| && REGNO (rtx) == regno) |
| /* TRUE if the rtx is a pseudo - specifically, one we can use as a |
| base register in address calculations (hence the "strict" |
| argument). */ |
| #define IS_PSEUDO(rtx,strict) (!strict && GET_CODE (rtx) == REG \ |
| && (REGNO (rtx) == AP_REGNO \ |
| || REGNO (rtx) >= FIRST_PSEUDO_REGISTER)) |
| |
| /* Implements CONST_OK_FOR_CONSTRAINT_P. Currently, all constant |
| constraints start with 'I', with the next two characters indicating |
| the type and size of the range allowed. */ |
| int |
| m32c_const_ok_for_constraint_p (HOST_WIDE_INT value, |
| char c ATTRIBUTE_UNUSED, const char *str) |
| { |
| /* s=signed u=unsigned n=nonzero m=minus l=log2able, |
| [sun] bits [SUN] bytes, p=pointer size |
| I[-0-9][0-9] matches that number */ |
| if (memcmp (str, "Is3", 3) == 0) |
| { |
| return (-8 <= value && value <= 7); |
| } |
| if (memcmp (str, "IS1", 3) == 0) |
| { |
| return (-128 <= value && value <= 127); |
| } |
| if (memcmp (str, "IS2", 3) == 0) |
| { |
| return (-32768 <= value && value <= 32767); |
| } |
| if (memcmp (str, "IU2", 3) == 0) |
| { |
| return (0 <= value && value <= 65535); |
| } |
| if (memcmp (str, "IU3", 3) == 0) |
| { |
| return (0 <= value && value <= 0x00ffffff); |
| } |
| if (memcmp (str, "In4", 3) == 0) |
| { |
| return (-8 <= value && value && value <= 8); |
| } |
| if (memcmp (str, "In5", 3) == 0) |
| { |
| return (-16 <= value && value && value <= 16); |
| } |
| if (memcmp (str, "In6", 3) == 0) |
| { |
| return (-32 <= value && value && value <= 32); |
| } |
| if (memcmp (str, "IM2", 3) == 0) |
| { |
| return (-65536 <= value && value && value <= -1); |
| } |
| if (memcmp (str, "Ilb", 3) == 0) |
| { |
| int b = exact_log2 (value); |
| return (b >= 0 && b <= 7); |
| } |
| if (memcmp (str, "Imb", 3) == 0) |
| { |
| int b = exact_log2 ((value ^ 0xff) & 0xff); |
| return (b >= 0 && b <= 7); |
| } |
| if (memcmp (str, "ImB", 3) == 0) |
| { |
| int b = exact_log2 ((value ^ 0xffff) & 0xffff); |
| return (b >= 0 && b <= 7); |
| } |
| if (memcmp (str, "Ilw", 3) == 0) |
| { |
| int b = exact_log2 (value); |
| return (b >= 0 && b <= 15); |
| } |
| if (memcmp (str, "Imw", 3) == 0) |
| { |
| int b = exact_log2 ((value ^ 0xffff) & 0xffff); |
| return (b >= 0 && b <= 15); |
| } |
| if (memcmp (str, "I00", 3) == 0) |
| { |
| return (value == 0); |
| } |
| return 0; |
| } |
| |
| #define A0_OR_PSEUDO(x) (IS_REG(x, A0_REGNO) || REGNO (x) >= FIRST_PSEUDO_REGISTER) |
| |
| /* Implements EXTRA_CONSTRAINT_STR (see next function too). 'S' is |
| for memory constraints, plus "Rpa" for PARALLEL rtx's we use for |
| call return values. */ |
| int |
| m32c_extra_constraint_p2 (rtx value, char c ATTRIBUTE_UNUSED, const char *str) |
| { |
| encode_pattern (value); |
| |
| if (far_addr_space_p (value)) |
| { |
| if (memcmp (str, "SF", 2) == 0) |
| { |
| return ( (RTX_IS ("mr") |
| && A0_OR_PSEUDO (patternr[1]) |
| && GET_MODE (patternr[1]) == SImode) |
| || (RTX_IS ("m+^Sri") |
| && A0_OR_PSEUDO (patternr[4]) |
| && GET_MODE (patternr[4]) == HImode) |
| || (RTX_IS ("m+^Srs") |
| && A0_OR_PSEUDO (patternr[4]) |
| && GET_MODE (patternr[4]) == HImode) |
| || (RTX_IS ("m+^S+ris") |
| && A0_OR_PSEUDO (patternr[5]) |
| && GET_MODE (patternr[5]) == HImode) |
| || RTX_IS ("ms") |
| ); |
| } |
| return 0; |
| } |
| |
| if (memcmp (str, "Sd", 2) == 0) |
| { |
| /* This is the common "src/dest" address */ |
| rtx r; |
| if (GET_CODE (value) == MEM && CONSTANT_P (XEXP (value, 0))) |
| return 1; |
| if (RTX_IS ("ms") || RTX_IS ("m+si")) |
| return 1; |
| if (RTX_IS ("m++rii")) |
| { |
| if (REGNO (patternr[3]) == FB_REGNO |
| && INTVAL (patternr[4]) == 0) |
| return 1; |
| } |
| if (RTX_IS ("mr")) |
| r = patternr[1]; |
| else if (RTX_IS ("m+ri") || RTX_IS ("m+rs") || RTX_IS ("m+r+si")) |
| r = patternr[2]; |
| else |
| return 0; |
| if (REGNO (r) == SP_REGNO) |
| return 0; |
| return m32c_legitimate_address_p (GET_MODE (value), XEXP (value, 0), 1); |
| } |
| else if (memcmp (str, "Sa", 2) == 0) |
| { |
| rtx r; |
| if (RTX_IS ("mr")) |
| r = patternr[1]; |
| else if (RTX_IS ("m+ri")) |
| r = patternr[2]; |
| else |
| return 0; |
| return (IS_REG (r, A0_REGNO) || IS_REG (r, A1_REGNO)); |
| } |
| else if (memcmp (str, "Si", 2) == 0) |
| { |
| return (RTX_IS ("mi") || RTX_IS ("ms") || RTX_IS ("m+si")); |
| } |
| else if (memcmp (str, "Ss", 2) == 0) |
| { |
| return ((RTX_IS ("mr") |
| && (IS_REG (patternr[1], SP_REGNO))) |
| || (RTX_IS ("m+ri") && (IS_REG (patternr[2], SP_REGNO)))); |
| } |
| else if (memcmp (str, "Sf", 2) == 0) |
| { |
| return ((RTX_IS ("mr") |
| && (IS_REG (patternr[1], FB_REGNO))) |
| || (RTX_IS ("m+ri") && (IS_REG (patternr[2], FB_REGNO)))); |
| } |
| else if (memcmp (str, "Sb", 2) == 0) |
| { |
| return ((RTX_IS ("mr") |
| && (IS_REG (patternr[1], SB_REGNO))) |
| || (RTX_IS ("m+ri") && (IS_REG (patternr[2], SB_REGNO)))); |
| } |
| else if (memcmp (str, "Sp", 2) == 0) |
| { |
| /* Absolute addresses 0..0x1fff used for bit addressing (I/O ports) */ |
| return (RTX_IS ("mi") |
| && !(INTVAL (patternr[1]) & ~0x1fff)); |
| } |
| else if (memcmp (str, "S1", 2) == 0) |
| { |
| return r1h_operand (value, QImode); |
| } |
| else if (memcmp (str, "SF", 2) == 0) |
| { |
| return 0; |
| } |
| |
| gcc_assert (str[0] != 'S'); |
| |
| if (memcmp (str, "Rpa", 2) == 0) |
| return GET_CODE (value) == PARALLEL; |
| |
| return 0; |
| } |
| |
| /* This is for when we're debugging the above. */ |
| int |
| m32c_extra_constraint_p (rtx value, char c, const char *str) |
| { |
| int rv = m32c_extra_constraint_p2 (value, c, str); |
| #if DEBUG0 |
| fprintf (stderr, "\nconstraint %.*s: %d\n", CONSTRAINT_LEN (c, str), str, |
| rv); |
| debug_rtx (value); |
| #endif |
| return rv; |
| } |
| |
| /* Implements EXTRA_MEMORY_CONSTRAINT. Currently, we only use strings |
| starting with 'S'. */ |
| int |
| m32c_extra_memory_constraint (char c, const char *str ATTRIBUTE_UNUSED) |
| { |
| return c == 'S'; |
| } |
| |
| /* Implements EXTRA_ADDRESS_CONSTRAINT. We reserve 'A' strings for these, |
| but don't currently define any. */ |
| int |
| m32c_extra_address_constraint (char c, const char *str ATTRIBUTE_UNUSED) |
| { |
| return c == 'A'; |
| } |
| |
| /* STACK AND CALLING */ |
| |
| /* Frame Layout */ |
| |
| /* Implements RETURN_ADDR_RTX. Note that R8C and M16C push 24 bits |
| (yes, THREE bytes) onto the stack for the return address, but we |
| don't support pointers bigger than 16 bits on those chips. This |
| will likely wreak havoc with exception unwinding. FIXME. */ |
| rtx |
| m32c_return_addr_rtx (int count) |
| { |
| enum machine_mode mode; |
| int offset; |
| rtx ra_mem; |
| |
| if (count) |
| return NULL_RTX; |
| /* we want 2[$fb] */ |
| |
| if (TARGET_A24) |
| { |
| /* It's four bytes */ |
| mode = PSImode; |
| offset = 4; |
| } |
| else |
| { |
| /* FIXME: it's really 3 bytes */ |
| mode = HImode; |
| offset = 2; |
| } |
| |
| ra_mem = |
| gen_rtx_MEM (mode, plus_constant (gen_rtx_REG (Pmode, FP_REGNO), offset)); |
| return copy_to_mode_reg (mode, ra_mem); |
| } |
| |
| /* Implements INCOMING_RETURN_ADDR_RTX. See comment above. */ |
| rtx |
| m32c_incoming_return_addr_rtx (void) |
| { |
| /* we want [sp] */ |
| return gen_rtx_MEM (PSImode, gen_rtx_REG (PSImode, SP_REGNO)); |
| } |
| |
| /* Exception Handling Support */ |
| |
| /* Implements EH_RETURN_DATA_REGNO. Choose registers able to hold |
| pointers. */ |
| int |
| m32c_eh_return_data_regno (int n) |
| { |
| switch (n) |
| { |
| case 0: |
| return A0_REGNO; |
| case 1: |
| if (TARGET_A16) |
| return R3_REGNO; |
| else |
| return R1_REGNO; |
| default: |
| return INVALID_REGNUM; |
| } |
| } |
| |
| /* Implements EH_RETURN_STACKADJ_RTX. Saved and used later in |
| m32c_emit_eh_epilogue. */ |
| rtx |
| m32c_eh_return_stackadj_rtx (void) |
| { |
| if (!cfun->machine->eh_stack_adjust) |
| { |
| rtx sa; |
| |
| sa = gen_rtx_REG (Pmode, R0_REGNO); |
| cfun->machine->eh_stack_adjust = sa; |
| } |
| return cfun->machine->eh_stack_adjust; |
| } |
| |
| /* Registers That Address the Stack Frame */ |
| |
| /* Implements DWARF_FRAME_REGNUM and DBX_REGISTER_NUMBER. Note that |
| the original spec called for dwarf numbers to vary with register |
| width as well, for example, r0l, r0, and r2r0 would each have |
| different dwarf numbers. GCC doesn't support this, and we don't do |
| it, and gdb seems to like it this way anyway. */ |
| unsigned int |
| m32c_dwarf_frame_regnum (int n) |
| { |
| switch (n) |
| { |
| case R0_REGNO: |
| return 5; |
| case R1_REGNO: |
| return 6; |
| case R2_REGNO: |
| return 7; |
| case R3_REGNO: |
| return 8; |
| case A0_REGNO: |
| return 9; |
| case A1_REGNO: |
| return 10; |
| case FB_REGNO: |
| return 11; |
| case SB_REGNO: |
| return 19; |
| |
| case SP_REGNO: |
| return 12; |
| case PC_REGNO: |
| return 13; |
| default: |
| return DWARF_FRAME_REGISTERS + 1; |
| } |
| } |
| |
| /* The frame looks like this: |
| |
| ap -> +------------------------------ |
| | Return address (3 or 4 bytes) |
| | Saved FB (2 or 4 bytes) |
| fb -> +------------------------------ |
| | local vars |
| | register saves fb |
| | through r0 as needed |
| sp -> +------------------------------ |
| */ |
| |
| /* We use this to wrap all emitted insns in the prologue. */ |
| static rtx |
| F (rtx x) |
| { |
| RTX_FRAME_RELATED_P (x) = 1; |
| return x; |
| } |
| |
| /* This maps register numbers to the PUSHM/POPM bitfield, and tells us |
| how much the stack pointer moves for each, for each cpu family. */ |
| static struct |
| { |
| int reg1; |
| int bit; |
| int a16_bytes; |
| int a24_bytes; |
| } pushm_info[] = |
| { |
| /* These are in reverse push (nearest-to-sp) order. */ |
| { R0_REGNO, 0x80, 2, 2 }, |
| { R1_REGNO, 0x40, 2, 2 }, |
| { R2_REGNO, 0x20, 2, 2 }, |
| { R3_REGNO, 0x10, 2, 2 }, |
| { A0_REGNO, 0x08, 2, 4 }, |
| { A1_REGNO, 0x04, 2, 4 }, |
| { SB_REGNO, 0x02, 2, 4 }, |
| { FB_REGNO, 0x01, 2, 4 } |
| }; |
| |
| #define PUSHM_N (sizeof(pushm_info)/sizeof(pushm_info[0])) |
| |
| /* Returns TRUE if we need to save/restore the given register. We |
| save everything for exception handlers, so that any register can be |
| unwound. For interrupt handlers, we save everything if the handler |
| calls something else (because we don't know what *that* function |
| might do), but try to be a bit smarter if the handler is a leaf |
| function. We always save $a0, though, because we use that in the |
| epilogue to copy $fb to $sp. */ |
| static int |
| need_to_save (int regno) |
| { |
| if (fixed_regs[regno]) |
| return 0; |
| if (crtl->calls_eh_return) |
| return 1; |
| if (regno == FP_REGNO) |
| return 0; |
| if (cfun->machine->is_interrupt |
| && (!cfun->machine->is_leaf |
| || (regno == A0_REGNO |
| && m32c_function_needs_enter ()) |
| )) |
| return 1; |
| if (df_regs_ever_live_p (regno) |
| && (!call_used_regs[regno] || cfun->machine->is_interrupt)) |
| return 1; |
| return 0; |
| } |
| |
| /* This function contains all the intelligence about saving and |
| restoring registers. It always figures out the register save set. |
| When called with PP_justcount, it merely returns the size of the |
| save set (for eliminating the frame pointer, for example). When |
| called with PP_pushm or PP_popm, it emits the appropriate |
| instructions for saving (pushm) or restoring (popm) the |
| registers. */ |
| static int |
| m32c_pushm_popm (Push_Pop_Type ppt) |
| { |
| int reg_mask = 0; |
| int byte_count = 0, bytes; |
| int i; |
| rtx dwarf_set[PUSHM_N]; |
| int n_dwarfs = 0; |
| int nosave_mask = 0; |
| |
| if (crtl->return_rtx |
| && GET_CODE (crtl->return_rtx) == PARALLEL |
| && !(crtl->calls_eh_return || cfun->machine->is_interrupt)) |
| { |
| rtx exp = XVECEXP (crtl->return_rtx, 0, 0); |
| rtx rv = XEXP (exp, 0); |
| int rv_bytes = GET_MODE_SIZE (GET_MODE (rv)); |
| |
| if (rv_bytes > 2) |
| nosave_mask |= 0x20; /* PSI, SI */ |
| else |
| nosave_mask |= 0xf0; /* DF */ |
| if (rv_bytes > 4) |
| nosave_mask |= 0x50; /* DI */ |
| } |
| |
| for (i = 0; i < (int) PUSHM_N; i++) |
| { |
| /* Skip if neither register needs saving. */ |
| if (!need_to_save (pushm_info[i].reg1)) |
| continue; |
| |
| if (pushm_info[i].bit & nosave_mask) |
| continue; |
| |
| reg_mask |= pushm_info[i].bit; |
| bytes = TARGET_A16 ? pushm_info[i].a16_bytes : pushm_info[i].a24_bytes; |
| |
| if (ppt == PP_pushm) |
| { |
| enum machine_mode mode = (bytes == 2) ? HImode : SImode; |
| rtx addr; |
| |
| /* Always use stack_pointer_rtx instead of calling |
| rtx_gen_REG ourselves. Code elsewhere in GCC assumes |
| that there is a single rtx representing the stack pointer, |
| namely stack_pointer_rtx, and uses == to recognize it. */ |
| addr = stack_pointer_rtx; |
| |
| if (byte_count != 0) |
| addr = gen_rtx_PLUS (GET_MODE (addr), addr, GEN_INT (byte_count)); |
| |
| dwarf_set[n_dwarfs++] = |
| gen_rtx_SET (VOIDmode, |
| gen_rtx_MEM (mode, addr), |
| gen_rtx_REG (mode, pushm_info[i].reg1)); |
| F (dwarf_set[n_dwarfs - 1]); |
| |
| } |
| byte_count += bytes; |
| } |
| |
| if (cfun->machine->is_interrupt) |
| { |
| cfun->machine->intr_pushm = reg_mask & 0xfe; |
| reg_mask = 0; |
| byte_count = 0; |
| } |
| |
| if (cfun->machine->is_interrupt) |
| for (i = MEM0_REGNO; i <= MEM7_REGNO; i++) |
| if (need_to_save (i)) |
| { |
| byte_count += 2; |
| cfun->machine->intr_pushmem[i - MEM0_REGNO] = 1; |
| } |
| |
| if (ppt == PP_pushm && byte_count) |
| { |
| rtx note = gen_rtx_SEQUENCE (VOIDmode, rtvec_alloc (n_dwarfs + 1)); |
| rtx pushm; |
| |
| if (reg_mask) |
| { |
| XVECEXP (note, 0, 0) |
| = gen_rtx_SET (VOIDmode, |
| stack_pointer_rtx, |
| gen_rtx_PLUS (GET_MODE (stack_pointer_rtx), |
| stack_pointer_rtx, |
| GEN_INT (-byte_count))); |
| F (XVECEXP (note, 0, 0)); |
| |
| for (i = 0; i < n_dwarfs; i++) |
| XVECEXP (note, 0, i + 1) = dwarf_set[i]; |
| |
| pushm = F (emit_insn (gen_pushm (GEN_INT (reg_mask)))); |
| |
| add_reg_note (pushm, REG_FRAME_RELATED_EXPR, note); |
| } |
| |
| if (cfun->machine->is_interrupt) |
| for (i = MEM0_REGNO; i <= MEM7_REGNO; i++) |
| if (cfun->machine->intr_pushmem[i - MEM0_REGNO]) |
| { |
| if (TARGET_A16) |
| pushm = emit_insn (gen_pushhi_16 (gen_rtx_REG (HImode, i))); |
| else |
| pushm = emit_insn (gen_pushhi_24 (gen_rtx_REG (HImode, i))); |
| F (pushm); |
| } |
| } |
| if (ppt == PP_popm && byte_count) |
| { |
| if (cfun->machine->is_interrupt) |
| for (i = MEM7_REGNO; i >= MEM0_REGNO; i--) |
| if (cfun->machine->intr_pushmem[i - MEM0_REGNO]) |
| { |
| if (TARGET_A16) |
| emit_insn (gen_pophi_16 (gen_rtx_REG (HImode, i))); |
| else |
| emit_insn (gen_pophi_24 (gen_rtx_REG (HImode, i))); |
| } |
| if (reg_mask) |
| emit_insn (gen_popm (GEN_INT (reg_mask))); |
| } |
| |
| return byte_count; |
| } |
| |
| /* Implements INITIAL_ELIMINATION_OFFSET. See the comment above that |
| diagrams our call frame. */ |
| int |
| m32c_initial_elimination_offset (int from, int to) |
| { |
| int ofs = 0; |
| |
| if (from == AP_REGNO) |
| { |
| if (TARGET_A16) |
| ofs += 5; |
| else |
| ofs += 8; |
| } |
| |
| if (to == SP_REGNO) |
| { |
| ofs += m32c_pushm_popm (PP_justcount); |
| ofs += get_frame_size (); |
| } |
| |
| /* Account for push rounding. */ |
| if (TARGET_A24) |
| ofs = (ofs + 1) & ~1; |
| #if DEBUG0 |
| fprintf (stderr, "initial_elimination_offset from=%d to=%d, ofs=%d\n", from, |
| to, ofs); |
| #endif |
| return ofs; |
| } |
| |
| /* Passing Function Arguments on the Stack */ |
| |
| /* Implements PUSH_ROUNDING. The R8C and M16C have byte stacks, the |
| M32C has word stacks. */ |
| unsigned int |
| m32c_push_rounding (int n) |
| { |
| if (TARGET_R8C || TARGET_M16C) |
| return n; |
| return (n + 1) & ~1; |
| } |
| |
| /* Passing Arguments in Registers */ |
| |
| /* Implements TARGET_FUNCTION_ARG. Arguments are passed partly in |
| registers, partly on stack. If our function returns a struct, a |
| pointer to a buffer for it is at the top of the stack (last thing |
| pushed). The first few real arguments may be in registers as |
| follows: |
| |
| R8C/M16C: arg1 in r1 if it's QI or HI (else it's pushed on stack) |
| arg2 in r2 if it's HI (else pushed on stack) |
| rest on stack |
| M32C: arg1 in r0 if it's QI or HI (else it's pushed on stack) |
| rest on stack |
| |
| Structs are not passed in registers, even if they fit. Only |
| integer and pointer types are passed in registers. |
| |
| Note that when arg1 doesn't fit in r1, arg2 may still be passed in |
| r2 if it fits. */ |
| #undef TARGET_FUNCTION_ARG |
| #define TARGET_FUNCTION_ARG m32c_function_arg |
| static rtx |
| m32c_function_arg (cumulative_args_t ca_v, |
| enum machine_mode mode, const_tree type, bool named) |
| { |
| CUMULATIVE_ARGS *ca = get_cumulative_args (ca_v); |
| |
| /* Can return a reg, parallel, or 0 for stack */ |
| rtx rv = NULL_RTX; |
| #if DEBUG0 |
| fprintf (stderr, "func_arg %d (%s, %d)\n", |
| ca->parm_num, mode_name[mode], named); |
| debug_tree (type); |
| #endif |
| |
| if (mode == VOIDmode) |
| return GEN_INT (0); |
| |
| if (ca->force_mem || !named) |
| { |
| #if DEBUG0 |
| fprintf (stderr, "func arg: force %d named %d, mem\n", ca->force_mem, |
| named); |
| #endif |
| return NULL_RTX; |
| } |
| |
| if (type && INTEGRAL_TYPE_P (type) && POINTER_TYPE_P (type)) |
| return NULL_RTX; |
| |
| if (type && AGGREGATE_TYPE_P (type)) |
| return NULL_RTX; |
| |
| switch (ca->parm_num) |
| { |
| case 1: |
| if (GET_MODE_SIZE (mode) == 1 || GET_MODE_SIZE (mode) == 2) |
| rv = gen_rtx_REG (mode, TARGET_A16 ? R1_REGNO : R0_REGNO); |
| break; |
| |
| case 2: |
| if (TARGET_A16 && GET_MODE_SIZE (mode) == 2) |
| rv = gen_rtx_REG (mode, R2_REGNO); |
| break; |
| } |
| |
| #if DEBUG0 |
| debug_rtx (rv); |
| #endif |
| return rv; |
| } |
| |
| #undef TARGET_PASS_BY_REFERENCE |
| #define TARGET_PASS_BY_REFERENCE m32c_pass_by_reference |
| static bool |
| m32c_pass_by_reference (cumulative_args_t ca ATTRIBUTE_UNUSED, |
| enum machine_mode mode ATTRIBUTE_UNUSED, |
| const_tree type ATTRIBUTE_UNUSED, |
| bool named ATTRIBUTE_UNUSED) |
| { |
| return 0; |
| } |
| |
| /* Implements INIT_CUMULATIVE_ARGS. */ |
| void |
| m32c_init_cumulative_args (CUMULATIVE_ARGS * ca, |
| tree fntype, |
| rtx libname ATTRIBUTE_UNUSED, |
| tree fndecl, |
| int n_named_args ATTRIBUTE_UNUSED) |
| { |
| if (fntype && aggregate_value_p (TREE_TYPE (fntype), fndecl)) |
| ca->force_mem = 1; |
| else |
| ca->force_mem = 0; |
| ca->parm_num = 1; |
| } |
| |
| /* Implements TARGET_FUNCTION_ARG_ADVANCE. force_mem is set for |
| functions returning structures, so we always reset that. Otherwise, |
| we only need to know the sequence number of the argument to know what |
| to do with it. */ |
| #undef TARGET_FUNCTION_ARG_ADVANCE |
| #define TARGET_FUNCTION_ARG_ADVANCE m32c_function_arg_advance |
| static void |
| m32c_function_arg_advance (cumulative_args_t ca_v, |
| enum machine_mode mode ATTRIBUTE_UNUSED, |
| const_tree type ATTRIBUTE_UNUSED, |
| bool named ATTRIBUTE_UNUSED) |
| { |
| CUMULATIVE_ARGS *ca = get_cumulative_args (ca_v); |
| |
| if (ca->force_mem) |
| ca->force_mem = 0; |
| else |
| ca->parm_num++; |
| } |
| |
| /* Implements TARGET_FUNCTION_ARG_BOUNDARY. */ |
| #undef TARGET_FUNCTION_ARG_BOUNDARY |
| #define TARGET_FUNCTION_ARG_BOUNDARY m32c_function_arg_boundary |
| static unsigned int |
| m32c_function_arg_boundary (enum machine_mode mode ATTRIBUTE_UNUSED, |
| const_tree type ATTRIBUTE_UNUSED) |
| { |
| return (TARGET_A16 ? 8 : 16); |
| } |
| |
| /* Implements FUNCTION_ARG_REGNO_P. */ |
| int |
| m32c_function_arg_regno_p (int r) |
| { |
| if (TARGET_A24) |
| return (r == R0_REGNO); |
| return (r == R1_REGNO || r == R2_REGNO); |
| } |
| |
| /* HImode and PSImode are the two "native" modes as far as GCC is |
| concerned, but the chips also support a 32-bit mode which is used |
| for some opcodes in R8C/M16C and for reset vectors and such. */ |
| #undef TARGET_VALID_POINTER_MODE |
| #define TARGET_VALID_POINTER_MODE m32c_valid_pointer_mode |
| static bool |
| m32c_valid_pointer_mode (enum machine_mode mode) |
| { |
| if (mode == HImode |
| || mode == PSImode |
| || mode == SImode |
| ) |
| return 1; |
| return 0; |
| } |
| |
| /* How Scalar Function Values Are Returned */ |
| |
| /* Implements TARGET_LIBCALL_VALUE. Most values are returned in $r0, or some |
| combination of registers starting there (r2r0 for longs, r3r1r2r0 |
| for long long, r3r2r1r0 for doubles), except that that ABI |
| currently doesn't work because it ends up using all available |
| general registers and gcc often can't compile it. So, instead, we |
| return anything bigger than 16 bits in "mem0" (effectively, a |
| memory location). */ |
| |
| #undef TARGET_LIBCALL_VALUE |
| #define TARGET_LIBCALL_VALUE m32c_libcall_value |
| |
| static rtx |
| m32c_libcall_value (enum machine_mode mode, const_rtx fun ATTRIBUTE_UNUSED) |
| { |
| /* return reg or parallel */ |
| #if 0 |
| /* FIXME: GCC has difficulty returning large values in registers, |
| because that ties up most of the general registers and gives the |
| register allocator little to work with. Until we can resolve |
| this, large values are returned in memory. */ |
| if (mode == DFmode) |
| { |
| rtx rv; |
| |
| rv = gen_rtx_PARALLEL (mode, rtvec_alloc (4)); |
| XVECEXP (rv, 0, 0) = gen_rtx_EXPR_LIST (VOIDmode, |
| gen_rtx_REG (HImode, |
| R0_REGNO), |
| GEN_INT (0)); |
| XVECEXP (rv, 0, 1) = gen_rtx_EXPR_LIST (VOIDmode, |
| gen_rtx_REG (HImode, |
| R1_REGNO), |
| GEN_INT (2)); |
| XVECEXP (rv, 0, 2) = gen_rtx_EXPR_LIST (VOIDmode, |
| gen_rtx_REG (HImode, |
| R2_REGNO), |
| GEN_INT (4)); |
| XVECEXP (rv, 0, 3) = gen_rtx_EXPR_LIST (VOIDmode, |
| gen_rtx_REG (HImode, |
| R3_REGNO), |
| GEN_INT (6)); |
| return rv; |
| } |
| |
| if (TARGET_A24 && GET_MODE_SIZE (mode) > 2) |
| { |
| rtx rv; |
| |
| rv = gen_rtx_PARALLEL (mode, rtvec_alloc (1)); |
| XVECEXP (rv, 0, 0) = gen_rtx_EXPR_LIST (VOIDmode, |
| gen_rtx_REG (mode, |
| R0_REGNO), |
| GEN_INT (0)); |
| return rv; |
| } |
| #endif |
| |
| if (GET_MODE_SIZE (mode) > 2) |
| return gen_rtx_REG (mode, MEM0_REGNO); |
| return gen_rtx_REG (mode, R0_REGNO); |
| } |
| |
| /* Implements TARGET_FUNCTION_VALUE. Functions and libcalls have the same |
| conventions. */ |
| |
| #undef TARGET_FUNCTION_VALUE |
| #define TARGET_FUNCTION_VALUE m32c_function_value |
| |
| static rtx |
| m32c_function_value (const_tree valtype, |
| const_tree fn_decl_or_type ATTRIBUTE_UNUSED, |
| bool outgoing ATTRIBUTE_UNUSED) |
| { |
| /* return reg or parallel */ |
| const enum machine_mode mode = TYPE_MODE (valtype); |
| return m32c_libcall_value (mode, NULL_RTX); |
| } |
| |
| /* Implements TARGET_FUNCTION_VALUE_REGNO_P. */ |
| |
| #undef TARGET_FUNCTION_VALUE_REGNO_P |
| #define TARGET_FUNCTION_VALUE_REGNO_P m32c_function_value_regno_p |
| |
| static bool |
| m32c_function_value_regno_p (const unsigned int regno) |
| { |
| return (regno == R0_REGNO || regno == MEM0_REGNO); |
| } |
| |
| /* How Large Values Are Returned */ |
| |
| /* We return structures by pushing the address on the stack, even if |
| we use registers for the first few "real" arguments. */ |
| #undef TARGET_STRUCT_VALUE_RTX |
| #define TARGET_STRUCT_VALUE_RTX m32c_struct_value_rtx |
| static rtx |
| m32c_struct_value_rtx (tree fndecl ATTRIBUTE_UNUSED, |
| int incoming ATTRIBUTE_UNUSED) |
| { |
| return 0; |
| } |
| |
| /* Function Entry and Exit */ |
| |
| /* Implements EPILOGUE_USES. Interrupts restore all registers. */ |
| int |
| m32c_epilogue_uses (int regno ATTRIBUTE_UNUSED) |
| { |
| if (cfun->machine->is_interrupt) |
| return 1; |
| return 0; |
| } |
| |
| /* Implementing the Varargs Macros */ |
| |
| #undef TARGET_STRICT_ARGUMENT_NAMING |
| #define TARGET_STRICT_ARGUMENT_NAMING m32c_strict_argument_naming |
| static bool |
| m32c_strict_argument_naming (cumulative_args_t ca ATTRIBUTE_UNUSED) |
| { |
| return 1; |
| } |
| |
| /* Trampolines for Nested Functions */ |
| |
| /* |
| m16c: |
| 1 0000 75C43412 mov.w #0x1234,a0 |
| 2 0004 FC000000 jmp.a label |
| |
| m32c: |
| 1 0000 BC563412 mov.l:s #0x123456,a0 |
| 2 0004 CC000000 jmp.a label |
| */ |
| |
| /* Implements TRAMPOLINE_SIZE. */ |
| int |
| m32c_trampoline_size (void) |
| { |
| /* Allocate extra space so we can avoid the messy shifts when we |
| initialize the trampoline; we just write past the end of the |
| opcode. */ |
| return TARGET_A16 ? 8 : 10; |
| } |
| |
| /* Implements TRAMPOLINE_ALIGNMENT. */ |
| int |
| m32c_trampoline_alignment (void) |
| { |
| return 2; |
| } |
| |
| /* Implements TARGET_TRAMPOLINE_INIT. */ |
| |
| #undef TARGET_TRAMPOLINE_INIT |
| #define TARGET_TRAMPOLINE_INIT m32c_trampoline_init |
| static void |
| m32c_trampoline_init (rtx m_tramp, tree fndecl, rtx chainval) |
| { |
| rtx function = XEXP (DECL_RTL (fndecl), 0); |
| |
| #define A0(m,i) adjust_address (m_tramp, m, i) |
| if (TARGET_A16) |
| { |
| /* Note: we subtract a "word" because the moves want signed |
| constants, not unsigned constants. */ |
| emit_move_insn (A0 (HImode, 0), GEN_INT (0xc475 - 0x10000)); |
| emit_move_insn (A0 (HImode, 2), chainval); |
| emit_move_insn (A0 (QImode, 4), GEN_INT (0xfc - 0x100)); |
| /* We use 16-bit addresses here, but store the zero to turn it |
| into a 24-bit offset. */ |
| emit_move_insn (A0 (HImode, 5), function); |
| emit_move_insn (A0 (QImode, 7), GEN_INT (0x00)); |
| } |
| else |
| { |
| /* Note that the PSI moves actually write 4 bytes. Make sure we |
| write stuff out in the right order, and leave room for the |
| extra byte at the end. */ |
| emit_move_insn (A0 (QImode, 0), GEN_INT (0xbc - 0x100)); |
| emit_move_insn (A0 (PSImode, 1), chainval); |
| emit_move_insn (A0 (QImode, 4), GEN_INT (0xcc - 0x100)); |
| emit_move_insn (A0 (PSImode, 5), function); |
| } |
| #undef A0 |
| } |
| |
| /* Implicit Calls to Library Routines */ |
| |
| #undef TARGET_INIT_LIBFUNCS |
| #define TARGET_INIT_LIBFUNCS m32c_init_libfuncs |
| static void |
| m32c_init_libfuncs (void) |
| { |
| /* We do this because the M32C has an HImode operand, but the |
| M16C has an 8-bit operand. Since gcc looks at the match data |
| and not the expanded rtl, we have to reset the optab so that |
| the right modes are found. */ |
| if (TARGET_A24) |
| { |
| set_optab_handler (cstore_optab, QImode, CODE_FOR_cstoreqi4_24); |
| set_optab_handler (cstore_optab, HImode, CODE_FOR_cstorehi4_24); |
| set_optab_handler (cstore_optab, PSImode, CODE_FOR_cstorepsi4_24); |
| } |
| } |
| |
| /* Addressing Modes */ |
| |
| /* The r8c/m32c family supports a wide range of non-orthogonal |
| addressing modes, including the ability to double-indirect on *some* |
| of them. Not all insns support all modes, either, but we rely on |
| predicates and constraints to deal with that. */ |
| #undef TARGET_LEGITIMATE_ADDRESS_P |
| #define TARGET_LEGITIMATE_ADDRESS_P m32c_legitimate_address_p |
| bool |
| m32c_legitimate_address_p (enum machine_mode mode, rtx x, bool strict) |
| { |
| int mode_adjust; |
| if (CONSTANT_P (x)) |
| return 1; |
| |
| if (TARGET_A16 && GET_MODE (x) != HImode && GET_MODE (x) != SImode) |
| return 0; |
| if (TARGET_A24 && GET_MODE (x) != PSImode) |
| return 0; |
| |
| /* Wide references to memory will be split after reload, so we must |
| ensure that all parts of such splits remain legitimate |
| addresses. */ |
| mode_adjust = GET_MODE_SIZE (mode) - 1; |
| |
| /* allowing PLUS yields mem:HI(plus:SI(mem:SI(plus:SI in m32c_split_move */ |
| if (GET_CODE (x) == PRE_DEC |
| || GET_CODE (x) == POST_INC || GET_CODE (x) == PRE_MODIFY) |
| { |
| return (GET_CODE (XEXP (x, 0)) == REG |
| && REGNO (XEXP (x, 0)) == SP_REGNO); |
| } |
| |
| #if 0 |
| /* This is the double indirection detection, but it currently |
| doesn't work as cleanly as this code implies, so until we've had |
| a chance to debug it, leave it disabled. */ |
| if (TARGET_A24 && GET_CODE (x) == MEM && GET_CODE (XEXP (x, 0)) != PLUS) |
| { |
| #if DEBUG_DOUBLE |
| fprintf (stderr, "double indirect\n"); |
| #endif |
| x = XEXP (x, 0); |
| } |
| #endif |
| |
| encode_pattern (x); |
| if (RTX_IS ("r")) |
| { |
| /* Most indexable registers can be used without displacements, |
| although some of them will be emitted with an explicit zero |
| to please the assembler. */ |
| switch (REGNO (patternr[0])) |
| { |
| case A1_REGNO: |
| case SB_REGNO: |
| case FB_REGNO: |
| case SP_REGNO: |
| if (TARGET_A16 && GET_MODE (x) == SImode) |
| return 0; |
| case A0_REGNO: |
| return 1; |
| |
| default: |
| if (IS_PSEUDO (patternr[0], strict)) |
| return 1; |
| return 0; |
| } |
| } |
| |
| if (TARGET_A16 && GET_MODE (x) == SImode) |
| return 0; |
| |
| if (RTX_IS ("+ri")) |
| { |
| /* This is more interesting, because different base registers |
| allow for different displacements - both range and signedness |
| - and it differs from chip series to chip series too. */ |
| int rn = REGNO (patternr[1]); |
| HOST_WIDE_INT offs = INTVAL (patternr[2]); |
| switch (rn) |
| { |
| case A0_REGNO: |
| case A1_REGNO: |
| case SB_REGNO: |
| /* The syntax only allows positive offsets, but when the |
| offsets span the entire memory range, we can simulate |
| negative offsets by wrapping. */ |
| if (TARGET_A16) |
| return (offs >= -65536 && offs <= 65535 - mode_adjust); |
| if (rn == SB_REGNO) |
| return (offs >= 0 && offs <= 65535 - mode_adjust); |
| /* A0 or A1 */ |
| return (offs >= -16777216 && offs <= 16777215); |
| |
| case FB_REGNO: |
| if (TARGET_A16) |
| return (offs >= -128 && offs <= 127 - mode_adjust); |
| return (offs >= -65536 && offs <= 65535 - mode_adjust); |
| |
| case SP_REGNO: |
| return (offs >= -128 && offs <= 127 - mode_adjust); |
| |
| default: |
| if (IS_PSEUDO (patternr[1], strict)) |
| return 1; |
| return 0; |
| } |
| } |
| if (RTX_IS ("+rs") || RTX_IS ("+r+si")) |
| { |
| rtx reg = patternr[1]; |
| |
| /* We don't know where the symbol is, so only allow base |
| registers which support displacements spanning the whole |
| address range. */ |
| switch (REGNO (reg)) |
| { |
| case A0_REGNO: |
| case A1_REGNO: |
| /* $sb needs a secondary reload, but since it's involved in |
| memory address reloads too, we don't deal with it very |
| well. */ |
| /* case SB_REGNO: */ |
| return 1; |
| default: |
| if (IS_PSEUDO (reg, strict)) |
| return 1; |
| return 0; |
| } |
| } |
| return 0; |
| } |
| |
| /* Implements REG_OK_FOR_BASE_P. */ |
| int |
| m32c_reg_ok_for_base_p (rtx x, int strict) |
| { |
| if (GET_CODE (x) != REG) |
| return 0; |
| switch (REGNO (x)) |
| { |
| case A0_REGNO: |
| case A1_REGNO: |
| case SB_REGNO: |
| case FB_REGNO: |
| case SP_REGNO: |
| return 1; |
| default: |
| if (IS_PSEUDO (x, strict)) |
| return 1; |
| return 0; |
| } |
| } |
| |
| /* We have three choices for choosing fb->aN offsets. If we choose -128, |
| we need one MOVA -128[fb],aN opcode and 16-bit aN displacements, |
| like this: |
| EB 4B FF mova -128[$fb],$a0 |
| D8 0C FF FF mov.w:Q #0,-1[$a0] |
| |
| Alternately, we subtract the frame size, and hopefully use 8-bit aN |
| displacements: |
| 7B F4 stc $fb,$a0 |
| 77 54 00 01 sub #256,$a0 |
| D8 08 01 mov.w:Q #0,1[$a0] |
| |
| If we don't offset (i.e. offset by zero), we end up with: |
| 7B F4 stc $fb,$a0 |
| D8 0C 00 FF mov.w:Q #0,-256[$a0] |
| |
| We have to subtract *something* so that we have a PLUS rtx to mark |
| that we've done this reload. The -128 offset will never result in |
| an 8-bit aN offset, and the payoff for the second case is five |
| loads *if* those loads are within 256 bytes of the other end of the |
| frame, so the third case seems best. Note that we subtract the |
| zero, but detect that in the addhi3 pattern. */ |
| |
| #define BIG_FB_ADJ 0 |
| |
| /* Implements LEGITIMIZE_ADDRESS. The only address we really have to |
| worry about is frame base offsets, as $fb has a limited |
| displacement range. We deal with this by attempting to reload $fb |
| itself into an address register; that seems to result in the best |
| code. */ |
| #undef TARGET_LEGITIMIZE_ADDRESS |
| #define TARGET_LEGITIMIZE_ADDRESS m32c_legitimize_address |
| static rtx |
| m32c_legitimize_address (rtx x, rtx oldx ATTRIBUTE_UNUSED, |
| enum machine_mode mode) |
| { |
| #if DEBUG0 |
| fprintf (stderr, "m32c_legitimize_address for mode %s\n", mode_name[mode]); |
| debug_rtx (x); |
| fprintf (stderr, "\n"); |
| #endif |
| |
| if (GET_CODE (x) == PLUS |
| && GET_CODE (XEXP (x, 0)) == REG |
| && REGNO (XEXP (x, 0)) == FB_REGNO |
| && GET_CODE (XEXP (x, 1)) == CONST_INT |
| && (INTVAL (XEXP (x, 1)) < -128 |
| || INTVAL (XEXP (x, 1)) > (128 - GET_MODE_SIZE (mode)))) |
| { |
| /* reload FB to A_REGS */ |
| rtx temp = gen_reg_rtx (Pmode); |
| x = copy_rtx (x); |
| emit_insn (gen_rtx_SET (VOIDmode, temp, XEXP (x, 0))); |
| XEXP (x, 0) = temp; |
| } |
| |
| return x; |
| } |
| |
| /* Implements LEGITIMIZE_RELOAD_ADDRESS. See comment above. */ |
| int |
| m32c_legitimize_reload_address (rtx * x, |
| enum machine_mode mode, |
| int opnum, |
| int type, int ind_levels ATTRIBUTE_UNUSED) |
| { |
| #if DEBUG0 |
| fprintf (stderr, "\nm32c_legitimize_reload_address for mode %s\n", |
| mode_name[mode]); |
| debug_rtx (*x); |
| #endif |
| |
| /* At one point, this function tried to get $fb copied to an address |
| register, which in theory would maximize sharing, but gcc was |
| *also* still trying to reload the whole address, and we'd run out |
| of address registers. So we let gcc do the naive (but safe) |
| reload instead, when the above function doesn't handle it for |
| us. |
| |
| The code below is a second attempt at the above. */ |
| |
| if (GET_CODE (*x) == PLUS |
| && GET_CODE (XEXP (*x, 0)) == REG |
| && REGNO (XEXP (*x, 0)) == FB_REGNO |
| && GET_CODE (XEXP (*x, 1)) == CONST_INT |
| && (INTVAL (XEXP (*x, 1)) < -128 |
| || INTVAL (XEXP (*x, 1)) > (128 - GET_MODE_SIZE (mode)))) |
| { |
| rtx sum; |
| int offset = INTVAL (XEXP (*x, 1)); |
| int adjustment = -BIG_FB_ADJ; |
| |
| sum = gen_rtx_PLUS (Pmode, XEXP (*x, 0), |
| GEN_INT (adjustment)); |
| *x = gen_rtx_PLUS (Pmode, sum, GEN_INT (offset - adjustment)); |
| if (type == RELOAD_OTHER) |
| type = RELOAD_FOR_OTHER_ADDRESS; |
| push_reload (sum, NULL_RTX, &XEXP (*x, 0), NULL, |
| A_REGS, Pmode, VOIDmode, 0, 0, opnum, |
| (enum reload_type) type); |
| return 1; |
| } |
| |
| if (GET_CODE (*x) == PLUS |
| && GET_CODE (XEXP (*x, 0)) == PLUS |
| && GET_CODE (XEXP (XEXP (*x, 0), 0)) == REG |
| && REGNO (XEXP (XEXP (*x, 0), 0)) == FB_REGNO |
| && GET_CODE (XEXP (XEXP (*x, 0), 1)) == CONST_INT |
| && GET_CODE (XEXP (*x, 1)) == CONST_INT |
| ) |
| { |
| if (type == RELOAD_OTHER) |
| type = RELOAD_FOR_OTHER_ADDRESS; |
| push_reload (XEXP (*x, 0), NULL_RTX, &XEXP (*x, 0), NULL, |
| A_REGS, Pmode, VOIDmode, 0, 0, opnum, |
| (enum reload_type) type); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /* Return the appropriate mode for a named address pointer. */ |
| #undef TARGET_ADDR_SPACE_POINTER_MODE |
| #define TARGET_ADDR_SPACE_POINTER_MODE m32c_addr_space_pointer_mode |
| static enum machine_mode |
| m32c_addr_space_pointer_mode (addr_space_t addrspace) |
| { |
| switch (addrspace) |
| { |
| case ADDR_SPACE_GENERIC: |
| return TARGET_A24 ? PSImode : HImode; |
| case ADDR_SPACE_FAR: |
| return SImode; |
| default: |
| gcc_unreachable (); |
| } |
| } |
| |
| /* Return the appropriate mode for a named address address. */ |
| #undef TARGET_ADDR_SPACE_ADDRESS_MODE |
| #define TARGET_ADDR_SPACE_ADDRESS_MODE m32c_addr_space_address_mode |
| static enum machine_mode |
| m32c_addr_space_address_mode (addr_space_t addrspace) |
| { |
| switch (addrspace) |
| { |
| case ADDR_SPACE_GENERIC: |
| return TARGET_A24 ? PSImode : HImode; |
| case ADDR_SPACE_FAR: |
| return SImode; |
| default: |
| gcc_unreachable (); |
| } |
| } |
| |
| /* Like m32c_legitimate_address_p, except with named addresses. */ |
| #undef TARGET_ADDR_SPACE_LEGITIMATE_ADDRESS_P |
| #define TARGET_ADDR_SPACE_LEGITIMATE_ADDRESS_P \ |
| m32c_addr_space_legitimate_address_p |
| static bool |
| m32c_addr_space_legitimate_address_p (enum machine_mode mode, rtx x, |
| bool strict, addr_space_t as) |
| { |
| if (as == ADDR_SPACE_FAR) |
| { |
| if (TARGET_A24) |
| return 0; |
| encode_pattern (x); |
| if (RTX_IS ("r")) |
| { |
| if (GET_MODE (x) != SImode) |
| return 0; |
| switch (REGNO (patternr[0])) |
| { |
| case A0_REGNO: |
| return 1; |
| |
| default: |
| if (IS_PSEUDO (patternr[0], strict)) |
| return 1; |
| return 0; |
| } |
| } |
| if (RTX_IS ("+^Sri")) |
| { |
| int rn = REGNO (patternr[3]); |
| HOST_WIDE_INT offs = INTVAL (patternr[4]); |
| if (GET_MODE (patternr[3]) != HImode) |
| return 0; |
| switch (rn) |
| { |
| case A0_REGNO: |
| return (offs >= 0 && offs <= 0xfffff); |
| |
| default: |
| if (IS_PSEUDO (patternr[3], strict)) |
| return 1; |
| return 0; |
| } |
| } |
| if (RTX_IS ("+^Srs")) |
| { |
| int rn = REGNO (patternr[3]); |
| if (GET_MODE (patternr[3]) != HImode) |
| return 0; |
| switch (rn) |
| { |
| case A0_REGNO: |
| return 1; |
| |
| default: |
| if (IS_PSEUDO (patternr[3], strict)) |
| return 1; |
| return 0; |
| } |
| } |
| if (RTX_IS ("+^S+ris")) |
| { |
| int rn = REGNO (patternr[4]); |
| if (GET_MODE (patternr[4]) != HImode) |
| return 0; |
| switch (rn) |
| { |
| case A0_REGNO: |
| return 1; |
| |
| default: |
| if (IS_PSEUDO (patternr[4], strict)) |
| return 1; |
| return 0; |
| } |
| } |
| if (RTX_IS ("s")) |
| { |
| return 1; |
| } |
| return 0; |
| } |
| |
| else if (as != ADDR_SPACE_GENERIC) |
| gcc_unreachable (); |
| |
| return m32c_legitimate_address_p (mode, x, strict); |
| } |
| |
| /* Like m32c_legitimate_address, except with named address support. */ |
| #undef TARGET_ADDR_SPACE_LEGITIMIZE_ADDRESS |
| #define TARGET_ADDR_SPACE_LEGITIMIZE_ADDRESS m32c_addr_space_legitimize_address |
| static rtx |
| m32c_addr_space_legitimize_address (rtx x, rtx oldx, enum machine_mode mode, |
| addr_space_t as) |
| { |
| if (as != ADDR_SPACE_GENERIC) |
| { |
| #if DEBUG0 |
| fprintf (stderr, "\033[36mm32c_addr_space_legitimize_address for mode %s\033[0m\n", mode_name[mode]); |
| debug_rtx (x); |
| fprintf (stderr, "\n"); |
| #endif |
| |
| if (GET_CODE (x) != REG) |
| { |
| x = force_reg (SImode, x); |
| } |
| return x; |
| } |
| |
| return m32c_legitimize_address (x, oldx, mode); |
| } |
| |
| /* Determine if one named address space is a subset of another. */ |
| #undef TARGET_ADDR_SPACE_SUBSET_P |
| #define TARGET_ADDR_SPACE_SUBSET_P m32c_addr_space_subset_p |
| static bool |
| m32c_addr_space_subset_p (addr_space_t subset, addr_space_t superset) |
| { |
| gcc_assert (subset == ADDR_SPACE_GENERIC || subset == ADDR_SPACE_FAR); |
| gcc_assert (superset == ADDR_SPACE_GENERIC || superset == ADDR_SPACE_FAR); |
| |
| if (subset == superset) |
| return true; |
| |
| else |
| return (subset == ADDR_SPACE_GENERIC && superset == ADDR_SPACE_FAR); |
| } |
| |
| #undef TARGET_ADDR_SPACE_CONVERT |
| #define TARGET_ADDR_SPACE_CONVERT m32c_addr_space_convert |
| /* Convert from one address space to another. */ |
| static rtx |
| m32c_addr_space_convert (rtx op, tree from_type, tree to_type) |
| { |
| addr_space_t from_as = TYPE_ADDR_SPACE (TREE_TYPE (from_type)); |
| addr_space_t to_as = TYPE_ADDR_SPACE (TREE_TYPE (to_type)); |
| rtx result; |
| |
| gcc_assert (from_as == ADDR_SPACE_GENERIC || from_as == ADDR_SPACE_FAR); |
| gcc_assert (to_as == ADDR_SPACE_GENERIC || to_as == ADDR_SPACE_FAR); |
| |
| if (to_as == ADDR_SPACE_GENERIC && from_as == ADDR_SPACE_FAR) |
| { |
| /* This is unpredictable, as we're truncating off usable address |
| bits. */ |
| |
| result = gen_reg_rtx (HImode); |
| emit_move_insn (result, simplify_subreg (HImode, op, SImode, 0)); |
| return result; |
| } |
| else if (to_as == ADDR_SPACE_FAR && from_as == ADDR_SPACE_GENERIC) |
| { |
| /* This always works. */ |
| result = gen_reg_rtx (SImode); |
| emit_insn (gen_zero_extendhisi2 (result, op)); |
| return result; |
| } |
| else |
| gcc_unreachable (); |
| } |
| |
| /* Condition Code Status */ |
| |
| #undef TARGET_FIXED_CONDITION_CODE_REGS |
| #define TARGET_FIXED_CONDITION_CODE_REGS m32c_fixed_condition_code_regs |
| static bool |
| m32c_fixed_condition_code_regs (unsigned int *p1, unsigned int *p2) |
| { |
| *p1 = FLG_REGNO; |
| *p2 = INVALID_REGNUM; |
| return true; |
| } |
| |
| /* Describing Relative Costs of Operations */ |
| |
| /* Implements TARGET_REGISTER_MOVE_COST. We make impossible moves |
| prohibitively expensive, like trying to put QIs in r2/r3 (there are |
| no opcodes to do that). We also discourage use of mem* registers |
| since they're really memory. */ |
| |
| #undef TARGET_REGISTER_MOVE_COST |
| #define TARGET_REGISTER_MOVE_COST m32c_register_move_cost |
| |
| static int |
| m32c_register_move_cost (enum machine_mode mode, reg_class_t from, |
| reg_class_t to) |
| { |
| int cost = COSTS_N_INSNS (3); |
| HARD_REG_SET cc; |
| |
| /* FIXME: pick real values, but not 2 for now. */ |
| COPY_HARD_REG_SET (cc, reg_class_contents[(int) from]); |
| IOR_HARD_REG_SET (cc, reg_class_contents[(int) to]); |
| |
| if (mode == QImode |
| && hard_reg_set_intersect_p (cc, reg_class_contents[R23_REGS])) |
| { |
| if (hard_reg_set_subset_p (cc, reg_class_contents[R23_REGS])) |
| cost = COSTS_N_INSNS (1000); |
| else |
| cost = COSTS_N_INSNS (80); |
| } |
| |
| if (!class_can_hold_mode (from, mode) || !class_can_hold_mode (to, mode)) |
| cost = COSTS_N_INSNS (1000); |
| |
| if (reg_classes_intersect_p (from, CR_REGS)) |
| cost += COSTS_N_INSNS (5); |
| |
| if (reg_classes_intersect_p (to, CR_REGS)) |
| cost += COSTS_N_INSNS (5); |
| |
| if (from == MEM_REGS || to == MEM_REGS) |
| cost += COSTS_N_INSNS (50); |
| else if (reg_classes_intersect_p (from, MEM_REGS) |
| || reg_classes_intersect_p (to, MEM_REGS)) |
| cost += COSTS_N_INSNS (10); |
| |
| #if DEBUG0 |
| fprintf (stderr, "register_move_cost %s from %s to %s = %d\n", |
| mode_name[mode], class_names[(int) from], class_names[(int) to], |
| cost); |
| #endif |
| return cost; |
| } |
| |
| /* Implements TARGET_MEMORY_MOVE_COST. */ |
| |
| #undef TARGET_MEMORY_MOVE_COST |
| #define TARGET_MEMORY_MOVE_COST m32c_memory_move_cost |
| |
| static int |
| m32c_memory_move_cost (enum machine_mode mode ATTRIBUTE_UNUSED, |
| reg_class_t rclass ATTRIBUTE_UNUSED, |
| bool in ATTRIBUTE_UNUSED) |
| { |
| /* FIXME: pick real values. */ |
| return COSTS_N_INSNS (10); |
| } |
| |
| /* Here we try to describe when we use multiple opcodes for one RTX so |
| that gcc knows when to use them. */ |
| #undef TARGET_RTX_COSTS |
| #define TARGET_RTX_COSTS m32c_rtx_costs |
| static bool |
| m32c_rtx_costs (rtx x, int code, int outer_code, int opno ATTRIBUTE_UNUSED, |
| int *total, bool speed ATTRIBUTE_UNUSED) |
| { |
| switch (code) |
| { |
| case REG: |
| if (REGNO (x) >= MEM0_REGNO && REGNO (x) <= MEM7_REGNO) |
| *total += COSTS_N_INSNS (500); |
| else |
| *total += COSTS_N_INSNS (1); |
| return true; |
| |
| case ASHIFT: |
| case LSHIFTRT: |
| case ASHIFTRT: |
| if (GET_CODE (XEXP (x, 1)) != CONST_INT) |
| { |
| /* mov.b r1l, r1h */ |
| *total += COSTS_N_INSNS (1); |
| return true; |
| } |
| if (INTVAL (XEXP (x, 1)) > 8 |
| || INTVAL (XEXP (x, 1)) < -8) |
| { |
| /* mov.b #N, r1l */ |
| /* mov.b r1l, r1h */ |
| *total += COSTS_N_INSNS (2); |
| return true; |
| } |
| return true; |
| |
| case LE: |
| case LEU: |
| case LT: |
| case LTU: |
| case GT: |
| case GTU: |
| case GE: |
| case GEU: |
| case NE: |
| case EQ: |
| if (outer_code == SET) |
| { |
| *total += COSTS_N_INSNS (2); |
| return true; |
| } |
| break; |
| |
| case ZERO_EXTRACT: |
| { |
| rtx dest = XEXP (x, 0); |
| rtx addr = XEXP (dest, 0); |
| switch (GET_CODE (addr)) |
| { |
| case CONST_INT: |
| *total += COSTS_N_INSNS (1); |
| break; |
| case SYMBOL_REF: |
| *total += COSTS_N_INSNS (3); |
| break; |
| default: |
| *total += COSTS_N_INSNS (2); |
| break; |
| } |
| return true; |
| } |
| break; |
| |
| default: |
| /* Reasonable default. */ |
| if (TARGET_A16 && GET_MODE(x) == SImode) |
| *total += COSTS_N_INSNS (2); |
| break; |
| } |
| return false; |
| } |
| |
| #undef TARGET_ADDRESS_COST |
| #define TARGET_ADDRESS_COST m32c_address_cost |
| static int |
| m32c_address_cost (rtx addr, bool speed ATTRIBUTE_UNUSED) |
| { |
| int i; |
| /* fprintf(stderr, "\naddress_cost\n"); |
| debug_rtx(addr);*/ |
| switch (GET_CODE (addr)) |
| { |
| case CONST_INT: |
| i = INTVAL (addr); |
| if (i == 0) |
| return COSTS_N_INSNS(1); |
| if (0 < i && i <= 255) |
| return COSTS_N_INSNS(2); |
| if (0 < i && i <= 65535) |
| return COSTS_N_INSNS(3); |
| return COSTS_N_INSNS(4); |
| case SYMBOL_REF: |
| return COSTS_N_INSNS(4); |
| case REG: |
| return COSTS_N_INSNS(1); |
| case PLUS: |
| if (GET_CODE (XEXP (addr, 1)) == CONST_INT) |
| { |
| i = INTVAL (XEXP (addr, 1)); |
| if (i == 0) |
| return COSTS_N_INSNS(1); |
| if (0 < i && i <= 255) |
| return COSTS_N_INSNS(2); |
| if (0 < i && i <= 65535) |
| return COSTS_N_INSNS(3); |
| } |
| return COSTS_N_INSNS(4); |
| default: |
| return 0; |
| } |
| } |
| |
| /* Defining the Output Assembler Language */ |
| |
| /* Output of Data */ |
| |
| /* We may have 24 bit sizes, which is the native address size. |
| Currently unused, but provided for completeness. */ |
| #undef TARGET_ASM_INTEGER |
| #define TARGET_ASM_INTEGER m32c_asm_integer |
| static bool |
| m32c_asm_integer (rtx x, unsigned int size, int aligned_p) |
| { |
| switch (size) |
| { |
| case 3: |
| fprintf (asm_out_file, "\t.3byte\t"); |
| output_addr_const (asm_out_file, x); |
| fputc ('\n', asm_out_file); |
| return true; |
| case 4: |
| if (GET_CODE (x) == SYMBOL_REF) |
| { |
| fprintf (asm_out_file, "\t.long\t"); |
| output_addr_const (asm_out_file, x); |
| fputc ('\n', asm_out_file); |
| return true; |
| } |
| break; |
| } |
| return default_assemble_integer (x, size, aligned_p); |
| } |
| |
| /* Output of Assembler Instructions */ |
| |
| /* We use a lookup table because the addressing modes are non-orthogonal. */ |
| |
| static struct |
| { |
| char code; |
| char const *pattern; |
| char const *format; |
| } |
| const conversions[] = { |
| { 0, "r", "0" }, |
| |
| { 0, "mr", "z[1]" }, |
| { 0, "m+ri", "3[2]" }, |
| { 0, "m+rs", "3[2]" }, |
| { 0, "m+^Zrs", "5[4]" }, |
| { 0, "m+^Zri", "5[4]" }, |
| { 0, "m+^Z+ris", "7+6[5]" }, |
| { 0, "m+^Srs", "5[4]" }, |
| { 0, "m+^Sri", "5[4]" }, |
| { 0, "m+^S+ris", "7+6[5]" }, |
| { 0, "m+r+si", "4+5[2]" }, |
| { 0, "ms", "1" }, |
| { 0, "mi", "1" }, |
| { 0, "m+si", "2+3" }, |
| |
| { 0, "mmr", "[z[2]]" }, |
| { 0, "mm+ri", "[4[3]]" }, |
| { 0, "mm+rs", "[4[3]]" }, |
| { 0, "mm+r+si", "[5+6[3]]" }, |
| { 0, "mms", "[[2]]" }, |
| { 0, "mmi", "[[2]]" }, |
| { 0, "mm+si", "[4[3]]" }, |
| |
| { 0, "i", "#0" }, |
| { 0, "s", "#0" }, |
| { 0, "+si", "#1+2" }, |
| { 0, "l", "#0" }, |
| |
| { 'l', "l", "0" }, |
| { 'd', "i", "0" }, |
| { 'd', "s", "0" }, |
| { 'd', "+si", "1+2" }, |
| { 'D', "i", "0" }, |
| { 'D', "s", "0" }, |
| { 'D', "+si", "1+2" }, |
| { 'x', "i", "#0" }, |
| { 'X', "i", "#0" }, |
| { 'm', "i", "#0" }, |
| { 'b', "i", "#0" }, |
| { 'B', "i", "0" }, |
| { 'p', "i", "0" }, |
| |
| { 0, 0, 0 } |
| }; |
| |
| /* This is in order according to the bitfield that pushm/popm use. */ |
| static char const *pushm_regs[] = { |
| "fb", "sb", "a1", "a0", "r3", "r2", "r1", "r0" |
| }; |
| |
| /* Implements TARGET_PRINT_OPERAND. */ |
| |
| #undef TARGET_PRINT_OPERAND |
| #define TARGET_PRINT_OPERAND m32c_print_operand |
| |
| static void |
| m32c_print_operand (FILE * file, rtx x, int code) |
| { |
| int i, j, b; |
| const char *comma; |
| HOST_WIDE_INT ival; |
| int unsigned_const = 0; |
| int force_sign; |
| |
| /* Multiplies; constants are converted to sign-extended format but |
| we need unsigned, so 'u' and 'U' tell us what size unsigned we |
| need. */ |
| if (code == 'u') |
| { |
| unsigned_const = 2; |
| code = 0; |
| } |
| if (code == 'U') |
| { |
| unsigned_const = 1; |
| code = 0; |
| } |
| /* This one is only for debugging; you can put it in a pattern to |
| force this error. */ |
| if (code == '!') |
| { |
| fprintf (stderr, "dj: unreviewed pattern:"); |
| if (current_output_insn) |
| debug_rtx (current_output_insn); |
| gcc_unreachable (); |
| } |
| /* PSImode operations are either .w or .l depending on the target. */ |
| if (code == '&') |
| { |
| if (TARGET_A16) |
| fprintf (file, "w"); |
| else |
| fprintf (file, "l"); |
| return; |
| } |
| /* Inverted conditionals. */ |
| if (code == 'C') |
| { |
| switch (GET_CODE (x)) |
| { |
| case LE: |
| fputs ("gt", file); |
| break; |
| case LEU: |
| fputs ("gtu", file); |
| break; |
| case LT: |
| fputs ("ge", file); |
| break; |
| case LTU: |
| fputs ("geu", file); |
| break; |
| case GT: |
| fputs ("le", file); |
| break; |
| case GTU: |
| fputs ("leu", file); |
| break; |
| case GE: |
| fputs ("lt", file); |
| break; |
| case GEU: |
| fputs ("ltu", file); |
| break; |
| case NE: |
| fputs ("eq", file); |
| break; |
| case EQ: |
| fputs ("ne", file); |
| break; |
| default: |
| gcc_unreachable (); |
| } |
| return; |
| } |
| /* Regular conditionals. */ |
| if (code == 'c') |
| { |
| switch (GET_CODE (x)) |
| { |
| case LE: |
| fputs ("le", file); |
| break; |
| case LEU: |
| fputs ("leu", file); |
| break; |
| case LT: |
| fputs ("lt", file); |
| break; |
| case LTU: |
| fputs ("ltu", file); |
| break; |
| case GT: |
| fputs ("gt", file); |
| break; |
| case GTU: |
| fputs ("gtu", file); |
| break; |
| case GE: |
| fputs ("ge", file); |
| break; |
| case GEU: |
| fputs ("geu", file); |
| break; |
| case NE: |
| fputs ("ne", file); |
| break; |
| case EQ: |
| fputs ("eq", file); |
| break; |
| default: |
| gcc_unreachable (); |
| } |
| return; |
| } |
| /* Used in negsi2 to do HImode ops on the two parts of an SImode |
| operand. */ |
| if (code == 'h' && GET_MODE (x) == SImode) |
| { |
| x = m32c_subreg (HImode, x, SImode, 0); |
| code = 0; |
| } |
| if (code == 'H' && GET_MODE (x) == SImode) |
| { |
| x = m32c_subreg (HImode, x, SImode, 2); |
| code = 0; |
| } |
| if (code == 'h' && GET_MODE (x) == HImode) |
| { |
| x = m32c_subreg (QImode, x, HImode, 0); |
| code = 0; |
| } |
| if (code == 'H' && GET_MODE (x) == HImode) |
| { |
| /* We can't actually represent this as an rtx. Do it here. */ |
| if (GET_CODE (x) == REG) |
| { |
| switch (REGNO (x)) |
| { |
| case R0_REGNO: |
| fputs ("r0h", file); |
| return; |
| case R1_REGNO: |
| fputs ("r1h", file); |
| return; |
| default: |
| gcc_unreachable(); |
| } |
| } |
| /* This should be a MEM. */ |
| x = m32c_subreg (QImode, x, HImode, 1); |
| code = 0; |
| } |
| /* This is for BMcond, which always wants word register names. */ |
| if (code == 'h' && GET_MODE (x) == QImode) |
| { |
| if (GET_CODE (x) == REG) |
| x = gen_rtx_REG (HImode, REGNO (x)); |
| code = 0; |
| } |
| /* 'x' and 'X' need to be ignored for non-immediates. */ |
| if ((code == 'x' || code == 'X') && GET_CODE (x) != CONST_INT) |
| code = 0; |
| |
| encode_pattern (x); |
| force_sign = 0; |
| for (i = 0; conversions[i].pattern; i++) |
| if (conversions[i].code == code |
| && streq (conversions[i].pattern, pattern)) |
| { |
| for (j = 0; conversions[i].format[j]; j++) |
| /* backslash quotes the next character in the output pattern. */ |
| if (conversions[i].format[j] == '\\') |
| { |
| fputc (conversions[i].format[j + 1], file); |
| j++; |
| } |
| /* Digits in the output pattern indicate that the |
| corresponding RTX is to be output at that point. */ |
| else if (ISDIGIT (conversions[i].format[j])) |
| { |
| rtx r = patternr[conversions[i].format[j] - '0']; |
| switch (GET_CODE (r)) |
| { |
| case REG: |
| fprintf (file, "%s", |
| reg_name_with_mode (REGNO (r), GET_MODE (r))); |
| break; |
| case CONST_INT: |
| switch (code) |
| { |
| case 'b': |
| case 'B': |
| { |
| int v = INTVAL (r); |
| int i = (int) exact_log2 (v); |
| if (i == -1) |
| i = (int) exact_log2 ((v ^ 0xffff) & 0xffff); |
| if (i == -1) |
| i = (int) exact_log2 ((v ^ 0xff) & 0xff); |
| /* Bit position. */ |
| fprintf (file, "%d", i); |
| } |
| break; |
| case 'x': |
| /* Unsigned byte. */ |
| fprintf (file, HOST_WIDE_INT_PRINT_HEX, |
| INTVAL (r) & 0xff); |
| break; |
| case 'X': |
| /* Unsigned word. */ |
| fprintf (file, HOST_WIDE_INT_PRINT_HEX, |
| INTVAL (r) & 0xffff); |
| break; |
| case 'p': |
| /* pushm and popm encode a register set into a single byte. */ |
| comma = ""; |
| for (b = 7; b >= 0; b--) |
| if (INTVAL (r) & (1 << b)) |
| { |
| fprintf (file, "%s%s", comma, pushm_regs[b]); |
| comma = ","; |
| } |
| break; |
| case 'm': |
| /* "Minus". Output -X */ |
| ival = (-INTVAL (r) & 0xffff); |
| if (ival & 0x8000) |
| ival = ival - 0x10000; |
| fprintf (file, HOST_WIDE_INT_PRINT_DEC, ival); |
| break; |
| default: |
| ival = INTVAL (r); |
| if (conversions[i].format[j + 1] == '[' && ival < 0) |
| { |
| /* We can simulate negative displacements by |
| taking advantage of address space |
| wrapping when the offset can span the |
| entire address range. */ |
| rtx base = |
| patternr[conversions[i].format[j + 2] - '0']; |
| if (GET_CODE (base) == REG) |
| switch (REGNO (base)) |
| { |
| case A0_REGNO: |
| case A1_REGNO: |
| if (TARGET_A24) |
| ival = 0x1000000 + ival; |
| else |
| ival = 0x10000 + ival; |
| break; |
| case SB_REGNO: |
| if (TARGET_A16) |
| ival = 0x10000 + ival; |
| break; |
| } |
| } |
| else if (code == 'd' && ival < 0 && j == 0) |
| /* The "mova" opcode is used to do addition by |
| computing displacements, but again, we need |
| displacements to be unsigned *if* they're |
| the only component of the displacement |
| (i.e. no "symbol-4" type displacement). */ |
| ival = (TARGET_A24 ? 0x1000000 : 0x10000) + ival; |
| |
| if (conversions[i].format[j] == '0') |
| { |
| /* More conversions to unsigned. */ |
| if (unsigned_const == 2) |
| ival &= 0xffff; |
| if (unsigned_const == 1) |
| ival &= 0xff; |
| } |
| if (streq (conversions[i].pattern, "mi") |
| || streq (conversions[i].pattern, "mmi")) |
| { |
| /* Integers used as addresses are unsigned. */ |
| ival &= (TARGET_A24 ? 0xffffff : 0xffff); |
| } |
| if (force_sign && ival >= 0) |
| fputc ('+', file); |
| fprintf (file, HOST_WIDE_INT_PRINT_DEC, ival); |
| break; |
| } |
| break; |
| case CONST_DOUBLE: |
| /* We don't have const_double constants. If it |
| happens, make it obvious. */ |
| fprintf (file, "[const_double 0x%lx]", |
| (unsigned long) CONST_DOUBLE_HIGH (r)); |
| break; |
| case SYMBOL_REF: |
| assemble_name (file, XSTR (r, 0)); |
| break; |
| case LABEL_REF: |
| output_asm_label (r); |
| break; |
| default: |
| fprintf (stderr, "don't know how to print this operand:"); |
| debug_rtx (r); |
| gcc_unreachable (); |
| } |
| } |
| else |
| { |
| if (conversions[i].format[j] == 'z') |
| { |
| /* Some addressing modes *must* have a displacement, |
| so insert a zero here if needed. */ |
| int k; |
| for (k = j + 1; conversions[i].format[k]; k++) |
| if (ISDIGIT (conversions[i].format[k])) |
| { |
| rtx reg = patternr[conversions[i].format[k] - '0']; |
| if (GET_CODE (reg) == REG |
| && (REGNO (reg) == SB_REGNO |
| || REGNO (reg) == FB_REGNO |
| || REGNO (reg) == SP_REGNO)) |
| fputc ('0', file); |
| } |
| continue; |
| } |
| /* Signed displacements off symbols need to have signs |
| blended cleanly. */ |
| if (conversions[i].format[j] == '+' |
| && (!code || code == 'D' || code == 'd') |
| && ISDIGIT (conversions[i].format[j + 1]) |
| && (GET_CODE (patternr[conversions[i].format[j + 1] - '0']) |
| == CONST_INT)) |
| { |
| force_sign = 1; |
| continue; |
| } |
| fputc (conversions[i].format[j], file); |
| } |
| break; |
| } |
| if (!conversions[i].pattern) |
| { |
| fprintf (stderr, "unconvertible operand %c `%s'", code ? code : '-', |
| pattern); |
| debug_rtx (x); |
| fprintf (file, "[%c.%s]", code ? code : '-', pattern); |
| } |
| |
| return; |
| } |
| |
| /* Implements TARGET_PRINT_OPERAND_PUNCT_VALID_P. |
| |
| See m32c_print_operand above for descriptions of what these do. */ |
| |
| #undef TARGET_PRINT_OPERAND_PUNCT_VALID_P |
| #define TARGET_PRINT_OPERAND_PUNCT_VALID_P m32c_print_operand_punct_valid_p |
| |
| static bool |
| m32c_print_operand_punct_valid_p (unsigned char c) |
| { |
| if (c == '&' || c == '!') |
| return true; |
| |
| return false; |
| } |
| |
| /* Implements TARGET_PRINT_OPERAND_ADDRESS. Nothing unusual here. */ |
| |
| #undef TARGET_PRINT_OPERAND_ADDRESS |
| #define TARGET_PRINT_OPERAND_ADDRESS m32c_print_operand_address |
| |
| static void |
| m32c_print_operand_address (FILE * stream, rtx address) |
| { |
| if (GET_CODE (address) == MEM) |
| address = XEXP (address, 0); |
| else |
| /* cf: gcc.dg/asm-4.c. */ |
| gcc_assert (GET_CODE (address) == REG); |
| |
| m32c_print_operand (stream, address, 0); |
| } |
| |
| /* Implements ASM_OUTPUT_REG_PUSH. Control registers are pushed |
| differently than general registers. */ |
| void |
| m32c_output_reg_push (FILE * s, int regno) |
| { |
| if (regno == FLG_REGNO) |
| fprintf (s, "\tpushc\tflg\n"); |
| else |
| fprintf (s, "\tpush.%c\t%s\n", |
| " bwll"[reg_push_size (regno)], reg_names[regno]); |
| } |
| |
| /* Likewise for ASM_OUTPUT_REG_POP. */ |
| void |
| m32c_output_reg_pop (FILE * s, int regno) |
| { |
| if (regno == FLG_REGNO) |
| fprintf (s, "\tpopc\tflg\n"); |
| else |
| fprintf (s, "\tpop.%c\t%s\n", |
| " bwll"[reg_push_size (regno)], reg_names[regno]); |
| } |
| |
| /* Defining target-specific uses of `__attribute__' */ |
| |
| /* Used to simplify the logic below. Find the attributes wherever |
| they may be. */ |
| #define M32C_ATTRIBUTES(decl) \ |
| (TYPE_P (decl)) ? TYPE_ATTRIBUTES (decl) \ |
| : DECL_ATTRIBUTES (decl) \ |
| ? (DECL_ATTRIBUTES (decl)) \ |
| : TYPE_ATTRIBUTES (TREE_TYPE (decl)) |
| |
| /* Returns TRUE if the given tree has the "interrupt" attribute. */ |
| static int |
| interrupt_p (tree node ATTRIBUTE_UNUSED) |
| { |
| tree list = M32C_ATTRIBUTES (node); |
| while (list) |
| { |
| if (is_attribute_p ("interrupt", TREE_PURPOSE (list))) |
| return 1; |
| list = TREE_CHAIN (list); |
| } |
| return fast_interrupt_p (node); |
| } |
| |
| /* Returns TRUE if the given tree has the "bank_switch" attribute. */ |
| static int |
| bank_switch_p (tree node ATTRIBUTE_UNUSED) |
| { |
| tree list = M32C_ATTRIBUTES (node); |
| while (list) |
| { |
| if (is_attribute_p ("bank_switch", TREE_PURPOSE (list))) |
| return 1; |
| list = TREE_CHAIN (list); |
| } |
| return 0; |
| } |
| |
| /* Returns TRUE if the given tree has the "fast_interrupt" attribute. */ |
| static int |
| fast_interrupt_p (tree node ATTRIBUTE_UNUSED) |
| { |
| tree list = M32C_ATTRIBUTES (node); |
| while (list) |
| { |
| if (is_attribute_p ("fast_interrupt", TREE_PURPOSE (list))) |
| return 1; |
| list = TREE_CHAIN (list); |
| } |
| return 0; |
| } |
| |
| static tree |
| interrupt_handler (tree * node ATTRIBUTE_UNUSED, |
| tree name ATTRIBUTE_UNUSED, |
| tree args ATTRIBUTE_UNUSED, |
| int flags ATTRIBUTE_UNUSED, |
| bool * no_add_attrs ATTRIBUTE_UNUSED) |
| { |
| return NULL_TREE; |
| } |
| |
| /* Returns TRUE if given tree has the "function_vector" attribute. */ |
| int |
| m32c_special_page_vector_p (tree func) |
| { |
| tree list; |
| |
| if (TREE_CODE (func) != FUNCTION_DECL) |
| return 0; |
| |
| list = M32C_ATTRIBUTES (func); |
| while (list) |
| { |
| if (is_attribute_p ("function_vector", TREE_PURPOSE (list))) |
| return 1; |
| list = TREE_CHAIN (list); |
| } |
| return 0; |
| } |
| |
| static tree |
| function_vector_handler (tree * node ATTRIBUTE_UNUSED, |
| tree name ATTRIBUTE_UNUSED, |
| tree args ATTRIBUTE_UNUSED, |
| int flags ATTRIBUTE_UNUSED, |
| bool * no_add_attrs ATTRIBUTE_UNUSED) |
| { |
| if (TARGET_R8C) |
| { |
| /* The attribute is not supported for R8C target. */ |
| warning (OPT_Wattributes, |
| "%qE attribute is not supported for R8C target", |
| name); |
| *no_add_attrs = true; |
| } |
| else if (TREE_CODE (*node) != FUNCTION_DECL) |
| { |
| /* The attribute must be applied to functions only. */ |
| warning (OPT_Wattributes, |
| "%qE attribute applies only to functions", |
| name); |
| *no_add_attrs = true; |
| } |
| else if (TREE_CODE (TREE_VALUE (args)) != INTEGER_CST) |
| { |
| /* The argument must be a constant integer. */ |
| warning (OPT_Wattributes, |
| "%qE attribute argument not an integer constant", |
| name); |
| *no_add_attrs = true; |
| } |
| else if (TREE_INT_CST_LOW (TREE_VALUE (args)) < 18 |
| || TREE_INT_CST_LOW (TREE_VALUE (args)) > 255) |
| { |
| /* The argument value must be between 18 to 255. */ |
| warning (OPT_Wattributes, |
| "%qE attribute argument should be between 18 to 255", |
| name); |
| *no_add_attrs = true; |
| } |
| return NULL_TREE; |
| } |
| |
| /* If the function is assigned the attribute 'function_vector', it |
| returns the function vector number, otherwise returns zero. */ |
| int |
| current_function_special_page_vector (rtx x) |
| { |
| int num; |
| |
| if ((GET_CODE(x) == SYMBOL_REF) |
| && (SYMBOL_REF_FLAGS (x) & SYMBOL_FLAG_FUNCVEC_FUNCTION)) |
| { |
| tree list; |
| tree t = SYMBOL_REF_DECL (x); |
| |
| if (TREE_CODE (t) != FUNCTION_DECL) |
| return 0; |
| |
| list = M32C_ATTRIBUTES (t); |
| while (list) |
| { |
| if (is_attribute_p ("function_vector", TREE_PURPOSE (list))) |
| { |
| num = TREE_INT_CST_LOW (TREE_VALUE (TREE_VALUE (list))); |
| return num; |
| } |
| |
| list = TREE_CHAIN (list); |
| } |
| |
| return 0; |
| } |
| else |
| return 0; |
| } |
| |
| #undef TARGET_ATTRIBUTE_TABLE |
| #define TARGET_ATTRIBUTE_TABLE m32c_attribute_table |
| static const struct attribute_spec m32c_attribute_table[] = { |
| {"interrupt", 0, 0, false, false, false, interrupt_handler, false}, |
| {"bank_switch", 0, 0, false, false, false, interrupt_handler, false}, |
| {"fast_interrupt", 0, 0, false, false, false, interrupt_handler, false}, |
| {"function_vector", 1, 1, true, false, false, function_vector_handler, |
| false}, |
| {0, 0, 0, 0, 0, 0, 0, false} |
| }; |
| |
| #undef TARGET_COMP_TYPE_ATTRIBUTES |
| #define TARGET_COMP_TYPE_ATTRIBUTES m32c_comp_type_attributes |
| static int |
| m32c_comp_type_attributes (const_tree type1 ATTRIBUTE_UNUSED, |
| const_tree type2 ATTRIBUTE_UNUSED) |
| { |
| /* 0=incompatible 1=compatible 2=warning */ |
| return 1; |
| } |
| |
| #undef TARGET_INSERT_ATTRIBUTES |
| #define TARGET_INSERT_ATTRIBUTES m32c_insert_attributes |
| static void |
| m32c_insert_attributes (tree node ATTRIBUTE_UNUSED, |
| tree * attr_ptr ATTRIBUTE_UNUSED) |
| { |
| unsigned addr; |
| /* See if we need to make #pragma address variables volatile. */ |
| |
| if (TREE_CODE (node) == VAR_DECL) |
| { |
| const char *name = IDENTIFIER_POINTER (DECL_NAME (node)); |
| if (m32c_get_pragma_address (name, &addr)) |
| { |
| TREE_THIS_VOLATILE (node) = true; |
| } |
| } |
| } |
| |
| |
| struct GTY(()) pragma_entry { |
| const char *varname; |
| unsigned address; |
| }; |
| typedef struct pragma_entry pragma_entry; |
| |
| /* Hash table of pragma info. */ |
| static GTY((param_is (pragma_entry))) htab_t pragma_htab; |
| |
| static int |
| pragma_entry_eq (const void *p1, const void *p2) |
| { |
| const pragma_entry *old = (const pragma_entry *) p1; |
| const char *new_name = (const char *) p2; |
| |
| return strcmp (old->varname, new_name) == 0; |
| } |
| |
| static hashval_t |
| pragma_entry_hash (const void *p) |
| { |
| const pragma_entry *old = (const pragma_entry *) p; |
| return htab_hash_string (old->varname); |
| } |
| |
| void |
| m32c_note_pragma_address (const char *varname, unsigned address) |
| { |
| pragma_entry **slot; |
| |
| if (!pragma_htab) |
| pragma_htab = htab_create_ggc (31, pragma_entry_hash, |
| pragma_entry_eq, NULL); |
| |
| slot = (pragma_entry **) |
| htab_find_slot_with_hash (pragma_htab, varname, |
| htab_hash_string (varname), INSERT); |
| |
| if (!*slot) |
| { |
| *slot = ggc_alloc_pragma_entry (); |
| (*slot)->varname = ggc_strdup (varname); |
| } |
| (*slot)->address = address; |
| } |
| |
| static bool |
| m32c_get_pragma_address (const char *varname, unsigned *address) |
| { |
| pragma_entry **slot; |
| |
| if (!pragma_htab) |
| return false; |
| |
| slot = (pragma_entry **) |
| htab_find_slot_with_hash (pragma_htab, varname, |
| htab_hash_string (varname), NO_INSERT); |
| if (slot && *slot) |
| { |
| *address = (*slot)->address; |
| return true; |
| } |
| return false; |
| } |
| |
| void |
| m32c_output_aligned_common (FILE *stream, tree decl ATTRIBUTE_UNUSED, |
| const char *name, |
| int size, int align, int global) |
| { |
| unsigned address; |
| |
| if (m32c_get_pragma_address (name, &address)) |
| { |
| /* We never output these as global. */ |
| assemble_name (stream, name); |
| fprintf (stream, " = 0x%04x\n", address); |
| return; |
| } |
| if (!global) |
| { |
| fprintf (stream, "\t.local\t"); |
| assemble_name (stream, name); |
| fprintf (stream, "\n"); |
| } |
| fprintf (stream, "\t.comm\t"); |
| assemble_name (stream, name); |
| fprintf (stream, ",%u,%u\n", size, align / BITS_PER_UNIT); |
| } |
| |
| /* Predicates */ |
| |
| /* This is a list of legal subregs of hard regs. */ |
| static const struct { |
| unsigned char outer_mode_size; |
| unsigned char inner_mode_size; |
| unsigned char byte_mask; |
| unsigned char legal_when; |
| unsigned int regno; |
| } legal_subregs[] = { |
| {1, 2, 0x03, 1, R0_REGNO}, /* r0h r0l */ |
| {1, 2, 0x03, 1, R1_REGNO}, /* r1h r1l */ |
| {1, 2, 0x01, 1, A0_REGNO}, |
| {1, 2, 0x01, 1, A1_REGNO}, |
| |
| {1, 4, 0x01, 1, A0_REGNO}, |
| {1, 4, 0x01, 1, A1_REGNO}, |
| |
| {2, 4, 0x05, 1, R0_REGNO}, /* r2 r0 */ |
| {2, 4, 0x05, 1, R1_REGNO}, /* r3 r1 */ |
| {2, 4, 0x05, 16, A0_REGNO}, /* a1 a0 */ |
| {2, 4, 0x01, 24, A0_REGNO}, /* a1 a0 */ |
| {2, 4, 0x01, 24, A1_REGNO}, /* a1 a0 */ |
| |
| {4, 8, 0x55, 1, R0_REGNO}, /* r3 r1 r2 r0 */ |
| }; |
| |
| /* Returns TRUE if OP is a subreg of a hard reg which we don't |
| support. We also bail on MEMs with illegal addresses. */ |
| bool |
| m32c_illegal_subreg_p (rtx op) |
| { |
| int offset; |
| unsigned int i; |
| int src_mode, dest_mode; |
| |
| if (GET_CODE (op) == MEM |
| && ! m32c_legitimate_address_p (Pmode, XEXP (op, 0), false)) |
| { |
| return true; |
| } |
| |
| if (GET_CODE (op) != SUBREG) |
| return false; |
| |
| dest_mode = GET_MODE (op); |
| offset = SUBREG_BYTE (op); |
| op = SUBREG_REG (op); |
| src_mode = GET_MODE (op); |
| |
| if (GET_MODE_SIZE (dest_mode) == GET_MODE_SIZE (src_mode)) |
| return false; |
| if (GET_CODE (op) != REG) |
| return false; |
| if (REGNO (op) >= MEM0_REGNO) |
| return false; |
| |
| offset = (1 << offset); |
| |
| for (i = 0; i < ARRAY_SIZE (legal_subregs); i ++) |
| if (legal_subregs[i].outer_mode_size == GET_MODE_SIZE (dest_mode) |
| && legal_subregs[i].regno == REGNO (op) |
| && legal_subregs[i].inner_mode_size == GET_MODE_SIZE (src_mode) |
| && legal_subregs[i].byte_mask & offset) |
| { |
| switch (legal_subregs[i].legal_when) |
| { |
| case 1: |
| return false; |
| case 16: |
| if (TARGET_A16) |
| return false; |
| break; |
| case 24: |
| if (TARGET_A24) |
| return false; |
| break; |
| } |
| } |
| return true; |
| } |
| |
| /* Returns TRUE if we support a move between the first two operands. |
| At the moment, we just want to discourage mem to mem moves until |
| after reload, because reload has a hard time with our limited |
| number of address registers, and we can get into a situation where |
| we need three of them when we only have two. */ |
| bool |
| m32c_mov_ok (rtx * operands, enum machine_mode mode ATTRIBUTE_UNUSED) |
| { |
| rtx op0 = operands[0]; |
| rtx op1 = operands[1]; |
| |
| if (TARGET_A24) |
| return true; |
| |
| #define DEBUG_MOV_OK 0 |
| #if DEBUG_MOV_OK |
| fprintf (stderr, "m32c_mov_ok %s\n", mode_name[mode]); |
| debug_rtx (op0); |
| debug_rtx (op1); |
| #endif |
| |
| if (GET_CODE (op0) == SUBREG) |
| op0 = XEXP (op0, 0); |
| if (GET_CODE (op1) == SUBREG) |
| op1 = XEXP (op1, 0); |
| |
| if (GET_CODE (op0) == MEM |
| && GET_CODE (op1) == MEM |
| && ! reload_completed) |
| { |
| #if DEBUG_MOV_OK |
| fprintf (stderr, " - no, mem to mem\n"); |
| #endif |
| return false; |
| } |
| |
| #if DEBUG_MOV_OK |
| fprintf (stderr, " - ok\n"); |
| #endif |
| return true; |
| } |
| |
| /* Returns TRUE if two consecutive HImode mov instructions, generated |
| for moving an immediate double data to a double data type variable |
| location, can be combined into single SImode mov instruction. */ |
| bool |
| m32c_immd_dbl_mov (rtx * operands ATTRIBUTE_UNUSED, |
| enum machine_mode mode ATTRIBUTE_UNUSED) |
| { |
| /* ??? This relied on the now-defunct MEM_SCALAR and MEM_IN_STRUCT_P |
| flags. */ |
| return false; |
| } |
| |
| /* Expanders */ |
| |
| /* Subregs are non-orthogonal for us, because our registers are all |
| different sizes. */ |
| static rtx |
| m32c_subreg (enum machine_mode outer, |
| rtx x, enum machine_mode inner, int byte) |
| { |
| int r, nr = -1; |
| |
| /* Converting MEMs to different types that are the same size, we |
| just rewrite them. */ |
| if (GET_CODE (x) == SUBREG |
| && SUBREG_BYTE (x) == 0 |
| && GET_CODE (SUBREG_REG (x)) == MEM |
| && (GET_MODE_SIZE (GET_MODE (x)) |
| == GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))))) |
| { |
| rtx oldx = x; |
| x = gen_rtx_MEM (GET_MODE (x), XEXP (SUBREG_REG (x), 0)); |
| MEM_COPY_ATTRIBUTES (x, SUBREG_REG (oldx)); |
| } |
| |
| /* Push/pop get done as smaller push/pops. */ |
| if (GET_CODE (x) == MEM |
| && (GET_CODE (XEXP (x, 0)) == PRE_DEC |
| || GET_CODE (XEXP (x, 0)) == POST_INC)) |
| return gen_rtx_MEM (outer, XEXP (x, 0)); |
| if (GET_CODE (x) == SUBREG |
| && GET_CODE (XEXP (x, 0)) == MEM |
| && (GET_CODE (XEXP (XEXP (x, 0), 0)) == PRE_DEC |
| || GET_CODE (XEXP (XEXP (x, 0), 0)) == POST_INC)) |
| return gen_rtx_MEM (outer, XEXP (XEXP (x, 0), 0)); |
| |
| if (GET_CODE (x) != REG) |
| { |
| rtx r = simplify_gen_subreg (outer, x, inner, byte); |
| if (GET_CODE (r) == SUBREG |
| && GET_CODE (x) == MEM |
| && MEM_VOLATILE_P (x)) |
| { |
| /* Volatile MEMs don't get simplified, but we need them to |
| be. We are little endian, so the subreg byte is the |
| offset. */ |
| r = adjust_address_nv (x, outer, byte); |
| } |
| return r; |
| } |
| |
| r = REGNO (x); |
| if (r >= FIRST_PSEUDO_REGISTER || r == AP_REGNO) |
| return simplify_gen_subreg (outer, x, inner, byte); |
| |
| if (IS_MEM_REGNO (r)) |
| return simplify_gen_subreg (outer, x, inner, byte); |
| |
| /* This is where the complexities of our register layout are |
| described. */ |
| if (byte == 0) |
| nr = r; |
| else if (outer == HImode) |
| { |
| if (r == R0_REGNO && byte == 2) |
| nr = R2_REGNO; |
| else if (r == R0_REGNO && byte == 4) |
| nr = R1_REGNO; |
| else if (r == R0_REGNO && byte == 6) |
| nr = R3_REGNO; |
| else if (r == R1_REGNO && byte == 2) |
| nr = R3_REGNO; |
| else if (r == A0_REGNO && byte == 2) |
| nr = A1_REGNO; |
| } |
| else if (outer == SImode) |
| { |
| if (r == R0_REGNO && byte == 0) |
| nr = R0_REGNO; |
| else if (r == R0_REGNO && byte == 4) |
| nr = R1_REGNO; |
| } |
| if (nr == -1) |
| { |
| fprintf (stderr, "m32c_subreg %s %s %d\n", |
| mode_name[outer], mode_name[inner], byte); |
| debug_rtx (x); |
| gcc_unreachable (); |
| } |
| return gen_rtx_REG (outer, nr); |
| } |
| |
| /* Used to emit move instructions. We split some moves, |
| and avoid mem-mem moves. */ |
| int |
| m32c_prepare_move (rtx * operands, enum machine_mode mode) |
| { |
| if (far_addr_space_p (operands[0]) |
| && CONSTANT_P (operands[1])) |
| { |
| operands[1] = force_reg (GET_MODE (operands[0]), operands[1]); |
| } |
| if (TARGET_A16 && mode == PSImode) |
| return m32c_split_move (operands, mode, 1); |
| if ((GET_CODE (operands[0]) == MEM) |
| && (GET_CODE (XEXP (operands[0], 0)) == PRE_MODIFY)) |
| { |
| rtx pmv = XEXP (operands[0], 0); |
| rtx dest_reg = XEXP (pmv, 0); |
| rtx dest_mod = XEXP (pmv, 1); |
| |
| emit_insn (gen_rtx_SET (Pmode, dest_reg, dest_mod)); |
| operands[0] = gen_rtx_MEM (mode, dest_reg); |
| } |
| if (can_create_pseudo_p () && MEM_P (operands[0]) && MEM_P (operands[1])) |
| operands[1] = copy_to_mode_reg (mode, operands[1]); |
| return 0; |
| } |
| |
| #define DEBUG_SPLIT 0 |
| |
| /* Returns TRUE if the given PSImode move should be split. We split |
| for all r8c/m16c moves, since it doesn't support them, and for |
| POP.L as we can only *push* SImode. */ |
| int |
| m32c_split_psi_p (rtx * operands) |
| { |
| #if DEBUG_SPLIT |
| fprintf (stderr, "\nm32c_split_psi_p\n"); |
| debug_rtx (operands[0]); |
| debug_rtx (operands[1]); |
| #endif |
| if (TARGET_A16) |
| { |
| #if DEBUG_SPLIT |
| fprintf (stderr, "yes, A16\n"); |
| #endif |
| return 1; |
| } |
| if (GET_CODE (operands[1]) == MEM |
| && GET_CODE (XEXP (operands[1], 0)) == POST_INC) |
| { |
| #if DEBUG_SPLIT |
| fprintf (stderr, "yes, pop.l\n"); |
| #endif |
| return 1; |
| } |
| #if DEBUG_SPLIT |
| fprintf (stderr, "no, default\n"); |
| #endif |
| return 0; |
| } |
| |
| /* Split the given move. SPLIT_ALL is 0 if splitting is optional |
| (define_expand), 1 if it is not optional (define_insn_and_split), |
| and 3 for define_split (alternate api). */ |
| int |
| m32c_split_move (rtx * operands, enum machine_mode mode, int split_all) |
| { |
| rtx s[4], d[4]; |
| int parts, si, di, rev = 0; |
| int rv = 0, opi = 2; |
| enum machine_mode submode = HImode; |
| rtx *ops, local_ops[10]; |
| |
| /* define_split modifies the existing operands, but the other two |
| emit new insns. OPS is where we store the operand pairs, which |
| we emit later. */ |
| if (split_all == 3) |
| ops = operands; |
| else |
| ops = local_ops; |
| |
| /* Else HImode. */ |
| if (mode == DImode) |
| submode = SImode; |
| |
| /* Before splitting mem-mem moves, force one operand into a |
| register. */ |
| if (can_create_pseudo_p () && MEM_P (operands[0]) && MEM_P (operands[1])) |
| { |
| #if DEBUG0 |
| fprintf (stderr, "force_reg...\n"); |
| debug_rtx (operands[1]); |
| #endif |
| operands[1] = force_reg (mode, operands[1]); |
| #if DEBUG0 |
| debug_rtx (operands[1]); |
| #endif |
| } |
| |
| parts = 2; |
| |
| #if DEBUG_SPLIT |
| fprintf (stderr, "\nsplit_move %d all=%d\n", !can_create_pseudo_p (), |
| split_all); |
| debug_rtx (operands[0]); |
| debug_rtx (operands[1]); |
| #endif |
| |
| /* Note that split_all is not used to select the api after this |
| point, so it's safe to set it to 3 even with define_insn. */ |
| /* None of the chips can move SI operands to sp-relative addresses, |
| so we always split those. */ |
| if (m32c_extra_constraint_p (operands[0], 'S', "Ss")) |
| split_all = 3; |
| |
| if (TARGET_A16 |
| && (far_addr_space_p (operands[0]) |
| || far_addr_space_p (operands[1]))) |
| split_all |= 1; |
| |
| /* We don't need to split these. */ |
| if (TARGET_A24 |
| && split_all != 3 |
| && (mode == SImode || mode == PSImode) |
| && !(GET_CODE (operands[1]) == MEM |
| && GET_CODE (XEXP (operands[1], 0)) == POST_INC)) |
| return 0; |
| |
| /* First, enumerate the subregs we'll be dealing with. */ |
| for (si = 0; si < parts; si++) |
| { |
| d[si] = |
| m32c_subreg (submode, operands[0], mode, |
| si * GET_MODE_SIZE (submode)); |
| s[si] = |
| m32c_subreg (submode, operands[1], mode, |
| si * GET_MODE_SIZE (submode)); |
| } |
| |
| /* Split pushes by emitting a sequence of smaller pushes. */ |
| if (GET_CODE (d[0]) == MEM && GET_CODE (XEXP (d[0], 0)) == PRE_DEC) |
| { |
| for (si = parts - 1; si >= 0; si--) |
| { |
| ops[opi++] = gen_rtx_MEM (submode, |
| gen_rtx_PRE_DEC (Pmode, |
| gen_rtx_REG (Pmode, |
| SP_REGNO))); |
| ops[opi++] = s[si]; |
| } |
| |
| rv = 1; |
| } |
| /* Likewise for pops. */ |
| else if (GET_CODE (s[0]) == MEM && GET_CODE (XEXP (s[0], 0)) == POST_INC) |
| { |
| for (di = 0; di < parts; di++) |
| { |
| ops[opi++] = d[di]; |
| ops[opi++] = gen_rtx_MEM (submode, |
| gen_rtx_POST_INC (Pmode, |
| gen_rtx_REG (Pmode, |
| SP_REGNO))); |
| } |
| rv = 1; |
| } |
| else if (split_all) |
| { |
| /* if d[di] == s[si] for any di < si, we'll early clobber. */ |
| for (di = 0; di < parts - 1; di++) |
| for (si = di + 1; si < parts; si++) |
| if (reg_mentioned_p (d[di], s[si])) |
| rev = 1; |
| |
| if (rev) |
| for (si = 0; si < parts; si++) |
| { |
| ops[opi++] = d[si]; |
| ops[opi++] = s[si]; |
| } |
| else |
| for (si = parts - 1; si >= 0; si--) |
| { |
| ops[opi++] = d[si]; |
| ops[opi++] = s[si]; |
| } |
| rv = 1; |
| } |
| /* Now emit any moves we may have accumulated. */ |
| if (rv && split_all != 3) |
| { |
| int i; |
| for (i = 2; i < opi; i += 2) |
| emit_move_insn (ops[i], ops[i + 1]); |
| } |
| return rv; |
| } |
| |
| /* The m32c has a number of opcodes that act like memcpy, strcmp, and |
| the like. For the R8C they expect one of the addresses to be in |
| R1L:An so we need to arrange for that. Otherwise, it's just a |
| matter of picking out the operands we want and emitting the right |
| pattern for them. All these expanders, which correspond to |
| patterns in blkmov.md, must return nonzero if they expand the insn, |
| or zero if they should FAIL. */ |
| |
| /* This is a memset() opcode. All operands are implied, so we need to |
| arrange for them to be in the right registers. The opcode wants |
| addresses, not [mem] syntax. $0 is the destination (MEM:BLK), $1 |
| the count (HI), and $2 the value (QI). */ |
| int |
| m32c_expand_setmemhi(rtx *operands) |
| { |
| rtx desta, count, val; |
| rtx desto, counto; |
| |
| desta = XEXP (operands[0], 0); |
| count = operands[1]; |
| val = operands[2]; |
| |
| desto = gen_reg_rtx (Pmode); |
| counto = gen_reg_rtx (HImode); |
| |
| if (GET_CODE (desta) != REG |
| || REGNO (desta) < FIRST_PSEUDO_REGISTER) |
| desta = copy_to_mode_reg (Pmode, desta); |
| |
| /* This looks like an arbitrary restriction, but this is by far the |
| most common case. For counts 8..14 this actually results in |
| smaller code with no speed penalty because the half-sized |
| constant can be loaded with a shorter opcode. */ |
| if (GET_CODE (count) == CONST_INT |
| && GET_CODE (val) == CONST_INT |
| && ! (INTVAL (count) & 1) |
| && (INTVAL (count) > 1) |
| && (INTVAL (val) <= 7 && INTVAL (val) >= -8)) |
| { |
| unsigned v = INTVAL (val) & 0xff; |
| v = v | (v << 8); |
| count = copy_to_mode_reg (HImode, GEN_INT (INTVAL (count) / 2)); |
| val = copy_to_mode_reg (HImode, GEN_INT (v)); |
| if (TARGET_A16) |
| emit_insn (gen_setmemhi_whi_op (desto, counto, val, desta, count)); |
| else |
| emit_insn (gen_setmemhi_wpsi_op (desto, counto, val, desta, count)); |
| return 1; |
| } |
| |
| /* This is the generalized memset() case. */ |
| if (GET_CODE (val) != REG |
| || REGNO (val) < FIRST_PSEUDO_REGISTER) |
| val = copy_to_mode_reg (QImode, val); |
| |
| if (GET_CODE (count) != REG |
| || REGNO (count) < FIRST_PSEUDO_REGISTER) |
| count = copy_to_mode_reg (HImode, count); |
| |
| if (TARGET_A16) |
| emit_insn (gen_setmemhi_bhi_op (desto, counto, val, desta, count)); |
| else |
| emit_insn (gen_setmemhi_bpsi_op (desto, counto, val, desta, count)); |
| |
| return 1; |
| } |
| |
| /* This is a memcpy() opcode. All operands are implied, so we need to |
| arrange for them to be in the right registers. The opcode wants |
| addresses, not [mem] syntax. $0 is the destination (MEM:BLK), $1 |
| is the source (MEM:BLK), and $2 the count (HI). */ |
| int |
| m32c_expand_movmemhi(rtx *operands) |
| { |
| rtx desta, srca, count; |
| rtx desto, srco, counto; |
| |
| desta = XEXP (operands[0], 0); |
| srca = XEXP (operands[1], 0); |
| count = operands[2]; |
| |
| desto = gen_reg_rtx (Pmode); |
| srco = gen_reg_rtx (Pmode); |
| counto = gen_reg_rtx (HImode); |
| |
| if (GET_CODE (desta) != REG |
| || REGNO (desta) < FIRST_PSEUDO_REGISTER) |
| desta = copy_to_mode_reg (Pmode, desta); |
| |
| if (GET_CODE (srca) != REG |
| || REGNO (srca) < FIRST_PSEUDO_REGISTER) |
| srca = copy_to_mode_reg (Pmode, srca); |
| |
| /* Similar to setmem, but we don't need to check the value. */ |
| if (GET_CODE (count) == CONST_INT |
| && ! (INTVAL (count) & 1) |
| && (INTVAL (count) > 1)) |
| { |
| count = copy_to_mode_reg (HImode, GEN_INT (INTVAL (count) / 2)); |
| if (TARGET_A16) |
| emit_insn (gen_movmemhi_whi_op (desto, srco, counto, desta, srca, count)); |
| else |
| emit_insn (gen_movmemhi_wpsi_op (desto, srco, counto, desta, srca, count)); |
| return 1; |
| } |
| |
| /* This is the generalized memset() case. */ |
| if (GET_CODE (count) != REG |
| || REGNO (count) < FIRST_PSEUDO_REGISTER) |
| count = copy_to_mode_reg (HImode, count); |
| |
| if (TARGET_A16) |
| emit_insn (gen_movmemhi_bhi_op (desto, srco, counto, desta, srca, count)); |
| else |
| emit_insn (gen_movmemhi_bpsi_op (desto, srco, counto, desta, srca, count)); |
| |
| return 1; |
| } |
| |
| /* This is a stpcpy() opcode. $0 is the destination (MEM:BLK) after |
| the copy, which should point to the NUL at the end of the string, |
| $1 is the destination (MEM:BLK), and $2 is the source (MEM:BLK). |
| Since our opcode leaves the destination pointing *after* the NUL, |
| we must emit an adjustment. */ |
| int |
| m32c_expand_movstr(rtx *operands) |
| { |
| rtx desta, srca; |
| rtx desto, srco; |
| |
| desta = XEXP (operands[1], 0); |
| srca = XEXP (operands[2], 0); |
| |
| desto = gen_reg_rtx (Pmode); |
| srco = gen_reg_rtx (Pmode); |
| |
| if (GET_CODE (desta) != REG |
| || REGNO (desta) < FIRST_PSEUDO_REGISTER) |
| desta = copy_to_mode_reg (Pmode, desta); |
| |
| if (GET_CODE (srca) != REG |
| || REGNO (srca) < FIRST_PSEUDO_REGISTER) |
| srca = copy_to_mode_reg (Pmode, srca); |
| |
| emit_insn (gen_movstr_op (desto, srco, desta, srca)); |
| /* desto ends up being a1, which allows this type of add through MOVA. */ |
| emit_insn (gen_addpsi3 (operands[0], desto, GEN_INT (-1))); |
| |
| return 1; |
| } |
| |
| /* This is a strcmp() opcode. $0 is the destination (HI) which holds |
| <=>0 depending on the comparison, $1 is one string (MEM:BLK), and |
| $2 is the other (MEM:BLK). We must do the comparison, and then |
| convert the flags to a signed integer result. */ |
| int |
| m32c_expand_cmpstr(rtx *operands) |
| { |
| rtx src1a, src2a; |
| |
| src1a = XEXP (operands[1], 0); |
| src2a = XEXP (operands[2], 0); |
| |
| if (GET_CODE (src1a) != REG |
| || REGNO (src1a) < FIRST_PSEUDO_REGISTER) |
| src1a = copy_to_mode_reg (Pmode, src1a); |
| |
| if (GET_CODE (src2a) != REG |
| || REGNO (src2a) < FIRST_PSEUDO_REGISTER) |
| src2a = copy_to_mode_reg (Pmode, src2a); |
| |
| emit_insn (gen_cmpstrhi_op (src1a, src2a, src1a, src2a)); |
| emit_insn (gen_cond_to_int (operands[0])); |
| |
| return 1; |
| } |
| |
| |
| typedef rtx (*shift_gen_func)(rtx, rtx, rtx); |
| |
| static shift_gen_func |
| shift_gen_func_for (int mode, int code) |
| { |
| #define GFF(m,c,f) if (mode == m && code == c) return f |
| GFF(QImode, ASHIFT, gen_ashlqi3_i); |
| GFF(QImode, ASHIFTRT, gen_ashrqi3_i); |
| GFF(QImode, LSHIFTRT, gen_lshrqi3_i); |
| GFF(HImode, ASHIFT, gen_ashlhi3_i); |
| GFF(HImode, ASHIFTRT, gen_ashrhi3_i); |
| GFF(HImode, LSHIFTRT, gen_lshrhi3_i); |
| GFF(PSImode, ASHIFT, gen_ashlpsi3_i); |
| GFF(PSImode, ASHIFTRT, gen_ashrpsi3_i); |
| GFF(PSImode, LSHIFTRT, gen_lshrpsi3_i); |
| GFF(SImode, ASHIFT, TARGET_A16 ? gen_ashlsi3_16 : gen_ashlsi3_24); |
| GFF(SImode, ASHIFTRT, TARGET_A16 ? gen_ashrsi3_16 : gen_ashrsi3_24); |
| GFF(SImode, LSHIFTRT, TARGET_A16 ? gen_lshrsi3_16 : gen_lshrsi3_24); |
| #undef GFF |
| gcc_unreachable (); |
| } |
| |
| /* The m32c only has one shift, but it takes a signed count. GCC |
| doesn't want this, so we fake it by negating any shift count when |
| we're pretending to shift the other way. Also, the shift count is |
| limited to -8..8. It's slightly better to use two shifts for 9..15 |
| than to load the count into r1h, so we do that too. */ |
| int |
| m32c_prepare_shift (rtx * operands, int scale, int shift_code) |
| { |
| enum machine_mode mode = GET_MODE (operands[0]); |
| shift_gen_func func = shift_gen_func_for (mode, shift_code); |
| rtx temp; |
| |
| if (GET_CODE (operands[2]) == CONST_INT) |
| { |
| int maxc = TARGET_A24 && (mode == PSImode || mode == SImode) ? 32 : 8; |
| int count = INTVAL (operands[2]) * scale; |
| |
| while (count > maxc) |
| { |
| temp = gen_reg_rtx (mode); |
| emit_insn (func (temp, operands[1], GEN_INT (maxc))); |
| operands[1] = temp; |
| count -= maxc; |
| } |
| while (count < -maxc) |
| { |
| temp = gen_reg_rtx (mode); |
| emit_insn (func (temp, operands[1], GEN_INT (-maxc))); |
| operands[1] = temp; |
| count += maxc; |
| } |
| emit_insn (func (operands[0], operands[1], GEN_INT (count))); |
| return 1; |
| } |
| |
| temp = gen_reg_rtx (QImode); |
| if (scale < 0) |
| /* The pattern has a NEG that corresponds to this. */ |
| emit_move_insn (temp, gen_rtx_NEG (QImode, operands[2])); |
| else if (TARGET_A16 && mode == SImode) |
| /* We do this because the code below may modify this, we don't |
| want to modify the origin of this value. */ |
| emit_move_insn (temp, operands[2]); |
| else |
| /* We'll only use it for the shift, no point emitting a move. */ |
| temp = operands[2]; |
| |
| if (TARGET_A16 && GET_MODE_SIZE (mode) == 4) |
| { |
| /* The m16c has a limit of -16..16 for SI shifts, even when the |
| shift count is in a register. Since there are so many targets |
| of these shifts, it's better to expand the RTL here than to |
| call a helper function. |
| |
| The resulting code looks something like this: |
| |
| cmp.b r1h,-16 |
| jge.b 1f |
| shl.l -16,dest |
| add.b r1h,16 |
| 1f: cmp.b r1h,16 |
| jle.b 1f |
| shl.l 16,dest |
| sub.b r1h,16 |
| 1f: shl.l r1h,dest |
| |
| We take advantage of the fact that "negative" shifts are |
| undefined to skip one of the comparisons. */ |
| |
| rtx count; |
| rtx label, insn, tempvar; |
| |
| emit_move_insn (operands[0], operands[1]); |
| |
| count = temp; |
| label = gen_label_rtx (); |
| LABEL_NUSES (label) ++; |
| |
| tempvar = gen_reg_rtx (mode); |
| |
| if (shift_code == ASHIFT) |
| { |
| /* This is a left shift. We only need check positive counts. */ |
| emit_jump_insn (gen_cbranchqi4 (gen_rtx_LE (VOIDmode, 0, 0), |
| count, GEN_INT (16), label)); |
| emit_insn (func (tempvar, operands[0], GEN_INT (8))); |
| emit_insn (func (operands[0], tempvar, GEN_INT (8))); |
| insn = emit_insn (gen_addqi3 (count, count, GEN_INT (-16))); |
| emit_label_after (label, insn); |
| } |
| else |
| { |
| /* This is a right shift. We only need check negative counts. */ |
| emit_jump_insn (gen_cbranchqi4 (gen_rtx_GE (VOIDmode, 0, 0), |
| count, GEN_INT (-16), label)); |
| emit_insn (func (tempvar, operands[0], GEN_INT (-8))); |
| emit_insn (func (operands[0], tempvar, GEN_INT (-8))); |
| insn = emit_insn (gen_addqi3 (count, count, GEN_INT (16))); |
| emit_label_after (label, insn); |
| } |
| operands[1] = operands[0]; |
| emit_insn (func (operands[0], operands[0], count)); |
| return 1; |
| } |
| |
| operands[2] = temp; |
| return 0; |
| } |
| |
| /* The m32c has a limited range of operations that work on PSImode |
| values; we have to expand to SI, do the math, and truncate back to |
| PSI. Yes, this is expensive, but hopefully gcc will learn to avoid |
| those cases. */ |
| void |
| m32c_expand_neg_mulpsi3 (rtx * operands) |
| { |
| /* operands: a = b * i */ |
| rtx temp1; /* b as SI */ |
| rtx scale /* i as SI */; |
| rtx temp2; /* a*b as SI */ |
| |
| temp1 = gen_reg_rtx (SImode); |
| temp2 = gen_reg_rtx (SImode); |
| if (GET_CODE (operands[2]) != CONST_INT) |
| { |
| scale = gen_reg_rtx (SImode); |
| emit_insn (gen_zero_extendpsisi2 (scale, operands[2])); |
| } |
| else |
| scale = copy_to_mode_reg (SImode, operands[2]); |
| |
| emit_insn (gen_zero_extendpsisi2 (temp1, operands[1])); |
| temp2 = expand_simple_binop (SImode, MULT, temp1, scale, temp2, 1, OPTAB_LIB); |
| emit_insn (gen_truncsipsi2 (operands[0], temp2)); |
| } |
| |
| /* Pattern Output Functions */ |
| |
| int |
| m32c_expand_movcc (rtx *operands) |
| { |
| rtx rel = operands[1]; |
| |
| if (GET_CODE (rel) != EQ && GET_CODE (rel) != NE) |
| return 1; |
| if (GET_CODE (operands[2]) != CONST_INT |
| || GET_CODE (operands[3]) != CONST_INT) |
| return 1; |
| if (GET_CODE (rel) == NE) |
| { |
| rtx tmp = operands[2]; |
| operands[2] = operands[3]; |
| operands[3] = tmp; |
| rel = gen_rtx_EQ (GET_MODE (rel), XEXP (rel, 0), XEXP (rel, 1)); |
| } |
| |
| emit_move_insn (operands[0], |
| gen_rtx_IF_THEN_ELSE (GET_MODE (operands[0]), |
| rel, |
| operands[2], |
| operands[3])); |
| return 0; |
| } |
| |
| /* Used for the "insv" pattern. Return nonzero to fail, else done. */ |
| int |
| m32c_expand_insv (rtx *operands) |
| { |
| rtx op0, src0, p; |
| int mask; |
| |
| if (INTVAL (operands[1]) != 1) |
| return 1; |
| |
| /* Our insv opcode (bset, bclr) can only insert a one-bit constant. */ |
| if (GET_CODE (operands[3]) != CONST_INT) |
| return 1; |
| if (INTVAL (operands[3]) != 0 |
| && INTVAL (operands[3]) != 1 |
| && INTVAL (operands[3]) != -1) |
| return 1; |
| |
| mask = 1 << INTVAL (operands[2]); |
| |
| op0 = operands[0]; |
| if (GET_CODE (op0) == SUBREG |
| && SUBREG_BYTE (op0) == 0) |
| { |
| rtx sub = SUBREG_REG (op0); |
| if (GET_MODE (sub) == HImode || GET_MODE (sub) == QImode) |
| op0 = sub; |
| } |
| |
| if (!can_create_pseudo_p () |
| || (GET_CODE (op0) == MEM && MEM_VOLATILE_P (op0))) |
| src0 = op0; |
| else |
| { |
| src0 = gen_reg_rtx (GET_MODE (op0)); |
| emit_move_insn (src0, op0); |
| } |
| |
| if (GET_MODE (op0) == HImode |
| && INTVAL (operands[2]) >= 8 |
| && GET_CODE (op0) == MEM) |
| { |
| /* We are little endian. */ |
| rtx new_mem = gen_rtx_MEM (QImode, plus_constant (XEXP (op0, 0), 1)); |
| MEM_COPY_ATTRIBUTES (new_mem, op0); |
| mask >>= 8; |
| } |
| |
| /* First, we generate a mask with the correct polarity. If we are |
| storing a zero, we want an AND mask, so invert it. */ |
| if (INTVAL (operands[3]) == 0) |
| { |
| /* Storing a zero, use an AND mask */ |
| if (GET_MODE (op0) == HImode) |
| mask ^= 0xffff; |
| else |
| mask ^= 0xff; |
| } |
| /* Now we need to properly sign-extend the mask in case we need to |
| fall back to an AND or OR opcode. */ |
| if (GET_MODE (op0) == HImode) |
| { |
| if (mask & 0x8000) |
| mask -= 0x10000; |
| } |
| else |
| { |
| if (mask & 0x80) |
| mask -= 0x100; |
| } |
| |
| switch ( (INTVAL (operands[3]) ? 4 : 0) |
| + ((GET_MODE (op0) == HImode) ? 2 : 0) |
| + (TARGET_A24 ? 1 : 0)) |
| { |
| case 0: p = gen_andqi3_16 (op0, src0, GEN_INT (mask)); break; |
| case 1: p = gen_andqi3_24 (op0, src0, GEN_INT (mask)); break; |
| case 2: p = gen_andhi3_16 (op0, src0, GEN_INT (mask)); break; |
| case 3: p = gen_andhi3_24 (op0, src0, GEN_INT (mask)); break; |
| case 4: p = gen_iorqi3_16 (op0, src0, GEN_INT (mask)); break; |
| case 5: p = gen_iorqi3_24 (op0, src0, GEN_INT (mask)); break; |
| case 6: p = gen_iorhi3_16 (op0, src0, GEN_INT (mask)); break; |
| case 7: p = gen_iorhi3_24 (op0, src0, GEN_INT (mask)); break; |
| default: p = NULL_RTX; break; /* Not reached, but silences a warning. */ |
| } |
| |
| emit_insn (p); |
| return 0; |
| } |
| |
| const char * |
| m32c_scc_pattern(rtx *operands, RTX_CODE code) |
| { |
| static char buf[30]; |
| if (GET_CODE (operands[0]) == REG |
| && REGNO (operands[0]) == R0_REGNO) |
| { |
| if (code == EQ) |
| return "stzx\t#1,#0,r0l"; |
| if (code == NE) |
| return "stzx\t#0,#1,r0l"; |
| } |
| sprintf(buf, "bm%s\t0,%%h0\n\tand.b\t#1,%%0", GET_RTX_NAME (code)); |
| return buf; |
| } |
| |
| /* Encode symbol attributes of a SYMBOL_REF into its |
| SYMBOL_REF_FLAGS. */ |
| static void |
| m32c_encode_section_info (tree decl, rtx rtl, int first) |
| { |
| int extra_flags = 0; |
| |
| default_encode_section_info (decl, rtl, first); |
| if (TREE_CODE (decl) == FUNCTION_DECL |
| && m32c_special_page_vector_p (decl)) |
| |
| extra_flags = SYMBOL_FLAG_FUNCVEC_FUNCTION; |
| |
| if (extra_flags) |
| SYMBOL_REF_FLAGS (XEXP (rtl, 0)) |= extra_flags; |
| } |
| |
| /* Returns TRUE if the current function is a leaf, and thus we can |
| determine which registers an interrupt function really needs to |
| save. The logic below is mostly about finding the insn sequence |
| that's the function, versus any sequence that might be open for the |
| current insn. */ |
| static int |
| m32c_leaf_function_p (void) |
| { |
| rtx saved_first, saved_last; |
| struct sequence_stack *seq; |
| int rv; |
| |
| saved_first = crtl->emit.x_first_insn; |
| saved_last = crtl->emit.x_last_insn; |
| for (seq = crtl->emit.sequence_stack; seq && seq->next; seq = seq->next) |
| ; |
| if (seq) |
| { |
| crtl->emit.x_first_insn = seq->first; |
| crtl->emit.x_last_insn = seq->last; |
| } |
| |
| rv = leaf_function_p (); |
| |
| crtl->emit.x_first_insn = saved_first; |
| crtl->emit.x_last_insn = saved_last; |
| return rv; |
| } |
| |
| /* Returns TRUE if the current function needs to use the ENTER/EXIT |
| opcodes. If the function doesn't need the frame base or stack |
| pointer, it can use the simpler RTS opcode. */ |
| static bool |
| m32c_function_needs_enter (void) |
| { |
| rtx insn; |
| struct sequence_stack *seq; |
| rtx sp = gen_rtx_REG (Pmode, SP_REGNO); |
| rtx fb = gen_rtx_REG (Pmode, FB_REGNO); |
| |
| insn = get_insns (); |
| for (seq = crtl->emit.sequence_stack; |
| seq; |
| insn = seq->first, seq = seq->next); |
| |
| while (insn) |
| { |
| if (reg_mentioned_p (sp, insn)) |
| return true; |
| if (reg_mentioned_p (fb, insn)) |
| return true; |
| insn = NEXT_INSN (insn); |
| } |
| return false; |
| } |
| |
| /* Mark all the subexpressions of the PARALLEL rtx PAR as |
| frame-related. Return PAR. |
| |
| dwarf2out.c:dwarf2out_frame_debug_expr ignores sub-expressions of a |
| PARALLEL rtx other than the first if they do not have the |
| FRAME_RELATED flag set on them. So this function is handy for |
| marking up 'enter' instructions. */ |
| static rtx |
| m32c_all_frame_related (rtx par) |
| { |
| int len = XVECLEN (par, 0); |
| int i; |
| |
| for (i = 0; i < len; i++) |
| F (XVECEXP (par, 0, i)); |
| |
| return par; |
| } |
| |
| /* Emits the prologue. See the frame layout comment earlier in this |
| file. We can reserve up to 256 bytes with the ENTER opcode, beyond |
| that we manually update sp. */ |
| void |
| m32c_emit_prologue (void) |
| { |
| int frame_size, extra_frame_size = 0, reg_save_size; |
| int complex_prologue = 0; |
| |
| cfun->machine->is_leaf = m32c_leaf_function_p (); |
| if (interrupt_p (cfun->decl)) |
| { |
| cfun->machine->is_interrupt = 1; |
| complex_prologue = 1; |
| } |
| else if (bank_switch_p (cfun->decl)) |
| warning (OPT_Wattributes, |
| "%<bank_switch%> has no effect on non-interrupt functions"); |
| |
| reg_save_size = m32c_pushm_popm (PP_justcount); |
| |
| if (interrupt_p (cfun->decl)) |
| { |
| if (bank_switch_p (cfun->decl)) |
| emit_insn (gen_fset_b ()); |
| else if (cfun->machine->intr_pushm) |
| emit_insn (gen_pushm (GEN_INT (cfun->machine->intr_pushm))); |
| } |
| |
| frame_size = |
| m32c_initial_elimination_offset (FB_REGNO, SP_REGNO) - reg_save_size; |
| if (frame_size == 0 |
| && !m32c_function_needs_enter ()) |
| cfun->machine->use_rts = 1; |
| |
| if (frame_size > 254) |
| { |
| extra_frame_size = frame_size - 254; |
| frame_size = 254; |
| } |
| if (cfun->machine->use_rts == 0) |
| F (emit_insn (m32c_all_frame_related |
| (TARGET_A16 |
| ? gen_prologue_enter_16 (GEN_INT (frame_size + 2)) |
| : gen_prologue_enter_24 (GEN_INT (frame_size + 4))))); |
| |
| if (extra_frame_size) |
| { |
| complex_prologue = 1; |
| if (TARGET_A16) |
| F (emit_insn (gen_addhi3 (gen_rtx_REG (HImode, SP_REGNO), |
| gen_rtx_REG (HImode, SP_REGNO), |
| GEN_INT (-extra_frame_size)))); |
| else |
| F (emit_insn (gen_addpsi3 (gen_rtx_REG (PSImode, SP_REGNO), |
| gen_rtx_REG (PSImode, SP_REGNO), |
| GEN_INT (-extra_frame_size)))); |
| } |
| |
| complex_prologue += m32c_pushm_popm (PP_pushm); |
| |
| /* This just emits a comment into the .s file for debugging. */ |
| if (complex_prologue) |
| emit_insn (gen_prologue_end ()); |
| } |
| |
| /* Likewise, for the epilogue. The only exception is that, for |
| interrupts, we must manually unwind the frame as the REIT opcode |
| doesn't do that. */ |
| void |
| m32c_emit_epilogue (void) |
| { |
| int popm_count = m32c_pushm_popm (PP_justcount); |
| |
| /* This just emits a comment into the .s file for debugging. */ |
| if (popm_count > 0 || cfun->machine->is_interrupt) |
| emit_insn (gen_epilogue_start ()); |
| |
| if (popm_count > 0) |
| m32c_pushm_popm (PP_popm); |
| |
| if (cfun->machine->is_interrupt) |
| { |
| enum machine_mode spmode = TARGET_A16 ? HImode : PSImode; |
| |
| /* REIT clears B flag and restores $fp for us, but we still |
| have to fix up the stack. USE_RTS just means we didn't |
| emit ENTER. */ |
| if (!cfun->machine->use_rts) |
| { |
| emit_move_insn (gen_rtx_REG (spmode, A0_REGNO), |
| gen_rtx_REG (spmode, FP_REGNO)); |
| emit_move_insn (gen_rtx_REG (spmode, SP_REGNO), |
| gen_rtx_REG (spmode, A0_REGNO)); |
| /* We can't just add this to the POPM because it would be in |
| the wrong order, and wouldn't fix the stack if we're bank |
| switching. */ |
| if (TARGET_A16) |
| emit_insn (gen_pophi_16 (gen_rtx_REG (HImode, FP_REGNO))); |
| else |
| emit_insn (gen_poppsi (gen_rtx_REG (PSImode, FP_REGNO))); |
| } |
| if (!bank_switch_p (cfun->decl) && cfun->machine->intr_pushm) |
| emit_insn (gen_popm (GEN_INT (cfun->machine->intr_pushm))); |
| |
| /* The FREIT (Fast REturn from InTerrupt) instruction should be |
| generated only for M32C/M32CM targets (generate the REIT |
| instruction otherwise). */ |
| if (fast_interrupt_p (cfun->decl)) |
| { |
| /* Check if fast_attribute is set for M32C or M32CM. */ |
| if (TARGET_A24) |
| { |
| emit_jump_insn (gen_epilogue_freit ()); |
| } |
| /* If fast_interrupt attribute is set for an R8C or M16C |
| target ignore this attribute and generated REIT |
| instruction. */ |
| else |
| { |
| warning (OPT_Wattributes, |
| "%<fast_interrupt%> attribute directive ignored"); |
| emit_jump_insn (gen_epilogue_reit_16 ()); |
| } |
| } |
| else if (TARGET_A16) |
| emit_jump_insn (gen_epilogue_reit_16 ()); |
| else |
| emit_jump_insn (gen_epilogue_reit_24 ()); |
| } |
| else if (cfun->machine->use_rts) |
| emit_jump_insn (gen_epilogue_rts ()); |
| else if (TARGET_A16) |
| emit_jump_insn (gen_epilogue_exitd_16 ()); |
| else |
| emit_jump_insn (gen_epilogue_exitd_24 ()); |
| } |
| |
| void |
| m32c_emit_eh_epilogue (rtx ret_addr) |
| { |
| /* R0[R2] has the stack adjustment. R1[R3] has the address to |
| return to. We have to fudge the stack, pop everything, pop SP |
| (fudged), and return (fudged). This is actually easier to do in |
| assembler, so punt to libgcc. */ |
| emit_jump_insn (gen_eh_epilogue (ret_addr, cfun->machine->eh_stack_adjust)); |
| /* emit_clobber (gen_rtx_REG (HImode, R0L_REGNO)); */ |
| } |
| |
| /* Indicate which flags must be properly set for a given conditional. */ |
| static int |
| flags_needed_for_conditional (rtx cond) |
| { |
| switch (GET_CODE (cond)) |
| { |
| case LE: |
| case GT: |
| return FLAGS_OSZ; |
| case LEU: |
| case GTU: |
| return FLAGS_ZC; |
| case LT: |
| case GE: |
| return FLAGS_OS; |
| case LTU: |
| case GEU: |
| return FLAGS_C; |
| case EQ: |
| case NE: |
| return FLAGS_Z; |
| default: |
| return FLAGS_N; |
| } |
| } |
| |
| #define DEBUG_CMP 0 |
| |
| /* Returns true if a compare insn is redundant because it would only |
| set flags that are already set correctly. */ |
| static bool |
| m32c_compare_redundant (rtx cmp, rtx *operands) |
| { |
| int flags_needed; |
| int pflags; |
| rtx prev, pp, next; |
| rtx op0, op1; |
| #if DEBUG_CMP |
| int prev_icode, i; |
| #endif |
| |
| op0 = operands[0]; |
| op1 = operands[1]; |
| |
| #if DEBUG_CMP |
| fprintf(stderr, "\n\033[32mm32c_compare_redundant\033[0m\n"); |
| debug_rtx(cmp); |
| for (i=0; i<2; i++) |
| { |
| fprintf(stderr, "operands[%d] = ", i); |
| debug_rtx(operands[i]); |
| } |
| #endif |
| |
| next = next_nonnote_insn (cmp); |
| if (!next || !INSN_P (next)) |
| { |
| #if DEBUG_CMP |
| fprintf(stderr, "compare not followed by insn\n"); |
| debug_rtx(next); |
| #endif |
| return false; |
| } |
| if (GET_CODE (PATTERN (next)) == SET |
| && GET_CODE (XEXP ( PATTERN (next), 1)) == IF_THEN_ELSE) |
| { |
| next = XEXP (XEXP (PATTERN (next), 1), 0); |
| } |
| else if (GET_CODE (PATTERN (next)) == SET) |
| { |
| /* If this is a conditional, flags_needed will be something |
| other than FLAGS_N, which we test below. */ |
| next = XEXP (PATTERN (next), 1); |
| } |
| else |
| { |
| #if DEBUG_CMP |
| fprintf(stderr, "compare not followed by conditional\n"); |
| debug_rtx(next); |
| #endif |
| return false; |
| } |
| #if DEBUG_CMP |
| fprintf(stderr, "conditional is: "); |
| debug_rtx(next); |
| #endif |
| |
| flags_needed = flags_needed_for_conditional (next); |
| if (flags_needed == FLAGS_N) |
| { |
| #if DEBUG_CMP |
| fprintf(stderr, "compare not followed by conditional\n"); |
| debug_rtx(next); |
| #endif |
| return false; |
| } |
| |
| /* Compare doesn't set overflow and carry the same way that |
| arithmetic instructions do, so we can't replace those. */ |
| if (flags_needed & FLAGS_OC) |
| return false; |
| |
| prev = cmp; |
| do { |
| prev = prev_nonnote_insn (prev); |
| if (!prev) |
| { |
| #if DEBUG_CMP |
| fprintf(stderr, "No previous insn.\n"); |
| #endif |
| return false; |
| } |
| if (!INSN_P (prev)) |
| { |
| #if DEBUG_CMP |
| fprintf(stderr, "Previous insn is a non-insn.\n"); |
| #endif |
| return false; |
| } |
| pp = PATTERN (prev); |
| if (GET_CODE (pp) != SET) |
| { |
| #if DEBUG_CMP |
| fprintf(stderr, "Previous insn is not a SET.\n"); |
| #endif |
| return false; |
| } |
| pflags = get_attr_flags (prev); |
| |
| /* Looking up attributes of previous insns corrupted the recog |
| tables. */ |
| INSN_UID (cmp) = -1; |
| recog (PATTERN (cmp), cmp, 0); |
| |
| if (pflags == FLAGS_N |
| && reg_mentioned_p (op0, pp)) |
| { |
| #if DEBUG_CMP |
| fprintf(stderr, "intermediate non-flags insn uses op:\n"); |
| debug_rtx(prev); |
| #endif |
| return false; |
| } |
| |
| /* Check for comparisons against memory - between volatiles and |
| aliases, we just can't risk this one. */ |
| if (GET_CODE (operands[0]) == MEM |
| || GET_CODE (operands[0]) == MEM) |
| { |
| #if DEBUG_CMP |
| fprintf(stderr, "comparisons with memory:\n"); |
| debug_rtx(prev); |
| #endif |
| return false; |
| } |
| |
| /* Check for PREV changing a register that's used to compute a |
| value in CMP, even if it doesn't otherwise change flags. */ |
| if (GET_CODE (operands[0]) == REG |
| && rtx_referenced_p (SET_DEST (PATTERN (prev)), operands[0])) |
| { |
| #if DEBUG_CMP |
| fprintf(stderr, "sub-value affected, op0:\n"); |
| debug_rtx(prev); |
| #endif |
| return false; |
| } |
| if (GET_CODE (operands[1]) == REG |
| && rtx_referenced_p (SET_DEST (PATTERN (prev)), operands[1])) |
| { |
| #if DEBUG_CMP |
| fprintf(stderr, "sub-value affected, op1:\n"); |
| debug_rtx(prev); |
| #endif |
| return false; |
| } |
| |
| } while (pflags == FLAGS_N); |
| #if DEBUG_CMP |
| fprintf(stderr, "previous flag-setting insn:\n"); |
| debug_rtx(prev); |
| debug_rtx(pp); |
| #endif |
| |
| if (GET_CODE (pp) == SET |
| && GET_CODE (XEXP (pp, 0)) == REG |
| && REGNO (XEXP (pp, 0)) == FLG_REGNO |
| && GET_CODE (XEXP (pp, 1)) == COMPARE) |
| { |
| /* Adjacent cbranches must have the same operands to be |
| redundant. */ |
| rtx pop0 = XEXP (XEXP (pp, 1), 0); |
| rtx pop1 = XEXP (XEXP (pp, 1), 1); |
| #if DEBUG_CMP |
| fprintf(stderr, "adjacent cbranches\n"); |
| debug_rtx(pop0); |
| debug_rtx(pop1); |
| #endif |
| if (rtx_equal_p (op0, pop0) |
| && rtx_equal_p (op1, pop1)) |
| return true; |
| #if DEBUG_CMP |
| fprintf(stderr, "prev cmp not same\n"); |
| #endif |
| return false; |
| } |
| |
| /* Else the previous insn must be a SET, with either the source or |
| dest equal to operands[0], and operands[1] must be zero. */ |
| |
| if (!rtx_equal_p (op1, const0_rtx)) |
| { |
| #if DEBUG_CMP |
| fprintf(stderr, "operands[1] not const0_rtx\n"); |
| #endif |
| return false; |
| } |
| if (GET_CODE (pp) != SET) |
| { |
| #if DEBUG_CMP |
| fprintf (stderr, "pp not set\n"); |
| #endif |
| return false; |
| } |
| if (!rtx_equal_p (op0, SET_SRC (pp)) |
| && !rtx_equal_p (op0, SET_DEST (pp))) |
| { |
| #if DEBUG_CMP |
| fprintf(stderr, "operands[0] not found in set\n"); |
| #endif |
| return false; |
| } |
| |
| #if DEBUG_CMP |
| fprintf(stderr, "cmp flags %x prev flags %x\n", flags_needed, pflags); |
| #endif |
| if ((pflags & flags_needed) == flags_needed) |
| return true; |
| |
| return false; |
| } |
| |
| /* Return the pattern for a compare. This will be commented out if |
| the compare is redundant, else a normal pattern is returned. Thus, |
| the assembler output says where the compare would have been. */ |
| char * |
| m32c_output_compare (rtx insn, rtx *operands) |
| { |
| static char templ[] = ";cmp.b\t%1,%0"; |
| /* ^ 5 */ |
| |
| templ[5] = " bwll"[GET_MODE_SIZE(GET_MODE(operands[0]))]; |
| if (m32c_compare_redundant (insn, operands)) |
| { |
| #if DEBUG_CMP |
| fprintf(stderr, "cbranch: cmp not needed\n"); |
| #endif |
| return templ; |
| } |
| |
| #if DEBUG_CMP |
| fprintf(stderr, "cbranch: cmp needed: `%s'\n", templ + 1); |
| #endif |
| return templ + 1; |
| } |
| |
| #undef TARGET_ENCODE_SECTION_INFO |
| #define TARGET_ENCODE_SECTION_INFO m32c_encode_section_info |
| |
| /* If the frame pointer isn't used, we detect it manually. But the |
| stack pointer doesn't have as flexible addressing as the frame |
| pointer, so we always assume we have it. */ |
| |
| #undef TARGET_FRAME_POINTER_REQUIRED |
| #define TARGET_FRAME_POINTER_REQUIRED hook_bool_void_true |
| |
| /* The Global `targetm' Variable. */ |
| |
| struct gcc_target targetm = TARGET_INITIALIZER; |
| |
| #include "gt-m32c.h" |