| intel-vaapi-driver NEWS -- summary of changes. 2019-11-xx |
| Copyright (C) 2009-2019 Intel Corporation |
| |
| Version 2.4.0 - DD.Dec.2019 |
| * Bump version to 2.4.0 for maintenance release |
| * Fix the dependency on libEGL |
| * Fix ROI support |
| * Fix FD leaks on Wayland |
| * Fix BRC setting |
| * Fix VP8 encoder |
| * Fix VP9 encoder |
| * Fix meson build |
| |
| Version 2.3.0 - 10.Dec.2018 |
| * Bump version to 2.3.0 |
| * Add new PCI ID for KBL and CFL |
| * Fix frame corruption when there are big MVs in VP8 encoding |
| * Fix dynamically bitrate resetting in AVC encoding |
| * Fix build errors when the toolchain doesn't support -fstack-protector |
| * Fix memory leak issue |
| * Make sure the achieved bitrate meet the requirement for VP8 encoding |
| * Optimize VPP on GEN8 |
| |
| Version 2.2.0 - 11.Jul.2018 |
| * Bump version to 2.2.0 |
| * Add new PCI ID for KBL-Y |
| * Add meson support |
| * Fix for VC1 decoding issues |
| * Fix VP8 encoding issues |
| * Fix the over-run issue in HEVC encoding |
| * Fix the max MV length in MPEG-2 encoding |
| * Fix packed header mode |
| * Fix building issue on Android |
| |
| Version 2.1.0 - 12.Feb.2018 |
| * Bump version to 2.1.0 |
| * Add support for Cannolake (aka. CNL) |
| - Decoding: H.264/MPEG-2/VC-1/JPEG/VP8/HEVC/HEVC 10-bit/VP9/VP9 10-bit |
| - Encoding: H.264/MPEG-2/JPEG/VP8/VP9/HEVC/HEVC 10-bit/{VP9,AVC} low power |
| - VPP: CSC/scaling/NoiseReduction/Deinterlacing{Bob, MotionAdaptive, MotionCompensated}/ColorBalance/STD |
| * Add support for VC1 interlaced video decoding |
| * Add support for Stats/PreEnc on GEN9 |
| * Add support for vaExportSurfaceHandle() |
| * Add new PCI IDs for CFL |
| * Add mininum resolution query for encoder |
| * Ehance the logging to provide informational messages |
| * Fix VP9 brc issue on KBL |
| * A lot of bug fixes |
| |
| Version 2.0.0 - 21.Oct.2017 |
| * Bump version to 2.0.0 |
| * Add support for Coffee Lake (aka. CFL) |
| - Decoding: H.264/MPEG-2/VC-1/JPEG/VP8/HEVC/HEVC 10-bit/VP9/VP9 10-bit |
| - Encoding: H.264/MPEG-2/JPEG/VP8/VP9/HEVC/HEVC 10-bit/AVC low power CQP/CBR/VBR mode |
| - VPP: CSC/scaling/NoiseReduction/Deinterlacing{Bob, MotionAdaptive, MotionCompensated}/ColorBalance/STD |
| * Add support for H264 FEI |
| * Add support for HEVC ROI encoding |
| * Add support for intensity compensation for VC-1 decoding |
| * Improve the quality of the H264 encoder on BDW/BSW |
| * Improve the CSC performance between I420/NV12/P010/YUY2/VYUY format |
| * Improve the performace of va{Get, Put}Image for I420/NV12/P010/YUY2/VYUY format |
| * Fix image corruption for VP9 decoding |
| * Fix race condition in wayland support |
| * Fix ROI support in VDEnc support |
| * Fix corrupted stream when using VDEnc CBR/VBR |
| * Fix GCC 7.1.1 warnings/errors |
| * Update the shader for HEVC encoding |
| |
| Version 1.8.3 - 28.Jun.2017 |
| * Add support for Gemini Lake (aka. GLK) |
| - Decoding: H.264/MPEG-2/VC-1/JPEG/VP8/HEVC/HEVC 10-bit/VP9/VP9 10-bit |
| - Encoding: H.264/MPEG-2/JPEG/VP8/VP9/HEVC/HEVC 10-bit/AVC low power CQP mode |
| - VPP: CSC/scaling/NoiseReduction/Deinterlacing{Bob, MotionAdaptive, MotionCompensated}/ColorBalance/STD |
| * Improve the quality of the HEVC encoder on SKL+ for CQP and CBR mode |
| * Add support for HEVC VBR mode on SKL+ |
| * Set the quality range for HEVC / AVC encoder to 7 |
| * Fix VP9 encoding quality issue on KBL |
| * Fix build issue on Android |
| * Fix the wrong order for AUD NAL unit in AVC encoder |
| * Fix the condition of enabling H.264 MB rate control |
| * Fix the memory leak issue in JPEG decoding |
| |
| Version 1.8.2 - 22.May.2017 |
| * Add support for querying slice structure for AVC encoding |
| * Add support for AVC multi-slice encoding on SKL+ |
| * Add support for MVC encoding on SKL+ |
| * Fix bad frame on SKL and BXT when the quality level is set to 1 |
| |
| Version 1.8.1 - 10.Apr.2017 |
| * Add support for VAConfigAttribEncMaxSlices |
| * Disable AVC multi-slice encoding on SKL+ |
| * Disable AVC ROI encoding on SKL+ |
| * Disable bitrate control per temporal layer on SKL+ |
| * Disable MVC encoding on SKL+ |
| |
| Version 1.8.0 - 31.Mar.2017 |
| * Improve the quality of the H.264 encoder on SKL+ for CQP and CBR mode |
| * Improve the quality of the VP8 encoder on BSW+ for CQP and CBR mode |
| * Add support for H.264 VBR mode on SKL+ |
| * Add support for VP8 VBR mode on BSW+ |
| * Add support for low-power H.264 encoder on BXT and KBL |
| * Add support for CBR / VBR with low-power H.264 encoder on SKL+ (A HuC Firmware and |
| a HuC supported Linux kernel are required) |
| * Add support for CSC and scaling with 10bit P010/I010 surface |
| * Optimize CSC and scaling with 8bit NV12 and I420 surface |
| * Fix the wrong memory object cache setting on SKL+ |
| * Fix the EU number in media pipeline |
| * Fix the wrong bit shift in H.264 encoder |
| * Fix the 48bit graphics address on BSW+ |
| * Fix building on NetBSD |
| * Known issues |
| - The new AVC encoder doesn't support MVC/SVC encoding |
| - The new AVC encoder doesn't support ROI encoding |
| - The new AVC encoder doesn't support multiple slice encoding |
| |
| Version 1.7.3 - 10.Nov.2016 |
| * Add support for HEVC 10bit encoding on KBL |
| * Integrate the Google Test Framework for unit testing |
| * Add support for bitrate control per temporal layer for SVC-T |
| * Fix VA_STATUS_ERROR_UNIMPLEMENTED when sharpening with I420 surface |
| (https://bugs.freedesktop.org/show_bug.cgi?id=96987) |
| * Fix crop issue when sharpening with NV12 surface |
| (https://bugs.freedesktop.org/show_bug.cgi?id=96988) |
| * Fix GPU hang issue when using encoding with low power on SKL GT3+ |
| (https://bugs.freedesktop.org/show_bug.cgi?id=97872) |
| |
| Version 1.7.2 - 05.Sep.2016 |
| * Update PCI IDs for KBL |
| * Allow up to 8K JPEG decoding/encoding on SKL+ |
| * Add support for ROI on IVB+ |
| * Support I420/YV12 input surface for VP9 encoding |
| * Fix assertion failure when decoding stream through VLC |
| (https://bugs.freedesktop.org/show_bug.cgi?id=94007) |
| * Fix image corruption in ColorBalance and STDE on BDW+ |
| (https://bugs.freedesktop.org/show_bug.cgi?id=95349) |
| * Fix run2run issue in H.264 encoder |
| (https://bugs.freedesktop.org/show_bug.cgi?id=96703) |
| * Fix video rendering corruption when using VAAPI postproc denoise on 1080p videos |
| (https://bugs.freedesktop.org/show_bug.cgi?id=96739) |
| * Fix image corruption in ColorBalance with hue=-180 |
| (https://bugs.freedesktop.org/show_bug.cgi?id=96744) |
| * Fix memory leak in VP8 encoding |
| (https://bugs.freedesktop.org/show_bug.cgi?id=97272) |
| |
| Version 1.7.1 - 21.Jun.2016 |
| * Add support VP9 8bit encoding on KBL |
| * Add support for low-power/high-performance H.264 encoder on SKL |
| * Fix incorrect color space conversion in driver |
| (https://bugs.freedesktop.org/show_bug.cgi?id=94845) |
| * Fix FPS caculation for HEVC encoder |
| * Fix VP9 10bit decoding issue on KBL |
| * Fix the noise issue when VA_FILTER_SCALING_HQ upscaling from 1280x720 to 1920x1080 with YUY2 format on BDW+ |
| (https://bugs.freedesktop.org/show_bug.cgi?id=94765) |
| |
| Version 1.7.0 - 15.Mar.2016 |
| * Add support for Kabylake |
| - Decoding: H.264/MPEG-2/VC-1/JPEG/VP8/HEVC/HEVC 10-bit/VP9/VP9 10-bit |
| - Encoding: H.264/MPEG-2/JPEG/VP8/HEVC |
| - VPP: CSC/scaling/NoiseReduction/Deinterlacing{Bob, MotionAdaptive, MotionCompensated}/ColorBalance/STD |
| * Add new SKL and BXT PCI IDs |
| * Fix lots of VP9 decoding issues on BXT |
| |
| Version 1.6.2 - 15.Dec.2015 |
| * Add support for Broxton |
| - Decoding: H.264/MPEG-2/VC-1/JPEG/VP8/HEVC/HEVC 10-bit/VP9 |
| - Encoding: H.264/JPEG/VP8/HEVC |
| - VPP: CSC/scaling/NoiseReduction/Deinterlacing{Bob, MotionAdaptive, MotionCompensated}/ColorBalance/STD |
| * Add support for HEVC CBR on SKL |
| * Fix the broken VA_FILTER_SCALING_HQ on SKL |
| * Fix the incorrect loading of GPU shaders on GEN8/GEN9 |
| * Fix the wrong address relocation in VPP on GEN8/GEN9 |
| * Fix the wrong VAImage foramt |
| (https://bugs.freedesktop.org/show_bug.cgi?id=92088) |
| * Fix YUV to RGB conversion on GEN7/GEN8/GEN9 |
| * Fix the segmentation fault causing by NULL buffer object on SNB |
| (The issue mentioned in https://bugs.freedesktop.org/show_bug.cgi?id=92811) |
| * Fix the wrong coordinate used in VPP |
| (The issue mentioned in https://bugs.freedesktop.org/show_bug.cgi?id=92811) |
| |
| Version 1.6.1 - 09.Sep.2015 |
| * Wrapper other backend driver to support VP9 hybrid decoding on BDW/BSW/SKL (--enable-hybrid-codec) |
| * Fix HEVC decoding issue on BSW/SKL |
| * Fix HEVC encoding on SKL GT3 |
| * Fix GPU hang issue when decoding H.264 MBAFF clips |
| (https://bugs.freedesktop.org/show_bug.cgi?id=91207) |
| * Fix issues detected by klockwork scan |
| * Combine csc/scaling together to optimize the performance |
| |
| Version 1.6.0 - 01.Jul.2015 |
| * Add support for VP8 encoding (CQP, CBR) on BSW/SKL |
| * Add support for HEVC decoding on BSW |
| * Add support for HEVC encoding (CQP) on SKL |
| * Add support for low-power mode (VA_PROC_PIPELINE_FAST) in VPP to discard |
| any complex operation that would consume too many HW resources |
| * Fix memory leak issue for JPEG decoding |
| * Fix HEVC decoding issue on BSW/SKL |
| * Fix GPU hang issue caused by VP8 decoding on BDW/BSW |
| * Fix MADI/MCDI issues on SNB/IVB |
| * Improve the JPEG encoding quality |
| * Optimize MPEG-2 start code search on IVB |
| |
| Version 1.5.1 - DD.03.2015 |
| * Fix forward reference requirement for Bob deinterlacing |
| * Fix a lot of potential rendering issues on GEN8+ |
| * Fix scaling of NV12 surfaces when no output_region is set |
| * Fix the broken attribute setting of i965_GetConfigAttrib |
| * Fix the GetConfigAttributes() for JPEGBaseline profile |
| * Fix the wrong overlap setting for VC-1 decoding on GEN6+ |
| * Fix VP8 decoding issue on GEN8+, HW needs 1 extra byte for each partition |
| * Fix JPEG encoding issue. |
| * Add support for aub dump |
| * Enhance STD on GEN8+ |
| * Implement max width and height in QuerySurfaceAttributes |
| * Add new SKL PCI ids |
| |
| Version 1.5.0 - 28.Dec.2014 |
| * Add support for Skylake |
| - Decoding: H.264/MPEG-2/VC-1/JPEG/VP8/HEVC |
| - Encoding: H.264/MPEG-2/JPEG |
| - VPP: CSC/scaling/NoiseReduction/Deinterlacing{Bob, MotionAdaptive, MotionCompensated}/ColorBalance/STD |
| * Add support for JPEG encoding on Braswell |
| * Add enhancement for video post/pre processing |
| * Fix out of tree builds (Emil Velikov) |
| |
| Version 1.4.1 - 24.Oct.2014 |
| * Use a new method to detect encoding capabilitiy on Haswell |
| |
| Version 1.4.0 - 30.Sep.2014 |
| * Add support for exporting VA buffer |
| * Add support for MVC decoding/encoding |
| * Add support for encoding quality level on Sandybride and newer |
| * Add support of inserting packed slice header & raw data for encoding |
| * Add support for Cherryview |
| * Fix the GPU hang issue on Ivybridge when using the gstreamer and mplayer to play back one H264 clip |
| (https://bugs.freedesktop.org/show_bug.cgi?id=80720) |
| * Fix the GPU hang issue on Sandybride and newer when playing back one H264 clip |
| (https://bugs.freedesktop.org/show_bug.cgi?id=76363) |
| * Fix the GPU hang issue on Haswell when using XBMC to play back one H264 clip |
| (https://bugs.freedesktop.org/show_bug.cgi?id=81447) |
| |
| Version 1.3.2 - 16.Jun.2014 |
| * Export JPEG format by vaDeriveImage() |
| * Add support for MADI on SNB |
| * H.264: fix the support for grayscale format (Y800) |
| * Fix vaGetConfigAttributes() to validate the profile/entrypoint pair |
| * Fix vaCreateConfig() to not override user chroma format |
| * Fix the scaling issue on IVB/HSW/BDW |
| * Fix https://bugs.freedesktop.org/show_bug.cgi?id=73424 |
| * Fix https://bugs.freedesktop.org/show_bug.cgi?id=72522 |
| * Fix https://bugs.freedesktop.org/show_bug.cgi?id=77041 |
| * Quality improvement for H.264 encoding on BDW |
| |
| Version 1.3.1 - 09.May.2014 |
| * Add support for STE on Broadwell |
| * Add support for YV16 |
| * Add support for user specified tiling and stride |
| * Fix VP8 decoding on Broadwell |
| * Fix the wrong alpha when convert NV12 into RGBA |
| * Fix https://bugs.freedesktop.org/show_bug.cgi?id=77386 |
| |
| Version 1.3.0 - 24.Mar.2014 |
| * Add support for Broadwell |
| - Decoding: H.264/MPEG-2/VC-1/JPEG/VP8 |
| - Encoding: H.264/MPEG-2 |
| - VPP: CSC/scaling/NoiseReduction/Deinterlacing{Bob, MotionAdaptive, MotionCompensated}/Sharpening/ColorBalance |
| * Fix the wrong setting in MI_BATCH_BATCH_START |
| |
| Version 1.2.2 - 16.Dec.2013 |
| * Motion compensation DI on HSW |
| * Optimization of FPS for H.264 encoding on HSW |
| * Add brightness/contrast/hue/saturation support for rendering. |
| * Support BT601/BT709/SMPTE240 in vaPutSurface() |
| * Expose Constrained Baseline Profile instead of Baseline Profile for H.264 |
| * Bug fixes |
| |
| Version 1.2.1 - 23.Sep.2013 |
| * Add PCI IDs for Bay Trail |
| * Performance improvement for MPEG-2 Encoding on IVB/HSW |
| * Add basic processing support for packed YUV to packed YUV on ILK+ |
| * Check the underlying OS support for VEBOX on HSW |
| * Quality improvement for BobDI on SNB/IVB |
| * Add support for Motion Adaptive Deinterlacing on IVB |
| * vaDeriveImage() works for UYVY formats |
| * Fix thread safety issue |
| * Fix GPU hang issue when decoding some videos on SNB |
| * Fix output filter count from QueryVideoProcFilters() |
| |
| Version 1.2.0 - 26.Jun.2013 |
| * The new H.264 encoding API on SNB/IVB/HSW |
| - Profile: BP/MP/HP |
| - Entropy Coding: CAVLC/CABAC |
| - Rate Control: CQP, CBR |
| - Progressive frame |
| - Multi Slice encoding |
| - Configurable GOP Structure |
| * MPEG-2 encoding on IVB/HSW |
| - Profile: SP/MP |
| - Progressive frame |
| - Configurable GOP Structure |
| * Video process on ILK/SNB/IVB/HSW |
| - CSC/scaling on ILK |
| - CSC/scaling/NoiseReduction/Deinterlacing{Bob} on SNB/IVB |
| - CSC/scaling/NoiseReduction/Deinterlacing{Bob,MotionAdaptive}/Sharpening/ColorBalance on HSW |
| * Implement vaQuerySurfaceAttributes() |
| * Implement the new version of vaCreateSurfaces() |
| - Create VA surface with specified fourcc |
| - Create VA surface from external buffer |
| . flinked GEM buffer |
| . prime/dma buffer |
| * Optimize H.264 encoding on IVB/HSW |
| * More reserved PCI IDs for HSW |
| * A lot of bug fixes |
| |
| Version 1.0.20 - 19.Mar.2013 |
| * Add support for wayland 1.0 protocol (Rob Bradford) |
| * Add global alpha support for subpicture |
| * Add support for IA88/AI88 subpicture |
| * Support up to 4 subpictures for each VA surface |
| * Update PCI IDs for Haswell CRW |
| * Automake 1.13 fixups (Armin K) |
| * Fix libva-intel-driver-1.0.19 display corruption on IVB GT1 |
| https://bugs.freedesktop.org/show_bug.cgi?id=57323 |
| * Fix decoding with FREXT02_JVC_C.264 on SNB |
| https://bugs.freedesktop.org/show_bug.cgi?id=57720 |
| * Fix H.264 decoding broken/visual errors on ILK (Tobias Jakobi) |
| https://bugs.freedesktop.org/show_bug.cgi?id=58875 |
| * Fix GPU hung with h.264 video and a resolution of 1920x816 on IVB |
| https://bugs.freedesktop.org/show_bug.cgi?id=59050 |
| |
| Version 1.0.19 - 09.Nov.2012 |
| * Add support for Haswell |
| * Add raw DRM support (Dmitry Ermilov) |
| * Add Wayland support |
| * Add support for display rotation attribute |
| * Support 4K encoding on IVB and HSW |
| * Drop explicit dependency on X11 and libva-x11 |
| * Fix VC-1 decoding when VSTRANSFORM is 0 |
| * Fix SIGSEGV caused by use-after-free of the bufmgr (Stéphane Marchesin) |
| * Fix thread safety issue (Gautam) |
| * Fix vaUnlockSurface() for libva trace |
| |
| Version 1.0.18 - 02.Aug.2012 |
| * Add JPEG decoding on Ivy Bridge |
| * Add support for a new Ivy Bridge chip |
| * Add support for vaSyncSurface() and vaQuerySurfaceStatus() (Dmitry Ermilov) |
| * Fix decoding of MPEG-2 videos with implicit IQ matrices |
| * Fix concurrent creation of VA objects (MT safety) |
| * Fix decoding of large resolution videos (up to 4K on IVB) |
| |
| Version 1.0.17 - 02.Apr.2012 |
| * Add support for IMC1/IMC3 surface formats |
| * Fix rendering of interlaced surfaces |
| * Fix MPEG-2 decoding of interlaced streams (SNB, IVB) |
| * Fix H.264 weighted prediction indicator (SNB) |
| * Fix and simplify calculation of H.264 macroblock bit offset (ILK, SNB, IVB) |
| |
| Version 1.0.16 - 14.Feb.2012 |
| * Fix VC-1 bitplane buffer size (SNB, IVB) |
| * Fix VC-1 motion vector modes for Ivy Bridge |
| * Fix MFX_QM_STATE for H.264 flat scaling lists (IVB) |
| * Fix and simplify AVC_REF_IDX_STATE setup (ILK, SNB, IVB) |
| * Fix memory leak of encoder buffers |
| * Fix check for internal VA surface format prior to rendering |
| * Add support for B43 chipset (Alexander Inyukhin) |
| |
| Version 1.0.15 - 28.Oct.2011 |
| * Add auto-generated Debian packaging |
| * Fix VC-1 decoding (TTFRM packing) |
| * Fix MPEG-2 decoding on Ivy Bridge |
| * Fix MPEG-2 decoding with sparse QM matrices updates |
| * Fix slice-param & slice-data buffer memory leaks |
| |
| Version 1.0.14 - 28.Jul.2011 |
| * Add H.264 encoding support to Ivy Bridge |
| * Add support for VA_SUBPICTURE_DESTINATION_IS_SCREEN_COORD |
| * Fix next slice vertical position for MPEG-2 (#38628) |
| * Fix subpicture scale factor for Y axis |
| * Fix GPU hang when decoding field coded MPEG-2 picture |
| * Fix memory leaks (Edgar Hucek) |
| |
| Version 1.0.13 - 25.May.2011 |
| * Add H.264 encoding support to Sandy Bridge |
| * Add MPEG-2, VC-1 and H.264 decoding support to Ivy Bridge |
| * Fix thread safety issues |
| |
| Version 1.0.11 - 14.Mar.2011 |
| * Add deinterlacing & scaling support to Sandy Bridge |
| * Add vaDeriveImage() implementation |
| * Fix VC-1 decoding for Main/Simple profiles |
| |
| Version 1.0.9 - 27.Jan.2011 |
| * Add VC-1 decoding support to Sandy Bridge |
| |
| Version 1.0.8 - 21.Jan.2011 |
| * Add support for IA44/AI44 subpicture formats (#32868) |
| |
| Version 1.0.7 - 17.Dec.2011 |
| * Add MPEG-2 and H.264 decoding support to Sandy Bridge |
| |
| Version 1.0.5 - 02.Sep.2010 |
| * Add deinterlacing & scaling support to Ironlake |
| |
| Version 1.0.4 - 13.Jul.2010 |
| * Add vaGetImage() implementation |
| * Add support for RGBA subpictures |
| * Fix H.264 decoding on Ironlake |
| |
| Version 1.0.3 - 10.Jun.2010 |
| * Add H.264 decoding support to Ironlake |
