| # Traditional Chinese Messages for libc |
| # Copyright (C) 2000, 05 Free Software Foundation, Inc. |
| # Tung-Han Hsieh <thhsieh@linux.org.tw>, 2000 |
| # Yuan-Chung Cheng <platin@ch.ntu.edu.tw>, 2000 |
| # Wei-Lun Chao <chaoweilun@pcmail.com.tw>, 2005 |
| # |
| msgid "" |
| msgstr "" |
| "Project-Id-Version: libc 2.3.3\n" |
| "POT-Creation-Date: 2004-08-05 09:16+0200\n" |
| "PO-Revision-Date: 2005-07-26 11:27+0800\n" |
| "Last-Translator: Wei-Lun Chao <chaoweilun@pcmail.com.tw>\n" |
| "Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n" |
| "MIME-Version: 1.0\n" |
| "Content-Type: text/plain; charset=UTF-8\n" |
| "Content-Transfer-Encoding: 8bit\n" |
| "Plural-Forms: nplurals=1; plural=0;\n" |
| |
| #: sysdeps/generic/siglist.h:29 stdio-common/../sysdeps/unix/siglist.c:27 |
| msgid "Hangup" |
| msgstr "掛斷" |
| |
| #: sysdeps/generic/siglist.h:30 stdio-common/../sysdeps/unix/siglist.c:28 |
| msgid "Interrupt" |
| msgstr "中斷" |
| |
| #: sysdeps/generic/siglist.h:31 stdio-common/../sysdeps/unix/siglist.c:29 |
| msgid "Quit" |
| msgstr "離開" |
| |
| #: sysdeps/generic/siglist.h:32 stdio-common/../sysdeps/unix/siglist.c:30 |
| msgid "Illegal instruction" |
| msgstr "不合法的命令" |
| |
| #: sysdeps/generic/siglist.h:33 stdio-common/../sysdeps/unix/siglist.c:31 |
| msgid "Trace/breakpoint trap" |
| msgstr "追蹤與中斷點陷阱" |
| |
| #: sysdeps/generic/siglist.h:34 |
| msgid "Aborted" |
| msgstr "已經終止" |
| |
| #: sysdeps/generic/siglist.h:35 stdio-common/../sysdeps/unix/siglist.c:34 |
| msgid "Floating point exception" |
| msgstr "浮點數出錯" |
| |
| #: sysdeps/generic/siglist.h:36 stdio-common/../sysdeps/unix/siglist.c:35 |
| msgid "Killed" |
| msgstr "已砍掉" |
| |
| #: sysdeps/generic/siglist.h:37 stdio-common/../sysdeps/unix/siglist.c:36 |
| msgid "Bus error" |
| msgstr "匯流排錯誤 (Bus error)" |
| |
| #: sysdeps/generic/siglist.h:38 stdio-common/../sysdeps/unix/siglist.c:37 |
| msgid "Segmentation fault" |
| msgstr "程式記憶體區段錯誤" |
| |
| #. TRANS Broken pipe; there is no process reading from the other end of a pipe. |
| #. TRANS Every library function that returns this error code also generates a |
| #. TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled |
| #. TRANS or blocked. Thus, your program will never actually see @code{EPIPE} |
| #. TRANS unless it has handled or blocked @code{SIGPIPE}. |
| #: sysdeps/generic/siglist.h:39 stdio-common/../sysdeps/gnu/errlist.c:351 |
| #: stdio-common/../sysdeps/unix/siglist.c:39 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:62 |
| msgid "Broken pipe" |
| msgstr "中斷的 pipe" |
| |
| #: sysdeps/generic/siglist.h:40 stdio-common/../sysdeps/unix/siglist.c:40 |
| msgid "Alarm clock" |
| msgstr "鬧鐘" |
| |
| #: sysdeps/generic/siglist.h:41 stdio-common/../sysdeps/unix/siglist.c:41 |
| msgid "Terminated" |
| msgstr "終止" |
| |
| #: sysdeps/generic/siglist.h:42 stdio-common/../sysdeps/unix/siglist.c:42 |
| msgid "Urgent I/O condition" |
| msgstr "緊急的輸出入狀態" |
| |
| #: sysdeps/generic/siglist.h:43 stdio-common/../sysdeps/unix/siglist.c:43 |
| msgid "Stopped (signal)" |
| msgstr "停止 (信號)" |
| |
| #: sysdeps/generic/siglist.h:44 stdio-common/../sysdeps/unix/siglist.c:44 |
| msgid "Stopped" |
| msgstr "停止" |
| |
| #: sysdeps/generic/siglist.h:45 stdio-common/../sysdeps/unix/siglist.c:45 |
| msgid "Continued" |
| msgstr "繼續" |
| |
| #: sysdeps/generic/siglist.h:46 stdio-common/../sysdeps/unix/siglist.c:46 |
| msgid "Child exited" |
| msgstr "子行程結束" |
| |
| #: sysdeps/generic/siglist.h:47 stdio-common/../sysdeps/unix/siglist.c:47 |
| msgid "Stopped (tty input)" |
| msgstr "停止 (tty 輸入)" |
| |
| #: sysdeps/generic/siglist.h:48 stdio-common/../sysdeps/unix/siglist.c:48 |
| msgid "Stopped (tty output)" |
| msgstr "停止 (tty 輸出)" |
| |
| #: sysdeps/generic/siglist.h:49 stdio-common/../sysdeps/unix/siglist.c:49 |
| msgid "I/O possible" |
| msgstr "I/O 可行" |
| |
| #: sysdeps/generic/siglist.h:50 stdio-common/../sysdeps/unix/siglist.c:50 |
| msgid "CPU time limit exceeded" |
| msgstr "CPU 時間上限超過了" |
| |
| #: sysdeps/generic/siglist.h:51 stdio-common/../sysdeps/unix/siglist.c:51 |
| msgid "File size limit exceeded" |
| msgstr "檔案大小超過上限" |
| |
| #: sysdeps/generic/siglist.h:52 stdio-common/../sysdeps/unix/siglist.c:52 |
| msgid "Virtual timer expired" |
| msgstr "虛擬計時器已過時取消了" |
| |
| #: sysdeps/generic/siglist.h:53 stdio-common/../sysdeps/unix/siglist.c:53 |
| msgid "Profiling timer expired" |
| msgstr "測速評估用的計時器已過時取消了" |
| |
| #: sysdeps/generic/siglist.h:54 stdio-common/../sysdeps/unix/siglist.c:54 |
| msgid "Window changed" |
| msgstr "範圍改變了" |
| |
| #: sysdeps/generic/siglist.h:55 stdio-common/../sysdeps/unix/siglist.c:56 |
| msgid "User defined signal 1" |
| msgstr "使用者定義的訊號 1" |
| |
| #: sysdeps/generic/siglist.h:56 stdio-common/../sysdeps/unix/siglist.c:57 |
| msgid "User defined signal 2" |
| msgstr "使用者定義的訊號 2" |
| |
| #: sysdeps/generic/siglist.h:60 stdio-common/../sysdeps/unix/siglist.c:33 |
| msgid "EMT trap" |
| msgstr "EMT 陷阱" |
| |
| #: sysdeps/generic/siglist.h:63 stdio-common/../sysdeps/unix/siglist.c:38 |
| msgid "Bad system call" |
| msgstr "錯誤的系統呼叫" |
| |
| #: sysdeps/generic/siglist.h:66 |
| msgid "Stack fault" |
| msgstr "堆疊錯誤" |
| |
| #: sysdeps/generic/siglist.h:69 |
| msgid "Information request" |
| msgstr "需要資料" |
| |
| #: sysdeps/generic/siglist.h:71 |
| msgid "Power failure" |
| msgstr "電源嚴重錯誤" |
| |
| #: sysdeps/generic/siglist.h:74 stdio-common/../sysdeps/unix/siglist.c:55 |
| msgid "Resource lost" |
| msgstr "資源漏失" |
| |
| #: sysdeps/mach/hurd/mips/dl-machine.c:68 |
| #: string/../sysdeps/mach/_strerror.c:57 |
| msgid "Error in unknown error system: " |
| msgstr "未知問題系統錯誤: " |
| |
| #: sysdeps/mach/hurd/mips/dl-machine.c:83 |
| #: string/../sysdeps/generic/_strerror.c:44 |
| #: string/../sysdeps/mach/_strerror.c:87 |
| msgid "Unknown error " |
| msgstr "未知的錯誤 " |
| |
| #: sysdeps/unix/sysv/linux/lddlibc4.c:64 |
| #, c-format |
| msgid "cannot open `%s'" |
| msgstr "無法開啟 `%s'" |
| |
| #: sysdeps/unix/sysv/linux/lddlibc4.c:68 |
| #, c-format |
| msgid "cannot read header from `%s'" |
| msgstr "無法從 `%s' 讀取標頭資料" |
| |
| #: iconv/iconv_charmap.c:159 iconv/iconv_prog.c:295 catgets/gencat.c:288 |
| #, c-format |
| msgid "cannot open input file `%s'" |
| msgstr "無法開啟輸入檔 `%s'" |
| |
| #: iconv/iconv_charmap.c:177 iconv/iconv_prog.c:313 |
| #, c-format |
| msgid "error while closing input `%s'" |
| msgstr "正在關閉輸入 `%s' 的時候發生錯誤" |
| |
| #: iconv/iconv_charmap.c:443 |
| #, c-format |
| msgid "illegal input sequence at position %Zd" |
| msgstr "位置 %Zd 有不合法的輸入序列" |
| |
| #: iconv/iconv_charmap.c:462 iconv/iconv_prog.c:506 |
| msgid "incomplete character or shift sequence at end of buffer" |
| msgstr "緩衝區結尾有不完全的字元或 shift sequence" |
| |
| #: iconv/iconv_charmap.c:507 iconv/iconv_charmap.c:543 iconv/iconv_prog.c:549 |
| #: iconv/iconv_prog.c:585 |
| msgid "error while reading the input" |
| msgstr "正在讀入資料的時候發生錯誤" |
| |
| #: iconv/iconv_charmap.c:525 iconv/iconv_prog.c:567 |
| msgid "unable to allocate buffer for input" |
| msgstr "無法配置輸入用的緩衝區" |
| |
| #: iconv/iconv_prog.c:61 |
| msgid "Input/Output format specification:" |
| msgstr "輸入/輸出格式設定:" |
| |
| #: iconv/iconv_prog.c:62 |
| msgid "encoding of original text" |
| msgstr "原始文字的編碼" |
| |
| #: iconv/iconv_prog.c:63 |
| msgid "encoding for output" |
| msgstr "用來輸出的編碼" |
| |
| #: iconv/iconv_prog.c:64 |
| msgid "Information:" |
| msgstr "資料:" |
| |
| #: iconv/iconv_prog.c:65 |
| msgid "list all known coded character sets" |
| msgstr "列出所有已知的編碼字元集" |
| |
| #: iconv/iconv_prog.c:66 locale/programs/localedef.c:128 |
| msgid "Output control:" |
| msgstr "輸出控制:" |
| |
| #: iconv/iconv_prog.c:67 |
| msgid "omit invalid characters from output" |
| msgstr "省略無效字元的輸出" |
| |
| #: iconv/iconv_prog.c:68 |
| msgid "output file" |
| msgstr "輸出檔案" |
| |
| #: iconv/iconv_prog.c:69 |
| msgid "suppress warnings" |
| msgstr "停止輸出警告訊息" |
| |
| #: iconv/iconv_prog.c:70 |
| msgid "print progress information" |
| msgstr "印出程序相關資訊" |
| |
| #: iconv/iconv_prog.c:75 |
| msgid "Convert encoding of given files from one encoding to another." |
| msgstr "從給定的檔案的字元編碼轉換到另一個" |
| |
| #: iconv/iconv_prog.c:79 |
| msgid "[FILE...]" |
| msgstr "[FILE...]" |
| |
| #: iconv/iconv_prog.c:201 |
| msgid "cannot open output file" |
| msgstr "無法開啟輸出檔" |
| |
| #: iconv/iconv_prog.c:243 |
| #, c-format |
| msgid "conversions from `%s' and to `%s' are not supported" |
| msgstr "不支援從 `%s' 以及到 `%s' 的轉換" |
| |
| #: iconv/iconv_prog.c:248 |
| #, c-format |
| msgid "conversion from `%s' is not supported" |
| msgstr "不支援從 `%s' 的轉換" |
| |
| #: iconv/iconv_prog.c:255 |
| #, c-format |
| msgid "conversion to `%s' is not supported" |
| msgstr "不支援到 `%s' 的轉換" |
| |
| #: iconv/iconv_prog.c:259 |
| #, c-format |
| msgid "conversion from `%s' to `%s' is not supported" |
| msgstr "不支援從 `%s' 到 `%s' 的轉換" |
| |
| #: iconv/iconv_prog.c:265 |
| msgid "failed to start conversion processing" |
| msgstr "開始轉換程序失敗" |
| |
| #: iconv/iconv_prog.c:360 |
| msgid "error while closing output file" |
| msgstr "正在關閉輸出檔案的時候發生錯誤" |
| |
| #: iconv/iconv_prog.c:409 iconv/iconvconfig.c:357 locale/programs/locale.c:279 |
| #: locale/programs/localedef.c:372 catgets/gencat.c:233 |
| #: malloc/memusagestat.c:602 debug/pcprofiledump.c:199 |
| msgid "Report bugs using the `glibcbug' script to <bugs@gnu.org>.\n" |
| msgstr "請使用 `glibcbug' 命令稿將問題回報至 <bugs@gnu.org>。\n" |
| |
| #: iconv/iconv_prog.c:423 iconv/iconvconfig.c:371 locale/programs/locale.c:292 |
| #: locale/programs/localedef.c:386 catgets/gencat.c:246 posix/getconf.c:913 |
| #: nss/getent.c:74 nscd/nscd.c:355 nscd/nscd_nischeck.c:90 elf/ldconfig.c:274 |
| #: elf/sprof.c:349 |
| #, c-format |
| msgid "" |
| "Copyright (C) %s Free Software Foundation, Inc.\n" |
| "This is free software; see the source for copying conditions. There is NO\n" |
| "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n" |
| msgstr "" |
| "版權所有 (C) %s 自由軟體基金會。\n" |
| "這是一個自由軟體;請見源始碼的授權條款。這沒有擔保;甚至也沒有專為銷\n" |
| "售或者適合某些特殊目的。\n" |
| |
| #: iconv/iconv_prog.c:428 iconv/iconvconfig.c:376 locale/programs/locale.c:297 |
| #: locale/programs/localedef.c:391 catgets/gencat.c:251 posix/getconf.c:918 |
| #: nss/getent.c:79 nscd/nscd.c:360 nscd/nscd_nischeck.c:95 elf/ldconfig.c:279 |
| #: elf/sprof.c:355 |
| #, c-format |
| msgid "Written by %s.\n" |
| msgstr "作者 %s。\n" |
| |
| #: iconv/iconv_prog.c:458 iconv/iconv_prog.c:484 |
| msgid "conversion stopped due to problem in writing the output" |
| msgstr "因寫入輸出時發生錯誤而導致轉換停止" |
| |
| #: iconv/iconv_prog.c:502 |
| #, c-format |
| msgid "illegal input sequence at position %ld" |
| msgstr "位置 %ld 有不合法的輸入序列" |
| |
| #: iconv/iconv_prog.c:510 |
| msgid "internal error (illegal descriptor)" |
| msgstr "內部錯誤 (不合法的敘述項)" |
| |
| #: iconv/iconv_prog.c:513 |
| #, c-format |
| msgid "unknown iconv() error %d" |
| msgstr "不明的 iconv() 錯誤 %d" |
| |
| #: iconv/iconv_prog.c:756 |
| msgid "" |
| "The following list contain all the coded character sets known. This does\n" |
| "not necessarily mean that all combinations of these names can be used for\n" |
| "the FROM and TO command line parameters. One coded character set can be\n" |
| "listed with several different names (aliases).\n" |
| "\n" |
| " " |
| msgstr "" |
| "以下的列表包含所有已知的編碼字集,但這不代表所有的字集名稱組合皆可用於\n" |
| "命令列的 \"來源\" 以及 \"目的\" 引數。一個編碼字集可以用幾個不同的名稱\n" |
| "來表示 (即 \"匿名\")。\n" |
| "\n" |
| " " |
| |
| #: iconv/iconvconfig.c:110 |
| msgid "Create fastloading iconv module configuration file." |
| msgstr "建立快速載入 iconv 模組的設定檔案。" |
| |
| #: iconv/iconvconfig.c:114 |
| msgid "[DIR...]" |
| msgstr "[目錄...]" |
| |
| #: iconv/iconvconfig.c:126 |
| msgid "Prefix used for all file accesses" |
| msgstr "使用於所有檔案存取時的前置文字" |
| |
| #: iconv/iconvconfig.c:327 locale/programs/localedef.c:292 |
| msgid "no output file produced because warnings were issued" |
| msgstr "因為發出過警告訊息,所以沒有製造任何輸出檔" |
| |
| #: iconv/iconvconfig.c:405 |
| msgid "while inserting in search tree" |
| msgstr "當插入於搜尋樹之中" |
| |
| #: iconv/iconvconfig.c:1204 |
| msgid "cannot generate output file" |
| msgstr "無法產生輸出檔" |
| |
| #: locale/programs/charmap-dir.c:59 |
| #, c-format |
| msgid "cannot read character map directory `%s'" |
| msgstr "無法讀取字集對照檔目錄 `%s'" |
| |
| #: locale/programs/charmap.c:136 |
| #, c-format |
| msgid "character map file `%s' not found" |
| msgstr "找不到字集對照檔 `%s'" |
| |
| #: locale/programs/charmap.c:194 |
| #, c-format |
| msgid "default character map file `%s' not found" |
| msgstr "找不到預設的字集對照檔 `%s'" |
| |
| #: locale/programs/charmap.c:257 |
| #, c-format |
| msgid "character map `%s' is not ASCII compatible, locale not ISO C compliant\n" |
| msgstr "字元對應 `%s' 不是 ASCII 相容碼,區域化資料庫不符合 ISO C\n" |
| |
| #: locale/programs/charmap.c:336 |
| #, c-format |
| msgid "%s: <mb_cur_max> must be greater than <mb_cur_min>\n" |
| msgstr "%s: <mb_cur_max> 必須大於 <mb_cur_min>\n" |
| |
| #: locale/programs/charmap.c:356 locale/programs/charmap.c:373 |
| #: locale/programs/repertoire.c:175 |
| #, c-format |
| msgid "syntax error in prolog: %s" |
| msgstr "prolog 中有語法錯誤: %s" |
| |
| #: locale/programs/charmap.c:357 |
| msgid "invalid definition" |
| msgstr "無效的定義" |
| |
| #: locale/programs/charmap.c:374 locale/programs/locfile.c:126 |
| #: locale/programs/locfile.c:153 locale/programs/repertoire.c:176 |
| msgid "bad argument" |
| msgstr "錯誤的引數" |
| |
| #: locale/programs/charmap.c:402 |
| #, c-format |
| msgid "duplicate definition of <%s>" |
| msgstr "<%s> 的定義重複了" |
| |
| #: locale/programs/charmap.c:409 |
| #, c-format |
| msgid "value for <%s> must be 1 or greater" |
| msgstr "<%s> 的值必須為 1 或者更大" |
| |
| #: locale/programs/charmap.c:421 |
| #, c-format |
| msgid "value of <%s> must be greater or equal than the value of <%s>" |
| msgstr "<%s> 的值必須等於或大於 <%s> 的值" |
| |
| #: locale/programs/charmap.c:444 locale/programs/repertoire.c:184 |
| #, c-format |
| msgid "argument to <%s> must be a single character" |
| msgstr "給 <%s> 的引數必須是一個單字元" |
| |
| #: locale/programs/charmap.c:470 |
| msgid "character sets with locking states are not supported" |
| msgstr "不支援使用 locking 狀態的字元集" |
| |
| #: locale/programs/charmap.c:497 locale/programs/charmap.c:551 |
| #: locale/programs/charmap.c:583 locale/programs/charmap.c:677 |
| #: locale/programs/charmap.c:732 locale/programs/charmap.c:773 |
| #: locale/programs/charmap.c:814 |
| #, c-format |
| msgid "syntax error in %s definition: %s" |
| msgstr "定義 %s 的語法錯誤: %s" |
| |
| #: locale/programs/charmap.c:498 locale/programs/charmap.c:678 |
| #: locale/programs/charmap.c:774 locale/programs/repertoire.c:231 |
| msgid "no symbolic name given" |
| msgstr "沒有給予符號名稱" |
| |
| #: locale/programs/charmap.c:552 |
| msgid "invalid encoding given" |
| msgstr "給予的編碼是無效的" |
| |
| #: locale/programs/charmap.c:561 |
| msgid "too few bytes in character encoding" |
| msgstr "字元定義中的位元組太少了" |
| |
| #: locale/programs/charmap.c:563 |
| msgid "too many bytes in character encoding" |
| msgstr "字元定義中的位元組太多了" |
| |
| #: locale/programs/charmap.c:585 locale/programs/charmap.c:733 |
| #: locale/programs/charmap.c:816 locale/programs/repertoire.c:297 |
| msgid "no symbolic name given for end of range" |
| msgstr "沒有給此區的最後一個字元符號名稱" |
| |
| #: locale/programs/charmap.c:609 locale/programs/locfile.c:818 |
| #: locale/programs/repertoire.c:314 |
| #, c-format |
| msgid "`%1$s' definition does not end with `END %1$s'" |
| msgstr "`%1$s' 定義沒有以 `END %1$s' 結束" |
| |
| #: locale/programs/charmap.c:642 |
| msgid "only WIDTH definitions are allowed to follow the CHARMAP definition" |
| msgstr "只有 WIDTH 定義才能直接寫在 CHARMAP 定義之後" |
| |
| #: locale/programs/charmap.c:650 locale/programs/charmap.c:713 |
| #, c-format |
| msgid "value for %s must be an integer" |
| msgstr "%s 的值必須是整數才行" |
| |
| #: locale/programs/charmap.c:841 |
| #, c-format |
| msgid "%s: error in state machine" |
| msgstr "%s: 狀態機錯誤" |
| |
| #: locale/programs/charmap.c:849 locale/programs/ld-address.c:605 |
| #: locale/programs/ld-collate.c:2650 locale/programs/ld-collate.c:3818 |
| #: locale/programs/ld-ctype.c:2225 locale/programs/ld-ctype.c:2994 |
| #: locale/programs/ld-identification.c:469 |
| #: locale/programs/ld-measurement.c:255 locale/programs/ld-messages.c:349 |
| #: locale/programs/ld-monetary.c:958 locale/programs/ld-name.c:324 |
| #: locale/programs/ld-numeric.c:392 locale/programs/ld-paper.c:258 |
| #: locale/programs/ld-telephone.c:330 locale/programs/ld-time.c:1219 |
| #: locale/programs/locfile.c:825 locale/programs/repertoire.c:325 |
| #, c-format |
| msgid "%s: premature end of file" |
| msgstr "%s: 未完成已達檔案的末尾" |
| |
| #: locale/programs/charmap.c:868 locale/programs/charmap.c:879 |
| #, c-format |
| msgid "unknown character `%s'" |
| msgstr "不明的字元 `%s'" |
| |
| #: locale/programs/charmap.c:887 |
| #, c-format |
| msgid "number of bytes for byte sequence of beginning and end of range not the same: %d vs %d" |
| msgstr "在範圍起始與結束的位元組序列中,位元組的數目並不一致: %d vs %d" |
| |
| #: locale/programs/charmap.c:991 locale/programs/ld-collate.c:2930 |
| #: locale/programs/repertoire.c:420 |
| msgid "invalid names for character range" |
| msgstr "無效的字元範圍名稱" |
| |
| #: locale/programs/charmap.c:1003 locale/programs/repertoire.c:432 |
| msgid "hexadecimal range format should use only capital characters" |
| msgstr "在表示十六進位的範圍時只能用大寫的英文字母表示" |
| |
| #: locale/programs/charmap.c:1021 |
| #, c-format |
| msgid "<%s> and <%s> are illegal names for range" |
| msgstr "<%s> 以及 <%s> 是不合法的範圍名稱" |
| |
| #: locale/programs/charmap.c:1027 |
| msgid "upper limit in range is not higher then lower limit" |
| msgstr "區域定義中的最大值沒有比最小值還要大" |
| |
| #: locale/programs/charmap.c:1085 |
| msgid "resulting bytes for range not representable." |
| msgstr "用來定義範圍的位元組無法被表述出來" |
| |
| #: locale/programs/ld-address.c:134 locale/programs/ld-collate.c:1534 |
| #: locale/programs/ld-ctype.c:421 locale/programs/ld-identification.c:134 |
| #: locale/programs/ld-measurement.c:95 locale/programs/ld-messages.c:98 |
| #: locale/programs/ld-monetary.c:194 locale/programs/ld-name.c:95 |
| #: locale/programs/ld-numeric.c:99 locale/programs/ld-paper.c:92 |
| #: locale/programs/ld-telephone.c:95 locale/programs/ld-time.c:160 |
| #, c-format |
| msgid "No definition for %s category found" |
| msgstr "找不到 %s 類別的定義" |
| |
| #: locale/programs/ld-address.c:145 locale/programs/ld-address.c:183 |
| #: locale/programs/ld-address.c:201 locale/programs/ld-address.c:228 |
| #: locale/programs/ld-address.c:290 locale/programs/ld-address.c:309 |
| #: locale/programs/ld-address.c:322 locale/programs/ld-identification.c:147 |
| #: locale/programs/ld-measurement.c:106 locale/programs/ld-monetary.c:206 |
| #: locale/programs/ld-monetary.c:250 locale/programs/ld-monetary.c:266 |
| #: locale/programs/ld-monetary.c:278 locale/programs/ld-name.c:106 |
| #: locale/programs/ld-name.c:143 locale/programs/ld-numeric.c:113 |
| #: locale/programs/ld-numeric.c:127 locale/programs/ld-paper.c:103 |
| #: locale/programs/ld-paper.c:112 locale/programs/ld-telephone.c:106 |
| #: locale/programs/ld-telephone.c:163 locale/programs/ld-time.c:176 |
| #: locale/programs/ld-time.c:197 |
| #, c-format |
| msgid "%s: field `%s' not defined" |
| msgstr "%s: 欄位 `%s' 沒有定義" |
| |
| #: locale/programs/ld-address.c:157 locale/programs/ld-address.c:209 |
| #: locale/programs/ld-address.c:235 locale/programs/ld-address.c:265 |
| #: locale/programs/ld-name.c:118 locale/programs/ld-telephone.c:118 |
| #, c-format |
| msgid "%s: field `%s' must not be empty" |
| msgstr "%s: 欄位 `%s' 不可以空白" |
| |
| #: locale/programs/ld-address.c:169 |
| #, c-format |
| msgid "%s: invalid escape `%%%c' sequence in field `%s'" |
| msgstr "%s: 不適用的跳脫序列 `%%%c', 在欄位 `%s' 中" |
| |
| #: locale/programs/ld-address.c:220 |
| #, c-format |
| msgid "%s: terminology language code `%s' not defined" |
| msgstr "%s: 術語語言編碼 `%s' 未定義" |
| |
| #: locale/programs/ld-address.c:247 locale/programs/ld-address.c:276 |
| #, c-format |
| msgid "%s: language abbreviation `%s' not defined" |
| msgstr "%s: 語言縮寫 `%s' 沒有定義" |
| |
| #: locale/programs/ld-address.c:254 locale/programs/ld-address.c:282 |
| #: locale/programs/ld-address.c:316 locale/programs/ld-address.c:328 |
| #, c-format |
| msgid "%s: `%s' value does not match `%s' value" |
| msgstr "%s: `%s' 值與 `%s' 值不符合" |
| |
| #: locale/programs/ld-address.c:301 |
| #, c-format |
| msgid "%s: numeric country code `%d' not valid" |
| msgstr "%s: 國家數字代碼 `%d' 錯誤" |
| |
| #: locale/programs/ld-address.c:497 locale/programs/ld-address.c:534 |
| #: locale/programs/ld-address.c:572 locale/programs/ld-ctype.c:2601 |
| #: locale/programs/ld-identification.c:365 |
| #: locale/programs/ld-measurement.c:222 locale/programs/ld-messages.c:302 |
| #: locale/programs/ld-monetary.c:700 locale/programs/ld-monetary.c:735 |
| #: locale/programs/ld-monetary.c:776 locale/programs/ld-name.c:281 |
| #: locale/programs/ld-numeric.c:264 locale/programs/ld-paper.c:225 |
| #: locale/programs/ld-telephone.c:289 locale/programs/ld-time.c:1108 |
| #: locale/programs/ld-time.c:1150 |
| #, c-format |
| msgid "%s: field `%s' declared more than once" |
| msgstr "%s: `%s' 欄位不只一次地宣告" |
| |
| #: locale/programs/ld-address.c:501 locale/programs/ld-address.c:539 |
| #: locale/programs/ld-identification.c:369 locale/programs/ld-messages.c:312 |
| #: locale/programs/ld-monetary.c:704 locale/programs/ld-monetary.c:739 |
| #: locale/programs/ld-name.c:285 locale/programs/ld-numeric.c:268 |
| #: locale/programs/ld-telephone.c:293 locale/programs/ld-time.c:1002 |
| #: locale/programs/ld-time.c:1071 locale/programs/ld-time.c:1113 |
| #, c-format |
| msgid "%s: unknown character in field `%s'" |
| msgstr "%s: 未知的字元在欄位 `%s' 中" |
| |
| #: locale/programs/ld-address.c:586 locale/programs/ld-collate.c:3800 |
| #: locale/programs/ld-ctype.c:2974 locale/programs/ld-identification.c:450 |
| #: locale/programs/ld-measurement.c:236 locale/programs/ld-messages.c:331 |
| #: locale/programs/ld-monetary.c:940 locale/programs/ld-name.c:306 |
| #: locale/programs/ld-numeric.c:374 locale/programs/ld-paper.c:240 |
| #: locale/programs/ld-telephone.c:312 locale/programs/ld-time.c:1201 |
| #, c-format |
| msgid "%s: incomplete `END' line" |
| msgstr "%s: 不完整的 `END' 行" |
| |
| #: locale/programs/ld-address.c:589 locale/programs/ld-collate.c:2653 |
| #: locale/programs/ld-collate.c:3802 locale/programs/ld-ctype.c:2228 |
| #: locale/programs/ld-ctype.c:2977 locale/programs/ld-identification.c:453 |
| #: locale/programs/ld-measurement.c:239 locale/programs/ld-messages.c:333 |
| #: locale/programs/ld-monetary.c:942 locale/programs/ld-name.c:308 |
| #: locale/programs/ld-numeric.c:376 locale/programs/ld-paper.c:242 |
| #: locale/programs/ld-telephone.c:314 locale/programs/ld-time.c:1203 |
| #, c-format |
| msgid "%1$s: definition does not end with `END %1$s'" |
| msgstr "%1$s: 定義並沒有以 `END %1$s' 做為結束" |
| |
| #: locale/programs/ld-address.c:596 locale/programs/ld-collate.c:523 |
| #: locale/programs/ld-collate.c:575 locale/programs/ld-collate.c:871 |
| #: locale/programs/ld-collate.c:884 locale/programs/ld-collate.c:2640 |
| #: locale/programs/ld-collate.c:3809 locale/programs/ld-ctype.c:1956 |
| #: locale/programs/ld-ctype.c:2215 locale/programs/ld-ctype.c:2799 |
| #: locale/programs/ld-ctype.c:2985 locale/programs/ld-identification.c:460 |
| #: locale/programs/ld-measurement.c:246 locale/programs/ld-messages.c:340 |
| #: locale/programs/ld-monetary.c:949 locale/programs/ld-name.c:315 |
| #: locale/programs/ld-numeric.c:383 locale/programs/ld-paper.c:249 |
| #: locale/programs/ld-telephone.c:321 locale/programs/ld-time.c:1210 |
| #, c-format |
| msgid "%s: syntax error" |
| msgstr "%s: 語法錯誤" |
| |
| #: locale/programs/ld-collate.c:398 |
| #, c-format |
| msgid "`%.*s' already defined in charmap" |
| msgstr "`%.*s' 在字集對照表中已經定義過了" |
| |
| #: locale/programs/ld-collate.c:407 |
| #, c-format |
| msgid "`%.*s' already defined in repertoire" |
| msgstr "`%.*s' 在編碼對映檔中已經被定義過了" |
| |
| #: locale/programs/ld-collate.c:414 |
| #, c-format |
| msgid "`%.*s' already defined as collating symbol" |
| msgstr "`%.*s' 已被定義為對照符號" |
| |
| #: locale/programs/ld-collate.c:421 |
| #, c-format |
| msgid "`%.*s' already defined as collating element" |
| msgstr "`%.*s' 已被定義為對照元素" |
| |
| #: locale/programs/ld-collate.c:452 locale/programs/ld-collate.c:478 |
| #, c-format |
| msgid "%s: `forward' and `backward' are mutually excluding each other" |
| msgstr "%s: `forward' 以及 `backward' 彼此互相排斥" |
| |
| #: locale/programs/ld-collate.c:462 locale/programs/ld-collate.c:488 |
| #: locale/programs/ld-collate.c:504 |
| #, c-format |
| msgid "%s: `%s' mentioned more than once in definition of weight %d" |
| msgstr "%s: `%s' 不只一次地在權重 %d 中被提到" |
| |
| #: locale/programs/ld-collate.c:560 |
| #, c-format |
| msgid "%s: too many rules; first entry only had %d" |
| msgstr "%s: 太多規則;第一個項目只包含 %d" |
| |
| #: locale/programs/ld-collate.c:596 |
| #, c-format |
| msgid "%s: not enough sorting rules" |
| msgstr "%s: 排序規則不足" |
| |
| #: locale/programs/ld-collate.c:761 |
| #, c-format |
| msgid "%s: empty weight string not allowed" |
| msgstr "%s: 空白的權重字串是不允許的" |
| |
| #: locale/programs/ld-collate.c:856 |
| #, c-format |
| msgid "%s: weights must use the same ellipsis symbol as the name" |
| msgstr "%s: 權重必須使用與名稱相同的省略符號" |
| |
| #: locale/programs/ld-collate.c:912 |
| #, c-format |
| msgid "%s: too many values" |
| msgstr "%s: 太多變數值" |
| |
| #: locale/programs/ld-collate.c:1031 locale/programs/ld-collate.c:1206 |
| #, c-format |
| msgid "order for `%.*s' already defined at %s:%Zu" |
| msgstr "`%.*s' 的順序已經在 %s:%Zu 裡面定義了" |
| |
| #: locale/programs/ld-collate.c:1081 |
| #, c-format |
| msgid "%s: the start and the end symbol of a range must stand for characters" |
| msgstr "%s: 啟始與結束符號範圍必須代表字元" |
| |
| #: locale/programs/ld-collate.c:1108 |
| #, c-format |
| msgid "%s: byte sequences of first and last character must have the same length" |
| msgstr "%s: 第一個與最後一個字元的位元組序列必須有相同的長度" |
| |
| #: locale/programs/ld-collate.c:1150 |
| #, c-format |
| msgid "%s: byte sequence of first character of sequence is not lower than that of the last character" |
| msgstr "%s: 第一個字元序列的位元組序列並沒有低於最後一個字元的位元組序列" |
| |
| #: locale/programs/ld-collate.c:1275 |
| #, c-format |
| msgid "%s: symbolic range ellipsis must not directly follow `order_start'" |
| msgstr "%s: 符號範圍的省略不可以直接在 `order_start' 之後" |
| |
| #: locale/programs/ld-collate.c:1279 |
| #, c-format |
| msgid "%s: symbolic range ellipsis must not be directly followed by `order_end'" |
| msgstr "%s: 符號範圍的省略不可以直接在 `order_end' 之前" |
| |
| #: locale/programs/ld-collate.c:1299 locale/programs/ld-ctype.c:1476 |
| #, c-format |
| msgid "`%s' and `%.*s' are not valid names for symbolic range" |
| msgstr "`%s' 和 `%.*s' 皆非符號範圍中適用的名稱" |
| |
| #: locale/programs/ld-collate.c:1348 locale/programs/ld-collate.c:3737 |
| #, c-format |
| msgid "%s: order for `%.*s' already defined at %s:%Zu" |
| msgstr "%s: `%.*s' 的順序已在 %s:%Zu 中定義" |
| |
| #: locale/programs/ld-collate.c:1357 |
| #, c-format |
| msgid "%s: `%s' must be a character" |
| msgstr "%s: `%s' 必須是一個字元" |
| |
| #: locale/programs/ld-collate.c:1550 |
| #, c-format |
| msgid "%s: `position' must be used for a specific level in all sections or none" |
| msgstr "%s: `position' 必須在所有區塊裡特定的等級中使用,否則不能使用" |
| |
| #: locale/programs/ld-collate.c:1575 |
| #, c-format |
| msgid "symbol `%s' not defined" |
| msgstr "並未定義 `%s' 符號" |
| |
| #: locale/programs/ld-collate.c:1651 locale/programs/ld-collate.c:1757 |
| #, c-format |
| msgid "symbol `%s' has the same encoding as" |
| msgstr "跟符號 `%s' 有相同的編碼: " |
| |
| #: locale/programs/ld-collate.c:1655 locale/programs/ld-collate.c:1761 |
| #, c-format |
| msgid "symbol `%s'" |
| msgstr "符號 `%s'" |
| |
| #: locale/programs/ld-collate.c:1803 |
| msgid "no definition of `UNDEFINED'" |
| msgstr "沒有找到 `UNDEFINED' 的定義" |
| |
| #: locale/programs/ld-collate.c:1832 |
| msgid "too many errors; giving up" |
| msgstr "發生太多錯誤;放棄中" |
| |
| #: locale/programs/ld-collate.c:2735 |
| #, c-format |
| msgid "%s: duplicate definition of `%s'" |
| msgstr "%s: 重複的定義 `%s'" |
| |
| #: locale/programs/ld-collate.c:2771 |
| #, c-format |
| msgid "%s: duplicate declaration of section `%s'" |
| msgstr "%s: 重複的 `%s' 區塊宣告" |
| |
| #: locale/programs/ld-collate.c:2910 |
| #, c-format |
| msgid "%s: unknown character in collating symbol name" |
| msgstr "%s: 未知的字元在對照符號名稱中" |
| |
| #: locale/programs/ld-collate.c:3042 |
| #, c-format |
| msgid "%s: unknown character in equivalent definition name" |
| msgstr "%s: 未知的字元在同義定義名稱中" |
| |
| #: locale/programs/ld-collate.c:3055 |
| #, c-format |
| msgid "%s: unknown character in equivalent definition value" |
| msgstr "%s: 未知的字元在同義定義值中" |
| |
| #: locale/programs/ld-collate.c:3065 |
| #, c-format |
| msgid "%s: unknown symbol `%s' in equivalent definition" |
| msgstr "%s: 未知的符號 `%s' 在同義定義中" |
| |
| #: locale/programs/ld-collate.c:3074 |
| msgid "error while adding equivalent collating symbol" |
| msgstr "正在加入同義對照符號時發生錯誤" |
| |
| #: locale/programs/ld-collate.c:3104 |
| #, c-format |
| msgid "duplicate definition of script `%s'" |
| msgstr "敘述 `%s' 的定義重複了" |
| |
| #: locale/programs/ld-collate.c:3152 |
| #, c-format |
| msgid "%s: unknown section name `%s'" |
| msgstr "%s: 未知的區塊名稱 `%s'" |
| |
| #: locale/programs/ld-collate.c:3180 |
| #, c-format |
| msgid "%s: multiple order definitions for section `%s'" |
| msgstr "%s: `%s' 區塊中有多個順序定義" |
| |
| #: locale/programs/ld-collate.c:3205 |
| #, c-format |
| msgid "%s: invalid number of sorting rules" |
| msgstr "%s: 不適用的排序規則數目" |
| |
| #: locale/programs/ld-collate.c:3232 |
| #, c-format |
| msgid "%s: multiple order definitions for unnamed section" |
| msgstr "%s: 未命名的區塊中有多個順序定義" |
| |
| #: locale/programs/ld-collate.c:3286 locale/programs/ld-collate.c:3414 |
| #: locale/programs/ld-collate.c:3778 |
| #, c-format |
| msgid "%s: missing `order_end' keyword" |
| msgstr "%s: 缺少 `order_end' 關鍵字" |
| |
| #: locale/programs/ld-collate.c:3347 |
| #, c-format |
| msgid "%s: order for collating symbol %.*s not yet defined" |
| msgstr "%s: 對照符號 %.*s 的順序尚未定義" |
| |
| #: locale/programs/ld-collate.c:3365 |
| #, c-format |
| msgid "%s: order for collating element %.*s not yet defined" |
| msgstr "%s: 對照元素 %.*s 的順序尚未定義" |
| |
| #: locale/programs/ld-collate.c:3376 |
| #, c-format |
| msgid "%s: cannot reorder after %.*s: symbol not known" |
| msgstr "%s: 無法重新排列在 %.*s 之後: 未知的符號" |
| |
| #: locale/programs/ld-collate.c:3428 locale/programs/ld-collate.c:3790 |
| #, c-format |
| msgid "%s: missing `reorder-end' keyword" |
| msgstr "%s: 缺少 `reorder-end' 關鍵字" |
| |
| #: locale/programs/ld-collate.c:3462 locale/programs/ld-collate.c:3662 |
| #, c-format |
| msgid "%s: section `%.*s' not known" |
| msgstr "%s: 未知的區塊 `%.*s'" |
| |
| #: locale/programs/ld-collate.c:3527 |
| #, c-format |
| msgid "%s: bad symbol <%.*s>" |
| msgstr "%s: 不當的符號 <%.*s>" |
| |
| #: locale/programs/ld-collate.c:3725 |
| #, c-format |
| msgid "%s: cannot have `%s' as end of ellipsis range" |
| msgstr "%s: 無法用 `%s' 做為省略區段的結尾" |
| |
| #: locale/programs/ld-collate.c:3774 |
| #, c-format |
| msgid "%s: empty category description not allowed" |
| msgstr "%s: 空白的類別描述是不允許的" |
| |
| #: locale/programs/ld-collate.c:3793 |
| #, c-format |
| msgid "%s: missing `reorder-sections-end' keyword" |
| msgstr "%s: 缺少 `reorder-sections-end' 關鍵字" |
| |
| #: locale/programs/ld-ctype.c:440 |
| msgid "No character set name specified in charmap" |
| msgstr "在字元對應 (charmap) 中沒有設定字集名稱" |
| |
| #: locale/programs/ld-ctype.c:469 |
| #, c-format |
| msgid "character L'\\u%0*x' in class `%s' must be in class `%s'" |
| msgstr "character L'\\u%0*x' (放在類別 `%s' 之中) 必須在類別 `%s' 裡面" |
| |
| #: locale/programs/ld-ctype.c:484 |
| #, c-format |
| msgid "character L'\\u%0*x' in class `%s' must not be in class `%s'" |
| msgstr "character L'\\u%0*x' (放在類別 `%s' 之中) 不能在類別 `%s' 裡面" |
| |
| #: locale/programs/ld-ctype.c:498 locale/programs/ld-ctype.c:556 |
| #, c-format |
| msgid "internal error in %s, line %u" |
| msgstr "%s 的第 %u 行發生內部錯誤" |
| |
| #: locale/programs/ld-ctype.c:527 |
| #, c-format |
| msgid "character '%s' in class `%s' must be in class `%s'" |
| msgstr "字元 '%s' (放在類別 `%s' 之中) 必須在類別 `%s' 裡面" |
| |
| #: locale/programs/ld-ctype.c:543 |
| #, c-format |
| msgid "character '%s' in class `%s' must not be in class `%s'" |
| msgstr "字元 '%s' (放在類別 `%s' 之中) 不能在類別 `%s' 裡面" |
| |
| #: locale/programs/ld-ctype.c:573 locale/programs/ld-ctype.c:611 |
| #, c-format |
| msgid "<SP> character not in class `%s'" |
| msgstr "<SP> 字元不在類別 `%s' 中" |
| |
| #: locale/programs/ld-ctype.c:585 locale/programs/ld-ctype.c:622 |
| #, c-format |
| msgid "<SP> character must not be in class `%s'" |
| msgstr "<SP> 字元不可以在類別 `%s' 中" |
| |
| #: locale/programs/ld-ctype.c:600 |
| msgid "character <SP> not defined in character map" |
| msgstr "字元 <SP> 在字集對照檔中沒有定義" |
| |
| #: locale/programs/ld-ctype.c:714 |
| msgid "`digit' category has not entries in groups of ten" |
| msgstr "`digit' 類別在群組 \"十\" 中沒有項目" |
| |
| #: locale/programs/ld-ctype.c:763 |
| msgid "no input digits defined and none of the standard names in the charmap" |
| msgstr "沒有定義輸入數字,在字集對照檔中也找不到相符的標準名稱" |
| |
| #: locale/programs/ld-ctype.c:828 |
| msgid "not all characters used in `outdigit' are available in the charmap" |
| msgstr "在字集對照表中無法找到某些在 `outdigit' 中用到的字元" |
| |
| #: locale/programs/ld-ctype.c:845 |
| msgid "not all characters used in `outdigit' are available in the repertoire" |
| msgstr "在編碼對映檔中無法找到某些在 `outdigit' 中用到的字元" |
| |
| #: locale/programs/ld-ctype.c:1244 |
| #, c-format |
| msgid "character class `%s' already defined" |
| msgstr "字元類別 `%s' 已經定義過了" |
| |
| #: locale/programs/ld-ctype.c:1250 |
| #, c-format |
| msgid "implementation limit: no more than %Zd character classes allowed" |
| msgstr "程式實作的限制: 不能使用超過 %Zd 個字集類別" |
| |
| #: locale/programs/ld-ctype.c:1276 |
| #, c-format |
| msgid "character map `%s' already defined" |
| msgstr "字集對照檔 `%s' 已經定義過了" |
| |
| #: locale/programs/ld-ctype.c:1282 |
| #, c-format |
| msgid "implementation limit: no more than %d character maps allowed" |
| msgstr "程式實作的限制: 不能使用超過 %d 個字集對照檔" |
| |
| #: locale/programs/ld-ctype.c:1547 locale/programs/ld-ctype.c:1672 |
| #: locale/programs/ld-ctype.c:1778 locale/programs/ld-ctype.c:2464 |
| #: locale/programs/ld-ctype.c:3460 |
| #, c-format |
| msgid "%s: field `%s' does not contain exactly ten entries" |
| msgstr "%s: `%s' 欄位沒有精確包含十個項目" |
| |
| #: locale/programs/ld-ctype.c:1575 locale/programs/ld-ctype.c:2146 |
| #, c-format |
| msgid "to-value <U%0*X> of range is smaller than from-value <U%0*X>" |
| msgstr "區域定義的結尾值 <U%0*X> 比起始值 <U%0*X> 還要小" |
| |
| #: locale/programs/ld-ctype.c:1702 |
| msgid "start and end character sequence of range must have the same length" |
| msgstr "從起始到結束之間的字元序列長度跟編碼範圍必須相同" |
| |
| #: locale/programs/ld-ctype.c:1709 |
| msgid "to-value character sequence is smaller than from-value sequence" |
| msgstr "字元序列定義的結尾值比起始值還要小" |
| |
| #: locale/programs/ld-ctype.c:2066 locale/programs/ld-ctype.c:2117 |
| msgid "premature end of `translit_ignore' definition" |
| msgstr "`translit_ignore' 定義沒有按時結束" |
| |
| #: locale/programs/ld-ctype.c:2072 locale/programs/ld-ctype.c:2123 |
| #: locale/programs/ld-ctype.c:2165 |
| msgid "syntax error" |
| msgstr "語法錯誤" |
| |
| #: locale/programs/ld-ctype.c:2296 |
| #, c-format |
| msgid "%s: syntax error in definition of new character class" |
| msgstr "%s: 在定義新字元類別時語法錯誤" |
| |
| #: locale/programs/ld-ctype.c:2311 |
| #, c-format |
| msgid "%s: syntax error in definition of new character map" |
| msgstr "%s: 在定義新字元對應時語法錯誤" |
| |
| #: locale/programs/ld-ctype.c:2486 |
| msgid "ellipsis range must be marked by two operands of same type" |
| msgstr "省略區域必須用兩個型別相同的運算元標示出來" |
| |
| #: locale/programs/ld-ctype.c:2495 |
| msgid "with symbolic name range values the absolute ellipsis `...' must not be used" |
| msgstr "用符號名稱來指定字元編碼範圍時不可以用絕對位置的省略符號 `...'" |
| |
| #: locale/programs/ld-ctype.c:2510 |
| msgid "with UCS range values one must use the hexadecimal symbolic ellipsis `..'" |
| msgstr "用來指定 UCS 值的範圍時得用十六進位表示的省略符號 `..'" |
| |
| #: locale/programs/ld-ctype.c:2524 |
| msgid "with character code range values one must use the absolute ellipsis `...'" |
| msgstr "用來指定字元編碼值的範圍時得用絕對位置的省略符號 `...'" |
| |
| #: locale/programs/ld-ctype.c:2675 |
| #, c-format |
| msgid "duplicated definition for mapping `%s'" |
| msgstr "對映 `%s' 的定義重複了" |
| |
| #: locale/programs/ld-ctype.c:2761 locale/programs/ld-ctype.c:2905 |
| #, c-format |
| msgid "%s: `translit_start' section does not end with `translit_end'" |
| msgstr "%s: `translit_start' 小節並沒有以 `translit_end' 做為結束" |
| |
| #: locale/programs/ld-ctype.c:2856 |
| #, c-format |
| msgid "%s: duplicate `default_missing' definition" |
| msgstr "%s: 重複的 `default_missing' 定義" |
| |
| #: locale/programs/ld-ctype.c:2861 |
| msgid "previous definition was here" |
| msgstr "先前的設定在此" |
| |
| #: locale/programs/ld-ctype.c:2883 |
| #, c-format |
| msgid "%s: no representable `default_missing' definition found" |
| msgstr "%s: 找不到可表示為 `default_missing' 的定義" |
| |
| #: locale/programs/ld-ctype.c:3036 |
| #, c-format |
| msgid "%s: character `%s' not defined in charmap while needed as default value" |
| msgstr "%s: 字元 `%s' 在字集對照表中沒有定義,但它是必需的預設值" |
| |
| #: locale/programs/ld-ctype.c:3041 locale/programs/ld-ctype.c:3125 |
| #: locale/programs/ld-ctype.c:3145 locale/programs/ld-ctype.c:3166 |
| #: locale/programs/ld-ctype.c:3187 locale/programs/ld-ctype.c:3208 |
| #: locale/programs/ld-ctype.c:3229 locale/programs/ld-ctype.c:3269 |
| #: locale/programs/ld-ctype.c:3290 locale/programs/ld-ctype.c:3357 |
| #, c-format |
| msgid "%s: character `%s' in charmap not representable with one byte" |
| msgstr "%s: 字集對照表中的字元 `%s' 無法表示為單一位元組" |
| |
| #: locale/programs/ld-ctype.c:3120 locale/programs/ld-ctype.c:3140 |
| #: locale/programs/ld-ctype.c:3182 locale/programs/ld-ctype.c:3203 |
| #: locale/programs/ld-ctype.c:3224 locale/programs/ld-ctype.c:3264 |
| #: locale/programs/ld-ctype.c:3285 locale/programs/ld-ctype.c:3352 |
| #: locale/programs/ld-ctype.c:3394 locale/programs/ld-ctype.c:3419 |
| #, c-format |
| msgid "%s: character `%s' not defined while needed as default value" |
| msgstr "%s: 字元 `%s' 沒有定義,但它是必需的預設值" |
| |
| #: locale/programs/ld-ctype.c:3161 |
| #, c-format |
| msgid "character `%s' not defined while needed as default value" |
| msgstr "必須用來作為預設值的字元 `%s' 沒有被定義到" |
| |
| #: locale/programs/ld-ctype.c:3401 locale/programs/ld-ctype.c:3426 |
| #, c-format |
| msgid "%s: character `%s' needed as default value not representable with one byte" |
| msgstr "%s: 做為預設值所需的字元 `%s' 無法表示為單一位元組" |
| |
| #: locale/programs/ld-ctype.c:3481 |
| msgid "no output digits defined and none of the standard names in the charmap" |
| msgstr "沒有定義輸出數字,在字集對照檔中也找不到相符的標準名稱" |
| |
| #: locale/programs/ld-ctype.c:3772 |
| #, c-format |
| msgid "%s: transliteration data from locale `%s' not available" |
| msgstr "%s: 語區資料`%s' 的音譯資料不存在" |
| |
| #: locale/programs/ld-ctype.c:3868 |
| #, c-format |
| msgid "%s: table for class \"%s\": %lu bytes\n" |
| msgstr "%s: 類別 \"%s\" 表格: %lu 位元組\n" |
| |
| #: locale/programs/ld-ctype.c:3937 |
| #, c-format |
| msgid "%s: table for map \"%s\": %lu bytes\n" |
| msgstr "%s: 對映表 \"%s\" 表格: %lu 位元組\n" |
| |
| #: locale/programs/ld-ctype.c:4070 |
| #, c-format |
| msgid "%s: table for width: %lu bytes\n" |
| msgstr "%s: 寬度表格: %lu 位元組\n" |
| |
| #: locale/programs/ld-identification.c:171 |
| #, c-format |
| msgid "%s: no identification for category `%s'" |
| msgstr "%s: 類別 `%s' 沒有認證" |
| |
| #: locale/programs/ld-identification.c:436 |
| #, c-format |
| msgid "%s: duplicate category version definition" |
| msgstr "%s: 重複的類別版本定義" |
| |
| #: locale/programs/ld-measurement.c:114 |
| #, c-format |
| msgid "%s: invalid value for field `%s'" |
| msgstr "%s: 在欄位 `%s' 中的值不適用" |
| |
| #: locale/programs/ld-messages.c:115 locale/programs/ld-messages.c:149 |
| #, c-format |
| msgid "%s: field `%s' undefined" |
| msgstr "%s: 欄位 `%s' 沒有定義" |
| |
| #: locale/programs/ld-messages.c:122 locale/programs/ld-messages.c:156 |
| #, c-format |
| msgid "%s: value for field `%s' must not be an empty string" |
| msgstr "%s: 欄位 `%s' 值不可以是空字串" |
| |
| #: locale/programs/ld-messages.c:138 locale/programs/ld-messages.c:172 |
| #, c-format |
| msgid "%s: no correct regular expression for field `%s': %s" |
| msgstr "%s: 沒有給欄位 `%s' 正確的常規表示式: %s" |
| |
| #: locale/programs/ld-monetary.c:224 |
| #, c-format |
| msgid "%s: value of field `int_curr_symbol' has wrong length" |
| msgstr "%s: 欄位 `int_curr_symbol' 值的長度錯誤" |
| |
| #: locale/programs/ld-monetary.c:237 |
| #, c-format |
| msgid "%s: value of field `int_curr_symbol' does not correspond to a valid name in ISO 4217" |
| msgstr "%s: 欄位 `int_curr_symbol' 值並不是 ISO 4217 中合法的名稱" |
| |
| #: locale/programs/ld-monetary.c:256 locale/programs/ld-numeric.c:119 |
| #, c-format |
| msgid "%s: value for field `%s' must not be the empty string" |
| msgstr "%s: 欄位 `%s' 值不可以是空字串" |
| |
| #: locale/programs/ld-monetary.c:284 locale/programs/ld-monetary.c:314 |
| #, c-format |
| msgid "%s: value for field `%s' must be in range %d...%d" |
| msgstr "%s: 欄位 `%s' 的值必須在範圍 %d...%d" |
| |
| #: locale/programs/ld-monetary.c:746 locale/programs/ld-numeric.c:275 |
| #, c-format |
| msgid "%s: value for field `%s' must be a single character" |
| msgstr "%s: 欄位 `%s' 的值必須是個單一字元" |
| |
| #: locale/programs/ld-monetary.c:843 locale/programs/ld-numeric.c:319 |
| #, c-format |
| msgid "%s: `-1' must be last entry in `%s' field" |
| msgstr "%s: `-1' 在 `%s' 欄位中必須是最後一個項目" |
| |
| #: locale/programs/ld-monetary.c:865 locale/programs/ld-numeric.c:340 |
| #, c-format |
| msgid "%s: values for field `%s' must be smaller than 127" |
| msgstr "%s: 欄位 `%s' 的值必須小於 127" |
| |
| #: locale/programs/ld-monetary.c:908 |
| msgid "conversion rate value cannot be zero" |
| msgstr "轉換率的值不可以是零" |
| |
| #: locale/programs/ld-name.c:130 locale/programs/ld-telephone.c:127 |
| #: locale/programs/ld-telephone.c:150 |
| #, c-format |
| msgid "%s: invalid escape sequence in field `%s'" |
| msgstr "%s: 在欄位 `%s' 中的跳脫序列不適用" |
| |
| #: locale/programs/ld-time.c:248 |
| #, c-format |
| msgid "%s: direction flag in string %Zd in `era' field is not '+' nor '-'" |
| msgstr "%s: 在 `era' 欄位的字串 %Zd 中,方向旗標既不是 '+' 也不是 '-'" |
| |
| #: locale/programs/ld-time.c:259 |
| #, c-format |
| msgid "%s: direction flag in string %Zd in `era' field is not a single character" |
| msgstr "%s: 在 `era' 欄位的字串 %Zd 中,方向旗標不是一個單一字元" |
| |
| #: locale/programs/ld-time.c:272 |
| #, c-format |
| msgid "%s: invalid number for offset in string %Zd in `era' field" |
| msgstr "%s: 在 `era' 欄位、字串 %Zd 中的位移數字不適用" |
| |
| #: locale/programs/ld-time.c:280 |
| #, c-format |
| msgid "%s: garbage at end of offset value in string %Zd in `era' field" |
| msgstr "%s: 無用的資料,在 `era' 欄位、字串 %Zd 中末尾的位移值" |
| |
| #: locale/programs/ld-time.c:331 |
| #, c-format |
| msgid "%s: invalid starting date in string %Zd in `era' field" |
| msgstr "%s: 在 `era' 欄位、字串 %Zd 中的起始日期不適用" |
| |
| #: locale/programs/ld-time.c:340 |
| #, c-format |
| msgid "%s: garbage at end of starting date in string %Zd in `era' field " |
| msgstr "%s: 無用的資料,在 `era' 欄位、字串 %Zd 中末尾的起始日期" |
| |
| #: locale/programs/ld-time.c:359 |
| #, c-format |
| msgid "%s: starting date is invalid in string %Zd in `era' field" |
| msgstr "%s: 在 `era' 區域的字串 %Zd 中的啟始日期是不適用的" |
| |
| #: locale/programs/ld-time.c:408 |
| #, c-format |
| msgid "%s: invalid stopping date in string %Zd in `era' field" |
| msgstr "%s: 在 `era' 欄位、字串 %Zd 中的結束日期不適用" |
| |
| #: locale/programs/ld-time.c:417 |
| #, c-format |
| msgid "%s: garbage at end of stopping date in string %Zd in `era' field" |
| msgstr "%s: 無用的資料,在 `era' 區域、字串 %Zd 中末尾的結束日期" |
| |
| #: locale/programs/ld-time.c:436 |
| #, c-format |
| msgid "%s: stopping date is invalid in string %Zd in `era' field" |
| msgstr "%s: 在 `era' 區域的字串 %Zd 中的結束日期是不適用的" |
| |
| #: locale/programs/ld-time.c:445 |
| #, c-format |
| msgid "%s: missing era name in string %Zd in `era' field" |
| msgstr "%s: 缺少 era 名稱,在 `era' 欄位、字串 %Zd 中" |
| |
| #: locale/programs/ld-time.c:457 |
| #, c-format |
| msgid "%s: missing era format in string %Zd in `era' field" |
| msgstr "%s: 缺少 era 格式,在 `era' 欄位、字串 %Zd 中" |
| |
| #: locale/programs/ld-time.c:486 |
| #, c-format |
| msgid "%s: third operand for value of field `%s' must not be larger than %d" |
| msgstr "%s: 欄位 `%s' 值的第三個運算元不可以比 %d 大" |
| |
| #: locale/programs/ld-time.c:494 locale/programs/ld-time.c:502 |
| #, c-format |
| msgid "%s: values of field `%s' must not be larger than %d" |
| msgstr "%s: 欄位 `%s' 的值不可以大於 %d" |
| |
| #: locale/programs/ld-time.c:510 |
| #, c-format |
| msgid "%s: values for field `%s' must not be larger than %d" |
| msgstr "%s: 欄位 `%s' 的值不可以大於 %d" |
| |
| #: locale/programs/ld-time.c:986 |
| #, c-format |
| msgid "%s: too few values for field `%s'" |
| msgstr "%s: 欄位 `%s' 中的值太少" |
| |
| #: locale/programs/ld-time.c:1031 |
| msgid "extra trailing semicolon" |
| msgstr "多出的尾端分號" |
| |
| #: locale/programs/ld-time.c:1034 |
| #, c-format |
| msgid "%s: too many values for field `%s'" |
| msgstr "%s: 欄位 `%s' 中的值太多" |
| |
| #: locale/programs/linereader.c:130 |
| msgid "trailing garbage at end of line" |
| msgstr "行結尾的無用字元" |
| |
| #: locale/programs/linereader.c:304 |
| msgid "garbage at end of number" |
| msgstr "號碼結束位置的無用資料" |
| |
| #: locale/programs/linereader.c:416 |
| msgid "garbage at end of character code specification" |
| msgstr "字元編碼設定結束位置的無用資料" |
| |
| #: locale/programs/linereader.c:502 |
| msgid "unterminated symbolic name" |
| msgstr "沒有結尾的符號名稱" |
| |
| #: locale/programs/linereader.c:566 catgets/gencat.c:1195 |
| msgid "invalid escape sequence" |
| msgstr "無效的跳脫序列" |
| |
| #: locale/programs/linereader.c:629 |
| msgid "illegal escape sequence at end of string" |
| msgstr "字串結尾有不合法的跳脫序列" |
| |
| #: locale/programs/linereader.c:633 locale/programs/linereader.c:861 |
| msgid "unterminated string" |
| msgstr "沒有結尾的字串" |
| |
| #: locale/programs/linereader.c:675 |
| msgid "non-symbolic character value should not be used" |
| msgstr "非符號性的字元值不應該被使用才對" |
| |
| #: locale/programs/linereader.c:822 |
| #, c-format |
| msgid "symbol `%.*s' not in charmap" |
| msgstr "符號 `%.*s' 並不在字集對照表中" |
| |
| #: locale/programs/linereader.c:843 |
| #, c-format |
| msgid "symbol `%.*s' not in repertoire map" |
| msgstr "符號 `%.*s' 並不在編碼對映檔中" |
| |
| #: locale/programs/locale.c:75 |
| msgid "System information:" |
| msgstr "系統相關資訊:" |
| |
| #: locale/programs/locale.c:77 |
| msgid "Write names of available locales" |
| msgstr "寫出存在的語區資料名稱" |
| |
| #: locale/programs/locale.c:79 |
| msgid "Write names of available charmaps" |
| msgstr "寫出存在的字集對照表名稱" |
| |
| #: locale/programs/locale.c:80 |
| msgid "Modify output format:" |
| msgstr "修改輸出格式:" |
| |
| #: locale/programs/locale.c:81 |
| msgid "Write names of selected categories" |
| msgstr "寫出選取的類別名稱" |
| |
| #: locale/programs/locale.c:82 |
| msgid "Write names of selected keywords" |
| msgstr "寫出選取的關鍵字名稱" |
| |
| #: locale/programs/locale.c:83 |
| msgid "Print more information" |
| msgstr "印出更多的資訊" |
| |
| #: locale/programs/locale.c:88 |
| msgid "Get locale-specific information." |
| msgstr "取得語區資料特定的資訊" |
| |
| #: locale/programs/locale.c:91 |
| msgid "" |
| "NAME\n" |
| "[-a|-m]" |
| msgstr "" |
| "名稱\n" |
| "[-a|-m]" |
| |
| #: locale/programs/locale.c:195 |
| msgid "Cannot set LC_CTYPE to default locale" |
| msgstr "無法將 LC_CTYPE 設置為預設的語區" |
| |
| #: locale/programs/locale.c:197 |
| msgid "Cannot set LC_MESSAGES to default locale" |
| msgstr "無法將 LC_MESSAGES 設置為預設的語區" |
| |
| #: locale/programs/locale.c:210 |
| msgid "Cannot set LC_COLLATE to default locale" |
| msgstr "無法將 LC_COLLATE 設置為預設的語區" |
| |
| #: locale/programs/locale.c:226 |
| msgid "Cannot set LC_ALL to default locale" |
| msgstr "無法將 LC_ALL 設置為預設的語區" |
| |
| #: locale/programs/locale.c:517 |
| msgid "while preparing output" |
| msgstr "在準備輸出時" |
| |
| #: locale/programs/localedef.c:121 |
| msgid "Input Files:" |
| msgstr "輸入檔:" |
| |
| #: locale/programs/localedef.c:123 |
| msgid "Symbolic character names defined in FILE" |
| msgstr "符號字元的名稱定義在檔案 FILE 中" |
| |
| #: locale/programs/localedef.c:124 |
| msgid "Source definitions are found in FILE" |
| msgstr "原始資料定義在檔案 FILE 中" |
| |
| #: locale/programs/localedef.c:126 |
| msgid "FILE contains mapping from symbolic names to UCS4 values" |
| msgstr "檔案 FILE 內含符號名與 UCS4 編碼之間的對映" |
| |
| #: locale/programs/localedef.c:130 |
| msgid "Create output even if warning messages were issued" |
| msgstr "產生輸出即使是有警告訊息" |
| |
| #: locale/programs/localedef.c:131 |
| msgid "Create old-style tables" |
| msgstr "產生舊格式的表格" |
| |
| #: locale/programs/localedef.c:132 |
| msgid "Optional output file prefix" |
| msgstr "可有可無的輸出檔路徑" |
| |
| #: locale/programs/localedef.c:133 |
| msgid "Be strictly POSIX conform" |
| msgstr "嚴格遵從 POSIX" |
| |
| #: locale/programs/localedef.c:135 |
| msgid "Suppress warnings and information messages" |
| msgstr "忽略警告與提示訊息" |
| |
| #: locale/programs/localedef.c:136 |
| msgid "Print more messages" |
| msgstr "印出更多的訊息" |
| |
| #: locale/programs/localedef.c:137 |
| msgid "Archive control:" |
| msgstr "保存檔控制:" |
| |
| #: locale/programs/localedef.c:139 |
| msgid "Don't add new data to archive" |
| msgstr "不要加入新資料到保存檔" |
| |
| #: locale/programs/localedef.c:141 |
| msgid "Add locales named by parameters to archive" |
| msgstr "藉由參數加入語區名稱到保存檔" |
| |
| #: locale/programs/localedef.c:142 |
| msgid "Replace existing archive content" |
| msgstr "替換已有的保存檔內容" |
| |
| #: locale/programs/localedef.c:144 |
| msgid "Remove locales named by parameters from archive" |
| msgstr "藉由參數從保存檔中刪除語區名稱" |
| |
| #: locale/programs/localedef.c:145 |
| msgid "List content of archive" |
| msgstr "列出保存檔的內容" |
| |
| #: locale/programs/localedef.c:147 |
| msgid "locale.alias file to consult when making archive" |
| msgstr "製作保存檔時查閱 locale.alias 檔案" |
| |
| #: locale/programs/localedef.c:152 |
| msgid "Compile locale specification" |
| msgstr "編譯語區資料規格" |
| |
| #: locale/programs/localedef.c:155 |
| msgid "" |
| "NAME\n" |
| "[--add-to-archive|--delete-from-archive] FILE...\n" |
| "--list-archive [FILE]" |
| msgstr "" |
| "NAME\n" |
| "[--add-to-archive|--delete-from-archive] 檔案...\n" |
| "--list-archive [檔案]" |
| |
| #: locale/programs/localedef.c:233 |
| msgid "cannot create directory for output files" |
| msgstr "無法為輸出檔建立目錄" |
| |
| #: locale/programs/localedef.c:244 |
| msgid "FATAL: system does not define `_POSIX2_LOCALEDEF'" |
| msgstr "嚴重錯誤: 系統沒有定義 `_POSIX2_LOCALEDEF'" |
| |
| #: locale/programs/localedef.c:258 locale/programs/localedef.c:274 |
| #: locale/programs/localedef.c:599 locale/programs/localedef.c:619 |
| #, c-format |
| msgid "cannot open locale definition file `%s'" |
| msgstr "無法開啟語區資料定義檔 `%s'" |
| |
| #: locale/programs/localedef.c:286 |
| #, c-format |
| msgid "cannot write output files to `%s'" |
| msgstr "無法將輸出檔案寫入 `%s'" |
| |
| #: locale/programs/localedef.c:367 |
| #, c-format |
| msgid "" |
| "System's directory for character maps : %s\n" |
| " repertoire maps: %s\n" |
| " locale path : %s\n" |
| "%s" |
| msgstr "" |
| "系統的字集對照檔 (character maps) 目錄 : %s\n" |
| " 編碼對映檔 (repertoire maps) 目錄 : %s\n" |
| " 語區資料路徑 : %s\n" |
| "%s" |
| |
| #: locale/programs/localedef.c:567 |
| msgid "circular dependencies between locale definitions" |
| msgstr "有語區資料在定義時發生循環相關的情況" |
| |
| #: locale/programs/localedef.c:573 |
| #, c-format |
| msgid "cannot add already read locale `%s' a second time" |
| msgstr " `%s' 語區資料已經用過,不能重複加入" |
| |
| #: locale/programs/locarchive.c:89 locale/programs/locarchive.c:259 |
| msgid "cannot create temporary file" |
| msgstr "無法產生暫時檔" |
| |
| #: locale/programs/locarchive.c:118 locale/programs/locarchive.c:305 |
| msgid "cannot initialize archive file" |
| msgstr "無法起始保存檔" |
| |
| #: locale/programs/locarchive.c:125 locale/programs/locarchive.c:312 |
| msgid "cannot resize archive file" |
| msgstr "無法改變保存檔大小" |
| |
| #: locale/programs/locarchive.c:134 locale/programs/locarchive.c:321 |
| #: locale/programs/locarchive.c:511 |
| msgid "cannot map archive header" |
| msgstr "無法註記保存檔表頭" |
| |
| #: locale/programs/locarchive.c:156 |
| msgid "failed to create new locale archive" |
| msgstr "無法建立新的語區保存檔" |
| |
| #: locale/programs/locarchive.c:168 |
| msgid "cannot change mode of new locale archive" |
| msgstr "無法改變新的語區資料保存檔狀態" |
| |
| #: locale/programs/locarchive.c:253 |
| msgid "cannot map locale archive file" |
| msgstr "無法映射語區資料保存檔" |
| |
| #: locale/programs/locarchive.c:329 |
| msgid "cannot lock new archive" |
| msgstr "無法鎖定新的保存檔" |
| |
| #: locale/programs/locarchive.c:380 |
| msgid "cannot extend locale archive file" |
| msgstr "無法延展語區資料保存檔" |
| |
| #: locale/programs/locarchive.c:389 |
| msgid "cannot change mode of resized locale archive" |
| msgstr "無法改變已變更大小的語區資料保存檔狀態" |
| |
| #: locale/programs/locarchive.c:397 |
| msgid "cannot rename new archive" |
| msgstr "無法更改新保存檔名稱" |
| |
| #: locale/programs/locarchive.c:450 |
| #, c-format |
| msgid "cannot open locale archive \"%s\"" |
| msgstr "無法開啟語區資料保存檔 \"%s\"" |
| |
| #: locale/programs/locarchive.c:455 |
| #, c-format |
| msgid "cannot stat locale archive \"%s\"" |
| msgstr "無法統計語區資料保存檔 \"%s\"" |
| |
| #: locale/programs/locarchive.c:474 |
| #, c-format |
| msgid "cannot lock locale archive \"%s\"" |
| msgstr "無法鎖定語區資料保存檔 \"%s\"" |
| |
| #: locale/programs/locarchive.c:497 |
| msgid "cannot read archive header" |
| msgstr "無法讀取保存檔表頭資料" |
| |
| #: locale/programs/locarchive.c:557 |
| #, c-format |
| msgid "locale '%s' already exists" |
| msgstr "語區資料 `%s' 已經存在" |
| |
| #: locale/programs/locarchive.c:788 locale/programs/locarchive.c:803 |
| #: locale/programs/locarchive.c:815 locale/programs/locarchive.c:827 |
| #: locale/programs/locfile.c:343 |
| msgid "cannot add to locale archive" |
| msgstr "無法加入語區資料保存檔" |
| |
| #: locale/programs/locarchive.c:982 |
| #, c-format |
| msgid "locale alias file `%s' not found" |
| msgstr "找不到語區資料別名檔 `%s'" |
| |
| #: locale/programs/locarchive.c:1126 |
| #, c-format |
| msgid "Adding %s\n" |
| msgstr "加入 %s 中\n" |
| |
| #: locale/programs/locarchive.c:1132 |
| #, c-format |
| msgid "stat of \"%s\" failed: %s: ignored" |
| msgstr "取得 \"%s\" 的資訊時失敗: %s: 已忽略" |
| |
| #: locale/programs/locarchive.c:1138 |
| #, c-format |
| msgid "\"%s\" is no directory; ignored" |
| msgstr "\"%s\" 並非目錄; 已忽略" |
| |
| #: locale/programs/locarchive.c:1145 |
| #, c-format |
| msgid "cannot open directory \"%s\": %s: ignored" |
| msgstr "無法開啟目錄 \"%s\": %s: 已忽略" |
| |
| #: locale/programs/locarchive.c:1217 |
| #, c-format |
| msgid "incomplete set of locale files in \"%s\"" |
| msgstr "不完整的一組語區資料檔案存在於 \"%s\" 之中" |
| |
| #: locale/programs/locarchive.c:1281 |
| #, c-format |
| msgid "cannot read all files in \"%s\": ignored" |
| msgstr "無法讀取 \"%s\" 中的所有檔案: 已忽略" |
| |
| #: locale/programs/locarchive.c:1351 |
| #, c-format |
| msgid "locale \"%s\" not in archive" |
| msgstr "語區資料 \"%s\" 不在保存檔中" |
| |
| #: locale/programs/locfile.c:132 |
| #, c-format |
| msgid "argument to `%s' must be a single character" |
| msgstr "給 `%s' 的引數必須是一個單字元" |
| |
| #: locale/programs/locfile.c:251 |
| msgid "syntax error: not inside a locale definition section" |
| msgstr "語法錯誤: 不能在語區資料定義區塊裡面使用" |
| |
| #: locale/programs/locfile.c:625 |
| #, c-format |
| msgid "cannot open output file `%s' for category `%s'" |
| msgstr "無法開啟輸出檔 `%s' 供類別 `%s' 使用" |
| |
| #: locale/programs/locfile.c:649 |
| #, c-format |
| msgid "failure while writing data for category `%s'" |
| msgstr "正在為類別 `%s' 寫入資料時發生錯誤" |
| |
| #: locale/programs/locfile.c:745 |
| #, c-format |
| msgid "cannot create output file `%s' for category `%s'" |
| msgstr "無法建立輸出檔 `%s' 供類別 `%s' 使用" |
| |
| #: locale/programs/locfile.c:781 |
| msgid "expect string argument for `copy'" |
| msgstr "`copy' 的參數應該是字串才對" |
| |
| #: locale/programs/locfile.c:785 |
| msgid "locale name should consist only of portable characters" |
| msgstr "語區資料的名稱應該用泛用字元 (portable characters) 組成" |
| |
| #: locale/programs/locfile.c:804 |
| msgid "no other keyword shall be specified when `copy' is used" |
| msgstr "使用 `copy' 的時候不應該再用到任何其他的關鍵字了" |
| |
| #: locale/programs/repertoire.c:230 locale/programs/repertoire.c:271 |
| #: locale/programs/repertoire.c:296 |
| #, c-format |
| msgid "syntax error in repertoire map definition: %s" |
| msgstr "編碼對映檔中的定義有語法錯誤: %s" |
| |
| #: locale/programs/repertoire.c:272 |
| msgid "no <Uxxxx> or <Uxxxxxxxx> value given" |
| msgstr "沒有給定 <Uxxxx> 或 <Uxxxxxxxx> 的值" |
| |
| #: locale/programs/repertoire.c:332 |
| msgid "cannot save new repertoire map" |
| msgstr "無法儲存新的編碼對映檔" |
| |
| #: locale/programs/repertoire.c:343 |
| #, c-format |
| msgid "repertoire map file `%s' not found" |
| msgstr "找不到編碼對映檔 `%s'" |
| |
| #: locale/programs/repertoire.c:450 |
| #, c-format |
| msgid "<%s> and <%s> are invalid names for range" |
| msgstr "<%s> 以及 <%s> 是不適用的範圍名稱" |
| |
| #: locale/programs/repertoire.c:457 |
| msgid "upper limit in range is not smaller then lower limit" |
| msgstr "區域定義中的最大值沒有比最小值還要小" |
| |
| #: locale/programs/xmalloc.c:70 malloc/obstack.c:505 malloc/obstack.c:508 |
| #: posix/getconf.c:1007 |
| msgid "memory exhausted" |
| msgstr "記憶體耗盡" |
| |
| #: assert/assert-perr.c:57 |
| #, c-format |
| msgid "%s%s%s:%u: %s%sUnexpected error: %s.\n" |
| msgstr "%s%s%s:%u: %s%s無法預料的錯誤: %s。\n" |
| |
| #: assert/assert.c:56 |
| #, c-format |
| msgid "%s%s%s:%u: %s%sAssertion `%s' failed.\n" |
| msgstr "%s%s%s:%u: %s%sAssertion `%s' 失敗。\n" |
| |
| #: intl/tst-codeset.c:40 intl/tst-codeset.c:50 |
| msgid "cheese" |
| msgstr "請微笑" |
| |
| #: intl/tst-gettext2.c:37 |
| msgid "First string for testing." |
| msgstr "第一個字串接受測試。" |
| |
| #: intl/tst-gettext2.c:38 |
| msgid "Another string for testing." |
| msgstr "另一個受測試的字串。" |
| |
| #: catgets/gencat.c:111 catgets/gencat.c:115 nscd/nscd.c:88 |
| msgid "NAME" |
| msgstr "名稱" |
| |
| #: catgets/gencat.c:112 |
| msgid "Create C header file NAME containing symbol definitions" |
| msgstr "產生的 C 標頭檔名內含符號定義" |
| |
| #: catgets/gencat.c:114 |
| msgid "Do not use existing catalog, force new output file" |
| msgstr "不使用現存的 catalog, 強制使用新的輸出檔" |
| |
| #: catgets/gencat.c:115 |
| msgid "Write output to file NAME" |
| msgstr "將輸出寫到檔案 NAME 中" |
| |
| #: catgets/gencat.c:120 |
| msgid "" |
| "Generate message catalog.If INPUT-FILE is -, input is read from standard input. If OUTPUT-FILE\n" |
| "is -, output is written to standard output.\n" |
| msgstr "" |
| "產生訊息 catelog。\\v如果輸入檔名是 -, 將從標準輸入讀取輸入。\n" |
| "如果輸出檔名是 -, 則輸出將寫到標準輸出去。\n" |
| |
| #: catgets/gencat.c:125 |
| msgid "" |
| "-o OUTPUT-FILE [INPUT-FILE]...\n" |
| "[OUTPUT-FILE [INPUT-FILE]...]" |
| msgstr "" |
| "-o 輸出檔案名稱 [輸入檔案名稱]...\n" |
| "[輸出檔案名稱 [輸入檔案名稱]...]" |
| |
| #: catgets/gencat.c:282 |
| msgid "*standard input*" |
| msgstr "*標準輸入*" |
| |
| #: catgets/gencat.c:417 catgets/gencat.c:494 |
| msgid "illegal set number" |
| msgstr "不合法的集合編號" |
| |
| #: catgets/gencat.c:444 |
| msgid "duplicate set definition" |
| msgstr "複製集合定義" |
| |
| #: catgets/gencat.c:446 catgets/gencat.c:623 catgets/gencat.c:677 |
| msgid "this is the first definition" |
| msgstr "此為第一個定義" |
| |
| #: catgets/gencat.c:522 |
| #, c-format |
| msgid "unknown set `%s'" |
| msgstr "不明的集合 `%s'" |
| |
| #: catgets/gencat.c:563 |
| msgid "invalid quote character" |
| msgstr "不適用的引用字元" |
| |
| #: catgets/gencat.c:576 |
| #, c-format |
| msgid "unknown directive `%s': line ignored" |
| msgstr "不明的指令 `%s': 此行忽略" |
| |
| #: catgets/gencat.c:621 |
| msgid "duplicated message number" |
| msgstr "重複的訊息編號" |
| |
| #: catgets/gencat.c:674 |
| msgid "duplicated message identifier" |
| msgstr "重複的訊息識別符號" |
| |
| #: catgets/gencat.c:731 |
| msgid "invalid character: message ignored" |
| msgstr "不適用的字元: 忽略此訊息" |
| |
| #: catgets/gencat.c:774 |
| msgid "invalid line" |
| msgstr "無效的輸入列" |
| |
| #: catgets/gencat.c:828 |
| msgid "malformed line ignored" |
| msgstr "忽略奇怪的行" |
| |
| #: catgets/gencat.c:992 catgets/gencat.c:1033 |
| #, c-format |
| msgid "cannot open output file `%s'" |
| msgstr "無法開啟輸出檔 `%s'" |
| |
| #: catgets/gencat.c:1217 |
| msgid "unterminated message" |
| msgstr "沒有結尾的訊息" |
| |
| #: catgets/gencat.c:1241 |
| msgid "while opening old catalog file" |
| msgstr "在開啟舊的類別檔案時" |
| |
| #: catgets/gencat.c:1332 |
| msgid "conversion modules not available" |
| msgstr "轉換模組不存在" |
| |
| #: catgets/gencat.c:1358 |
| msgid "cannot determine escape character" |
| msgstr "無法決定跳脫 (escape) 字元" |
| |
| #: stdlib/../sysdeps/unix/sysv/linux/ia64/makecontext.c:63 |
| #, c-format |
| msgid "makecontext: does not know how to handle more than 8 arguments\n" |
| msgstr "makecontext: 不知要如何處理超過八個引數\n" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:12 posix/regcomp.c:147 |
| #: nis/nis_error.c:29 nis/ypclnt.c:778 nis/ypclnt.c:852 |
| msgid "Success" |
| msgstr "成功" |
| |
| #. TRANS Operation not permitted; only the owner of the file (or other resource) |
| #. TRANS or processes with special privileges can perform the operation. |
| #: stdio-common/../sysdeps/gnu/errlist.c:17 |
| msgid "Operation not permitted" |
| msgstr "此項操作並不被允許" |
| |
| #. TRANS No such file or directory. This is a ``file doesn't exist'' error |
| #. TRANS for ordinary files that are referenced in contexts where they are |
| #. TRANS expected to already exist. |
| #: stdio-common/../sysdeps/gnu/errlist.c:28 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:32 |
| msgid "No such file or directory" |
| msgstr "沒有此一檔案或目錄" |
| |
| #. TRANS No process matches the specified process ID. |
| #: stdio-common/../sysdeps/gnu/errlist.c:37 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:33 |
| msgid "No such process" |
| msgstr "沒有此一程序" |
| |
| #. TRANS Interrupted function call; an asynchronous signal occurred and prevented |
| #. TRANS completion of the call. When this happens, you should try the call |
| #. TRANS again. |
| #. TRANS |
| #. TRANS You can choose to have functions resume after a signal that is handled, |
| #. TRANS rather than failing with @code{EINTR}; see @ref{Interrupted |
| #. TRANS Primitives}. |
| #: stdio-common/../sysdeps/gnu/errlist.c:52 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:34 |
| msgid "Interrupted system call" |
| msgstr "中斷的系統呼叫" |
| |
| #. TRANS Input/output error; usually used for physical read or write errors. |
| #: stdio-common/../sysdeps/gnu/errlist.c:61 |
| msgid "Input/output error" |
| msgstr "輸入/輸出錯誤" |
| |
| #. TRANS No such device or address. The system tried to use the device |
| #. TRANS represented by a file you specified, and it couldn't find the device. |
| #. TRANS This can mean that the device file was installed incorrectly, or that |
| #. TRANS the physical device is missing or not correctly attached to the |
| #. TRANS computer. |
| #: stdio-common/../sysdeps/gnu/errlist.c:74 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:36 |
| msgid "No such device or address" |
| msgstr "沒有此一裝置或位址" |
| |
| #. TRANS Argument list too long; used when the arguments passed to a new program |
| #. TRANS being executed with one of the @code{exec} functions (@pxref{Executing a |
| #. TRANS File}) occupy too much memory space. This condition never arises in the |
| #. TRANS GNU system. |
| #: stdio-common/../sysdeps/gnu/errlist.c:86 |
| msgid "Argument list too long" |
| msgstr "引數列項目過長" |
| |
| #. TRANS Invalid executable file format. This condition is detected by the |
| #. TRANS @code{exec} functions; see @ref{Executing a File}. |
| #: stdio-common/../sysdeps/gnu/errlist.c:96 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:38 |
| msgid "Exec format error" |
| msgstr "可執行檔格式錯誤" |
| |
| #. TRANS Bad file descriptor; for example, I/O on a descriptor that has been |
| #. TRANS closed or reading from a descriptor open only for writing (or vice |
| #. TRANS versa). |
| #: stdio-common/../sysdeps/gnu/errlist.c:107 |
| msgid "Bad file descriptor" |
| msgstr "錯誤的檔案敘述項" |
| |
| #. TRANS There are no child processes. This error happens on operations that are |
| #. TRANS supposed to manipulate child processes, when there aren't any processes |
| #. TRANS to manipulate. |
| #: stdio-common/../sysdeps/gnu/errlist.c:118 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:40 |
| msgid "No child processes" |
| msgstr "沒有子程序存在" |
| |
| #. TRANS Deadlock avoided; allocating a system resource would have resulted in a |
| #. TRANS deadlock situation. The system does not guarantee that it will notice |
| #. TRANS all such situations. This error means you got lucky and the system |
| #. TRANS noticed; it might just hang. @xref{File Locks}, for an example. |
| #: stdio-common/../sysdeps/gnu/errlist.c:130 |
| msgid "Resource deadlock avoided" |
| msgstr "避開資源鎖定" |
| |
| #. TRANS No memory available. The system cannot allocate more virtual memory |
| #. TRANS because its capacity is full. |
| #: stdio-common/../sysdeps/gnu/errlist.c:140 |
| msgid "Cannot allocate memory" |
| msgstr "無法配置記憶體" |
| |
| #. TRANS Permission denied; the file permissions do not allow the attempted operation. |
| #: stdio-common/../sysdeps/gnu/errlist.c:149 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:43 |
| #: nis/nis_error.c:39 nis/ypclnt.c:808 |
| msgid "Permission denied" |
| msgstr "拒絕不符權限的操作" |
| |
| #. TRANS Bad address; an invalid pointer was detected. |
| #. TRANS In the GNU system, this error never happens; you get a signal instead. |
| #: stdio-common/../sysdeps/gnu/errlist.c:159 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:44 |
| msgid "Bad address" |
| msgstr "錯誤的位址" |
| |
| #. TRANS A file that isn't a block special file was given in a situation that |
| #. TRANS requires one. For example, trying to mount an ordinary file as a file |
| #. TRANS system in Unix gives this error. |
| #: stdio-common/../sysdeps/gnu/errlist.c:170 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:45 |
| msgid "Block device required" |
| msgstr "必須是區塊裝置 (Block device)" |
| |
| #. TRANS Resource busy; a system resource that can't be shared is already in use. |
| #. TRANS For example, if you try to delete a file that is the root of a currently |
| #. TRANS mounted filesystem, you get this error. |
| #: stdio-common/../sysdeps/gnu/errlist.c:181 |
| msgid "Device or resource busy" |
| msgstr "裝置或系統資源忙碌中" |
| |
| #. TRANS File exists; an existing file was specified in a context where it only |
| #. TRANS makes sense to specify a new file. |
| #: stdio-common/../sysdeps/gnu/errlist.c:191 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:47 |
| msgid "File exists" |
| msgstr "檔案已存在" |
| |
| #. TRANS An attempt to make an improper link across file systems was detected. |
| #. TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but |
| #. TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}). |
| #: stdio-common/../sysdeps/gnu/errlist.c:202 |
| msgid "Invalid cross-device link" |
| msgstr "不適用的裝置間連結" |
| |
| #. TRANS The wrong type of device was given to a function that expects a |
| #. TRANS particular sort of device. |
| #: stdio-common/../sysdeps/gnu/errlist.c:212 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:49 |
| msgid "No such device" |
| msgstr "沒有此一裝置" |
| |
| #. TRANS A file that isn't a directory was specified when a directory is required. |
| #: stdio-common/../sysdeps/gnu/errlist.c:221 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:50 |
| msgid "Not a directory" |
| msgstr "並不是一個目錄" |
| |
| #. TRANS File is a directory; you cannot open a directory for writing, |
| #. TRANS or create or remove hard links to it. |
| #: stdio-common/../sysdeps/gnu/errlist.c:231 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:51 |
| msgid "Is a directory" |
| msgstr "是個目錄" |
| |
| #. TRANS Invalid argument. This is used to indicate various kinds of problems |
| #. TRANS with passing the wrong argument to a library function. |
| #: stdio-common/../sysdeps/gnu/errlist.c:241 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:52 |
| msgid "Invalid argument" |
| msgstr "不適用的引數" |
| |
| #. TRANS The current process has too many files open and can't open any more. |
| #. TRANS Duplicate descriptors do count toward this limit. |
| #. TRANS |
| #. TRANS In BSD and GNU, the number of open files is controlled by a resource |
| #. TRANS limit that can usually be increased. If you get this error, you might |
| #. TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited; |
| #. TRANS @pxref{Limits on Resources}. |
| #: stdio-common/../sysdeps/gnu/errlist.c:256 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:54 |
| msgid "Too many open files" |
| msgstr "開啟太多檔案" |
| |
| #. TRANS There are too many distinct file openings in the entire system. Note |
| #. TRANS that any number of linked channels count as just one file opening; see |
| #. TRANS @ref{Linked Channels}. This error never occurs in the GNU system. |
| #: stdio-common/../sysdeps/gnu/errlist.c:267 |
| msgid "Too many open files in system" |
| msgstr "系統中太多的開啟檔案" |
| |
| #. TRANS Inappropriate I/O control operation, such as trying to set terminal |
| #. TRANS modes on an ordinary file. |
| #: stdio-common/../sysdeps/gnu/errlist.c:277 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:55 |
| msgid "Inappropriate ioctl for device" |
| msgstr "不希望的裝置輸出入控制 (ioctl)" |
| |
| #. TRANS An attempt to execute a file that is currently open for writing, or |
| #. TRANS write to a file that is currently being executed. Often using a |
| #. TRANS debugger to run a program is considered having it open for writing and |
| #. TRANS will cause this error. (The name stands for ``text file busy''.) This |
| #. TRANS is not an error in the GNU system; the text is copied as necessary. |
| #: stdio-common/../sysdeps/gnu/errlist.c:290 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:56 |
| msgid "Text file busy" |
| msgstr "文字檔忙錄中" |
| |
| #. TRANS File too big; the size of a file would be larger than allowed by the system. |
| #: stdio-common/../sysdeps/gnu/errlist.c:299 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:57 |
| msgid "File too large" |
| msgstr "檔案太大" |
| |
| #. TRANS No space left on device; write operation on a file failed because the |
| #. TRANS disk is full. |
| #: stdio-common/../sysdeps/gnu/errlist.c:309 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:58 |
| msgid "No space left on device" |
| msgstr "裝置上已無多餘空間" |
| |
| #. TRANS Invalid seek operation (such as on a pipe). |
| #: stdio-common/../sysdeps/gnu/errlist.c:318 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:59 |
| msgid "Illegal seek" |
| msgstr "不合法的搜尋" |
| |
| #. TRANS An attempt was made to modify something on a read-only file system. |
| #: stdio-common/../sysdeps/gnu/errlist.c:327 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:60 |
| msgid "Read-only file system" |
| msgstr "唯讀的檔案系統" |
| |
| #. TRANS Too many links; the link count of a single file would become too large. |
| #. TRANS @code{rename} can cause this error if the file being renamed already has |
| #. TRANS as many links as it can take (@pxref{Renaming Files}). |
| #: stdio-common/../sysdeps/gnu/errlist.c:338 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:61 |
| msgid "Too many links" |
| msgstr "太多連結" |
| |
| #. TRANS Domain error; used by mathematical functions when an argument value does |
| #. TRANS not fall into the domain over which the function is defined. |
| #: stdio-common/../sysdeps/gnu/errlist.c:361 |
| msgid "Numerical argument out of domain" |
| msgstr "數值參數的值超出範圍" |
| |
| #. TRANS Range error; used by mathematical functions when the result value is |
| #. TRANS not representable because of overflow or underflow. |
| #: stdio-common/../sysdeps/gnu/errlist.c:371 |
| msgid "Numerical result out of range" |
| msgstr "數值運算結果超出範圍" |
| |
| #. TRANS Resource temporarily unavailable; the call might work if you try again |
| #. TRANS later. The macro @code{EWOULDBLOCK} is another name for @code{EAGAIN}; |
| #. TRANS they are always the same in the GNU C library. |
| #. TRANS |
| #. TRANS This error can happen in a few different situations: |
| #. TRANS |
| #. TRANS @itemize @bullet |
| #. TRANS @item |
| #. TRANS An operation that would block was attempted on an object that has |
| #. TRANS non-blocking mode selected. Trying the same operation again will block |
| #. TRANS until some external condition makes it possible to read, write, or |
| #. TRANS connect (whatever the operation). You can use @code{select} to find out |
| #. TRANS when the operation will be possible; @pxref{Waiting for I/O}. |
| #. TRANS |
| #. TRANS @strong{Portability Note:} In many older Unix systems, this condition |
| #. TRANS was indicated by @code{EWOULDBLOCK}, which was a distinct error code |
| #. TRANS different from @code{EAGAIN}. To make your program portable, you should |
| #. TRANS check for both codes and treat them the same. |
| #. TRANS |
| #. TRANS @item |
| #. TRANS A temporary resource shortage made an operation impossible. @code{fork} |
| #. TRANS can return this error. It indicates that the shortage is expected to |
| #. TRANS pass, so your program can try the call again later and it may succeed. |
| #. TRANS It is probably a good idea to delay for a few seconds before trying it |
| #. TRANS again, to allow time for other processes to release scarce resources. |
| #. TRANS Such shortages are usually fairly serious and affect the whole system, |
| #. TRANS so usually an interactive program should report the error to the user |
| #. TRANS and return to its command loop. |
| #. TRANS @end itemize |
| #: stdio-common/../sysdeps/gnu/errlist.c:408 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:41 |
| msgid "Resource temporarily unavailable" |
| msgstr "資源暫時無法取得" |
| |
| #. TRANS In the GNU C library, this is another name for @code{EAGAIN} (above). |
| #. TRANS The values are always the same, on every operating system. |
| #. TRANS |
| #. TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a |
| #. TRANS separate error code. |
| #: stdio-common/../sysdeps/gnu/errlist.c:421 |
| msgid "Operation would block" |
| msgstr "操作將會暫停" |
| |
| #. TRANS An operation that cannot complete immediately was initiated on an object |
| #. TRANS that has non-blocking mode selected. Some functions that must always |
| #. TRANS block (such as @code{connect}; @pxref{Connecting}) never return |
| #. TRANS @code{EAGAIN}. Instead, they return @code{EINPROGRESS} to indicate that |
| #. TRANS the operation has begun and will take some time. Attempts to manipulate |
| #. TRANS the object before the call completes return @code{EALREADY}. You can |
| #. TRANS use the @code{select} function to find out when the pending operation |
| #. TRANS has completed; @pxref{Waiting for I/O}. |
| #: stdio-common/../sysdeps/gnu/errlist.c:437 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:180 |
| msgid "Operation now in progress" |
| msgstr "操作正在處理中" |
| |
| #. TRANS An operation is already in progress on an object that has non-blocking |
| #. TRANS mode selected. |
| #: stdio-common/../sysdeps/gnu/errlist.c:447 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:179 |
| msgid "Operation already in progress" |
| msgstr "此項操作已經在處理當中" |
| |
| #. TRANS A file that isn't a socket was specified when a socket is required. |
| #: stdio-common/../sysdeps/gnu/errlist.c:456 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:125 |
| msgid "Socket operation on non-socket" |
| msgstr "Socket 在非 socket 上運作" |
| |
| #. TRANS The size of a message sent on a socket was larger than the supported |
| #. TRANS maximum size. |
| #: stdio-common/../sysdeps/gnu/errlist.c:466 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:127 |
| msgid "Message too long" |
| msgstr "訊息太長" |
| |
| #. TRANS The socket type does not support the requested communications protocol. |
| #: stdio-common/../sysdeps/gnu/errlist.c:475 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:128 |
| msgid "Protocol wrong type for socket" |
| msgstr "socket 的協定錯誤型態" |
| |
| #. TRANS You specified a socket option that doesn't make sense for the |
| #. TRANS particular protocol being used by the socket. @xref{Socket Options}. |
| #: stdio-common/../sysdeps/gnu/errlist.c:485 |
| msgid "Protocol not available" |
| msgstr "協定不存在" |
| |
| #. TRANS The socket domain does not support the requested communications protocol |
| #. TRANS (perhaps because the requested protocol is completely invalid). |
| #. TRANS @xref{Creating a Socket}. |
| #: stdio-common/../sysdeps/gnu/errlist.c:496 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:150 |
| msgid "Protocol not supported" |
| msgstr "協定不支援" |
| |
| #. TRANS The socket type is not supported. |
| #: stdio-common/../sysdeps/gnu/errlist.c:505 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:151 |
| msgid "Socket type not supported" |
| msgstr "Socket 型別不支援" |
| |
| #. TRANS The operation you requested is not supported. Some socket functions |
| #. TRANS don't make sense for all types of sockets, and others may not be |
| #. TRANS implemented for all communications protocols. In the GNU system, this |
| #. TRANS error can happen for many calls when the object does not support the |
| #. TRANS particular operation; it is a generic indication that the server knows |
| #. TRANS nothing to do for that call. |
| #: stdio-common/../sysdeps/gnu/errlist.c:519 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:78 |
| msgid "Operation not supported" |
| msgstr "此項操作並不被支援" |
| |
| #. TRANS The socket communications protocol family you requested is not supported. |
| #: stdio-common/../sysdeps/gnu/errlist.c:528 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:153 |
| msgid "Protocol family not supported" |
| msgstr "協定群組不支援" |
| |
| #. TRANS The address family specified for a socket is not supported; it is |
| #. TRANS inconsistent with the protocol being used on the socket. @xref{Sockets}. |
| #: stdio-common/../sysdeps/gnu/errlist.c:538 |
| msgid "Address family not supported by protocol" |
| msgstr "位址族群不被協定所支援" |
| |
| #. TRANS The requested socket address is already in use. @xref{Socket Addresses}. |
| #: stdio-common/../sysdeps/gnu/errlist.c:547 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:155 |
| msgid "Address already in use" |
| msgstr "位址已經有在使用" |
| |
| #. TRANS The requested socket address is not available; for example, you tried |
| #. TRANS to give a socket a name that doesn't match the local host name. |
| #. TRANS @xref{Socket Addresses}. |
| #: stdio-common/../sysdeps/gnu/errlist.c:558 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:156 |
| msgid "Cannot assign requested address" |
| msgstr "無法指定所需的位址" |
| |
| #. TRANS A socket operation failed because the network was down. |
| #: stdio-common/../sysdeps/gnu/errlist.c:567 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:157 |
| msgid "Network is down" |
| msgstr "網路停擺" |
| |
| #. TRANS A socket operation failed because the subnet containing the remote host |
| #. TRANS was unreachable. |
| #: stdio-common/../sysdeps/gnu/errlist.c:577 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:158 |
| msgid "Network is unreachable" |
| msgstr "無法接觸網路" |
| |
| #. TRANS A network connection was reset because the remote host crashed. |
| #: stdio-common/../sysdeps/gnu/errlist.c:586 |
| msgid "Network dropped connection on reset" |
| msgstr "在重設時網路連線漏失" |
| |
| #. TRANS A network connection was aborted locally. |
| #: stdio-common/../sysdeps/gnu/errlist.c:595 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:160 |
| msgid "Software caused connection abort" |
| msgstr "軟體造成連線中斷" |
| |
| #. TRANS A network connection was closed for reasons outside the control of the |
| #. TRANS local host, such as by the remote machine rebooting or an unrecoverable |
| #. TRANS protocol violation. |
| #: stdio-common/../sysdeps/gnu/errlist.c:606 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:161 |
| msgid "Connection reset by peer" |
| msgstr "連線被對方重設" |
| |
| #. TRANS The kernel's buffers for I/O operations are all in use. In GNU, this |
| #. TRANS error is always synonymous with @code{ENOMEM}; you may get one or the |
| #. TRANS other from network operations. |
| #: stdio-common/../sysdeps/gnu/errlist.c:617 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:162 |
| msgid "No buffer space available" |
| msgstr "沒有可用的緩衝空間了" |
| |
| #. TRANS You tried to connect a socket that is already connected. |
| #. TRANS @xref{Connecting}. |
| #: stdio-common/../sysdeps/gnu/errlist.c:627 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:163 |
| msgid "Transport endpoint is already connected" |
| msgstr "傳輸的兩端已經完成連線了" |
| |
| #. TRANS The socket is not connected to anything. You get this error when you |
| #. TRANS try to transmit data over a socket, without first specifying a |
| #. TRANS destination for the data. For a connectionless socket (for datagram |
| #. TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead. |
| #: stdio-common/../sysdeps/gnu/errlist.c:639 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:164 |
| msgid "Transport endpoint is not connected" |
| msgstr "傳輸的兩端尚未連線" |
| |
| #. TRANS No default destination address was set for the socket. You get this |
| #. TRANS error when you try to transmit data over a connectionless socket, |
| #. TRANS without first specifying a destination for the data with @code{connect}. |
| #: stdio-common/../sysdeps/gnu/errlist.c:650 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:126 |
| msgid "Destination address required" |
| msgstr "需要目標位址" |
| |
| #. TRANS The socket has already been shut down. |
| #: stdio-common/../sysdeps/gnu/errlist.c:659 |
| msgid "Cannot send after transport endpoint shutdown" |
| msgstr "無法在輸送端點關閉後傳送" |
| |
| #. TRANS ??? |
| #: stdio-common/../sysdeps/gnu/errlist.c:668 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:174 |
| msgid "Too many references: cannot splice" |
| msgstr "太多的參考指標: 無法連接" |
| |
| #. TRANS A socket operation with a specified timeout received no response during |
| #. TRANS the timeout period. |
| #: stdio-common/../sysdeps/gnu/errlist.c:678 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:175 |
| msgid "Connection timed out" |
| msgstr "連線超過時間" |
| |
| #. TRANS A remote host refused to allow the network connection (typically because |
| #. TRANS it is not running the requested service). |
| #: stdio-common/../sysdeps/gnu/errlist.c:688 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:176 |
| msgid "Connection refused" |
| msgstr "連線被拒絕" |
| |
| #. TRANS Too many levels of symbolic links were encountered in looking up a file name. |
| #. TRANS This often indicates a cycle of symbolic links. |
| #: stdio-common/../sysdeps/gnu/errlist.c:698 |
| msgid "Too many levels of symbolic links" |
| msgstr "太多層級的符號連結檔" |
| |
| #. TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for |
| #. TRANS Files}) or host name too long (in @code{gethostname} or |
| #. TRANS @code{sethostname}; @pxref{Host Identification}). |
| #: stdio-common/../sysdeps/gnu/errlist.c:709 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:108 |
| msgid "File name too long" |
| msgstr "檔名太長" |
| |
| #. TRANS The remote host for a requested network connection is down. |
| #: stdio-common/../sysdeps/gnu/errlist.c:718 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:177 |
| msgid "Host is down" |
| msgstr "遠端系統已停機了" |
| |
| #. TRANS The remote host for a requested network connection is not reachable. |
| #: stdio-common/../sysdeps/gnu/errlist.c:727 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:178 |
| msgid "No route to host" |
| msgstr "找不到通往該主機的路由路徑" |
| |
| #. TRANS Directory not empty, where an empty directory was expected. Typically, |
| #. TRANS this error occurs when you are trying to delete a directory. |
| #: stdio-common/../sysdeps/gnu/errlist.c:737 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:123 |
| msgid "Directory not empty" |
| msgstr "目錄不是空的" |
| |
| #. TRANS This means that the per-user limit on new process would be exceeded by |
| #. TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on |
| #. TRANS the @code{RLIMIT_NPROC} limit. |
| #: stdio-common/../sysdeps/gnu/errlist.c:748 |
| msgid "Too many processes" |
| msgstr "太多的行程" |
| |
| #. TRANS The file quota system is confused because there are too many users. |
| #. TRANS @c This can probably happen in a GNU system when using NFS. |
| #: stdio-common/../sysdeps/gnu/errlist.c:758 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:124 |
| msgid "Too many users" |
| msgstr "太多使用者" |
| |
| #. TRANS The user's disk quota was exceeded. |
| #: stdio-common/../sysdeps/gnu/errlist.c:767 |
| msgid "Disk quota exceeded" |
| msgstr "硬碟 quota 滿了" |
| |
| #. TRANS Stale NFS file handle. This indicates an internal confusion in the NFS |
| #. TRANS system which is due to file system rearrangements on the server host. |
| #. TRANS Repairing this condition usually requires unmounting and remounting |
| #. TRANS the NFS file system on the local host. |
| #: stdio-common/../sysdeps/gnu/errlist.c:779 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:181 |
| msgid "Stale NFS file handle" |
| msgstr "過舊的 NFS 檔案控制碼" |
| |
| #. TRANS An attempt was made to NFS-mount a remote file system with a file name that |
| #. TRANS already specifies an NFS-mounted file. |
| #. TRANS (This is an error on some operating systems, but we expect it to work |
| #. TRANS properly on the GNU system, making this error code impossible.) |
| #: stdio-common/../sysdeps/gnu/errlist.c:791 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:96 |
| msgid "Object is remote" |
| msgstr "目標檔案位於遠端" |
| |
| #. TRANS ??? |
| #: stdio-common/../sysdeps/gnu/errlist.c:800 |
| msgid "RPC struct is bad" |
| msgstr "RPC 結構是壞的" |
| |
| #. TRANS ??? |
| #: stdio-common/../sysdeps/gnu/errlist.c:809 |
| msgid "RPC version wrong" |
| msgstr "RPC 版本錯誤" |
| |
| #. TRANS ??? |
| #: stdio-common/../sysdeps/gnu/errlist.c:818 |
| msgid "RPC program not available" |
| msgstr "RPC 程式不存在" |
| |
| #. TRANS ??? |
| #: stdio-common/../sysdeps/gnu/errlist.c:827 |
| msgid "RPC program version wrong" |
| msgstr "RPC 程式版本錯誤" |
| |
| #. TRANS ??? |
| #: stdio-common/../sysdeps/gnu/errlist.c:836 |
| msgid "RPC bad procedure for program" |
| msgstr "程式的 RPC 程序錯誤" |
| |
| #. TRANS No locks available. This is used by the file locking facilities; see |
| #. TRANS @ref{File Locks}. This error is never generated by the GNU system, but |
| #. TRANS it can result from an operation to an NFS server running another |
| #. TRANS operating system. |
| #: stdio-common/../sysdeps/gnu/errlist.c:848 |
| msgid "No locks available" |
| msgstr "無法鎖定資料" |
| |
| #. TRANS Inappropriate file type or format. The file was the wrong type for the |
| #. TRANS operation, or a data file had the wrong format. |
| #. TRANS |
| #. TRANS On some systems @code{chmod} returns this error if you try to set the |
| #. TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. |
| #: stdio-common/../sysdeps/gnu/errlist.c:861 |
| msgid "Inappropriate file type or format" |
| msgstr "不希望的檔案形態或格式" |
| |
| #. TRANS ??? |
| #: stdio-common/../sysdeps/gnu/errlist.c:870 |
| msgid "Authentication error" |
| msgstr "鑑定錯誤" |
| |
| #. TRANS ??? |
| #: stdio-common/../sysdeps/gnu/errlist.c:879 |
| msgid "Need authenticator" |
| msgstr "需要認證" |
| |
| #. TRANS Function not implemented. This indicates that the function called is |
| #. TRANS not implemented at all, either in the C library itself or in the |
| #. TRANS operating system. When you get this error, you can be sure that this |
| #. TRANS particular function will always fail with @code{ENOSYS} unless you |
| #. TRANS install a new version of the C library or the operating system. |
| #: stdio-common/../sysdeps/gnu/errlist.c:892 |
| msgid "Function not implemented" |
| msgstr "功能沒有實作" |
| |
| #. TRANS Not supported. A function returns this error when certain parameter |
| #. TRANS values are valid, but the functionality they request is not available. |
| #. TRANS This can mean that the function does not implement a particular command |
| #. TRANS or option value or flag bit at all. For functions that operate on some |
| #. TRANS object given in a parameter, such as a file descriptor or a port, it |
| #. TRANS might instead mean that only @emph{that specific object} (file |
| #. TRANS descriptor, port, etc.) is unable to support the other parameters given; |
| #. TRANS different file descriptors might support different ranges of parameter |
| #. TRANS values. |
| #. TRANS |
| #. TRANS If the entire function is not available at all in the implementation, |
| #. TRANS it returns @code{ENOSYS} instead. |
| #: stdio-common/../sysdeps/gnu/errlist.c:912 |
| msgid "Not supported" |
| msgstr "並未支援" |
| |
| #. TRANS While decoding a multibyte character the function came along an invalid |
| #. TRANS or an incomplete sequence of bytes or the given wide character is invalid. |
| #: stdio-common/../sysdeps/gnu/errlist.c:922 |
| msgid "Invalid or incomplete multibyte or wide character" |
| msgstr "不適用或不完整的多位元組字元或寬字元" |
| |
| #. TRANS In the GNU system, servers supporting the @code{term} protocol return |
| #. TRANS this error for certain operations when the caller is not in the |
| #. TRANS foreground process group of the terminal. Users do not usually see this |
| #. TRANS error because functions such as @code{read} and @code{write} translate |
| #. TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control}, |
| #. TRANS for information on process groups and these signals. |
| #: stdio-common/../sysdeps/gnu/errlist.c:936 |
| msgid "Inappropriate operation for background process" |
| msgstr "不希望的背景行程運作" |
| |
| #. TRANS In the GNU system, opening a file returns this error when the file is |
| #. TRANS translated by a program and the translator program dies while starting |
| #. TRANS up, before it has connected to the file. |
| #: stdio-common/../sysdeps/gnu/errlist.c:947 |
| msgid "Translator died" |
| msgstr "中介程式已經結束" |
| |
| #. TRANS The experienced user will know what is wrong. |
| #. TRANS @c This error code is a joke. Its perror text is part of the joke. |
| #. TRANS @c Don't change it. |
| #: stdio-common/../sysdeps/gnu/errlist.c:958 |
| msgid "?" |
| msgstr "?" |
| |
| #. TRANS You did @strong{what}? |
| #: stdio-common/../sysdeps/gnu/errlist.c:967 |
| msgid "You really blew it this time" |
| msgstr "這次真的被您打敗了" |
| |
| # This is error EIEIO, errno 104 |
| # |
| # - Macro: int EIEIO |
| # Go home and have a glass of warm, dairy-fresh milk. |
| # |
| # The following messages were copied & pasted |
| # from es.po by Santiago Vila Doncel <sanvila@unex.es>. |
| # |
| # <es.po> |
| # 穌u diablos es esto?, esperemos a tener las fuentes |
| # estupendo, este error parece mostrarse en dos ocasiones |
| # - Macro: int EIEIO |
| # Go home and have a glass of warm, dairy-fresh milk. |
| # Jochen tambien lo traduce as. em |
| # |
| # Okay. Since you are dying to know, I'll tell you. |
| # This is a joke, obviously. There is a children's song which begins, |
| # "Old McDonald had a farm, e-i-e-i-o." Every time I see the (real) |
| # errno macro EIO, I think about that song. Probably most of my |
| # compatriots who program on Unix do, too. One of them must have stayed |
| # up a little too late one night and decided to add it to Hurd or Glibc. |
| # Whoever did it should be castigated, but it made me laugh. |
| # --jtobey@channel1.com |
| # |
| # "bought the farm" means "died". -jtobey |
| # |
| # Bueno, pues despu廥 de pensarlo mucho, he seguido el ejemplo de la |
| # traducci鏮 francesa (traducci鏮 libre). sv |
| # </es.po> |
| # |
| # 簡單的說,兒歌 "唐老先生有塊地...",然後呢?? ;-p |
| # |
| #. TRANS Go home and have a glass of warm, dairy-fresh milk. |
| #: stdio-common/../sysdeps/gnu/errlist.c:976 |
| msgid "Computer bought the farm" |
| msgstr "這台電腦買了一塊地囉" |
| |
| #. TRANS This error code has no purpose. |
| #: stdio-common/../sysdeps/gnu/errlist.c:985 |
| msgid "Gratuitous error" |
| msgstr "無故的錯誤" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:993 |
| msgid "Bad message" |
| msgstr "錯誤的訊息" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1001 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:66 |
| msgid "Identifier removed" |
| msgstr "識別符號移除" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1009 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:104 |
| msgid "Multihop attempted" |
| msgstr "嘗試 Multihop" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1017 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:91 |
| msgid "No data available" |
| msgstr "沒有可用的資料" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1025 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:97 |
| msgid "Link has been severed" |
| msgstr "連結已有服務" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1033 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:65 |
| msgid "No message of desired type" |
| msgstr "沒有符合需求格式的訊息" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1041 |
| msgid "Out of streams resources" |
| msgstr "所有資料流的資源都已用盡" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1049 |
| msgid "Device not a stream" |
| msgstr "裝置不是資料流" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1057 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:109 |
| msgid "Value too large for defined data type" |
| msgstr "有定義的資料型別值太大" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1065 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:101 |
| msgid "Protocol error" |
| msgstr "協定錯誤" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1073 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:92 |
| msgid "Timer expired" |
| msgstr "計時器已過時取消了" |
| |
| #. TRANS Operation canceled; an asynchronous operation was canceled before it |
| #. TRANS completed. @xref{Asynchronous I/O}. When you call @code{aio_cancel}, |
| #. TRANS the normal result is for the operations affected to complete with this |
| #. TRANS error; @pxref{Cancel AIO Operations}. |
| #: stdio-common/../sysdeps/gnu/errlist.c:1085 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:77 |
| msgid "Operation canceled" |
| msgstr "操作已被取消" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1093 |
| msgid "Interrupted system call should be restarted" |
| msgstr "中斷的系統呼叫必須重新啟動" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1101 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:67 |
| msgid "Channel number out of range" |
| msgstr "通道號碼超出範圍" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1109 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:68 |
| msgid "Level 2 not synchronized" |
| msgstr "層級 2 沒有同步" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1117 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:69 |
| msgid "Level 3 halted" |
| msgstr "層級 3 停止" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1125 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:70 |
| msgid "Level 3 reset" |
| msgstr "層級 3 重設" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1133 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:71 |
| msgid "Link number out of range" |
| msgstr "連結數目超過範圍" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1141 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:72 |
| msgid "Protocol driver not attached" |
| msgstr "協定的驅動程式未連接" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1149 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:73 |
| msgid "No CSI structure available" |
| msgstr "沒有可用的 CSI 結構了" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1157 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:74 |
| msgid "Level 2 halted" |
| msgstr "層級 2 停止" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1165 |
| msgid "Invalid exchange" |
| msgstr "不適用的交換" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1173 |
| msgid "Invalid request descriptor" |
| msgstr "不適用的請求敘述項" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1181 |
| msgid "Exchange full" |
| msgstr "交換已充足" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1189 |
| msgid "No anode" |
| msgstr "沒有陽極" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1197 |
| msgid "Invalid request code" |
| msgstr "不適用的請求碼" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1205 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:85 |
| msgid "Invalid slot" |
| msgstr "不適用的 slot" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1213 |
| msgid "File locking deadlock error" |
| msgstr "檔案鎖定停頓錯誤" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1221 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:87 |
| msgid "Bad font file format" |
| msgstr "錯誤的字型檔格式" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1229 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:94 |
| msgid "Machine is not on the network" |
| msgstr "機器不在網路中" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1237 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:95 |
| msgid "Package not installed" |
| msgstr "套件並未安裝" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1245 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:98 |
| msgid "Advertise error" |
| msgstr "通知錯誤" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1253 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:99 |
| msgid "Srmount error" |
| msgstr "Srmount 錯誤" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1261 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:100 |
| msgid "Communication error on send" |
| msgstr "在傳送時通訊錯誤" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1269 |
| msgid "RFS specific error" |
| msgstr "RFS 特定錯誤" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1277 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:110 |
| msgid "Name not unique on network" |
| msgstr "網路上的名稱不是唯一的" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1285 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:111 |
| msgid "File descriptor in bad state" |
| msgstr "檔案敘述項處於錯誤狀態" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1293 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:112 |
| msgid "Remote address changed" |
| msgstr "遠端位址改變了" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1301 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:113 |
| msgid "Can not access a needed shared library" |
| msgstr "無法存取所需的分享函式庫" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1309 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:114 |
| msgid "Accessing a corrupted shared library" |
| msgstr "存取一個毀掉的分享函式庫" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1317 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:115 |
| msgid ".lib section in a.out corrupted" |
| msgstr "a.out 中 .lib 節區毀掉了" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1325 |
| msgid "Attempting to link in too many shared libraries" |
| msgstr "嘗試去連結太多的分享資料庫" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1333 |
| msgid "Cannot exec a shared library directly" |
| msgstr "不能直接執行一個分享函式庫" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1341 |
| msgid "Streams pipe error" |
| msgstr "資料流管線錯誤" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1349 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:165 |
| msgid "Structure needs cleaning" |
| msgstr "結構需要清理" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1357 |
| msgid "Not a XENIX named type file" |
| msgstr "並非 XENIX 命名格式的檔案" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1365 |
| msgid "No XENIX semaphores available" |
| msgstr "沒有可用的 XENIX 信號標誌了" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1373 |
| msgid "Is a named type file" |
| msgstr "是個有名字形態的檔案" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1381 |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:170 |
| msgid "Remote I/O error" |
| msgstr "遠端輸出入錯誤" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1389 |
| msgid "No medium found" |
| msgstr "找不到媒體" |
| |
| #: stdio-common/../sysdeps/gnu/errlist.c:1397 |
| msgid "Wrong medium type" |
| msgstr "錯誤的媒介形態" |
| |
| #: stdio-common/../sysdeps/unix/siglist.c:26 |
| msgid "Signal 0" |
| msgstr "訊號 0" |
| |
| #: stdio-common/../sysdeps/unix/siglist.c:32 |
| msgid "IOT trap" |
| msgstr "IOT 陷阱" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:30 |
| msgid "Error 0" |
| msgstr "第 0 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:31 |
| #: nis/nis_error.c:40 |
| msgid "Not owner" |
| msgstr "並非擁有者" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:35 |
| msgid "I/O error" |
| msgstr "I/O 錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:37 |
| msgid "Arg list too long" |
| msgstr "Arg 串列太長" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:39 |
| msgid "Bad file number" |
| msgstr "錯誤的檔案號碼" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:42 |
| msgid "Not enough space" |
| msgstr "空間不足" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:46 |
| msgid "Device busy" |
| msgstr "裝置忙碌中" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:48 |
| msgid "Cross-device link" |
| msgstr "裝置之間的連接" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:53 |
| msgid "File table overflow" |
| msgstr "檔案表已滿" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:63 |
| msgid "Argument out of domain" |
| msgstr "引數超過範圍" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:64 |
| msgid "Result too large" |
| msgstr "結果太大了" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:75 |
| msgid "Deadlock situation detected/avoided" |
| msgstr "偵測/避免停頓狀態" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:76 |
| msgid "No record locks available" |
| msgstr "沒有可用的紀錄鎖了" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:79 |
| msgid "Disc quota exceeded" |
| msgstr "Disc quota 滿了" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:80 |
| msgid "Bad exchange descriptor" |
| msgstr "錯誤的交換敘述項" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:81 |
| msgid "Bad request descriptor" |
| msgstr "錯誤的請求敘述項" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:82 |
| msgid "Message tables full" |
| msgstr "訊息表格已滿" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:83 |
| msgid "Anode table overflow" |
| msgstr "Anode 表格溢出" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:84 |
| msgid "Bad request code" |
| msgstr "錯誤的請求訊號編碼" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:86 |
| msgid "File locking deadlock" |
| msgstr "檔案鎖定停頓" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:88 |
| msgid "Error 58" |
| msgstr "第 58 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:89 |
| msgid "Error 59" |
| msgstr "第 59 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:90 |
| msgid "Not a stream device" |
| msgstr "並非資料流裝置" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:93 |
| msgid "Out of stream resources" |
| msgstr "資料流資源用盡" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:102 |
| msgid "Error 72" |
| msgstr "第 72 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:103 |
| msgid "Error 73" |
| msgstr "第 73 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:105 |
| msgid "Error 75" |
| msgstr "第 75 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:106 |
| msgid "Error 76" |
| msgstr "第 76 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:107 |
| msgid "Not a data message" |
| msgstr "並不是一個資料訊息" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:116 |
| msgid "Attempting to link in more shared libraries than system limit" |
| msgstr "嘗試去連結超過系統上限的分享資料庫" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:117 |
| msgid "Can not exec a shared library directly" |
| msgstr "無法直接執行分享函式庫" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:118 |
| msgid "Illegal byte sequence" |
| msgstr "不合法的位元組序列" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:119 |
| msgid "Operation not applicable" |
| msgstr "此項操作並不適當" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:120 |
| msgid "Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS" |
| msgstr "尋找路徑名稱時遭遇的符號連結數目超過 MAXSYMLINKS 裡面定義的最大值" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:121 |
| msgid "Error 91" |
| msgstr "第 91 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:122 |
| msgid "Error 92" |
| msgstr "第 92 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:129 |
| msgid "Option not supported by protocol" |
| msgstr "通訊協定並不支援此參數" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:130 |
| msgid "Error 100" |
| msgstr "第 100 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:131 |
| msgid "Error 101" |
| msgstr "第 101 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:132 |
| msgid "Error 102" |
| msgstr "第 102 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:133 |
| msgid "Error 103" |
| msgstr "第 103 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:134 |
| msgid "Error 104" |
| msgstr "第 104 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:135 |
| msgid "Error 105" |
| msgstr "第 105 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:136 |
| msgid "Error 106" |
| msgstr "第 106 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:137 |
| msgid "Error 107" |
| msgstr "第 107 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:138 |
| msgid "Error 108" |
| msgstr "第 108 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:139 |
| msgid "Error 109" |
| msgstr "第 109 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:140 |
| msgid "Error 110" |
| msgstr "第 110 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:141 |
| msgid "Error 111" |
| msgstr "第 111 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:142 |
| msgid "Error 112" |
| msgstr "第 112 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:143 |
| msgid "Error 113" |
| msgstr "第 113 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:144 |
| msgid "Error 114" |
| msgstr "第 114 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:145 |
| msgid "Error 115" |
| msgstr "第 115 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:146 |
| msgid "Error 116" |
| msgstr "第 116 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:147 |
| msgid "Error 117" |
| msgstr "第 117 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:148 |
| msgid "Error 118" |
| msgstr "第 118 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:149 |
| msgid "Error 119" |
| msgstr "第 119 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:152 |
| msgid "Operation not supported on transport endpoint" |
| msgstr "此項操作在傳輸終點時並不被支援" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:154 |
| msgid "Address family not supported by protocol family" |
| msgstr "位址族群不被協定族群所支援" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:159 |
| msgid "Network dropped connection because of reset" |
| msgstr "網路連線漏失,因為重設" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:166 |
| msgid "Error 136" |
| msgstr "第 136 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:167 |
| msgid "Not a name file" |
| msgstr "並不是一個命名檔案" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:168 |
| msgid "Not available" |
| msgstr "不存在" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:169 |
| msgid "Is a name file" |
| msgstr "是個有名字的檔案" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:171 |
| msgid "Reserved for future use" |
| msgstr "保留給將來使用" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:172 |
| msgid "Error 142" |
| msgstr "第 142 號錯誤" |
| |
| #: stdio-common/../sysdeps/unix/sysv/sysv4/solaris2/sparc/errlist.c:173 |
| msgid "Cannot send after socket shutdown" |
| msgstr "無法在 socket 關閉後傳送" |
| |
| #: stdio-common/psignal.c:63 |
| #, c-format |
| msgid "%s%sUnknown signal %d\n" |
| msgstr "%s%s未知的訊號 %d\n" |
| |
| #: dlfcn/dlinfo.c:51 |
| msgid "RTLD_SELF used in code not dynamically loaded" |
| msgstr "程式碼所使用的 RTLD_SELF 沒有動態載入" |
| |
| #: dlfcn/dlinfo.c:61 |
| msgid "unsupported dlinfo request" |
| msgstr "未支援的 dlinfo 請求" |
| |
| #: malloc/mcheck.c:346 |
| msgid "memory is consistent, library is buggy\n" |
| msgstr "記憶體內容一致,函式庫有問題\n" |
| |
| #: malloc/mcheck.c:349 |
| msgid "memory clobbered before allocated block\n" |
| msgstr "記憶體在配置區塊之前就 clobbered 了\n" |
| |
| #: malloc/mcheck.c:352 |
| msgid "memory clobbered past end of allocated block\n" |
| msgstr "記憶體在經過配置的區塊尾部時 clobbered 了\n" |
| |
| #: malloc/mcheck.c:355 |
| msgid "block freed twice\n" |
| msgstr "此區塊被用 free 指令釋放了兩次\n" |
| |
| #: malloc/mcheck.c:358 |
| msgid "bogus mcheck_status, library is buggy\n" |
| msgstr "記憶體檢查狀態 (mcheck_ststus) 有誤,您所用的函式庫有問題\n" |
| |
| #: malloc/memusagestat.c:53 |
| msgid "Name output file" |
| msgstr "名稱輸出檔" |
| |
| #: malloc/memusagestat.c:54 |
| msgid "Title string used in output graphic" |
| msgstr "在輸出的圖像中使用有標頭的字串" |
| |
| #: malloc/memusagestat.c:55 |
| msgid "Generate output linear to time (default is linear to number of function calls)" |
| msgstr "產生輸出與時間呈線性關係 (預設是與函式呼叫數目呈線性關係)" |
| |
| #: malloc/memusagestat.c:57 |
| msgid "Also draw graph for total memory consumption" |
| msgstr "同時對總記憶體時用量作圖" |
| |
| #: malloc/memusagestat.c:58 |
| msgid "make output graphic VALUE pixel wide" |
| msgstr "設定輸出的圖形寬度為 VALUE 個像素" |
| |
| #: malloc/memusagestat.c:59 |
| msgid "make output graphic VALUE pixel high" |
| msgstr "設定輸出的圖形高度為 VALUE 個像素" |
| |
| #: malloc/memusagestat.c:64 |
| msgid "Generate graphic from memory profiling data" |
| msgstr "從記憶體性能測試資料產生圖像" |
| |
| #: malloc/memusagestat.c:67 |
| msgid "DATAFILE [OUTFILE]" |
| msgstr "資料檔 [輸出檔]" |
| |
| #: string/strerror.c:43 posix/../sysdeps/posix/gai_strerror.c:57 |
| msgid "Unknown error" |
| msgstr "未知的錯誤" |
| |
| #: string/strsignal.c:69 |
| #, c-format |
| msgid "Real-time signal %d" |
| msgstr "即時的訊號 %d" |
| |
| #: string/strsignal.c:73 |
| #, c-format |
| msgid "Unknown signal %d" |
| msgstr "未知的訊號 %d" |
| |
| #: timezone/zdump.c:176 |
| #, c-format |
| msgid "%s: usage is %s [ --version ] [ -v ] [ -c cutoff ] zonename ...\n" |
| msgstr "%s: 用法是 %s [ --version ] [ -v ] [ -c 切斷 ] 地區名稱 ...\n" |
| |
| #: timezone/zdump.c:269 |
| msgid "Error writing to standard output" |
| msgstr "寫入標準輸出時錯誤" |
| |
| #: timezone/zic.c:361 |
| #, c-format |
| msgid "%s: Memory exhausted: %s\n" |
| msgstr "%s: 記憶體已用完: %s\n" |
| |
| #: timezone/zic.c:386 misc/error.c:129 misc/error.c:157 |
| msgid "Unknown system error" |
| msgstr "未知的系統錯誤" |
| |
| #: timezone/zic.c:420 |
| #, c-format |
| msgid "\"%s\", line %d: %s" |
| msgstr "\"%s\", 第 %d 行: %s" |
| |
| #: timezone/zic.c:423 |
| #, c-format |
| msgid " (rule from \"%s\", line %d)" |
| msgstr " (規則來自 \"%s\", 第 %d 行)" |
| |
| #: timezone/zic.c:435 |
| msgid "warning: " |
| msgstr "警告: " |
| |
| #: timezone/zic.c:445 |
| #, c-format |
| msgid "" |
| "%s: usage is %s [ --version ] [ -s ] [ -v ] [ -l localtime ] [ -p posixrules ] \\\n" |
| "\t[ -d directory ] [ -L leapseconds ] [ -y yearistype ] [ filename ... ]\n" |
| msgstr "" |
| "%s: 用法是 %s [ --version ] [ -s ] [ -v ] [ -l 當地時間 ] [ -p posix規則 ] \\\n" |
| "\t[ -d 目錄 ] [ -L 閏秒 ] [ -y 年份型態 ] [ 檔案名稱 ... ]\n" |
| |
| #: timezone/zic.c:492 |
| #, c-format |
| msgid "%s: More than one -d option specified\n" |
| msgstr "%s: 您使用了超過一個 -d 選項\n" |
| |
| #: timezone/zic.c:502 |
| #, c-format |
| msgid "%s: More than one -l option specified\n" |
| msgstr "%s: 您使用了超過一個 -l 選項\n" |
| |
| #: timezone/zic.c:512 |
| #, c-format |
| msgid "%s: More than one -p option specified\n" |
| msgstr "%s: 您使用了超過一個 -p 選項\n" |
| |
| #: timezone/zic.c:522 |
| #, c-format |
| msgid "%s: More than one -y option specified\n" |
| msgstr "%s: 您使用了超過一個 -y 選項\n" |
| |
| #: timezone/zic.c:532 |
| #, c-format |
| msgid "%s: More than one -L option specified\n" |
| msgstr "%s: 您使用了超過一個 -L 選項\n" |
| |
| #: timezone/zic.c:639 |
| #, c-format |
| msgid "%s: Can't unlink %s: %s\n" |
| msgstr "%s: 無法取消連結 %s: %s\n" |
| |
| #: timezone/zic.c:646 |
| msgid "hard link failed, symbolic link used" |
| msgstr "實體連結失敗,使用符號連結代替" |
| |
| #: timezone/zic.c:654 |
| #, c-format |
| msgid "%s: Can't link from %s to %s: %s\n" |
| msgstr "%s: 無法從 %s 連結到 %s: %s\n" |
| |
| #: timezone/zic.c:752 timezone/zic.c:754 |
| msgid "same rule name in multiple files" |
| msgstr "在多個檔案裡面有相同的規則名稱" |
| |
| #: timezone/zic.c:795 |
| msgid "unruly zone" |
| msgstr "沒有規則的時區" |
| |
| #: timezone/zic.c:802 |
| #, c-format |
| msgid "%s in ruleless zone" |
| msgstr "%s 在沒有規則的區段" |
| |
| #: timezone/zic.c:823 |
| msgid "standard input" |
| msgstr "標準輸入" |
| |
| #: timezone/zic.c:828 |
| #, c-format |
| msgid "%s: Can't open %s: %s\n" |
| msgstr "%s: 無法開啟 %s: %s\n" |
| |
| #: timezone/zic.c:839 |
| msgid "line too long" |
| msgstr "行的長度過長" |
| |
| #: timezone/zic.c:859 |
| msgid "input line of unknown type" |
| msgstr "不明型別的輸入行" |
| |
| #: timezone/zic.c:875 |
| #, c-format |
| msgid "%s: Leap line in non leap seconds file %s\n" |
| msgstr "%s: 閏時設定行 (leap line) 出現在不含閏秒的設定檔 %s 中\n" |
| |
| #: timezone/zic.c:882 timezone/zic.c:1297 timezone/zic.c:1322 |
| #, c-format |
| msgid "%s: panic: Invalid l_value %d\n" |
| msgstr "%s: 嚴重錯誤: 錯誤的左值 (l_value) %d\n" |
| |
| #: timezone/zic.c:890 |
| #, c-format |
| msgid "%s: Error reading %s\n" |
| msgstr "%s: 讀取錯誤 %s\n" |
| |
| #: timezone/zic.c:897 |
| #, c-format |
| msgid "%s: Error closing %s: %s\n" |
| msgstr "%s: 關閉錯誤 %s: %s\n" |
| |
| #: timezone/zic.c:902 |
| msgid "expected continuation line not found" |
| msgstr "找不到預期的接續行" |
| |
| #: timezone/zic.c:958 |
| msgid "wrong number of fields on Rule line" |
| msgstr "規則設定行的欄位數目錯誤" |
| |
| #: timezone/zic.c:962 |
| msgid "nameless rule" |
| msgstr "規則沒有名稱" |
| |
| #: timezone/zic.c:967 |
| msgid "invalid saved time" |
| msgstr "無效的節約時間" |
| |
| #: timezone/zic.c:986 |
| msgid "wrong number of fields on Zone line" |
| msgstr "時區設定行的欄位數目錯誤" |
| |
| #: timezone/zic.c:992 |
| #, c-format |
| msgid "\"Zone %s\" line and -l option are mutually exclusive" |
| msgstr "\"區段 %s\" 行和 -l 選項是互斥的" |
| |
| #: timezone/zic.c:1000 |
| #, c-format |
| msgid "\"Zone %s\" line and -p option are mutually exclusive" |
| msgstr "\"區段 %s\" 行和 -p 選項是互斥的" |
| |
| #: timezone/zic.c:1012 |
| #, c-format |
| msgid "duplicate zone name %s (file \"%s\", line %d)" |
| msgstr "複製時區名稱 %s (檔案 \"%s\", 第 %d 行)" |
| |
| #: timezone/zic.c:1028 |
| msgid "wrong number of fields on Zone continuation line" |
| msgstr "時區接續行的欄位數目不對" |
| |
| #: timezone/zic.c:1068 |
| msgid "invalid UTC offset" |
| msgstr "無效的 UTC 位移值" |
| |
| #: timezone/zic.c:1071 |
| msgid "invalid abbreviation format" |
| msgstr "無效的縮寫格式" |
| |
| #: timezone/zic.c:1097 |
| msgid "Zone continuation line end time is not after end time of previous line" |
| msgstr "時區接續行的結束時間不在上一行的結束時間之後" |
| |
| #: timezone/zic.c:1124 |
| msgid "wrong number of fields on Leap line" |
| msgstr "閏時設定行的欄位數目錯誤" |
| |
| #: timezone/zic.c:1133 |
| msgid "invalid leaping year" |
| msgstr "無效的閏年" |
| |
| #: timezone/zic.c:1148 timezone/zic.c:1252 |
| msgid "invalid month name" |
| msgstr "無效的月份名稱" |
| |
| #: timezone/zic.c:1161 timezone/zic.c:1374 timezone/zic.c:1388 |
| msgid "invalid day of month" |
| msgstr "無效的日期數字" |
| |
| #: timezone/zic.c:1166 |
| msgid "time before zero" |
| msgstr "在零之前的時間" |
| |
| #: timezone/zic.c:1170 |
| msgid "time too small" |
| msgstr "時間太小" |
| |
| #: timezone/zic.c:1174 |
| msgid "time too large" |
| msgstr "時間太大" |
| |
| #: timezone/zic.c:1178 timezone/zic.c:1281 |
| msgid "invalid time of day" |
| msgstr "無效的時間數字" |
| |
| #: timezone/zic.c:1197 |
| msgid "illegal CORRECTION field on Leap line" |
| msgstr "在閏時設定行中有不合法的 CORRECTION 欄位" |
| |
| #: timezone/zic.c:1201 |
| msgid "illegal Rolling/Stationary field on Leap line" |
| msgstr "在閏時設定行中有不合法的 Rolling/Stationary 欄位" |
| |
| #: timezone/zic.c:1216 |
| msgid "wrong number of fields on Link line" |
| msgstr "連結設定行的欄位數目錯誤" |
| |
| #: timezone/zic.c:1220 |
| msgid "blank FROM field on Link line" |
| msgstr "Link 行中空白的 FROM 欄位" |
| |
| #: timezone/zic.c:1224 |
| msgid "blank TO field on Link line" |
| msgstr "Link 行中空白的 TO 欄位" |
| |
| #: timezone/zic.c:1301 |
| msgid "invalid starting year" |
| msgstr "無效的起始年份" |
| |
| #: timezone/zic.c:1305 |
| msgid "starting year too low to be represented" |
| msgstr "起始年份太低,無法表示" |
| |
| #: timezone/zic.c:1307 |
| msgid "starting year too high to be represented" |
| msgstr "起始年份太高,無法表示" |
| |
| #: timezone/zic.c:1326 |
| msgid "invalid ending year" |
| msgstr "無效的結束年份" |
| |
| #: timezone/zic.c:1330 |
| msgid "ending year too low to be represented" |
| msgstr "結束年份太低,無法表示" |
| |
| #: timezone/zic.c:1332 |
| msgid "ending year too high to be represented" |
| msgstr "結束年份太高,無法表示" |
| |
| #: timezone/zic.c:1335 |
| msgid "starting year greater than ending year" |
| msgstr "起始年份比結束年份還要大" |
| |
| #: timezone/zic.c:1342 |
| msgid "typed single year" |
| msgstr "輸入的年份是同一年" |
| |
| #: timezone/zic.c:1379 |
| msgid "invalid weekday name" |
| msgstr "無效的工作日 (weekday) 名稱" |
| |
| #: timezone/zic.c:1494 |
| #, c-format |
| msgid "%s: Can't remove %s: %s\n" |
| msgstr "%s: 無法移除 %s: %s\n" |
| |
| #: timezone/zic.c:1504 |
| #, c-format |
| msgid "%s: Can't create %s: %s\n" |
| msgstr "%s: 無法產生 %s: %s\n" |
| |
| #: timezone/zic.c:1570 |
| #, c-format |
| msgid "%s: Error writing %s\n" |
| msgstr "%s: 寫入錯誤 %s\n" |
| |
| #: timezone/zic.c:1760 |
| msgid "can't determine time zone abbreviation to use just after until time" |
| msgstr "無法決定在結束時間 (untiltime) 以後該使用的時區簡寫" |
| |
| #: timezone/zic.c:1803 |
| msgid "too many transitions?!" |
| msgstr "太多時間轉換了?!" |
| |
| #: timezone/zic.c:1822 |
| msgid "internal error - addtype called with bad isdst" |
| msgstr "內部錯誤 - 用錯誤的 isdst 呼叫 addtype 函式" |
| |
| #: timezone/zic.c:1826 |
| msgid "internal error - addtype called with bad ttisstd" |
| msgstr "內部錯誤 - 用錯誤的 ttisstd 呼叫 addtype 函式" |
| |
| #: timezone/zic.c:1830 |
| msgid "internal error - addtype called with bad ttisgmt" |
| msgstr "內部錯誤 - 用錯誤的 ttisgmt 呼叫 addtype 函式" |
| |
| #: timezone/zic.c:1849 |
| msgid "too many local time types" |
| msgstr "太多本地時間格式了" |
| |
| #: timezone/zic.c:1877 |
| msgid "too many leap seconds" |
| msgstr "太多閏秒了" |
| |
| #: timezone/zic.c:1883 |
| msgid "repeated leap second moment" |
| msgstr "重複的閏秒設定" |
| |
| #: timezone/zic.c:1935 |
| msgid "Wild result from command execution" |
| msgstr "命令執行導至奇怪的結果" |
| |
| #: timezone/zic.c:1936 |
| #, c-format |
| msgid "%s: command was '%s', result was %d\n" |
| msgstr "%s: 輸入命令為 '%s', 結果為 %d\n" |
| |
| #: timezone/zic.c:2031 |
| msgid "Odd number of quotation marks" |
| msgstr "引號數目為奇數" |
| |
| #: timezone/zic.c:2051 timezone/zic.c:2070 |
| msgid "time overflow" |
| msgstr "時間溢位" |
| |
| #: timezone/zic.c:2117 |
| msgid "use of 2/29 in non leap-year" |
| msgstr "在非閏年時用到 2/29 日" |
| |
| #: timezone/zic.c:2151 |
| msgid "no day in month matches rule" |
| msgstr "在月份資料中找不到符合規則的日數" |
| |
| #: timezone/zic.c:2175 |
| msgid "too many, or too long, time zone abbreviations" |
| msgstr "時區縮寫太多或者太長了" |
| |
| #: timezone/zic.c:2216 |
| #, c-format |
| msgid "%s: Can't create directory %s: %s\n" |
| msgstr "%s: 無法建立目錄 %s: %s\n" |
| |
| #: timezone/zic.c:2238 |
| #, c-format |
| msgid "%s: %d did not sign extend correctly\n" |
| msgstr "%s: %d 無法正確地延展訊號\n" |
| |
| #: posix/../sysdeps/generic/wordexp.c:1797 |
| msgid "parameter null or not set" |
| msgstr "參數為空字元或是未設置" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:31 |
| msgid "Address family for hostname not supported" |
| msgstr "hostname 的位址族群不支援" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:32 |
| msgid "Temporary failure in name resolution" |
| msgstr "解析名稱時發生暫時性的錯誤" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:33 |
| msgid "Bad value for ai_flags" |
| msgstr "錯誤的 ai_flags 值" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:34 |
| msgid "Non-recoverable failure in name resolution" |
| msgstr "在解析名稱時發生嚴重的錯誤" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:35 |
| msgid "ai_family not supported" |
| msgstr "ai_family 沒有支援" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:36 |
| msgid "Memory allocation failure" |
| msgstr "記憶體配置失敗" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:37 |
| msgid "No address associated with hostname" |
| msgstr "沒有此主機名稱所對應的位址" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:38 |
| msgid "Name or service not known" |
| msgstr "未知的名稱或服務" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:39 |
| msgid "Servname not supported for ai_socktype" |
| msgstr "不支援 ai_socktype 的伺服名稱" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:40 |
| msgid "ai_socktype not supported" |
| msgstr "ai_socktype 沒有支援" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:41 |
| msgid "System error" |
| msgstr "系統錯誤" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:42 |
| msgid "Processing request in progress" |
| msgstr "此項請求已經在處理當中" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:43 |
| msgid "Request canceled" |
| msgstr "請求已被取消" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:44 |
| msgid "Request not canceled" |
| msgstr "請求並未取消" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:45 |
| msgid "All requests done" |
| msgstr "所有請求已完成" |
| |
| #: posix/../sysdeps/posix/gai_strerror.c:46 |
| msgid "Interrupted by a signal" |
| msgstr "由訊號所中斷" |
| |
| #: posix/getconf.c:892 |
| #, c-format |
| msgid "Usage: %s [-v specification] variable_name [pathname]\n" |
| msgstr "用法: %s [-v 規格] 變數名稱 [路徑名稱]\n" |
| |
| #: posix/getconf.c:950 |
| #, c-format |
| msgid "unknown specification \"%s\"" |
| msgstr "不明的規格 \"%s\"" |
| |
| #: posix/getconf.c:979 posix/getconf.c:995 |
| msgid "undefined" |
| msgstr "未定義" |
| |
| #: posix/getconf.c:1017 |
| #, c-format |
| msgid "Unrecognized variable `%s'" |
| msgstr "無法識別的變數 `%s'" |
| |
| #: posix/getopt.c:692 posix/getopt.c:711 |
| #, c-format |
| msgid "%s: option '%s' is ambiguous\n" |
| msgstr "%s: 選項 `%s' 含義不清\n" |
| |
| #: posix/getopt.c:744 posix/getopt.c:748 |
| #, c-format |
| msgid "%s: option '--%s' doesn't allow an argument\n" |
| msgstr "%s: 選項 `--%s' 不允許附加引數\n" |
| |
| #: posix/getopt.c:757 posix/getopt.c:762 |
| #, c-format |
| msgid "%s: option '%c%s' doesn't allow an argument\n" |
| msgstr "%s: 選項 `%c%s' 不允許附加引數\n" |
| |
| #: posix/getopt.c:807 posix/getopt.c:829 posix/getopt.c:1159 |
| #: posix/getopt.c:1181 |
| #, c-format |
| msgid "%s: option '%s' requires an argument\n" |
| msgstr "%s: 選項 `%s' 需要一個引數\n" |
| |
| #: posix/getopt.c:867 posix/getopt.c:870 |
| #, c-format |
| msgid "%s: unrecognized option '--%s'\n" |
| msgstr "%s: 未知的選項 `--%s'\n" |
| |
| #: posix/getopt.c:878 posix/getopt.c:881 |
| #, c-format |
| msgid "%s: unrecognized option '%c%s'\n" |
| msgstr "%s: 未知的選項 `%c%s'\n" |
| |
| #: posix/getopt.c:936 posix/getopt.c:939 |
| #, c-format |
| msgid "%s: illegal option -- '%c'\n" |
| msgstr "%s: 不合法的選項 -- %c\n" |
| |
| #: posix/getopt.c:945 posix/getopt.c:948 |
| #, c-format |
| msgid "%s: invalid option -- '%c'\n" |
| msgstr "%s: 不適用的選項 -- %c\n" |
| |
| #: posix/getopt.c:1003 posix/getopt.c:1022 posix/getopt.c:1234 |
| #: posix/getopt.c:1255 |
| #, c-format |
| msgid "%s: option requires an argument -- '%c'\n" |
| msgstr "%s: 選項需要一個引數 -- %c\n" |
| |
| #: posix/getopt.c:1074 posix/getopt.c:1093 |
| #, c-format |
| msgid "%s: option '-W %s' is ambiguous\n" |
| msgstr "%s: 選項 `-W %s' 含義不清\n" |
| |
| #: posix/getopt.c:1117 posix/getopt.c:1138 |
| #, c-format |
| msgid "%s: option '-W %s' doesn't allow an argument\n" |
| msgstr "%s: 選項 `-W %s' 不允許附加引數\n" |
| |
| #: posix/regcomp.c:150 |
| msgid "No match" |
| msgstr "沒有符合的項目" |
| |
| #: posix/regcomp.c:153 |
| msgid "Invalid regular expression" |
| msgstr "不適用的常規表示式" |
| |
| #: posix/regcomp.c:156 |
| msgid "Invalid collation character" |
| msgstr "不適用的對照字元" |
| |
| #: posix/regcomp.c:159 |
| msgid "Invalid character class name" |
| msgstr "不適用的字元類別名" |
| |
| #: posix/regcomp.c:162 |
| msgid "Trailing backslash" |
| msgstr "尾端的反斜線" |
| |
| #: posix/regcomp.c:165 |
| msgid "Invalid back reference" |
| msgstr "不適用的後部索引" |
| |
| #: posix/regcomp.c:168 |
| msgid "Unmatched [ or [^" |
| msgstr "[ 或 [^ 不能匹配" |
| |
| #: posix/regcomp.c:171 |
| msgid "Unmatched ( or \\(" |
| msgstr "( 或 \\( 不能匹配" |
| |
| #: posix/regcomp.c:174 |
| msgid "Unmatched \\{" |
| msgstr "\\{ 不能匹配" |
| |
| #: posix/regcomp.c:177 |
| msgid "Invalid content of \\{\\}" |
| msgstr "不適用的 \\{\\} 內容" |
| |
| #: posix/regcomp.c:180 |
| msgid "Invalid range end" |
| msgstr "不適用的範圍結束" |
| |
| #: posix/regcomp.c:183 |
| msgid "Memory exhausted" |
| msgstr "記憶體用完了" |
| |
| #: posix/regcomp.c:186 |
| msgid "Invalid preceding regular expression" |
| msgstr "不適用的前置常規表示式" |
| |
| #: posix/regcomp.c:189 |
| msgid "Premature end of regular expression" |
| msgstr "常規表示式太早結束了" |
| |
| #: posix/regcomp.c:192 |
| msgid "Regular expression too big" |
| msgstr "正規表示式太長了" |
| |
| #: posix/regcomp.c:195 |
| msgid "Unmatched ) or \\)" |
| msgstr ") 或 \\) 不能匹配" |
| |
| #: posix/regcomp.c:661 |
| msgid "No previous regular expression" |
| msgstr "先前並未使用過常規表示式" |
| |
| #: argp/argp-help.c:224 |
| #, c-format |
| msgid "%.*s: ARGP_HELP_FMT parameter requires a value" |
| msgstr "%.*s: ARGP_HELP_FMT 參數需要一個值" |
| |
| #: argp/argp-help.c:233 |
| #, c-format |
| msgid "%.*s: Unknown ARGP_HELP_FMT parameter" |
| msgstr "%.*s: 未知的 ARGP_HELP_FMT 參數" |
| |
| #: argp/argp-help.c:245 |
| #, c-format |
| msgid "Garbage in ARGP_HELP_FMT: %s" |
| msgstr "ARGP_HELP_FMT 中無用的資訊: %s" |
| |
| #: argp/argp-help.c:1205 |
| msgid "Mandatory or optional arguments to long options are also mandatory or optional for any corresponding short options." |
| msgstr "長選項的必須或可選用的引數也是相對應短選項的必須或可選用的引數。" |
| |
| #: argp/argp-help.c:1592 |
| msgid "Usage:" |
| msgstr "使用方式:" |
| |
| #: argp/argp-help.c:1596 |
| msgid " or: " |
| msgstr " 或者: " |
| |
| #: argp/argp-help.c:1608 |
| msgid " [OPTION...]" |
| msgstr " [參數...]" |
| |
| #: argp/argp-help.c:1635 |
| #, c-format |
| msgid "Try `%s --help' or `%s --usage' for more information.\n" |
| msgstr "請試著用 `%s --help' 或 `%s --usage' 來獲得更多相關訊息。\n" |
| |
| #: argp/argp-help.c:1663 |
| #, c-format |
| msgid "Report bugs to %s.\n" |
| msgstr "請將程式問題回報至 %s。\n" |
| |
| #: argp/argp-parse.c:115 |
| msgid "Give this help list" |
| msgstr "給出這個使用方式列表" |
| |
| #: argp/argp-parse.c:116 |
| msgid "Give a short usage message" |
| msgstr "給出簡短的使用訊息" |
| |
| #: argp/argp-parse.c:117 |
| msgid "Set the program name" |
| msgstr "設定程式名稱" |
| |
| #: argp/argp-parse.c:119 |
| msgid "Hang for SECS seconds (default 3600)" |
| msgstr "SECS 秒後掛斷 (預設是 3600)" |
| |
| #: argp/argp-parse.c:180 |
| msgid "Print program version" |
| msgstr "印出程式版本" |
| |
| #: argp/argp-parse.c:196 |
| msgid "(PROGRAM ERROR) No version known!?" |
| msgstr "(程式錯誤) 沒有認得的版本!?" |
| |
| #: argp/argp-parse.c:672 |
| #, c-format |
| msgid "%s: Too many arguments\n" |
| msgstr "%s: 太多的引數\n" |
| |
| #: argp/argp-parse.c:813 |
| msgid "(PROGRAM ERROR) Option should have been recognized!?" |
| msgstr "(程式錯誤) 選項應該已經可辯識!?" |
| |
| #: resolv/herror.c:68 |
| msgid "Resolver Error 0 (no error)" |
| msgstr "解讀錯誤碼 0 (沒有錯誤)" |
| |
| #: resolv/herror.c:69 |
| msgid "Unknown host" |
| msgstr "未知的遠端位址" |
| |
| #: resolv/herror.c:70 |
| msgid "Host name lookup failure" |
| msgstr "遠端系統名稱搜尋失敗" |
| |
| #: resolv/herror.c:71 |
| msgid "Unknown server error" |
| msgstr "未知的伺服器錯誤" |
| |
| #: resolv/herror.c:72 |
| msgid "No address associated with name" |
| msgstr "沒有此名稱所對應的位址" |
| |
| #: resolv/herror.c:108 |
| msgid "Resolver internal error" |
| msgstr "內部解讀錯誤" |
| |
| #: resolv/herror.c:111 |
| msgid "Unknown resolver error" |
| msgstr "未知的解讀錯誤" |
| |
| #: resolv/res_hconf.c:147 |
| #, c-format |
| msgid "%s: line %d: expected service, found `%s'\n" |
| msgstr "%s: 第 %d 列: 期待一項服務,卻發現 `%s'\n" |
| |
| #: resolv/res_hconf.c:165 |
| #, c-format |
| msgid "%s: line %d: cannot specify more than %d services" |
| msgstr "%s: 第 %d 列: 無法指定超過 %d 個服務" |
| |
| #: resolv/res_hconf.c:191 |
| #, c-format |
| msgid "%s: line %d: list delimiter not followed by keyword" |
| msgstr "%s: 第 %d 列: 關鍵字不可跟在表列分隔字元之後" |
| |
| #: resolv/res_hconf.c:231 |
| #, c-format |
| msgid "%s: line %d: cannot specify more than %d trim domains" |
| msgstr "%s: 第 %d 列: 無法指定超過 %d 個修剪範圍" |
| |
| #: resolv/res_hconf.c:256 |
| #, c-format |
| msgid "%s: line %d: list delimiter not followed by domain" |
| msgstr "%s: 第 %d 列: 範圍不可跟在表列分隔字元之後" |
| |
| #: resolv/res_hconf.c:319 |
| #, c-format |
| msgid "%s: line %d: expected `on' or `off', found `%s'\n" |
| msgstr "%s: 第 %d 列: 預期為 `on' 或 `off',卻發現 `%s'\n" |
| |
| #: resolv/res_hconf.c:366 |
| #, c-format |
| msgid "%s: line %d: bad command `%s'\n" |
| msgstr "%s: 第 %d 列: 不當的命令 `%s'\n" |
| |
| #: resolv/res_hconf.c:395 |
| #, c-format |
| msgid "%s: line %d: ignoring trailing garbage `%s'\n" |
| msgstr "%s: 第 %d 列: 正在忽略尾端的無用資料 `%s'\n" |
| |
| #: nss/getent.c:51 |
| msgid "database [key ...]" |
| msgstr "資料庫 [鍵值...]" |
| |
| #: nss/getent.c:56 |
| msgid "Service configuration to be used" |
| msgstr "將要使用的服務設定" |
| |
| #: nss/getent.c:136 nss/getent.c:375 |
| #, c-format |
| msgid "Enumeration not supported on %s\n" |
| msgstr "此項目在 %s 中不被支援\n" |
| |
| #: nss/getent.c:800 |
| msgid "getent - get entries from administrative database." |
| msgstr "getent - 從管理資料庫中取得項目內容。" |
| |
| #: nss/getent.c:801 |
| msgid "Supported databases:" |
| msgstr "支援的資料庫:" |
| |
| #: nss/getent.c:858 nscd/nscd.c:131 nscd/nscd_nischeck.c:64 |
| msgid "wrong number of arguments" |
| msgstr "參數數目不對" |
| |
| #: nss/getent.c:868 |
| #, c-format |
| msgid "Unknown database: %s\n" |
| msgstr "未知的資料庫: %s\n" |
| |
| #: debug/pcprofiledump.c:52 |
| msgid "Don't buffer output" |
| msgstr "不要將輸入存入緩衝區" |
| |
| #: debug/pcprofiledump.c:57 |
| msgid "Dump information generated by PC profiling." |
| msgstr "將產生於 PC 測速評估的資料傾卸出來" |
| |
| #: debug/pcprofiledump.c:60 |
| msgid "[FILE]" |
| msgstr "[檔案]" |
| |
| #: debug/pcprofiledump.c:100 |
| msgid "cannot open input file" |
| msgstr "無法開啟輸入檔" |
| |
| #: debug/pcprofiledump.c:106 |
| msgid "cannot read header" |
| msgstr "無法讀取標頭資料" |
| |
| #: debug/pcprofiledump.c:170 |
| msgid "invalid pointer size" |
| msgstr "無效的指標大小" |
| |
| #: inet/rcmd.c:163 inet/rcmd.c:166 |
| msgid "rcmd: Cannot allocate memory\n" |
| msgstr "rcmd: 無法配置記憶體\n" |
| |
| #: inet/rcmd.c:185 inet/rcmd.c:188 |
| msgid "rcmd: socket: All ports in use\n" |
| msgstr "rcmd: socket: 所有的埠都在使用中\n" |
| |
| #: inet/rcmd.c:222 |
| #, c-format |
| msgid "connect to address %s: " |
| msgstr "連接到位址 %s: " |
| |
| #: inet/rcmd.c:240 |
| #, c-format |
| msgid "Trying %s...\n" |
| msgstr "嘗試 %s...\n" |
| |
| #: inet/rcmd.c:289 |
| #, c-format |
| msgid "rcmd: write (setting up stderr): %m\n" |
| msgstr "rcmd: write (正在設定標準錯誤輸出): %m\n" |
| |
| #: inet/rcmd.c:310 |
| #, c-format |
| msgid "rcmd: poll (setting up stderr): %m\n" |
| msgstr "rcmd: poll (正在設定標準錯誤輸出): %m\n" |
| |
| #: inet/rcmd.c:313 |
| msgid "poll: protocol failure in circuit setup\n" |
| msgstr "poll: 通訊協定在設定線路時失效\n" |
| |
| #: inet/rcmd.c:358 |
| msgid "socket: protocol failure in circuit setup\n" |
| msgstr "socket: 通訊協定在設定線路時失效\n" |
| |
| #: inet/rcmd.c:387 |
| #, c-format |
| msgid "rcmd: %s: short read" |
| msgstr "rcmd: %s: 讀入資料過短" |
| |
| #: inet/rcmd.c:549 |
| msgid "lstat failed" |
| msgstr "lstat 失敗" |
| |
| #: inet/rcmd.c:551 |
| msgid "not regular file" |
| msgstr "並非正常的檔案" |
| |
| #: inet/rcmd.c:556 |
| msgid "cannot open" |
| msgstr "無法開啟" |
| |
| #: inet/rcmd.c:558 |
| msgid "fstat failed" |
| msgstr "fstat 失敗" |
| |
| #: inet/rcmd.c:560 |
| msgid "bad owner" |
| msgstr "錯誤的擁有者" |
| |
| #: inet/rcmd.c:562 |
| msgid "writeable by other than owner" |
| msgstr "使用者以外的人亦可寫入" |
| |
| #: inet/rcmd.c:564 |
| msgid "hard linked somewhere" |
| msgstr "被實體連結到某處" |
| |
| #: inet/ruserpass.c:170 inet/ruserpass.c:193 |
| msgid "out of memory" |
| msgstr "記憶體不足" |
| |
| #: inet/ruserpass.c:184 |
| msgid "Error: .netrc file is readable by others." |
| msgstr "錯誤: .netrc 檔可以被別人讀取" |
| |
| #: inet/ruserpass.c:185 |
| msgid "Remove password or make file unreadable by others." |
| msgstr "移除密碼或讓他人無法讀取檔案" |
| |
| #: inet/ruserpass.c:277 |
| #, c-format |
| msgid "Unknown .netrc keyword %s" |
| msgstr "未知的 .netrc 關鍵字 %s" |
| |
| #: sunrpc/auth_unix.c:115 sunrpc/auth_unix.c:118 |
| msgid "authunix_create: out of memory\n" |
| msgstr "authunix_create: 記憶體不足\n" |
| |
| #: sunrpc/auth_unix.c:318 |
| msgid "auth_none.c - Fatal marshalling problem" |
| msgstr "auth_none.c - 嚴重的排序問題" |
| |
| #: sunrpc/clnt_perr.c:118 sunrpc/clnt_perr.c:139 |
| #, c-format |
| msgid "; low version = %lu, high version = %lu" |
| msgstr "; 低版本 = %lu, 高版本 = %lu" |
| |
| #: sunrpc/clnt_perr.c:125 |
| msgid "; why = " |
| msgstr "; 原因 = " |
| |
| #: sunrpc/clnt_perr.c:132 |
| #, c-format |
| msgid "(unknown authentication error - %d)" |
| msgstr "(未知鑑定錯誤 - %d)" |
| |
| #: sunrpc/clnt_perr.c:177 |
| msgid "RPC: Success" |
| msgstr "RPC: 成功" |
| |
| #: sunrpc/clnt_perr.c:180 |
| msgid "RPC: Can't encode arguments" |
| msgstr "RPC: 無法將引數編碼" |
| |
| #: sunrpc/clnt_perr.c:184 |
| msgid "RPC: Can't decode result" |
| msgstr "RPC: 無法解碼得出結果" |
| |
| #: sunrpc/clnt_perr.c:188 |
| msgid "RPC: Unable to send" |
| msgstr "RPC: 無法傳送" |
| |
| #: sunrpc/clnt_perr.c:192 |
| msgid "RPC: Unable to receive" |
| msgstr "RPC: 無法接收" |
| |
| #: sunrpc/clnt_perr.c:196 |
| msgid "RPC: Timed out" |
| msgstr "RPC: 超過時間上限" |
| |
| #: sunrpc/clnt_perr.c:200 |
| msgid "RPC: Incompatible versions of RPC" |
| msgstr "RPC: RPC 版本不相容" |
| |
| #: sunrpc/clnt_perr.c:204 |
| msgid "RPC: Authentication error" |
| msgstr "RPC: 認證錯誤" |
| |
| #: sunrpc/clnt_perr.c:208 |
| msgid "RPC: Program unavailable" |
| msgstr "RPC: 程式不存在" |
| |
| #: sunrpc/clnt_perr.c:212 |
| msgid "RPC: Program/version mismatch" |
| msgstr "RPC: 程式/版本不符" |
| |
| #: sunrpc/clnt_perr.c:216 |
| msgid "RPC: Procedure unavailable" |
| msgstr "RPC: 無法取得程序" |
| |
| #: sunrpc/clnt_perr.c:220 |
| msgid "RPC: Server can't decode arguments" |
| msgstr "RPC: 伺服器無法將引數解碼" |
| |
| #: sunrpc/clnt_perr.c:224 |
| msgid "RPC: Remote system error" |
| msgstr "RPC: 遠端程式錯誤" |
| |
| #: sunrpc/clnt_perr.c:228 |
| msgid "RPC: Unknown host" |
| msgstr "RPC: 未知的遠端位址" |
| |
| #: sunrpc/clnt_perr.c:232 |
| msgid "RPC: Unknown protocol" |
| msgstr "RPC: 未知的協定" |
| |
| #: sunrpc/clnt_perr.c:236 |
| msgid "RPC: Port mapper failure" |
| msgstr "RPC: 通訊阜對映錯誤" |
| |
| #: sunrpc/clnt_perr.c:240 |
| msgid "RPC: Program not registered" |
| msgstr "RPC: 程式沒有註冊" |
| |
| #: sunrpc/clnt_perr.c:244 |
| msgid "RPC: Failed (unspecified error)" |
| msgstr "RPC: 失敗 (非特定的錯誤)" |
| |
| #: sunrpc/clnt_perr.c:285 |
| msgid "RPC: (unknown error code)" |
| msgstr "RPC: (未知的錯誤碼)" |
| |
| #: sunrpc/clnt_perr.c:357 |
| msgid "Authentication OK" |
| msgstr "鑑定完成" |
| |
| #: sunrpc/clnt_perr.c:360 |
| msgid "Invalid client credential" |
| msgstr "不適用的請求端身份認證" |
| |
| #: sunrpc/clnt_perr.c:364 |
| msgid "Server rejected credential" |
| msgstr "伺服器拒絕身份證明" |
| |
| #: sunrpc/clnt_perr.c:368 |
| msgid "Invalid client verifier" |
| msgstr "不適用的請求端認證" |
| |
| #: sunrpc/clnt_perr.c:372 |
| msgid "Server rejected verifier" |
| msgstr "伺服器拒絕認證" |
| |
| #: sunrpc/clnt_perr.c:376 |
| msgid "Client credential too weak" |
| msgstr "用戶端背景太弱" |
| |
| #: sunrpc/clnt_perr.c:380 |
| msgid "Invalid server verifier" |
| msgstr "不適用的服務認證" |
| |
| #: sunrpc/clnt_perr.c:384 |
| msgid "Failed (unspecified error)" |
| msgstr "失敗 (沒有指定的錯誤)" |
| |
| #: sunrpc/clnt_raw.c:117 |
| msgid "clnt_raw.c - Fatal header serialization error." |
| msgstr "clnt_raw.c - 嚴重的標頭序列化錯誤。" |
| |
| #: sunrpc/clnt_tcp.c:134 sunrpc/clnt_tcp.c:137 |
| msgid "clnttcp_create: out of memory\n" |
| msgstr "clnttcp_create: 記憶體不足\n" |
| |
| #: sunrpc/clnt_udp.c:141 sunrpc/clnt_udp.c:144 |
| msgid "clntudp_create: out of memory\n" |
| msgstr "clntudp_create: 記憶體不足\n" |
| |
| #: sunrpc/clnt_unix.c:131 sunrpc/clnt_unix.c:134 |
| msgid "clntunix_create: out of memory\n" |
| msgstr "clntunix_create: 記憶體不足\n" |
| |
| #: sunrpc/get_myaddr.c:78 |
| msgid "get_myaddress: ioctl (get interface configuration)" |
| msgstr "get_myaddress: ioctl (取得介面設定資料)" |
| |
| #: sunrpc/pm_getmaps.c:74 |
| msgid "pmap_getmaps rpc problem" |
| msgstr "pmap_getmaps 遠端程序呼叫問題" |
| |
| #: sunrpc/pmap_clnt.c:72 |
| msgid "__get_myaddress: ioctl (get interface configuration)" |
| msgstr "__get_myaddress: ioctl (取得介面組態)" |
| |
| #: sunrpc/pmap_clnt.c:137 |
| msgid "Cannot register service" |
| msgstr "無法註冊服務" |
| |
| #: sunrpc/pmap_rmt.c:190 |
| msgid "broadcast: ioctl (get interface configuration)" |
| msgstr "broadcast: ioctl (取得介面設定值)" |
| |
| #: sunrpc/pmap_rmt.c:199 |
| msgid "broadcast: ioctl (get interface flags)" |
| msgstr "broadcast: ioctl (取得介面旗標)" |
| |
| #: sunrpc/pmap_rmt.c:269 |
| msgid "Cannot create socket for broadcast rpc" |
| msgstr "無法為廣播式遠端程序呼叫 (broadcast rpc) 產生 socket" |
| |
| #: sunrpc/pmap_rmt.c:276 |
| msgid "Cannot set socket option SO_BROADCAST" |
| msgstr "無法設定 socket 選項 SO_BROADCAST" |
| |
| #: sunrpc/pmap_rmt.c:328 |
| msgid "Cannot send broadcast packet" |
| msgstr "無法傳送廣播封包" |
| |
| #: sunrpc/pmap_rmt.c:353 |
| msgid "Broadcast poll problem" |
| msgstr "Broadcast 調查有問題" |
| |
| #: sunrpc/pmap_rmt.c:366 |
| msgid "Cannot receive reply to broadcast" |
| msgstr "無法接受廣播後的回應" |
| |
| #: sunrpc/rpc_main.c:288 |
| #, c-format |
| msgid "%s: output would overwrite %s\n" |
| msgstr "%s: 輸出將會覆蓋 %s\n" |
| |
| #: sunrpc/rpc_main.c:295 |
| #, c-format |
| msgid "%s: unable to open %s: %m\n" |
| msgstr "%s: 無法開啟 %s: %m\n" |
| |
| #: sunrpc/rpc_main.c:307 |
| #, c-format |
| msgid "%s: while writing output %s: %m" |
| msgstr "%s: 當在寫出輸出 %s 時: %m" |
| |
| #: sunrpc/rpc_main.c:342 |
| #, c-format |
| msgid "cannot find C preprocessor: %s \n" |
| msgstr "找不到 C 前置處理器: %s \n" |
| |
| #: sunrpc/rpc_main.c:350 |
| msgid "cannot find any C preprocessor (cpp)\n" |
| msgstr "找不到任何 C 前置處理器 (cpp)\n" |
| |
| #: sunrpc/rpc_main.c:419 |
| #, c-format |
| msgid "%s: C preprocessor failed with signal %d\n" |
| msgstr "%s: C 前置處理器失效,其訊號值為 %d\n" |
| |
| #: sunrpc/rpc_main.c:422 |
| #, c-format |
| msgid "%s: C preprocessor failed with exit code %d\n" |
| msgstr "%s: C 前置處理器失效,其結束碼為 %d\n" |
| |
| #: sunrpc/rpc_main.c:462 |
| #, c-format |
| msgid "illegal nettype :`%s'\n" |
| msgstr "不合法的 nettype :`%s'\n" |
| |
| #: sunrpc/rpc_main.c:1104 |
| #, c-format |
| msgid "rpcgen: too many defines\n" |
| msgstr "rpcgen: 太多 define 了\n" |
| |
| #: sunrpc/rpc_main.c:1116 |
| #, c-format |
| msgid "rpcgen: arglist coding error\n" |
| msgstr "rpcgen: arglist 編碼錯誤\n" |
| |
| #. TRANS: the file will not be removed; this is an |
| #. TRANS: informative message. |
| #: sunrpc/rpc_main.c:1149 |
| #, c-format |
| msgid "file `%s' already exists and may be overwritten\n" |
| msgstr "檔案 `%s' 已經存在並有可能會被覆蓋掉\n" |
| |
| #: sunrpc/rpc_main.c:1194 |
| #, c-format |
| msgid "Cannot specify more than one input file!\n" |
| msgstr "無法指定超過一個輸入檔!\n" |
| |
| #: sunrpc/rpc_main.c:1364 |
| msgid "This implementation doesn't support newstyle or MT-safe code!\n" |
| msgstr "此實作方式不支援新的形式或多安全執行序的程式!\n" |
| |
| #: sunrpc/rpc_main.c:1373 |
| #, c-format |
| msgid "Cannot use netid flag with inetd flag!\n" |
| msgstr "無法將 netid 旗標與 inetd 旗標一起使用!\n" |
| |
| #: sunrpc/rpc_main.c:1385 |
| msgid "Cannot use netid flag without TIRPC!\n" |
| msgstr "無法在沒有 TIRPC 時使用 netid 旗標!\n" |
| |
| #: sunrpc/rpc_main.c:1392 |
| msgid "Cannot use table flags with newstyle!\n" |
| msgstr "無法將表格旗標與 newstyle 一起使用!\n" |
| |
| #: sunrpc/rpc_main.c:1411 |
| #, c-format |
| msgid "\"infile\" is required for template generation flags.\n" |
| msgstr "\"infile\" 是樣版產生旗標所需的\n" |
| |
| #: sunrpc/rpc_main.c:1416 |
| #, c-format |
| msgid "Cannot have more than one file generation flag!\n" |
| msgstr "無法使用超過一個的檔案產生旗標!\n" |
| |
| #: sunrpc/rpc_main.c:1425 |
| #, c-format |
| msgid "usage: %s infile\n" |
| msgstr "用法: %s infile\n" |
| |
| #: sunrpc/rpc_main.c:1426 |
| #, c-format |
| msgid "\t%s [-abkCLNTM][-Dname[=value]] [-i size] [-I [-K seconds]] [-Y path] infile\n" |
| msgstr "\t%s [-abkCLNTM][-D名稱[=值]] [-i 大小] [-I [-K 秒數]] [-Y 路徑] 輸入檔案\n" |
| |
| #: sunrpc/rpc_main.c:1428 |
| #, c-format |
| msgid "\t%s [-c | -h | -l | -m | -t | -Sc | -Ss | -Sm] [-o outfile] [infile]\n" |
| msgstr "\t%s [-c | -h | -l | -m | -t | -Sc | -Ss | -Sm] [-o 輸出檔案] [輸入檔案]\n" |
| |
| #: sunrpc/rpc_main.c:1430 |
| #, c-format |
| msgid "\t%s [-s nettype]* [-o outfile] [infile]\n" |
| msgstr "\t%s [-s 網路型態]* [-o 輸出檔案] [輸入檔案]\n" |
| |
| #: sunrpc/rpc_main.c:1431 |
| #, c-format |
| msgid "\t%s [-n netid]* [-o outfile] [infile]\n" |
| msgstr "\t%s [-n 網路識別符號]* [-o 輸出檔案] [輸入檔案]\n" |
| |
| #: sunrpc/rpc_scan.c:116 |
| msgid "constant or identifier expected" |
| msgstr "應該要有常數或識別符號才對" |
| |
| #: sunrpc/rpc_scan.c:312 |
| msgid "illegal character in file: " |
| msgstr "檔案中有不合法的字元: " |
| |
| #: sunrpc/rpc_scan.c:351 sunrpc/rpc_scan.c:377 |
| msgid "unterminated string constant" |
| msgstr "沒有結尾的字串常數" |
| |
| #: sunrpc/rpc_scan.c:383 |
| msgid "empty char string" |
| msgstr "空的字元字串" |
| |
| #: sunrpc/rpc_scan.c:525 sunrpc/rpc_scan.c:535 |
| msgid "preprocessor error" |
| msgstr "前置處理器錯誤" |
| |
| #: sunrpc/rpcinfo.c:237 sunrpc/rpcinfo.c:383 |
| #, c-format |
| msgid "program %lu is not available\n" |
| msgstr "程式 %lu 不存在\n" |
| |
| #: sunrpc/rpcinfo.c:264 sunrpc/rpcinfo.c:310 sunrpc/rpcinfo.c:333 |
| #: sunrpc/rpcinfo.c:407 sunrpc/rpcinfo.c:453 sunrpc/rpcinfo.c:476 |
| #: sunrpc/rpcinfo.c:510 |
| #, c-format |
| msgid "program %lu version %lu is not available\n" |
| msgstr "程式 %lu 的第 %lu 版並不存在\n" |
| |
| #: sunrpc/rpcinfo.c:515 |
| #, c-format |
| msgid "program %lu version %lu ready and waiting\n" |
| msgstr "程式 %lu 的第 %lu 版已經就緒並等待服務中\n" |
| |
| #: sunrpc/rpcinfo.c:556 sunrpc/rpcinfo.c:563 |
| msgid "rpcinfo: can't contact portmapper" |
| msgstr "rpcinfo: 無法建立跟 portmapper 之間的連線" |
| |
| #: sunrpc/rpcinfo.c:570 |
| msgid "No remote programs registered.\n" |
| msgstr "沒有註冊過的遠端應用程式\n" |
| |
| #: sunrpc/rpcinfo.c:574 |
| msgid " program vers proto port\n" |
| msgstr " 程式採用的協定連接阜\n" |
| |
| #: sunrpc/rpcinfo.c:613 |
| msgid "(unknown)" |
| msgstr "(未知)" |
| |
| #: sunrpc/rpcinfo.c:637 |
| #, c-format |
| msgid "rpcinfo: broadcast failed: %s\n" |
| msgstr "rpcinfo: 廣播失敗: %s\n" |
| |
| #: sunrpc/rpcinfo.c:658 |
| msgid "Sorry. You are not root\n" |
| msgstr "不好意思,你並不是 root 使用者\n" |
| |
| #: sunrpc/rpcinfo.c:665 |
| #, c-format |
| msgid "rpcinfo: Could not delete registration for prog %s version %s\n" |
| msgstr "rpcinfo: 無法刪除程式 %s (第 %s 版) 的註冊資料\n" |
| |
| #: sunrpc/rpcinfo.c:674 |
| msgid "Usage: rpcinfo [ -n portnum ] -u host prognum [ versnum ]\n" |
| msgstr "使用方式: rpcinfo [ -n portnum ] -u host prognum [ versnum ]\n" |
| |
| #: sunrpc/rpcinfo.c:676 |
| msgid " rpcinfo [ -n portnum ] -t host prognum [ versnum ]\n" |
| msgstr " rpcinfo [ -n portnum ] -t host prognum [ versnum ]\n" |
| |
| #: sunrpc/rpcinfo.c:678 |
| msgid " rpcinfo -p [ host ]\n" |
| msgstr " rpcinfo -p [ host ]\n" |
| |
| #: sunrpc/rpcinfo.c:679 |
| msgid " rpcinfo -b prognum versnum\n" |
| msgstr " rpcinfo -b prognum versnum\n" |
| |
| #: sunrpc/rpcinfo.c:680 |
| msgid " rpcinfo -d prognum versnum\n" |
| msgstr " rpcinfo -d prognum versnum\n" |
| |
| #: sunrpc/rpcinfo.c:695 |
| #, c-format |
| msgid "rpcinfo: %s is unknown service\n" |
| msgstr "rpcinfo: %s 是不明的服務\n" |
| |
| #: sunrpc/rpcinfo.c:732 |
| #, c-format |
| msgid "rpcinfo: %s is unknown host\n" |
| msgstr "rpcinfo: %s 是不明的主機\n" |
| |
| #: sunrpc/svc_run.c:76 |
| msgid "svc_run: - poll failed" |
| msgstr "svc_run: - poll 失敗" |
| |
| #: sunrpc/svc_simple.c:87 |
| #, c-format |
| msgid "can't reassign procedure number %ld\n" |
| msgstr "不能重複指定程序號碼 %ld\n" |
| |
| #: sunrpc/svc_simple.c:96 |
| msgid "couldn't create an rpc server\n" |
| msgstr "不能產生遠端程序呼叫伺服程式\n" |
| |
| #: sunrpc/svc_simple.c:104 |
| #, c-format |
| msgid "couldn't register prog %ld vers %ld\n" |
| msgstr "不能將程式 %ld 註冊到 %ld\n" |
| |
| #: sunrpc/svc_simple.c:111 |
| msgid "registerrpc: out of memory\n" |
| msgstr "registerrpc: 記憶體不足\n" |
| |
| #: sunrpc/svc_simple.c:175 |
| #, c-format |
| msgid "trouble replying to prog %d\n" |
| msgstr "回應程式 %d 時發生困難\n" |
| |
| #: sunrpc/svc_simple.c:183 |
| #, c-format |
| msgid "never registered prog %d\n" |
| msgstr "千萬不要註冊程式 %d\n" |
| |
| #: sunrpc/svc_tcp.c:155 |
| msgid "svc_tcp.c - tcp socket creation problem" |
| msgstr "svc_tcp.c - tcp socket 建立發生問題" |
| |
| #: sunrpc/svc_tcp.c:170 |
| msgid "svc_tcp.c - cannot getsockname or listen" |
| msgstr "svc_tcp.c - 無法 getsockname 或 listen" |
| |
| #: sunrpc/svc_tcp.c:181 sunrpc/svc_tcp.c:184 |
| msgid "svctcp_create: out of memory\n" |
| msgstr "svctcp_create: 記憶體不足\n" |
| |
| #: sunrpc/svc_tcp.c:225 sunrpc/svc_tcp.c:228 |
| msgid "svc_tcp: makefd_xprt: out of memory\n" |
| msgstr "svc_tcp: makefd_xprt: 記憶體不足\n" |
| |
| #: sunrpc/svc_udp.c:128 |
| msgid "svcudp_create: socket creation problem" |
| msgstr "svcudp_create: socket 建立有問題" |
| |
| #: sunrpc/svc_udp.c:142 |
| msgid "svcudp_create - cannot getsockname" |
| msgstr "svcudp_create - 無法 getsockname" |
| |
| #: sunrpc/svc_udp.c:154 sunrpc/svc_udp.c:157 |
| msgid "svcudp_create: out of memory\n" |
| msgstr "svcudp_create: 記憶體不足\n" |
| |
| #: sunrpc/svc_udp.c:182 sunrpc/svc_udp.c:185 |
| msgid "svcudp_create: xp_pad is too small for IP_PKTINFO\n" |
| msgstr "svcudp_create: xp_pad 太小以致於無法 IP_PKTINFO\n" |
| |
| #: sunrpc/svc_udp.c:493 |
| msgid "enablecache: cache already enabled" |
| msgstr "enablecache: 快取已經開啟" |
| |
| #: sunrpc/svc_udp.c:499 |
| msgid "enablecache: could not allocate cache" |
| msgstr "enablecache: 無法配置快取" |
| |
| #: sunrpc/svc_udp.c:507 |
| msgid "enablecache: could not allocate cache data" |
| msgstr "enablecache: 無法配置快取資料" |
| |
| #: sunrpc/svc_udp.c:514 |
| msgid "enablecache: could not allocate cache fifo" |
| msgstr "enablecache: 無法配置快取 fifo 管線" |
| |
| #: sunrpc/svc_udp.c:550 |
| msgid "cache_set: victim not found" |
| msgstr "cache_set: 找不到 victim" |
| |
| #: sunrpc/svc_udp.c:561 |
| msgid "cache_set: victim alloc failed" |
| msgstr "cache_set: victim 配置失敗" |
| |
| #: sunrpc/svc_udp.c:567 |
| msgid "cache_set: could not allocate new rpc_buffer" |
| msgstr "cache_set: 無法配置新的遠端程序呼叫緩衝區 (rpc_buffer)" |
| |
| #: sunrpc/svc_unix.c:150 |
| msgid "svc_unix.c - AF_UNIX socket creation problem" |
| msgstr "svc_unix.c - AF_UNIX socket 建立有問題" |
| |
| #: sunrpc/svc_unix.c:166 |
| msgid "svc_unix.c - cannot getsockname or listen" |
| msgstr "svc_unix.c - 無法 getsockname 或 listen" |
| |
| #: sunrpc/svc_unix.c:178 sunrpc/svc_unix.c:181 |
| msgid "svcunix_create: out of memory\n" |
| msgstr "svcunix_create: 記憶體不足\n" |
| |
| #: sunrpc/svc_unix.c:222 sunrpc/svc_unix.c:225 |
| msgid "svc_unix: makefd_xprt: out of memory\n" |
| msgstr "svc_unix: makefd_xprt: 記憶體不足\n" |
| |
| #: sunrpc/xdr.c:570 sunrpc/xdr.c:573 |
| msgid "xdr_bytes: out of memory\n" |
| msgstr "xdr_bytes: 記憶體不足\n" |
| |
| #: sunrpc/xdr.c:728 sunrpc/xdr.c:731 |
| msgid "xdr_string: out of memory\n" |
| msgstr "xdr_string: 記憶體不足\n" |
| |
| #: sunrpc/xdr_array.c:111 sunrpc/xdr_array.c:114 |
| msgid "xdr_array: out of memory\n" |
| msgstr "xdr_array: 記憶體不足\n" |
| |
| #: sunrpc/xdr_rec.c:158 sunrpc/xdr_rec.c:161 |
| msgid "xdrrec_create: out of memory\n" |
| msgstr "xdrrec_create: 記憶體不足\n" |
| |
| #: sunrpc/xdr_ref.c:88 sunrpc/xdr_ref.c:91 |
| msgid "xdr_reference: out of memory\n" |
| msgstr "xdr_reference: 記憶體不足\n" |
| |
| #: nis/nis_callback.c:189 |
| msgid "unable to free arguments" |
| msgstr "無法釋放參數" |
| |
| #: nis/nis_error.c:30 |
| msgid "Probable success" |
| msgstr "可能成功" |
| |
| #: nis/nis_error.c:31 |
| msgid "Not found" |
| msgstr "找不到" |
| |
| #: nis/nis_error.c:32 |
| msgid "Probably not found" |
| msgstr "可能找不到" |
| |
| #: nis/nis_error.c:33 |
| msgid "Cache expired" |
| msgstr "快取過時取消了" |
| |
| #: nis/nis_error.c:34 |
| msgid "NIS+ servers unreachable" |
| msgstr "NIS+ 伺服器無法連線" |
| |
| #: nis/nis_error.c:35 |
| msgid "Unknown object" |
| msgstr "未知的目的檔" |
| |
| #: nis/nis_error.c:36 |
| msgid "Server busy, try again" |
| msgstr "伺服器忙碌中,請再試一次" |
| |
| #: nis/nis_error.c:37 |
| msgid "Generic system error" |
| msgstr "一般系統錯誤" |
| |
| #: nis/nis_error.c:38 |
| msgid "First/next chain broken" |
| msgstr "第一個/下一個序列壞掉了" |
| |
| #: nis/nis_error.c:41 |
| msgid "Name not served by this server" |
| msgstr "網域名稱服務不是由此伺服器提供" |
| |
| #: nis/nis_error.c:42 |
| msgid "Server out of memory" |
| msgstr "伺服器記憶體已用完" |
| |
| #: nis/nis_error.c:43 |
| msgid "Object with same name exists" |
| msgstr "同名的目標已經存在" |
| |
| #: nis/nis_error.c:44 |
| msgid "Not master server for this domain" |
| msgstr "並非此一領域的主伺服器" |
| |
| #: nis/nis_error.c:45 |
| msgid "Invalid object for operation" |
| msgstr "不適用的運作物件" |
| |
| #: nis/nis_error.c:46 |
| msgid "Malformed name, or illegal name" |
| msgstr "奇怪的名字,或不合法的名字" |
| |
| #: nis/nis_error.c:47 |
| msgid "Unable to create callback" |
| msgstr "無法建立回叫資料 (callback)" |
| |
| #: nis/nis_error.c:48 |
| msgid "Results sent to callback proc" |
| msgstr "結果傳送給回傳程序" |
| |
| #: nis/nis_error.c:49 |
| msgid "Not found, no such name" |
| msgstr "找不到,沒有此一名稱" |
| |
| #: nis/nis_error.c:50 |
| msgid "Name/entry isn't unique" |
| msgstr "名稱/項目不是唯一的" |
| |
| #: nis/nis_error.c:51 |
| msgid "Modification failed" |
| msgstr "修改失敗" |
| |
| #: nis/nis_error.c:52 |
| msgid "Database for table does not exist" |
| msgstr "表格的資料庫不存在" |
| |
| #: nis/nis_error.c:53 |
| msgid "Entry/table type mismatch" |
| msgstr "項目/表格形態不符" |
| |
| #: nis/nis_error.c:54 |
| msgid "Link points to illegal name" |
| msgstr "連結指向不合法的名稱" |
| |
| #: nis/nis_error.c:55 |
| msgid "Partial success" |
| msgstr "部份成功" |
| |
| #: nis/nis_error.c:56 |
| msgid "Too many attributes" |
| msgstr "太多的屬性" |
| |
| #: nis/nis_error.c:57 |
| msgid "Error in RPC subsystem" |
| msgstr "RPC 子系統錯誤" |
| |
| #: nis/nis_error.c:58 |
| msgid "Missing or malformed attribute" |
| msgstr "缺少或奇怪的屬性" |
| |
| #: nis/nis_error.c:59 |
| msgid "Named object is not searchable" |
| msgstr "有名稱的物件無法搜尋" |
| |
| #: nis/nis_error.c:60 |
| msgid "Error while talking to callback proc" |
| msgstr "在與 callback proc 通訊時錯誤" |
| |
| #: nis/nis_error.c:61 |
| msgid "Non NIS+ namespace encountered" |
| msgstr "遭遇違反 NIS+ 命名規則的名稱" |
| |
| #: nis/nis_error.c:62 |
| msgid "Illegal object type for operation" |
| msgstr "不合法的運作物件形態" |
| |
| #: nis/nis_error.c:63 |
| msgid "Passed object is not the same object on server" |
| msgstr "經過的物件與伺服器上的並不相同" |
| |
| #: nis/nis_error.c:64 |
| msgid "Modify operation failed" |
| msgstr "修改運作方式失敗" |
| |
| #: nis/nis_error.c:65 |
| msgid "Query illegal for named table" |
| msgstr "對記名表格的查詢並不合法" |
| |
| #: nis/nis_error.c:66 |
| msgid "Attempt to remove a non-empty table" |
| msgstr "嘗試刪除一個有內容的表格" |
| |
| #: nis/nis_error.c:67 |
| msgid "Error in accessing NIS+ cold start file. Is NIS+ installed?" |
| msgstr "存取 NIS+ 原始啟動檔錯誤。有安裝 NIS+ 嗎?" |
| |
| #: nis/nis_error.c:68 |
| msgid "Full resync required for directory" |
| msgstr "目錄的 resync 請求已滿" |
| |
| #: nis/nis_error.c:69 |
| msgid "NIS+ operation failed" |
| msgstr "NIS+ 運作失敗" |
| |
| #: nis/nis_error.c:70 |
| msgid "NIS+ service is unavailable or not installed" |
| msgstr "NIS+ 服務無法取得或者尚未安裝" |
| |
| #: nis/nis_error.c:71 |
| msgid "Yes, 42 is the meaning of life" |
| msgstr "是的,42 就是存在的意義" |
| |
| #: nis/nis_error.c:72 |
| msgid "Unable to authenticate NIS+ server" |
| msgstr "無法對 NIS+ 的伺服端進行認證" |
| |
| #: nis/nis_error.c:73 |
| msgid "Unable to authenticate NIS+ client" |
| msgstr "無法對 NIS+ 的請求端進行認證" |
| |
| #: nis/nis_error.c:74 |
| msgid "No file space on server" |
| msgstr "伺服器上沒有檔案空間" |
| |
| #: nis/nis_error.c:75 |
| msgid "Unable to create process on server" |
| msgstr "無法在伺服器上建立執行程序" |
| |
| #: nis/nis_error.c:76 |
| msgid "Master server busy, full dump rescheduled." |
| msgstr "主要伺服器忙碌中,重新進行完整資料傾卸排程。" |
| |
| #: nis/nis_local_names.c:126 |
| #, c-format |
| msgid "LOCAL entry for UID %d in directory %s not unique\n" |
| msgstr "UID 為 %d 的項目在本地端中並不是唯一的 (在 %s 目錄裡面)\n" |
| |
| #: nis/nis_print.c:51 |
| msgid "UNKNOWN" |
| msgstr "不明" |
| |
| #: nis/nis_print.c:109 |
| msgid "BOGUS OBJECT\n" |
| msgstr "假的物件\n" |
| |
| #: nis/nis_print.c:112 |
| msgid "NO OBJECT\n" |
| msgstr "沒有物件\n" |
| |
| #: nis/nis_print.c:115 |
| msgid "DIRECTORY\n" |
| msgstr "目錄\n" |
| |
| #: nis/nis_print.c:118 |
| msgid "GROUP\n" |
| msgstr "群組\n" |
| |
| #: nis/nis_print.c:121 |
| msgid "TABLE\n" |
| msgstr "表格\n" |
| |
| #: nis/nis_print.c:124 |
| msgid "ENTRY\n" |
| msgstr "項目\n" |
| |
| #: nis/nis_print.c:127 |
| msgid "LINK\n" |
| msgstr "連結\n" |
| |
| #: nis/nis_print.c:130 |
| msgid "PRIVATE\n" |
| msgstr "私有的\n" |
| |
| #: nis/nis_print.c:133 |
| msgid "(Unknown object)\n" |
| msgstr "(未知的物件)\n" |
| |
| #: nis/nis_print.c:166 |
| #, c-format |
| msgid "Name : `%s'\n" |
| msgstr "名稱 : `%s'\n" |
| |
| #: nis/nis_print.c:167 |
| #, c-format |
| msgid "Type : %s\n" |
| msgstr "格式 : %s\n" |
| |
| #: nis/nis_print.c:172 |
| msgid "Master Server :\n" |
| msgstr "主要伺服器 :\n" |
| |
| #: nis/nis_print.c:174 |
| msgid "Replicate :\n" |
| msgstr "複製 :\n" |
| |
| #: nis/nis_print.c:175 |
| #, c-format |
| msgid "\tName : %s\n" |
| msgstr "\t名稱 : %s\n" |
| |
| #: nis/nis_print.c:176 |
| msgid "\tPublic Key : " |
| msgstr "\t公共鑰匙 : " |
| |
| #: nis/nis_print.c:180 |
| msgid "None.\n" |
| msgstr "無\n" |
| |
| #: nis/nis_print.c:183 |
| #, c-format |
| msgid "Diffie-Hellmann (%d bits)\n" |
| msgstr "Diffie-Hellmann (%d 位元)\n" |
| |
| #: nis/nis_print.c:188 |
| #, c-format |
| msgid "RSA (%d bits)\n" |
| msgstr "RSA (%d 位元)\n" |
| |
| #: nis/nis_print.c:191 |
| msgid "Kerberos.\n" |
| msgstr "Kerberos.\n" |
| |
| #: nis/nis_print.c:194 |
| #, c-format |
| msgid "Unknown (type = %d, bits = %d)\n" |
| msgstr "未知的 (形態 = %d,位元 = %d)\n" |
| |
| #: nis/nis_print.c:205 |
| #, c-format |
| msgid "\tUniversal addresses (%u)\n" |
| msgstr "\t絕對位址 (%u)\n" |
| |
| #: nis/nis_print.c:227 |
| msgid "Time to live : " |
| msgstr "存在時間 : " |
| |
| #: nis/nis_print.c:229 |
| msgid "Default Access rights :\n" |
| msgstr "預設的存取權限 :\n" |
| |
| #: nis/nis_print.c:238 |
| #, c-format |
| msgid "\tType : %s\n" |
| msgstr "\t型別 : %s\n" |
| |
| #: nis/nis_print.c:239 |
| msgid "\tAccess rights: " |
| msgstr "\t存取權限: " |
| |
| #: nis/nis_print.c:252 |
| msgid "Group Flags :" |
| msgstr "群組旗標 :" |
| |
| #: nis/nis_print.c:255 |
| msgid "" |
| "\n" |
| "Group Members :\n" |
| msgstr "" |
| "\n" |
| "群組的成員 :\n" |
| |
| #: nis/nis_print.c:266 |
| #, c-format |
| msgid "Table Type : %s\n" |
| msgstr "表格形式 : %s\n" |
| |
| #: nis/nis_print.c:267 |
| #, c-format |
| msgid "Number of Columns : %d\n" |
| msgstr "欄位的數目 : %d\n" |
| |
| #: nis/nis_print.c:268 |
| #, c-format |
| msgid "Character Separator : %c\n" |
| msgstr "字元分隔號 : %c\n" |
| |
| #: nis/nis_print.c:269 |
| #, c-format |
| msgid "Search Path : %s\n" |
| msgstr "搜尋路徑 : %s\n" |
| |
| #: nis/nis_print.c:270 |
| msgid "Columns :\n" |
| msgstr "行 :\n" |
| |
| #: nis/nis_print.c:273 |
| #, c-format |
| msgid "\t[%d]\tName : %s\n" |
| msgstr "\t[%d]\t名稱 : %s\n" |
| |
| #: nis/nis_print.c:275 |
| msgid "\t\tAttributes : " |
| msgstr "\t\t屬性 : " |
| |
| #: nis/nis_print.c:277 |
| msgid "\t\tAccess Rights : " |
| msgstr "\t\t存取權限 : " |
| |
| #: nis/nis_print.c:286 |
| msgid "Linked Object Type : " |
| msgstr "連結的物件形態 : " |
| |
| #: nis/nis_print.c:288 |
| #, c-format |
| msgid "Linked to : %s\n" |
| msgstr "連結到 : %s\n" |
| |
| #: nis/nis_print.c:297 |
| #, c-format |
| msgid "\tEntry data of type %s\n" |
| msgstr "\t型別為 %s 的項目資料\n" |
| |
| #: nis/nis_print.c:300 |
| #, c-format |
| msgid "\t[%u] - [%u bytes] " |
| msgstr "\t[%u] - [%u 位元組] " |
| |
| #: nis/nis_print.c:303 |
| msgid "Encrypted data\n" |
| msgstr "編碼資料\n" |
| |
| #: nis/nis_print.c:305 |
| msgid "Binary data\n" |
| msgstr "二進位資料\n" |
| |
| #: nis/nis_print.c:320 |
| #, c-format |
| msgid "Object Name : %s\n" |
| msgstr "物件名稱 : %s\n" |
| |
| #: nis/nis_print.c:321 |
| #, c-format |
| msgid "Directory : %s\n" |
| msgstr "目錄 : %s\n" |
| |
| #: nis/nis_print.c:322 |
| #, c-format |
| msgid "Owner : %s\n" |
| msgstr "擁有者 : %s\n" |
| |
| #: nis/nis_print.c:323 |
| #, c-format |
| msgid "Group : %s\n" |
| msgstr "群組 : %s\n" |
| |
| #: nis/nis_print.c:324 |
| msgid "Access Rights : " |
| msgstr "存取權限 : " |
| |
| #: nis/nis_print.c:326 |
| #, c-format |
| msgid "" |
| "\n" |
| "Time to Live : " |
| msgstr "" |
| "\n" |
| "存在的時間 : " |
| |
| #: nis/nis_print.c:329 |
| #, c-format |
| msgid "Creation Time : %s" |
| msgstr "產生時間 : %s" |
| |
| #: nis/nis_print.c:331 |
| #, c-format |
| msgid "Mod. Time : %s" |
| msgstr "修改時間 : %s" |
| |
| #: nis/nis_print.c:332 |
| msgid "Object Type : " |
| msgstr "物件型別 : " |
| |
| #: nis/nis_print.c:352 |
| #, c-format |
| msgid " Data Length = %u\n" |
| msgstr " 資料長度 = %u\n" |
| |
| #: nis/nis_print.c:365 |
| #, c-format |
| msgid "Status : %s\n" |
| msgstr "狀態 : %s\n" |
| |
| #: nis/nis_print.c:366 |
| #, c-format |
| msgid "Number of objects : %u\n" |
| msgstr "物件的數目 : %u\n" |
| |
| #: nis/nis_print.c:370 |
| #, c-format |
| msgid "Object #%d:\n" |
| msgstr "目的檔 #%d:\n" |
| |
| #: nis/nis_print_group_entry.c:115 |
| #, c-format |
| msgid "Group entry for \"%s.%s\" group:\n" |
| msgstr "群組 \"%s.%s\" 群組項目:\n" |
| |
| #: nis/nis_print_group_entry.c:123 |
| msgid " Explicit members:\n" |
| msgstr " 明確的成員:\n" |
| |
| #: nis/nis_print_group_entry.c:128 |
| msgid " No explicit members\n" |
| msgstr " 沒有明確的成員\n" |
| |
| #: nis/nis_print_group_entry.c:131 |
| msgid " Implicit members:\n" |
| msgstr " 不明確的成員:\n" |
| |
| #: nis/nis_print_group_entry.c:136 |
| msgid " No implicit members\n" |
| msgstr " 沒有不明確的成員\n" |
| |
| #: nis/nis_print_group_entry.c:139 |
| msgid " Recursive members:\n" |
| msgstr " 遞迴的成員:\n" |
| |
| #: nis/nis_print_group_entry.c:144 |
| msgid " No recursive members\n" |
| msgstr " 沒有遞迴的成員\n" |
| |
| #: nis/nis_print_group_entry.c:147 nis/nis_print_group_entry.c:163 |
| msgid " Explicit nonmembers:\n" |
| msgstr " 明確的非成員:\n" |
| |
| #: nis/nis_print_group_entry.c:152 |
| msgid " No explicit nonmembers\n" |
| msgstr " 沒有明確的非成員\n" |
| |
| #: nis/nis_print_group_entry.c:155 |
| msgid " Implicit nonmembers:\n" |
| msgstr " 不明確的非成員:\n" |
| |
| #: nis/nis_print_group_entry.c:160 |
| msgid " No implicit nonmembers\n" |
| msgstr " 沒有不明確的非成員\n" |
| |
| #: nis/nis_print_group_entry.c:168 |
| msgid " No recursive nonmembers\n" |
| msgstr " 沒有遞迴的非成員\n" |
| |
| #: nis/nss_nisplus/nisplus-publickey.c:101 |
| #: nis/nss_nisplus/nisplus-publickey.c:182 |
| #, c-format |
| msgid "DES entry for netname %s not unique\n" |
| msgstr "netname %s 的 DES 項目並不唯一\n" |
| |
| #: nis/nss_nisplus/nisplus-publickey.c:218 |
| #, c-format |
| msgid "netname2user: missing group id list in `%s'." |
| msgstr "netname2user: `%s' 中缺少群組 id 列表。" |
| |
| #: nis/nss_nisplus/nisplus-publickey.c:300 |
| #: nis/nss_nisplus/nisplus-publickey.c:306 |
| #: nis/nss_nisplus/nisplus-publickey.c:370 |
| #: nis/nss_nisplus/nisplus-publickey.c:379 |
| #, c-format |
| msgid "netname2user: (nis+ lookup): %s\n" |
| msgstr "netname2user: (nis+ 搜尋): %s\n" |
| |
| #: nis/nss_nisplus/nisplus-publickey.c:319 |
| #, c-format |
| msgid "netname2user: DES entry for %s in directory %s not unique" |
| msgstr "netname2user: %s 的 DES 項目在 %s 目錄下並不是唯一的" |
| |
| #: nis/nss_nisplus/nisplus-publickey.c:337 |
| #, c-format |
| msgid "netname2user: principal name `%s' too long" |
| msgstr "netname2user: 主要名稱 `%s' 太長了" |
| |
| #: nis/nss_nisplus/nisplus-publickey.c:392 |
| #, c-format |
| msgid "netname2user: LOCAL entry for %s in directory %s not unique" |
| msgstr "netname2user: %s 的本地端項目在 %s 目錄下並不是唯一的" |
| |
| #: nis/nss_nisplus/nisplus-publickey.c:399 |
| msgid "netname2user: should not have uid 0" |
| msgstr "netname2user: 不能有使用者 id 為 0 的情況" |
| |
| #: nis/ypclnt.c:171 |
| #, c-format |
| msgid "YPBINDPROC_DOMAIN: %s\n" |
| msgstr "YPBINDPROC_DOMAIN: %s\n" |
| |
| #: nis/ypclnt.c:780 |
| msgid "Request arguments bad" |
| msgstr "必須引數有錯誤" |
| |
| #: nis/ypclnt.c:782 |
| msgid "RPC failure on NIS operation" |
| msgstr "NIS 運作 RPC 失敗" |
| |
| #: nis/ypclnt.c:784 |
| msgid "Can't bind to server which serves this domain" |
| msgstr "無法與服務於此網域的伺服器聯繫" |
| |
| #: nis/ypclnt.c:786 |
| msgid "No such map in server's domain" |
| msgstr "在伺服器的領域資料中找不到此一對映表" |
| |
| #: nis/ypclnt.c:788 |
| msgid "No such key in map" |
| msgstr "在對映表中沒有此一鍵值" |
| |
| #: nis/ypclnt.c:790 |
| msgid "Internal NIS error" |
| msgstr "內部 NIS 錯誤" |
| |
| #: nis/ypclnt.c:792 |
| msgid "Local resource allocation failure" |
| msgstr "區域資源配置失敗" |
| |
| #: nis/ypclnt.c:794 |
| msgid "No more records in map database" |
| msgstr "在對映表資料庫中沒有其他紀錄了" |
| |
| #: nis/ypclnt.c:796 |
| msgid "Can't communicate with portmapper" |
| msgstr "無法與 portmapper 通訊" |
| |
| #: nis/ypclnt.c:798 |
| msgid "Can't communicate with ypbind" |
| msgstr "無法與 ypbind 通訊" |
| |
| #: nis/ypclnt.c:800 |
| msgid "Can't communicate with ypserv" |
| msgstr "無法與 ypserv 通訊" |
| |
| #: nis/ypclnt.c:802 |
| msgid "Local domain name not set" |
| msgstr "區域網域名稱沒有設定" |
| |
| #: nis/ypclnt.c:804 |
| msgid "NIS map database is bad" |
| msgstr "NIS 對映資料庫是壞的" |
| |
| #: nis/ypclnt.c:806 |
| msgid "NIS client/server version mismatch - can't supply service" |
| msgstr "NIS 請求端/伺服端版本不符合 - 無法提供服務" |
| |
| #: nis/ypclnt.c:810 |
| msgid "Database is busy" |
| msgstr "資料庫正在忙碌" |
| |
| #: nis/ypclnt.c:812 |
| msgid "Unknown NIS error code" |
| msgstr "未知的 NIS 錯誤碼" |
| |
| #: nis/ypclnt.c:854 |
| msgid "Internal ypbind error" |
| msgstr "內部 ypbind 錯誤" |
| |
| #: nis/ypclnt.c:856 |
| msgid "Domain not bound" |
| msgstr "網域找不到" |
| |
| #: nis/ypclnt.c:858 |
| msgid "System resource allocation failure" |
| msgstr "系統資源配置失敗" |
| |
| #: nis/ypclnt.c:860 |
| msgid "Unknown ypbind error" |
| msgstr "未知的 ypbind 錯誤" |
| |
| #: nis/ypclnt.c:899 |
| msgid "yp_update: cannot convert host to netname\n" |
| msgstr "yp_update: 無法轉換主機的網路名稱\n" |
| |
| #: nis/ypclnt.c:911 |
| msgid "yp_update: cannot get server address\n" |
| msgstr "yp_update: 無法取得伺服器位址\n" |
| |
| #: nscd/cache.c:94 |
| msgid "while allocating hash table entry" |
| msgstr "在配置 hash 表格項目時" |
| |
| #: nscd/cache.c:162 nscd/connections.c:184 |
| #, c-format |
| msgid "cannot stat() file `%s': %s" |
| msgstr "無法 stat() 檔案 `%s': %s" |
| |
| #: nscd/connections.c:150 |
| msgid "Cannot run nscd in secure mode as unprivileged user" |
| msgstr "無法以未獲授權的使用者身分在安全模式中執行 nscd" |
| |
| #: nscd/connections.c:172 |
| #, c-format |
| msgid "while allocating cache: %s" |
| msgstr "當配置快取項目: %s" |
| |
| #: nscd/connections.c:197 |
| #, c-format |
| msgid "cannot open socket: %s" |
| msgstr "無法開啟 socket: %s" |
| |
| #: nscd/connections.c:215 |
| #, c-format |
| msgid "cannot enable socket to accept connections: %s" |
| msgstr "無法開啟 socket 來接受連線: %s" |
| |
| #: nscd/connections.c:260 |
| #, c-format |
| msgid "cannot handle old request version %d; current version is %d" |
| msgstr "不能處理舊 %d 版的請求;目前使用的版本是 %d" |
| |
| #: nscd/connections.c:298 nscd/connections.c:324 |
| #, c-format |
| msgid "cannot write result: %s" |
| msgstr "無法寫入結果: %s" |
| |
| #: nscd/connections.c:392 nscd/connections.c:514 |
| #, c-format |
| msgid "error getting caller's id: %s" |
| msgstr "取得呼叫程式識別碼時發生錯誤: %s" |
| |
| #: nscd/connections.c:485 |
| #, c-format |
| msgid "while accepting connection: %s" |
| msgstr "在接受連線時: %s" |
| |
| #: nscd/connections.c:498 |
| #, c-format |
| msgid "short read while reading request: %s" |
| msgstr "讀取請求時發現輸入值過短: %s" |
| |
| #: nscd/connections.c:542 |
| #, c-format |
| msgid "key length in request too long: %d" |
| msgstr "在此請求中使用的鍵值太長了: %d" |
| |
| #: nscd/connections.c:556 |
| #, c-format |
| msgid "short read while reading request key: %s" |
| msgstr "讀取請求的鍵值時發現輸入值過短: %s" |
| |
| #: nscd/connections.c:566 |
| #, c-format |
| msgid "handle_request: request received (Version = %d) from PID %ld" |
| msgstr "handle_request: 請求已被接受 (版本為 %d) 來自於 PID %ld" |
| |
| #: nscd/connections.c:571 |
| #, c-format |
| msgid "handle_request: request received (Version = %d)" |
| msgstr "handle_request: 請求已被接受 (版本為 %d)" |
| |
| #: nscd/connections.c:635 nscd/connections.c:636 nscd/connections.c:655 |
| #: nscd/connections.c:668 nscd/connections.c:674 nscd/connections.c:681 |
| #, c-format |
| msgid "Failed to run nscd as user '%s'" |
| msgstr "以使用者 '%s' 的身分執行 nscd 失敗" |
| |
| #: nscd/connections.c:656 |
| msgid "getgrouplist failed" |
| msgstr "getgrouplist 失敗" |
| |
| #: nscd/connections.c:669 |
| msgid "setgroups failed" |
| msgstr "setgroups 失敗" |
| |
| #: nscd/grpcache.c:103 nscd/hstcache.c:111 nscd/pwdcache.c:109 |
| msgid "while allocating key copy" |
| msgstr "在配置鍵值副本時" |
| |
| #: nscd/grpcache.c:153 nscd/hstcache.c:168 nscd/pwdcache.c:146 |
| msgid "while allocating cache entry" |
| msgstr "在配置快取項目時" |
| |
| #: nscd/grpcache.c:197 nscd/hstcache.c:283 nscd/pwdcache.c:193 |
| #, c-format |
| msgid "short write in %s: %s" |
| msgstr "寫入 %s 的資料過短: %s" |
| |
| #: nscd/grpcache.c:219 |
| #, c-format |
| msgid "Haven't found \"%s\" in group cache!" |
| msgstr "尚未在群組快取中找到 \"%s\"!" |
| |
| #: nscd/grpcache.c:285 |
| #, c-format |
| msgid "Invalid numeric gid \"%s\"!" |
| msgstr "無效的 gid 數值 \"%s\"!" |
| |
| #: nscd/grpcache.c:292 |
| #, c-format |
| msgid "Haven't found \"%d\" in group cache!" |
| msgstr "尚未在群組快取中找到 \"%d\"!" |
| |
| #: nscd/hstcache.c:305 nscd/hstcache.c:371 nscd/hstcache.c:436 |
| #: nscd/hstcache.c:501 |
| #, c-format |
| msgid "Haven't found \"%s\" in hosts cache!" |
| msgstr "尚未在 hosts 快取中找到 \"%s\"!" |
| |
| #: nscd/nscd.c:89 |
| msgid "Read configuration data from NAME" |
| msgstr "自名稱中讀取設定資料" |
| |
| #: nscd/nscd.c:91 |
| msgid "Do not fork and display messages on the current tty" |
| msgstr "不在目前的 tty 產生子行程 (fork) 以及顯示訊息" |
| |
| #: nscd/nscd.c:92 |
| msgid "NUMBER" |
| msgstr "號碼" |
| |
| #: nscd/nscd.c:92 |
| msgid "Start NUMBER threads" |
| msgstr "啟動執行緒" |
| |
| #: nscd/nscd.c:93 |
| msgid "Shut the server down" |
| msgstr "將伺服器關閉" |
| |
| #: nscd/nscd.c:94 |
| msgid "Print current configuration statistic" |
| msgstr "印出目前的組態統計" |
| |
| #: nscd/nscd.c:95 |
| msgid "TABLE" |
| msgstr "表格" |
| |
| #: nscd/nscd.c:96 |
| msgid "Invalidate the specified cache" |
| msgstr "使選定的快取無效" |
| |
| #: nscd/nscd.c:97 |
| msgid "TABLE,yes" |
| msgstr "要製作表格" |
| |
| #: nscd/nscd.c:97 |
| msgid "Use separate cache for each user" |
| msgstr "對不同使用者使用不同的快取檔案" |
| |
| #: nscd/nscd.c:102 |
| msgid "Name Service Cache Daemon." |
| msgstr "網域名稱快取精靈" |
| |
| #: nscd/nscd.c:141 |
| msgid "cannot read configuration file; this is fatal" |
| msgstr "無法讀取設定檔,這是一個嚴重錯誤" |
| |
| #: nscd/nscd.c:152 |
| msgid "already running" |
| msgstr "已在執行" |
| |
| #: nscd/nscd.c:270 nscd/nscd.c:294 nscd/nscd_stat.c:132 |
| msgid "Only root is allowed to use this option!" |
| msgstr "只有 root 才可以使用此一選項!" |
| |
| #: nscd/nscd_conf.c:88 |
| #, c-format |
| msgid "Parse error: %s" |
| msgstr "解析錯誤: %s" |
| |
| #: nscd/nscd_conf.c:171 |
| #, c-format |
| msgid "Could not create log file \"%s\"" |
| msgstr "無法產生訊息檔 \"%s\"" |
| |
| #: nscd/nscd_conf.c:187 |
| msgid "Must specify user name for server-user option" |
| msgstr "必須為伺服器使用者選項指定使用者名稱" |
| |
| #: nscd/nscd_conf.c:194 |
| msgid "Must specify user name for stat-user option" |
| msgstr "必須為 stat 使用者選項指定使用者名稱" |
| |
| #: nscd/nscd_conf.c:205 |
| #, c-format |
| msgid "Unknown option: %s %s %s" |
| msgstr "未知的選項: %s %s %s" |
| |
| #: nscd/nscd_stat.c:103 |
| #, c-format |
| msgid "cannot write statistics: %s" |
| msgstr "無法寫入統計資料: %s" |
| |
| #: nscd/nscd_stat.c:128 |
| #, c-format |
| msgid "Only root or %s is allowed to use this option!" |
| msgstr "只有 root 或 %s 才允許使用此一選項!" |
| |
| #: nscd/nscd_stat.c:139 |
| msgid "nscd not running!\n" |
| msgstr "nscd 並沒有在執行!\n" |
| |
| #: nscd/nscd_stat.c:150 |
| msgid "write incomplete" |
| msgstr "寫入不完全" |
| |
| #: nscd/nscd_stat.c:162 |
| msgid "cannot read statistics data" |
| msgstr "無法讀取統計資料" |
| |
| #: nscd/nscd_stat.c:165 |
| #, c-format |
| msgid "" |
| "nscd configuration:\n" |
| "\n" |
| "%15d server debug level\n" |
| msgstr "" |
| "nscd 設定:\n" |
| "\n" |
| "%15d 伺服程式錯誤訊息報告等級\n" |
| |
| #: nscd/nscd_stat.c:189 |
| #, c-format |
| msgid "%3ud %2uh %2um %2lus server runtime\n" |
| msgstr "%3ud %2uh %2um %2lus 伺服器 執行時期\n" |
| |
| #: nscd/nscd_stat.c:192 |
| #, c-format |
| msgid " %2uh %2um %2lus server runtime\n" |
| msgstr " %2uh %2um %2lus 伺服器 執行時期\n" |
| |
| #: nscd/nscd_stat.c:194 |
| #, c-format |
| msgid " %2um %2lus server runtime\n" |
| msgstr " %2um %2lus 伺服器 執行時期\n" |
| |
| #: nscd/nscd_stat.c:196 |
| #, c-format |
| msgid " %2lus server runtime\n" |
| msgstr " %2lus 伺服器 執行時期\n" |
| |
| #: nscd/nscd_stat.c:198 |
| #, c-format |
| msgid "%15lu number of times clients had to wait\n" |
| msgstr "%15lu 次數 須等待客戶端\n" |
| |
| #: nscd/nscd_stat.c:213 nscd/nscd_stat.c:215 |
| msgid " no" |
| msgstr " 不" |
| |
| #: nscd/nscd_stat.c:213 nscd/nscd_stat.c:215 |
| msgid " yes" |
| msgstr " 是" |
| |
| #: nscd/nscd_stat.c:221 |
| #, c-format |
| msgid "" |
| "\n" |
| "%s cache:\n" |
| "\n" |
| "%15s cache is enabled\n" |
| "%15Zu suggested size\n" |
| "%15lu seconds time to live for positive entries\n" |
| "%15lu seconds time to live for negative entries\n" |
| "%15lu cache hits on positive entries\n" |
| "%15lu cache hits on negative entries\n" |
| "%15lu cache misses on positive entries\n" |
| "%15lu cache misses on negative entries\n" |
| "%15lu%% cache hit rate\n" |
| "%15lu current number of cached values\n" |
| "%15lu maximum number of cached values\n" |
| "%15lu maximum chain length searched\n" |
| "%15lu number of delays on rdlock\n" |
| "%15lu number of delays on wrlock\n" |
| "%15s check /etc/%s for changes\n" |
| msgstr "" |
| "\n" |
| "%s 快取:\n" |
| "\n" |
| "%15s 快取已開啟\n" |
| "%15Zu 希望的大小\n" |
| "%15lu 正項目的存在時間 (秒)\n" |
| "%15lu 負項目的存在時間 (秒)\n" |
| "%15lu 正項目中找到快取數\n" |
| "%15lu 負項目中找到快取數\n" |
| "%15lu 正項目中遺漏的快取數\n" |
| "%15lu 負項目中遺漏的快取數\n" |
| "%15lu%% 快取找到的比例\n" |
| "%15lu 目前已快取數值量\n" |
| "%15lu 最大快取數值量\n" |
| "%15lu 最大已搜尋的鏈結長度\n" |
| "%15lu 在 rdlock 上的延遲數量\n" |
| "%15lu 在 wrlock 上的延遲數量\n" |
| "%15s 檢查 /etc/%s 的改變\n" |
| |
| #: nscd/pwdcache.c:215 |
| #, c-format |
| msgid "Haven't found \"%s\" in password cache!" |
| msgstr "尚未在密碼快取中找到 \"%s\"!" |
| |
| #: nscd/pwdcache.c:281 |
| #, c-format |
| msgid "Invalid numeric uid \"%s\"!" |
| msgstr "無效的 uid 數值 \"%s\"!" |
| |
| #: nscd/pwdcache.c:288 |
| #, c-format |
| msgid "Haven't found \"%d\" in password cache!" |
| msgstr "尚未在密碼快取中找到 \"%d\"!" |
| |
| #: elf/../sysdeps/generic/dl-sysdep.c:422 |
| msgid "cannot create capability list" |
| msgstr "無法建立 capability 列表" |
| |
| #: elf/../sysdeps/generic/readelflib.c:35 |
| #, c-format |
| msgid "file %s is truncated\n" |
| msgstr "檔案 %s 已截短\n" |
| |
| #: elf/../sysdeps/generic/readelflib.c:67 |
| #, c-format |
| msgid "%s is a 32 bit ELF file.\n" |
| msgstr "%s 是一個 32 位元的 ELF 檔案。\n" |
| |
| #: elf/../sysdeps/generic/readelflib.c:69 |
| #, c-format |
| msgid "%s is a 64 bit ELF file.\n" |
| msgstr "%s 是一個 64 位元的 ELF 檔案。\n" |
| |
| #: elf/../sysdeps/generic/readelflib.c:71 |
| #, c-format |
| msgid "Unknown ELFCLASS in file %s.\n" |
| msgstr "檔案 %s 中未知的 ELFCLASS。\n" |
| |
| #: elf/../sysdeps/generic/readelflib.c:78 |
| #, c-format |
| msgid "%s is not a shared object file (Type: %d).\n" |
| msgstr "%s 不是一個共用目的檔 (型態: %d)。\n" |
| |
| #: elf/../sysdeps/generic/readelflib.c:109 |
| msgid "more than one dynamic segment\n" |
| msgstr "超過一個的動態區段\n" |
| |
| #: elf/../sysdeps/unix/sysv/linux/i386/readelflib.c:49 |
| #, c-format |
| msgid "%s is for unknown machine %d.\n" |
| msgstr "%s 是給未知的機器 %d。\n" |
| |
| #: elf/cache.c:70 |
| msgid "unknown" |
| msgstr "未知" |
| |
| #: elf/cache.c:111 |
| msgid "Unknown OS" |
| msgstr "未知的作業系統" |
| |
| #: elf/cache.c:116 |
| #, c-format |
| msgid ", OS ABI: %s %d.%d.%d" |
| msgstr ", OS ABI: %s %d.%d.%d" |
| |
| #: elf/cache.c:142 elf/ldconfig.c:1078 |
| #, c-format |
| msgid "Can't open cache file %s\n" |
| msgstr "無法開啟快取檔 %s\n" |
| |
| #: elf/cache.c:154 |
| msgid "mmap of cache file failed.\n" |
| msgstr "快取檔案 mmap 失敗。\n" |
| |
| #: elf/cache.c:158 elf/cache.c:168 |
| msgid "File is not a cache file.\n" |
| msgstr "檔案並非快取檔。\n" |
| |
| #: elf/cache.c:201 elf/cache.c:211 |
| #, c-format |
| msgid "%d libs found in cache `%s'\n" |
| msgstr "%d 函式庫在快取 `%s' 中找到\n" |
| |
| #: elf/cache.c:410 |
| #, c-format |
| msgid "Can't remove old temporary cache file %s" |
| msgstr "無法刪除舊的暫時快取檔 %s" |
| |
| #: elf/cache.c:417 |
| #, c-format |
| msgid "Can't create temporary cache file %s" |
| msgstr "無法產生暫時的快取檔 %s" |
| |
| #: elf/cache.c:425 elf/cache.c:434 elf/cache.c:438 |
| msgid "Writing of cache data failed" |
| msgstr "寫入快取資料時發生錯誤" |
| |
| #: elf/cache.c:442 |
| msgid "Writing of cache data failed." |
| msgstr "寫入快取資料時發生錯誤" |
| |
| #: elf/cache.c:449 |
| #, c-format |
| msgid "Changing access rights of %s to %#o failed" |
| msgstr "更改 %s 的存取權限為 %#o 失敗" |
| |
| #: elf/cache.c:454 |
| #, c-format |
| msgid "Renaming of %s to %s failed" |
| msgstr "將 %s 改名為 %s 失敗" |
| |
| #: elf/dl-close.c:128 |
| msgid "shared object not open" |
| msgstr "共用目的檔案沒有開啟" |
| |
| #: elf/dl-close.c:531 elf/dl-open.c:454 |
| msgid "TLS generation counter wrapped! Please send report with the 'glibcbug' script." |
| msgstr "TLS 產生計數器已被轉包! 請寄出以 'glibcbug' 命令稿所做的報告。" |
| |
| #: elf/dl-deps.c:111 elf/dl-open.c:183 |
| msgid "DST not allowed in SUID/SGID programs" |
| msgstr "DST 不允許在 SUID/SGID 的程式中" |
| |
| #: elf/dl-deps.c:124 |
| msgid "empty dynamics string token substitution" |
| msgstr "空的動態字串記號替換" |
| |
| #: elf/dl-deps.c:130 |
| #, c-format |
| msgid "cannot load auxiliary `%s' because of empty dynamic string token substitution\n" |
| msgstr "由於空的動態字串記號替換而無法載入外部的 `%s'\n" |
| |
| #: elf/dl-deps.c:461 |
| msgid "cannot allocate dependency list" |
| msgstr "無法配置相關性列表" |
| |
| #: elf/dl-deps.c:494 elf/dl-deps.c:549 |
| msgid "cannot allocate symbol search list" |
| msgstr "無法配置符號搜尋列表" |
| |
| #: elf/dl-deps.c:534 |
| msgid "Filters not supported with LD_TRACE_PRELINKING" |
| msgstr "過濾程式不支援與 LD_TRACE_PRELINKING 共用" |
| |
| #: elf/dl-error.c:75 |
| msgid "DYNAMIC LINKER BUG!!!" |
| msgstr "動態連接程式有問題!!!" |
| |
| #: elf/dl-error.c:108 |
| msgid "error while loading shared libraries" |
| msgstr "正在載入共用函式庫時發生錯誤" |
| |
| #: elf/dl-load.c:347 |
| msgid "cannot allocate name record" |
| msgstr "無法配置名稱紀錄" |
| |
| #: elf/dl-load.c:449 elf/dl-load.c:528 elf/dl-load.c:648 elf/dl-load.c:743 |
| msgid "cannot create cache for search path" |
| msgstr "無法為搜尋路徑建立快取" |
| |
| #: elf/dl-load.c:551 |
| msgid "cannot create RUNPATH/RPATH copy" |
| msgstr "無法建立 RUNPATH/RPATH 的副本" |
| |
| #: elf/dl-load.c:634 |
| msgid "cannot create search path array" |
| msgstr "無法建立搜尋路徑陣列" |
| |
| #: elf/dl-load.c:830 |
| msgid "cannot stat shared object" |
| msgstr "無法 stat 共用目的檔" |
| |
| #: elf/dl-load.c:874 |
| msgid "cannot open zero fill device" |
| msgstr "無法開啟以零填滿的裝置" |
| |
| #: elf/dl-load.c:883 elf/dl-load.c:1929 |
| msgid "cannot create shared object descriptor" |
| msgstr "無法建立共用目的檔敘述項" |
| |
| #: elf/dl-load.c:902 elf/dl-load.c:1470 elf/dl-load.c:1553 |
| msgid "cannot read file data" |
| msgstr "無法讀取檔案資料" |
| |
| #: elf/dl-load.c:946 |
| msgid "ELF load command alignment not page-aligned" |
| msgstr "ELF 載入命令對齊並沒有按照記憶體分頁 (page) 對齊" |
| |
| #: elf/dl-load.c:953 |
| msgid "ELF load command address/offset not properly aligned" |
| msgstr "ELF 載入命令位址/位移並沒有適當地對齊" |
| |
| #: elf/dl-load.c:1037 |
| msgid "cannot allocate TLS data structures for initial thread" |
| msgstr "無法配置 TLS 資料結構用以起始執行緒" |
| |
| #: elf/dl-load.c:1061 |
| msgid "cannot handle TLS data" |
| msgstr "無法處理 TLS 資料" |
| |
| #: elf/dl-load.c:1075 |
| msgid "object file has no loadable segments" |
| msgstr "目的檔中沒有可載入的節區" |
| |
| #: elf/dl-load.c:1110 |
| msgid "failed to map segment from shared object" |
| msgstr "從共用目的檔中對映區段失敗" |
| |
| #: elf/dl-load.c:1135 |
| msgid "cannot dynamically load executable" |
| msgstr "無法動態載入執行檔" |
| |
| #: elf/dl-load.c:1191 |
| msgid "cannot change memory protections" |
| msgstr "無法改變記憶體保護狀態" |
| |
| #: elf/dl-load.c:1210 |
| msgid "cannot map zero-fill pages" |
| msgstr "無法對應以零填滿的分頁區" |
| |
| #: elf/dl-load.c:1228 |
| msgid "cannot allocate memory for program header" |
| msgstr "無法配置記憶體給程式標頭區使用" |
| |
| #: elf/dl-load.c:1259 |
| msgid "object file has no dynamic section" |
| msgstr "共用目的檔中沒有動態節區" |
| |
| #: elf/dl-load.c:1299 |
| msgid "shared object cannot be dlopen()ed" |
| msgstr "共用目的檔無法被 dlopen()" |
| |
| #: elf/dl-load.c:1322 |
| msgid "cannot create searchlist" |
| msgstr "無法建立搜尋列表" |
| |
| #: elf/dl-load.c:1352 |
| msgid "cannot enable executable stack as shared object requires" |
| msgstr "無法開啟可執行堆疊做為共用目的檔" |
| |
| #: elf/dl-load.c:1470 |
| msgid "file too short" |
| msgstr "檔案太小" |
| |
| #: elf/dl-load.c:1493 |
| msgid "invalid ELF header" |
| msgstr "無效的 ELF 標頭" |
| |
| #: elf/dl-load.c:1502 |
| msgid "ELF file data encoding not big-endian" |
| msgstr "ELF 檔資料編碼並非大尾序" |
| |
| #: elf/dl-load.c:1504 |
| msgid "ELF file data encoding not little-endian" |
| msgstr "ELF 檔資料編碼並非小尾序" |
| |
| #: elf/dl-load.c:1508 |
| msgid "ELF file version ident does not match current one" |
| msgstr "ELF 檔版本 ident 不符合目前所使用的" |
| |
| #: elf/dl-load.c:1512 |
| msgid "ELF file OS ABI invalid" |
| msgstr "ELF 檔 OS ABI 版本不適用" |
| |
| #: elf/dl-load.c:1514 |
| msgid "ELF file ABI version invalid" |
| msgstr "ELF 檔 ABI 版本不適用" |
| |
| #: elf/dl-load.c:1517 |
| msgid "internal error" |
| msgstr "內部錯誤" |
| |
| #: elf/dl-load.c:1524 |
| msgid "ELF file version does not match current one" |
| msgstr "ELF 檔版本不符合目前的版本" |
| |
| #: elf/dl-load.c:1532 |
| msgid "ELF file's phentsize not the expected size" |
| msgstr "ELF 檔的 phentsize 並不是預期中的大小" |
| |
| #: elf/dl-load.c:1538 |
| msgid "only ET_DYN and ET_EXEC can be loaded" |
| msgstr "只有 ET_DYN 以及 ET_EXEC 可以載入" |
| |
| #: elf/dl-load.c:1944 |
| msgid "cannot open shared object file" |
| msgstr "無法開啟共用目的檔" |
| |
| #: elf/dl-lookup.c:265 elf/dl-lookup.c:443 |
| msgid "relocation error" |
| msgstr "重定址錯誤" |
| |
| #: elf/dl-open.c:111 |
| msgid "cannot extend global scope" |
| msgstr "無法延展全域變數的作用域" |
| |
| #: elf/dl-open.c:214 |
| msgid "empty dynamic string token substitution" |
| msgstr "空的動態字串記號替換" |
| |
| #: elf/dl-open.c:361 elf/dl-open.c:372 |
| msgid "cannot create scope list" |
| msgstr "無法建立作用域列表" |
| |
| #: elf/dl-open.c:434 |
| msgid "cannot create TLS data structures" |
| msgstr "無法建立 TLS 資料結構" |
| |
| #: elf/dl-open.c:496 |
| msgid "invalid mode for dlopen()" |
| msgstr "無效的 dlopen() 模式" |
| |
| #: elf/dl-reloc.c:57 |
| msgid "cannot allocate memory in static TLS block" |
| msgstr "無法在靜態 TLS 區塊中配置記憶體" |
| |
| #: elf/dl-reloc.c:176 |
| msgid "cannot make segment writable for relocation" |
| msgstr "在重新定址以後無法將區段設為可寫入狀態" |
| |
| #: elf/dl-reloc.c:277 |
| #, c-format |
| msgid "%s: profiler found no PLTREL in object %s\n" |
| msgstr "%s: 描述程式在目的檔 %s 中沒有找到 PLTREL\n" |
| |
| #: elf/dl-reloc.c:289 |
| #, c-format |
| msgid "%s: profiler out of memory shadowing PLTREL of %s\n" |
| msgstr "%s: 描述程式遮蔽 %s 的 PLTREL 時記憶體不足\n" |
| |
| #: elf/dl-reloc.c:304 |
| msgid "cannot restore segment prot after reloc" |
| msgstr "在 reloc 之後無法復原 segment prot" |
| |
| #: elf/dl-sym.c:74 elf/dl-sym.c:145 |
| msgid "RTLD_NEXT used in code not dynamically loaded" |
| msgstr "程式碼所使用的 RTLD_NEXT 沒有動態載入" |
| |
| #: elf/dl-version.c:303 |
| msgid "cannot allocate version reference table" |
| msgstr "無法配置版本參照表" |
| |
| #: elf/ldconfig.c:122 |
| msgid "Print cache" |
| msgstr "列印快取" |
| |
| #: elf/ldconfig.c:123 |
| msgid "Generate verbose messages" |
| msgstr "產生更多的訊息" |
| |
| #: elf/ldconfig.c:124 |
| msgid "Don't build cache" |
| msgstr "不建立快取" |
| |
| #: elf/ldconfig.c:125 |
| msgid "Don't generate links" |
| msgstr "不產生連結" |
| |
| #: elf/ldconfig.c:126 |
| msgid "Change to and use ROOT as root directory" |
| msgstr "變換到 ROOT 目錄並以它做為根目錄" |
| |
| #: elf/ldconfig.c:127 |
| msgid "Use CACHE as cache file" |
| msgstr "使用 CACHE 當作快取檔案" |
| |
| #: elf/ldconfig.c:128 |
| msgid "Use CONF as configuration file" |
| msgstr "使用 CONF 當作設定檔" |
| |
| #: elf/ldconfig.c:129 |
| msgid "Only process directories specified on the command line. Don't build cache." |
| msgstr "只處理在命令列引數中有指定的目錄,不建立快取檔案。" |
| |
| #: elf/ldconfig.c:130 |
| msgid "Manually link individual libraries." |
| msgstr "手動個別連結函式庫" |
| |
| #: elf/ldconfig.c:131 |
| msgid "Format to use: new, old or compat (default)" |
| msgstr "將使用格式: 新、舊或相容 (預設)" |
| |
| #: elf/ldconfig.c:139 |
| msgid "Configure Dynamic Linker Run Time Bindings." |
| msgstr "設定執行時期動態連接" |
| |
| #: elf/ldconfig.c:297 |
| #, c-format |
| msgid "Path `%s' given more than once" |
| msgstr "路徑 `%s' 使用超過一次" |
| |
| #: elf/ldconfig.c:341 |
| #, c-format |
| msgid "%s is not a known library type" |
| msgstr "%s 不是一個已知的函式庫型態" |
| |
| #: elf/ldconfig.c:361 |
| #, c-format |
| msgid "Can't stat %s" |
| msgstr "無法 stat %s" |
| |
| #: elf/ldconfig.c:431 |
| #, c-format |
| msgid "Can't stat %s\n" |
| msgstr "無法 stat %s\n" |
| |
| #: elf/ldconfig.c:441 |
| #, c-format |
| msgid "%s is not a symbolic link\n" |
| msgstr "%s 不是一個符號連接檔\n" |
| |
| #: elf/ldconfig.c:460 |
| #, c-format |
| msgid "Can't unlink %s" |
| msgstr "無法取消連結 %s" |
| |
| #: elf/ldconfig.c:466 |
| #, c-format |
| msgid "Can't link %s to %s" |
| msgstr "無法從 %s 連結到 %s" |
| |
| #: elf/ldconfig.c:472 |
| msgid " (changed)\n" |
| msgstr " (已改變)\n" |
| |
| #: elf/ldconfig.c:474 |
| msgid " (SKIPPED)\n" |
| msgstr " (忽略)\n" |
| |
| #: elf/ldconfig.c:529 |
| #, c-format |
| msgid "Can't find %s" |
| msgstr "找不到 %s" |
| |
| #: elf/ldconfig.c:545 |
| #, c-format |
| msgid "Can't lstat %s" |
| msgstr "無法 lstat %s" |
| |
| #: elf/ldconfig.c:552 |
| #, c-format |
| msgid "Ignored file %s since it is not a regular file." |
| msgstr "忽略檔案 %s 因為它不是一個正常的檔案。" |
| |
| #: elf/ldconfig.c:560 |
| #, c-format |
| msgid "No link created since soname could not be found for %s" |
| msgstr "由於找不到 %s 的共用目的檔名稱,連結並未被建立" |
| |
| #: elf/ldconfig.c:651 |
| #, c-format |
| msgid "Can't open directory %s" |
| msgstr "無法開啟目錄 %s" |
| |
| #: elf/ldconfig.c:706 elf/ldconfig.c:753 |
| #, c-format |
| msgid "Cannot lstat %s" |
| msgstr "無法 lstat %s" |
| |
| #: elf/ldconfig.c:718 |
| #, c-format |
| msgid "Cannot stat %s" |
| msgstr "無法 stat %s" |
| |
| #: elf/ldconfig.c:775 elf/readlib.c:92 |
| #, c-format |
| msgid "Input file %s not found.\n" |
| msgstr "輸入檔 %s 找不到。\n" |
| |
| #: elf/ldconfig.c:826 |
| #, c-format |
| msgid "libc5 library %s in wrong directory" |
| msgstr "libc5 函式庫 %s 擺錯目錄了" |
| |
| #: elf/ldconfig.c:829 |
| #, c-format |
| msgid "libc6 library %s in wrong directory" |
| msgstr "libc6 函式庫 %s 擺錯目錄了" |
| |
| #: elf/ldconfig.c:832 |
| #, c-format |
| msgid "libc4 library %s in wrong directory" |
| msgstr "libc4 函式庫 %s 擺錯目錄了" |
| |
| #: elf/ldconfig.c:859 |
| #, c-format |
| msgid "libraries %s and %s in directory %s have same soname but different type." |
| msgstr "函式庫 %s 跟 %s (在目錄 %s 底下) 有共同的共用函式庫名稱,不過其格式卻不同" |
| |
| #: elf/ldconfig.c:962 |
| #, c-format |
| msgid "Can't open configuration file %s" |
| msgstr "無法開啟設定檔 %s" |
| |
| #: elf/ldconfig.c:1033 |
| #, c-format |
| msgid "relative path `%s' used to build cache" |
| msgstr "用來建置快取的相對路徑 `%s'" |
| |
| #: elf/ldconfig.c:1057 |
| msgid "Can't chdir to /" |
| msgstr "無法變更目錄到 /" |
| |
| #: elf/ldconfig.c:1099 |
| #, c-format |
| msgid "Can't open cache file directory %s\n" |
| msgstr "無法開啟快取檔案目錄 %s\n" |
| |
| #: elf/readlib.c:98 |
| #, c-format |
| msgid "Cannot fstat file %s.\n" |
| msgstr "無法 fstat 檔案 %s。\n" |
| |
| #: elf/readlib.c:108 |
| #, c-format |
| msgid "File %s is too small, not checked." |
| msgstr "檔案 %s 太小,不做檢查。" |
| |
| #: elf/readlib.c:117 |
| #, c-format |
| msgid "Cannot mmap file %s.\n" |
| msgstr "無法 mmap 檔案 %s。\n" |
| |
| #: elf/readlib.c:155 |
| #, c-format |
| msgid "%s is not an ELF file - it has the wrong magic bytes at the start.\n" |
| msgstr "%s 不是一個 ELF 檔 - 其開頭的魔術位元組是錯的。\n" |
| |
| #: elf/sprof.c:72 |
| msgid "Output selection:" |
| msgstr "輸出選擇:" |
| |
| #: elf/sprof.c:74 |
| msgid "print list of count paths and their number of use" |
| msgstr "列出計數的路徑以及它們使用的次數" |
| |
| #: elf/sprof.c:76 |
| msgid "generate flat profile with counts and ticks" |
| msgstr "從執行次數與經歷時間的資料中產生直接的測速結果" |
| |
| #: elf/sprof.c:77 |
| msgid "generate call graph" |
| msgstr "產生函式呼叫圖形" |
| |
| #: elf/sprof.c:84 |
| msgid "Read and display shared object profiling data" |
| msgstr "讀取並顯示共用函式的測速評估資料" |
| |
| #: elf/sprof.c:87 |
| msgid "SHOBJ [PROFDATA]" |
| msgstr "SHOBJ [PROFDATA]" |
| |
| #: elf/sprof.c:398 |
| #, c-format |
| msgid "failed to load shared object `%s'" |
| msgstr "開啟共用目的檔 `%s' 失敗" |
| |
| #: elf/sprof.c:407 |
| msgid "cannot create internal descriptors" |
| msgstr "無法建立內部敘述項" |
| |
| #: elf/sprof.c:526 |
| #, c-format |
| msgid "Reopening shared object `%s' failed" |
| msgstr "重新開啟共用目的檔 %s 失敗" |
| |
| #: elf/sprof.c:534 |
| msgid "mapping of section headers failed" |
| msgstr "映射結區標頭失敗" |
| |
| #: elf/sprof.c:544 |
| msgid "mapping of section header string table failed" |
| msgstr "映射結區的標頭字串表格失敗" |
| |
| #: elf/sprof.c:564 |
| #, c-format |
| msgid "*** The file `%s' is stripped: no detailed analysis possible\n" |
| msgstr "*** 檔案 `%s' 被裁剪了: 無法做詳細的分析\n" |
| |
| #: elf/sprof.c:594 |
| msgid "failed to load symbol data" |
| msgstr "載入函式符號資料失敗" |
| |
| #: elf/sprof.c:664 |
| msgid "cannot load profiling data" |
| msgstr "無法載入測試資料" |
| |
| #: elf/sprof.c:673 |
| msgid "while stat'ing profiling data file" |
| msgstr "在對測試資料檔案進行統計的時候" |
| |
| #: elf/sprof.c:681 |
| #, c-format |
| msgid "profiling data file `%s' does not match shared object `%s'" |
| msgstr "測試資料檔 `%s' 與共用目的檔 `%s' 不符合" |
| |
| #: elf/sprof.c:692 |
| msgid "failed to mmap the profiling data file" |
| msgstr "測試資料檔案 mmap 失敗" |
| |
| #: elf/sprof.c:700 |
| msgid "error while closing the profiling data file" |
| msgstr "正在關閉測試資料檔案時發生錯誤" |
| |
| #: elf/sprof.c:709 elf/sprof.c:779 |
| msgid "cannot create internal descriptor" |
| msgstr "無法建立內部敘述項" |
| |
| #: elf/sprof.c:755 |
| #, c-format |
| msgid "`%s' is no correct profile data file for `%s'" |
| msgstr "`%s' 不是 `%s' 中正確的測速評估資料檔" |
| |
| #: elf/sprof.c:936 elf/sprof.c:988 |
| msgid "cannot allocate symbol data" |
| msgstr "無法配置函式符號資料" |