| |
| Overview of changes in libqmi 1.14.0 |
| ---------------------------------------- |
| |
| * This version comes with a couple of small API breaks: |
| ** ECIO value type in "NAS Event Report Indication" is given as unsigned. |
| ** ECIO value in ECIO List array type in "NAS Get Signal Strenght" is given as |
| unsigned. |
| ** QMI_NAS_SIM_REJECT_STATE_SIM_AVAILABLE enum name was fixed. |
| |
| * The library and tools now support working with modems which only implement raw |
| IP (i.e. no ethernet headers) in the WWAN interface. This relies on the kernel |
| to expose '/sys/class/net/<WWAN>/qmi/raw_ip' sysfs files for each WWAN network |
| interface (available since Linux 4.5-rc1). |
| |
| * New initial support for the 'Voice' service. |
| |
| * New request/responses: |
| ** wms: new "Get Supported Messages" request/response. |
| ** wds: new "Get Supported Messages" request/response. |
| ** voice: new "Get Supported Messages" request/response. |
| ** uim: new "Get Supported Messages" request/response. |
| ** nas: new "Get Supported Messages" request/response. |
| ** wda: new "Get Supported Messages" request/response. |
| ** dms: new "Get Supported Messages" request/response. |
| ** wds: new "Set Autoconnect Setting" request/response. |
| ** wds: new "Get Autoconnect Setting" request/response. |
| ** wds: new "Get PDN Throttle Info" request/response. |
| ** uim: new "Change PIN" request/response. |
| ** uim: new "Unblock PIN" request/response. |
| ** uim: new "Verify PIN" request/response. |
| ** uim: new "Set PIN protection" request/response. |
| ** voice: new "Dial Call" request/response. |
| ** voice: new "End Call" request/response. |
| ** voice: new "Answer Call" request/response. |
| ** voice: new "Get Config" request/response. |
| ** voice: new "Get Supported Messages" request/response. |
| |
| * New indications: |
| ** wms: new "SMSC Address" indication. |
| ** pds: new "GPS Ready" indication. |
| ** wds: new "Packet Service Status" indication. |
| |
| * New TLVs supported in existing messages: |
| ** wds: support "UMTS Granted QoS" TLV in 'Get Current Settings'. |
| ** nas: support "Home Network 3GPP MNC" in "Get Home Network" to know whether |
| MNC is 2 or 3 digits. |
| |
| * The qmicli tool has been updated with several new functionalities: |
| ** New '--get-wwan-iface' command line option to allow querying which is the |
| WWAN interface associated with a given /dev/cdc-wdm device. |
| ** New '--wds-get-current-settings' command line option to query the current |
| settings in the WDS service. |
| ** New '--get-expected-data-format' and '--set-expected-data-format' actions |
| to get or set the data format expected by the kernel. |
| ** LTE band descriptions are now printed along with the EARFCN. |
| ** Updated '--wds-start-network' arguments to allow specifying "key=value" |
| pairs. The old legacy "[(APN),(PAP|CHAP|BOTH),(Username),(Password)]" |
| format is kept as valid for backwards compatibility, although it should be |
| assumed deprecated. |
| ** Updated '--wds-start/stop-network' to allow autoconnect settings, and 3GPP |
| or 3GPP2 profile parameters. |
| |
| * The qmi-network helper script has been updated with several new features: |
| ** Allow running with the qmi-proxy. |
| ** Allow running qmi-network with multiple devices at the same time. |
| ** Automatic link layer protocol update before connecting. |
| ** Allow specifying APN user/password. |
| |
| * Added command completion support in qmicli. |
| |
| * Other bugfixes and minor improvements. |
| |
| The following features which were backported to 1.12.x releases are also present |
| in libqmi 1.14.0: |
| |
| * New request/responses: |
| ** dms: new "Set FCC Authentication" request/response. |
| |
| |
| Overview of changes in libqmi 1.12.0 |
| ---------------------------------------- |
| |
| * New `--enable-qmi-username' option during configure, which allows specifying |
| which will be the user owning the /dev/cdc-wdm character devices of all QMI |
| modems (udev rules are installed to change file ownership). If this option is |
| used, the qmi-proxy will only allow connections from processes running by the |
| specified user or by the root user. |
| |
| * New TLV builder and reader API, which is much more strict and secure. The |
| autogenerated code will no longer first check if there is enough space |
| available in the output message buffer and then write the parsed contents. |
| Instead, the new reader API will be used, which is able to check for the |
| expected size directly before writing in the buffer. |
| |
| * New unit tests to check messages built by the libqmi-glib library, using a |
| fake proxy. In order to support these, the QmiDevice has two new properties: |
| ** "device-no-file-check": instructs the QmiDevice to avoid checking if the |
| specified file exists. |
| ** "device-proxy-path": specifies a custom abstract socket path for the |
| QmiProxy, to avoid using the default one. |
| |
| * New A-GPS support in the PDS service: |
| ** pds: added "Get Default Tracking Session" request/response |
| ** pds: added "Set Default Tracking Session" request/response |
| ** pds: added "Get AGPS Config" request/response |
| ** pds: added "Set AGPS Config" request/response |
| |
| * Updated minumum available version of several messages: |
| ** dms: "UIM Get IMSI" seems to be available in DMS 1.1 already |
| ** dms: "UIM Get ICCID" seems to be available in DMS 1.1 already |
| |
| * Other bugfixes and minor improvements: |
| ** Attach timeout and idle events to the thread-default context. |
| ** Fix bashisms in the qmi-network script. |
| ** Fix qmi_message_set_transaction_id() in non-CTL messages. |
| ** Fix segfault due to race condition in the QmiProxy. |
| ** Fixed printing contents of structs with fixed sized strings in qmi-codegen. |
| |
| |
| Overview of changes in libqmi 1.10.0 |
| ---------------------------------------- |
| |
| * Fixed default internal proxy timeout for requests. |
| * Added initial support for the WDA service. |
| * Added support for cell location info retrieval. |
| * Added support for UIM card status retrieval. |
| * Added support to specify net open flags in the command line. |
| |
| |
| Overview of changes in libqmi 1.8.0 |
| ---------------------------------------- |
| |
| This version comes with one small API break: |
| * Enum value QMI_SERVICE_RMTFS is not 0x14, but 14. I doubt anyone has been hit |
| by this issue, anyway. |
| |
| Additional changes include: |
| * Support for sharing the QMI port through multiple processes with the new |
| 'qmi-proxy' infrastructure. |
| * api: added new known service ID enumeration values |
| * wds: added "Get Profile List" request/response |
| * wds: added "Get Profile Settings" request/response |
| * wds: added "Get Default Settings" request/response |
| * cli: add --wds-get-profile-list |
| * cli: add --wds-get-default-settings |
| * man: added qmi-network manpage, autogenerated from --help-all |
| |
| |
| Overview of changes in libqmi 1.6.0 |
| ---------------------------------------- |
| |
| This version comes with one small API break: |
| * dms: 'SID' TLV in "Activate Manual" is a guint8, not a string |
| |
| Additional changes include: |
| * Extended API with macros to check for the libqmi-glib version in use |
| * Setup libtool versioning in libqmi-glib |
| * Added initial support for the PBM (phonebook) service |
| * Added initial support for the UIM service |
| * Added initial support for the OMA (Open Mobile Alliance) service |
| * nas: added "Get Tx Rx Info" request/response |
| * wds: added "Get Packet Statistics" request/response |
| * dms: added support for the 'PRL' TLV in "Activate Manual" |
| * cli: add --nas-get-tx-rx-info |
| * cli: add --wds-get-packet-statistics |
| * cli: add --get-service-version-info |
| * cli: add --uim-read-transparent |
| * cli: add --uim-get-file-attributes |
| * cli: fix following network status until disconnected |
| * tests: use gtester to run unit tests |
| * man: added qmicli manpage, autogenerated from --help-all |
| * Also fixed several minor bugs and memory leaks |
| |
| |
| Overview of changes in libqmi 1.4.0 |
| ---------------------------------------- |
| |
| * dms: fix minimum version requirement for DMS Get/Set Operating Mode |
| * nas: added 'Network Time' indication |
| * utils: fix reading sized uints in BE systems |
| * cli: add --dms-activate-manual |
| * cli: implemented setting System Selection Preference |
| * cli: fix technology preference persistence reporting |
| * cli: fix reading new PIN in '--dms-uim-change-pin' |
| * docs: always generate documentation at dist time |
| * tests: fixed BE/LE tests in BE systems |
| |
| |
| Overview of changes in libqmi 1.2.0 |
| ---------------------------------------- |
| |
| * Builds with Python3 |
| * Fixed DMS activation code string handling |
| * Enhanced "start network" functionality in qmicli |
| |
| |
| Overview of changes in libqmi 1.0 |
| ---------------------------------------- |
| |
| Initial release. |