| 2009-12-17 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * mn10300/Makefile.in: Add mkdir call to make installation |
| directory when installing. |
| |
| 2009-12-16 Conny Marco Menebrocker <c-m-m@gmx.de> |
| |
| * xc16x/Makefile.in: Remove extraneous stuff |
| brought in by copy. |
| * xc16x/configure.in: Ditto. |
| * xc16x/configure: Regenerated. |
| |
| 2009-12-10 Conny Marco Menebrocker <c-m-m@gmx.de> |
| |
| * configure.in: Add xc16x support. |
| * configure: Regenerated. |
| * xc16x/Makefile.in: New file for xc16x port. |
| * xc16x/aclocal.m4: Ditto. |
| * xc16x/close.S: Ditto. |
| * xc16x/configure: Ditto. |
| * xc16x/configure.in: Ditto. |
| * xc16x/create.c: Ditto. |
| * xc16x/crt0.S: Ditto. |
| * xc16x/fstat.S: Ditto. |
| * xc16x/getchar1.c: Ditto. |
| * xc16x/isatty.c: Ditto. |
| * xc16x/lseek.c: Ditto. |
| * xc16x/mem-layout.c: Ditto. |
| * xc16x/misc.c: Ditto. |
| * xc16x/open.c: Ditto. |
| * xc16x/read.c: Ditto. |
| * xc16x/sbrk.c: Ditto. |
| * xc16x/syscalls.c: Ditto. |
| * xc16x/trap_handle.c: Ditto. |
| * xc16x/write.c: Ditto. |
| * xc16x/sys/syscall.h: Ditto. |
| |
| 2009-11-25 DJ Delorie <dj@redhat.com> |
| |
| * rx/rx.ld: Place .sbss properly. |
| * rx/rx-sim.ld: Likewise. |
| |
| 2009-10-26 DJ Delorie <dj@redhat.com> |
| |
| * configure.in: Add support for RX sub-directory. |
| * configure: Regenerate. |
| * rx: New directory. |
| * rx/*: New files to support RX architecture. |
| |
| 2009-10-26 Nick Clifton <nickc@redhat.com> |
| |
| * arm/linux-syscalls0.S (SYSCALL0, SYSCALL3, SYSCALL6, SYSCALL4): |
| Delete Thumb definitions - the ARM versions work correctly in |
| Thumb mode. |
| |
| 2009-10-08 Jie Zhang <jie.zhang@analog.com> |
| |
| * bfin/Makefile.in (basiccrt.o, basiccrts.o): Use |
| -mcpu=bf532-any for the default multilib. |
| |
| 2009-09-28 Michael Eager <eager@eagercon.com> |
| |
| * configure.in: Add microblaze-*-*. |
| * configure: Add microblaze-*-* (not regenerated.) |
| * microblaze: NEW microblaze target directory. |
| * microblaze/configure.in: NEW. |
| * microblaze/configure: Generate. |
| * microblaze/Makefile.in: NEW. |
| * microblaze/{crt0.S, crt1.S, crt2.S, crt3.S, crt4.S, crtinit.S}: NEW. |
| * microblaze/{pgcrtinit.S, _program_clean.S, _program_init.S, |
| sbrk.c, sim-crtinit.S, sim-pgcrtinit.S, timer.c, _exception_handler.S, |
| _hw_exception_handler.S, _interrupt_handler.S, xil_malloc.c, |
| nnxil_printf.c, xil_sbrk.c: NEW. |
| * microblaze/xilinx.ld: NEW. |
| |
| 2009-09-21 Ken Werner <ken.werner@de.ibm.com> |
| |
| * spu/getpagesize.c: Align getpagesize implementation to POSIX |
| |
| 2009-09-16 Mike Frysinger <michael.frysinger@analog.com> |
| |
| * bfin/include/cdefBF512.h, bfin/include/cdefBF514.h, |
| bfin/include/cdefBF516.h, bfin/include/cdefBF518.h, |
| bfin/include/cdefBF51x_base.h, bfin/include/cdefBF523.h, |
| bfin/include/cdefBF524.h, bfin/include/cdefBF526.h, |
| bfin/include/cdefBF542M.h, bfin/include/cdefBF544M.h, |
| bfin/include/cdefBF547M.h, bfin/include/cdefBF548M.h, |
| bfin/include/cdefBF549M.h, bfin/include/defBF512.h, |
| bfin/include/defBF514.h, bfin/include/defBF516.h, |
| bfin/include/defBF518.h, bfin/include/defBF51x_base.h, |
| bfin/include/defBF523.h, bfin/include/defBF524.h, |
| bfin/include/defBF526.h, bfin/include/defBF542M.h, |
| bfin/include/defBF544M.h, bfin/include/defBF547M.h, |
| bfin/include/defBF548M.h, bfin/include/defBF549M.h: |
| New file. |
| * bfin/include/ccblkfn.h, bfin/include/cdefBF525.h, |
| bfin/include/cdefBF527.h, bfin/include/cdefBF52x_base.h, |
| bfin/include/cdefBF532.h, bfin/include/cdefBF534.h, |
| bfin/include/cdefBF535.h, bfin/include/cdefBF538.h, |
| bfin/include/cdefBF539.h, bfin/include/cdefBF542.h, |
| bfin/include/cdefBF544.h, bfin/include/cdefBF547.h, |
| bfin/include/cdefBF548.h, bfin/include/cdefBF549.h, |
| bfin/include/cdefBF54x_base.h, bfin/include/cdefBF561.h, |
| bfin/include/cdefblackfin.h, bfin/include/cdef_LPBlackfin.h, |
| bfin/include/cplb.h, bfin/include/defBF527.h, |
| bfin/include/defBF52x_base.h, bfin/include/defBF532.h, |
| bfin/include/defBF534.h, bfin/include/defBF535.h, |
| bfin/include/defBF537.h, bfin/include/defBF538.h, |
| bfin/include/defBF539.h, bfin/include/defBF542.h, |
| bfin/include/defBF544.h, bfin/include/defBF547.h, |
| bfin/include/defBF548.h, bfin/include/defBF549.h, |
| bfin/include/defBF54x_base.h, bfin/include/defBF561.h, |
| bfin/include/defblackfin.h, bfin/include/def_LPBlackfin.h, |
| bfin/include/sys/_adi_platform.h, |
| bfin/include/sys/anomaly_macros_rtl.h, |
| bfin/include/sys/exception.h, bfin/include/sysreg.h: |
| Update to Visual DSP 5.0 Update 6. |
| |
| 2009-09-16 Mike Frysinger <michael.frysinger@analog.com> |
| |
| * bfin/Makefile.in (BOARD_SCRIPTS): Add bf512.ld, bf514.ld, |
| and bf516.ld, bf518.ld. |
| * bfin/bf512.ld: New file. |
| * bfin/bf514.ld: Likewise. |
| * bfin/bf516.ld: Likewise. |
| * bfin/bf518.ld: Likewise |
| |
| 2009-09-16 Jie Zhang <jie.zhang@analog.com> |
| |
| * bfin/*.ld: Fix typos in comments. |
| |
| 2009-09-08 Bernd Schmidt <bernd.schmidt@analog.com> |
| |
| * bfin/include/ccblkfn.h: New file. |
| |
| 2009-09-08 Mike Frysinger <michael.frysinger@analog.com> |
| |
| * bfin/include/sys/_adi_platform.h: Convert __ASSEMBLY__ to |
| __ASSEMBLER__. |
| * bfin/include/sys/pll.h: Likewise |
| |
| 2009-09-08 Jie Zhang <jie.zhang@analog.com> |
| |
| * bfin/Makefile.in (basiccrt.o, basiccrts.o): Don't use |
| -mcpu=bf532-any for the default multilib. |
| |
| 2009-07-28 DJ Delorie <dj@redhat.com> |
| |
| * mep/gmap_default.ld: Add linkonce sections for .vtext. |
| * mep/default.ld: Likewise. |
| * mep/fmax.ld: Likewise. |
| * mep/simple.ld: Likewise. |
| |
| 2009-07-14 DJ Delorie <dj@redhat.com> |
| |
| * mep/syscalls.S (sysret): Maintain 16-byte stack alignment. |
| |
| 2009-07-08 DJ Delorie <dj@redhat.com> |
| |
| * m32c/sbrk.c (sbrk): Change to take ptrdiff_t, not int. |
| |
| 2009-07-01 Anthony Green <green@moxielogic.com> |
| |
| * moxie/crt0.S (_start): Clear BSS at startup. Register _fini() |
| with atexit(). |
| * moxie/sim-open.S: Fix comment. |
| |
| 2009-06-19 Joseph Myers <joseph@codesourcery.com> |
| |
| * Makefile.in (html, pdf): New. |
| * doc/Makefile.in (html, pdf, porting.pdf, porting.html): New. |
| * doc/porting.texi: Fix section structure. |
| |
| 2009-06-17 Michael Eager <eager@eagercon.com> |
| |
| * rs6000/Makefile.in: Add xilinx support. |
| * rs6000/xil-crt0.s: New crt0 file for powerpc-xilinx-eabi. |
| * rs6000/xilinx.ld: New file. |
| * rs6000/xilinx440.ld: Ditto. |
| |
| 2009-05-13 Ken Werner <ken.werner@de.ibm.com> |
| |
| * configure.in: Introduce config_libnosys flag which defaults to true. |
| * configure: Regenerate. |
| |
| 2009-05-13 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * spu/crtn.S: Add dummy to ensure nothing gets linked at address 0. |
| * spu/crti.S: Remove nop. |
| |
| 2009-05-08 Nick Clifton <nickc@redhat.com> |
| |
| * mn10300/sim.ld: Add missing section names such as .bss.* |
| .text.*, etc. General tidy up. |
| |
| 2009-05-07 Ken Werner <ken.werner@de.ibm.com> |
| |
| * spu/configure.in: Fix multilib support. |
| * spu/configure: Regenerate. |
| * spu/Makefile.in: Add CFLAGS_FOR_TARGET. |
| |
| 2009-04-29 Anthony Green <green@moxielogic.com> |
| |
| * moxie/moxie-elf-common.ld: Move default stack out to accommodate |
| large GCC tests. |
| |
| 2009-04-22 Anthony Green <green@moxielogic.com> |
| |
| * configure.in: Add moxie support. |
| * configure: Regenerate. |
| * moxie/aclocal.m4, moxie/configure, moxie/configure.in, |
| moxie/crt0.S, moxie/fstat.c, moxie/getpid.c, isatty.c, |
| moxie/kill.c, moxie/Makefile.in, moxie/moxie-elf-common.ld, |
| moxie/print.c, moxie/putnum.c, moxie/qemu.ld, moxie/qemu-time.c, |
| moxie/qemu-write.c, moxie/sbrk.c, moxie/sim-close.S, |
| moxie/sim-exit.S, |
| moxie/sim-inbyte.c, moxie/sim.ld, moxie/sim-lseek.c, |
| moxie/sim-lseek.S, moxie/sim-open.S, moxie/sim-read.S, moxie/sim-time.c, |
| moxie/sim-unlink.S, moxie/sim-write.S, moxie/stat.c: New files. |
| |
| 2009-04-22 DJ Delorie <dj@redhat.com> |
| |
| * mep/sim-crt0.S (_start): Fix typo. |
| |
| 2009-04-21 DJ Delorie <dj@redhat.com> |
| |
| * mep/Makefile.in (SCRIPTS): Update to new config. |
| * mep/default.ld: New. |
| * mep/gmap_default.ld: Change default endian to little. |
| * mep/sim-crt0.S: Maintain 8-byte stack alignment. |
| * mep/sim-crtn.S: Likewise. |
| |
| 2009-04-03 Ken Werner <ken.werner@de.ibm.com> |
| |
| * spu/Makefile.in: Add new files. |
| * spu/times.c: New File. |
| * spu/getitimer.c: Likewise. |
| * spu/setitimer.c: Likewise. |
| |
| 2009-04-03 Ken Werner <ken.werner@de.ibm.com> |
| |
| * spu/Makefile.in: Add linux_getpid.o and linux_gettid.o. |
| * spu/linux_getpid.c: New file. |
| * spu/linux_gettid.c: New file. |
| |
| 2009-04-03 Ken Werner <ken.werner@de.ibm.com> |
| |
| * spu/crt0.S (_start): Place spu_id in the first agument register. |
| |
| 2009-03-16 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * m32r/m32r-stub.c: Replace with one from newer version of gdb. |
| |
| 2009-01-07 Ben Elliston <bje@au.ibm.com> |
| |
| * Makefile.in (all): Add `+' to the command line so that the |
| command is always treated as $(MAKE). |
| * doc/Makefile.in (datarootdir): Define. |
| |
| 2008-12-17 Jon Beniston <jon@beniston.com> |
| |
| * README: Add description of lm32 directory. |
| * configure.in: Add lm32 target. |
| * configure: Regenerated. |
| * libnosys/configure.in: Add lm32 target. |
| * libnosys/configure: Regenerated. |
| * lm32: New directory. |
| * lm32/aclocal.m4: New file. |
| * lm32/Makefile.in: New file. |
| * lm32/configure.in: New file. |
| * lm32/configure: New file. |
| * lm32/crt0.S: New file. |
| * lm32/isatty.c: New file. |
| * lm32/scall.S: New file. |
| * lm32/sim.ld: New file. |
| |
| 2008-12-11 Ken Werner <ken.werner@de.ibm.com> |
| |
| * spu/crt0.S: Call __monstartup if profiling is enabled. |
| * spu/Makefile.in: Add gcrt1.o gcrt2.o. |
| |
| 2008-12-06 Adam Nemet <anemet@caviumnetworks.com> |
| |
| * mips/idt32.ld: Set arch to mips:isa32r2 from mips:isa32. Update |
| comment. |
| |
| 2008-12-05 Adam Nemet <anemet@caviumnetworks.com> |
| |
| * mips/idt64.ld: Set arch to mips:isa64r2 from mips:isa64. Update |
| comment. |
| |
| 2008-11-20 Ken Werner <ken.werner@de.ibm.com> |
| Patrick Mansfield <patmans@us.ibm.com> |
| Joel Schopp <jschopp@austin.ibm.com> |
| |
| * spu/Makefile.in: Add new files. |
| * spu/jsre.h: Add JSRE_MMAP, JSRE_MREMAP, JSRE_MSYNC and |
| JSRE_MUNMAP opcodes. |
| * spu/mmap_eaddr.c: New File. |
| * spu/mremap_eaddr.c: Likewise. |
| * spu/msync_eaddr.c: Likewise. |
| * spu/munmap_eaddr.c: Likewise. |
| |
| 2008-11-17 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * m32r/Makefile.in: Add building m32r-stub.o from local copy instead |
| of up and over in gdb. |
| * m32r/m32r-stub.c: New file copied from gdb. |
| |
| 2008-10-06 Bill Tompkins <bill+newlib@key-square.com> |
| |
| * arm/crt0.S: Fix calling hardware_init_hook() or software_init_hook() |
| under thumb and thumb2. |
| |
| 2008-09-24 DJ Delorie <dj@redhat.com> |
| |
| * m32c/varvects.S: New. |
| * m32c/varvects.h: New. |
| * m32c/sample.c: New. |
| * m32c/Makefile.in: Add m32cgloss library support. |
| * m32c/crt0.S: Tweaks to support interrupts by default. |
| * m32c/m32c.tmpl: Likewise. |
| |
| 2008-09-10 Ken Werner <ken.werner@de.ibm.com> |
| |
| * spu/dirfuncs.c: Avoid warnings. |
| * spu/kill.c: Likewise. |
| |
| 2008-09-04 Ken Werner <ken.werner@de.ibm.com> |
| |
| * spu/Makefile.in: Fix missing linux_syscalls.o. |
| * spu/linux_syscalls.c: Remove extraneous "3D" sequences. |
| |
| 2008-08-14 Jie Zhang <jie.zhang@analog.com> |
| |
| * bfin/Makefile.in: (top_srcdir): Define. |
| (mkinstalldirs): Define. |
| (BOARD_SCRIPTS): Define. |
| (BOARD_LDFLAGS): Define. |
| (BOARD_BSP): Define. |
| (BOARD_CRT0S): Define. |
| (BOARD_OBJS): Define. |
| (BOARD_TEST): Define. |
| (BOARD_INSTALL): Define. |
| (INCLUDES): Add -I$(srcdir)/include. |
| (all): Add ${BOARD_CRT0S} and ${BOARD_BSP}. |
| (.c.S): Remove target. |
| (crt0.o): New target. |
| (basiccrt.o): Likewise. |
| (basiccrtb.o): Likewise. |
| (basiccrts.o): Likewise. |
| (basiccrt561.o, basiccrt561s.o, basiccrt561b.o): Likewise |
| (clean mostlyclean): Remove ${BOARD_BSP}. |
| (install): Depend on ${BOARD_INSTALL}. |
| (install-sim): Reformat. |
| (install-board): New target. |
| * bfin/basiccrt.S: Remove useless __ADSPBF561_COREB__ in |
| workaround code for 05000229. |
| * bfin/syscalls.c (do_syscall): Use `EXCPT 0' instead of |
| `RAISE 0' for syscall. |
| * bfin/basiccrt.S: New file. |
| * bfin/bf5*ld: New file. |
| * bfin/bfin-common-mc.ld: New file. |
| * bfin/bfin-common-sc.ld: New file. |
| * bfin/include/blackfin.h: New file. |
| * bfin/include/cdefBF5*.h: New file. |
| * bfin/include/cdef_LPBlackfin.h: New file. |
| * bfin/include/cdefblackfin.h: New file. |
| * bfin/include/cplb.h: New file. |
| * bfin/include/cplbtab.h: New file. |
| * bfin/include/defBF5*.h: New files. |
| * bfin/include/def_LPBlackfin.h: New files. |
| * bfin/include/defblackfin.h: New file. |
| * bfin/include/sys/_adi_platform.h: New file. |
| * bfin/include/sys/anomaly_macros_rtl.h: New file. |
| * bfin/include/sys/excause.h: New file. |
| * bfin/include/sys/exception.h: New file. |
| * bfin/include/sys/mc_typedef.h: New file. |
| * bfin/include/sys/platform.h: New file. |
| * bfin/include/sys/pll.h: New file. |
| * bfin/include/sysreg.h: New file. |
| * libnosys/configure.in (MISSING_SYSCALL_NAMES): Don't define |
| for bfin. |
| * libnosys/configure: Regenerate. |
| |
| 2008-07-17 Ken Werner <ken.werner@de.ibm.com> |
| |
| * spu/syscalls.c: Check and set the errno value. |
| |
| 2008-06-17 Ken Werner <ken.werner@de.ibm.com> |
| |
| * spu/Makefile.in: Add new file. |
| * spu/linux_syscalls.c: New file to add Linux syscall support. |
| |
| 2008-06-16 Corrin Meyer <cjmeyer@gmail.com> |
| |
| * m68k/cf-crt1.c[__mcf_family_m1qe]: Don't access CACR. |
| |
| 2008-05-20 Nick Clifton <nickc@redhat.com> |
| |
| * iq2000/crt0.S (__dso_handle): Define (weak). |
| * frv/crt0.S (__dso_handle): Define (weak). |
| * mn10300/crt0.S (___dso_handle): Define (weak). |
| |
| 2008-05-05 Ken Werner <ken.werner@de.ibm.com> |
| |
| * spu/readlink.c: Align readlink implementation to POSIX. |
| |
| 2008-04-25 Nick Clifton <nickc@redhat.com> |
| |
| * arm/crt0.S: Allow assembly under ARMv7 ISA. Support for |
| initializing stack pointers for interrupt modes is still pending. |
| |
| 2008-04-14 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/sbrk.c: Remove "extern int errno", use whatever is supplied |
| by sys/errno.h. |
| |
| 2008-04-04 DJ Delorie <dj@redhat.com> |
| |
| * hp74x/configure: Regenerate with autoconf 2.61. |
| * fr30/configure: Regenerate with autoconf 2.61. |
| * mips/configure: Regenerate with autoconf 2.61. |
| * xstormy16/configure: Regenerate with autoconf 2.61. |
| * rs6000/configure: Regenerate with autoconf 2.61. |
| * d30v/configure: Regenerate with autoconf 2.61. |
| * i386/configure: Regenerate with autoconf 2.61. |
| * configure: Regenerate with autoconf 2.61. |
| * wince/configure: Regenerate with autoconf 2.61. |
| * pa/configure: Regenerate with autoconf 2.61. |
| * m32r/configure: Regenerate with autoconf 2.61. |
| * mn10200/configure: Regenerate with autoconf 2.61. |
| * iq2000/configure: Regenerate with autoconf 2.61. |
| * cris/configure: Regenerate with autoconf 2.61. |
| * m68k/configure: Regenerate with autoconf 2.61. |
| * spu/configure: Regenerate with autoconf 2.61. |
| * m32c/configure: Regenerate with autoconf 2.61. |
| * mn10300/configure: Regenerate with autoconf 2.61. |
| * i960/configure: Regenerate with autoconf 2.61. |
| * arm/configure: Regenerate with autoconf 2.61. |
| * libnosys/configure: Regenerate with autoconf 2.61. |
| * m68hc11/configure: Regenerate with autoconf 2.61. |
| * bfin/configure: Regenerate with autoconf 2.61. |
| * crx/configure: Regenerate with autoconf 2.61. |
| * mt/configure: Regenerate with autoconf 2.61. |
| * sparc/configure: Regenerate with autoconf 2.61. |
| * sparc/libsys/configure: Regenerate with autoconf 2.61. |
| * mcore/configure: Regenerate with autoconf 2.61. |
| * mep/configure: Regenerate with autoconf 2.61. |
| * frv/configure: Regenerate with autoconf 2.61. |
| * doc/configure: Regenerate with autoconf 2.61. |
| |
| 2008-01-10 DJ Delorie <dj@redhat.com> |
| |
| * m32c/exit.S (__exit): preserve both argument registers. |
| |
| 2008-01-03 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * arm/redboot-syscalls.c: Consistently supply _isatty if syscalls |
| dir is used in newlib. |
| * bfin/syscalls.c: Ditto. |
| * cris/gensyscalls: Ditto. |
| * fr30/syscalls.c: Ditto. |
| * frv/isatty.c: Ditto. |
| * iq2000/isatty.c: Ditto. |
| * libnosys/isatty.c: Ditto. |
| * m32r/isatty.c: Ditto. |
| * mn10200/isatty.c: Ditto. |
| * mn10300/isatty.c: Ditto. |
| * xstormy16/isatty.c: New file with _isatty function. |
| |
| 2007-12-01 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/Makefile.in (crt0.o): Add CFLAGS when compiling crt0.S. |
| |
| 2007-11-06 Dave Brolley <brolley@redhat.com> |
| |
| * syscall.h (SYS_reconfig): New macro. |
| |
| 2007-10-11 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * spu/crt0.S: Fix so element one of register one is correctly set |
| when compiled with -mstdmain and -fstack-check. |
| |
| 2007-10-02 Markus Deuling <deuling@de.ibm.com> |
| |
| * spu/crt0.S: Initialize __ea_local_store (EA address of the LS) |
| via register 6. |
| |
| 2007-10-01 Markus Deuling <deuling@de.ibm.com> |
| |
| * spu/Makefile.in: add dependencies for crt files. |
| |
| 2007-10-01 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/sbrk.c: Use the current stack pointer value rather than the |
| maximum available memory to determine the amount of heap space |
| left. Without this change calling sbrk() can allocate space that |
| is currently in use on the stack. |
| |
| 2007-09-26 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/sched_yield.c: New file (missed on 2007-09-21). |
| |
| 2007-09-21 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/Makefile.in: Add new files. |
| * spu/jsre.h: Add JSRE_PREAD, JSRE_PWRITE, JSRE_READV, and |
| JSRE_WRITEV opcodes. |
| * spu/pread.c: New file to add pread via assist call. |
| * spu/pwrite.c: New file to add pwrite via assist call. |
| * spu/readv.c: New file to add readv via assist call. |
| * spu/writev.c: New file to add writev via assist call. |
| |
| 2007-09-21 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/jsre.h: Add JSRE_SCHED_YIELD, JSRE_UMASK, JSRE_UTIME, and |
| JSRE_UTIMES. |
| * spu/sched_yield.c: New file add sched_yield via assist call. |
| * spu/umask.c: New file add umask via assist call. |
| * spu/utime.c: New file add utime via assist call. |
| * spu/utimes.c: New file add utimes via assist call. |
| * spu/Makefile.in: Add new files. |
| |
| 2007-09-21 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/jsre.h: Add JSRE_SHM_OPEN and JSRE_SHM_UNLINK opcodes. |
| * spu/shm_open.c: New file to add shm_open via assist call. |
| * spu/shm_unlink.c: New file to add shm_unlink via assist call. |
| * spu/Makefile.in: Add shm_open.o and shm_unlink.o |
| |
| 2007-09-21 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/dirfuncs.c: New file, holds the opendir, closedir, readdir, |
| rewinddir, seekdir and telldir implementations. These are |
| grouped in one file so that we do not need a separate file for |
| the struct dirent and DIR allocation code. |
| * spu/jsre.h: Add JSRE_OPENDIR and other dir opcodes. |
| * spu/Makefile.in: Add dirfuncs.o. |
| |
| 2007-08-13 Carlos O'Donell <carlos@codesourcery.com> |
| |
| * arm/crt0.S: Remove '.set' for __stack, hardware_init_hook, |
| and software_init_hook. |
| |
| 2007-08-10 Carlos O'Donell <carlos@codesourcery.com> |
| |
| 2007-07-12 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * arm/syscalls.c (_stat): Use _close |
| |
| * arm/syscalls.c (struct poslog): Rename to... |
| (struct fdent): ... this. |
| (FILE_HANDLE_OFFSET): Remove. |
| (findslot): Return a struct fdent* if fd is valid, otherwise return NULL. |
| (newslot): New function. |
| (remap_handle): Remove. |
| (initialise_monitor_handles): Use stdout as fallback for stderr. |
| (wrap): Rename to... |
| (checkerror): ... this. |
| (_swiread): Use checkerror() for the return of SWI calls. Correct the use of r0. |
| (_read): Use findslot(). Return EBADF on bad handle. |
| (_swilseek): Call findslot(). Check for valid whence. Check for negative offset when using |
| SEEK_CUR, and check for overflow. Use checkerror(). Check *_Flen calls for errors. |
| (_swiwrite): Correct the use of r0. |
| (_write): Call findslot(). |
| (_swiopen): Call findslot(). Check for valid flags. Use checkerror(). Call newslot(). |
| Handle O_TRUNC, and O_WRONLY. Return index into openfiles[] for fd. |
| (_swiclose): Correct the use of r0. |
| (_close): Handle stderr == stdout case. Only reclaim handle if _swiclose succeeded. |
| (_getpid): Use __attribute__((unused)). |
| (_sbrk): Fix formatting. |
| (_swistat): New function. |
| (_stat): Call _swistat(). |
| (_fstat): Call _swistat(). |
| (_unlink): Correct the use of r0. |
| (isatty): Call finslot(). Correct the use of r0. |
| (_system): Call checkerror(). Correct the use of r0. |
| (_rename): Correct the use of r0. |
| |
| 2007-07-13 Kevin Buettner <kevinb@redhat.com> |
| |
| * mep/fmax.ld, mep/gmap_default.ld, mep/min.ld, mep/simple.ld (.gcc_except_table): Add pattern |
| for .gcc_except_table.*. |
| |
| 2007-07-06 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * arm/syscalls.c (gettimeofday): Change to POSIX signature |
| where second argument is passed as void *. |
| * bfin/syscalls.c (gettimeofday): Ditto. |
| * cris/gensyscalls (gettimeofday): Ditto. |
| * cris/linunistd.h (gettimeofday): Ditto. |
| * crx/time.c (gettimeofday): Ditto. |
| * frv/sim-time.c (gettimeofday): Ditto. |
| * i386/cygmon-salib.c (gettimeofday): Ditto. |
| * libnosys/gettod.c (gettimeofday): Ditto. |
| * m68k/io-gettimeofday.c (gettimeofday): Ditto. |
| * sparc/cygmon-salib.c (gettimeofday): Ditto. |
| * spu/gettimeofday.c (gettimeofday): Ditto. |
| |
| 2007-06-20 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/jsre.h: Add JSRE_MKSTEMP and JSRE_MKTEMP values. |
| * spu/mkstemp.c: New file to add mkstemp support via assist call. |
| * spu/mktemp.c: New file to add mktemp support via assist call. |
| * spu/Makefile.in: Add mkstemp.o and mktemp.o |
| |
| 2007-06-20 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/jsre.h: Add new JSRE opcodes. |
| * spu/dup2.c: New file to add dup2 support via assist call. |
| * spu/fdatasync.c: New file to add fdatasync support via assist call. |
| * spu/fsync.c: New file to add fsync support via assist call. |
| * spu/lockf.c: New file to add lockf support via assist call. |
| * spu/sync.c: New file to add sync support via assist call. |
| * spu/truncate.c: New file to add truncate support via assist call. |
| * spu/Makefile.in: Add new files. |
| |
| 2007-06-20 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/jsre.h: JSRE_LINK, JSRE_SYMLINK and JSRE_READLINK. |
| * spu/link.c: New file to add link support via an assist call. |
| * spu/readlink.c: New file to add readlink support via an assist call. |
| * spu/symlink.c: New file to add symlink support via an assist call. |
| * spu/Makefile.in: Add new files. |
| |
| 2007-06-20 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/jsre.h: Add JSRE_LSTAT. |
| * spu/lstat.c: New file add lstat support via an assist call. |
| * spu/conv_stat.c: New file, add common stat conversion code. |
| * spu/fstat.c: Use __conv_stat. |
| * spu/stat.c: Use __conv_stat. |
| * spu/Makefile.in: Add conv_stat.o and lstat.o. |
| |
| 2007-06-20 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/jsre.h: Add JSRE_GETCWD. |
| * spu/getcwd.c: New file, implement getcwd with help from an |
| assist call. |
| * spu/Makefile.in: Add getcwd. |
| |
| 2007-06-20 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/jsre.h: Add defines for new assist calls. |
| * spu/chdir.c: New file, support chdir via assist call. |
| * spu/chmod.c: New file, support chmod via assist call. |
| * spu/chown.c: New file, support chown via assist call. |
| * spu/fchdir.c: New file, support fchdir via assist call. |
| * spu/fchmod.c: New file, support fchmod via assist call. |
| * spu/fchown.c: New file, support fchown via assist call. |
| * spu/lchown.c: New file, support lchown via assist call. |
| * spu/mkdir.c: New file, support mkdir via assist call. |
| * spu/mknod.c: New file, support mknod via assist call. |
| * spu/rmdir.c: New file, support rmdir via assist call. |
| * spu/Makefile.in: Add new files. |
| |
| 2007-06-20 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/getpagesize.c: New file add getpagesize via an assist call. |
| * spu/jsre.h: Add JSRE_GETPAGESIZE. |
| * spu/Makefile.in: Add getpagesize. |
| |
| 2007-06-13 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/Makefile.in: Add nanosleep.c. |
| * spu/jsre.h: Add JSRE_NANOSLEEP. |
| * spu/nanosleep.c: New file, supply nanosleep via an assist call. |
| |
| 2007-06-05 Patrick Mansfield <patman@us.ibm.com> |
| |
| * spu/jsre.h: Remove the assist call structs and defines that are |
| specific to one assist call from here. |
| * spu/access.c: Move struct syscall_access_t to here. |
| * spu/fstat.c: Move struct syscall_fstat_t to here. |
| * spu/ftruncate.c: Move struct syscall_ftruncate_t to here. |
| * spu/gettimeofday.c: Move struct syscall_gettimeofday_t to here. |
| * spu/lseek.c: Move struct syscall_lseek_t and JSRE_SEEK defines to |
| here. |
| * spu/open.c: Move struct syscall_open_t and JSRE_O_ defines to here. |
| * spu/read.c: Move struct syscall_read_t to here, and actually use |
| it (it is the same as syscall_write_t). |
| * spu/stat.c: Move struct syscall_stat_t to here. |
| * spu/write.c: Move struct syscall_write_t to here. |
| * spu/close.c: Pass the address of the first and only argument to |
| __send_to_ppe rather than using an automatic variable and a |
| special struct. |
| * spu/dup.c: Ditto. |
| * spu/unlink.c: Ditto. |
| |
| 2007-05-30 Kazu Hirata <kazu@codesourcery.com> |
| |
| * m68k/cf-crt1.C, m68k/cf.sc, m68k/fido.sc, m68k/fido-crt0.S: |
| Replace __INIT_SECTION__ and __FINI_SECTION__ with _init and |
| _fini, respectively. |
| |
| 2007-05-23 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/syscalls.c: Change __send_to_ppe to return the result stored |
| in stored in slot 0 of the data, rather than have each assisted |
| call retrieve the value. |
| * spu/jsre.h: Remove the now unused syscall_out_t. |
| * spu/access.c: Use the __send_to_ppe result instead of the slot 0 |
| value, remove unused syscall_out_t variable. |
| * spu/close.c: Ditto. |
| * spu/dup.c: Ditto. |
| * spu/fstat.c: Ditto. |
| * spu/ftruncate.c: Ditto. |
| * spu/gettimeofday.c: Ditto. |
| * spu/lseek.c: Ditto. |
| * spu/open.c: Ditto. |
| * spu/read.c: Ditto. |
| * spu/stat.c: Ditto. |
| * spu/unlink.c: Ditto. |
| * spu/write.c: Ditto. |
| |
| 2007-05-23 Kazu Hirata <kazu@codesourcery.com> |
| |
| * m68k/fido.sc (.data): Move .jcr to .text. Catch .got.plt |
| and .got. |
| |
| 2007-05-07 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/open.c: Unconditionally set the "mode" to fix a bug where |
| mode was not properly set. |
| |
| 2007-05-03 Kazu Hirata <kazu@codesourcery.com> |
| |
| * m68k/fido-_exit.c (_exit): Use stop #0x700. |
| |
| 2007-04-27 Kazu Hirata <kazu@codesourcery.com> |
| |
| * m68k/fido.sc: Catch .text.*, .rodata.*, .data.*, .bss.*, |
| .ctor.*, and .dtor.*. Wrap ctor/dtor-related sections with KEEP. |
| |
| 2007-04-04 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/syscalls.c: Rename _send_to_ppe __send_to_ppe, and set errno |
| on return from the offload call. |
| * spu/jsre.h: Include sys/syscall.h for the send_to_ppe prototype. |
| * spu/access.c: Call __send_to_ppe instead of _send_to_ppe, and |
| remove the setting of errno. |
| * spu/close.c: Ditto. |
| * spu/dup.c: Ditto. |
| * spu/fstat.c: Ditto. |
| * spu/ftruncate.c: Ditto. |
| * spu/gettimeofday.c: Ditto. |
| * spu/lseek.c: Ditto. |
| * spu/open.c: Ditto. |
| * spu/read.c: Ditto. |
| * spu/stat.c: Ditto. |
| * spu/unlink.c: Ditto. |
| * spu/write.c: Ditto. |
| |
| 2007-03-01 Ben Elliston <bje@au.ibm.com> |
| |
| * spu/sbrk.c (sbrk): Adjust the stack pointer vector correctly so |
| that GCC runtime stack checking works. Handle the backchain, too. |
| |
| 2007-02-21 Patrick Mansfield <patmans@us.ibm.com> |
| |
| * spu/gettimeofday.c: New file which adds SPU gettimeofday. |
| * spu/jsre.h: Remove time, add gettimeofday. |
| * spu/Makefile.in: Ditto. |
| |
| 2007-02-21 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/crt0.S: Use jump, not ba, to skip the interrupt table. Use |
| "setf", not "nop", for common_v10_v32 compatibility. |
| Move out interrupt table to irqtable.S. Include here for non-ELF. |
| * cris/irqtable.S: Extracted from cris/crt0.S. Provide per-entry |
| weak default stub definitions. |
| * cris/crtn.c: Use "setf", not "nop", for common_v10_v32 |
| compatibility. |
| * cris/setup.S [__arch_common_v10_v32]: Return. |
| * cris/Makefile.in (BSP_OBJS): Add irqtable.o. |
| |
| 2007-02-15 Nick Clifton <nickc@redhat.com> |
| |
| * sparc/cygmon.ld.src: Link .rodata.* input sections into .text |
| output section. |
| * sparc/cygmon-sparc64-ld.src: Likewise. |
| |
| 2007-02-08 Dave Brolley <brolley@redhat.com> |
| |
| * mep: New target directory. |
| * README: Add MeP. |
| * configure.in: Add support for MeP. |
| * configure: Regenerated. |
| * mep/configure.in: New file. |
| * mep/configure: Ditto. |
| * mep/Makefile.in: Ditto. |
| * mep/aclocal.m4: Ditto. |
| * mep/crt0.S: Ditto. |
| * mep/crtn.S: Ditto. |
| * mep/sim-crt0.S: Ditto. |
| * mep/sim-crtn.S: Ditto. |
| * mep/fmax.ld: Ditto. |
| * mep/gcov-io.h: Ditto. |
| * mep/gmap_default.ld: Ditto. |
| * mep/handlers.c: Ditto. |
| * mep/h_reset.c: Ditto. |
| * mep/isatty.c: Ditto. |
| * mep/mep-bb.c: Ditto. |
| * mep/mep-gmon.c: Ditto. |
| * mep/min.ld: Ditto. |
| * mep/read.c: Ditto. |
| * mep/sbrk.c: Ditto. |
| * mep/sdram-crt0.S: Ditto. |
| * mep/sdram-crtn.S: Ditto. |
| * mep/simnovec-crt0.S: Ditto. |
| * mep/simple.ld: Ditto. |
| * mep/simsdran-crt0.S: Ditto. |
| * mep/syscalls.S: Ditto. |
| * mep/write.c: Ditto. |
| |
| 2007-01-19 Kazunori Asayama <asayama@sm.sony.co.jp> |
| |
| * spu/syscalls.c: Replace vector with __vector. |
| |
| 2007-01-09 Ben Elliston <bje@au.ibm.com> |
| |
| * spu/exit.c (_exit): Finish with an infinite loop to eliminate a |
| warning about this noreturn function returning. |
| |
| 2007-01-04 Kazu Hirata <kazu@codesourcery.com> |
| |
| Merge from newlib-csl-20060320-branch: |
| 2006-12-22 Nathan Sidwell <nathan@codesourcery.com> |
| |
| libgloss/ |
| * m68k/Makefile.in (CF_ISRS): Remove now shared routines. |
| * m68k/cf-crt0.S (__reset): Define here. |
| * m68k/cf-isrs.c: Share some ISRS. Add aliases for each IRQ slot. |
| * m68k/cf-isv.S: Move to .interrupt_vector section. Make each |
| slot a unique routine. |
| * m68k/cf.sc: Adjust for .interrupt_vector section. |
| |
| libgloss/ |
| * m68k/Makefile.in (m5273c3): Rename to ... |
| (m5272c3): ... here to fix typo. |
| (m5249c3): New. |
| (CF_BOARDS): Add it. |
| |
| 2006-01-03 Kazu Hirata <kazu@codesourcery.com> |
| |
| * arm/Makefile (RDPMON_OBJS): Add _exit.o and _kill.o. |
| (RDIMON_OBJS): Define in terms of RDPMON_OBJS. |
| (rdimon-_exit.o, rdimon-_kill.o): New. |
| * arm/_exit.c, arm/_kill.c: New. |
| * arm/syscalls.c (_exit, _kill): Remove. |
| |
| 2007-01-03 Kazu Hirata <kazu@codesourcery.com> |
| |
| Merge from newlib-csl-20060320-branch: |
| 2006-12-22 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/cf-crt0.S (__start): Adjust semihosting. |
| |
| 2007-01-02 Kazu Hirata <kazu@codesourcery.com> |
| |
| Merge from newlib-csl-20060320-branch: |
| 2006-12-22 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/cf-hosted.S (__hosted): Adjust semihosting. |
| |
| 2007-01-02 Ben Elliston <bje@au.ibm.com> |
| |
| * spu/time.c (time): Cast new sys.time value to unsigned int. |
| |
| 2006-12-25 Kazu Hirata <kazu@codesourcery.com> |
| |
| * arm/syscalls.c (_unlink, _system, _rename): Cast arguments |
| to do_AngelSWI to int. |
| |
| * arm/licfunc.c (do_AngelSWI): Remove. |
| * arm/syscalls.c (do_AngelSWI): Remove. |
| * arm/swi.h (do_AngelSWI): New. |
| |
| 2006-12-18 Kazu Hirata <kazu@codesourcery.com> |
| |
| Merge from newlib-csl-20060320-branch: |
| 2006-12-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * m68k/fido-crt0.S (_vector_table): Reference |
| _PrivilegeViolationHandler. |
| |
| 2006-12-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * m68k/fido-crt0.S (_start): Set %vbr for context 0 in |
| RAM configs. |
| * m68k/fido.sc: Clean up formatting. Add comments. Move |
| stack and heap end to SDRAM for SRAM and SDRAM configurations. |
| Put RedBoot application text in SRAM. |
| |
| 2006-12-13 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/Makefile (install_cf): Don't loop over files here. Only |
| install sources for the default multilib. |
| (install_fido): Likewise. |
| (install_io): Install bsps in one go. |
| |
| 2006-12-01 Nathan Sidwell <nathan@codesourcery.com> |
| Kazu Hirata <kazu@codesourcery.com> |
| |
| * configure.in: Recognize fido-*-*. |
| * configure: Regenerate. |
| * m68k/Makefile.in (CF_ISRS): Use addprefix. |
| (FIDO_CRT0, FIDO_BSP, FIDO_OBJS, FIDO_HANDLERS, |
| FIDO_UNHOSTED_SCRIPTS, FIDO_HOSTED_SCRIPTS, FIDO_SCRIPTS, |
| FIDO_SOURCES, all_fido, fido-%-crt0.o, fido-rom.ld, |
| fido-rom-hosted.ld, fido-sram.ld, fido-sram-hosted.ld, |
| fido-sdram.ld, fido-sdram-hosted.ld, fido-redboot.ld, |
| install_fido): New. |
| * m68k/asm.h (mbb): New. |
| * m68k/configure.in (DO): Check for __mfido__. |
| * m68k/configure: Regenerate. |
| * m68k/fido-_exit.c, m68k/fido-crt0.S, m68k/fido-handler.c, |
| m68k/fido-hosted.S, m68k/fido-sbrk.c, m68k/fido.h, |
| m68k/fido.sc, m68k/fido_profiling.h: New. |
| |
| 2006-12-18 Ben Elliston <bje@au.ibm.com> |
| |
| * spu/stat.c (stat): Cast new sys.pathname value to unsigned int. |
| |
| 2006-12-13 Ben Elliston <bje@au.ibm.com> |
| |
| * libnosys/_exit.c (_exit): Finish with an infinite loop to |
| eliminate a warning about this noreturn function returning. |
| |
| 2006-12-13 Sa Liu <saliu@de.ibm.com> |
| |
| * spu/access.c: New file |
| * spu/dup.c: New file |
| * spu/ftruncate.c: New file |
| * spu/jsre.h: add structures for new functions |
| * spu/time.c: New file |
| * spu/Makefile.in (access.o, dup.o, ftruncate.o, time.o): New targets. |
| |
| 2006-12-12 Ben Elliston <bje@au.ibm.com> |
| |
| * configure.in: Remove superfluous semicolons. |
| * configure: Regenerate. |
| |
| 2006-12-11 Kazu Hirata <kazu@codesourcery.com> |
| |
| Merge from newlib-csl-20060320-branch: |
| 2006-12-01 Nathan Sidwell <nathan@codesourcery.com> |
| Kazu Hirata <kazu@codesourcery.com> |
| |
| * m68k/Makefile.in (CF_ISRS): Use addprefix. |
| |
| 2006-11-01 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/Makefile.in (CFLAGS): Do not clear. Add to all compilations. |
| (ARFLAGS): Remove commented out definition. |
| |
| |
| * m68k/configure.in (DO) Set to list of target cpu families. |
| * m68k/configure: Rebuilt. |
| * m68k/Makefile.in (DO): New. |
| (UNHOSTED_BSP, UNHOSTED_OBJS, HOSTED_BSP, HOSTED_OBJS): Move |
| later. |
| (m5208evb, m5213evb, m52235evb, m5235evb, m5273c3, m5275evb, |
| m5282evb, m5329evb, m5485evb): Move earlier. |
| (all): Add all_$DO dependencies. |
| (all_cf, all_m68k): New targets, depend on cf & m68k bsps as |
| appropriate. |
| (m%-ram.ld, m%-rom.ld, m%-ram-hosted.ld, m%-rom-hosted.ld): Add |
| 'm' prefix. |
| (install): Add install_$DO dependencies. |
| (install_cf, install_m68k): New targets. Perform cf and m68k |
| installs as appropriate. |
| (install_io): New, install the io libraries. |
| |
| |
| 2006-10-23 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/Makefile.in (CF_CRT0): Rename to CF_CRT0S, separate hosted |
| & unhosted versions. |
| (CF_OBJS): Add cf-isv.o. |
| (CF_SOURCES): Add cf-isv.S. |
| (cf-hosted-crt0.o, cf-unhosted-crt0.o): New targets. |
| * m68k/cf-isv.S: New, broken out of ... |
| * m68k/cf-crt0.S: ... here. Add HOSTED & UNHOSTED differences. |
| * m68k/cf-crt1.c (__start1): Add heap_limit argument. |
| (__heap_limit): Define. |
| * m68k/cf-sbrk.c (__heap_limit): Declare. |
| (sbrk): Adjust for __heap_limit. |
| * m68k/cf.sc: Use different crt0's for hosted & unhosted. |
| Install a separate isv.o file. |
| * m68k/io.h (HOSTED_PUTCHAR): Replace with ... |
| (HOSTED_INIT_SIM): ... this. |
| |
| |
| 2006-10-20 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/Makefile.in (CF_BOARDS): Add m5275evb. |
| (m5275evb): New board. |
| |
| |
| 2006-10-20 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * m68k/cf.sc: Add linkonce sections and |
| DWARF sections. |
| |
| |
| 2006-10-07 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/Makefile.in: Adjust Coldfire rules. |
| (BDM_CRT0, BDM_BSP, BDM_OBJS, BDM_ISRS): Rename to ... |
| (CF_CRT0, CF_BSP, CF_OBJS, CF_ISRS): ... here. Adjust. |
| (BDM_OTHER_OBJS): Remove. |
| (BDM_SYSOBJS): Rename to ... |
| (UNHOSTED_OBJS): ... here. Adjust. |
| (UNHOSTED_BSP, HOSTED_OBJS, HOSTED_BSP): New. |
| (CF_HOSTED_SCRIPTS): New. |
| (CF_SCRIPTS, CF_SOURCES): Adjust. |
| * m68k/cf.sc: Add IO library variable. |
| * m68k/bdm-crt0.S, m68k/bdm-crt1.c, m68k/bdm-isrs.c, |
| m68k/bdm-sbrk.c, m68k/bdm-semihost.S: Rename to ... |
| * m68k/cf-crt0.S, m68k/cf-crt1.c, m68k/cf-isrs.c, m68k/cf-sbrk.c, |
| m68k/cf-hosted.S: ... here. |
| * m68k/cf-exit.c: New. |
| * m68k/bdm-gdb.h, m68k/bdm-semihost.h: Merge into ... |
| * m68k/io.h: ... here. Add unhosted support. Adjust conversion |
| function names. |
| * m68k/bdm-gdb.c: Rename to ... |
| * m68k/io-gdb.c: ... here. Adjust names of conversion functions. |
| * m68k/bdm-close.c, m68k/bdm-exit.c, m68k/bdm-fstat.c, |
| m68k/bdm-gettimeofday.c, m68k/bdm-isatty.c, m68k/bdm-lseek.c, |
| m68k/bdm-open.c, m68k/bdm-read.c, m68k/bdm-rename.c, |
| m68k/bdm-stat.c, m68k/bdm-system.c, m68k/bdm-time.c, |
| m68k/bdm-unlink.c, m68k/bdm-write.c: Rename to ... |
| * m68k/io-close.c, m68k/io-exit.c, m68k/io-fstat.c, |
| m68k/io-gettimeofday.c, m68k/io-isatty.c, m68k/io-lseek.c, |
| m68k/io-open.c, m68k/io-read.c, m68k/io-rename.c, m68k/io-stat.c, |
| m68k/io-system.c, m68k/io-time.c, m68k/io-unlink.c, |
| m68k/io-write.c: ... here. Include io.h. Adjust for hosted & |
| unhosted libraries. Adjust names of gdb conversion functions. |
| |
| |
| 2006-09-29 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/bdm-semihost.S: Add more comments. Make instruction weirder. |
| |
| 2006-09-22 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/bdm-crt1.c (hardware_init_hook): Use #defines for CACR bits. |
| |
| 2006-09-18 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/Makefile.in: Don't force a frame pointer on the ISRs. |
| * m68k/bdm-crt1.c (__start1): Don't set the VBR here. |
| (hardeare_init_hook): Define weakly. Set VBR here, enable caching |
| if supported. |
| |
| |
| * m68k/Makefile.in (bdm-semihost.o): Build from bdm-semihost.S. |
| * m68k/bdm-semihost.c: Remove. |
| * m68k/bdm-semihost.S: New. |
| * m68k/bdm-crt0.S: Don't install semihosting trap handler. |
| * m68k/bdm-close.c, bdm-exit.c, bdm-fstat.c, bdm-gettimeofday.c, |
| bdm-isatty.c, bdm-lseek.c, bdm-open.c, bdm-read.c, bdm-rename.c, |
| bdm-stat.c, bdm-system.c, bdm-unlink.c, bdm-write.c): Update. |
| * m68k/bdm-isrs.c: Update comment. |
| * m68k/bdm-semihost.h (BDM_TRAPNUM, BDM_FUNC_REG, BDM_ARG_REG, |
| BDM_TRAP): Remove. |
| (__bdm_semihost): Declare. |
| |
| |
| 2006-09-15 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/Makefile.in (BDM_OTHER_OBJS): Remove sbrk.o. |
| (BDM_SYSOBJS): Add bdm-sbrk.o. |
| * m68k/bdm-sbrk.c: New. |
| |
| |
| 2006-09-06 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/Makefile.in (CF_SOURCES): New. |
| (install): Install them. |
| |
| |
| 2006-09-01 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/cf.sc: Add .jcr section to .text. |
| |
| 2006-12-11 Ben Elliston <bje@au.ibm.com> |
| |
| * configure.in: Remove extra whitespace from config_testsuite = |
| VALUE statements to eliminate shell errors. |
| * configure: Regenerate. |
| |
| 2006-12-08 Sa Liu <saliu@de.ibm.com> |
| |
| * spu/exit.c (libgloss_exit): Rename from this .. |
| (_exit): .. to this. Overhaul. |
| (exit): Remove. |
| * spu/crt0.S, spu/crti.S, spu/crtn.S: New files. |
| * spu/crt0.C, spu/init.c: Remove. |
| * spu/configure.in (AC_INIT): Check for crt0.S, not crt0.C. |
| * spu/configure: Regenerate. |
| * spu/Makefile.in (crti.o, crtn.o, crt1.o, crt2.o): New targets. |
| (OBJS): Remove init.o. |
| (CRTOBJS): New. |
| (OUTPUTS): Add $(CRTOBJS). |
| |
| 2006-11-27 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * mips/crt0.S: Fix preprocessor statements from previous patch |
| to be ANSI. |
| |
| 2006-11-24 Thiemo Seufer <ths@mips.com> |
| Nigel Stephens <nigel@mips.com> |
| |
| * mips/crt0.S (_start): Use all available float registers. Don't touch |
| SR_PE on post-mips2 CPUs, it means soft reset there. |
| |
| 2006-11-22 Luca Barbato <lu_zero@gentoo.org> |
| |
| * spu/syscalls.c: Include spu_intrinsics.h to provide vector keyword. |
| |
| 2006-11-17 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * mn10300/Makefile.in: Add spaces after do in "for" loop. |
| |
| 2006-11-08 Jie Zhang <jie.zhang@analog.com> |
| |
| * bfin/configure.in: New. |
| * bfin/crt0.S: New. |
| * bfin/Makefile.in: New. |
| * bfin/syscalls.c: New. |
| * bfin/aclocal.m4: Generate. |
| * bfin/configure: Ditto. |
| * configure.in: Add support for bfin-*-*. |
| * configure: Regenerate. |
| * syscall.h (SYS_argc): Define. |
| (SYS_argnlen): Define. |
| (SYS_argn): Define. |
| |
| 2006-10-10 Thiemo Seufer <ths@mips.com> |
| |
| * mips/Makefile.in: Add INCLUDES to local compile rules. |
| |
| 2006-10-06 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * Makefile.in: Add CFLAGS_FOR_TARGET and CCASFLAGS to |
| FLAGS_TO_PASS. |
| |
| 2006-10-03 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * arm/linux-syscalls0.c: Rewrite bx insn architecture flag check |
| to avoid use of __ARM_ARCH__. |
| |
| 2006-10-02 Nick Clifton <nickc@redhat.com> |
| |
| * arm/linux-syscalls0.c: Add arm architecture flag |
| checks around bx insn. |
| |
| 2006-09-07 Masaki Muranaka <monaka@monami-software.com> |
| |
| * xstormy16/Makefile.in (clean): Fix a mismatched parenthesis. |
| |
| 2006-09-01 Kazu Hirata <kazu@codesourcery.com> |
| |
| Merge from newlib-csl-20060320-branch: |
| 2006-08-31 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/bdm-crt1.c: Call hardware_init_hook before copying |
| initialized data. |
| |
| * m68k/Makefile.in (CF_BDM_SCRIPTS): Rename to CF_RAM_SCRIPTS. |
| (CF_SCRIPTS): Update. |
| (%-bdm.ld): Rename to %-ram.ld. |
| |
| 2006-08-25 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/Makefile.in (DBUG_BSP, DBUG_OBJS): Remove. |
| (BDM_CRT0): New. |
| (BDM_OBJS): Add bdm-crt1.o. |
| (BDM_OTHER_OBJS): Remove print.o putnum.o |
| (CF_BOARDS): New. |
| (CF_BDM_SCRIPTS): Generated name of ram scripts. |
| (CF_ROM_SCRIPTS): Generated name of rom scripts. |
| (CF_SCRIPTS): Adjust. |
| (all): Add BDM_CRT0. |
| (bdm-crt0.o, bdm-crt1.o): New targets. |
| (bdm-isv.o): Remove. |
| (m5208evb, m5213evb, m52235evb, m5235evb, m5273c3, m5282evb, |
| m5329evb, m5485evb): New. |
| (%-bdm.ld, %-rom.ld): New. Replace individual linker script rules. |
| (install): Remove DBUG installs. |
| * m68k/bdm-crt0.S: New. |
| * m68k/bdm-crt1.c: New. |
| * m68k/bdm-exit.c: Call __reset. |
| * m68k/bdm-isv.c: Remove. |
| * m68k/cf.sc: Adjust to produce either rom or ram images. |
| * m68k/dbug-exit.S, m68k/dbug-inbyte.S, m68k/dbug-outbyte.S: Remove. |
| |
| 2006-07-24 Nathan Sidwell <nathan@codesourcery.com> |
| |
| Bug 844 |
| * m68k/cf.sc: Set entry point to _start. |
| * m68k/crt0.X (_start): New name for entrypoint |
| (start): Weak alias for start. |
| |
| 2006-06-09 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/bdm-system.c (_system): Support system(NULL). |
| |
| 2006-06-08 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/bdm-system.c (_system): Properly encode non failure exit |
| code. |
| |
| 2006-06-05 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/Makefile.in (BDM_SYSOBJS): Remove bdm-inbyte.o. |
| Add bdm-time.o. |
| * m68k/bdm-close.c: Add copyright notice. |
| * m68k/bdm-fstat.c: Add copyright notice. |
| * m68k/bdm-gettimeofday.c: Add copyright notice. |
| * m68k/bdm-inbyte.c: Remove. |
| * m68k/bdm-isatty.c: Add copyright notice. |
| * m68k/bdm-lseek.c: Add copyright notice. Fix &/| thinko. |
| * m68k/bdm-open.c: Add copyright notice. |
| * m68k/bdm-read.c: Add copyright notice. |
| * m68k/bdm-rename.c: Add copyright notice. |
| * m68k/bdm-stat.c: Add copyright notice. |
| * m68k/bdm-system.c: Add copyright notice. |
| * m68k/bdm-time.c: New. |
| * m68k/bdm-unlink.c: Add copyright notice. |
| * m68k/bdm-write.c: Add copyright notice. |
| |
| 2006-05-25 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/Makefile.in (m52235-dbug.ld, m52235-bdm.ld): New |
| scripts. |
| |
| 2006-05-24 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/Makefile.in (BDM_SYSOBJS): Remove bdm-outbyte.o. |
| * m68k/bdm-outbyte.c: Delete. |
| * m68k/bdm-semihost.h (BDM_OUTBYTE): Mark as obsolete. |
| |
| 2006-05-22 Sandra Loosemore <sandra@codesourcery.com> |
| |
| * m68k/bdm-semihost.h: Add new constants for additional |
| semihosting functions. Add new BDM_TRAP macro to encapsulate |
| inline asm. |
| * m68k/bdm-exit.c (_exit): Use new BDM_TRAP macro. |
| * m68k/bdm-outbyte.c (outbyte): Ditto. |
| * m68k/bdm-isrs.c, m68k/bdm-isv.c: Former BDM_TRAP |
| now called BDM_TRAPNUM. |
| * m68k/bdm-gdb.h, m68k/bdm-gdb.c: New files |
| containing declarations and conversion functions for GDB's fileio |
| protocol. |
| * m68k/bdm-close.c: New file to define corresponding function. |
| * m68k/bdm-fstat.c: Ditto. |
| * m68k/bdm-gettimeofday.c: Ditto. |
| * m68k/bdm-isatty.c: Ditto. |
| * m68k/bdm-lseek.c: Ditto. |
| * m68k/bdm-open.c: Ditto. |
| * m68k/bdm-read.c: Ditto. |
| * m68k/bdm-rename.c: Ditto. |
| * m68k/bdm-stat.c: Ditto. |
| * m68k/bdm-system.c: Ditto. |
| * m68k/bdm-unlink.c: Ditto. |
| * m68k/bdm-write.c Ditto. |
| * m68k/Makefile.in: Add dependencies for new files. |
| |
| 2006-03-29 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/bdm-isv.c (software_init_hook): Fix trap numbering. |
| |
| * m68k/Makefile.in (CF_SCRIPTS): Add m5329 board. |
| Reorder. |
| (*-dbug.ld, *-bdm.ld): Add appropriate IO definition. |
| (m5329evb-dbug.ld, m5329evb-bdm.ld): New. |
| * cf.sc (GROUP): Revert previous change. Add IO library. |
| |
| * m68k/Makefile.in (BDM_BSP, BDM_OBJS, BDM_ISRS): New. |
| (CF_SCRIPTS): Rename dbug scripts. Add bdm scripts. Add m5485 |
| scripts. |
| (all): Add new targets. |
| (BDM_BSP): New target. |
| (bdm-isv.o, bdm-exit.o, bdm-outbyte.o, bdm-semihost.o): New |
| targets. |
| (BDM_ISRS): New targets. |
| (m5208evb.ld, m5213evb.ld, m5235evb.ld, m5272c3.ld, m5282evb.ld): |
| Rename and adjust. |
| (m5485evb-dbug): New. |
| (m5208evb-bdm.ld, m5213evb-bdm.ld, m5235evb-bdm.ld, |
| m5272c3-bdm.ld, m5282evb-bdm.ld, m5485evb-bdm.ld): New. |
| (install): Add BDM_BSP. |
| * m68k/bdm-exit.c: New |
| * m68k/bdm-inbyte.c: New |
| * m68k/bdm-outbyte.c: New |
| * m68k/bdm-semihost.c: New |
| * m68k/bdm-semihost.h: New |
| * m68k/bdm-isrs.c: New. |
| * m68k/bdm-isv.c: New. |
| * dbug-cf.sc: Renamed to ... |
| * cf.sc: ... here. Add bdm flexibility. Remove GROUP |
| |
| 2006-05-22 Sandra Loosemore <sandra@codesourcery.com> |
| |
| * m68k/bdm-semihost.h: Add new constants for additional |
| semihosting functions. Add new BDM_TRAP macro to encapsulate |
| inline asm. |
| * m68k/bdm-exit.c (_exit): Use new BDM_TRAP macro. |
| * m68k/bdm-outbyte.c (outbyte): Ditto. |
| * m68k/bdm-isrs.c, m68k/bdm-isv.c: Former BDM_TRAP |
| now called BDM_TRAPNUM. |
| * m68k/bdm-gdb.h, m68k/bdm-gdb.c: New files |
| containing declarations and conversion functions for GDB's fileio |
| protocol. |
| * m68k/bdm-close.c: New file to define corresponding function. |
| * m68k/bdm-fstat.c: Ditto. |
| * m68k/bdm-gettimeofday.c: Ditto. |
| * m68k/bdm-isatty.c: Ditto. |
| * m68k/bdm-lseek.c: Ditto. |
| * m68k/bdm-open.c: Ditto. |
| * m68k/bdm-read.c: Ditto. |
| * m68k/bdm-rename.c: Ditto. |
| * m68k/bdm-stat.c: Ditto. |
| * m68k/bdm-system.c: Ditto. |
| * m68k/bdm-unlink.c: Ditto. |
| * m68k/bdm-write.c Ditto. |
| * m68k/Makefile.in: Add dependencies for new files. |
| |
| 2006-08-30 Kazunori Asayama <asayama@sm.sony.co.jp> |
| |
| * spu/syscalls.c: Add a new argument to _send_to_ppe() to |
| specify signal code. |
| * spu/jsre.h: Update declaration of _send_to_ppe(). |
| * spu/close.c: Replace _send_to_ppe_0x2101() by _send_to_ppe(). |
| * spu/fstat.c: Ditto. |
| * spu/lseek.c: Ditto. |
| * spu/open.c: Ditto. |
| * spu/read.c: Ditto. |
| * spu/stat.c: Ditto. |
| * spu/unlink.c: Ditto. |
| * spu/write.c: Ditto. |
| |
| 2006-08-30 Kazunori Asayama <asayama@sm.sony.co.jp> |
| |
| * spu/Makefile.in: Add dependency. |
| |
| 2006-08-24 Paul Brook <paul@codesourcery.com> |
| |
| * arm/linux-crt0.c: Disable Arm stub for Thumb-2. |
| |
| 2006-08-23 Kazunori Asayama <asayama@sm.sony.co.jp> |
| |
| * spu/Makefile.in: Add new object files. |
| * spu/syscalls.c: Move each system call to individual file. |
| * spu/jsre.h: Add declaration of _send_to_ppe_0x2101(). |
| * spu/close.c: New file. Moved from spu/syscalls.c. |
| * spu/fstat.c: Likewise. |
| * spu/getpid.c: Likewise. |
| * spu/isatty.c: Likewise. |
| * spu/kill.c: Likewise. |
| * spu/lseek.c: Likewise. |
| * spu/open.c: Likewise. |
| * spu/read.c: Likewise. |
| * spu/stat.c: Likewise. |
| * spu/unlink.c: Likewise. |
| * spu/write.c: Likewise. |
| |
| 2006-08-21 David Ung <davidu@mips.com> |
| |
| * mips/Makefile.in: Add rule for cygmon.o and pass the -mno-mips16 |
| option since it uses the syscall instruction. |
| |
| 2006-08-16 Joel Schopp <jschopp@austin.ibm.com> |
| |
| * spu/Makefile.in: Add special compiler |
| options to reduce size. |
| |
| 2006-08-16 Joel Schopp <jschopp@austin.ibm.com> |
| |
| * spu/jsre.h(JSRE_STAT): New define. |
| (syscall_stat_t): New type. |
| * spu/syscalls.c(stat): New syscall. |
| |
| 2006-08-16 Joel Schopp <jschopp@austin.ibm.com> |
| |
| * configure.in: Add spu support. |
| * configure: Regenerated. |
| * spu/Makefile.in: New file. |
| * spu/aclocal.m4: Ditto. |
| * spu/configure: Ditto. |
| * spu/configure.in: Ditto. |
| * spu/crt0.c: Ditto. |
| * spu/exit.c: Ditto. |
| * spu/init.c: Ditto. |
| * spu/jsre.h: Ditto. |
| * spu/sbrk.c: Ditto. |
| * spu/syscalls.c: Ditto. |
| |
| 2006-07-05 Shaun Jackman <sjackman@gmail.com> |
| |
| * arm/linux-crt0.S: Remove file. |
| * arm/linux-crt0.c: New file. Supports PIC code. |
| |
| 2006-07-04 Shaun Jackman <sjackman@gmail.com> |
| |
| * arm/linux-syscalls0.S (ftruncate, getegid, geteuid, getgid, |
| getgroups, getpgid, getpgrp, getuid, lchown, pause, pipe, |
| setpgid, setgid, setsid, setuid, sigprocmask, sync, uname): New |
| system call. |
| |
| 2006-06-30 DJ Delorie <dj@redhat.com> |
| |
| * m32c/crt0.S (done_inilist): Fix dwarf2 address sizes. |
| |
| 2006-06-23 Shaun Jackman <sjackman@gmail.com> |
| |
| * arm/elf-linux.specs: New file. |
| |
| 2006-06-13 Sandra Loosemore <sandra@codesourcery.com> |
| |
| * arm/syscalls.c (_unlink, isatty, _system, _rename): |
| Make them do something useful in the ARM_RDI_MONITOR case. |
| |
| 2006-06-08 Fred Fish <fnf@specifix.com> |
| |
| * mips/idt.ld, mips/idt32.ld, mips/idt64.ld, mips/nullmon.ld, |
| mips/pmon.ld: Keep special sections generated by mips gcc. |
| |
| 2006-06-05 Shaun Jackman <sjackman@gmail.com> |
| |
| * arm/linux-syscalls0.S (reboot): Remove. |
| * arm/linux-syscalls1.c (reboot): New function. |
| |
| 2006-06-05 Shaun Jackman <sjackman@gmail.com> |
| |
| * arm/syscalls.c (kill) [ARM_RDI_MONITOR]: Use the signal |
| argument to choose an ADP exception reason. |
| * arm/libcfunc.c (abort): Remove this function. |
| |
| 2006-05-30 Shaun Jackman <sjackman@gmail.com> |
| |
| * arm/Makefile.in: Add Linux syscall interface. |
| * arm/linux-crt0.S: New file. |
| * arm/linux-syscall.h: New file. |
| * arm/linux-syscalls0.S: New file. |
| * arm/linux-syscalls1.c: New file. |
| |
| 2006-05-23 Fred Fish <fnf@specifix.com> |
| |
| * mips/configure.in: Change mipsisa64-*-* to |
| mipsisa64*-*-* to catch minor variations like |
| mipsisa64sb1. |
| * mips/configure: Regenerated. |
| |
| 2006-05-10 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * Makefile.in: Pass some additional flags in FLAGS_TO_PASS. |
| * configure.in: Add additional flags when creating Makefile. |
| * configure: Regenerated. |
| * arm/configure |
| * arm/configure.in: Set with_multisubdir when creating Makefile. |
| * cris/configure.in: Ditto. |
| * d30v/configure.in: Ditto. |
| * frv/configure.in: Ditto. |
| * i386/configure.in: Ditto. |
| * iq2000/configure.in: Ditto. |
| * libnosys/configure.in: Ditto. |
| * m32c/configure.in: Ditto. |
| * m32r/configure.in: Ditto. |
| * m68hc11/configure.in: Ditto. |
| * m68k/configure.in: Ditto. |
| * mcore/configure.in: Ditto. |
| * mips/configure.in: Ditto. |
| * mn10200/configure.in: Ditto. |
| * mn10300/configure.in: Ditto. |
| * mt/configure.in: Ditto. |
| * pa/configure.in: Ditto. |
| * rs6000/configure.in: Ditto. |
| * sparc/configure.in: Ditto. |
| * cris/configure: Regenerated. |
| * d30v/configure: Ditto. |
| * frv/configure: Ditto. |
| * i386/configure: Ditto. |
| * iq2000/configure: Ditto. |
| * libnosys/configure: Ditto. |
| * m32c/configure: Ditto. |
| * m32r/configure: Ditto. |
| * m68hc11/configure: Ditto. |
| * m68k/configure: Ditto. |
| * mcore/configure: Ditto. |
| * mips/configure: Ditto. |
| * mn10200/configure: Ditto. |
| * mn10300/configure: Ditto. |
| * mt/configure: Ditto. |
| * pa/configure: Ditto. |
| * rs6000/configure: Ditto. |
| * sparc/configure: Ditto. |
| |
| 2006-04-19 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * configure.in: Modified to support autoconf 2.59. |
| * */configure.in: Ditto. |
| * configure: Regenerated. |
| * */configure: Ditto. |
| * wince/aclocal.m4: Ditto. |
| * acinclude.m4: New file. |
| * aclocal.m4: Ditto. |
| * arm/aclocal.m4: Ditto. |
| * cris/aclocal.m4: Ditto. |
| * crx/aclocal.m4: Ditto. |
| * d30v/aclocal.m4: Ditto. |
| * fr30/aclocal.m4: Ditto. |
| * frv/aclocal.m4: Ditto. |
| * hp74x/aclocal.m4: Ditto. |
| * i386/aclocal.m4: Ditto. |
| * i960/aclocal.m4: Ditto. |
| * iq2000/aclocal.m4: Ditto. |
| * libnosys/aclocal.m4: Ditto. |
| * m32c/aclocal.m4: Ditto. |
| * m32r/aclocal.m4: Ditto. |
| * m68hc11/aclocal.m4: Ditto. |
| * m68k/aclocal.m4: Ditto. |
| * mcore/aclocal.m4: Ditto. |
| * mips/aclocal.m4: Ditto. |
| * mn10200/aclocal.m4: Ditto. |
| * mn10300/aclocal.m4: Ditto. |
| * mt/aclocal.m4: Ditto. |
| * pa/aclocal.m4: Ditto. |
| * rs6000/aclocal.m4: Ditto. |
| * sparc/aclocal.m4: Ditto. |
| * sparc/libsys/aclocal.m4: Ditto. |
| * xstormy16/aclocal.m4: Ditto. |
| |
| 2006-04-18 Mark Mitchell <mark@codesourcery.com> |
| |
| * doc/porting.texi: Document libgloss build conventions. |
| |
| 2006-03-22 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * mt/startup-16-002.S (.internal_io): Make @nobits. |
| * mt/startup-16-003.S (.internal_io): Make @nobits. |
| * mt/startup-ms2.S (.internal_io): Make @nobits. |
| |
| 2006-03-02 DJ Delorie <dj@redhat.com> |
| |
| * m32c/exit.S: Preserve r1. |
| |
| 2006-02-24 Paul Brook <paul@codesourcery.com> |
| |
| * arm/redboot-crt0.S: Use cps in Thumb-2 mode. |
| |
| 2006-02-22 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k/Makefile.in (CF_SCRIPTS): New. |
| (all): Add CF_SCRIPTS. |
| (m5208evb.ld, m5213evb.ld, m5235evb.ld, m5272c3.ld, |
| m5282evb.ld): New targets |
| (install): Iterate over CF_SCRIPTS. |
| * m68k/crt0.S: Don't use dbra on any cf chips. |
| * m68k/dbug-cf.sc: New. |
| |
| 2006-02-07 Paul Brook <paul@codesourcery.com> |
| |
| * arm/crt0.S: Add Thumb-2 startup code. |
| * arm/redboot-crt0.S: Ditto. |
| * arm/libcfunc.c (do_AngelSWI): Use AngelSWIInsn. |
| * arm/swi.h (AngelSWIInsn, AngelSWIAsm): Define. |
| * arm/trap.S: Disable for Thumb-2. |
| |
| 2006-01-18 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * mt/ms2.ld (.sram): Correct typo in section names. |
| |
| 2006-01-16 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * mt/Makefile.in (SCRIPTS, CRT0): Add ms2 files. |
| (crt0-ms2.o): New target. |
| * mt/crt0-ms2.S, mt/exit-ms2.c, mt/ms2.ld, mt/startup-ms2.S: New. |
| |
| 2006-01-04 Paul Brook <paul@codesourcery.com> |
| |
| * m68k/bcc.ld: Add .got.plt and .got |
| * m68k/idp.ld: Ditto. |
| * m68k/idpgdb: Ditto. |
| * m68k/mvme135.ld: Ditto. |
| * m68k/sbc5204.ld: Ditto. |
| * m68k/sbc5206.ld: Ditto. |
| * m68k/sim.ld: Ditto. |
| |
| 2005-12-13 DJ Delorie <dj@redhat.com> |
| |
| * m32c/crt0.S: Add support for preinit, init, and fini arrays, and |
| .init and .fini processing. |
| * m32c/crtn.S: Likewise. |
| * m32c/exit.S: Likewise. |
| |
| 2005-12-13 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * mt/16-002.ld: Change architecture to 'mt'. Remove |
| SEARCH_DIR. |
| * mt/16-003.ld: Likewise. |
| * mt/64-001.ld: Likewise. |
| * mt/Makefile.in: Change comment to reference 'mt' rather than 'ms1'. |
| * mt/crt0.S: Likewise. |
| |
| 2005-12-12 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * configure.in: Replace ms1 arch with mt arch. |
| * configure: Rebuilt. |
| * mt: Renamed from ms1 dir. |
| |
| 2005-12-06 Paul Brook <paul@codesourcery.com> |
| |
| * m68k/bcc.ld: Add .text.*, .rodata.*, .data.* and .bss.*. |
| * m68k/idp.ld: Ditto. |
| * m68k/idpgdb: Ditto. |
| * m68k/mvme135.ld: Ditto. |
| * m68k/sbc5204.ld: Ditto. |
| * m68k/sbc5206.ld: Ditto. |
| * m68k/sim.ld: Ditto. |
| |
| 2005-11-30 Shaun Jackman <sjackman@gmail.com> |
| |
| * libnosys/Makefile.in (OBJS): Add chown, readlink, and symlink. |
| * libnosys/chown.c: New file. |
| * libnosys/readlink.c: New file. |
| * libnosys/symlink.c: New file. |
| |
| 2005-11-30 Shaun Jackman <sjackman@gmail.com> |
| |
| * arm/libcfunc.c (clock, sleep, usleep): New functions. |
| * arm/syscalls.c (_clock): New function. |
| (_times): Call _clock. |
| |
| 2005-11-17 Shaun Jackman <sjackman@gmail.com> |
| |
| * libgloss/arm/libcfunc.c (isatty): Call _isatty. GDB now supports |
| the IsTTY SWI that _isatty calls. |
| |
| 2005-11-17 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/linunistd.h: Don't redefine errno as extern int. |
| |
| 2005-10-20 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * arm/configure.in: Add AC_SUBST for BUILD_CRT0_TRUE and |
| BUILD_CRT0_FALSE. |
| * arm/configure: Regenerate. |
| |
| 2005-10-17 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * arm/configure.in: Support building crt0.o when syscalls |
| are disabled in newlib. |
| * arm/configure: Regenerated. |
| |
| 2005-10-03 James E Wilson <wilson@specifix.com> |
| |
| * mips/array.ld, mips/cfe.ld, mips/ddb-kseg0.ld, mips/ddb.ld, |
| mips/dve.ld, mips/idt.ld, mips/idt32.ld, mips/idt64.ld, |
| mips/idtecoff.ld, mips/jmr3904app-java.ld, mips/jmr3904app.ld, |
| jmr3904dram-java.ld, mips/jmr3904dram.ld, mips/lsi.ld, mips/nullmon.ld, |
| mips/pmon.ld: Add support for .bss.* sections. |
| |
| 2005-09-23 James E Wilson <wilson@specifix.com> |
| |
| * mips/array.ld, mips/cfe.ld, mips/ddb-kseg0.ld, mips/ddb.ld, |
| mips/dve.ld, mips/idt.ld, mips/idt32.ld, mips/idt64.ld, |
| mips/idtecoff.ld, mips/jmr3904app-java.ld, mips/jmr3904app.ld, |
| jmr3904dram-java.ld, mips/jmr3904dram.ld, mips/lsi.ld, mips/nullmon.ld, |
| mips/pmon.ld: Change x* to x.* in existing linkonce lines. Add |
| support for .gnu.linkonce.b.*. |
| |
| 2005-08-30 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * rs6000/Makefile.in (VPATH): Use colon as separator. |
| |
| 2005-08-24 Aldy Hernandez <aldyh@redhat.com> |
| |
| * ms1/access.c: Change copyright notice. |
| |
| 2005-08-19 DJ Delorie <dj@redhat.com> |
| |
| * m32c/Makefile.in (m16cmon.ld, m32cmon.ld): Fix output names. |
| (*.o): Add dependencies. |
| * m32c/m32csys.h: Move syscall location to 0x400 as per Renesas |
| recommendations. |
| |
| 2005-08-18 DJ Delorie <dj@redhat.com> |
| |
| * m32c/Makefile.in: Block out memory regions reserved for monitors |
| and simulators. Add monitor link scripts. |
| |
| 2005-08-16 Shaun Jackman <sjackman@gmail.com> |
| |
| * arm/syscalls.c (initialise_monitor_handles): Set |
| monitor_stderr to the result of SWI_open(":tt", "a") |
| instead of simply duplicating stdout. |
| |
| 2005-08-10 DJ Delorie <dj@redhat.com> |
| |
| * configure.in: Add m32c support. |
| * configure: Regenerated |
| * m32c: New directory, Renesas R8C/M16C/M32C support. |
| * m32c/abort.S m32c/argvlen.S m32c/argv.S m32c/chdir.S, |
| m32c/chmod.S m32c/close.S m32c/configure m32c/configure.in, |
| m32c/crt0.S, m32c/crtn.S, m32c/exit.S, m32c/fstat.S, |
| m32c/genscript, m32c/getpid.S, m32c/gettimeofday.S, |
| m32c/heaptop.S, m32c/isatty.S, m32c/kill.S, m32c/link.S, |
| m32c/lseek.S, m32c/m32csys.h, m32c/m32c.tmpl, m32c/Makefile.in, |
| m32c/open.S, m32c/read.S, m32c/sbrk.c, m32c/stat.S, m32c/time.S, |
| m32c/times.S, m32c/unlink.S, m32c/utime.S, m32c/write.S: New files |
| |
| 2005-08-02 Shaun Jackman <sjackman@gmail.com> |
| |
| * libgloss/arm/libcfunc.c (isatty): New function. |
| |
| 2005-08-02 Shaun Jackman <sjackman@gmail.com> |
| |
| * libgloss/arm/syscalls.c (_exit): Call _kill with the second |
| argument set to -1, which is an invalid signal number. |
| (_kill): Comment and coding style changes only. |
| (_raise): Remove function. |
| |
| 2005-07-19 Paul Brook <paul@codesourcery.com> |
| |
| * arm/crt0.S: Ensure doubleword stack alignment. |
| |
| 2005-07-18 Richard Sandiford <richard@codesourcery.com> |
| |
| * mips/array.ld (.sdata): Include .gnu.linkonce.s.*, not |
| .gnu.linkonce.s*. |
| (.sbss): Include .sbss.* and .gnu.linkonce.sb.*. |
| * mips/cfe.ld, mips/ddb-kseg0.ld, mips/ddb.ld, mips/dve.ld, |
| * mips/idt32.ld, mips/idt64.ld, mips/idtecoff.ld, mips/idt.ld, |
| * mips/jmr3904app-java.ld, mips/jmr3904app.ld, |
| * mips/jmr3904dram-java.ld, mips/jmr3904dram.ld, |
| * mips/lsi.ld, mips/nullmon.ld, mips/pmon.ld: As for mips/array.ld. |
| |
| 2005-07-18 Shaun Jackman <sjackman@gmail.com> |
| |
| * libgloss/arm/libcfunc.c (abort): Call _exit instead of the RDI swi. |
| (alarm): Add the weak attribute. |
| (pause): New function. Return ENOSYS. |
| * libgloss/arm/syscalls.c (_getpid): Add the weak attribute. |
| (_fstat): Ditto. |
| (_stat): Ditto. |
| (_link): Ditto. Return ENOSYS. |
| (_unlink): Call the swi instead of returning -1. |
| (_raise): Add the weak attribute. Return ENOSYS. |
| (isatty): Rename to _isatty. Call the swi instead of returning 1. |
| (_system): Call the swi instead of returning ENOSYS. |
| (_rename): Ditto. |
| |
| 2005-07-06 Aldy Hernandez <aldyh@redhat.com> |
| |
| * configure.in: Add ms1 case. |
| * configure: Regenerate. |
| * ms1/16-002.ld: New. |
| * ms1/16-003.ld: New. |
| * ms1/64-001.ld: New. |
| * ms1/access.c: New. |
| * ms1/chmod.c: New. |
| * ms1/close.c: New. |
| * ms1/configure: New. |
| * ms1/configure.in: New. |
| * ms1/crt0-16-002.S: New. |
| * ms1/crt0-16-003.S: New. |
| * ms1/crt0-64-001.S: New. |
| * ms1/crt0.S: New. |
| * ms1/exit-16-002.c: New. |
| * ms1/exit-16-003.c: New. |
| * ms1/exit-64-001.c: New. |
| * ms1/exit.c: New. |
| * ms1/fstat.c: New. |
| * ms1/getpid.c: New. |
| * ms1/gettime.c: New. |
| * ms1/isatty.c: New. |
| * ms1/kill.c: New. |
| * ms1/lseek.c: New. |
| * ms1/Makefile.in: New. |
| * ms1/open.c: New. |
| * ms1/read.c: New. |
| * ms1/sbrk.c: New. |
| * ms1/startup-16-002.S: New. |
| * ms1/startup-16-003.S: New. |
| * ms1/startup-64-001.S: New. |
| * ms1/stat.c: New. |
| * ms1/time.c: New. |
| * ms1/times.c: New. |
| * ms1/trap.h: New. |
| * ms1/trap.S: New. |
| * ms1/unlink.c: New. |
| * ms1/utime.c: New. |
| * ms1/write.c: New. |
| |
| 2005-05-19 Corinna Vinschen <vinschen@redhat.com> |
| |
| * arm/elf-redboot.ld, iq2000/sim.ld, m68hc11/sim-valid-m68hc11.ld, |
| * m68hc11/sim-valid-m68hc12.ld, mcore/elf-cmb.ld, mips/cfe.ld, |
| * mips/ddb-kseg0.ld, mips/ddb.ld, mips/dve.ld, mips/idt.ld, |
| * mips/idt32.ld, mips/idt64.ld, mips/jmr3904app-java.ld, |
| * mips/jmr3904app.ld, mips/jmr3904dram-java.ld, mips/jmr3904dram.ld, |
| * mips/nullmon.ld, mips/pmon.ld, mn10200/eval.ld, mn10200/sim.ld, |
| * mn10300/asb2303.ld, mn10300/asb2305.ld, mn10300/eval.ld, |
| * mn10300/sim.ld, rs6000/ads.ld, rs6000/mbx.ld, rs6000/yellowknife.ld, |
| * sh/sh1lcevb.ld, sh/sh2lcevb.ld, sh/sh3bb.ld, sh/sh3lcevb.ld, |
| * sparc/elfsim.ld, sparc/ex930.ld, sparc/ex931.ld, sparc/ex934.ld, |
| * sparc/sparc86x.ld, xstormy16/eva_app.ld, xstormy16/eva_stub.ld, |
| * xstormy16/sim_high.ld, xstormy16/sim_rom.ld: Add .debug_ranges |
| section. |
| |
| 2005-05-05 Tobias Anderberg <tobias.anderberg@axis.com> |
| |
| * arm/syscalls.c (get_errno): Fix output register constraint. |
| |
| 2005-05-05 J"orn Rennecke <joern.rennecke@st.com> |
| |
| * rs6000/sim-getrusage.S: New file, broken out of: |
| (simulator.S). |
| * rs6000/Makefile.in (SIM_OBJS): Add sim-getrusage.o. |
| (sim-getrusage.o): New rule. |
| |
| 2005-04-28 Shaun Jackman <sjackman@gmail.com> |
| |
| * libgloss/syscalls.c (get_errno): Add an output register constraint. |
| |
| 2005-04-19 Eric Christopher <echristo@redhat.com> |
| |
| * mips/regs.S: Sign extend constants for mips64 and unify |
| address handling. |
| |
| 2005-04-12 Shaun Jackman <sjackman@gmail.com> |
| |
| * libgloss/arm/Makefile.in (RDPMON_BSP): librdpmon.a was empty due |
| to a typo. Fixed. |
| (RDIMON_BSP): Ditto. |
| |
| 2005-04-12 Richard Sandiford <rsandifo@redhat.com> |
| |
| * mips/array.ld, mips/cfe.ld, mips/dve.ld, mips/idt32.ld, |
| * mips/idt64.ld, mips/idtecoff.ld, mips/idt.ld, |
| * mips/jmr3904app-java.ld, mips/jmr3904app.ld, |
| * mips/jmr3904dram-java.ld, mips/jmr3904dram.ld, mips/lsi.ld, |
| * mips/nullmon.ld, mips/pmon.ld: Keep .init and .fini. |
| |
| 2005-02-08 Antony King <antony.king@st.com> |
| |
| * arm/syscalls.c: Change CHECK_INIT to pass reentrant struct |
| instead of file pointer. |
| |
| 2005-02-01 Hans-Peter Nilsson <hp@axis.com> |
| |
| * cris/Makefile.in (ALL_INSTALL_FILES): New macro. |
| (ALL_INSTALL_FILES_NEWLIB_COPY): New macro. |
| (all): Use ALL_INSTALL_FILES instead of its contents. Add |
| ALL_INSTALL_FILES_NEWLIB_COPY. |
| ($(objroot)/newlib/%, $(objroot)/newlib/libnosys.a): New rules |
| |
| 2005-01-27 Hans-Peter Nilsson <hp@axis.com> |
| |
| * configure.in: Support cris-*-* and crisv32-*-*. |
| * libnosys/configure.in: Ditto. |
| * configure, libnosys/configure: Regenerate. |
| * cris: New directory. |
| * cris/crt0.S, cris/crtn.c, cris/gensyscalls, cris/linunistd.h, |
| cris/outbyte.c, cris/configure.in, cris/crti.c, cris/lcrt0.c, |
| cris/Makefile.in, cris/setup.S, cris/configure: New files. |
| |
| 2005-01-21 Hans-Peter Nilsson <hp@axis.com> |
| |
| * libnosys/warning.h (stub_warning): Remove "warning: " prefix. |
| |
| 2005-01-18 Hans-Peter Nilsson <hp@axis.com> |
| |
| * libnosys/warning.h (link_warning) [HAVE_GNU_LD and HAVE_ELF]: |
| Prefix symbol in section name with __SYMBOL_PREFIX. Do not use |
| __make_section_unallocated. Mark magic variable as used. |
| |
| 2005-01-18 Hans-Peter Nilsson <hp@axis.com> |
| |
| * libnosys/configure.in (libc_cv_asm_previous_directive): Set |
| cache-id variable. |
| (libc_cv_asm_popsection_directive): Ditto. |
| (libc_cv_section_attributes): Ditto. |
| (libc_symbol_prefix): Rename from libc_dollar_prefix. Check for |
| "_" as well, and set __SYMBOL_PREFIX accordingly. |
| * libnosys/configure: Regenerate. |
| |
| 2005-01-18 Hans-Peter Nilsson <hp@axis.com> |
| |
| * libnosys/Makefile.in (LD, AS): Correct obsoleted suffix: Say |
| as-new and ld-new, not as.new and ld.new. |
| |
| 2005-01-14 Hans-Peter Nilsson <hp@axis.com> |
| |
| * libnosys/warning.h (__make_section_unallocated) |
| [HAVE_ASM_PREVIOUS_DIRECTIVE, HAVE_ASM_POPSECTION_DIRECTIVE]: Use "\n" |
| instead of ";" to delimit assembly lines. |
| |
| 2005-01-07 Paul Brook <paul@codesourcery.com> |
| |
| * arm/crt0.S: Call __libc_{init,fini}_array instead of |
| _init/_fini if they exist. |
| |
| 2004-11-26 Paul Brook <paul@codesourcery.com> |
| |
| * arm/crt0.S (_start): Add .cantunwind annotation. |
| |
| 2004-10-28 Nick Clifton <nickc@redhat.com> |
| |
| * configure.in: Add support for iq2000 target. |
| * configure: Regenerate. |
| |
| 2004-10-05 Tomer Levi <Tomer.Levi@nsc.com> |
| |
| * configure.in: Support crx-*-*. |
| * configure: regenerate. |
| * crx/_exit.c: New file. |
| * crx/_getenv.c: Ditto. |
| * crx/_rename: Ditto. |
| * crx/close.c: Ditto. |
| * crx/configure.in: Ditto. |
| * crx/crti.S: Ditto. |
| * crx/crtn.S: Ditto. |
| * crx/crt0.S: Ditto. |
| * crx/dvz_hndl.c: Ditto. |
| * crx/flg_hndl.c: Ditto. |
| * crx/fstat.c: Ditto. |
| * crx/getpid.c: Ditto. |
| * crx/iad_hndl.c: Ditto. |
| * crx/intable.c: Ditto. |
| * crx/isatty.c: Ditto. |
| * crx/kill.c: Ditto. |
| * crx/lseek.c: Ditto. |
| * crx/Makefile.in: Ditto. |
| * crx/open.c: Ditto. |
| * crx/putnum.c: Ditto. |
| * crx/read.c: Ditto. |
| * crx/sbrk.c: Ditto. |
| * crx/sim.ld: Ditto. |
| * crx/stat.c: Ditto. |
| * crx/svc_hndl.c: Ditto. |
| * crx/time.c: Ditto. |
| * crx/und_hndl.c: Ditto. |
| * crx/unlink.c: Ditto. |
| * crx/write.c: Ditto. |
| |
| 2004-10-01 Paul Brook <paul@codesourcery.com> |
| |
| * arm/configure.in: Add *-*-aebi target. |
| * arm/configure: Regenerate. |
| |
| 2004-08-25 Corinna Vinschen <vinschen@redhat.com> |
| |
| * i386/cygmon.ld (.text): Fix alignment. |
| (.rodata): Handle .rodata.* sections. |
| |
| 2004-06-27 Hideki Iwamoto <h-iwamoto@kit.hi-ho.ne.jp> |
| |
| * Makefile.in: Support $(DESTDIR). |
| * arm/Makefile.in: Ditto. |
| * d30v/Makefile.in: Ditto. |
| * doc/Makefile.in: Ditto. |
| * fr30/Makefile.in: Ditto. |
| * frv/Makefile.in: Ditto. |
| * hp74x/Makefile.in: Ditto. |
| * i386/Makefile.in: Ditto. |
| * i960/Makefile.in: Ditto. |
| * iq2000/Makefile.in: Ditto. |
| * libnosys/Makefile.in: Ditto. |
| * m32r/Makefile.in: Ditto. |
| * m68hc11/Makefile.in: Ditto. |
| * m68k/Makefile.in: Ditto. |
| * mcore/Makefile.in: Ditto. |
| * mips/Makefile.in: Ditto. |
| * mn10200/Makefile.in: Ditto. |
| * mn10300/Makefile.in: Ditto. |
| * pa/Makefile.in: Ditto. |
| * rs6000/Makefile.in: Ditto. |
| * sparc/Makefile.in: Ditto. |
| * sparc/libsys/Makefile.in: Ditto. |
| * xstormy16/Makefile.in: Ditto. |
| |
| 2004-06-25 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * libnosys/_exit.c: New file. |
| * libnosys/Makefile.in: Add _exit.o. |
| |
| 2004-06-17 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * arm/configure.in: Check the value of newlib-may-supply-syscalls |
| enablement variable to determine if crt0 should or should not be |
| built. |
| * arm/configure: Regenerated. |
| * arm/Makefile.in: Changed to look at @BUILD_CRT0_TRUE@ and |
| @BUILD_CRT0_FALSE@ variables set in configure to determine |
| if crt0.o should be built and installed. |
| |
| 2004-06-09 Toralf Lund <toralf@procaptura.com> |
| |
| * arm/crt0.S: Copied from newlib and it now also sets up stacks for |
| FIQ and IRQ mode, plus calls hardware_init_hook() and |
| software_init_hook() if present. |
| * arm/libcfunc.c, arm/swi.h, arm/syscalls.c: Copied |
| from newlib. |
| * arm/Makefile.in: Build crt0.o, rdpmon-crt0.o, rdimon-crt0.o, |
| librdpmon.a, librdimon.a - support file for "bare" setup, as well |
| as "RDP" and "RDI" monitors. |
| * arm/coff-rdpmon.specs, arm/elf-rdpmon.specs, |
| arm/coff-rdimon.specs, arm/elf-rdimon.specs: gcc specs files to go |
| with above mentioned support libs and startfiles. |
| |
| 2004-06-03 Alexandre Oliva <aoliva@redhat.com> |
| |
| * mn10300/sim.ld: Start at address 4, to avoid ambiguity with NULL |
| pointers. |
| |
| 2004-05-26 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * libnosys/sbrk.c: Add include of <_syslist.h> and "config.h". |
| |
| 2004-05-05 Richard Sandiford <rsandifo@redhat.com> |
| |
| * mips/array.ld, mips/cfe.ld, mips/ddb-kseg0.ld, mips/ddb.ld, |
| * mips/dve.ld, mips/idt32.ld, mips/idt64.ld, mips/idt.ld |
| * mips/jmr3904app.ld, mips/lsi.ld, mips/nullmon.ld, mips/pmon.ld |
| (.eh_frame_hdr, .eh_frame, .gcc_except_table, .jcr): New sections. |
| |
| 2004-04-02 Chris Demetriou <cgd@broadcom.com> |
| |
| * mips/regs.S (C0_COUNT): Fix comment that kept this from being |
| defined. |
| * mips/vr4300.S: Use C0_COUNT as appropriate instead of hardcoding $9. |
| * mips/vr5xxx.S: Likewise. |
| |
| 2004-03-23 Eric Christopher <echristo@redhat.com> |
| |
| * frv/crt0.S: Fix comment. |
| * mips/configure.in: Add mipsisa64-*-* to target support. |
| * mips/configure: Regenerate. |
| |
| 2004-03-03 Stephane Carrez <stcarrez@nerim.fr> |
| |
| * m68hc11/sci-inout.S: Supports -mlong-calls. |
| * m68hc11/sim-valid-m68hc11.ld (.tramp): New section for trampolines. |
| (.text): Mark the .installN and .finiN section with KEEP. |
| (.vectors): Likewise for .vectors. |
| (.gcc_except_table): New section. |
| * m68hc11/sim-valid-m68hc12.ld (.tramp): New section for trampolines. |
| (.text): Mark the .installN and .finiN section with KEEP. |
| (.vectors): Likewise for .vectors. |
| (.gcc_except_table): New section. |
| |
| 2004-01-23 Gábor Lóki <loki@inf.u-szeged.hu> |
| |
| * m68k/leds.c: remove led_putnum(), zylons() forward |
| function declarations. |
| * m68k/leds.h: add zylons() forward function declaration. |
| |
| 2004-01-06 Alexandre Oliva <aoliva@redhat.com> |
| |
| 2003-12-02 Richard Sandiford <rsandifo@redhat.com> |
| * frv/crt0.S (_start): Fix use of FDPIC conditionals. Move the set of |
| gr11 outside the FDPIC conditional. Avoid clobbering gr4 too early. |
| 2003-11-14 Richard Sandiford <rsandifo@redhat.com> |
| * frv/crt0.S: Fix fdpic sp calculation. |
| 2003-11-05 Alexandre Oliva <aoliva@redhat.com> |
| * frv/crt0.S: Use __stacksize, not __stack, to initialize sp on |
| FDPIC. Update comments on computing _GLOBAL_OFFSET_TABLE_. Don't |
| fixup ctors nor dtors on FDPIC. |
| 2003-09-19 Alexandre Oliva <aoliva@redhat.com> |
| * frv/crt0.S (_start): Set up gr15 only for FDPIC. |
| * frv/crt0.S (_start): Save _GLOBAL_OFFSET_TABLE_ in gr17, and set |
| gr15 before function calls. |
| 2003-09-19 DJ Delorie <dj@redhat.com>, Alexandre Oliva <aoliva@redhat.com> |
| * frv/crt0.S (_start): Set up gr15 with _GLOBAL_OFFSET_TABLE_'s |
| value. |
| |
| 2003-10-27 Bernardo Innocenti <bernie@develer.com> |
| |
| * m68k/asm.h: Add macros for -fPIC, -msep-data and |
| -mid-shared-library support. |
| * m68k/crt0.S: Use macros for -fPIC, -msep-data and |
| -mid-shared-library support. |
| * m68k/sim-crt0.S: Likewise. |
| |
| 2003-10-15 Bernardo Innocenti <bernie@develer.com> |
| |
| * m68k/sim-funcs.c (_XOPEN_SOURCE): Define to get the pid_t |
| typedef from <unistd.h>. |
| |
| 2003-08-26 Jason Merrill <jason@redhat.com> |
| |
| * sparc/elfsim.ld: Fix __EH_FRAME_BEGIN__ definition. |
| * sparc/sparc86x.ld: Likewise. |
| |
| 2003-08-20 Chris Demetriou <cgd@broadcom.com> |
| |
| * mips/crt0_cfe.S: New file. |
| * mips/cfe_mem.c: New file. |
| * mips/cfe_prestart.S: Remove. |
| * mips/cfe.ld: Adjust to use crt0_cfe.o as the startup file, and |
| and use _start as the entry point. Align BSS to 32-byte boundary. |
| * mips/cfe.c: Reimplement to fit on top of a crt0_cfe.o file. |
| * mips/cfe_api.h (__libcfe_stack_size, __libcfe_mem_limit) |
| (__libcfe_meminit, __libcfe_stack_top): New prototypes. |
| * mips/Makefile.in (CFEOBJS): Replace cfe_prestart.o with cfe_mem.o. |
| (cfe.o, cfe_api.o, cfe_mem.o, crt0_cfe.o): New targets. |
| * mips/configure.in: Build and install crt0_cfe.o when CFE support |
| is built. |
| * mips/configure: Regenerate. |
| |
| 2003-08-12 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * i386/cygmon-salib.c (unlink): New stub. |
| |
| 2003-08-08 Mark Salter <msalter@redhat.com> |
| |
| * i386/cygmon.ld: Add 4 byte alignment to __CTOR_LIST__ |
| |
| Bernd Schmidt <bernds@redhat.com> |
| |
| * i386/cygmon.ld: Add entry for .rodata. |
| |
| 2003-07-14 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com> |
| |
| * m32r/configure.in: fixed bug to delete ../config-ml.in. |
| |
| 2003-07-10 Alexandre Oliva <aoliva@redhat.com> |
| |
| 2001-10-30 Jeff Johnston <jjohnstn@redhat.com> |
| * mn10300/asb2305.ld: Added ASB2305 support. |
| * mn10300/configure: Ditto. |
| * mn10300/configure.in: Ditto. |
| 2001-09-12 Stan Cox <scox@redhat.com> |
| * mn10300/asb2303.ld: New file. Linker script for the ASB2303 |
| AM33/2.00 board. |
| * mn10300/configure.in: Add support for asb2303 board script. |
| |
| 2003-07-08 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * configure.in: Reapply Kazuhiro Inaoko's multilib patch from |
| 04-17-03. |
| * configure: Regenerated. |
| |
| 2003-06-23 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com> |
| |
| * m32r/crt0.S (_start): Allow _stack to be placed anywhere |
| in memory. |
| |
| 2003-06-06 Stan Cox <scox@redhat.com> |
| Jeff Johnston <jjohnstn@redhat.com> |
| Anthony Green <green@redhat.com> |
| |
| * configure.in: Add iq2000 support. |
| * configure: Rebuilt. |
| * iq2000/Makefile.in, iq2000/access.c, iq2000/_exit.c, |
| iq2000/configure, iq2000/chmod.c, iq2000/chown.c, iq2000/close.c, |
| iq2000/configure.in, iq2000/creat.c, iq2000/crt0.S, iq2000/crt1.c, |
| iq2000/execv.c, iq2000/execve.c, iq2000/fork.c, iq2000/fstat.c, |
| iq2000/getpid.c, iq2000/gettime.c, iq2000/isatty.c, iq2000/kill.c, |
| iq2000/lseek.c, iq2000/open.c, iq2000/pipe.c, iq2000/read.c, |
| iq2000/sbrk.c, iq2000/sim.ld, iq2000/stat.c, iq2000/test.c, |
| iq2000/time.c, iq2000/times.c, iq2000/trap.c, iq2000/trap.h, |
| iq2000/unlink.c, iq2000/utime.c, iq2000/wait.c, iq2000/write.c: |
| New files. |
| |
| 2003-05-27 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * libnosys/Makefile.in: Add errno.o. |
| * libnosys/errno.c: New file to supply errno definition if |
| one not provided yet. |
| |
| 2003-05-26 Eric Christopher <echristo@redhat.com> |
| |
| * mips/crt0.S: Remove stackbase variable set. |
| |
| 2003-05-02 Eric Christopher <echristo@redhat.com> |
| |
| * mips/cma101.c (__sizemem): Make sure that end is not in .sdata. |
| |
| 2003-04-29 Nick Clifton <nickc@redhat.com> |
| |
| * libnosys/sbrk.c: Remove unnecessary #include's. |
| Change return type of _sbrk() function to void * to match |
| definition in system header files. |
| Fix formatting. |
| |
| 2003-04-23 Andrew Haley <aph@cambridge.redhat.com> |
| |
| * xstormy16/sim_rom.ld: New. |
| * xstormy16/Makefile.in (SIM_SCRIPTS): Add sim_rom.ld. |
| * xstormy16/crt0.s (_int_reset): Copy ROM data to RAM. |
| * xstormy16/eva_app.ld (_rdata, _data): New. |
| * xstormy16/sim_high.ld (_rdata, _data): New. |
| |
| 2003-04-17 Inaoka Kazuhiro <inaoka.kazuhiro@renesas.com> |
| |
| * m32r/Makefile.in: Add multilib support. |
| * m32r/configure.in: Ditto. |
| * m32r/configure: Regenerated. |
| |
| 2003-04-16 Nick Clifton <nickc@redhat.com> |
| |
| * xstormy16/sim_high.ld: Add .jcr section mapping. |
| * xstormy16/eva_stub.ld: Likewise. |
| * xstormy16/eva_app.ld: Likewise. |
| |
| 2003-04-09 Chris Demetriou <cgd@broadcom.com> |
| |
| * mips/cfe.c (_flush_cache): New function. |
| |
| 2003-02-18 Richard Sandiford <rsandifo@redhat.com> |
| |
| * mips/nullmon.c (_ftext, _end): Adjust declaration. |
| (get_mem_info): Rework. |
| |
| 2003-02-18 Richard Sandiford <rsandifo@redhat.com> |
| |
| * mips/crt0.S (zerobss): Reload __memsize after call. |
| |
| 2003-02-17 Chris Demetriou <cgd@broadcom.com> |
| |
| * mips/cfe.c (__cfe_handle, __cfe_entrypt): Fix types. |
| |
| 2003-02-05 Chris Demetriou <cgd@broadcom.com> |
| |
| * mips/configure.in (mipsisa32el-*-*): Handle in the same way |
| as mipsisa32-*-*. |
| (mipsisa32r2-*-*, mipsisa32r2el-*-*): New, handled in the same |
| way as mipsisa32-*-*. |
| * mips/configure: Regenerate. |
| |
| 2003-02-05 Chris Demetriou <cgd@broadcom.com> |
| |
| * mips/cfe.c (hardware_hazard_hook): Move... |
| * mips/cfe_prestart.S (hardware_hazard_hook): To here, |
| and translate into assembly. |
| |
| 2003-01-08 Richard Sandiford <rsandifo@redhat.com> |
| |
| * mips/crt0.S (_start): Allocate 64 bytes of stack instead of 32. |
| Pass an empty argv and envp to main(). |
| |
| 2003-01-08 Richard Sandiford <rsandifo@redhat.com> |
| |
| * mips/configure.in (mips64vr-elf, mips64vrel-elf): New config. |
| * mips/configure: Regenerate. |
| |
| 2003-01-07 Chris Demetriou <cgd@broadcom.com> |
| |
| * crt0.S: Check for definition of __mips64 rather than |
| checking (__mips < 3). |
| * pmon.S: Likewise. |
| * cygmon.c (sysCall): Avoid multi-line string literals. |
| |
| 2002-11-12 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * mips/Makefile.in: Add cygmon support. |
| * mips/configure.in: Ditto. |
| * mips/configure: Regenerated. |
| * mips/crt0_cygmon.S: New file. |
| * mips/cygmon.c: Ditto. |
| * mips/pmon.S: Minor formatting and copyright changes. |
| * mips/crt0.S: Ditto. |
| |
| 2002-11-08 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * arm/Makefile.in: Add support for new pid specs. |
| * arm/coff-iq80310.specs: Change to allow future support. |
| * arm/elf-iq80310.specs: Ditto. |
| * arm/elf-redboot.specs: Ditto. |
| * arm/coff-redboot.ld: Add EH frame support. |
| * arm/redboot-crt0.S: Add optional code to clear bss without |
| memset. |
| * arm/coff-pid.specs: New file. |
| * arm/elf-pid.specs: New file. |
| |
| 2002-11-08 Jeff Johnston <jjohnstn@redhat.com> |
| Catherine Moore <clm@redhat.com> |
| |
| * m32r/configure.in: Do not require gcc to be able to link an |
| executable. |
| * m32r/configure: Regenerate. |
| * m32r/Makefile.in: Directly reference gdbstub. |
| |
| 2002-10-25 Bernd Schmidt <bernds@redhat.com> |
| |
| * i386/cygmon.ld: Add entry for .gcc_except_table. |
| |
| 2000-10-25 Mark Salter <msalter@redhat.com> |
| |
| * i386/cygmon-crt0.S: Use __USER_LABEL_PREFIX__ for symbols. Always |
| use __start for start symbol. |
| * i386/cygmon-salib.c: Don't build __do_global_[cd]tors for AOUT. |
| Disable file I/O extensions to make Plum Hall happy. |
| * i386/cygmon.ld: Set __start as entry point. |
| * i386/Makefile.in: Support IS_AOUT. |
| * i386/configure.in: Support IS_AOUT. |
| * i386/configure: Regenerated. |
| * i386/cygmon-salib.c: |
| * i386/cygmon-gmon.c (_mcount): It's _etext. |
| |
| 2002-10-25 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * configure.in: Clarify some of the triplets so unsupported |
| configurations don't pass through. |
| * configure: Regenerated. |
| |
| 2002-10-18 Stephane Carrez <stcarrez@nerim.fr> |
| |
| * m68hc11/syscalls.c (sbrk): Use ptrdiff_t for increment parameter. |
| |
| 2002-10-07 Richard Sandiford <rsandifo@redhat.com> |
| |
| * mips/ddb.ld: KEEP .init and .fini. |
| * mips/ddb-kseg0.ld: Likewise. |
| |
| 2002-10-04 Michael Snyder <msnyder@redhat.com> |
| |
| * m32r/m32r-lib.c (exceptionHandler): Fix computation of |
| exception vector address, as suggested by Mitsubishi. |
| (getExceptionVector): Ditto. |
| |
| 2002-08-01 Chris Demetriou <cgd@broadcom.com> |
| |
| * mips/cfe.ld (STARTUP): New definition. |
| * mips/ddb-kseg0.ld (STARTUP): Likewise. |
| * mips/ddb.ld (STARTUP): Likewise. |
| * mips/dve.ld (STARTUP): Likewise. |
| * mips/idt.ld (STARTUP): Likewise. |
| * mips/jmr3904app-java.ld (STARTUP): Likewise. |
| * mips/jmr3904app.ld (STARTUP): Likewise. |
| * mips/jmr3904dram-java.ld (STARTUP): Likewise. |
| * mips/jmr3904dram.ld (STARTUP): Likewise. |
| * mips/lsi.ld (STARTUP): Likewise. |
| * mips/nullmon.ld (STARTUP): Likewise. |
| * mips/pmon.ld (STARTUP): Likewise. |
| |
| 2002-07-23 Stephane Carrez <stcarrez@nerim.fr> |
| |
| * README: Mention 68HC11/68HC12 support. |
| * configure.in: Recognize m6811-elf and m6812-elf. |
| * configure: Regenerated. |
| * m68hc11/Makefile.in: New file. |
| * m68hc11/configure.in: New file. |
| * m68hc11/configure: New file. |
| * m68hc11/crt0.S: New file. |
| * m68hc11/sci-inout.S: New file for 68hc11/68hc12 sio. |
| * m68hc11/sim-valid-m68hc11.ld: New file. |
| * m68hc11/sim-valid-m68hc12.ld: New file. |
| * m68hc11/syscalls.c: New file. |
| |
| 2002-07-22 Aldy Hernandez <aldyh@redhat.com> |
| |
| * rs6000/simulator.S (gettimeofday): New. |
| (getrusage): New. |
| |
| 2002-07-18 Chris Demetriou <cgd@broadcom.com> |
| |
| * read.c (read): Don't assign past end of buffer, fix return value. |
| |
| 2002-07-12 Chris Demetriou <cgd@broadcom.com> |
| |
| * mips/Makefile.in (GENOBJS2): New variable to name other |
| commonly used objects. |
| (DVEOBJS, JMR3904OBJS): Reference GENOBJS2. |
| |
| * mips/Makefile.in: Add support for Broadcom CFE firmware. |
| * mips/configure.in: (mipsisa32*-*-*, *): Likewise. |
| * mips/configure: Regenerate. |
| * mips/cfe.c: New file. |
| * mips/cfe.ld: New file. |
| * mips/cfe_api.c: New file. |
| * mips/cfe_api.h: New file. |
| * mips/cfe_api_int.h: New file. |
| * mips/cfe_error.h: New file. |
| * mips/cfe_prestart.S: New file. |
| |
| 2002-07-12 Chris Demetriou <cgd@broadcom.com> |
| |
| * mips/array.ld (hardware_exit_hook, hardware_hazard_hook): New |
| symbols for optionally-provided functions. |
| * mips/ddb-kseg0.ld: Likewise. |
| * mips/ddb.ld: Likewise. |
| * mips/dve.ld: Likewise. |
| * mips/idt.ld: Likewise. |
| * mips/idt32.ld: Likewise. |
| * mips/idt64.ld: Likewise. |
| * mips/idtecoff.ld: Likewise. |
| * mips/jmr3904app-java.ld: Likewise. |
| * mips/jmr3904app.ld: Likewise. |
| * mips/jmr3904dram-java.ld: Likewise. |
| * mips/jmr3904dram.ld: Likewise. |
| * mips/lsi.ld: Likewise. |
| * mips/nullmon.ld: Likewise. |
| * mips/pmon.ld: Likewise. |
| * mips/crt0.S: Invoke hardware_exit_hook and hardware_hazard_hook |
| functions if they are provided. |
| (_exit): Handle __embedded_pic properly. |
| |
| 2002-06-18 Dave Brolley <brolley@redhat.com> |
| |
| From Catherine Moore, Michael Meissner, Richard Sandiford: |
| * configure.in: Support frv*-*-*. |
| * frv/Makefile.in: New file. |
| * frv/configure: New file. |
| * frv/configure.in: New file. |
| * frv/crt0.S: New file. |
| * frv/fstat.c: New file. |
| * frv/getpid.c: New file. |
| * frv/isatty.c: New file. |
| * frv/kill.c: New file. |
| * frv/print.c: New file. |
| * frv/putnum.c: New file. |
| * frv/sbrk.c: New file. |
| * frv/sim-close.S: New file. |
| * frv/sim-exit.S: New file. |
| * frv/sim-inbyte.c: New file. |
| * frv/sim-lseek.S: New file. |
| * frv/sim-open.S: New file. |
| * frv/sim-read.S: New file. |
| * frv/sim-time.c: New file. |
| * frv/sim-unlink.S: New file. |
| * frv/sim-write.S: New file. |
| * frv/stat.c: New file. |
| |
| 2002-05-11 Thomas Fitzsimmons <fitzsim@redhat.com> |
| |
| * libnosys/acconfig.h (HAVE_SECTION_ATTRIBUTES): New macro. |
| * libnosys/configure.in: Check gcc's support for section attributes. |
| * libnosys/warning.h: Have link_warning expand to nothing if gcc |
| does not support section attributes. |
| |
| 2002-04-22 Jonathan Larmour <jlarmour@redhat.com> |
| |
| * arm/syscall.h: New file. To define extra syscall values for RedBoot. |
| |
| * arm/redboot-syscalls.c (_close): Fix setting of errno value. |
| (_lseek): Ditto. |
| (_open): Ditto. |
| (_write): Ditto. |
| (_read): Ditto. |
| (_rename): New function. |
| (_system): Ditto. |
| (_stat): Ditto. |
| (_unlink): Call a syscall for this now. |
| (isatty): Ditto. |
| (_fstat): Ditto. |
| (_gettimeofday): Ditto. |
| |
| 2002-04-17 Joel Sherrill <joel@OARcorp.com> |
| |
| * debug.h: Change mem_err to volatile to match definition in |
| debug.c. |
| |
| 2002-04-17 Joel Sherrill <joel@OARcorp.com> |
| |
| * sparc/cygmon-salib.c, sparc/erc32-stub.c: Don't use multi-line |
| strings. |
| |
| 2002-04-16 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * m68k/configure.in: Change to use LIB_AC_PROG_CC instead |
| of AC_PROG_CC to avoid building an executable in configuration. |
| * m68k/configure: Regenerated. |
| |
| 2002-04-15 Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * d30v/syscalls.c: #include <time.h>. Don't use multi-line |
| strings. |
| |
| 2002-04-15 Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * m32r/trapmon0.c (__trap0): Don't use multi-line strings. |
| |
| 2002-02-05 Mark Salter <msalter@redhat.com> |
| |
| * arm/elf-iq80310.specs: Ditto. |
| * arm/elf-redboot.specs: Ditto. |
| * arm/elf-redboot.ld: Fix eh_frame sections. Add .jcr section. |
| * arm/redboot-crt0.S: Add support for __USES_INITFINI__. |
| |
| 2002-02-01 Geoffrey Keating <geoffk@redhat.com> |
| |
| * xstormy16/Makefile.in (SIM_OBJS): Remove sbrk.o, add |
| sim_malloc_start.o. |
| * xstormy16/eva_app.ld: Add __malloc_start. |
| * xstormy16/sbrk.c: Remove. |
| * xstormy16/sim_malloc_start.s: New file. |
| * xstormy16/sim_high.ld: Make the stack start immediately at the |
| end of the program. |
| |
| 2002-02-01 Michael Meissner <meissner@redhat.com> |
| |
| * mips/cma101.c (__sizemem_default): Allow user to specify the |
| memory size. |
| (__sizemem): Use it. |
| |
| 2002-01-24 Mark Salter <msalter@redhat.com> |
| |
| * arm/redboot-crt0.S: Use __get_memtop to put stack in high memory. |
| |
| * arm/redboot-syscalls.c (_times): Unconditionally use SYS_times. |
| (__get_memtop): New funtion to return top of memory. |
| |
| 2002-01-15 Mark Salter <msalter@redhat.com> |
| |
| * xstormy16/eva_stub.ld: Provide interrupt routine symbols which |
| forward interrupts to user application vectors. |
| |
| * xstormy16/crt0_stub.s: Remove default interrupt routines. |
| |
| * xstormy16/Makefile.in: Rename stub app to eva_stub.elf and |
| add it to install list. |
| |
| 2002-01-07 Mark Salter <msalter@redhat.com> |
| |
| * configure.in: Add support for arm, strongarm, and xscale. |
| * configure: Regenerated. |
| * arm/coff-iq80310.specs: New file. |
| * arm/coff-redboot.ld: New file. |
| * arm/coff-redboot.specs: New file. |
| * arm/configure: New file. |
| * arm/configure.in: New file. |
| * arm/elf-iq80310.specs: New file. |
| * arm/elf-redboot.ld: New file. |
| * arm/elf-redboot.specs: New file. |
| * arm/Makefile.in: New file. |
| * arm/redboot-crt0.S: New file. |
| * arm/redboot-syscalls.c: New file. |
| |
| 2001-12-22 Geoffrey Keating <geoffk@redhat.com> |
| Mark Salter <msalter@redhat.com> |
| Catherine Moore <clm@redhat.com> |
| Richard Henderson <rth@redhat.com> |
| |
| * configure.in: Add xstormy16. |
| * libnosys/configure.in: Add xstormy16. |
| * configure: Regenerated. |
| * libnosys/configure: Regenerated. |
| * xstormy16/Makefile.in: New file. |
| * xstormy16/close.c: New file. |
| * xstormy16/configure: New file. |
| * xstormy16/configure.in: New file. |
| * xstormy16/crt0.s: New file. |
| * xstormy16/crt0_stub.s: New file. |
| * xstormy16/crti.s: New file. |
| * xstormy16/crtn.s: New file. |
| * xstormy16/eva_app.c: New file. |
| * xstormy16/eva_app.ld: New file. |
| * xstormy16/eva_stub.ld: New file. |
| * xstormy16/fstat.c: New file. |
| * xstormy16/getpid.c: New file. |
| * xstormy16/kill.c: New file. |
| * xstormy16/lseek.c: New file. |
| * xstormy16/open.c: New file. |
| * xstormy16/sbrk.c: New file. |
| * xstormy16/sim_high.ld: New file. |
| * xstormy16/stat.c: New file. |
| * xstormy16/syscalls.S: New file. |
| * xstormy16/syscalls.m4: New file. |
| * xstormy16/unlink.c: New file. |
| * xstormy16/xstormy16_stub.c: New file. |
| |
| 2001-10-31 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * m32r/Makefile.in: Use gdb stub set by configure. |
| * m32r/configure.in: Add a special macro for testing |
| c compiler without building executable. Add setting of |
| GDBSTUB. |
| * m32r/configure: Regenerated. |
| |
| 2001-10-31 David Howells <dhowells@redhat.com> |
| |
| * syscall.h: Added SYS_times, SYS_gettimeofday, SYS_link values. |
| * mn10300/times.c: Renamed "times" to "_times" so that it can be |
| referenced by newlib. |
| * mn10300/cygmon.c: New file. |
| * mn10300/crt0_redboot.S: Ditto. |
| * mn10300/crt0_cygmon.S: Ditto. |
| * mn10300/Makefile.in: Added RedBoot and Cygmon support. |
| * mn10300/configure.in: Changed to allow for future |
| evaluation boards to be added. |
| * mn10300/configure: Regenerated. |
| |
| 2001-10-17 Michael Meissner <meissner@redhat.com> |
| |
| * regs.S (K0BASE_ADDR,K1BASE_ADDR): Define as addresses to |
| identify if a program is running in kernel segment 0. |
| |
| * cma101.c (__sizemem): If we are running in kernel segment 0, |
| instead of kernel segment 1, use kernel segment 0 addresses which |
| are uncached when sizing memory. |
| |
| * ddb-kseg0.ld: New file, clone of ddb.ld, except it links the |
| program to run in kernel segment 0, instead of kernel segment 1. |
| |
| * configure.in: Treat ddb-kseg0.ld like ddb.ld. |
| * configure: Regenerate. |
| |
| 2001-09-15 Eric Christopher <echristo@redhat.com> |
| |
| * mips/configure.in (LIB_AC_PROG_CC): Fix typo in mipsisa32 to |
| mipsisa32*. |
| * mips/configure: Regenerate. |
| |
| 2001-09-14 Eric Christopher <echristo@redhat.com> |
| |
| * mips/configure.in: Add mipsisa32 support. |
| * mips/configure: Regenerate. |
| * mips/idt32.ld: New file. |
| * mips/idt64.ld: New file. |
| |
| 2001-09-11 Michael Meissner <meissner@redhat.com> |
| |
| * mips/crt0.S (_start): If -mfp32, don't enable 64-bit floating |
| point registers, even if we are compiling for a mips3 or greater. |
| |
| 2001-09-10 Jim Blandy <jimb@redhat.com> |
| |
| Add support for GDB monitor-style I/O. |
| * m68k/idp-outbyte.c (raw_outbyte): Renamed from outbyte; made |
| static. |
| (outbyte): Call raw_outbyte; if GDB_MONITOR_OUTPUT is #defined, |
| precede the byte with a ^O character. |
| * m68k/idpgdb.ld: New linker script. |
| * m68k/Makefile.in (IDPGDB_LDFLAGS, IDPGDB_BSP, IDPGDB_OBJS): New |
| variables. |
| (all): Add ${IDPGDB_BSP} to the list of things to build. |
| (${IDPGDB_BSP}, idp-gdb-outbyte.o, idpgdb-test.x, |
| idpgdb-test.srec, idpgdb-test.dis, idpgdb-test): New rules. |
| (install): Install the IDPGDB stuff, too. |
| |
| 2001-08-30 Richard Henderson <rth@redhat.com> |
| Eric Christopher <echristo@redhat.com> |
| |
| * mips/crt0.S: Fix for .init/.fini sections. |
| |
| 2001-08-30 Richard Henderson <rth@redhat.com> |
| Eric Christopher <echristo@redhat.com> |
| |
| * mips/idt.ld: Rewrite for .init/.fini sections. |
| |
| 2001-08-22 Jonathan Larmour <jlarmour@redhat.com> |
| |
| * mips/Makefile.in (jmr3904-io.o): Remove bogus use of `-mips3.' |
| |
| 2001-07-18 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * hp74x/configure: Regenerated with current autoconf. |
| * m32r/configure: Ditto. |
| * m68k/configure: Ditto. |
| * pa/configure: Ditto. |
| * sparc/configure: Ditto. |
| |
| 2001-03-08 Geoffrey Keating <geoffk@redhat.com> |
| |
| * rs6000/simulator.S (dup): New syscall. |
| |
| 2001-02-28 Will Cohen <wcohen@redhat.com> |
| |
| * src/libgloss/m68k/Makefile.in: Updated copyright and |
| added rules to build simulator related libraries. |
| (SIM_SCRIPTS): New variable. |
| (SIM_LDFLAGS): New variable. |
| (SIM_BSP): New variable. |
| (SIM_CRT0): New variable. |
| (SIM_OBJS): New variable. |
| (SIM_TEST): New variable. |
| (SIM_INSTALL): new variable. |
| * src/libgloss/m68k/sim-abort.c: New file. |
| * src/libgloss/m68k/sim-crt0.S: New file. |
| * src/libgloss/m68k/sim-errno.c: New file. |
| * src/libgloss/m68k/sim-funcs.c: New file. |
| * src/libgloss/m68k/sim-inbyte.c: New file. |
| * src/libgloss/m68k/sim-print.c: New file. |
| * src/libgloss/m68k/sim-sbrk.c: New file. |
| * src/libgloss/m68k/sim.ld: New file. |
| * src/libgloss/m68k/simulator.S: New file. |
| |
| 2001-02-22 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * mn10200/access.c: With DJ Delorie's permission, this code is |
| now freely modifiable with no reference to "copying.dj". |
| * mn10300/access.c: Ditto. |
| |
| 2001-02-06 Will Cohen <wcohen@redhat.com> |
| |
| * rs6000/sim-errno.c (__errno): Removed. |
| (_cerror): Use re-entrant version of errno. |
| |
| 2000-09-05 Geoff Keating <geoffk@cygnus.com> |
| |
| * rs6000/simulator.S: Use conditional returns for documentation |
| purposes. |
| (access): Add new syscall. |
| |
| Wed May 24 16:47:12 2000 Alexandre Oliva <aoliva@cygnus.com> |
| |
| * mn10300/time.c (time): Set *tloc, since the sim doesn't. |
| |
| Mon Jan 31 18:45:26 2000 Donald Lindsay <dlindsay@cygnus.com> |
| |
| * mips/crt0.S: If compiled into a mips2 multilib, sets processor |
| status register for 32 bit addressing |
| * mips/regs.S: Add symbols for status and config register fields. |
| * mips/vr5xxx.S: Variant of vr300.S with extensions to __cpu_flush() |
| to cope with Vr5000 secondary cache and with Vr5432 CACHE instruction. |
| * mips/Makefile.in: Add rule for forming vr5xxx.o. |
| * mips/configure.in: Add case arm for mips64vr5000 since the |
| default (which was previously used) should not get vr5xxx.o. |
| |
| Wed Dec 22 19:08:09 1999 Christopher Faylor <cgf@cygnus.com> |
| |
| * wince/Makefile.am: Use LDADD from configure. |
| * wince/Makefile.in: Regenerate. |
| * wince/configure.in: Determine libraries needed based (crudely) on |
| target. |
| * wince/configure: Regenerate. |
| |
| 1999-12-16 Tom Tromey <tromey@cygnus.com> |
| |
| * mips/Makefile.in (jmr3904-io.o): Don't compile with `-mips3'. |
| |
| * mips/jmr3904-io.c: Actually completed merge of Andrew Haley's |
| patch of 1998-11-23. |
| |
| * mips/jmr3904dram-java.ld: Provide _Jv_QthreadsStackSize. Link |
| against -lgcjcoop, not -lqthreads. |
| * mips/jmr3904app-java.ld: Provide _Jv_QthreadsStackSize. |
| |
| 1999-12-16 Brendan Kehoe <brendan@cygnus.com> |
| |
| * m68k/idp.ld: Only use specific .dtors and .ctors uses of KEEP, |
| without the bits for __{C,D}TOR_{LIST,END}__. |
| |
| 1999-12-14 Geoff Keating <geoffk@cygnus.com> |
| |
| * m68k/idp.ld (.text): Put crtbegin at the start of the |
| constructors and destructors. |
| |
| Mon Nov 29 12:14:48 1999 Christopher Faylor <cgf@cygnus.com> |
| |
| * wince/Makefile.am: Add missing gdbdir assignment. |
| * wince/Makefile.in: Regenerate. |
| |
| 1999-11-22 Gavin Romig-Koch <gavin@cygnus.com> |
| |
| * mips/idt.ld: Remove the OUTPUT_ARCH("mips:4000") directive. |
| |
| 1999-11-15 Nick Clifton <nickc@cygnus.com> |
| |
| * configure.in: Add arm-wince-pe target. |
| * configure: Regenerate. |
| |
| 1999-11-11 Brendan Kehoe <brendan@cygnus.com> |
| |
| * sparc/elfsim.ld (.text): Also provide __EH_FRAME_BEGIN__ since we're |
| not bringing in crtbegin.o. |
| * sparc/sparc86x.ld (.text): Likewise. Add initp support. |
| |
| 1999-10-30 Geoffrey Keating <geoffk@cygnus.com> |
| |
| * mips/crt0.S: Handle -membedded-pic properly. Set the $gp much |
| earlier because it'll be needed. Set the high bits of the PC to |
| be consistent with other pointers, so that exception handling |
| doesn't get confused. |
| |
| 1999-09-27 Jonathan Larmour <jlarmour@cygnus.co.uk> |
| |
| * sparc/crt0.s: Delete. This file is obsolete and caused problems |
| on case-insensitive windows filesystems. |
| |
| Wed Sep 22 15:59:17 1999 Christopher Faylor <cgf@cygnus.com> |
| |
| * configure.in: Generalize Windows CE target detection. |
| * configure: Regenerate. |
| * wince/Makefile.am: Rename CE stub filename. |
| * wince/Makefile.in: Regenerate. |
| * wince/configure.in: Allow changing of CE stub. |
| * wince/configure: Regenerate. |
| |
| 1999-07-26 Andrew Haley <aph@cygnus.com> |
| |
| * m32r/crt0.S (_start): Use a full word immediate for __bss_start |
| and _end to allow them to be placed anywhere in memory. |
| |
| 1999-07-08 Jason Merrill <jason@yorick.cygnus.com> |
| |
| * sparc/elfsim.ld: Provide initp support. |
| |
| 1999-06-22 Nick Clifton <nickc@cygnus.com> |
| |
| * mips/dve.ld (.rdata): Rename section to .rodata. |
| * mips/idt.ld (.rdata): Rename section to .rodata. |
| * mips/jmr3904app-java.ld (.rdata): Rename section to .rodata. |
| * mips/jmr3904app.ld (.rdata): Rename section to .rodata. |
| * mips/lsi.ld (.rdata): Rename section to .rodata. |
| * mips/nullmon.ld (.rdata): Rename section to .rodata. |
| * mips/pmon.ld (.rdata): Rename section to .rodata. |
| * mips/r5900.ld (.rdata): Rename section to .rodata. |
| * mips/sky.ld (.rdata): Rename section to .rodata. |
| * mips/vpu.ld (.rdata): Rename section to .rodata. |
| |
| Tue Jun 01 16:57:46 1999 Jeff Johnston <jjohnstn@cygnus.com> |
| |
| * libnosys/configure.in: Added setting of ac_file |
| prior to calling config-ml.in. |
| * libnosys/configure: Regenerated. |
| * libnosys/Makefile.in: Added code to make install directory |
| for libnosys.a prior to installing. |
| |
| Wed May 26 17:22:46 1999 Christopher Faylor <cgf@cygnus.com> |
| |
| * Makefile.am: Expect the object file to be in the |
| current directory. |
| * Makefile.in: Regenerate. |
| |
| Tue May 25 14:35:21 1999 Christopher Faylor <cgf@cygnus.com> |
| |
| * configure.in: Add wince targest. |
| * configure: Regenerate. |
| * wince: New directory |
| * wince/Makefile.am: New file. |
| * wince/Makefile.in: New file. |
| * wince/aclocal.m4: New file. |
| * wince/configure: New file. |
| * wince/configure.in: New file. |
| |
| 1999-05-24 Jim Wilson <wilson@cygnus.com> |
| |
| * sparc/elfsim.ld: Add `.data.*'. |
| |
| 1999-05-22 Jason Merrill <jason@yorick.cygnus.com> |
| |
| * m68k/idp.ld: Add initp support. |
| * sparc/cygmon.ld.src: Likewise. |
| |
| 1999-05-14 Nick Clifton <nickc@cygnus.com> |
| |
| * mcore/syscalls.S (_sbrk): Round to 8 bytes not 4. |
| |
| 1999-05-13 Mark Salter <msalter@cygnus.com> |
| |
| * mcore/configure.in: Fixed multilib support. |
| * mcore/configure: Regenerated. |
| * mcore/Makefile.in: Fixed multilib problems. |
| Added cmb board support |
| * mcore/close.c: New file. |
| * mcore/cmb-exit.c: Ditto. |
| * mcore/cmb-inbyte.c: Ditto. |
| * mcore/cmb-outbyte.c: Ditto. |
| * mcore/elf-cmb.ld: Ditto. |
| * mcore/elf-cmb.specs: Ditto. |
| * mcore/fstat.c: Ditto. |
| * mcore/getpid.c: Ditto. |
| * mcore/kill.c: Ditto. |
| * mcore/lseek.c: Ditto. |
| * mcore/open.c: Ditto. |
| * mcore/pe-cmb.ld: Ditto. |
| * mcore/pe-cmb.specs: Ditto. |
| * mcore/print.c: Ditto. |
| * mcore/putnum.c: Ditto. |
| * mcore/raise.c: Ditto. |
| * mcore/read.c: Ditto. |
| * mcore/sbrk.c: Ditto. |
| * mcore/stat.c: Ditto. |
| * mcore/unlink.c: Ditto. |
| * mcore/write.c: Ditto. |
| * mcore/c-syscalls.c: Removed. |
| |
| 1999-05-07 Nick Clifton <nickc@cygnus.com> |
| |
| * mcore/syscalls.S (_write): Use 0x50FF instead of trap 1. |
| Tidy up code layout. |
| |
| 1999-05-06 Nick Clifton <nickc@cygnus.com> |
| |
| * mcore/Makefile.in: Fix build rule. |
| * mcore/syscalls.s: Rename to syscalls.S |
| |
| 1999-05-04 Nick Clifton <nickc@cygnus.com> |
| |
| * mcore/configure.in: Depend upon crt0.S not crt0.s. |
| * mcore/configure: Regenerate. |
| |
| 1999-04-29 Nick Clifton <nickc@cygnus.com> |
| |
| * mcore/crt0.S: Renamed file from crt0.s. |
| Only invoke init() and fini() routines for ELF builds. |
| Use __bss_start__ and __bss_end__ to locate .bss section. |
| |
| 1999-04-26 Angela Marie Thomas <angela@cygnus.com> |
| |
| * mips/array.ld: Fix ELF ctor/dtor support. |
| * mips/ddb.ld: Likewise. |
| * mips/dve.ld: Likewise. |
| * mips/idt.ld: Likewise. |
| * mips/jmr3904app.ld: Likewise. |
| * mips/lsi.ld: Likewise. |
| * mips/nullmon.ld: Likewise. |
| * mips/pmon.ld: Likewise. |
| * mips/r5900.ld: Likewise. |
| * mips/sky.ld: Likewise. |
| * mips/vpu.ld: Likewise. |
| |
| 1999-04-22 Nick Clifton <nickc@cygnus.com> |
| |
| * mcore/crt0.s: Initialise data section, call _init and _fini. |
| |
| * mcore/syscalls.s (_exit): Renamed from __exit. |
| |
| * fr30/crt0.s (_start): Initialise arg[cv] after calling _init and |
| atexit. |
| |
| 1999-04-21 Nick Clifton <nickc@cygnus.com> |
| |
| * mcore/crt0.s (_start): Use .long directive, not .word. |
| |
| * mcore/syscalls.s (_sbrk): fix syntax. |
| |
| 1999-04-20 Jason Molenda (jsm@bugshack.cygnus.com) |
| |
| * sparc/sparc86.ld: Set alignment for the .data section. |
| |
| 1999-04-18 Nick Clifton <nickc@cygnus.com> |
| |
| * configure.in: Add support for mcore targets. |
| * configure: Regenerate. |
| * mcore: New directory. |
| * mcore/Makefile.in: New File: meta Makefile. |
| * mcore/configure.in: New File: meta configure file.. |
| * mcore/configure: New File: Generated. |
| * mcore/crt0.s: New File: mcore startup code. |
| * mcore/syscalls.s: New File: Assembler system call stubs. |
| * mcore/c-syscalls.c: New File: C system call stubs. |
| |
| Tue Apr 13 17:20:34 1999 Catherine Moore <clm@cygnus.com> |
| |
| * mips/array.ld: Support linkonce sections. |
| * mips/ddb.ld: Likewise. |
| * mips/dve.ld: Likewise. |
| * mips/idt.ld: Likewise. |
| * mips/jmr3904app.ld: Likewise. |
| * mips/jmr3904app-java.ld: Likewise. |
| * mips/jmr3904dram.ld: Likewise. |
| * mips/jmr3904dram-java.ld: Likewise. |
| * mips/lsi.ld: Likewise. |
| * mips/nullmon.ld: Likewise. |
| * mips/pmon.ld: Likewise. |
| * mips/r5900.ld: Likewise. |
| * mips/sky.ld: Likewise. |
| * mips/vpu.ld: Likewise. |
| |
| Mon Apr 12 21:01:46 1999 Catherine Moore <clm@cygnus.com> |
| |
| * mips/array.ld: Add ELF ctor/dtor support. |
| * mips/ddb.ld: Likewise. |
| * mips/dve.ld: Likewise. |
| * mips/idt.ld: Likewise. |
| * mips/jmr3904app.ld: Likewise. |
| * mips/lsi.ld: Likewise. |
| * mips/nullmon.ld: Likewise. |
| * mips/pmon.ld: Likewise. |
| * mips/r5900.ld: Likewise. |
| * mips/sky.ld: Likewise. |
| * mips/vpu.ld: Likewise. |
| |
| Sun Apr 11 00:43:34 1999 Jim Wilson <wilson@cygnus.com> |
| |
| * i960/crt0.c (_start): Increase stack size to 256K. |
| |
| Wed Mar 31 17:56:41 1999 Bob Manson <manson@charmed.cygnus.com> |
| |
| * i386/cygmon-salib.c: Add read and write syscall support. |
| * i386/cygmon-syscall.h: Ditto. |
| |
| * i386/cygmon-gmon.[ch]: Profile support. |
| |
| Sun Feb 28 23:39:32 1999 Geoffrey Noer <noer@cygnus.com> |
| |
| * libnosys/configure.in: Check cygwin*, not cygwin32. |
| * libnosys/configure: Regenerate. |
| |
| 1999-02-18 Tom Tromey <tromey@cygnus.com> |
| |
| * mips/configure: Rebuilt. |
| * mips/configure.in (script_list): Added jmr3904dram-java and |
| jmr3904app-java. |
| * mips/jmr3904dram-java.ld: New file. |
| * mips/jmr3904dram.ld: Don't mention -lqthreads. |
| * mips/jmr3904app-java.ld: New file. |
| * mips/jmr3904app.ld: Don't mention -lgcjcoop. |
| |
| Wed Feb 17 13:27:24 1999 Jim Wilson <wilson@cygnus.com> |
| |
| * m68k/crt0.S (start): Use jpbl not jmi in coldfire code. |
| |
| 1999-02-18 Tom Tromey <tromey@cygnus.com> |
| |
| * Merge from branch: |
| |
| Tue Feb 16 12:57:06 PST 1999 Angela Marie Thomas <angela@cygnus.com> |
| |
| * mips/jmr3904app.ld: Change -lqthreads to -lgcjcoop due to |
| library name change. |
| |
| Thu Feb 4 16:15:44 1999 Warren Levy <warrenl@cygnus.com> |
| |
| * mips/configure.in (script_list): Added jmr3904dram.ld. |
| * mips/configure: Rebuilt. |
| |
| Thu Jan 21 19:11:45 1999 Warren Levy <warrenl@cygnus.com> |
| |
| * mips/jmr3904dram.ld: Created. |
| |
| Wed Dec 30 11:15:46 1998 Anthony Green <green@cygnus.com> |
| |
| * mips/jmr3904app.ld: libgcc is dependent on libqthreads, so |
| it must be linked it. |
| |
| Wed Dec 30 11:04:54 1998 Anthony Green <green@cygnus.com> |
| |
| * mips/jmr3904app.ld: Make sure the stack owns all 8k plus |
| the padding allocated for alignment. |
| |
| 1998-11-23 Andrew Haley <aph@viagra.cygnus.co.uk> |
| |
| * mips/jmr3904-io.c: change get_mem_info() to use _mem_size |
| imported from the linker script. |
| * mips/jmr3904app.ld: Provide _mem_size. |
| |
| * mips/jmr3904app.ld: Allocate 8k bytes for stack. |
| |
| 1998-11-19 Andrew Haley <aph@viagra.cygnus.co.uk> |
| |
| * mips/crt0.S: set argc to 0 before calling main() |
| * get_mem_info() was incorrect; jmr3904 has 1M max of SRAM. |
| |
| Wed Nov 4 15:28:44 1998 Anthony Green <green@cygnus.com> |
| |
| * mips/jmr3904-io.c: Implement get_mem_info(). |
| |
| Wed Nov 4 15:22:41 1998 Anthony Green <green@cygnus.com> |
| |
| * mips/Makefile.in: Rename libtx39jmr.a to libjmr3904.a. |
| * mips/configure.in: Ditto. |
| * mips/configure: Regenerate. |
| |
| Tue Nov 3 15:39:14 1998 Angela Marie Thomas (angela@cygnus.com) |
| |
| * mips/configure.in: Add jmr3904app to script list for tx39. |
| * mips/configure: Regenerate. |
| |
| 1999-02-08 Nick Clifton <nickc@cygnus.com> |
| |
| * libnosys/configure.in: Add support for StrongARM target. |
| * libnosys/configure: Regenerate. |
| |
| Thu Feb 4 10:56:59 1999 Jeff Johnston <jjohnstn@cygnus.com> |
| |
| * d30v/syscalls.c (time): Added code to honor argument |
| passed to time which is either a pointer to a time_t |
| value to set or is the NULL pointer. |
| |
| 1999-02-03 Keith Seitz <keiths@cygnus.com> |
| |
| * m32r/m32r-lib.c (rx_char): Rename rx_uchar and return |
| only unsigned chars. |
| (getDebugChar2): Remove and integrate support into "M" |
| packet code. |
| |
| 1999-01-29 Doug Evans <devans@casey.cygnus.com> |
| |
| * sparc/erc32-crt0.S (_exit): Set magic number for simulator. |
| * sparc/traps.S (win_flush): Make sure %sp is valid before flushing |
| all windows. |
| |
| Tue Jan 19 06:19:51 1999 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300/crt0.S: Use ".stack" for the name of the stack section, |
| not "._stack". Remove mn10200 support. |
| * mn10300/trap.S: Remove mn10200 support. |
| * mn10300/sim.ld: Collect *(.stack) *(._stack) input sections into |
| the .stack output section to be safe. |
| * mn10300/eval.ld: Likewise. |
| |
| * mn10200/crt0.S: Use ".stack" for the name of the stack section, |
| not "._stack". |
| * mn10200/sim.ld: Collect *(.stack) *(._stack) input sections into |
| the .stack output section to be safe. |
| * mn10200/eval.ld: Likewise. |
| |
| 1999-01-14 Nick Clifton <nickc@cygnus.com> |
| |
| * fr30/Makefile.in: Set target of install to be SIM_INSTALL not |
| MON_INSTALL. |
| |
| * fr30/crt0.s (_start): Use atexit to call C++ global |
| destructors. Patch from Mark Salter <msalter@cygnus.com> |
| |
| 1999-01-12 Nick Clifton <nickc@cygnus.com> |
| |
| * fr30/crt0.s: Remove .stack section - it is no longer necessary. |
| |
| 1999-01-11 Nick Clifton <nickc@cygnus.com> |
| |
| * fr30/crt0.s (_start): Add calls to _init and _fini for C++ |
| global constructor/destructor support. |
| |
| 1999-01-07 Nick Clifton <nickc@cygnus.com> |
| |
| * fr30/crt0.s (_start): Apply patch from Mark Salter |
| <msalter@cygnus.com> to cope with initialising .bss areas that are |
| not word sized. |
| |
| 1998-12-23 Michael Meissner <meissner@cygnus.com> |
| |
| * m68k/idp.ld (.eh_frame): Add section to the .text segment. |
| (__{INIT,FINI}__SECTION__): Align to a 4 byte boundary. |
| (.gcc_except_table): Ditto. |
| |
| Mon Dec 21 22:45:05 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sh/sh1lcevb.ld: Add DWARF sections. |
| * sh/sh2lcevb.ld: Ditto. |
| * sh/sh3lcevb.ld: Ditto. |
| * sh/sh3bb.ld: Ditto. |
| |
| Fri Dec 18 22:07:21 1998 Bob Manson <manson@charmed.cygnus.com> |
| |
| * i386/cygmon.ld: Make sure -lcygmon appears both before |
| and after -lc, so we pick up functions from there in |
| preference to libc functions. |
| |
| * i386/cygmon-salib.c: Add syscalls for time and gettimeofday. |
| Don't add __do_global_ctors () and __do_global_dtors () if |
| we're on a coff target. |
| (open): Add dummy function so plumhall will compile. |
| (clock): Replacement for clock () syscall that uses |
| gettimeofday(). |
| |
| |
| 1998-12-18 Gavin Romig-Koch <gavin@cygnus.com> |
| |
| * mips/Makefile.in, mips/vr4300.S: Move the -mips3 into vr4300.S. |
| |
| 1998-12-17 Nick Clifton <nickc@cygnus.com> |
| |
| * fr30/syscalls.c: Include ../syscall.h not ../../sim/fr30/targ-vals.h |
| (_open): Return file descriptor allocated by simulator. |
| (isatty): Always false to avoid having to cope with reads from |
| stdin. For Now... |
| |
| 1998-12-16 Nick Clifton <nickc@cygnus.com> |
| |
| * fr30/Makefile.in: Add libraries to clean target. |
| |
| * fr30/syscalls.c (_write): Save length so that it can be returned |
| to caller. |
| |
| * fr30/crt0.s (_start): Initialise argc, argv and envp before |
| calling main(). |
| |
| 1998-12-15 Gavin Romig-Koch <gavin@cygnus.com> |
| |
| * mips/ddb.ld (OUTPUT_ARCH): Remove. |
| |
| 1998-12-12 Nick Clifton <nickc@cygnus.com> |
| |
| * fr30/syscalls.c: Remove stub for abort and add stubs for _kill |
| and _getpid. |
| |
| 1998-12-11 Nick Clifton <nickc@cygnus.com> |
| |
| * configure.in: Add support for fr30 target. |
| * configure: Regenerate. |
| * fr30: New directory. |
| * fr30/Makefile.am: New file - build crt0.o and libsim.a |
| * fr30/Makefile.in: New file - generate from Makefile.am. |
| * fr30/configure.in: New file - support fr30 target |
| * fr30/configure: New file - generate from configure.in. |
| * fr30/crt0.s: New file - Basic executable startup code. |
| * fr30/syscalls.c: New file - System call emulation library. |
| |
| 1998-12-11 Gavin Romig-Koch <gavin@cygnus.com> |
| |
| * mips/crt0.S (_start): Change initialization of FR. |
| |
| 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com> |
| |
| * i960/crt0.c (set_stack): Change return type to void. Init SP to |
| FP + 64 instead of FP. Simplify code to align ptr. |
| (_start): Call exit instead of _exit. Delete local variable stack. |
| Init stack to heap+4096. |
| * i960/mon960.c (abort): Ifdef out. |
| * i960/syscall.h: New file. |
| |
| 1998-12-04 Ken Raeburn <raeburn@cygnus.com> |
| |
| * mips/cma101.c (time): Add heuristic to handle Y2K overflow. |
| |
| Tue Dec 1 17:57:52 1998 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * config/ppc.mh (.s.o): Don't use CFLAGS_MRELOCATABLE when |
| assembling. |
| |
| Wed Nov 18 19:14:15 1998 Jim Wilson <wilson@cygnus.com> |
| |
| * mips/entry.S: Handle mips16 builds. |
| |
| 1998-10-30 Ian Molee <imolee@cygnus.com> |
| |
| * m32r/trapmon0.c: New file. Mon2000 trap handler. |
| * m32r/trapmon0.S: Removed. |
| * m32/Makefile.in: Changed to reflect above-changed files. |
| |
| Wed Oct 28 07:55:55 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/crt0.S: Move entry point to start of text section. |
| Put the address of the data section at the start of the section, |
| so the GDB sparclite loader can find it for a.out loads. |
| |
| Mon Oct 26 13:11:41 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * d30v/syscalls.c (time): Returns a time_t and accepts a pointer to |
| a time_t as its argument. |
| |
| * i386/cygmon-syscall.h: Fix bogus asm constraints. You must not |
| clobber a register that overlaps with an input or output. |
| |
| Fri Oct 23 11:06:16 1998 John Metzler <jmetzler@cygnus.com> |
| |
| * mips/jmr3904-io.c (hardware_init_hook): Add file to support |
| serial input and out put as required by libgloss read and write |
| functions. |
| |
| * mips/jmr3904app.ld : LInker script for tx39jmr3904 board. Uses |
| addresses per eCos conventions, not original ROM monitor. |
| |
| * configure.in: Add libtx39jmr.c to build target |
| |
| * Makefile.in: rules for libtx39jmr.a and jmr3904-io.o |
| |
| 1998-10-15 Ian Molee <imolee@cygnus.com> |
| |
| * m32r/mon.specs: New file |
| * m32r/trapmon0.S: New file |
| * m32r/Makefile.in: Modified to add support for mon2000 trap0. |
| |
| Tue Oct 13 11:52:03 1998 Jeff Johnston <jjohnstn@cygnus.com> |
| |
| * libnosys/warning.h: New file. |
| |
| 1998-10-06 Ken Raeburn <raeburn@cygnus.com> |
| |
| * mips/configure.in: Build nullmon stuff in default case. Don't |
| treat vr4100 specially. |
| |
| Tue Oct 6 15:17:42 1998 Jeff Johnston <jjohnstn@cygnus.com> |
| |
| * libnosys/sbrk.c (_sbrk): Added reference to config.h. |
| * libnosys/close.c (_close): Added stub warning outside of |
| function body and added reference to config.h. |
| * libnosys/execve.c (_execve): Ditto. |
| * libnosys/fork.c (_fork): Ditto. |
| * libnosys/fstat.c (_fstat): Ditto. |
| * libnosys/getpid.c (_getpid): Ditto. |
| * libnosys/gettod.c (_gettimeofday): Ditto. |
| * libnosys/isatty.c (_isatty): Ditto. |
| * libnosys/kill.c (_kill): Ditto. |
| * libnosys/link.c (_link): Ditto. |
| * libnosys/lseek.c (_lseek): Ditto. |
| * libnosys/open.c (_open): Ditto. |
| * libnosys/read.c (_read): Ditto. |
| * libnosys/stat.c (_stat): Ditto. |
| * libnosys/times.c (_times): Ditto. |
| * libnosys/unlink.c (_unlink): Ditto. |
| * libnosys/wait.c (_wait): Ditto. |
| * libnosys/write.c (_write): Ditto. |
| * libnosys/acconfig.h: New file. |
| * libnosys/config.h.in: New file. |
| * libnosys/exit.c: Removed as _exit cannot be stubbed. |
| * libnosys/Makefile.in: Regenerated. |
| * libnosys/configure.in: Configure header file specified. |
| * libnosys/configure: Regenerated. |
| |
| Wed Sep 30 12:45:43 1998 Bob Manson <manson@charmed.cygnus.com> |
| |
| * i386/cygmon.ld: Increase memory limits; put the initial |
| executable above 1MB. |
| |
| Fri Sep 25 13:49:22 1998 Bob Manson <manson@charmed.cygnus.com> |
| |
| * i386/configure.in: Changed crt0.c to cygmon-salib.c. |
| |
| Wed Sep 23 19:25:46 1998 Bob Manson <manson@charmed.cygnus.com> |
| |
| * configure.in: Add i386-*-elf* triplet. |
| * i386/*: Support for i386 targets. |
| |
| Wed Sep 16 19:43:52 1998 Doug Evans <devans@canuck.cygnus.com> |
| |
| * m32r/m32r-lib.c: Rename -DMSA2000 to -DREVC and reverse test. |
| (exceptionHandler,getExceptionHandler): Add cast to avoid warning. |
| |
| Wed Sep 9 19:22:03 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/Makefile.in: Remove cache86x.o, not needed any more. |
| * sparc/sparclite.h: (read_asr, write_asr): Define. |
| * sparc/cache.c (is_danlite): New function. |
| (cache_off, cache_on, flush_i_cache): Test for DANlite. |
| * sparc/salib.c (update_leds): Allow user to disable LED flashing. |
| * sparc/sparc86x.ld: Prevent section overlap. |
| |
| 1998-09-04 Keith Seitz <keiths@cygnus.com> |
| |
| * m32r/m32r-lib.c (rx_rdy): Add support for MSA2000G01 board. |
| (rx_char): Ditto. |
| (getDebugChar2): New function to support binary downloads (gdb |
| remote protocol "X" command). |
| (exceptionHandler): Add support for MSA2000G01 board. |
| (getExceptionHandler): Ditto. |
| |
| 1998-08-20 Michael Meissner <meissner@cygnus.com> |
| |
| * libnosys/gettod.c: Include sys/time.h so that struct timezone is |
| declared. |
| |
| Sun Aug 16 10:46:43 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/Makefile.in: Add new BSP for sparc86x (DANlite). |
| * sparc/salib.c (outbyte): Add hook for GDB stub. |
| (cache_off, cache_on, flush_i_cache): Move to cache.c. |
| * sparc/cache.c: New file for sparclite-specific cache code. |
| * sparc/cache-86x.c: New file for sparc86x-specific cache code. |
| * sparc/sparc86x.ld: New linker script for sparc86x. |
| * sparc/crt0.S: Disable broken data relocation code. |
| * sparc/sparcl-stub.c (outbyte_stub): New function for redirecting |
| standard output to GDB. |
| (handle_exception): Initialize outbyte hook. |
| |
| Tue Aug 11 13:27:31 1998 Jim Wilson <wilson@cygnus.com> |
| |
| * m68k/idp.ld (__INIT_SECTION__): Align to 2 byte boundary. |
| * m68k/bcc.ld, m68k/mvme135.ld, m68k/mvme162.ld: Likewise. |
| * m68k/sbc5204.ld, m68k/sbc5206.ld: Likewise. |
| |
| 1998-08-11 Jason Merrill <jason@yorick.cygnus.com> |
| |
| * mn10300/{sim.ld,eval.ld}: Add init_priority support. |
| |
| Tue Aug 11 10:04:05 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10200/sim.ld: Rework code to insert pad before the start of the |
| data segment. |
| * mn10200/eval.ld: Likewise. |
| * mn10300/sim.ld: Likewise. |
| * mn10300/eval.ld: Likewise. |
| |
| Sat Aug 8 09:46:37 1998 Jim Wilson <wilson@cygnus.com> |
| |
| * mips/cma101.c (__sizemem): New local variable extra. Align base |
| to int boundary. |
| |
| Tue Jul 28 10:57:12 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/Makefile.in (ERC32_OBJS): Add fixctors. |
| * sparc/erc32-crt0.S: Call __fix_ctors just before calling main. |
| * sparc/fixctors.c: New file. |
| |
| Sat Jul 18 07:15:33 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/crt0.S (win_ovf_trap, win_unf_trap): Use correct names for |
| extern functions win_ovf and win_unf; fixes unresolved symbols |
| in COFF. |
| |
| Mon Jul 13 17:50:41 1998 Jeff Johnston <jjohnstn@cygnus.com> |
| |
| * configure.in: Added libnosys as subdir. |
| * configure: Rebuilt configure based on configure.in. |
| * libnosys/close.c (_close): Part of new libnosys stub library |
| to use for situations with no operating system support. |
| * libnosys/environ.c (environ): ditto. |
| * libnosys/execve.c (_execve): ditto. |
| * libnosys/exit.c (_exit): ditto. |
| * libnosys/fork.c (_fork): ditto. |
| * libnosys/fstat.c (_fstat): ditto. |
| * libnosys/getpid.c (_getpid): ditto. |
| * libnosys/gettod.c (_gettimeofday): ditto. |
| * libnosys/isatty.c (_isatty): ditto. |
| * libnosys/kill.c (_kill): ditto. |
| * libnosys/link.c (_link): ditto. |
| * libnosys/lseek.c (_lseek): ditto. |
| * libnosys/open.c (_open): ditto. |
| * libnosys/read.c (_read): ditto. |
| * libnosys/sbrk.c (_sbrk): ditto. |
| * libnosys/stat.c (_stat): ditto. |
| * libnosys/times.c (_times): ditto. |
| * libnosys/unlink.c (_unlink): ditto. |
| * libnosys/wait.c (_wait): ditto. |
| * libnosys/write.c (_write): ditto. |
| * libnosys/Makefile.in : Makefile.in for creating libnosys Makefile. |
| * libnosys/configure.in: configure.in to create libnosys configure. |
| * libnosys/configure: Configure for libnosys library. |
| |
| Mon Jul 13 14:13:07 EDT 1998 Jim Lemke <jlemke@cygnus.com> |
| |
| * sim/mips.ld: Clarify a comment. |
| |
| Tue Jul 7 21:12:41 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/elfsim.ld: Make it work on both a.out and ELF. |
| * sparc/traps.S: Rename trap_table label to work on both a.out |
| and ELF. Put the address of the data section at the start |
| of the section, so the simulator loader can find it for a.out loads. |
| |
| Thu Jun 25 09:24:53 1998 Mark Alexander <marka@cygnus.com> |
| |
| * config/mn10200.mt: New file. |
| |
| Tue Jun 23 22:45:49 1998 Mark Alexander <marka@cygnus.com> |
| |
| * mn10200/crt0.S: Don't waste top four bytes of stack. |
| * mn10200/eval.ld: Fix stack top address. |
| |
| Mon Jun 22 09:30:22 1998 Drew Moseley <dmoseley@cygnus.com> |
| |
| * mips/dvemon.c: Remove the close function and get it from the generic |
| close.o |
| * mips/Makefile.in (DVEOBJS): Add generic open.o and close.o to the DVEOBJS |
| list to ensure that the proper API's are included. |
| |
| Wed Jun 17 12:33:05 1998 Mark Alexander <marka@cygnus.com> |
| |
| * configure.in: Add mn10200 support. |
| * configure: Regenerate. |
| * mn10200/Makefile.in: New file. |
| * mn10200/_exit.c: New file. |
| * mn10200/access.c: New file. |
| * mn10200/chmod.c: New file. |
| * mn10200/chown.c: New file. |
| * mn10200/close.c: New file. |
| * mn10200/configure: New file. |
| * mn10200/configure.in: New file. |
| * mn10200/creat.c: New file. |
| * mn10200/crt0.S: New file. |
| * mn10200/crt1.c: New file. |
| * mn10200/eval.ld: New file. |
| * mn10200/execv.c: New file. |
| * mn10200/execve.c: New file. |
| * mn10200/fork.c: New file. |
| * mn10200/fstat.c: New file. |
| * mn10200/getpid.c: New file. |
| * mn10200/gettime.c: New file. |
| * mn10200/isatty.c: New file. |
| * mn10200/kill.c: New file. |
| * mn10200/lseek.c: New file. |
| * mn10200/open.c: New file. |
| * mn10200/pipe.c: New file. |
| * mn10200/read.c: New file. |
| * mn10200/sbrk.c: New file. |
| * mn10200/sim.ld: New file. |
| * mn10200/stat.c: New file. |
| * mn10200/test.c: New file. |
| * mn10200/time.c: New file. |
| * mn10200/times.c: New file. |
| * mn10200/trap.S: New file. |
| * mn10200/trap.h: New file. |
| * mn10200/unlink.c: New file. |
| * mn10200/utime.c: New file. |
| * mn10200/wait.c: New file. |
| * mn10200/write.c: New file. |
| |
| Fri Jun 12 17:26:56 1998 Doug Evans <devans@seba.cygnus.com> |
| |
| * m32r/sys/syscall.h: Delete. Use ./syscall.h now. |
| * m32r/trap0.S: Renamed from trap.S. |
| * m32r/eit.h: New file. |
| * m32r/crtsysc.c: Delete, split up into several files. |
| * m32r/chmod.c: New file. |
| * m32r/close.c: New file. |
| * m32r/exit.c: New file. |
| * m32r/fstat.c: New file. |
| * m32r/getpid.c: New file. |
| * m32r/isatty.c: New file. |
| * m32r/kill.c: New file. |
| * m32r/lseek.c: New file. |
| * m32r/open.c: New file. |
| * m32r/raise.c: New file. |
| * m32r/read.c: New file. |
| * m32r/sbrk.c: New file. |
| * m32r/stat.c: New file. |
| * m32r/unlink.c: New file. |
| * m32r/utime.c: New file. |
| * m32r/write.c: New file. |
| * m32r/Makefile.in (SYSCALLS): Delete. |
| (LIBOBJS,LIBGLOSS): New variables. |
| (all,install): Update. |
| (libgloss.a): New rule. |
| |
| Thu Jun 11 08:38:42 1998 Doug Evans <devans@seba.cygnus.com> |
| |
| * sparc/cygmon-salib.c (setitimer): Add `const' to second arg. |
| (gettimeofday): Change type of 2nd arg to struct timezone *. |
| |
| Tue Jun 9 12:02:21 1998 Ian Carmichael <iancarm@cygnus.com> |
| |
| * mips/syscalls.c (sbrk): Allow memory allocation to work |
| for configurations which don't have memory at K1BASE. |
| * mips/cma101.c (__sizemem): Ditto. |
| |
| Tue Jun 9 13:17:28 1998 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * m68k/emc-stub.c: New file, stub for the EMC Symmetrix target. |
| * m68k/gdbinit.emc: New file, user support for special features |
| supported only on the EMC Symmetrix target. |
| |
| Fri Jun 5 16:40:20 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/elfsim.ld: Fix ctor and dtor tables to work in both |
| little- and big-endian executables. |
| |
| Wed Jun 3 23:09:38 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/sparcl-stub.c: Include asm.h. Use STRINGSYM macro to generate |
| proper prefix for public assembly language labels. |
| * sparc/ex930.ld: Add DWARF sections. |
| * sparc/ex931.ld: Ditto. |
| * sparc/ex934.ld: Ditto. |
| * sparc/elfsim.ld: Simplify and clean up. |
| * sparc/Makefile.in: Build ex934 BSP. Allow little-endian builds. |
| * sparc/traps.S (win_flush): Rewrite using code from Cygmon |
| to eliminate register corruption. |
| |
| Mon Jun 1 15:21:05 1998 Geoffrey Noer <noer@cygnus.com> |
| |
| * sparc/cygmon-salib.c: Stop including sys/itimer.h |
| |
| Sun May 31 10:46:37 1998 Michael Meissner <meissner@cygnus.com> |
| |
| * rs6000/Makefile.in (SOLARIS_*): Don't build solaris bsp's any |
| more. |
| |
| Fri May 22 13:50:55 1998 Angela Marie Thomas (angela@cygnus.com) |
| |
| * mn10300/Makefile.in: Install sim.ld. |
| |
| Wed May 20 22:45:11 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/elfsim.ld: Add constructor and destructor tables. |
| |
| Sat May 16 17:08:17 1998 Bob Manson <manson@charmed.cygnus.com> |
| |
| * sparc/cygmon-salib.c (__getProgramArgs): Use asm constraints. |
| |
| Fri May 15 16:50:36 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/traps.S (win_flush): Don't destroy %g1 and %g2. |
| |
| Fri May 15 15:59:30 1998 Gavin Koch <gavin@cygnus.com> |
| |
| * mips/configure.in: Add idt to tx39 chain. |
| * mips/configure: Rebuild. |
| |
| Fri May 15 15:48:28 1998 Gavin Koch <gavin@cygnus.com> |
| |
| * mips/crt0.S (__stackbase): Added. |
| (zerobss): Initialize __stackbase. |
| |
| 1998-05-13 Brendan Kehoe <brendan@cygnus.com> |
| |
| * mips/configure.in: Also grok `mipstx39*-*-*'. |
| * mips/configure: Regenerated. |
| |
| Mon May 11 15:07:12 1998 Bob Manson <manson@charmed.cygnus.com> |
| |
| * configure.in: Added powerpcle target. |
| * configure: Regenerated. |
| |
| Thu May 7 16:43:37 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/elfsim.ld (OUTPUT_FORMAT): Add little-endian support. |
| |
| * sparc/crt0.S (_start): Define label for ELF targets. |
| * sparc/salib.c: Include asm.h. Use STRINGSYM macro to generate |
| proper prefix for public assembly language labels. |
| (write, read): Disable to avoid conflict with generic versions |
| of these functions. |
| * sparc/erc32-stub.c: Move STRINGSYM macro to sparc/asm.h. |
| * sparc/asm.h: Move STRINGSYM macro here from sparc/erc32-stub.c |
| |
| Mon May 4 08:30:58 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/configure.in: Treat sparc86x as a sparclite. |
| * sparc/configure.in: Ditto. |
| * sparc/Makefile.in (slite-install): Install missing files |
| for simulator. |
| |
| Thu Apr 30 16:41:15 1998 John Metzler <jmetzler@cygnus.com> |
| |
| * mips/configure.in: adjust target type pattern to export nullmon.ld |
| * mips/configure: regenerated |
| |
| Mon Apr 27 21:38:18 1998 Mark Alexander <marka@cygnus.com> |
| |
| * configure.in: Added sparc86x configuration. |
| * configure: Ditto. |
| |
| Wed Apr 22 21:45:13 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * mips/crt0.S: Increase stack alignment. |
| |
| Fri Apr 10 21:17:48 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/traps.S (win_flush): Prevent immediate window underflow |
| trap on return. Miscellaneous comment formatting cleanup. |
| |
| Tue Apr 7 18:34:51 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/elfsim.ld: Align BSS at 8-byte boundary. |
| |
| Mon Apr 6 13:12:32 1998 Mark Salter <msalter@chef.cygnus.com> |
| |
| * rs6000/ads-io.c (write): Added write(). |
| |
| * rs6000/Makefile.in: Changed objects used for libads to be |
| new ads specific object files instead of some mvme objects. |
| |
| * Added ads-io.c and ads-exit.c to provide function stubs which |
| are safe on ads board (SDS monitor). |
| |
| * rs6000/mbx-outbyte.c (outbyte): Foundry console output |
| is fixed, so re-enable output char quoting for mbx. |
| |
| * rs6000/mbx.specs: Added blank line to end of file. There |
| were link errors without it? |
| |
| * rs6000/mbx.specs: Use mbx.ld script for linking. |
| |
| * rs6000/mbx-outbyte.c: Don't quote characters. We don't want |
| gdb to display program output, yet. |
| |
| * rs6000/Makefile.in (install-mbx): Fixed install of mbx.specs |
| file. |
| |
| * rs6000/Makefile.in: Support for MBX EPPCBug monitor. |
| * rs6000/mbx-{exit,inbyte,outbyte,print}.c: New files for MBX. |
| * rs6000/mbx.ld,mbx.specs: New files for MBX. |
| |
| Wed Apr 1 21:42:40 1998 Mark Alexander <marka@cygnus.com> |
| |
| * sparc/elfsim.ld: New linker script for running ELF programs |
| in erc32 simulator. |
| * sparc/erc32-crt0.S: Disable copying of data segment. |
| * sparc/erc32-stub.c: Generate correct public name for breakinst. |
| * sparc/Makefile.in: Build erc32 library always. |
| |
| Thu Apr 2 11:24:32 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mips/syscalls.c (sbrk): Check word size correct for |
| get_mem_info. |
| |
| Fri Mar 27 08:55:52 1998 Mark Alexander <marka@cygnus.com> |
| |
| * mips/crt0.S: Insert NOP before _start to keep GDB happy. |
| * mips/dve.ld: Eliminate references to VR4300. |
| |
| Thu Mar 26 19:47:36 1998 Mark Alexander <marka@cygnus.com> |
| |
| * mn10300/eval.ld: Don't use absolute path in SEARCH_DIR. |
| * mn10300/sim.ld: Ditto. |
| |
| Wed Mar 25 10:49:49 1998 Bob Manson <manson@charmed.cygnus.com> |
| |
| * sparc/cygmon-salib.c (__getProgramArgs): New function. |
| |
| * sparc/cygmon-crt0.S (init): Call __getProgramArgs. |
| |
| * configure.in: Added sparc64 configuration. |
| |
| * configure: Regenerated. |
| |
| Tue Mar 24 10:44:41 1998 Mark Alexander <marka@cygnus.com> |
| |
| * mn10300/Makefile.in: Install libraries, not just linker scripts. |
| |
| Tue Mar 24 09:52:28 1998 Mark Alexander <marka@cygnus.com> |
| |
| * config/mn10300.mt: New file |
| * mn10300/configure.in: Use mn10300.mt as target makefile fragment |
| instead of nothing at all. |
| * mn10300/configure: Ditto. |
| |
| Tue Mar 24 16:59:06 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk> |
| |
| * doc/configure: Regenerate with autoconf 2.12.1 to fix shell |
| issues for NT native builds. |
| |
| Mon Mar 16 18:51:11 1998 Bob Manson <manson@charmed.cygnus.com> |
| |
| * sparc/cygmon-crt0.S: Make start a global symbol (for the linker |
| script; we also need to make SYM(start) global). |
| |
| Wed Mar 11 10:24:39 1998 Stan Cox <scox@rtl.cygnus.com> |
| |
| * sparc/cygmon.ld.src (.debug*): Added dwarf sections. |
| |
| Fri Mar 6 23:41:54 1998 Bob Manson <manson@charmed.cygnus.com> |
| |
| * sparc/cygmon.ld.src: Use TARGET_RAM_START. |
| |
| * sparc/Makefile.in (SLITE_RAM_START): Add. |
| (SPARC_RAM_START): Add. |
| (SPARC64_RAM_START): Add. |
| (SLITE_ALL): Add cygmon object files and linker script. |
| slite-install: Install CygMon libraries and linker script. |
| |
| Mon Mar 2 19:36:12 1998 Michael Meissner <meissner@cygnus.com> |
| |
| * rs6000/ads.ld: Add default attributes to memory region. |
| * a29k/{p3dgps,sa29200{,b}}.ld: Ditto. |
| * hp74x/hppa.ld: Ditto. |
| * m68k/{bcc,idp,mvme{135,162},sbc520{4,6}}.ld: Ditto. |
| * pa/{op50n,w89k}.ld: Ditto. |
| * sh/{sh1{l,2,3}cevb,sh3bb}.ld: Ditto. |
| * sparc/{erc32,ex93{0,1,4}}.ld: Ditto. |
| |
| Fri Feb 27 17:15:35 1998 Mark Alexander <marka@cygnus.com> |
| |
| * mn10300/configure.in (AC_INIT): Use crt0.S instead of crt0-eval.S. |
| |
| Fri Feb 27 17:39:23 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * configure.in: Use "mn10300" subdir for "mn10300-*-*". |
| |
| Mon Feb 23 20:29:42 1998 Mark Alexander <marka@cygnus.com> |
| |
| * mn10300/Makefile.in (GENOBJS): Remove system calls no longer |
| supported. |
| * mn10300/trap.h: Use generic syscall.h. |
| * mn10300/sys/syscall.h: Removed in favor of generic syscall.h. |
| |
| Mon Feb 23 16:19:17 1998 Gavin Koch <gavin@cygnus.com> |
| |
| * mips/Makefile.in (cma101.o): Add rule to explicitly use -mno-mips16. |
| * mips/cma101.c: Reverse my previous change. |
| Add #ifdef __mips16 then #error. |
| |
| Mon Feb 23 11:29:33 1998 Mark Alexander <marka@cygnus.com> |
| |
| * mn10300/Makefile.in: Add rules for building libeval.a. |
| * mn10300/configure: Don't use default.mt. |
| * mn10300/configure.in: Ditto. |
| * mn10300/eval.ld: Replace with modified version of default script. |
| |
| * mn10300/_exit.c: New file for libeval.a. |
| * mn10300/access.c: Ditto. |
| * mn10300/chmod.c: Ditto. |
| * mn10300/chown.c: Ditto. |
| * mn10300/close.c: Ditto. |
| * mn10300/creat.c: Ditto. |
| * mn10300/crt0.S: Ditto. |
| * mn10300/crt1.c: Ditto. |
| * mn10300/execv.c: Ditto. |
| * mn10300/execve.c: Ditto. |
| * mn10300/fork.c: Ditto. |
| * mn10300/fstat.c: Ditto. |
| * mn10300/getpid.c: Ditto. |
| * mn10300/gettime.c: Ditto. |
| * mn10300/isatty.c: Ditto. |
| * mn10300/kill.c: Ditto. |
| * mn10300/lseek.c: Ditto. |
| * mn10300/open.c: Ditto. |
| * mn10300/pipe.c: Ditto. |
| * mn10300/read.c: Ditto. |
| * mn10300/sbrk.c: Ditto. |
| * mn10300/sim.ld: Ditto. |
| * mn10300/stat.c: Ditto. |
| * mn10300/time.c: Ditto. |
| * mn10300/times.c: Ditto. |
| * mn10300/trap.S: Ditto. |
| * mn10300/trap.h: Ditto. |
| * mn10300/unlink.c: Ditto. |
| * mn10300/utime.c: Ditto. |
| * mn10300/wait.c: Ditto. |
| * mn10300/write.c: Ditto. |
| * mn10300/sys/syscall.h: Ditto. |
| |
| Fri Feb 20 17:19:22 1998 Gavin Koch <gavin@cygnus.com> |
| |
| * mips/cma101.c: #ifdef out whole file if mips16. |
| |
| Thu Feb 19 13:05:58 1998 Bob Manson <manson@charmed.cygnus.com> |
| |
| * i960/*: Revised. |
| |
| Wed Feb 18 12:00:20 1998 Jeff Johnston <jjohnstn@cygnus.com> |
| |
| * m68k/crt0.S (start): Fixed code that clears .bss. Code |
| was using dbra instruction and did not account for the fact |
| that the instruction branches until counter is -1, not 0. |
| |
| Tue Feb 17 18:21:52 1998 Mark Alexander <marka@cygnus.com> |
| |
| * mn10300/Makefile.in: New file for MN10300 eval board support. |
| * mn10300/configure: Ditto. |
| * mn10300/configure.in: Ditto. |
| * mn10300/crt0-eval.S: Ditto. |
| * mn10300/eval.ld: Ditto. |
| * mn10300/test.c: Ditto. |
| |
| Tue Feb 17 19:55:47 1998 Gavin Koch <gavin@cygnus.com> |
| |
| * mips/vr4300.S (__previous): Fix comment type-o in |
| previous change. |
| |
| Tue Feb 17 10:47:45 1998 Gavin Koch <gavin@cygnus.com> |
| |
| * mips/vr4300.S (__previous,baseaddr,res_baseaddr): |
| Figure the length of the exception handler at runtime |
| rather than compile time. |
| |
| Tue Feb 3 14:07:51 1998 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: When running config-ml.in, put --enable-multilib |
| before ac_configure_args, so that --disable-multilib can override |
| it. |
| * configure: Rebuild. |
| |
| Fri Jan 9 17:10:59 1998 Mark Alexander <marka@cygnus.com> |
| |
| * mips/Makefile.in (LSIOBJS, DVEOBJS): Add part-specific objects. |
| |
| Mon Jan 5 17:01:45 1998 Mark Alexander <marka@cygnus.com> |
| |
| * config/mips.mt: Add rules for read.o and write.o. |
| * mips/dvemon.c: New file to support Densan DVE-R3900 board. |
| * mips/dve.ld: New file to support Densan DVE-R3900 board. |
| * mips/Makefile.in: Add rules for Densan support library libdve.a. |
| * mips/configure.in: Build libdve.a for tx39 targets. |
| * mips/configure: Ditto. |
| |
| Tue Dec 30 15:34:17 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * sparc/Makefile.in: Add define for TARGET_CPU_$(CPU). |
| |
| * sparc/cygmon-salib.c: If TARGET_CPU_SPARC64, include |
| sys/types.h, and define _open_r, _close_r, etc. |
| |
| Sun Dec 28 17:15:50 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * sparc/cygmon-salib.c (_open_r, _close_r): New functions. |
| (read, write): If the fd isn't 0, 1, or 2, return an error. |
| |
| Fri Dec 26 18:45:28 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * sparc/cygmon-salib.c (_sbrk_r, _fstat_r,_brk_r): Define. |
| |
| * sparc/cygmon-crt0.S: Zero out %fp so backtraces from gdb work |
| properly. |
| |
| * sparc/configure.in: Set CYGMONLDSCRIPTTEMPL appropriately. |
| |
| * sparc/Makefile.in ($(objdir)/cygmon.ld): Use CYGMONLDSCRIPTTEMPL |
| to determine what template file we use. |
| |
| 1997-12-22 Felix Lee <flee@cygnus.com> |
| |
| * rs6000/sim-errno.c (_cerror): need to return -1. |
| * rs6000/sol-cfuncs.c (_cerror): likewise. |
| |
| Mon Dec 22 16:54:31 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * sparc/cygmon-crt0.S: Add stack bias code if TARGET_CPU_SPARC64 is |
| defined. Allocate 128 bytes for a frame if sparc64. |
| |
| * sparc/cygmon.ld.src: New file, replaced cygmon.ld. |
| |
| * sparc/Makefile.in (SPARC_OBJ_FORMAT): Added. |
| (SPARC64_ALL,SPARC64_INSTALL,SPARC64_OBJ_FORMAT): Added. |
| ($(objdir)/cygmon.ld): Create from $(objdir)/cygmon.ld.src. |
| |
| * sparc/configure.in: Add sparc64 to CPU list. |
| * sparc/configure: Regenerated. |
| * configure: Regenerated. |
| |
| Sun Dec 21 18:19:27 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * configure.in: Added sparc64-elf configuration. |
| |
| Wed Dec 10 19:15:26 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mips/pmon.ld, mips/ddb.ld: Add handling of DWARF |
| sections. Copied from mips/idt.ld. |
| |
| Wed Dec 10 12:31:04 1997 Mark Alexander <marka@cygnus.com> |
| |
| * mips/configure: Add entry.o to LSI library. |
| * mips/configure.in: Ditto. |
| * mips/crt0.S: Declare init hooks as .text to avoid linker errors. |
| * mips/pmon.S: Don't use 64-bit instructions on 32-bit EABI machines. |
| * mips/entry.S: New file (MIPS16 entry/exit exception handler). |
| |
| Tue Dec 9 18:51:45 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v/crt0.S (_start): Don't load r1 with 32 anymore. Zero out |
| the 3 bss areas. |
| |
| Fri Nov 28 22:34:14 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * sparc/cygmon-salib.c (open): New syscall. |
| |
| * sparc/cygmon.ld: Add gcc_except_table section. |
| |
| * sparc/cygmon-crt0.S: Call __install_signal_handler. |
| Run ctors/dtors as appropriate. |
| |
| * sparc/cygmon-salib.c (gettimeofday): New syscall. |
| (stime): Ditto. |
| (add_mapping): Ditto. |
| (remove_mapping): Ditto. |
| (__install_signal_handler): Ditto. |
| |
| Wed Nov 26 15:25:11 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * rs6000/mcount.S: New file to in case no profiling module was |
| defined. |
| |
| * rs6000/Makefile.in (OBJS): Add mcount.o |
| (mcount.o): Depend on mcount.S. |
| |
| Mon Nov 24 23:25:07 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * sparc/cygmon.ld: Add linkonce sections. |
| |
| Mon Nov 24 18:42:55 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v/syscalls.c (__syscall): Correct setting errno. |
| |
| Sun Nov 23 17:49:45 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * sparc/Makefile.in: Removed TARGET_CFLAGS. |
| * sparc/configure.in: Ditto. |
| * sparc/configure: Regenerated. |
| |
| Fri Nov 21 21:21:23 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * syscall.h: Remove d30v from comments. |
| |
| * d30v/syscalls.c: Use common syscall.h file, move setting errno |
| into common function, rather than have each stub do it. |
| |
| * d30v/Makefile.in (syscalls.c): Use common syscall.h, not the old |
| d30v specific version. |
| (clean): Properly remove libraries. |
| |
| * d30v/sys/syscall.h: Delete. |
| |
| Wed Nov 19 16:13:00 1997 Doug Evans <devans@seba.cygnus.com> |
| |
| * rs6000/Makefile.in (unlink.o): Add rule for. |
| |
| * syscall.h: New file. |
| |
| Tue Nov 18 17:22:18 1997 Doug Evans <devans@seba.cygnus.com> |
| |
| * sparc/asm.h (CONCAT1): Use __USER_LABEL_PREFIX__. |
| |
| * sparc/Makefile.in: Reorganize file. |
| |
| * sparc/Makefile.in: Rename all occurences of SIM to ERC32. |
| (all): Don't build erc32 support any more (never installed anyway). |
| * sparc/erc32-io.c: Renamed from sim-io.c. |
| * sparc/erc32-stub.c: Renamed from sim-stub.c. |
| * sparc/erc32-crt0.S: Renamed from sim-crt0.S. |
| * sparc/erc32.ld: Renamed from sim.ld. |
| * sparc/configure.in (AC_INIT): Update. |
| * sparc/configure: Regenerate. |
| |
| Tue Nov 18 13:54:46 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v/syscalls.c: New file to provide system call stubs. |
| * d30v/sys/syscall.h: New file to provide system call numbers. |
| * d30v/sim-{exit,read,write}.S: Delete, no longer used. |
| * d30v/Makefile.in: Remove old system stubs, and use the new ones |
| in syscalls.c. |
| |
| Tue Nov 18 12:38:37 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v/sys/syscall.h: Define for d30v system calls. |
| |
| Mon Nov 17 22:04:04 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * configure.in: Configure the sparc directory for the sparc-elf |
| toolchain. |
| * configure: Regenerated. |
| |
| * sparc/Makefile.in: For a generic sparc toolchain, build the cygmon |
| crt0 and install the cygmon linker script. |
| |
| * sparc/asm.h (USER_LABEL_PREFIX): If it's already defined, don't |
| redefine it. |
| |
| * sparc/configure.in: Add LIB_AC_PROG_CC. Add TARGET_CFLAGS |
| subst variable. |
| * sparc/configure: Regenerated. |
| |
| * sparc/cygmon.ld: New file. |
| * sparc/cygmon-crt0.S: New file. |
| * sparc/cygmon-salib.c: New file. |
| |
| Sun Nov 16 20:22:22 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v/crt0.S (_start): Set up stack pointer to end of internal |
| memory by default. |
| |
| Tue Nov 11 17:43:06 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v/Makefile.in (OBJS): Use print.o, not print.c. Add sbrk.o. |
| |
| Mon Nov 10 13:57:40 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * configure.in (d30v-*-*): Add configuration. |
| * configure: Regenerate. |
| |
| * d30v/{crt0,sim-{read,write,exit}}.S: Correct typos. |
| * d30v/Makefile.in: Ditto. |
| |
| Sat Nov 8 14:38:57 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v/crt0.S: New file for d30v port. |
| * d30v/configure{,.in}: Ditto. |
| * d30v/Makefile.in: Ditto. |
| * d30v/{in,out}byte.c: Ditto. |
| * d30v/sim-{read,write,exit}.c: Ditto. |
| |
| Tue Sep 16 15:21:08 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips/Makefile.in (vr4300.o): Reinstate command, it's will |
| be necessary until all hosts properly set BSP in configure.in. |
| |
| Mon Sep 15 16:20:29 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * m68k/*.ld: Add underscore versions of __CTOR_LIST__ and |
| __DTOR_LIST__. |
| |
| Mon Sep 15 12:13:34 1997 Mark Alexander <marka@cygnus.com> |
| |
| * mips/crt0.S: Declare external functions as .text to |
| eliminate linker warnings. |
| |
| Tue Sep 9 23:35:04 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips/Makefile.in (SCRIPTS): Now is configurable. |
| (BSP): Now is configurable. |
| (vr4300.o): Remove unnecessary command. |
| * mips/configure.in: Configure the newly configuable |
| SCRIPTS and BSP. |
| * mips/configure: Re-autoconf. |
| |
| |
| Mon Sep 8 16:53:12 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * mips/Makefile.in (pmon.o): Added compile command that includes |
| PART_SPECIFIC_DEFINES. Don't include cma101.o by default. |
| |
| * mips/configure.in (part_specific_defines): New variable |
| used when building pmon.o. |
| (part_specific_obj): Include cma101.o as well as vr4300.o, |
| since it is board-specific in many ways (and relies on |
| routines in vr4300.o). |
| |
| Mon Sep 8 14:42:44 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips/idt.ld: Add handling of DWARF sections. |
| |
| Sun Sep 7 16:43:05 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips/crt0.S, mips/idtmon.S, mips/vr4300.S: Handle mips16 builds. |
| |
| Thu Sep 4 19:35:12 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * v850/sys/syscall.h: Match with what is in newlib. |
| |
| Mon Sep 1 12:43:50 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * v850/sys/syscall.h: New file. |
| |
| Thu Aug 28 17:27:16 1997 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * rs6000/ads.ld: Define ram region. |
| (__stack): Fix value. |
| * rs6000/crt0.S: Clear the sbss area as well as bss. |
| |
| Tue Aug 26 16:22:36 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k/bcc.ld: Don't use BLOCK for the section addresses. |
| Instead, just force . to be aligned when necessary. |
| * m68k/idp.ld, m68k/mvme135.ld, m68k/mvme162.ld: Likewise. |
| * m68k/sbc5204.ld, m68k/sbc5206: Likewise. |
| |
| Fri Aug 8 14:20:16 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * rs6000/Makefile.in (install-{yellowknife,ads}): The linker |
| scripts are in the source directory, not the object directory. |
| |
| Fri Aug 1 12:21:31 1997 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * rs6000/ads.ld: New file, linker script for 821/860 ADS board. |
| * rs6000/yellowknife.ld: New file, linker script for embedded |
| Yellowknife (CHRP/PPCP) box. |
| * rs6000/Makefile.in: Add rules for ADS and Yellowknife bits, |
| remove references to EVM, don't optimize the test program. |
| * rs6000/crt0.S: Renamed from mvme-crt0.S, is generic. |
| * rs6000/mvme-stack.S: Removed, unnecessary. |
| |
| Tue Jun 3 12:54:59 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * mips/crt0.S: Added GCRT0 #ifdef for profiling support. |
| |
| * mips/Makefile.in (SCRIPTS): Added idtecoff. |
| (PCRT0): Added. |
| |
| * mips/idtecoff.ld: Added. Add crt0.o startup entry. |
| |
| Fri Apr 18 15:54:11 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * m32r/crt0.S: Remove references to .fillinsn. |
| |
| Mon Apr 14 16:34:27 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * testsuite/Makefile.in (INSTALL): Change install.sh to |
| install-sh. |
| |
| Wed Apr 9 15:41:39 1997 Mike Meissner <meissner@cygnus.com> |
| |
| * rs6000/configure.in (AC_PROG_CC): copied from configure.in. |
| * rs6000/configure: Regenerate. |
| |
| |
| Sat Mar 29 12:21:08 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * sparc/(ex930.ld,ex931.ld,ex934.ld}: Set __end as well |
| as _end and end. |
| |
| Fri Mar 28 23:01:38 1997 Mark Alexander <marka@cygnus.com> |
| |
| * mips/lsi.ld: Before setting _gp, use ALIGN(8) instead |
| of ALIGN(16). Remove ALIGN from _gp computation. |
| |
| Mon Mar 17 10:00:29 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips/idtmon.S: Added magic number for _flush_cache slot. |
| |
| Fri Mar 14 14:36:06 1997 J.T. Conklin <jtc@beauty.cygnus.com> |
| |
| * m68k/Makefile.in (install): Fix typo. |
| |
| * m68k/crt0.S: Changed to use correct loop condition for coldfire. |
| |
| Wed Mar 12 16:00:51 1997 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * sparc/Makefile.in: Add rules for above. |
| (701_OBJS): Add salib-701.o, sparclet-stub.o. |
| [Brought over from Nov 5 change in sparclet branch.] |
| |
| * sparc/salib-701.c (flush_i_cache): Implement cache flushing to fix |
| intermittent problems with gdb stub and breakpoints. Fixes pr 11755. |
| |
| Wed Mar 12 15:49:30 1997 J.T. Conklin <jtc@cygnus.com> |
| |
| * m68k/sbc5204: Fix GROUP specifier. |
| * m68k/sbc5206: Likewise. |
| |
| Tue Mar 11 13:43:49 1997 J.T. Conklin <jtc@cygnus.com> |
| |
| * m68k/Makefile.in (all): Fix typo. |
| |
| * m68k/crt0.S: Use cmpl #0,aX instead of cmpw #0,aX as the latter |
| is an invalid instruction on the coldfire. |
| |
| Fri Mar 7 19:42:50 1997 Mark Alexander <marka@cygnus.com> |
| |
| * mips/lsi.ld: New file. |
| * mips/lsipmon.S: New file. |
| * Makefile.in: Add support for LSI variant of PMON (MiniRISC board). |
| * pmon.S: Ditto. |
| |
| Fri Mar 7 10:29:11 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips/regs.S (pc): Define. |
| |
| Thu Mar 6 18:11:57 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * mips/pmon.S (INDIRECT): For a target that uses the 64-bit |
| ABI, set up the stack for a 32-bit call before actually calling |
| PMON. |
| |
| * mips/regs.S: K1BASE needs to be a 64-bit value on a machine |
| with 64-bit pointers. |
| |
| * mips/syscalls.c (sbrk): Use size_t instead of unsigned int |
| when comparing pointers. |
| |
| Wed Mar 5 15:44:04 1997 Doug Evans <dje@seba.cygnus.com> |
| |
| * m32r/crtsysc.c (_sbrk): Change _end decl to __model__ (__medium__). |
| * m32r/Makefile.in (m32r-stub.o): Use MULTISRCTOP to find m32r-stub.c. |
| |
| Tue Mar 4 07:01:44 1997 J.T. Conklin <jtc@cygnus.com> |
| |
| * m68k/crt0.S: Use cmpw #0,aX instead of tstl aX, as the latter is |
| an invalid addressing mode on the 68000 core. |
| |
| Mon Mar 3 16:38:19 1997 Jim Wilson <wilson@cygnus.com> |
| |
| * mips/crt0.S: Subtract 24 instead of 8 when computing sp. |
| |
| Mon Mar 3 13:35:20 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * m32r/m32r-lib.c: New file. |
| * m32r/{eva,eva-stub}.ld: New files. |
| * m32r/Makefile.in: Build and install them. |
| Also build and install m32r-stub.o. |
| |
| Tue Feb 25 11:59:20 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips/configure.in (LIB_AC_PROG_CC): copied from configure.in. |
| * mips/configure.in (AC_PROG_CC): replaced by LIB_AC_PROG_CC |
| can't do final link until libs in this directory are built. |
| * mips/configure: regenerated. |
| |
| Tue Feb 25 00:31:27 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips/crt0.S: Call hardware_init_hook and software_init_hook via |
| a register, to avoid relocation overflow if they are zero. |
| |
| Mon Feb 24 22:25:49 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips/Makefile.in (IDTOBJS,PMONOBJS): Part specific modules |
| can now be configured by part_specific_obj. |
| * mips/configure.in (part_specific_obj): added. |
| * mips/configure: regenerate. |
| |
| Fri Feb 21 14:29:54 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * m32r/crtsysc.c (_sbrk): Declare _end with __attribute ((__sym32__)). |
| |
| Fri Feb 21 10:10:55 1997 Jim Wilson <wilson@cygnus.com> |
| |
| * mips/ddb.ld: Align the location counter before setting _gp, and |
| before setting edata. Remove ALIGN from _gp computation. |
| * mips/idt.ld, mips/pmon.ld: Before setting _gp, use ALIGN(8) instead |
| of ALIGN(16). Remove ALIGN from _gp computation. |
| |
| Thu Feb 20 17:30:41 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips/array.ld: Add mips16 sections. |
| * mips/ddb.ld, mips/idt.ld, mips/pmon.ld: Likewise. |
| |
| * mips/crt0.S (zerobss): Use subu, not sub. |
| |
| Tue Feb 18 17:25:56 1997 Mark Alexander <marka@cygnus.com> |
| |
| * mips/crt0.S: Add .ent lines for all code fragments, so |
| that objdump --disassemble will display them correctly. |
| |
| Fri Feb 14 11:07:20 1997 J.T. Conklin <jtc@cygnus.com> |
| |
| * m68k/mvme-stub.c: New file. Common debugger stub used for mvme- |
| based targets. This should eventually be merged with or replaced |
| by the m68k stub from gdb. |
| * m68k/{mvme135-stub.c, mvme162lx-stub.c}: Removed. |
| * m68k/Makefile.in: Updated for above change. |
| |
| * m68k/{mvme135-asm.S, mvme162lx-asm.S}: Removed all whitespace |
| differences and changed to consistantly use the IMM macro for |
| immediate constants. It is now possible to compare these two |
| files without having to filter out insignificant differences. |
| |
| * m68k/mvme135-stub.c (set_debug_traps): Renamed from |
| init_debug_traps to match documentation and other sample debugger |
| stubs. |
| |
| * m68k/sbc5204.ld: New file, linker script for Arnewsh SBC5204. |
| |
| * m68k/sbc5206.ld: New file, linker script for Arnewsh SBC5206. |
| |
| * m68k/Makefile.in (DBUG_OBJ, DBUG_BSP): New BSP for coldfire |
| targets running the dbug monitor. |
| |
| * m68k/{dbug-exit.S,dbug-inbyte.S,dbug-outbyte.S}: New files. |
| |
| Thu Feb 6 13:31:06 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * m68k/crt0.S: Don't use SYM to refer to symbols defined |
| in the linker script. |
| |
| Thu Jan 16 10:34:36 1997 Jim Wilson <wilson@cygnus.com> |
| |
| * mips/{ddb.ld,idt.ld,pmon.ld}: Readd OUTPUT_FORMAT definition. |
| |
| Wed Jan 8 14:49:26 1997 Jim Wilson <wilson@cygnus.com> |
| |
| * mips/crt0.S (_start): Don't try to use FPU registers if |
| __mips_soft_float is defined. |
| |
| Fri Dec 27 15:41:08 1996 Bob Manson <manson@charmed.cygnus.com> |
| |
| * sparc/Makefile.in (splet-install): Add tsc701.ld. |
| |
| Thu Dec 26 14:59:34 1996 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * sparc/sparclet-stub.c: Add support for "P" protocol command. |
| Add support for %cc coprocessor registers, %asr registers. |
| Work-around broken SAVE instruction on sparclet. |
| |
| Tue Dec 24 22:15:53 1996 Angela Marie Thomas (angela@cygnus.com) |
| |
| * mips/pmon.S: add an INDIRECT for _flush_cache to be the |
| same as mon_flush_cache. This fixes failures in "make check" |
| |
| Mon Dec 23 18:08:05 1996 Jim Wilson <wilson@cygnus.com> |
| |
| * mips/syscalls.c (__errno, _raise): Delete. |
| |
| Wed Dec 18 17:29:28 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips/idt.ld: Align the location counter before setting _gp, and |
| before setting edata. |
| * mips/pmon.ld: Likewise. |
| |
| Sat Dec 14 21:52:40 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Use a special version of AC_PROG_CC. Autoconf |
| 2.12 introduced a check for whether the compiler works, and that |
| check will fail for a cross compilers without a complete set of |
| libraries. |
| |
| Fri Dec 13 10:40:14 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * sbrk.c: Set the heap pointer to the address of _end, not the |
| value. |
| |
| Wed Dec 11 15:26:50 1996 Jim Wilson <wilson@cygnus.com> |
| |
| * mips/{ddb.ld,idt.ld,pmon.ld}: Delete OUTPUT_FORMAT definition. |
| |
| Fri Dec 6 15:52:36 1996 Jim Wilson <wilson@cygnus.com> |
| |
| * mips/crt0.S: Delete unreachable instruction after exit call. |
| Move exit call before .end _start. |
| |
| Tue Nov 26 15:05:26 1996 Doug Evans <dje@rtl.cygnus.com> |
| |
| * configure: Regenerate with autoconf 2.12. |
| |
| Mon Nov 11 15:12:08 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * config/ppc.mh: New PowerPC eabi target specific config file. |
| Always use -mrelocatable-lib -mno-eabi. |
| |
| * rs6000/configure.in (host_makefile_frag): Use config/ppc.mh. |
| * rs6000/configure: Regenerate. |
| |
| * rs6000/{mvme,sim}-crt0.o (_start): Make initial stack frame 64 |
| bytes, not 56 so that it is aligned to a 16 byte boundary. |
| |
| Tue Nov 5 10:24:29 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc/Makefile.in (crt0-701.o): Use default rule to build. |
| * sparc/crt0-701.S: Second pass at little endian support. |
| |
| Tue Nov 5 10:08:40 1996 Dawn Perchik <dawn@critters.cygnus.com> |
| |
| * sparc/{salib-701.c,sparclet-stub.c,tsc701.ld}: New files. |
| * sparc/Makefile.in: Add rules for above. |
| (701_OBJS): Add salib-701.o, sparclet-stub.o. |
| |
| Fri Nov 1 21:50:12 1996 Angela Marie Thomas (angela@cygnus.com) |
| |
| * mips/ddb.ld: rename cairo.ld to ddb.ld |
| * mips/Makefile.in: rename cairo to ddb |
| |
| Thu Oct 31 13:54:58 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * sh/sh1lcevb.ld, sh/sh2lcevb.ld, sh/sh3lcevb.ld: New files, |
| linker scripts for Hitachi eval boards. |
| |
| Thu Oct 31 12:39:53 1996 Doug Evans <dje@seba.cygnus.com> |
| |
| * m32r/crt0.S: Set up fp. Speed up zeroing of bss. |
| |
| Sun Oct 27 20:34:27 1996 Mark Alexander <marka@cygnus.com> |
| |
| * mips/crt0.S: Initialize gp register correctly. |
| |
| Tue Oct 22 12:02:19 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * m32r/sys/syscall.h: New file. |
| * m32r/crt0.S: Rewrite. |
| * m32r/crtsysc.c (__trap): Adjust literal and comment syntax. |
| |
| Thu Oct 17 13:47:54 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * m32r/syscalls.c: Deleted, renamed to |
| * m32r/crtsysc.c: this. |
| * m32r/Makefile.in: Updated. |
| |
| Mon Sep 30 11:42:08 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * m32r/{Makefile.in,configure.in,configure}: New files. |
| * m32r/{crt0.S,syscalls.c,trap.S}: New files. |
| * configure.in: Recognize m32r-*-*. |
| * configure: Regenerated. |
| |
| Thu Sep 26 10:59:25 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * mips/crt0.S (_exit): Update terminating break instruction to use |
| an explicit high value. |
| |
| Mon Sep 23 19:02:32 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * sh: New directory, Hitachi SH libgloss support. |
| * sh/sh3bb.ld: New file, SH3 big box linker script. |
| |
| Thu Sep 19 12:02:23 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips/crt0.S (zerobss): Use bltu in zerobss loop, not bne, in |
| case the end symbol is not aligned. |
| |
| Sun Sep 15 12:23:47 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * mips/vr4300.S (__cpu_flush): Fix lui constant. |
| * mips/crt0.S (init): Fix passing of arg0 through exit() and |
| _exit(). |
| * mips/syscalls.c (__errno): Return address of errno, rather than |
| NULL. |
| |
| Wed Sep 11 10:45:13 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * m68k/bcc.ls, m68k/idp.ld, m68k/mvme135.ld, m68k/mvme162.ld: |
| Merge .init and .fini sections into .text to fix a.out. |
| |
| Sun Sep 8 09:50:08 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * m68k/bcc.ls, m68k/idp.ld, m68k/mvme135.ld, m68k/mvme162.ld: |
| Many fixes for problems discovered during testing. Make stack end |
| at end of ram. Force __CTOR_LIST__ and __DTOR_LIST__ to be |
| longword aligned. Move .shdata out of .text section. Put .rodata |
| and .gcc_except_table into .text section. Get rid of .shbss |
| section, load it into .bss. Remove bogus start address |
| calculation for .bss. Force all sections to be longword aligned. |
| Create .init and .fini sections (including function prologues and |
| epilogues) for ELF support. |
| * cpu32bug.S cpu32bug.h: Move defs for cpu32bug monitor into |
| cpu32bug.h. Make sure that cpu32bug function codes aren't global. |
| Remove creation of vbr_table. Fix function prologue in _exit. |
| Use fp instead of a6. Add .text pseudo-op to the beginning of |
| each function. |
| * crt0.S: Remove global symbols zeroboss, init and launch. Make |
| main, exit, hardware_init_hook, software_init_hook, atexit and |
| __do_global_dtors extern, not global. Fix logic error when |
| initializing stack pointer. It now loads sp if __stack is non- |
| zero. Reverse order of software and hardware init hooks. |
| Hardware now comes first. Add call to __INIT_SECTION__, and |
| register __FINI_SECTION__ with atexit. This is needed to make ELF |
| static constructors and destructors work right. |
| |
| Tue Sep 3 11:55:01 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k/bcc.ld: Set address of .stab and .stabstr to 0, not `.'. |
| * m68k/idp.ld, m68k/mvme135.ld, m68k/mvme162.ld: Likewise. |
| * hp74x/hppa.c, rs6000/evm.ld, sparc/ex930.ld: Likewise. |
| * sparc/ex931.ld, sparc/ex934.ld, sparc/sim.ld: Likewise. |
| |
| Fri Aug 30 15:57:37 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * mips/Makefile.in (SCRIPTS): Add cairo. |
| (vr4300.o:): Force build with target CFLAGS to ensure correct |
| multilib endianness. The -Tcairo.ld target uses libpmon.a aswell |
| as the -Tpmon.ld target. |
| * mips/{idt.ld,pmon.ld}: Remove explicit crt0.o include. |
| * mips/cairo.ld: Added. |
| * mips/crt0.S: Restore atexit() call. Fix startup stack |
| initialisation. |
| * mips/pmon.S: Fix monitor indirection to be 64bit clean. |
| * mips/vr4300.s: Added simple bus error handler to cope with |
| sizing memory that doesn't ghost, but does abort. |
| * mips/cma101.c: Improve the memory sizer. |
| * mips/regs.S: Add definitions for SR_KX, SR_SX and SR_UX. |
| |
| Thu Aug 29 17:07:45 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * a29k/configure.in (i[345]86-*-*): Recognize i686 for pentium |
| pro. |
| * testsuite/libgloss.all/configure.in (i[345]86-*-*): Ditto. |
| * a29k/configure: Regenerate. |
| |
| Thu Aug 22 10:31:38 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/Makefile.in (install{,-linux,-solaris}): Add install of |
| Linux, Solaris libraries if built. |
| |
| Fri Aug 16 10:12:48 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * m68k/Makefile.in: Add -nostdlib to the test targets. |
| * m68k/{idp,bcc,mvme135,mvme162}.ld: Move the CTORS and DTORS from |
| .data to .text where they really belong. |
| * m68k/crt0.S(launch): Don't put __do_global_dtors into atexit, |
| GCC is supposed to do this in __main. |
| |
| Mon Aug 5 15:04:34 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc/libsys/isatty.c: New file. |
| |
| Sun Aug 4 22:32:14 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * pa/Makefile.in: Build the test case as seperate targets. |
| * pa/{w89k,op50n}.ld: Use GROUP rather than INPUT to get all the |
| libraries. |
| |
| Fri Aug 2 18:25:07 1996 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * m68k/Makefile.in: Install common crt0.o, remove old references |
| to per-bsp crt0's. |
| |
| Tue Jul 30 21:48:05 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * sparc/Makefile.in: Built crt0.S, not crto.s. |
| * sparc/crt0.S: Don't use REGS macro, use % always. |
| * sparc/salib.c: Add a prototype for putDebugChar. |
| |
| Tue Jul 23 15:12:42 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc/{sysc-701.c,crt0-701.S}: New files. |
| * sparc/Makefile.in (all): Build them. |
| ($(701_BSP),crt0-701.o): New targets. |
| ($(CRT0),$(SIM_CRT0),dtor.o): Don't use $<, for sunos make. |
| (all): Depend on $($(CPU)_ALL). |
| (install): Use $(INSTALL_DATA), not $(INSTALL_PROGRAM). |
| Depend on $($(CPU)_INSTALL). |
| * sparc/configure.in (libgloss_topdir): Delete unnecessary $(srcdir). |
| (AC_CONFIG_AUX_DIR): Call. |
| (CPU): Define. |
| * sparc/configure: Regenerated. |
| |
| Mon Jul 22 14:32:39 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * config/{default.mt,mips.mt}: Don't use $<, for sunos make. |
| |
| Mon Jul 22 15:54:02 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k/crt0.S (zerobss): Don't use dbra if __mcf5200__. |
| |
| Sun Jul 14 16:47:14 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * lseek.c (lseek): Don't use SET_ERRNO. |
| * open.c (open): Ditto. |
| |
| Wed Jul 3 18:19:10 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * sparc/Makefile.in: Install ex930/931/934.ld files. |
| * sparc/configure, sparc/configure.in: Use AC_CANONICAL_SYSTEM to |
| define target_alias to make install work from this directory. |
| |
| Wed Jul 3 18:04:49 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in: Make sure we always have an argument to for. Make |
| sure rootpre and srcrootpre are always set before using |
| FLAGS_TO_PASS. |
| |
| Tue Jul 2 18:04:31 1996 J.T. Conklin <jtc@hippo.cygnus.com> |
| |
| * glue.h (SET_ERRNO): Removed. |
| * sbrk.c, stat.c, unlink.c: Don't use SET_ERRNO. |
| |
| Mon Jul 1 14:24:51 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/Makefile.in: Add $(srcdir)/.. dependencies for all files |
| in the toplevel. |
| |
| Sat Jun 29 23:26:39 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * mips/cma101.c (DOSYNC): Explicitly select -mips2 for the |
| assembly of the "sync" instruction. |
| * mips/Makefile.in: Removed special cma101.o build. Seperate |
| install.sh invocations for the BSP libraries. |
| |
| Sat Jun 29 08:17:52 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * doc/porting.texi (GNU remote protocol): Fix bad texinfo. |
| |
| Fri Jun 28 23:16:37 1996 Rob Savoye <rob@chinadoll> |
| |
| * sparc/traps.S: Don't use REGS macro, use % always. |
| * sparc/Makefile.in: Add -nostdlib when building the test cases, |
| as gcc keeps thinks it wants two crt0.o. |
| * sparc/asm.h: Don't define the REGS macro, we'll use explicit |
| register prefixes. Always define USER_LABEL_PREFIX cause gcc is |
| broken, and I doubt it'll get fixed. |
| |
| Sat Jun 29 05:05:15 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * mips/crt0.S (zerobss): Fix the stack-pointer calculation. |
| |
| Thu Jun 27 17:23:33 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips/Makefile.in (vr4300.o): Pass -mips3 after $(ASFLAGS). |
| (cma101.o): Pass -mips2 after $(CFLAGS). |
| |
| Tue Jun 25 22:48:15 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) |
| |
| * Makefile.in (bindir, libdir): Use autoconf-set values. |
| * configure: Rebuilt. |
| |
| * doc/Makefile.in (mandir, infodir): Use autoconf-set values. |
| * doc/configure.in (AC_PREREQ): autoconf 2.5 or higher. |
| * doc/configure: Rebuilt. |
| |
| * {a29k,hp74x,i960,m68k,mips,pa,rs6000,sparc,sparc/libsys}/Makefile.in |
| (bindir, libdir): Use autoconf-set values. |
| * {a29k,hp74x,i960,m68k,mips,pa,rs6000,sparc,sparc/libsys}/configure.in |
| (AC_PREREQ): autoconf 2.5 or higher. |
| * {a29k,hp74x,i960,m68k,mips,pa,rs6000,sparc,sparc/libsys}/configure: |
| Rebuilt. |
| |
| Mon Jun 24 22:01:11 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * sparc/crt0.S: Set the stack to the upper part of memory. Execute |
| hardware_init_hook and software_init_hook if they exist with a |
| legit address. Drop into exit after main. Zero the bss section. |
| * sparc/ex930.ld: PROVIDE hardware_init_hook and |
| software_init_hook. |
| |
| Mon Jun 24 19:44:45 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips/Makefile.in (cma101.o): Use -mips2 option when compiling. |
| |
| Wed Jun 19 13:57:36 1996 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * debug.[ch]: New files for GDB stub support. |
| * config/default.mt: Add rules for debug.o. |
| * config/default.mh: Add rule for building C++ source. Add $srcdir |
| to INCLUDES so shared header files can be found. |
| |
| * sparc/salib.c(exceptionHandler): Range check the vector number |
| so we get a legit %tbr value. Add wrappers so inbyte and outbyte |
| work. |
| * sparc/crt0.s: Handle cpus that don't have FP support. |
| * sparc/Makefile.in: Add multilib support. Add variable for |
| objcopy and objdump. Build the BSPs as archive libraries, not |
| object files. Add support for the SIS sparc simulator. Build the |
| test case srecords and dissasembly as seperate makefile |
| targets. Also optionally build the C++ test case. Use a target |
| makefile fragment. |
| * sparc/configure.in: Add multilib support. |
| * sparc/configure: Regenerated. |
| * sparc/asm.h: Macros to deal with aout and coff formats portably. |
| * sparc/slite.h: Sparclite specific stuff. |
| * sparc/{sim-crt0.S,sim-stub.c,sim-io.c,sim.ld}: New support for |
| the SIS sparc simulator. |
| * sparc/traps.S: Generic trap handlers for SIS and ex93x targets. |
| * sparc/tests.c: Test case for linking and GDB protocol. |
| |
| Tue Jun 18 20:06:16 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * pa/Makefile.in: Build the test case srecords and dissasembly |
| as seperate makefile targets. Also optionally build the C++ test |
| case. |
| * pa/crt0.S: If __stack and __globals have a legit address, use |
| that for %sp and %gp. Execute hardware_init_hook and |
| software_init_hook if they exist with a legit address. Add |
| __do_global_dtors() to the atexit array. |
| * pa/{w89k,op50n}.ld: Use GROUP rather than INPUT to get the |
| libraries. Allocate the stack and global spaces from the top of |
| memory. PROVIDE hardware_init_hook and software_init_hook. |
| |
| * m68k/Makefile.in: Build the test case srecords and dissasembly |
| as seperate makefile targets. Also optionally build the C++ test |
| case. |
| * m68k/asm.h: Don't define __USER_LABEL_PREFIX__ and |
| __REGISTER_PREFIX__ ourselves since suprisingly gcc sets them |
| correctly for a change. |
| * m68k/{bcc,mvme135,mvme162,idp}.ld: Use the same crt0 rather than |
| building seperate ones. PROVIDE hardware_init_hook and |
| software_init_hook. Stick the Constructors and Destructors in |
| .data cause they don't work in .text (which is where they should |
| really be). |
| * m68k/cpu32bug: Add a few more traps to support the older ABug |
| monitor. |
| * m68k/crt0.S: If __stack is isn't set, set the stack to the top |
| of memory. Excecute hardware_init_hook and software_init_hook if |
| they exist with a legit address. Add __do_global_dtors() to the |
| atexit array. |
| |
| * rs6000/Makefile.in: Use the linker script to build the test |
| case. Also build a C++ test case. |
| * rs6000/dtor.C: Test contructors and destructors. |
| * rs6000/{sim,mvme}.ld: New linkers scripts for the simulator and |
| the mvme board. |
| * rs6000/evm.ld: Provide hardware_init_hook and software_init_hook |
| so we can test for them in the crt0.S. |
| * rs6000/crto.S: Excecute hardware_init_hook and |
| software_init_hook if they exist with a legit address. |
| |
| Mon Jun 17 18:39:17 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * mips/Makefile.in: Replace the "test" target with seperate |
| targets for the dissasembled file, and the srecord. |
| * mips/configure.in: Use a target makefile fragment. |
| * mips/configure: Regenerate. |
| * mips/idt.ld: Add a comment on producing srecords. Setup a space |
| for the stack. PROVIDE hardware_init_hook and software_init_hook. |
| * mips/crt0.S: Make a small stack. Run memsize() using the temp |
| stack, and then set the stack to the top of memory. Also grab some |
| space for the globals. Add __do_global_dtors() to the atexit |
| array. Call _exit from newlib so the atexit array gets run, then |
| exits. |
| |
| Thu Jun 13 15:44:46 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips/Makefile.in (vr4300.o): Use -mips3 option when assembling. |
| |
| Sat Jun 1 16:27:53 1996 Michael Meissner <meissner@wogglebug.tiac.net> |
| |
| * rs6000/simulator.S (open, close, lseek): Add system calls. |
| * rs6000/Makefile.in (OBJS): Don't put open.o, close.o, lseek.o |
| here. |
| (SIM_OBJS): Put them here instead. |
| |
| Tue Apr 30 20:01:08 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * m68k/crt0.S: Don't allocate __stack in the .bss section. |
| * m68k/{idp,mvme135,mvme162,bcc}.ld: Set __stack to a word below |
| the top of memory. Use "-l" in GROUP rather than the full name so |
| it'll get found using the path lookup in LD. Also link in libgcc |
| too. Don't set __lstack anymore. |
| * m68k/Makefile.in: Build test as a series of Makefile targets, |
| rather than as a big loop. |
| |
| Thu Apr 25 08:38:15 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/mvme-stack.S: New file, define __stack. |
| * rs6000/mvme-crt0.S (_start): If __stack is not 0, use that for |
| the stack address. |
| |
| Thu Apr 25 06:42:02 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * rs6000/Makefile.in: Add support for multilib. |
| * rs6000/configure.in: Ditto. |
| * rs6000/configure: Regenerate. |
| |
| Wed Apr 24 11:02:33 1996 Doug Evans <dje@blues.cygnus.com> |
| |
| * sparc/libsys/Makefile.in (isatty.o): Add rule for SunOS VPATH. |
| |
| Fri Apr 19 13:23:31 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * {mips,a29k,pa}/configure.in: Add support for multilibs |
| by using config-ml.in. |
| * {mips,a29k,pa}/configure: Regenerate. |
| * {mips,a29k,pa}/Makefile.in: Build archive libraries, |
| not objects for the BSPs. |
| |
| Fri Apr 19 12:33:25 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/sol-crt0.c: Delete, file moved into gcc directory. |
| |
| Mon Apr 15 14:09:26 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/simulator.S: Call _cerror to save errno if an error |
| occurred. |
| * rs6000/sim-errno.c (_cerrno): New function to set errno. |
| |
| Thu Apr 11 14:19:01 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/sol-{crt0.c,syscall.S,cfuncs.c}: New files to support |
| libgloss on PowerPC Solaris. |
| |
| * rs6000/Makefile.in: Add Solaris support. |
| |
| Tue Apr 16 17:43:06 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * Makefile.in: Don't do anything if SUBDIRS is empty. |
| |
| Mon Apr 15 15:37:52 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * configure.in, m68k/configure.in: Add support for multilibs by |
| using config-ml.in. |
| * m68k/crt0.S: If a value for __stack hasn't been specified, |
| initialize %sp to some memory in .bss. |
| * m68k/Makefile.in: Build archive libraries, not objects for the |
| BSPs. Build multiple copies of the crt0.o, one for each target. Add |
| support to build multilibs. |
| * idp.ld, bcc.ld, mvme135.ld, mvme162.ld: Use GROUP to look for |
| libc.a and the BSP rather than INPUT an object. Get the right |
| crt0.o. |
| |
| Tue Apr 9 23:31:53 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k/cpu32bug.S (getDebugChar): Use extw/extl rather than |
| extbl, so it can be used on a 68000. |
| |
| Wed Mar 27 17:18:01 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/{mvme-exit,simulator}.S (_exit): Loop on a trap |
| instruction following the _exit system call. This also makes sure |
| that the debugger reports the address as being in _exit, rather |
| than whatever function follows _exit. |
| |
| Fri Mar 15 12:30:02 1996 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * i960/{Makefile.in,asm.h,configure,configure.in,mon-read.c, |
| mon-syscalls.S,mon-write.c}: Initial support for MON960. |
| * configure.in: Add support for i960. |
| * configure: Rebuild with autoconf 2.8. |
| |
| Fri Mar 8 18:12:52 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * a29k/configure.in: Call AC_CONFIG_AUX_DIR. |
| * a29k/configure: Rebuild with autoconf 2.7. |
| * m68k/configure.in: Call AC_CONFIG_AUX_DIR before |
| AC_CANONICAL_SYSTEM. |
| * mips/configure.in, pa/configure.in: Likewise. |
| * rs6000/configure.in: Likewise. |
| * m68k/configure, mips/configure, pa/configure: Rebuild. |
| * rs6000/configure: Rebuild. |
| |
| Fri Mar 8 08:11:14 1996 Doug Evans <dje@charmed.cygnus.com> |
| |
| * sparc/libsys/sbrk.S (curbrk): Moved from here, |
| * sparc/libsys/cerror.S (curbrk): To here. |
| |
| Thu Mar 7 11:39:09 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * mips/crt0.S (bssloop): Updated comment to reflect the source. |
| |
| Wed Mar 6 18:12:25 1996 Doug Evans <dje@charmed.cygnus.com> |
| |
| * configure.in (sparclet-*-aout*): Add entry. |
| * configure: Regenerated. |
| * sparc/libsys/{Makefile.in,configure.in,configure,isatty.c, |
| libsys-crt0.S,sbrk.S,syscall.h,syscallasm.h,template.S,template_r.S}: |
| New files. |
| |
| Fri Feb 23 22:21:07 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * a29k: New dir for a29k-coff support for the AMSAT Phase-3D |
| satellite. (doesn't use udi) |
| * a29k/{29200-io.c,Makefile.in,configure,configure.in,README,crt0.s, |
| p3dgps.ld,sa29200.ld,sa29200b.ld,test.c: New files for a29k |
| support. |
| * a29k/sys/{cpudef.h,intrinsi.h,macros.h,romdcl.h,sysmac.h, |
| fpsymbol.h,libconfig.h,proreg.h,smartmac.h}: New files for a29k |
| support. |
| * configure.in: Add support for a29k. |
| * configure: Rebuild. |
| |
| Thu Feb 22 13:32:28 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/mvme-read.c (read): New file, if large read, do a .INLN |
| system call, instead of sucessive .INCHR system calls. Map \r on |
| input to \n. |
| |
| * rs6000/mvme-inbyte.S: Add stub for new input system calls. |
| |
| * rs6000/Makefile.in (MVME_OBJS): Add mvme-read.o, delete read.o |
| |
| Wed Feb 21 16:45:19 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/mvme-print.c: New file, map write into sequences of |
| .OUTLN/.OUTCHR/.PCRLF rather than just using .OUTCHR. |
| |
| * rs6000/mvme-outbyte.S: Add stubs for new output system calls. |
| |
| * rs6000/Makefile.in (MVME_OBJS): Add mvme-print.o, delete print.o |
| and write.o. |
| |
| Thu Feb 15 11:37:02 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * mips/{mipsidt,mipspmon}.ld: Added OUTPUT_ARCH definition. |
| * mips/cma101.c (time): Added time() function. |
| |
| Tue Feb 13 10:36:07 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * mips/vr4300.S (__cpu_flush): Fix loop counter. |
| |
| Tue Jan 30 15:41:19 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * mips/syscalls.c: Used include file, rather than local manifest |
| definitions. |
| * mips/crt0.S: Removed IDT monitor entry points. |
| * mips/Makefile.in: Construct mipsidt and mipspmon BSP files. |
| * mips/{cma101.c,idtmon.S,pmon.S,regs.S,vr4300.S}: Added. |
| * mips/{mipspmon.ld}: Added. |
| |
| Sun Jan 28 08:01:31 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/configure.in (AC_INIT): Use sim-crt0.S, not crt0.s. |
| * rs6000/configure: Regenerate. |
| |
| Wed Jan 24 14:26:01 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/{mvme,sim}-crt0.S (__atexit): Put the __atexit variable |
| in the .sdata section, and provide a fixup for the address, in |
| order to support the new -msdata compiler flag. |
| |
| Thu Jan 11 11:24:25 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/{mvme,sim}-crt0.S (__atexit): Provide address of atexit, |
| so eabi-ctors in libgcc.a can know to register the function to |
| call all of the destructors. |
| |
| Sat Dec 30 14:31:37 1995 Doug Evans <dje@canuck.cygnus.com> |
| |
| * configure.in (AC_CONFIG_AUX_DIR): Adjust to new build tree layout. |
| * {doc,hp74x,m68k,mips,pa,rs6000,sparc}/configure.in |
| (AC_CONFIG_AUX_DIR): Define |
| * {,doc,hp74x,m68k,mips,pa,rs6000,sparc}/configure: Regenerated. |
| |
| Mon Dec 11 12:20:24 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in (FLAGS_TO_PASS): Add INSTALL, INSTALL_PROGRAM, |
| and INSTALL_DATA. |
| |
| Fri Dec 1 16:54:15 1995 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * mips/syscalls.c (sbrk): Fixed memory addressing. System call |
| returns size, not (last address + 1). |
| |
| Thu Nov 16 13:47:57 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * config/default.mh: Don't define CC_FOR_TARGET, AS_FOR_TARGET, |
| AR_FOR_TARGET, LD_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET, |
| OBJDUMP_FOR_TARGET, or OBJCOPY_FOR_TARGET. Change the build rules |
| to use CC, etc., instead of CC_FOR_TARGET, etc. |
| * configure.in, */configure.in: Get values for CC, AS, AR, LD, and |
| RANLIB. Always use default.mh. |
| * Makefile.in (FLAGS_TO_PASS): Pass down LD. |
| * Makefile.in, */Makefile.in: Let CC, AS, AR, LD, and RANLIB by |
| substituted by the autoconf configure script. Use them instead of |
| the *_FOR_TARGET variants. |
| * hp74x/configure.in: Don't call AC_CANONICAL_SYSTEM. |
| * m68k/configure.in: Call AC_ARG_PROGRAM. |
| * mips/configure.in, pa/configure.in: Likewise. |
| * rs6000/configure.in: Likewise. |
| * m68k/Makefile.in: Set program_transform_name, OBJDUMP, and |
| OBJCOPY. |
| * mips/Makefile.in, pa/Makefile.in, rs6000/Makefile.in: Likewise. |
| * mips/Makefile.in: Split new test target from all target. |
| * configure, */configure: Rebuild. |
| |
| Tue Nov 14 12:04:36 1995 Angela Marie Thomas (angela@cygnus.com) |
| |
| * Makefile.in: Added prefix, exec-prefix and tooldir to |
| FLAGS_TO_PASS so vaulting works correctly. |
| |
| Tue Nov 14 18:32:41 1995 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * mips/mipsidt.ld: Added. |
| * mips/syscalls.c: Added. |
| * mips/crt0.S: Added FPU presence check, and entry points into IDT |
| monitor. |
| * mips/Makefile.in (all): Updated to build generic IDT monitor |
| crt0.o file. |
| * mips/test.c (main): Removed unnecessary prototypes. |
| * configure.in (configdirs): Removed mips64vr4300 target. |
| * configure: Re-generated. |
| * config/default.mh (OBJDUMP_FOR_TARGET): Added missing parent |
| directory path element. |
| * mipsidt: Directory removed. |
| |
| Fri Nov 10 12:50:03 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in, */configure.in: Don't call AC_ARG_PROGRAM. |
| * configure, */configure: Rebuild. |
| * Makefile.in, */Makefile.in: Don't set program_transform_name. |
| |
| Wed Nov 8 16:19:31 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk> |
| |
| * configure.in (configdirs): Add mips*vr4300*-*-* target. |
| |
| * configure: Re-generated. |
| |
| * mipsidt/crt0.S: Check for FPU presence. |
| |
| * mipsidt/mipsidt.ld: Removed explicit crt0.o from link. |
| |
| * mipsidt/Makefile.in: Explicitly link against crt0.o file. |
| |
| Thu Nov 2 23:27:28 1995 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * config/default.mh: Add additional "../" to path used to find |
| comp-tools binaries in an object tree. |
| |
| Mon Oct 30 18:10:47 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/mvme-crt0.S (_start): Zero out bss before the the program |
| starts. |
| |
| Tue Oct 24 10:07:50 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/mvme-{exit,outbyte,inbyte}.S: Use hex for the system |
| calls, not decimal, since formatting the disk when you intend to |
| write out a character is not nice. |
| |
| Mon Oct 23 22:17:12 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/mvme-crt0.S (_start): Bump sp by -4 before storing end of |
| stack chain to avoid last word indebugger's memory. |
| |
| * rs6000/mvme-{exit,inbyte,outbyte}.S: System call number goes in |
| r10, not r0. |
| |
| Mon Oct 23 17:57:23 1995 James G. Smith <jsmith@jaalfrezi.cygnus.co.uk> |
| |
| * mipsidt/Makefile.in: Removed the LDFLAGS_FOR_TARGET in the test |
| program link. |
| |
| * mipsidt/crt0.S: Changed monitor entry sequence. |
| |
| * mipsidt/syscalls.c: Added local sbrk() function, derived from |
| (libgloss/sbrk.c), but using the monitor routine to ascertain the |
| amount of memory available. |
| |
| Mon Oct 23 11:58:04 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk> |
| |
| * mipsidt: Added (directory). This is a simple crt0 module for the |
| IDT MIPS monitor. The existing "libgloss/mips" directory is for a |
| specific R3000 board, so it was safer creating a new target |
| directory. |
| * mipsidt/Makefile.in: Added. |
| * mipsidt/configure: Added. |
| * mipsidt/configure.in: Added. |
| * mipsidt/crt0.S: Added. |
| |
| * mipsidt/syscalls.c: Added. |
| * mipsidt/test.c: Added. |
| |
| * configure (mips*vr4300*-*-*): Use new mipsidt target directory. |
| |
| Mon Oct 9 21:07:08 1995 Michael Meissner <meissner@cygnus.com> |
| |
| * rs6000/Makefile (all asm rules): Remove asm.h dependency. |
| * rs6000/asm.h: File deleted, moved to gcc directory as ppc-asm.h. |
| * rs6000/mvme-{crt0,exit,inbyte,outbyte}.S: Include ppc-asm.h, not |
| asm.h. |
| * rs6000/sim{-crt0,ulator}.S: Ditto. |
| |
| * rs6000/{mvme,sim}-crt0.S (_start): Don't use FUNC_START/FUNC_END |
| for _start, since the linker needs to see this. |
| |
| Mon Oct 9 12:08:12 1995 Stu Grossman (grossman@cygnus.com) |
| |
| * sparc/sparc-stub.c: include sparclite.h to get access to register |
| fondling macros. |
| * (trap_low): Save and restore FP regs if necessary. Also, clean |
| up save and restore of debug unit regs. |
| * (hard_trap_info): Add more architecturally defined traps. |
| * (set_debug_traps): Only set FP disabled trap if FP is disabled. |
| * (get_in_break_mode): Clean up. Get rid of calls to |
| set_hw_breakpoint_trap(). Also, use write_asi macro |
| * (handle_exception): Clean up `g' and `G' commands. Add `P' |
| command. |
| * (hw_breakpoint): Why was this here!? It's gone now... |
| * sparc/crt0.s: Speed up prom copy loop. Clean up window over/under |
| flow setup. Call main instead of jumping to it. |
| * sparc/salib.c (get_uart_status rcv_char flush_i_cache): Use new |
| and improved read_asi macro. |
| * (win_ovf win_unf): Parameterize window size. |
| * sparclite.h (read_asi): Rewrite so that macro returns an rval. |
| * (read_psr write_psr): New macros to do the obvious. |
| * Add conditionalized code for 933 window size. |
| |
| Fri Oct 6 15:35:01 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/simulator.S (abort): Delete abort. |
| * rs6000/sim-abort.c: New file, to print message that abort was |
| called. |
| * rs6000/Makefile.in (SIM_OBJS): Add sim-abort.o. |
| |
| * rs6000/asm.h (FUNC_NAME, FUNC_START, FUNC_END): New macros that |
| give the start and end of a function written in assembler. If |
| -mcall-aixdesc or -mcall-nt, create a function descriptor and name |
| the real function with one or two leading periods. |
| |
| * rs6000/{simulator,sim-crt0}.S: Use new function macros. |
| * rs6000/mvme-{crt0,exit,inbyte,outbyte}.S: Ditto. |
| |
| * rs6000/Makefile.in: Add asm.h as a dependent for all .S files. |
| Compile the .S files with gcc, so that -mcall-* flags define the |
| appropriate macros. |
| |
| Thu Sep 28 13:49:45 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * sparc/ex93x.ld: Remove crt0.o from INPUT; gcc will normally pass |
| crt0.o anyhow. Add leading underscore to __CTOR_LIST__, et. al. |
| * sparc/salib.c (__main): Comment out empty function. |
| |
| Wed Sep 20 14:36:12 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in (maintainer-clean): New synonym for realclean. |
| * hp74x/Makefile.in (maintainer-clean): Likewise. |
| * m68k/Makefile.in (maintainer-clean): Likewise. |
| * pa/Makefile.in (maintainer-clean): Likewise. |
| * mips/Makefile.in (maintainer-clean): Likewise. |
| * rs6000/Makefile.in (maintainer-clean): Likewise. |
| * sparc/Makefile.in (maintainer-clean): Likewise. |
| * doc/Makefile.in (maintainer-clean): Likewise. |
| * testsuite/Makefile.in (maintainer-clean): Likewise. |
| * testsuite/libgloss.all/Makefile.in (maintainer-clean): Likewise. |
| |
| Sat Sep 16 23:04:11 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/Makefile.in (all): Fix typo preventing simulator from |
| being built. |
| |
| Tue Sep 12 10:43:41 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * rs6000/Makefile.in: Misc mvme support fixes. |
| |
| * rs6000/{mvme-exit.S, mvme-inbyte.S, mvme-outbyte.S}: Strip |
| leading underscores from identifiers. |
| |
| * m68k/asm.h: New file, macro definitions helpful for assembly |
| language programming. |
| * m68k/{cpu32bug.S, crt0.S, mvme.S, mvme135-asm.S, mvme162lx-asm.S}: |
| Use asm.h. |
| |
| * rs6000/{mvme-crt0.S, mvme-exit.S, mvme-inbyte.S, mvme-outbyte.S}: |
| New files, preliminary support for motorola mvme targets running |
| the ppcbug monitor. |
| * rs6000/Makefile.in: Build mvme support. |
| |
| * rs6000/asm.h: New file, macro definitions helpful for assembly |
| language programming. |
| * rs6000/{sim-crt0.S, simulator.S}: Use asm.h. |
| |
| Fri Sep 8 18:51:29 1995 Michael Meissner <meissner@wogglebug.tiac.net> |
| |
| * rs6000/sim-sbrk.c (sbrk): Add cast to silence warning. |
| |
| Fri Sep 8 13:03:12 1995 Brendan Kehoe <brendan@lisa.cygnus.com> |
| |
| * m68k/idp-inbyte.c (READREG): Add volatile to the cast, to avoid |
| reordered insns that can end up being an infinite loop. |
| * m68k/idp-outbyte.c (READREG): Likewise. |
| |
| Wed Sep 6 10:01:33 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/sim-sbrk.c (sbrk): Use the brk system call, instead of |
| using a large static area for the break area. |
| |
| Thu Aug 24 14:57:28 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/Makefile.in (install*): Add separate installation rules |
| for sim and evm targets. |
| |
| Wed Aug 23 16:49:02 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000/sim*: Add PowerPC simulator support. |
| |
| Tue Aug 22 11:52:40 1995 Jeff Law (law@snake.cs.utah.edu) |
| |
| * pa/hp-milli.s: Add entry/exit pseudo-ops around all exported |
| code. Fix callinfo directives to include "millicode" attribute. |
| |
| * pa/hp-milli.s (divU): Fix bug found by arith-rand1.c testing. |
| |
| Mon Aug 21 23:31:42 1995 Jeff Law (law@snake.cs.utah.edu) |
| |
| * pa/crt0.S ($START$): Use local label prefix for local label |
| "bssloop". |
| |
| Mon Aug 14 11:57:46 1995 Kung Hsu <kung@mexican.cygnus.com> |
| |
| * ex93x/sparclite.h: add __WINSIZE. |
| * ex93x/salib.c: Use __WINSIZE, implements write with $O command of |
| stub protocol. |
| |
| Thu Aug 3 14:40:12 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * Makefile.in: Updated to reflect filename changes. |
| |
| * m68k/mc68681-duart.h: Renamed to m68681reg.h. |
| * m68k/mc68681-duart.c: Split up and renamed to idp-inbyte.c and |
| idp-outbyte.c |
| |
| Fri Jul 28 11:23:24 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * m68k/mc68681-duart.h: Removed everything except register offsets. |
| Changed offsets so they reflect actual chip instead of how device |
| is mapped into the IDP address space. |
| * m68k/mc68681-duart.c (DUART_ADDR): New macro, base address. |
| (READREG, WRITEREG): Changed to correspond to unusual way the |
| device is mapped (ie. base address + (reg offset * 4) + 3)). |
| (duart_status, duart_mode, duart_init, duart_restore): Removed, |
| these interfaces were never used and didn't work. |
| (outbyte): Removed unconditional delay. |
| |
| * m68k/crt0.S: Use SYM(_end) instead of end. This completes my |
| change of April 18th which makes the "_end" symbol compatible |
| with both a.out and coff toolchains. |
| (zerobss): Handle zero-length bss. |
| |
| Thu Jul 27 15:35:37 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * configure, {doc, hp74x, m68k, mips, pa, sparc}/configure: |
| regenerated with autoconf 2.4.2. |
| |
| Wed Jul 26 13:42:27 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * doc/porting.texi: Fix typos and spelling errors. |
| |
| Mon Jun 26 09:23:23 1995 Jeffrey A. Law <law@rtl.cygnus.com> |
| |
| * pa/Makefile.in: Enable HP supplied millicode routines. |
| * pa/hp-milli.s: Make sure copyright notice gets included |
| in objects files. |
| |
| * pa/crt0.S ($START$): Use "%" instead of "'" to avoid losing whe |
| run through cpp. |
| |
| Fri Jun 16 18:40:22 1995 Jeffrey A. Law <law@rtl.cygnus.com> |
| |
| * pa/crt0.S ($START$): Use long-calls to call main and exit. |
| |
| Tue Jun 13 16:05:13 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * pa/crt0.S: Call exit() after returning from main. |
| |
| Tue Jun 13 10:43:14 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * Makefile.in, {doc, hp74x, m68k, mips, pa, sparc}/Makefile.in |
| (distclean, realclean): Remove autoconf-generated config.cache |
| and config.log files. |
| |
| Mon Jun 5 15:56:22 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * config/{default.mh, dos.mh} (CFLAGS_FOR_TARGET): Added -O2. |
| (.c.o, .s.o, .S.o, etc.): Don't use @ to hide how the compiler |
| is invoked, it makes it much more difficult to debug. |
| |
| Tue May 30 19:07:59 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * testsuite/libgloss.all/math.c: Add additional tests for modulo. |
| |
| Mon May 29 13:03:39 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * stat.c: Add const so it works with newlib's stat.h. |
| |
| Thu May 25 16:28:42 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * m68k/mvme.S: Extend sign using two instructions rather than one |
| so it'll work on a stock mc68000. |
| |
| Tue May 23 18:12:19 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * close.c, stat.c, fstat.c, open.c, lseek.c, print.c, putnum.c, |
| unlink.c read.c, sbrk.c, getpid.x, kill.c: New files that used to |
| be glue.c. |
| * {m68k,pa,mips}/Makefile.in: Build using broken up glue.c. |
| * pa/Makefile.in: Make all just build BSP, add seperate test |
| target. |
| * most files: add Cygnus BSD-style copyright message. |
| |
| Tue May 23 12:58:03 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * configure.in, {hp74x, m68k, mips, pa, sparc}/configure.in: |
| Use changequote() to temporarily turn off m4 quoting so that |
| i[345]86-*-go32 pattern in case statement remains unchanged. |
| * configure, {hp74x, m68k, mips, pa, sparc}/configure: |
| regenerated. |
| |
| Tue May 23 11:15:52 1995 Angela Marie Thomas <angela@cirdan.cygnus.com> |
| |
| * mips/Makefile.in (SCRIPT): added "SCRIPT = array.ld" so installs |
| work correctly. |
| |
| Mon May 22 21:33:49 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * ex93x: renamed to sparc. |
| * r3000: renamed to mips. |
| * hppro: renamed to pa. |
| * configure.in, configure: Use new directory names. |
| * config/default.mh: Remove '' in sed program_transform_name so |
| it actually works. |
| * doc/porting.texi: update doc. |
| |
| Wed May 17 17:25:53 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * doc/configure.in: converted to autoconf. |
| * doc/configure: New file, generated with autoconf 2.3. |
| |
| * Makefile.in, config/{ex93x, hp74x, hppro, m68k, |
| r3000}/Makefile.in (Makefile.in): Added config.status to |
| dependency list. |
| (config.status): New target. |
| |
| * m68k/Makefile.in: Build M68332BCC BSP. |
| |
| Wed May 10 18:43:21 1995 Stu Grossman (grossman@andros.cygnus.com) |
| |
| * glue.c: Change decl of end to char[] for some reason. |
| * (sbrk): Rewrite sbrk so that it works. |
| * (fstat): Return status indicating fd is for a tty. Makes stdio |
| work better. |
| * hppro/crt0.S (_sr4export): Retrieve rp from -24(sp), not |
| -18(sp). Note that -24 decimal == -18 hex... |
| * hppro/op50n-io.S: Add read and write interfaces to the rom |
| monitor. Unfortunately, the monitor doesn't seem to work... |
| * hppro/op50n.ld: Clean up lots of stuff. Define memory in a |
| nice way. Define stack and reserve space. Put heap after stack. |
| |
| Thu May 4 10:28:01 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * configure.in (AC_PREREQ): Changed to 2.3, since autoconf |
| versions prior to this generate code that AIX 4.X's sh can't |
| hack. |
| |
| * m68k/Makefile.in (BCC_BSP, BCC_OBJS): New BSP for M68332BCC. |
| * m68k/cpu32bug.S: New file, support for cpu32bug monitor used by |
| bcc. |
| * m68k/bcc.ld: Link with bcc.o |
| |
| Fri Apr 21 16:17:17 1995 Torbjorn Granlund <tege@rtl.cygnus.com> |
| |
| * hppro/{milli.S,divide.S,divI.S,divU.S,multiply.S,test-div.c, |
| test-dyncall.c,test-mul.c,remI.S,remU.S,dyncall.S}: Delete. |
| * hppro/divcnst-generic/*: Delete. |
| * hppro/divcnst-fast/*: Delete. |
| * hppro/Makefile.in: Delete junk. |
| |
| Tue Apr 18 11:22:47 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * m68k/{bcc.ld idp.ld, mvme135.ld, mvme162lx.ld}: Removed stack |
| section, moved __stack definition to the top level and set it |
| explicitly to the value appropriate to the target board. |
| Added __end symbol (needed for a.out toolchains). |
| |
| Mon Apr 17 12:48:48 1995 Stu Grossman (grossman@andros.cygnus.com) |
| |
| * hppro/w89k.ld: Move _stack to before `end' and `_end' so that |
| malloc doesn't trash the stack. |
| * hppro/w89k-io.c (outbyte): Make this be void, and remove return |
| value, which is useless anyway. |
| |
| Mon Apr 17 06:13:55 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * m68k/bcc.ld: New file, linker script for M68332BCC Business Card |
| Computer. |
| * m68k/Makefile.in: Install BCC linker script. |
| |
| * Makefile.in: Fixed typo. |
| |
| * hppro/configure.in: Changed AC_INIT file from crt0.s to crt0.S. |
| * hppro/configure: regenerated. |
| |
| Mon Apr 17 00:02:15 1995 Stu Grossman (grossman@andros.cygnus.com) |
| |
| * hppro/op50n.ld: Define _stack explicitly instead of implicitly |
| via common. |
| * hppro/{w89k-io.c w89k.h}: Use pointers to volatile for inp and |
| outp. Use correct port numbers for COM1 serial port. |
| |
| Fri Apr 14 16:56:35 1995 Ken Raeburn <raeburn@cujo.cygnus.com> |
| |
| * m68k/mc68ec.c (_exit): Use extended asm construct to get the |
| proper immediate-operand syntax for whatever the target assembler |
| configuration is. |
| * m68k/mvme.S (__IMMEDIATE_PREFIX__, IMM): Copy and use macro |
| definitions as in m68k/crt0.S. |
| |
| Thu Apr 13 16:48:46 1995 Angela Marie Thomas <angela@cirdan.cygnus.com> |
| |
| * Makefile.in: fixed clean rules such that they do not try to |
| clean ${SUBDIRS} if libgloss not supported on that target. |
| |
| Thu Apr 13 13:39:46 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * configure.in: Append new subdirectories to ${configdirs}. |
| (go32-*-*): Removed. |
| * configure: Regenerated. |
| |
| * m68k/mvme162lx.ld: Put __stack in ram, even though it's not |
| loaded. |
| |
| * m68k/Makefile.in: Don't hide how BSP objects are built. |
| |
| * glue.c (print, putnum): declared void. |
| |
| * {hppro,m68k}/Makefile.in: Use ${CC_FOR_TARGET} to link executables. |
| (LIBS_FOR_TARGET): Removed. |
| |
| * config/{default.mh, dos.mh} (NEWLIB_CFLAGS, NEWLIB_LDFLAGS): New |
| make variables, expands to compiler flags to find headers and |
| libraries if ${objroot}/newlib is present. |
| (CFLAGS_FOR_TARGET): Added ${NEWLIB_CFLAGS}. |
| (LDFLAGS_FOR_TARGET): Added ${NEWLIB_LDFLAGS}. |
| (LIBC_FOR_TARGET, LIBM_FOR_TARGET, LIBGCC_FOR_TARGET, |
| LIBS_FOR_TARGET): Removed. |
| |
| Thu Apr 13 11:51:17 1995 Torbjorn Granlund <tege@adder.cygnus.com> |
| |
| * m68k/Makefile.in (install): Use correct names for MVME* variables. |
| * configure.in: Delete `unknown' from m68* case. |
| |
| Thu Apr 13 11:47:01 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * m68k/crt0.S: initialize stack pointer to __stack before creating |
| inital stack frame. |
| |
| * m68k/{idp.ld, mvme135.ld, mvme162lx.ld}: Move __stack out of |
| bss, and into its own segment with an address at top of RAM. |
| |
| Wed Apr 12 12:36:28 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * {.,ex93x,hp74x,hppro,m68k,r3000}/{Makefile,configure}.in: |
| converted to autoconf. |
| * {.,ex93x,hp74x,hppro,m68k,r3000}/configure: New files, generated |
| from configure.in with autoconf 2.3. |
| |
| Mon Apr 10 22:50:48 1995 J.T. Conklin (jtc@rtl.cygnus.com) |
| |
| * m68k/{idp.ld, mvme135.ld, mvme162lx.ld}: Revert last change, |
| CONSTRUCTING and RELOCATING only work for linker scripts built |
| from ld/scripttmpl/*. |
| |
| * m68k/{idp.ld, mvme135.ld, mvme162lx.ld}: Changed to use |
| CONSTRUCTING and RELOCATING expressions so that the ctor/dtor |
| tables and etext, edata, and end variables are only done when |
| appropriate. |
| |
| Fri Apr 7 17:30:35 1995 Stu Grossman (grossman@andros.cygnus.com) |
| |
| * config/default.mh: Use $${srcroot} instead of ${SRCROOT} to get |
| inherited value. |
| * hppro/crt0.S: Remove static definitions of _stack and $global$. |
| Let the linker script define them in the BSS segment. |
| * hppro/w89k.ld: Use MEMORY to define memory regions. Add defs |
| for $global$ and _stack in the appropriate segments. |
| |
| Tue Apr 4 18:27:37 1995 Jason Molenda (phydeaux@cygnus.com) |
| |
| * Makefile.in (FLAGS_TO_PASS): pass down MAKEINFO. |
| |
| Thu Mar 30 18:10:53 1995 Kung Hsu <kung@mexican.cygnus.com> |
| |
| * ex93x/ex93x.ld: Add crt0.o in INPUT. |
| * ex93x/sparcl-stub.c: Add nop after bg insn. |
| * ex93x/sparc-stub.c: Add & 0x7f mask to all character input. |
| |
| Thu Mar 30 15:22:31 1995 Rob Savoye <rob@rtl.cygnus.com> |
| |
| * {hppro,m68k,ex93x,testsuite/libgloss}/configure.in: Add SRCROOT |
| variable. |
| * {hppro,m68k,ex93x,testsuite/libgloss}/Makefile.in: Add SRCROOT |
| variable. |
| * config/default.mh: Use SRCROOT to find the newlib includes. |
| |
| Tue Mar 28 19:54:26 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * configure.in, testsuite/configure.in: Add SRCROOT variable. |
| * glue.c: Change "char *path" to "const char *path" so it works |
| with the changes stat.h. |
| |
| Fri Mar 24 17:29:08 1995 Kung Hsu <kung@mexican.cygnus.com> |
| |
| * ex93x/ex93x.ld: The stubs module now can have different names for |
| different SPARClite chips. Use default one which is slite930.o. |
| |
| Mon Mar 20 15:49:46 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * m68k/mc68ec.c (_exit): Changed to take integer status argument. |
| |
| Fri Mar 17 17:48:42 1995 Kung Hsu <kung@mexican.cygnus.com> |
| |
| * config/default.h: add -I. to INCLUDES. |
| * ex93x/salib.c: to include sparclite.h. |
| * ex93x/sparclite.h: new file copied from gdb/sparclite. |
| |
| * config/default.mh: Fix INCLUDES to one level less '../'. |
| |
| Mon Mar 13 17:05:35 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * testsuite/libgloss.all/misc.c: Misc bug reports, mostly |
| soft-float tests. |
| |
| Wed Mar 8 19:00:18 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * m68k/{crt0.S, mvem135.ld, mvme162lx.ld, idp.ld}: Setup the stack |
| in the linker script. Use a macro to cover using '#' or '&' for |
| immediate values. |
| * m68k/{mvme135-asm.S, mvme162lx-asm.S}: Use a macro to cover |
| using '#' or '&' for immediate values. |
| * testsuite/libgloss.all/io.c: Add a test for read(). |
| |
| Thu Feb 16 21:13:34 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * glue.c: Make use _ansi.h, move to top level libgloss directory |
| form all other directories. |
| * Makefile.in: All Makefiles had SCRIPTS and OBJROOT added. |
| * {m68k,hppro,r3000)/Makefile.in: All build the test the same way |
| using OBJROOT. |
| * configure.in: All configure.in now edit the value to OBJROOT in |
| the Makefiles they produce. |
| * config/default.mh: Use OBJROOT for paths to test for fresh |
| binaries. |
| * configure.in: Add the testsuite directory. |
| * testsuite/config/{m68k.mt,mips.mt}: New target support for |
| MVME135, IDP, and Array targets. |
| |
| Thu Feb 9 21:45:33 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * testsuite/libgloss.all{varargs.c,varargs2.c}: Test cases for |
| traditional and ANSI varargs. (which currently fail) |
| * Makefile.in: Build intelligently and use dependancies so we |
| don't rebuild the world for each test run. |
| * configure.in: Make a .gdbinit file to run the tests and load via |
| gdb. |
| |
| Wed Mar 8 22:35:29 1995 Ken Raeburn <raeburn@cujo.cygnus.com> |
| |
| * m68k/idp.ld: Omit STARTUP line, since crt0.o is being supplied |
| by gcc. |
| |
| Thu Feb 23 12:08:19 1995 Ken Raeburn <raeburn@cujo.cygnus.com> |
| |
| * m68k/crt0.S: Use '&' instead of '#' for immediate operands. |
| * m68k/mc68ec.c: Ditto, in asm statements. |
| * m68k/mvme.S: Ditto. |
| |
| Wed Feb 1 23:55:39 1995 Angela Marie Thomas <angela@cirdan.cygnus.com> |
| |
| * Makefile.in (all): added "else" statements for Ultrix to work |
| |
| Fri Jan 27 10:48:20 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * testuite/{config,lib,libgloss.all}: DejaGnu testing support. |
| * testsuite/config/support.c: A minimal testing API for minimal |
| targets. |
| * testsuite/config/hppa.mt: Set build flags for PRO targets. |
| * libgloss.all/{float.c,memory.c,io.c,double.c,math.c,array.c}: |
| Test cases for libgloss and soft-float. |
| |
| * hppro/{w89k.ld,op50n.ld}: Set .text here now. |
| |
| Wed Jan 25 21:16:38 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * testsuite/{config,lib,libgloss.all}: The beginnings of a test |
| suite for low level stuff. A few test cases now all build. |
| |
| Thu Jan 12 13:02:12 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * config/default.mh: Change default path for linking in a freshly |
| built libc.a, libm.a, libgcc.a to work with -msift-float. |
| |
| * hppro/Makefile.in: Set MULTILIB so the -msoft-float safe |
| libraries get used. |
| |
| * m68k/Makefile.in: Use explicit rules, rather than redefining |
| .c.o. This is to force compiling with -m68000. |
| |
| Mon Jan 9 15:28:10 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * {hppro,m68k,r3000}/glue.c: Return correct value on receiving a |
| '\n' or '\r'. |
| |
| Fri Dec 30 15:05:03 1994 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * doc, doc/Makefile.in, configure.in: New directory. |
| * doc/porting.texi: New manual that explains porting the GNU tools |
| to embedded systems. |
| |
| Mon Dec 19 16:05:37 1994 Kung Hsu <kung@mexican.cygnus.com> |
| |
| * ex93x/Makefile.in: Use sparcl-stub.c instaed of sparc-stub.c, |
| which has hardware breakpoint support. |
| * ex93x/Makefile.in: Also generate slite930.o and slite931.o, instead |
| slite.o. |
| * ex93x/sparcl-stub.c: New file. |
| * ex93x/sparc-stub.c: Use latest from gdb/sparclite directory. |
| |
| Fri Dec 16 15:17:14 1994 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * r3000/crt0.S: Zero the bss section by words. |
| |
| * r3000/Makefile.in: Add in the rest of the support code for the |
| Array Tech board. |
| |
| * r3000/array.ld: Set the memory map for the Array Tech LSI |
| prototype. |
| |
| * r3000/array-io.c: Lowest level I/O code for Array Tech LSI |
| prototype using ROM entry points. |
| |
| Wed Dec 14 10:23:41 1994 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * hppro/crt0.S: Add _sr4export function so GDB calls work. |
| |
| * hppro/Makefile.in: Link in libc.a twice so atexit works(). |
| |
| * hppro/glue.c: Don't stub out __main anymore. |
| |
| Tue Dec 13 15:42:23 1994 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * r3000/Makefile.in: Look for both libgcc2 and libgcc. |
| |
| * r3000/glue.c,crt0.S,test.c: New support for for mips. |
| |
| * configure.in: Configure r3000 dir for a mips chip. |
| |
| Tue Dec 6 15:24:41 1994 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * hppro/divcnst-generic/*.S. Add .exit and .procend so it'll |
| compile. |
| |
| * hppro/Makefile.in: Link in the rest of the millicode routines. |
| |
| Mon Nov 21 20:21:48 1994 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * hppro/configure.in,config/dos.mh: Work for a canadian cross, |
| since xgcc is for the wrong architecture. |
| |
| Thu Nov 17 21:07:52 1994 Rob Savoye <rob@darkstar.cygnus.com> |
| |
| * config/default.mh: Find the corrrect libgcc2.a. |
| |
| * Makefile.in: Link in libgcc2.a by default. Build new millicode |
| routines. |
| |
| * divI.S, divU.S, multiply.S, remI.S, remU.S, test-div.c, |
| test-dyncall.c, test-mul.c: New millicode files for low level math |
| support. |
| |
| * test.c: Use printf so millicode gets exercised. |
| |
| * divcnst-fast/divU_10.S, divU_12.S, divU_3.S, divU_5.S, divU_6.S, |
| divU_9.S: Fast versions of some division routines. |
| |
| * divcnst-generic/divI_14.S, divI_5.S, divI_9.S, divU_14.S |
| divU_5.S, divU_9.S divI_10.S, divI_15.S, divI_6.S, divU_10.S, |
| divU_15.S, divU_6.S divI_12.S, divI_3.S, divI_7.S, divU_12.S, |
| divU_3.S, divU_7.S: Yet more millicode routines. |
| |
| Wed Nov 16 15:25:03 1994 Rob Savoye (rob@cygnus.com) |
| |
| * config/default.mh: Add default searches for the correct libc and |
| libm. |
| |
| * Makefile.in: Use ${LIBC_FOR_TARGET} and ${LIBM_FOR_TARGET} |
| |
| * hppro/w89k.ld,op50n.ld,Makefile.in: Don't try to link in libc |
| for the test program. |
| |
| Tue Nov 8 17:12:35 1994 Rob Savoye <rob@rtl.cygnus.com> |
| |
| * m68k/glue.c: Remove errno so there's no libc dependancies. |
| |
| * m68k/mvme135-asm.S: Moved setup_vectors and exceptionHandler |
| from mvme.S so the library can link without the stub. |
| |
| * m68k: New directory. Merge the idp, shared, and mvme135 |
| directories into one place. |
| |
| * config/default.mh: Use CC_FOR_TARGET for .S files so the |
| preprocessor actually gets run. |
| |
| * ex93x/crt0.s, ex93x/salib.c: Migrate changes from gdb/sparclite. |
| |
| Fri Sep 16 21:22:57 1994 Rob Savoye (rob@darkstar.cygnus.com) |
| |
| * shared, idp, mvme135: Support for Motorola IDP and MVME135 m68k |
| based target boards. Moved from newlib/stub. |
| |
| * ex93x: Move from newlib/stub/ex93x. Sparclite ex93x |
| board support. |
| |
| * hp74x, hppro: Add HP 742 & hp743 code "as is" with a working but |
| unfinished gdb stub. Add hppro for the WinBind and Oki Pa target |
| boards. |
| |
| * libgloss: Creation. A library for board support packages. The |
| Gnu low-level OS Support. Move mvme135/ChangeLog to here. |
| |
| Wed Sep 29 20:42:34 1993 Rob Savoye (rob@darkstar.cygnus.com) |
| |
| * mvme135/crt0.S, mvme135/glue.c: Moved to ../shared. |
| |
| Thu Apr 1 13:18:15 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * mvme135/mvme.S: Renamed exceptionhandler to exceptionHandler, which is |
| what mvme135-stub.c expects. |
| |
| Tue Mar 30 18:44:43 1993 Doug Evans (dje@poseidon.cygnus.com) |
| |
| * mvme135/mvme135-stub.c (initializeRemcomErrorFrame): Remove reference to |
| __STDC__. |
| |
| Tue Dec 29 10:15:33 1992 Ian Lance Taylor (ian@cygnus.com) |
| |
| * mvme135/mvme135-asm.S: new file. |
| mvme135-stub.c: moved all assembler routines into mvme135-asm.S. |
| Makefile.in: build mvme135-stub.o. |
| |
| * ChangeLog: created. |