blob: f516bf8dea4baa604400d06bc62a79f083003b55 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2021 Google LLC
* Written by Simon Glass <sjg@chromium.org>
*/
#ifndef __bootflow_h
#define __bootflow_h
#include <bootdev.h>
#include <dm/ofnode_decl.h>
#include <linux/list.h>
struct bootstd_priv;
struct expo;
enum {
BOOTFLOW_MAX_USED_DEVS = 16,
};
/**
* enum bootflow_state_t - states that a particular bootflow can be in
*
* Only bootflows in state BOOTFLOWST_READY can be used to boot.
*
* See bootflow_state[] for the names for each of these
*/
enum bootflow_state_t {
BOOTFLOWST_BASE, /**< Nothing known yet */
BOOTFLOWST_MEDIA, /**< Media exists */
BOOTFLOWST_PART, /**< Partition exists */
BOOTFLOWST_FS, /**< Filesystem exists */
BOOTFLOWST_FILE, /**< Bootflow file exists */
BOOTFLOWST_READY, /**< Bootflow file loaded */
BOOTFLOWST_COUNT
};
/**
* struct bootflow - information about a bootflow
*
* This is connected into two separate linked lists:
*
* bm_sibling - links all bootflows in the same bootdev
* glob_sibling - links all bootflows in all bootdevs
*
* @bm_node: Points to siblings in the same bootdev
* @glob_node: Points to siblings in the global list (all bootdev)
* @dev: Bootdevice device which produced this bootflow
* @blk: Block device which contains this bootflow, NULL if this is a network
* device or sandbox 'host' device
* @part: Partition number (0 for whole device)
* @fs_type: Filesystem type (FS_TYPE...) if this is fixed by the media, else 0.
* For example, the sandbox host-filesystem bootdev sets this to
* FS_TYPE_SANDBOX
* @method: Bootmethod device used to perform the boot and read files
* @name: Name of bootflow (allocated)
* @state: Current state (enum bootflow_state_t)
* @subdir: Subdirectory to fetch files from (with trailing /), or NULL if none
* @fname: Filename of bootflow file (allocated)
* @logo: Logo to display for this bootflow (BMP format)
* @logo_size: Size of the logo in bytes
* @buf: Bootflow file contents (allocated)
* @size: Size of bootflow file in bytes
* @err: Error number received (0 if OK)
* @os_name: Name of the OS / distro being booted, or NULL if not known
* (allocated)
* @fdt_fname: Filename of FDT file
* @fdt_size: Size of FDT file
* @fdt_addr: Address of loaded fdt
*/
struct bootflow {
struct list_head bm_node;
struct list_head glob_node;
struct udevice *dev;
struct udevice *blk;
int part;
int fs_type;
struct udevice *method;
char *name;
enum bootflow_state_t state;
char *subdir;
char *fname;
void *logo;
uint logo_size;
char *buf;
int size;
int err;
char *os_name;
char *fdt_fname;
int fdt_size;
ulong fdt_addr;
};
/**
* enum bootflow_flags_t - flags for the bootflow iterator
*
* @BOOTFLOWF_FIXED: Only used fixed/internal media
* @BOOTFLOWF_SHOW: Show each bootdev before scanning it; show each hunter
* before using it
* @BOOTFLOWF_ALL: Return bootflows with errors as well
* @BOOTFLOWF_HUNT: Hunt for new bootdevs using the bootdrv hunters
*
* Internal flags:
* @BOOTFLOWF_SINGLE_DEV: (internal) Just scan one bootdev
* @BOOTFLOWF_SKIP_GLOBAL: (internal) Don't scan global bootmeths
* @BOOTFLOWF_SINGLE_UCLASS: (internal) Keep scanning through all devices in
* this uclass (used with things like "mmc")
* @BOOTFLOWF_SINGLE_MEDIA: (internal) Scan one media device in the uclass (used
* with things like "mmc1")
*/
enum bootflow_flags_t {
BOOTFLOWF_FIXED = 1 << 0,
BOOTFLOWF_SHOW = 1 << 1,
BOOTFLOWF_ALL = 1 << 2,
BOOTFLOWF_HUNT = 1 << 3,
/*
* flags used internally by standard boot - do not set these when
* calling bootflow_scan_bootdev() etc.
*/
BOOTFLOWF_SINGLE_DEV = 1 << 16,
BOOTFLOWF_SKIP_GLOBAL = 1 << 17,
BOOTFLOWF_SINGLE_UCLASS = 1 << 18,
BOOTFLOWF_SINGLE_MEDIA = 1 << 19,
};
/**
* enum bootflow_meth_flags_t - flags controlling which bootmeths are used
*
* Used during iteration, e.g. by bootdev_find_by_label(), to determine which
* bootmeths are used for the current bootdev. The flags reset when the bootdev
* changes
*
* @BOOTFLOW_METHF_DHCP_ONLY: Only use dhcp (scripts and EFI)
* @BOOTFLOW_METHF_PXE_ONLY: Only use pxe (PXE boot)
* @BOOTFLOW_METHF_SINGLE_DEV: Scan only a single bootdev (used for labels like
* "3"). This is used if a sequence number is provided instead of a label
* @BOOTFLOW_METHF_SINGLE_UCLASS: Scan all bootdevs in this one uclass (used
* with things like "mmc"). If this is not set, then the bootdev has an integer
* value in the label (like "mmc2")
*/
enum bootflow_meth_flags_t {
BOOTFLOW_METHF_DHCP_ONLY = 1 << 0,
BOOTFLOW_METHF_PXE_ONLY = 1 << 1,
BOOTFLOW_METHF_SINGLE_DEV = 1 << 2,
BOOTFLOW_METHF_SINGLE_UCLASS = 1 << 3,
};
/**
* struct bootflow_iter - state for iterating through bootflows
*
* This starts at with the first bootdev/partition/bootmeth and can be used to
* iterate through all of them.
*
* Iteration starts with the bootdev. The first partition (0, i.e. whole device)
* is scanned first. For partition 0, it iterates through all the available
* bootmeths to see which one(s) can provide a bootflow. Then it moves to
* parition 1 (if there is one) and the process continues. Once all partitions
* are examined, it moves to the next bootdev.
*
* Initially @max_part is 0, meaning that only the whole device (@part=0) can be
* used. During scanning, if a partition table is found, then @max_part is
* updated to a larger value, no less than the number of available partitions.
* This ensures that iteration works through all partitions on the bootdev.
*
* @flags: Flags to use (see enum bootflow_flags_t). If BOOTFLOWF_GLOBAL_FIRST is
* enabled then the global bootmeths are being scanned, otherwise we have
* moved onto the bootdevs
* @dev: Current bootdev, NULL if none. This is only ever updated in
* bootflow_iter_set_dev()
* @part: Current partition number (0 for whole device)
* @method: Current bootmeth
* @max_part: Maximum hardware partition number in @dev, 0 if there is no
* partition table
* @first_bootable: First bootable partition, or 0 if none
* @err: Error obtained from checking the last iteration. This is used to skip
* forward (e.g. to skip the current partition because it is not valid)
* -ESHUTDOWN: try next bootdev
* @num_devs: Number of bootdevs in @dev_used
* @max_devs: Maximum number of entries in @dev_used
* @dev_used: List of bootdevs used during iteration
* @labels: List of labels to scan for bootdevs
* @cur_label: Current label being processed
* @num_methods: Number of bootmeth devices in @method_order
* @cur_method: Current method number, an index into @method_order
* @first_glob_method: First global method, if any, else -1
* @cur_prio: Current priority being scanned
* @method_order: List of bootmeth devices to use, in order. The normal methods
* appear first, then the global ones, if any
* @doing_global: true if we are iterating through the global bootmeths (which
* happens before the normal ones)
* @method_flags: flags controlling which methods should be used for this @dev
* (enum bootflow_meth_flags_t)
*/
struct bootflow_iter {
int flags;
struct udevice *dev;
int part;
struct udevice *method;
int max_part;
int first_bootable;
int err;
int num_devs;
int max_devs;
struct udevice *dev_used[BOOTFLOW_MAX_USED_DEVS];
const char *const *labels;
int cur_label;
int num_methods;
int cur_method;
int first_glob_method;
enum bootdev_prio_t cur_prio;
struct udevice **method_order;
bool doing_global;
int method_flags;
};
/**
* bootflow_init() - Set up a bootflow struct
*
* The bootflow is zeroed and set to state BOOTFLOWST_BASE
*
* @bflow: Struct to set up
* @bootdev: Bootdev to use
* @meth: Bootmeth to use
*/
void bootflow_init(struct bootflow *bflow, struct udevice *bootdev,
struct udevice *meth);
/**
* bootflow_iter_init() - Reset a bootflow iterator
*
* This sets everything to the starting point, ready for use.
*
* @iter: Place to store private info (inited by this call)
* @flags: Flags to use (see enum bootflow_flags_t)
*/
void bootflow_iter_init(struct bootflow_iter *iter, int flags);
/**
* bootflow_iter_uninit() - Free memory used by an interator
*
* @iter: Iterator to free
*/
void bootflow_iter_uninit(struct bootflow_iter *iter);
/**
* bootflow_iter_drop_bootmeth() - Remove a bootmeth from an iterator
*
* Update the iterator so that the bootmeth will not be used again while this
* iterator is in use
*
* @iter: Iterator to update
* @bmeth: Boot method to remove
*/
int bootflow_iter_drop_bootmeth(struct bootflow_iter *iter,
const struct udevice *bmeth);
/**
* bootflow_scan_first() - find the first bootflow for a device or label
*
* If @flags includes BOOTFLOWF_ALL then bootflows with errors are returned too
*
* @dev: Boot device to scan, NULL to work through all of them until it
* finds one that can supply a bootflow
* @label: Label to control the scan, NULL to work through all devices
* until it finds one that can supply a bootflow
* @iter: Place to store private info (inited by this call)
* @flags: Flags for iterator (enum bootflow_flags_t). Note that if @dev
* is NULL, then BOOTFLOWF_SKIP_GLOBAL is set automatically by this function
* @bflow: Place to put the bootflow if found
* Return: 0 if found, -ENODEV if no device, other -ve on other error
* (iteration can continue)
*/
int bootflow_scan_first(struct udevice *dev, const char *label,
struct bootflow_iter *iter, int flags,
struct bootflow *bflow);
/**
* bootflow_scan_next() - find the next bootflow
*
* This works through the available bootdev devices until it finds one that
* can supply a bootflow. It then returns that bootflow
*
* @iter: Private info (as set up by bootflow_scan_first())
* @bflow: Place to put the bootflow if found
* Return: 0 if found, -ENODEV if no device, -ESHUTDOWN if no more bootflows,
* other -ve on other error (iteration can continue)
*/
int bootflow_scan_next(struct bootflow_iter *iter, struct bootflow *bflow);
/**
* bootflow_first_glob() - Get the first bootflow from the global list
*
* Returns the first bootflow in the global list, no matter what bootflow it is
* attached to
*
* @bflowp: Returns a pointer to the bootflow
* Return: 0 if found, -ENOENT if there are no bootflows
*/
int bootflow_first_glob(struct bootflow **bflowp);
/**
* bootflow_next_glob() - Get the next bootflow from the global list
*
* Returns the next bootflow in the global list, no matter what bootflow it is
* attached to
*
* @bflowp: On entry, the last bootflow returned , e.g. from
* bootflow_first_glob()
* Return: 0 if found, -ENOENT if there are no more bootflows
*/
int bootflow_next_glob(struct bootflow **bflowp);
/**
* bootflow_free() - Free memory used by a bootflow
*
* This frees fields within @bflow, but not the @bflow pointer itself
*/
void bootflow_free(struct bootflow *bflow);
/**
* bootflow_boot() - boot a bootflow
*
* @bflow: Bootflow to boot
* Return: -EPROTO if bootflow has not been loaded, -ENOSYS if the bootflow
* type is not supported, -EFAULT if the boot returned without an error
* when we are expecting it to boot, -ENOTSUPP if trying method resulted in
* finding out that is not actually supported for this boot and should not
* be tried again unless something changes
*/
int bootflow_boot(struct bootflow *bflow);
/**
* bootflow_run_boot() - Try to boot a bootflow
*
* @iter: Current iteration (or NULL if none). Used to disable a bootmeth if the
* boot returns -ENOTSUPP
* @bflow: Bootflow to boot
* Return: result of trying to boot
*/
int bootflow_run_boot(struct bootflow_iter *iter, struct bootflow *bflow);
/**
* bootflow_state_get_name() - Get the name of a bootflow state
*
* @state: State to check
* Return: name, or "?" if invalid
*/
const char *bootflow_state_get_name(enum bootflow_state_t state);
/**
* bootflow_remove() - Remove a bootflow and free its memory
*
* This updates the linked lists containing the bootflow then frees it.
*
* @bflow: Bootflow to remove
*/
void bootflow_remove(struct bootflow *bflow);
/**
* bootflow_iter_check_blk() - Check that a bootflow uses a block device
*
* This checks the bootdev in the bootflow to make sure it uses a block device
*
* Return: 0 if OK, -ENOTSUPP if some other device is used (e.g. ethernet)
*/
int bootflow_iter_check_blk(const struct bootflow_iter *iter);
/**
* bootflow_iter_check_sf() - Check that a bootflow uses SPI FLASH
*
* This checks the bootdev in the bootflow to make sure it uses SPI flash
*
* Return: 0 if OK, -ENOTSUPP if some other device is used (e.g. ethernet)
*/
int bootflow_iter_check_sf(const struct bootflow_iter *iter);
/**
* bootflow_iter_check_net() - Check that a bootflow uses a network device
*
* This checks the bootdev in the bootflow to make sure it uses a network
* device
*
* Return: 0 if OK, -ENOTSUPP if some other device is used (e.g. MMC)
*/
int bootflow_iter_check_net(const struct bootflow_iter *iter);
/**
* bootflow_iter_check_system() - Check that a bootflow uses the bootstd device
*
* This checks the bootdev in the bootflow to make sure it uses the bootstd
* device
*
* Return: 0 if OK, -ENOTSUPP if some other device is used (e.g. MMC)
*/
int bootflow_iter_check_system(const struct bootflow_iter *iter);
/**
* bootflow_menu_new() - Create a new bootflow menu
*
* @expp: Returns the expo created
* Returns 0 on success, -ve on error
*/
int bootflow_menu_new(struct expo **expp);
/**
* bootflow_menu_apply_theme() - Apply a theme to a bootmenu
*
* @exp: Expo to update
* @node: Node containing the theme information
* Returns 0 on success, -ve on error
*/
int bootflow_menu_apply_theme(struct expo *exp, ofnode node);
/**
* bootflow_menu_run() - Create and run a menu of available bootflows
*
* @std: Bootstd information
* @text_mode: Uses a text-based menu suitable for a serial port
* @bflowp: Returns chosen bootflow (set to NULL if nothing is chosen)
* @return 0 if an option was chosen, -EAGAIN if nothing was chosen, -ve on
* error
*/
int bootflow_menu_run(struct bootstd_priv *std, bool text_mode,
struct bootflow **bflowp);
#endif