tests/Makefile.in

# Makefile.in generated by automake 1.14 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2013 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Copyright (C) 2000-2012 Free Software Foundation, Inc.

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# Freeze M4 files.

# Copyright (C) 2002, 2004, 2006-2012 Free Software Foundation, Inc.

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

VPATH = @srcdir@
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/../lib/freeze.mk $(srcdir)/Makefile.in \
	$(srcdir)/Makefile.am $(srcdir)/atlocal.in
subdir = tests
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
	$(top_srcdir)/m4/m4.m4 $(top_srcdir)/m4/make-case.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES = atlocal
CONFIG_CLEAN_VPATH_FILES =
SCRIPTS = $(noinst_SCRIPTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EMACS = @EMACS@
EMACSLOADPATH = @EMACSLOADPATH@
EXPR = @EXPR@
GREP = @GREP@
HELP2MAN = @HELP2MAN@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
M4 = @M4@
M4_DEBUGFILE = @M4_DEBUGFILE@
M4_GNU = @M4_GNU@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PERL_FLOCK = @PERL_FLOCK@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TEST_EMACS = @TEST_EMACS@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_cv_dir_trailing_space = @ac_cv_dir_trailing_space@
ac_cv_sh_n_works = @ac_cv_sh_n_works@
ac_cv_unsupported_fs_chars = @ac_cv_unsupported_fs_chars@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
lispdir = @lispdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@

# We don't actually distribute the built testsuite or package.m4, since one
# only needs m4 to build them, and m4 is required to install Autoconf.
# But if you are borrowing from this file for setting up autotest in your
# project, remember to distribute both testsuite and package.m4.
EXTRA_DIST = $(TESTSUITE_AT) local.at mktests.sh atlocal.in wrapper.as \
	statesave.m4 mktests.stamp

# Running the uninstalled scripts.  Build them upon `all', for the manpages.
noinst_SCRIPTS = $(wrappers)
DISTCLEANFILES = atconfig atlocal $(TESTSUITE)
MAINTAINERCLEANFILES = Makefile.in $(TESTSUITE_GENERATED_AT) \
	mktests.stamp
SUFFIXES = .m4 .m4f
AUTOM4TE_CFG = $(top_builddir)/lib/autom4te.cfg

# Do not use AUTOM4TE here, since maint.mk (my-distcheck)
# checks if we are independent of Autoconf by defining AUTOM4TE (and
# others) to `false'.  Autoconf provides autom4te, so that doesn't
# apply to us.
MY_AUTOM4TE = \
	autom4te_perllibdir='$(top_srcdir)'/lib					\
	AUTOM4TE_CFG='$(AUTOM4TE_CFG)'         $(top_builddir)/bin/autom4te	\
		-B '$(top_builddir)'/lib -B '$(top_srcdir)'/lib        # keep ` '


# Factor the dependencies between all the frozen files.
# Some day we should explain to Automake how to use autom4te to compute
# the dependencies...
src_libdir = $(top_srcdir)/lib
build_libdir = $(top_builddir)/lib
m4f_dependencies = $(top_builddir)/bin/autom4te $(AUTOM4TE_CFG)
m4sugar_m4f_dependencies = \
	$(m4f_dependencies)			\
	$(src_libdir)/m4sugar/m4sugar.m4	\
	$(build_libdir)/m4sugar/version.m4

m4sh_m4f_dependencies = \
	$(m4sugar_m4f_dependencies)		\
	$(src_libdir)/m4sugar/m4sh.m4

autotest_m4f_dependencies = \
	$(m4sh_m4f_dependencies)		\
	$(src_libdir)/autotest/autotest.m4	\
	$(src_libdir)/autotest/general.m4	\
	$(src_libdir)/autotest/specific.m4

autoconf_m4f_dependencies = \
	$(m4sh_m4f_dependencies)		\
	$(src_libdir)/autoconf/autoscan.m4	\
	$(src_libdir)/autoconf/general.m4	\
	$(src_libdir)/autoconf/autoheader.m4	\
	$(src_libdir)/autoconf/autoupdate.m4	\
	$(src_libdir)/autoconf/autotest.m4	\
	$(src_libdir)/autoconf/status.m4	\
	$(src_libdir)/autoconf/oldnames.m4	\
	$(src_libdir)/autoconf/specific.m4	\
	$(src_libdir)/autoconf/lang.m4		\
	$(src_libdir)/autoconf/c.m4		\
	$(src_libdir)/autoconf/fortran.m4	\
	$(src_libdir)/autoconf/erlang.m4	\
	$(src_libdir)/autoconf/go.m4		\
	$(src_libdir)/autoconf/functions.m4	\
	$(src_libdir)/autoconf/headers.m4	\
	$(src_libdir)/autoconf/types.m4		\
	$(src_libdir)/autoconf/libs.m4		\
	$(src_libdir)/autoconf/programs.m4	\
	$(src_libdir)/autoconf/autoconf.m4

ETAGS_FOR_M4 = \
  --lang=none \
  --regex='/\(m4_define\|define\)(\[\([^]]*\)\]/\2/'

ETAGS_FOR_M4SUGAR = \
  $(ETAGS_FOR_M4) \
  --regex='/m4_defun(\[\([^]]*\)\]/\1/'

ETAGS_FOR_AUTOCONF = \
  $(ETAGS_FOR_M4SUGAR) \
  --regex='/\(A[CU]_DEFUN\|AU_ALIAS\)(\[\([^]]*\)\]/\2/' \
  --regex='/AN_\(FUNCTION\|HEADER\|IDENTIFIER\|LIBRARY\|MAKEVAR\|PROGRAM\)(\[\([^]]*\)\]/\2/'

wrappers = autoconf autoheader autom4te autoreconf autoscan autoupdate ifnames

# The hairy heredoc is more robust than using echo.
CLEANFILES = wrapper.in $(wrappers) package.m4 mktests.tmp expr
edit = sed \
	-e 's|@wrap_program[@]|$@|g' \
	-e 's|@abs_top_srcdir[@]|@abs_top_srcdir@|g' \
	-e 's|@abs_top_builddir[@]|@abs_top_builddir@|g' \
	-e "s|@configure_input[@]|Generated from $$input.|g"

TESTSUITE_GENERATED_AT = \
	$(srcdir)/aclang.at \
	$(srcdir)/acc.at \
	$(srcdir)/acfortran.at \
	$(srcdir)/acgo.at \
	$(srcdir)/acgeneral.at \
	$(srcdir)/acstatus.at \
	$(srcdir)/acautoheader.at \
	$(srcdir)/acautoupdate.at \
	$(srcdir)/acspecific.at \
	$(srcdir)/acfunctions.at \
	$(srcdir)/acheaders.at \
	$(srcdir)/actypes.at \
	$(srcdir)/aclibs.at \
	$(srcdir)/acprograms.at

TESTSUITE_HAND_AT = \
	suite.at \
	m4sugar.at m4sh.at autotest.at \
	base.at tools.at torture.at \
	compile.at c.at erlang.at fortran.at go.at \
	semantics.at \
	autoscan.at \
	foreign.at

TESTSUITE_AT = $(TESTSUITE_GENERATED_AT) $(TESTSUITE_HAND_AT)
TESTSUITE = ./testsuite

# Run the non installed autom4te.
# Don't use AUTOM4TE since `make alpha' makes it unavailable although
# we are allowed to use it (since we ship it).
AUTOTEST = $(MY_AUTOM4TE) --language=autotest

# Avoid a race condition that would make parallel "distclean" fail.
# The rule in clean-local tests for existence of $(TESTSUITE), and
# if found, attempts to run it.  But the distclean-generic rule may
# be running in parallel, and it removes $(DISTCLEANFILES) which
# includes $(TESTSUITE).  This is the Automake rule, plus our
# dependency, and we silence the warning from 'automake -Wall' by
# hiding the dependency behind a variable.
# TODO - fix this if newer automake accommodates the dependency.
distclean_generic = distclean-generic

# The files which contain macros we check for syntax.  Use $(top_srcdir)
# for the benefit of non-GNU make.  Fix the names in the rule below
# where we `cd' to $srcdir.
autoconfdir = $(top_srcdir)/lib/autoconf
AUTOCONF_FILES = $(autoconfdir)/general.m4 \
		 $(autoconfdir)/status.m4 \
		 $(autoconfdir)/autoheader.m4 \
		 $(autoconfdir)/autoupdate.m4 \
		 $(autoconfdir)/specific.m4 \
		 $(autoconfdir)/functions.m4 \
		 $(autoconfdir)/lang.m4 \
		 $(autoconfdir)/c.m4 \
		 $(autoconfdir)/erlang.m4 \
		 $(autoconfdir)/fortran.m4 \
		 $(autoconfdir)/go.m4 \
		 $(autoconfdir)/headers.m4 \
		 $(autoconfdir)/libs.m4 \
		 $(autoconfdir)/types.m4 \
		 $(autoconfdir)/programs.m4

all: all-am

.SUFFIXES:
.SUFFIXES: .m4 .m4f
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(srcdir)/../lib/freeze.mk $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu tests/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;
$(srcdir)/../lib/freeze.mk:

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
atlocal: $(top_builddir)/config.status $(srcdir)/atlocal.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
tags TAGS:

ctags CTAGS:

cscope cscopelist:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-local
check: check-am
all-am: Makefile $(SCRIPTS)
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-generic clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am: installcheck-local

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: check-am install-am install-strip

.PHONY: all all-am check check-am check-local clean clean-generic \
	clean-local cscopelist-am ctags-am distclean distclean-generic \
	distdir dvi dvi-am html html-am info info-am install \
	install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installcheck-local \
	installdirs maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags-am \
	uninstall uninstall-am

$(AUTOM4TE_CFG): $(top_srcdir)/lib/autom4te.in
	cd $(top_builddir)/lib && $(MAKE) $(AM_MAKEFLAGS) autom4te.cfg

# When processing the file with diversion disabled, there must be no
# output but comments and empty lines.
# If freezing produces output, something went wrong: a bad `divert',
# or an improper paren etc.
# It may happen that the output does not end with an end of line, hence
# force an end of line when reporting errors.
.m4.m4f:
	$(MY_AUTOM4TE)				\
		--language=$*			\
		--freeze			\
		--output=$@

# For parallel builds.
$(build_libdir)/m4sugar/version.m4:
	cd $(build_libdir)/m4sugar && $(MAKE) $(AM_MAKEFLAGS) version.m4

check-forbidden-patterns:
	@if (cd $(srcdir) && \
	    $(GREP) $(forbidden_patterns) $(forbidden_patterns_files)) \
	    >forbidden.log; then \
	  echo "ERROR: forbidden patterns were found:" >&2; \
	  sed "s|^|$*.m4: |" <forbidden.log >&2; \
	  echo >&2; \
	  exit 1; \
	else \
	  rm -f forbidden.log; \
	fi

# Import the dependencies on Autotest and M4sh.

# The `:;' works around a redirected compound command bash exit status bug.
package.m4: Makefile
	:;{ \
	  echo '# Signature of the current package.' && \
	  echo 'm4_define([AT_PACKAGE_NAME],      [$(PACKAGE_NAME)])' && \
	  echo 'm4_define([AT_PACKAGE_TARNAME],   [$(PACKAGE_TARNAME)])' && \
	  echo 'm4_define([AT_PACKAGE_VERSION],   [$(PACKAGE_VERSION)])' && \
	  echo 'm4_define([AT_PACKAGE_STRING],    [$(PACKAGE_STRING)])' && \
	  echo 'm4_define([AT_PACKAGE_BUGREPORT], [$(PACKAGE_BUGREPORT)])' && \
	  echo 'm4_define([AT_PACKAGE_URL],       [$(PACKAGE_URL)])'; \
	} > $@-t
	mv $@-t $@

wrapper.in: $(srcdir)/wrapper.as $(m4sh_m4f_dependencies)
	$(MY_AUTOM4TE) --language=M4sh $(srcdir)/wrapper.as -o $@

$(wrappers): wrapper.in
	rm -f $@ $@.tmp
	input=wrapper.in; \
	$(edit) wrapper.in >$@.tmp
	chmod +x $@.tmp
	chmod a-w $@.tmp
	mv -f $@.tmp $@
$(TESTSUITE): package.m4 \
	      local.at \
	      $(TESTSUITE_AT) \
	      $(autotest_m4f_dependencies)
	cd $(top_builddir)/lib/autotest && $(MAKE) $(AM_MAKEFLAGS) autotest.m4f
	$(AUTOTEST) -I . -I $(srcdir) suite.at -o $@.tmp
	mv $@.tmp $@

atconfig: $(top_builddir)/config.status
	cd $(top_builddir) && ./config.status tests/$@
$(distclean_generic): clean-local

clean-local:
	test ! -f $(TESTSUITE) || $(SHELL) $(TESTSUITE) --clean
	rm -f *.tmp
	rm -f -r autom4te.cache

check-local: atconfig atlocal $(TESTSUITE)
	$(SHELL) $(TESTSUITE) $(TESTSUITEFLAGS)

# Run the test suite on the *installed* tree.
installcheck-local: atconfig atlocal $(TESTSUITE)
	$(SHELL) $(TESTSUITE) AUTOTEST_PATH="$(bindir)" $(TESTSUITEFLAGS)

$(TESTSUITE_GENERATED_AT): mktests.stamp
	@if test -f $@; then :; else \
	  rm -f mktests.stamp; \
	  $(MAKE) $(AM_MAKEFLAGS) mktests.stamp; \
	fi

mktests.stamp : mktests.sh $(AUTOCONF_FILES)
	@rm -f mktests.tmp
	@touch mktests.tmp
	cd $(srcdir) && ./mktests.sh \
	  `echo " "$(AUTOCONF_FILES) | sed 's, [^ ]*/, ../lib/autoconf/,g'`
	@mv -f mktests.tmp $@

# These cannot be run in parallel.
maintainer-check:
	$(MAKE) $(AM_MAKEFLAGS) maintainer-check-posix
	$(MAKE) $(AM_MAKEFLAGS) maintainer-check-c++
expr:
	:;{					\
	  echo '#! $(SHELL)';			\
	  echo 'result=`$(EXPR) "$$@"`';	\
	  echo 'estatus=$$?';			\
	  echo 'cat <<EOF';			\
	  echo '$${result:-0}';			\
	  echo 'EOF';				\
	  echo 'exit $$estatus';		\
	} > $@-t
	chmod +x $@-t
	mv $@-t $@

# Try the test suite with more severe environments.
maintainer-check-posix: expr
	POSIXLY_CORRECT=yes $(MAKE) $(AM_MAKEFLAGS) check
	rm expr

# Try using G++ as a C compiler.
maintainer-check-c++:
	CC=g++ $(MAKE) $(AM_MAKEFLAGS) check

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: